Answer:
both
Explanation:
The three scientists' measurements are both accurate and precise.
Accuracy refers to how close a measurement is to the true value, and precision refers to how close multiple measurements are to each other.
In this case, the measurements are accurate because they are all very close to the true value of the standard meter bar, which is defined as 1 meter.
The measurements are precise because all the measurements are very close to each other. They are all within 0.01 m of each other, indicating that the scientists are able to consistently measure the same length, indicating that they are precise in their measurements.
It's worth noting that, even though the measurements are accurate and precise, it's still possible to have a small measurement error, this is because the true value of the standard meter is not 1.09 m or 1.08 m, but the International System of Units defined it to be exactly 1m, and the difference between the measurements and the true value is very small.
The measurements provided by the three scientists are precise but not accurate.
Explanation:The measurements provided by the three scientists can be analyzed in terms of accuracy and precision. Accuracy refers to how close the measured values are to the true value, while precision refers to how close the measured values are to each other. In this case, the measured values are 1.09 m, 1.09 m, and 1.08 m. These measurements are not accurate because they are not equal to the true value of a standard meter bar, which is 1.00 m. However, they are precise because they are very close to each other.
Although the measurements are not accurate, they are consistent with each other, indicating precision in the measurements. In scientific experiments, it is important to have both accuracy and precision. Accurate measurements ensure that the measurement is close to the true value, while precise measurements establish consistency and reliability in the experiment results.
In conclusion, the measurements provided by the scientists are precise but not accurate.
Learn more about Accuracy and Precision here:https://brainly.com/question/10883342
#SPJ2
In an experiment searching for the photoelectric effect, an incident beam of green light produced no ejected electrons from a metal. In order to eject electrons, the experimenter should?
A. increase the brightness of the light.
B. try blue light.
C. try yellow light.
D. give up on that particular metal.
E. decrease the brightness of the light.
To remove electrons in the photoelectric experiment, experimenters must try blue light. (B)
Definition of PhotoelectricThe photoelectric effect occurs when one of the metal plates is exposed to light, there is a current going to the other metal plate, as has been detected by the ammeter in the circuit above.
The ability of light to move electrons depends on its frequency. So if for example the light intensity is small but the frequency is large, the electrons will still be able to escape.
The energy that causes this movement of electrons is from the electromagnetic waves of light.
Learn more about photoelectricity at: brainly.com/question/26465043
#SPJ4
Nitrogen monoxide reacts with hydrogen gas to form nitrogen gas and water (vapor). Write a balanced equation for this reaction. The reaction is experimentally found to be (approximately) first-order in H
2
and second-order in NO. Write down the form of the experimentally-determined rate law and the units of the rate constant.
We must now strike a balance. This portion is all guesswork, but look at nitrogen on the right; there are two of them, so we put a "2" next to nitrogen monoxide.
We then count to check whether everything is balanced, and we'll notice that there are now two oxygens on the left and only one on the right, so we'll put a "2" next to the water. Count again, and lastly, a "2" next to the hydrogens will give us a balanced equation of:nitrogen monoxide. Now there are rate laws. If your reaction was A+B—>C+D. The rate law is equal to some empirically established constant "k" times the concentration of the reactants increased to some value. power (also empirically determined) (also experimentally determined). So the general form is as follows: Alpha and Beta are just the order of the reactants. Because the question specifies the sequence of each reactant, your rate law should look like this.
learn more about nitrogen monoxide here:
https://brainly.com/question/17164284
#SPJ4
Please helpppp nowww pleaseeee
Answer:
phosphorus=38.27%
hydrogen=2.47%
oxygen=59.26%
What is the percent yield if 18 grams of water are produced when 4 grams of hydrogen with excess oxygen?
To calculate the percentage yield of a reaction, you need to know the theoretical yield (the maximum amount of product that can be produced based on the stoichiometry of the reactants) and the actual yield (the amount of product that is actually produced in the reaction).
The balanced equation for the combustion of hydrogen gas (H2) with oxygen gas (O2) to form water vapour (H2O) is:
2H2 + O2 -> 2H2O
From the balanced equation, we can see that for every 2 moles of H2, 1 mole of H2O is produced. To convert 4 grams of H2 to moles, we use the molar mass of H2 which is 2.016 g/mol.
4g / 2.016 g/mol = 1.98 moles
Now we can calculate the theoretical yield of H2O. Since 2 moles of H2O are produced for every 2 moles of H2, the theoretical yield of H2O is:
1.98 moles x (2 moles H2O / 2 moles H2) = 1.98 moles
The molar mass of H2O is 18.02 g/mol, we can convert the theoretical yield of H2O from moles to grams:
1.98 moles x 18.02 g/mol = 35.7 g
To calculate the percentage yield, we divide the actual yield (18 g) by the theoretical yield (35.7 g) and multiply by 100:
(18 g / 35.7 g) x 100 = 50.5 %
Therefore, the percentage yield of the reaction is 50.5%.
Learn more about Percentage Yield here: https://brainly.com/question/29714892
#SPJ4
A gold atom i a phere with a diameter with 272 pm and a ma with 3. 27x 10^-13 ng. Calculate the denity of one gold atom in g/cm ^3
The answer is 3.88 g/cm³ for density.
How can you figure out a sphere's density?When you know the radius, you may use the formula volume = (4/3) π r3 to calculate the sphere's volume. Then, using the formula mass = volume density, you can calculate the mass by multiplying the volume by the density: mass = volume density. The formula mass = (4/3) π r3 density can also be used.
Given,
Radius of gold sphere is equal to 272 pm or 272 × 10 ⁻¹² m.
= 2.72 10 10 m 10²cm/m.
The diameter of an atom of gold is 2.72 × 10⁻⁸ cm,
volume of sphere = πr³
V(Au) = 4/3 · (2.72·10⁻⁸ cm)³ · 3.14.
The volume of one atom of gold is 8.43·10⁻²³ cm³
Mass of atom of sphere is equal to 3.27·10⁻¹³ ng · 10⁻⁹ g/ng
Gold atom mass is 3.27·10⁻²² g grams,
density of sphere = mass of gold atom ÷ Volume of gold atom
density of sphere = 3.27·10⁻²² g ÷ 8.43·10⁻²³ cm³
One gold atom has a density of 3.88 g/cm³
To learn more about density from given link
https://brainly.com/question/5419850
#SPJ4
what is a test variable and a outcome variable
pls help me
The test variable is manipulated while the outcome variable is observed.
What is a variable?When we use the term variable, our minds would have to go to something that has the ability to change. As such, when we are carrying out an experiment there is the variable that we manipulate and this would lead to a change in another variable.
The variable that we are able to manipulate as we are carrying out the experiment is what we call the test variable while the one that is changed due to this manipulation is called the out come variable.
Learn more about test variable:https://brainly.com/question/17344045
#SPJ1
geologists attempting to locate metallic mineral resources such as copper and iron will first consider the ____ of the rock and how it formed.
Minerals can be located using geochemical surveys and remote sensors that analyze satellite images. Following that, mining or quarrying is used to remove many minerals.
What do you do to find mineral resources first?Search for Potential Deposits, Locating areas that are likely to contain mineral deposits is one of the first steps in the exploration process. Prospective areas might be close to other known mineralization areas or to active mine sites because mineral deposits frequently form in clusters.Minerals can be located using geochemical surveys and remote sensors that analyze satellite images. Following that, mining or quarrying is used to remove many minerals. Pumping, however, can be used to extract liquid minerals like oil or gas.When choosing which deposit to pursue, some factors include the deposit's location and shape, the rock's strength, the grade of the ore, the costs associated with mining it, and the commodity's current market price.To learn more about minerals refer to:
https://brainly.com/question/15844293
#SPJ4
when hydrogen bonds form between water molecules, water____
When hydrogen bonds develop between the molecules, the boiling point of water rises. Hydrogen bonds are created when the electronegative oxygen atoms of two different water molecules combine.
Has a hydrogen atom that it can attach to in a separate water molecule. The molecules are hence strongly attracted to one another. In order to make a hydrogen bond, two atoms from either the same or a distinct molecule are required. Hydrogen bonds can form in two different ways: Between-molecule H-bonding molecules form hydrogen bonds. Hydrogen bonding is possible when the hydrogen atom in a molecule is attached to a strongly electronegative atom. One hydrogen atom in water is wedged between two oxygen atoms, creating a solid bond with the following water molecule.
Learn more about molecule here
https://brainly.com/question/19556990
#SPJ4
What is the kinetic energy a car with a mass of 1500kg running with a velocity of 20m s to the east?.
The kinetic energy of a car with a mass of 1500 kg running at a velocity of 20 m/s to the east is 60000J (Joules).
The kinetic energy of an object is the energy it possesses due to its motion. It is calculated by using the formula KE = 0.5 * m * v^2, where m is the mass of the object in kilograms and v is its velocity in meters per second.
So, for a car with a mass of 1500 kg running with a velocity of 20 m/s to the east, the kinetic energy can be calculated as follows:
KE = 1/2 * 1500 kg * (20 m/s)^2
KE = 60000 J
By plugging these values into the formula, we can find that the car's kinetic energy is 60000 J (Joules). It's worth noting that kinetic energy is a scalar quantity and has no direction, so the velocity's direction (east) does not affect the calculation.
To know more about Kinetic energy click here:
https://brainly.com/question/26472013#
#SPJ4
In area of higher core, what help you maintain healthy behavior? Conider your peronal knowledge about what it mean to be healthy and your attitude and belief. Then conider the other level of the ocioecological model—conider how you are upported by friend and family, your chool community and living ituation, intitution to which you belong, and local or national policie
A healthy behavior can be maintained by maintaining healthy relationships with supportive friends and family, keeping good hygiene, having enough sleep, exercising etc.
Maintaining a healthy behavior is very important not just for our emotional and mental health but also for our overall physical as well as social well being too. Our behavior reflects our attitude as well as our beliefs.
A healthy behavior can be maintained by healthy social interaction amongst our peers, supportive friends, family and also in the community as well as institution which we are a part of. One can also maintain healthy behavior by adopting healthy habits like exercising, sleeping on time, keeping good hygiene etc.
To know more about healthy behavior here
https://brainly.com/question/16939543
#SPJ4
How many Br- ions are present in 1.00 moles of FeBr3? a. 1.81E24 b. 6.02E23 c. 6.02E25 d. 12.04E23
B) The number of Br- ions present in 1.00 moles of FeBr3 is 6.02E23.
To find the number of Br- ions present in 1.00 moles of FeBr3, we need to first determine the number of moles of Br- ions present in the compound. FeBr3 is a compound that contains 1 Br- ion per formula unit.
To find the number of moles, we can use the formula:
moles = number of atoms / Avogadro's number (6.02E23)
The number of moles of Br- ions in 1.00 moles of FeBr3 is:
1.00 moles x (1 Br- ion / 1 formula unit) = 1.00 moles
So, the number of Br- ions present in 1.00 moles of FeBr3 is 6.02E23 ions.
For more questions like Ions click the link below:
https://brainly.com/question/7621383
#SPJ4
The radius of a barium atom is 217
pm. How many barium atoms would
have to be laid side by side to span a distance of 2.60 mm?
12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm
What is barium atoms?Barium can be defined as a chemical element with the symbol Ba and atomic number 56.
To find the number of barium atoms that would have to be laid side by side to span a distance of 2.60 mm.
we need to divide the distance by the radius of one barium atom:
2.60 mm / 217 pm = 12,005
Therefore, 12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm.
Learn more about barium atoms here: brainly.com/question/23694560
#SPJ1
Rearrange the work equation and show the equation for force.
Work equation: W=Fxd
Answer:
Force=Work done÷ distance travelled
Explanation:
To do this, you want to make the Force variable on its own so you divide d on both sides to get F=W/d
Hope this helps.
The fact that most compounds of this chemical class with synthesized from the combination of carbon and water accounts for the derivation of the term
Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.
Water is a compound because it is made up of two elements: hydrogen and oxygen. Water, on the other hand, is not the same as oxygen or nitrogen. While water is a liquid, oxygen and nitrogen are gases. To be more specific, all quantitative estimates are made for glucose, the most important hexose in human metabolism. Organic compounds are those with a carbon atom backbone, whereas all other compounds are classified as inorganic. Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.
learn more about Water here:
https://brainly.com/question/28465561
#SPJ4
Which prediction best shows what the population could look like after many generations? What caused it to change?
Prediction 1 best shows what the population could look like after many generations. Because, the long beak traits is having more life time.
What is genetic traits ?Each characteristics in a living thing is created by a respective genetic coding in its body. The genetic code which is responsible for a particular behavior or appearance is called a genetic trait.
Here, the prediction 1 is best . It already saying that long-beak hummingbirds are more likely to survive, that baby survived long enough to pass on its mutation, so the long-beak trait became more common over generations.
Prediction 2 says abut a genetic trait which is less fit to survive. Hence, cannot affect the next generation population. Therefore, prediction 1 is best.
Find more on genetic traits:
https://brainly.com/question/29679846
#SPJ1
Your question is incomplete. But your complete question probably was:
Prediction 1 :Two hummingbirds with short or medium beaks had a baby with a mutation in its genes for the long-beak trait.
Prediction 2 is best. A hummingbird could have been born with a mutation in its genes for the long-beak trait and lived for a little while.
You have 20.0 G of sodium you want to Nixes sodium with chlorine to create the salt NaCl using percent composition determine what mass of chlorine you need to create the maximum possible amount of NaCl
The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.
How determine the mass of chlorine?To determine the mass of chlorine needed to create the maximum possible amount of NaCl, we must first look at the percent composition of sodium chloride. Sodium chloride is composed of 58.44% Na and 41.56% Cl. This means that for every 100 grams of sodium chloride, 58.44 grams is sodium and 41.56 grams is chlorine. Since we have 20.0 g of sodium, we can calculate the amount of chlorine needed to create the maximum amount of sodium chloride. First, convert 20.0 g of sodium to a percentage: 20.0 g of sodium is 33.2% of 58.44%. Then, multiply 41.56 grams of chlorine by 33.2%: 41.56 g Cl x 33.2% = 13.7 g Cl. Therefore, the maximum amount of sodium chloride that can be created from 20.0 g of sodium and 13.7 g of chlorine is 34.1 g. To create this amount of sodium chloride, we need 20.0 g of sodium and 13.7 g of chlorine.To learn more about mass of chlorine refer :
brainly.com/question/30314303
#SPJ1
The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.
How determine the mass of chlorine?To determine the mass of chlorine needed to create the maximum possible amount of NaCl, we must first look at the percent composition of sodium chloride.
Sodium chloride is composed of 58.44% Na and 41.56% Cl. This means that for every 100 grams of sodium chloride, 58.44 grams is sodium and 41.56 grams is chlorine.
Since we have 20.0 g of sodium, we can calculate the amount of chlorine needed to create the maximum amount of sodium chloride.
First, convert 20.0 g of sodium to a percentage: 20.0 g of sodium is 33.2% of 58.44%. Then, multiply 41.56 grams of chlorine by 33.2%: 41.56 g Cl x 33.2% = 13.7 g Cl.
Therefore, the maximum amount of sodium chloride that can be created from 20.0 g of sodium and 13.7 g of chlorine is 34.1 g.
To create this amount of sodium chloride, we need 20.0 g of sodium and 13.7 g of chlorine.
To learn more about mass of chlorine refer :
https://brainly.com/question/28440406
#SPJ1
Margarita decides to enter her school's science fair. She has always loved flowers and wants to incorporate them into her
project. In the end, Margarita decides to test the effectiveness of different types of plant food (fertilizer) on a certain type of
rose bush. Her goal is to determine which fertilizer produces the tallest rose bushes with the greatest number of flowers.
Describe how Margarita might set up her experiment. Discuss the actions Margarita should take to get reliable data.
Answer: Statistics is the best way for Margarita to organize, interpret, and present her data.
Explanation:
What are the two types of carbohydrates and food sources?.
Answer: simple and complex.
Explanation:These are also called simple sugars. They're found in refined sugars, like the white sugar you see in a sugar bowl. If you have a lollipop, you're eating simple carbs.
If the molecular mass of the salt is 136 g/mol, how many moles of anhydrate are there?
if the mass of the sample is 272 grams, the number of moles of anhydrate present would be:
moles = 2
What are moles?Generally, To determine the number of moles of anhydrate present, you would need to know the mass of the sample. If you have that information, you can use the formula:
moles = mass / molar mass
Where
mass is the mass of the sample in grams and
molar mass is the molar mass of the salt (in this case, 136 g/mol).
For example, if the mass of the sample is 272 grams, the number of moles of anhydrate present would be:
moles = 272 / 136
= 2
Please provide me with more information so that I could give you more accurate answer.
Read more about moles
https://brainly.com/question/26416088
#SPJ1
An atom is neutral. Its nucleus contains two protons and two neutrons. How many electrons does the atom have?
A. Three
B. Four
C. Two
D. Zero
Answer:
C Two
Explanation:
no of proton = no of electron
What is hydropower development?.
Answer:
Hydropower technologies generate power by using the elevation difference, created by a dam or diversion structure, of water flowing in on one side and out, far below, on the other.
which elements are most likely to react in the same manner in a chemical reaction?
The elements most likely to react in the same manner in a chemical reaction are those that are in the same group. It because of the same number of valence electrons.
The elements in the same group are most likely to react in the same manner in a chemical reaction. It is because their outer shells have the same number of valence electrons. In fact, the electrons are the component of an atom that is involved in reactions. Meanwhile, the protons and neutrons in an atom's nucleus are not involved in reactions.
For example:
Elements in the Group 1 (Alkali metals) contains Li, Na, K, Rb, Cs, and Fr.- They all have one valence electron, which they easily lose when forming ions.
- They are easily reacted with water
- They possess low melting points and densities
- They are good electrical conductors.
Here to learn more about the Elements of the Periodic Table:
https://brainly.com/question/25916838
#SPJ4
PRACTICE Problems
Predict whether the following single-replacement reactions will occur. If a reaction occurs,
write a balanced equation for the reaction.
21. K(s) + ZnCl₂(aq) →→→
Single-replacement reactions will occur if the reaction below occurs
K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.
What is Single-replacement reaction?This is also referred to as single displacement reaction and it is referred to as a reaction in which one element is substituted for another element in a chemical reaction.
Single-replacement reactions will occur in the reaction below because it follows and obeys this condition which is:
A + BX ⇒ B + AX
K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.
Here we can deduce that zinc was substituted which is therefore the reason why it was chosen as the correct choice in this scenario.
Read more about Single-replacement reactions here https://brainly.com/question/7959057
#SPJ1
PLEASE HELP ASAP!!!!
ANSWERS FOR THE LAST PHOTO
W
X
Y
Z
An atom is made up of three subatomic particles namely; protons, neutrons and electrons.
The proton is the positively charged particle in the nucleus of the atom while the electron is the negatively charged particle surrounding the nucleus.
The number of neutrons can be calculated by subtracting the atomic number of the element from the mass number.
In question 1 of the above image, no of neutrons = 39 - 19 = 20 neutronsIn question 2, no of neutrons = 207 - 82 = 125 neutronsLearn more about neutrons at: https://brainly.com/question/28992636
#SPJ1
What is the major attractive force that exists among different I2 molecules in the solid? Select one: A. covalent-ionic interactions. B. Dispersion forces. C.
The claim that sense neurons' cell bodies are located in the grey commissure, an expanded region of the dorsal root.
Dorsal nerve roots provide sensory neural signals to the central nervous system from the peripheral nervous system. Anatomically, a dorsal root ganglion develops from the dorsal root of the spinal nerves. For the central nervous system to react, they transmit sensory data from multiple peripheral receptors. It is generally recognised that DRG has a role in chronic pain. The first description of anaesthesia infiltration of the DRG was made in 1949. It has been possible to target the DRG using the dorsal root entry zone (DREZ), a nearby related neural target, dorsal rhizotomy or gangliectomy, conventional radiofrequency denervation, pulsed radiofrequency, and steroid injection.
Learn more about Neurons' here:
https://brainly.com/question/29816540
#SPJ4
Given g(x) = f(x) + k, enter the value for k that transforms the function f into g?.
The value for k that transforms the function f into g is -3.
What is the meaning of value for k?
Value for k is a term used in mathematics to refer to the number of elements in a set. The value of k depends on the context of the problem. It could be any numerical value, depending on what it is being used for.
Given : g(x) = f(x) + k
Taking two points from the graph (1,0) and (-1, 2)
slope = [tex]\frac{2-0}{-1-1}[/tex] = [tex]\frac{2}{-2}[/tex] = -1
The equation will be,
y-0 = -1 (x-4)
y= -x + 4
f(x)= -x + 4
So, g(x)= f(x) + k
-x + 1= -x + 4 + k
k= 1+4
k= -3
Therefore, the value for k= -3.
To learn more about value for k from the link
https://brainly.com/question/24379564
#SPJ4
In the activity series, the more active elements are found
(a) at the bottom
(b) in the middle
(c) at the top
(d) both (a) and (c)
In the activity series, the more active elements are found at the bottom and at the top. Option d.
The activity series is a way of organizing elements according to their reactivity.
The elements found at the bottom of the series are the most active, and those found at the top are the least active.
Knowing the activity series can help us predict how a reaction will proceed, and can be a useful tool when determining which compounds are most likely to form in a given reaction.
The elements at the bottom of the activity series are the most active, and the elements at the top are the least active. Knowing the activity of elements can help you understand the chemical properties of different materials and how they may interact with each other.
To learn more about series, click here:
https://brainly.com/question/14129976
#SPJ4
Rank these compounds by their expected solubility in hexane, C_6H_14.
Based on its solubility in hexane, C₆H₁₄. Then the order of these compounds is C₃H₈ → CH₃OH → H₂O
Non-polar compounds are compounds that are formed due to the existence of a bond between electrons in the elements that form them. This happens because the bonding elements have the same or nearly the same electronegativity value.
Polar compounds have a high dipole moment, while nonpolar compounds do not have a dipole moment. This difference causes the two solutions to not bond.
Hexane is non-polar.
So, C₃H₈ is the easiest to dissolve because C₃H₈ is also non-polar.
H₂O is more polar than CH₃OH. So, CH₃OH will dissolve more easily than air. air will at least dissolve.
So that the order based on its solubility with hexane is C₃H₈, CH3OH, H₂O.
Your question may incomplete, for complete questions it's in the picture.
Learn more about non-polar compounds at https://brainly.com/question/1426521
#SPJ4
How many grams are in 2. 0 moles of H2O?.
Answer:
36g
Explanation:
H2 = 2
O = 16
18 = Mr of H2O
mass = moles x Mr
mass = 2 x 18
mass = 36g
acid rain is the result of pollutants being released into the____
The acid rain is the result of pollutants being released into the atmosphere.
What is acid rain ?
Nitric and sulfuric acids, which are included in acid rain and other dry, abrasive particles that fall to the ground, can harm the surfaces of sculptures, buildings, and other man-made structures. Metal is corroded by the acidic particles, which also hasten the aging of stone and paint.
What is pollutants ?
A material that is present in concentrations that could be harmful to creatures (including people, animals, and plants) or go beyond the limits of acceptable environmental quality is referred to as a pollutant. Frequently, the words "term" and "contaminant" are used interchangeably.
Therefore, acid rain is the result of pollutants being released into the atmosphere.
Learn more about acid rain from the given link.
https://brainly.com/question/30278887
#SPJ4
