2 FONS
How does the electric force between two charged particles change if the
distance between them is increased by a factor of 22
A. It increases by a factor of 4.
B. It increases by a factor of 2.
C. It decreases by a factor of 4
O
D. It decreases by a factor of 2.
SUB

Answers

Answer 1

Answer:

C. It decreases by a factor of 4

Explanation:

F1 = kq1*q2/r²

F2 = kq1*q2/(2r)² = kq1*q2/(4r²) = kq1*q2/(r²*4)  = F1/4


Related Questions


Which best explains how heat plays a role in the movement of materials within Earth's interior?

Answers

Answer:

Hot material near the core is less dense and rises, when it cools, it becomes more dense and sinks.

Explanation:

This best explains how heat plays a role in the movement of materials within Earth's interior because it's how convection works. Convection is the circular motion that happens when warmer air or liquid which has faster moving molecules, making it less dense rises, while the cooler air or liquid drops down. Convection currents within the earth move layers of magma, and convection in the ocean creates currents.

Earth’s interior is like a closed chamber, hot material near Earth's surface is more denser and sinks, and when it cools, it becomes less dense and Rises.

What is Convection?

Convection is the process of heat transfer by the bulk movement of molecules within fluids such as gases and liquids. The heat transfer take place from solid to no solid material. like air and water.

As we take example of home. In home heat take nearer the roof and cold air will be nearer to the flour. It is because of hot is less denser then the cold air. Hot air will become less denser and move towords upside. Cold air become denser move towards down.

Similarly, on earth. Nearer to earth hot materials are more dense and sinks. When it cools, it become less dense and rises.

To find more about Heat flow, refer the link below:

brainly.com/question/15394654

#SPJ2

Dry chemical hand warmers utilize the oxidation of iron to form iron oxide according to the following reaction: 4Fe(s)+3O2(g)→2Fe2O3(s) Standard thermodynamic quantities for selected substances at 25 ∘C Reactant or product ΔH∘f(kJ/mol) Fe(s) 0.0 O2(g) 0.0 Fe2O3(s) −824.2 Calculate ΔH∘rxn for this reaction.

Answers

Answer:

-1648.4 kJ/mol

Explanation:

Based on Hess's law:

ΔHr = ∑n×ΔH°f(products) - ∑n×ΔH°f(reactants)

In the reaction:

4Fe(s) + 3O₂(g) → 2Fe₂O₃(s)

ΔHr = 2 ΔH°f {Fe₂O₃} - (4ΔH°f {Fe(s)} + 3ΔH°f{O₂(g)}

As:

ΔH°f {Fe₂O₃} = -824.2kJ/mol

ΔH°f {Fe(s)} = 0.0kJ/mol

ΔH°f{O₂(g)} = 0.0kJ/mol.

Thus,

ΔHr = 2 ₓ -824.2kJ/mol =

-1648.4 kJ/mol

Answer:

-1648.4 kJ

Explanation:

The product has the only nonzero heat of formation, so it is the only value needed to calculate the enthalpy of this reaction. Normally, you would want to express the enthalpy of a reaction with respect to one mole of a chemical species, whether it is a reactant or product. However, since the balanced chemical equation contains only coefficients greater than 1, you should consider how the enthalpy relates to one mole of each substance according to the coefficients. In other words,  − 1648.4  kJ  of heat is released when 4  mol  of  Fe  reacts with 3  mol  of  O2  to produce 2  mol  of  Fe2O3 .

WILL GIVE BRAINLIEST!!!!! will give brainliest!!!! ******According to the reaction in question I above, how many grams of solid copper will theoretically be

produced when 14.4 g of aluminum are reacted with 14.4 g of copper (II) sulfate? Which reactant is the

limiting reactant? Show your work. Be sure to include units!

Answers

Answer:

5.73 g Cu

Explanation:

M(CuSO4) = 159.6 g/mol

M(Al) = 27.0 g/mol

M(Cu) = 63.5 g/mol

14.4 g Al * 1 mol/27.0 g = 0.5333 mol Al

14.4 g CuSO4 * 1 mol/159.6 g = 0.0902 mol CuSO4

                                2 Al         +     3CuSO4 ------->  3Cu + Al2(SO4)3

from reaction           2 mol               3 mol

given                     (0.5333 mol )x       0.0902 mol

needed                   0.0601 mol

x= 2*0.0902/3 = 0.0601 mol   Al

Al is excess, CuSO4 is a limiting reactant.

                               2 Al         +     3CuSO4 ------->  3Cu + Al2(SO4)3

from reaction                               3 mol                  3 mol

given                                            0.0902 mol         x mol

x = 0.0902 mol Cu

0.0902 mol Cu * 1 mol/63.5 g Cu = 5.73 g Cu

Hot coffee in a mug cools over time and the mug warms up. Which describes the energy in this system? The average kinetic energy of the particles in the mug decreases. The average kinetic energy of the particles in the coffee increases. Thermal energy from the mug is transferred to the coffee. Thermal energy from the coffee is transferred to the mug.

Answers

Answer:

d

Explanation:

Answer:

D

Explanation:

Edge 2021

Why is tape attracted to my skin? Give explanation

Answers

Answer:

Since the tape has extra electrons, it has a negative charge. When you move your finger close to the tape, electrons in your skin are repelled and move away. This makes the skin on your finger tip have a slight positive charge. Since positive and negative attract, the tape moves toward your finger.

How many grams of the salt CaF2 (g) are formed when 15.7 mL of 0.612 M KF reacts with an excess of aqueous calcium bicarbonate (Ca(HCO3)2) via a metathesis reaction?

Answers

Answer:

[tex]m_{CaF_2}0.375gCaF_2[/tex]

Explanation:

Hello,

In this case, for the studied reaction:

[tex]2KF+Ca(HCO_3)_2\rightarrow CaF_2+2KHCO_3[/tex]

Thus, the first step is to compute the reacting moles of potassium fluoride by using its volume and molarity:

[tex]n_{KF}=0.0157L*0.612\frac{mol}{L} =9.61x10^{-3}molKF[/tex]

Then, we apply the 2:1 molar ratio between potassium fluoride and calcium fluoride to compute the produced moles of calcium fluoride:

[tex]n_{CaF_2}=9.61x10^{-3}molKF*\frac{1molCaF_2}{2molKF} =4.80x10^{-3}molCaF_2[/tex]

Finally, by using the molar mass of calcium fluoride (78.07 g/mol) we can compute its produced grams:

[tex]m_{CaF_2}=4.80x10^{-3}molCaF_2*\frac{78.07gCaF_2}{1molCaF_2} \\\\m_{CaF_2}0.375gCaF_2[/tex]

Best regards.

Choose the slope and Y intercept that correspond with the graph

Answers

y=3x + 4

Explanation:

Where 3 is the slope and 4 is the y-intercept

What must happen for an ionic bond to be created between two elements?

Answers

Answer:

they must be heated

Explanation:

Predict the order of elution if you were to attempt to separate using column chromatography on silica gel and with a gradient eluent system starting with petroleum ether and slowly increasing MTBE % over time.

Answers

Answer:

Follows this order: B=> A => C.

Explanation:

NB: kindly check the attachment for the diagram of compounds A, B and C.

Elution is a very important concept in chromatography separation techniques. It deals with the use of eluent in the removal of an adsobate from an adsorbent. The principle behind Elution is just about how polar the solvent is.

So, in this question Compound B will go with the Elution first because of its polarity. Compound B has lesser polarity as compared to Compounds A and B.

Compound A will then elutes second because of its polarity too as resonance increases its polarity.

Last, compound C elutes because it has the highest polarity which is caused by electronegative atoms.

Which compound would you expect to be least soluble in water? Explain.
a. CCl4
b. CH3Cl
c. NH3
d. KF

Answers

Answer:  a.CCl4 aka carbon tetrachloride

Explanation:

ionic compounds and polar molecules can be dissolved in water which is a polar solvent.

choice d (KF) is a salt (an ionic compound) and can be dissolved in water /(K+ and F- ions would be formed in water).

choice c (NH3 or ammonia) is a very polar molecule and thus can be dissolved in water(Hydrogen bonding).

choice b (CH3Cl) is slightly polar because the atoms surrounding the central carbon atom are different(3 H atoms and 1 chlorine atom) and can be dissolved in water(Dipole-dipole interaction).

choice a is nonpolar and cannot be dissolved in water.

What mass of carbon dioxide is produced from the complete combustion of 7.30×10−3 g of methane?

Answers

We know that the reaction goes to completion, so all the methane will be reacted. To find the mass of carbon dioxide used, we can use the number of moles from the above equation, and the molecular weight of CO2 (= 44.009 g/mol). The mass of CO2 produced is 3.29*10^-3g.

what type of bonds do compounds formed from non metal consist of?​

Answers

Compounds formed from non-metals consist of molecules. The atoms in a molecule are joined together by covalent bonds. These bonds form when atoms share pairs of electrons.

The solubility of N2 in water at a particular temperature and at a N2 pressure of 1 atm is 6.8 × 10–4 mol L–1. Calculate the concentration of dissolved N2 in water under normal atmospheric conditions where the partial pressure of N2 is 0.78 atm.

Answers

Answer:

The correct answer is 5.30 * 10^-4 mol per L.

Explanation:

Based on Henry's law, in a solution solubility of the gas is directly proportional to the pressure, that is, C is directly proportional to P. Here P is the pressure and C is the concentration of the dissolved gases.  

Therefore, it can be written as,  

C2/C1 = P2/P1

Here, C1 is 6.8 * 10^-4 mol/L, P1 is 1 atm and P2 is 0.78 atm, then the value of C2 obtained by putting the values in the equation,  

C2/(6.8*10^-4) = 0.78/1

C2 = 0.78 * 6.8*10^-4

C2 = 5.30 * 10^-4 mol per L.  

Hence, the concentration of dissolved nitrogen at 0.78 atm is 5.30*10^-4 mol/L.  

At 25.0 °C the Henry's Law constant for sulfur hexafluoride (SP) gas in water is 2.4x 10 M/atm Calculate the mass in grams of SFo, gas that can be dissolved in S25. ml. of water at 25.0 C and a SF, partial pressure of 1.90 atm Be sure your answer has the correct number of significant digits.

Answers

Complete Question

The complete question is shown on the first uploaded image

Answer:

The mass is [tex]m = 0.0349 \ g[/tex]

Explanation:

From the question we are told that

   The Henry's Law constant is  [tex]k = 2.4 *10^{10} M/atm[/tex]

   The volume of water is [tex]V = 525 \ ml = 0.525 \ L[/tex]

   The partial pressure is  [tex]P = 1.90 \ atm[/tex]

   The temperature is [tex]T = 25 ^oC[/tex]

Henry's  law is mathematically represented as

       [tex]C = P * k[/tex]

Where C is  the concentration of sulfur hexafluoride(SP)

substituting value

        [tex]C = 1.90 * 2.4*10^{-4}[/tex]

        [tex]C = 4.56*10^{-4} \ M[/tex]

The number of moles of  SP is mathematically represented as

        [tex]n = C * V[/tex]

substituting value

       [tex]n = 0.525 * 4.56*10^{-4}[/tex]

       [tex]n = 2.39 *10^{-4} \ moles[/tex]

The mass of SP that dissolved is

          [tex]m = n * Z[/tex]

Where Z is the molar mass of SP which has a constant value of

           [tex]Z = 146 g/mole[/tex]

So

         [tex]m = 2.394*10^{-4} * 146[/tex]

         [tex]m = 0.0349 \ g[/tex]

If a solution containing 23.81 g of lead(II) acetate is allowed to react completely with a solution containing 7.410 g of sodium sulfate, how many grams of solid precipitate will be formed g

Answers

Answer:

The correct answer is 15.80 grams.

Explanation:

The reaction taking place in the given question,  

Pb(CH₃COO)₂ + Na₂SO₄ ⇒ PbSO₄ + 2NaCH₃COO

The number of moles can be calculated by using the formula,  

n = weight / molecular mass

Based on the given question, the weight of lead (II) acetate is 23.81 grams and the weight of sodium sulfate is 7.410 grams.  

The number of moles of Pb(CH₃COO)₂ is,  

n = 23.81 g / 325.29 g/mol = 0.0732 moles

The number of moles of Na₂SO₄ is,  

n = 7.410 g / 142.04 g/mol = 0.0521 moles

As one mole of lead (II) acetate needs one mole of sodium sulfate. Therefore, 0.0732 moles of lead (II) acetate needs 0.0732 moles of sodium sulfate.  

However, as sodium sulfate is less, that is, 0.0521, therefore, Na₂SO₄ is a limiting reactant.  

One mole of sodium sulfate produces one mole of PbSO₄. So, 0.0521 moles of Na₂SO₄ produces 0.0521 moles of PbSO₄.  

Now the mass of PbSO₄ is,  

mass = moles × molecular mass

mass = 0.0521 × 303.26 g/mol

mass = 15.80 grams.  

Round off the following measurement to three significant digits: 29.950g

Answers

Answer:

30.0 g.

Explanation:

Hello,

In this case, for us to round the given number off to three significant figures, we firstly realize it has initially five significant figures. Thus, cutting at the third digit, which is the second nine, we will have 29.9 g, nonetheless, as a five is after such nine, we should round the nine to ten, so the result is 30.0 g.

Best regards.

Determine if the following salt is neutral, acidic or basic. If acidic or basic, write the appropriate equilibrium equation for the acid or base that exists when the salt is dissolved in aqueous solution. If neutral, write only NR. LiNO₃

Answers

Answer:

It is neutral (NR)

Explanation:

Salts are formed when the ionizable hydrogens in an acid is replaced by metallic or ammonium ions from bases. The reaction is known as a neutralization reaction.

The nature of a salt formed from this reaction depends on the nature of the reacting acid and base.

If the reaction is between a strong acid and strong base, the salt produced is a neutral salt.

If the reaction occurs between a strong acid and a weak base, the salt produced is acidic.

If the reaction occurs between a strong base and a weak acid, the salt produced is a basic salt.

Considering the salt above, LiNO3.

On hydrolysis, addition of water, the following products are obtained:

LiNO3 + H2O ----> LiOH + HNO3

The products obtained, LiOH and HNO3 are a strong base and a strong acid respectively. Therefore, the salt, LiNO3, is a neutral salt.

The salt, LiNO₃ is a neutral, NR salt as it's a salt formed from the reaction of a strong acid and a strong base.

In neutralisation reactions, acids and bases react to form salt and water.

However, the salt formed may be acidic, basic or neutral. This is dependent on the type of acid and base which form the salt.

A strong acid and a strong base react to yield a neutral salt like, LiNO₃.

The equilibrium equation when LiNO₃ is dissolved in aqeous solution is;

LiNO₃ + H2O ==>. LiOH + HNO₃

Evidently, LiOH and HNO₃ are an example strong base and acid respectively.

Read more:

https://brainly.com/question/2254059

If the Moon rises at 7 P.M. on a particular day, then approximately what time will it rise six days later?

Answers

Answer:

below

Explanation:

28th 10;24 am

If the Moon rises at 7 P.M. on a particular day, then approximately what time will it rise six days later at 12A.M.

How much time changes between Moon rises from one day to the next?

This movement is from the Moon's orbit, which takes 27 days, 7 hours and 43 minutes to go full circle. It causes the Moon to move 12–13 degrees east every day. This shift means Earth has to rotate a little longer to bring the Moon into view, which is why moonrise is about 50 minutes later each day.

So knowing that moonrise is about 50 minutes later each day, we have:

[tex]7+50 minutes = 7:50\\8:40\\9:30\\10:20\\11:10\\12:00 A.M[/tex]

See more about moon at brainly.com/question/13538936

#SPJ2

Propane (C3H8) is widely used in liquid form as a fuel for barbecue grills and camp stoves. For 67.7 g of propane, determine the following.(a) Calculate the moles of compound.mol(b) Calculate the grams of carbon.g

Answers

Answer:

A. 1.54 mole.

B. 55.39g of carbon

Explanation:

A. Determination of the number of mole in 67.7g of C3H8.

Mass of C3H8 = 67.7g

Molar mass of C3H8 = (3x12) + (8x1) = 44g/mol

Number of mole of C3H8 =..?

Number of mole = Mass/Molar Mass

Number of mole of C3H8 = 67.7/44

Number of mole of C3H8 = 1.54 mole

B. Determination of the mass of carbon in the compound.

This is illustrated below:

The mass of C in compound can be obtained as follow:

=> 3C/C3H8 x 67. 7

=> 3x12 / 44 x 67.7

=> 36/44 x 67.7

=> 55.39g

Therefore, 55.39g of carbon is present in the compound.

Arrange the measurements from least to greatest

Answers

Answer: 1.8 micrograms, 1.8 milligrams, 1.8 grams, 1.8 kilograms

Explanation:

One of the radioactive isotopes used in chemical and medical research is sulfur-35, which has a half-life of 87 days. How long would it take for 0.25 g to remain of a 1.00 g sample of sulfur-35

Answers

Answer:

Time taken = 174 days

Explanation:

Half life is the time take for a subsrtance taken to decay to half of it's origial or initial concentration.

In this probel, the haf life is 87 days, this means that after evry 87 days, the concentration or mass of sulfur-35 decreases by half.

If the starting mass is 1.00g, then we have;

1.00g --> 0.5g (First Half life)

0.5g --> 0.25g (Second half life)

This means that sulphur-335 would undergo two half lives for 0.25g to remain.

Total time taken = Number of half lives  * Half life

Time taken = 2 * 87

Time taken = 174 days

The chemical equation and thermodynamic data for the melting of tungsten are given above. Based on this information, which of the following provides the best predictions correc whether a sample of pure tungsten will melt at 3723 K?
A. The sample will not melt because T > H/s
B. The sample will not melt because T< H/s
C. The sample will mel because T>
D. The sample will mel because T

Answers

Based on the information above provided, the best predictions correct whether a sample of pure tungsten will melt at 3723 K is The sample will mel because T>

Tungsten

Tungsten is a very hard and brittle material. It properties include a very high melting point, a low vapor pressure and the highest hardness and strength of all metals. Tungsten has good corrosion resistance against most acids and alkalis.

Learn more about tungsten:

https://brainly.com/question/11014899

Other Questions
What Are the (2) most important climatic factors for the Indian people? Are the following figures similar? (1 point)Yes; the corresponding angles are congruentNo; the corresponding angles are not congruentyes; the corresponding sides are proportional no; the corresponding sides are not proportional Which expression represents 10 in rational exponent form?A. 10B. (3)C. 101/2D. 102/1E. 102 A merry-go-round on a playground consists of a horizontal solid disk with a weight of 810 N and a radius of 1.56 m. A child applies a force 49.0 N tangentially to the edge of the disk to start it from rest. What is the kinetic energy of the merry-go-round disk (in J) after 2.95 s Write a short story with hyperbole What is the area of this triangle? Describe the rate of change of f(x)=lnx. Your answer should explain how the slope changes when x is small and when x is large. Is -415 rational or irrational If /61 is the longest side length in the triangle, find the value of x that makes the triangle above a right trianganswer in simplest radical form.A. 5B. 6C. 2V15D. 6V10 Enter the word you received when you completed the Unit 3 Review activity. If theta=3pi/4Sin theta=?Cos theta=? The sum of 2 times a number and 7 is equal to 6 Two of the most fundamental functions for dealing with interprocess communication are read() and write(). Consider the following otherwise valid C program:int r, pipeFDs[2];char message[512];pid_t spawnpid;pipe(pipeFDs);spawnpid = fork();switch (spawnpid){case 0:close(pipeFDs[0]); // close the input file descriptorwrite(pipeFDs[1], "hi process, this is the STUFF!!", 21);break;default:close(pipeFDs[1]); // close output file descriptorr = read(pipeFDs[0], message, sizeof(message));printf("Message received from other: %s\n", message);break;}Select each of the following answers that is correct. CAN BE MULTIPLE CHOICES...(1) The read() call may block until data becomes available(2) When the read() call returns, this one call will return all of the data that was sent through the pipe, which is different behavior than if this was a socket(3) If the read() call blocks, the process will be suspended until data arrives(4) The write() call will return before all of the data has been written, if the corresponding read() call blocks mid-transfer(5) Pipes can fill, which will cause the write() call to block until the read() call is able to read data from the pipe Vanishing Games Corporation (VGC) operates a massively multiplayer online game, charging players a monthly subscription of $12. At the start of January 2015, VGCs income statement accounts had zero balances and its balance sheet account balances were as follows:Cash $ 1,590,000 Accounts Receivable 245,000 Supplies 17,800 Equipment 922,000 Land 1,250,000 Building 435,000 Accounts Payable 137,000 Unearned Revenue 140,000 Notes Payable (due 2018) 81,000 Common Stock 2,800,000 Retained Earnings 1,301,800 In addition to the above accounts, VGCs chart of accounts includes the following: Service Revenue, Salaries and Wages Expense, Advertising Expense, and Utilities Expense.1. Analyze the effect of the January transactions (shown below) on the accounting equation, and indicate the account, amount, and direction of the effect (+ for increase and for decrease) of each transaction.(Enter any decreases to account balances with a minus sign.)a. Received $65,250 cash from customers for subscriptions that had already been earned in 2014.b. Received $215,000 cash from Electronic Arts, Inc. for service revenue earned in January.c. Purchased 10 new computer servers for $34,600; paid $14,400 cash and signed a three-year note for the remainder owed.d. Paid $12,600 for an Internet advertisement run on Yahoo! in January.e. Sold 19,200 monthly subscriptions at $12 each for services provided during January. Half was collected in cash and half was sold on account.f. Received an electric and gas utility bill for $5,250 for January utility services. The bill will be paid in February.g. Paid $420,000 in wages to employees for work done in January.h. Purchased $3,300 of supplies on account.Paid $3,300 cash to the supplier in (h).Prepare journal entries for the January transactions listed in part 1, using the letter of each transaction as a reference. (If no entry is required for a transaction/event, select "No Journal Entry Required" in the first account field.)Create T-accounts, enter the beginning balances shown above, post the journal entries to the T-accounts, and show the unadjusted ending balances in the T-accounts.Prepare an unadjusted trial balance as of January 31, 2015.Prepare an Income Statement for the month ended January 31, 2015, using unadjusted balances from part 4Calculate net profit margin, expressed as a percent If you have read chapter 30 of "to kill a mockingbird" what is one word to describe the chapter? Please help theres a picture to explain more 11070X=? how did the scientific revolution change the way people viewed nature Which list shows the levels of organization of an organism in hierarchical order from left to right, from the least complex to the most complex? Solve.-6x - 4y = -32-2x + 7y = 6 A. (5, 3) B. (5, 2) C. (4, 3) D. (4, 2) The term cyberwar specifically refers to conflicts between nations and their militaries. This is the main distinction between cyberwar and other types of information system attacks that are reported in the news media:__________.