4(x – 2 + y)
What the answer

Due to the symmetry of the paraboloid about the z-axis, you can treat this is a surface of revolution. Consider the curve [tex]y=x^2[/tex], with [tex]1\le x\le2[/tex], and revolve it about the y-axis. The area of the resulting surface is then

[tex]\displaystyle2\pi\int_1^2x\sqrt{1+(y')^2}\,\mathrm dx=2\pi\int_1^2x\sqrt{1+4x^2}\,\mathrm dx=\frac{(17^{3/2}-5^{3/2})\pi}6[/tex]

But perhaps you'd like the surface integral treatment. Parameterize the surface by

[tex]\vec s(u,v)=u\cos v\,\vec\imath+u\sin v\,\vec\jmath+u^2\,\vec k[/tex]

with [tex]1\le u\le2[/tex] and [tex]0\le v\le2\pi[/tex], where the third component follows from

[tex]z=x^2+y^2=(u\cos v)^2+(u\sin v)^2=u^2[/tex]

Take the normal vector to the surface to be

[tex]\dfrac{\partial\vec s}{\partial u}\times\dfrac{\partial\vec s}{\partial u}=-2u^2\cos v\,\vec\imath-2u^2\sin v\,\vec\jmath+u\,\vec k[/tex]

The precise order of the partial derivatives doesn't matter, because we're ultimately interested in the magnitude of the cross product:

[tex]\left\|\dfrac{\partial\vec s}{\partial u}\times\dfrac{\partial\vec s}{\partial v}\right\|=u\sqrt{1+4u^2}[/tex]

Then the area of the surface is

[tex]\displaystyle\int_0^{2\pi}\int_1^2\left\|\dfrac{\partial\vec s}{\partial u}\times\dfrac{\partial\vec s}{\partial v}\right\|\,\mathrm du\,\mathrm dv=\int_0^{2\pi}\int_1^2u\sqrt{1+4u^2}\,\mathrm du\,\mathrm dv[/tex]

which reduces to the integral used in the surface-of-revolution setup.

Answer:

  IV

Step-by-step explanation:

Cosine is positive in quadrants I and IV.

Cosecant (also sine) is negative in quadrants III and IV.

The quadrant where cos > 0 and csc < 0 is quadrant IV.

Answer:

Step-by-step explanation:

Answer:

S = ⅙ π (65^³/₂ − 5^³/₂)

Step-by-step explanation:

z = x² + y², 1 < z < 4

Surface area is:

S = ∫∫√(1 + (fₓ)² + (fᵧ)²) dA

where fₓ and fᵧ are the partial derivatives of f(x,y) with respect to x and y, respectively.

fₓ = 2x, fᵧ = 2y

S = ∫∫√(1 + (2x)² + (2y)²) dA

S = ∫∫√(1 + 4x² + 4y²) dA

For ease, convert to polar coordinates.

S = ∫∫√(1 + 4r²) dA

S = ∫∫√(1 + 4r²) r dr dθ

At z = 1, r = 1.  At z = 4, r = 4.

So 1 < r < 4, and 0 < θ < 2π.  These are the limits of the integral.

S = ∫₀²ᵖⁱ∫₁⁴√(1 + 4r²) r dr dθ

To integrate, use u-substitution.

u = 1 + 4r²

du = 8r dr

⅛ du = r dr

When r = 1, u = 5.  When r = 4, u = 65.

S = ∫₀²ᵖⁱ∫₅⁶⁵√u (⅛ du) dθ

S = ∫₀²ᵖⁱ (⅛ ∫₅⁶⁵√u du) dθ

S = ∫₀²ᵖⁱ (¹/₁₂ u^³/₂ |₅⁶⁵) dθ

S = ∫₀²ᵖⁱ (¹/₁₂ (65^³/₂ − 5^³/₂)) dθ

S = (¹/₁₂ (65^³/₂ − 5^³/₂)) θ |₀²ᵖⁱ

S = (¹/₁₂ (65^³/₂ − 5^³/₂)) (2π)

S = ⅙ π (65^³/₂ − 5^³/₂)

Answer:

12p

Step-by-step explanation:

the perfect square is form

(p - 6)² = p² - 12p + 36

Answer:

12p

Step-by-step explanation:

p² - ? + 36 = p² - ? + (-6)² = p² -2*6*p + (-6)² = p² - 12p + 36 = (p-6)²

Answer:

e. the gender of the students in a class

Step-by-step explanation:

Quantitative data is measured is numbers. For example 1, 2, 3.5,...

Qualitative data are labels, that is, tall, short, male, female, Brazilian, Colombian,...

In this question:

The only data that is not measured in numbers is the gender of the studens in class, which can be male or female, they do not assume any numeric value. So the answer is e.

The quantitive data example does not include option e. the gender of the students in a class.

learn more about the data here: https://brainly.com/question/20296761

Answer:

The inverse function is [tex]f^{-1}(x) = \frac{x-1}{2}[/tex]

Step-by-step explanation:

We have the following function:

y = 2x + 1

Finding the inverse:

Exchange y and x, and then isolate y again. So

y = 2x + 1

Exchange y and x

x = 2y + 1

2y = x - 1

[tex]y = \frac{x-1}{2}[/tex]

So

The inverse function is [tex]f^{-1}(x) = \frac{x-1}{2}[/tex]

Step-by-step explanation:

a.It is a controlled experiment because it is clearly seen that an established hypothesis or study is being verified through an experiment, now in this case the hypothesis is tested through an experiment where excessive stress is placed on the Participants during their math exam to effectively verify that people in urban or city areas live with more stress than people in rural areas.

2..As now that the previously established hypothesis has been verified, it is concluded that people who live in the city live with more anxiety and stress than people who live in rural areas.

Answer:

0

Step-by-step explanation:

1x=x

-x/1=-x

x-x=0

Answer:

Brainleist !

Step-by-step explanation:

x - x /1

x - x = nothing or 0

Answer:

[tex] \bar X = \frac{\sum_{i=1}^{42} X_i}{n}[/tex]

And for this case the sample mean is

[tex]\bar X = 127.1[/tex]

And this value is calculated from a sample so then can't represent a population parameter. Then the value 127.1 represent a statistic called the sample mean unbiased for the true population mean since [tex] E(\bar X) =\mu[/tex], and the best option would be:

D) The given value is a statistic for the year because the data collected represent a sample.

Step-by-step explanation:

For this case we know that a homeowner take a random sample of 42 voltage values ina year and he calculate the sample mean with this formula:

[tex] \bar X = \frac{\sum_{i=1}^{42} X_i}{n}[/tex]

And for this case the sample mean is

[tex]\bar X = 127.1[/tex]

And this value is calculated from a sample so then can't represent a population parameter. Then the value 127.1 represent a statistic called the sample mean unbiased for the true population mean since [tex] E(\bar X) =\mu[/tex], and the best option would be:

D) The given value is a statistic for the year because the data collected represent a sample.

Answer:

[tex]9.5[/tex]

Step-by-step explanation:

[tex]\sqrt{64}+\frac{6}{-2\left(-2\right)}[/tex]

[tex]\sqrt{64}+\frac{6}{2 \times 2}[/tex]

[tex]8+\frac{6}{4}[/tex]

[tex]\frac{19}{2}[/tex]

[tex]=9.5[/tex]

Answer:

Hello!

I hope that this is the answer you are looking for

=8.09320

That is the rounded answer.

I hope that helped you!

Step-by-step explanation:

Answer:

[tex]\fbox{\begin{minipage}{8em}Not a solution\end{minipage}}[/tex]

Step-by-step explanation:

Step 1: Consider the assumption:

Generally, [tex](6, 7)[/tex]) is supposed to be the pair of 2 components, in which, the first component is x-component (domain), the second component is y-component (range).

Hence, [tex]x = 6, y = 7[/tex]

Step 2: Substitute [tex]x[/tex] and [tex]y[/tex] into the inequality

       [tex]y > 2x - 5[/tex]

<=>  [tex]7 > 2*6 - 5[/tex]

Step 3: Simplify

<=>  [tex]7> 12 - 5[/tex]

<=>  [tex]7 > 7[/tex]

Step 4: Evaluate

Invalid

Reason: [tex]7 = 7[/tex]

Step 5: Conclude

[tex](6, 7)[/tex] is not a solution to the inequality [tex]y > 2x - 5[/tex]

Hope this helps!

:)

Answer:

The null hypothesis: there is no difference between the mean IQ level of people who were reared by their biological parents and those who were reared by someone else.

Step-by-step explanation:The null hypothesis can be a general statement mostly in statistics that proposes no difference or no relationship between 2 phenomena etc

Researchers always carry out a study to test against the null hypothesis ie the opposite of the null hypothesis showing that there is a difference. In this study, the researchers aim is to establish that there is a difference between the mean IQ level of people who were reared by their biological parents and those who were reared by someone else. This goes against the null which states that

there is no difference between the mean IQ level of people who were reared by their biological parents and those who were reared by someone else.

Answer:use mathematic pathway to calualte

Step-by-step explanation:

Answer:

1

Step-by-step explanation:

Answer:

  209 : 40  or  5.225 : 1

Step-by-step explanation:

Your calculator can tell you the ratio 8.36/1.60 is 5.225. Writing that decimal as a fraction, you can factor out 25 to get ...

  8.36 : 1.6 = 5.225 : 1 = 5225 : 1000 = (25)(209) : (25)(40) = 209 : 40

Answer:

2

Step-by-step explanation:

as you can see the slope of the line y = -1/2x + 5 is -1/2

the slope m of any line perpendicular to it should verify : -1/2×m = -1

-1/2×m = -1

→ multiply both sides by -2

m = 2

Answer:

Step-by-step explanation:

The question is incomplete. The complete question is:

Eagle Outfitters is a chain of stores specializing in outdoor apparel and camping gear. It is considering a promotion that involves mailing discount coupons to all its credit card customers. This promotion will be considered a success if more than 10% of those receiving the coupons use them. Before going national with the promotion, coupons were sent to a sample of 100 credit card customers. Out of the 100 customers, 13 customers said that they used the discount coupons to make a purchase at a Eagle Outfitters store. Use a 0.05 level of significance. (a) Develop the null and alternative hypotheses that can be used to test whether the population proportion of those who will use the coupons is sufficient to go national. (b) Compute the sample proportion. (c) Compute the test statistic. (d) Compute the critical value. (e) Based on the critical value, do we reject H0 or do we not reject H0? (f) Based on the result of the hypothesis test, should Eagle Outfitter go national with the promotion?

Solution:

a) We would set up the hypothesis test.

For the null hypothesis,

H0: p ≥ 0.1

For the alternative hypothesis,

Ha: p < 0.1

This is a left tailed test

Considering the population proportion, probability of success, p = 0.1

q = probability of failure = 1 - p

q = 1 - 0.1 = 0.9

b) Considering the sample,

Sample proportion, P = x/n

Where

x = number of success = 13

n = number of samples = 100

p = 13/100 = 0.13

c) We would determine the test statistic which is the z score

z = (P - p)/√pq/n

z = (0.13 - 0.1)/√(0.1 × 0.9)/100 = 1

The calculated test statistic is 1 for the right tail and - 1 for the left tail.

d) Since α = 0.05, the critical value is determined from the normal distribution table.

For the left, α/2 = 0.51/2 = 0.025

The z score for an area to the left of 0.025 is - 1.96

For the right, α/2 = 1 - 0.025 = 0.975

The z score for an area to the right of 0.975 is 1.96

e) In order to reject the null hypothesis, the test statistic must be smaller than - 1.96 or greater than 1.96

Since - 1 > - 1.96 and 1 < 1.96, we would fail to reject the null hypothesis.

Therefore, based on the result of the hypothesis test, the Eagle Outfitter should go national with the promotion

Answer:

a) The 95% confidence interval for the mean amount of time Americans age 15 or older spend eating and drinking each day is (1.49, 1.57).

d) The nutritionist is 95% confident that the mean amount of time spent eating or drinking per day for any individual is between 1.49 and 1.57 hours.

(c and b can not be concluded from the confidence interval)

Step-by-step explanation:

We have to calculate a 95% confidence interval for the mean.

The population standard deviation is not known, so we have to estimate it from the sample standard deviation and use a t-students distribution to calculate the critical value.

The sample mean is M=1.53.

The sample size is N=1082.

When σ is not known, s divided by the square root of N is used as an estimate of σM:

[tex]s_M=\dfrac{s}{\sqrt{N}}=\dfrac{0.71}{\sqrt{1082}}=\dfrac{0.71}{32.89}=0.022[/tex]

The degrees of freedom for this sample size are:

[tex]df=n-1=1082-1=1081[/tex]

The t-value for a 95% confidence interval and 1081 degrees of freedom is t=1.962.

The margin of error (MOE) can be calculated as:

[tex]MOE=t\cdot s_M=1.962 \cdot 0.022=0.042[/tex]

Then, the lower and upper bounds of the confidence interval are:

[tex]LL=M-t \cdot s_M = 1.53-0.042=1.49\\\\UL=M+t \cdot s_M = 1.53+0.042=1.57[/tex][tex]LL=M-t \cdot s_M = 1.53-0.042=1.49\\\\UL=M+t \cdot s_M = 1.53+0.042=1.57[/tex]

The 95% confidence interval for the mean is (1.49, 1.57).

Answer: C) 24

Step-by-step explanation:

first we take down the information given to us

sports shop sells rackets in

4 different weights

2 types of strings

3 grip sizes

Now to get the number of different rackets they could sell, you simply take the  multiplication of the number of racket gripe sizes, the types of strings and different weights they sell

so

4 * 2 * 3 = 24

therefore the sport shop could sell up to 24 different rackets .

Answer:

24

Step-by-step explanation: got it right on my test

Answer:

C

Step-by-step explanation:

Hope this helps

Answer:

C

Step-by-step explanation:

Wednesday hope this helps!

Answer:

61%

Step-by-step explanation:

16/26 x 100 = 61.538461

You have to round it up if the question tells you to round it up.

hope it helps! :)

Answer:

62%

Step-by-step explanation:

42 x 62% = 26.04

I am sorry if you get this wrong. I really hope this helps.

Answer: see below

Step-by-step explanation:

To find a coterminal angle, add or subtract 360° to the given angle as many times as needed to get a positive or negative angle.

I should mention that there are an infinite number of answers!

4) 400°

I can subtract 360° to get a positive angle of 40°

I can subtract another 360° to get a negative angle of -320°

5) -360°

I can subtract 360° to get a negative angle of -720°

I can add 360° twice to get a positive angle of 360°

6) -1010°

I can add 360° to get a negative angle of -650°

I can add 360° another 3 times to get a positive angle of 720°

7) 567°

I can subtract 360° to get a positive angle of 207°

I can subtract another 360° to get a negative angle of -153°

8) -164°

I can subtract 360° to get a negative angle of -524°

I can add 360° to get a positive angle of 194°

9) 358°

I can subtract 360° to get a negative angle of -2°

I can add 360° to get a positive angle of 718°

Answer:

B.

Step-by-step explanation:

In the attached file

Answer:

339 bricks.

Step-by-step explanation:

We have the weight of each brick and what the truck can support. Therefore what we must do is pass all to the same unit of measurement to calculate the quantity of bricks.

In this case we will pass everything to pounds.

We have that a 1 pound is 16 ounces, therefore 14 would be:

14 ounces * 1 pound / 16 ounces = 0.875 pounds

In addition we have that 1 ton is 2204.62 pounds, therefore 3/4 would be:

3/4 ton * 2204.62 pounds / 1 ton = 1653.467 pounds

Therefore, in total the brick weighs 4,875 pounds (4 + 0.875) and the truck can support 1653,467 pounds, the number of bricks would be:

1653.467 / 4.875 = 339.17

In other words, it can support about 339 bricks.

Answer:

B.) a line labeled g(x) that passes through points 0, negative 3 and 4, 5

Step-by-step explanation:

I graphed both equation on the graph below to find the description of the graph of g(x).

Answer:

b for brakes?

Step-by-step explanation:

Answer:

  c)  x = 6, y = 9

Step-by-step explanation:

The figure is a parallelogram. The diagonals of a parallelogram bisect each other, so each part of a given diagonal is equal to the other part.

  3x = 2y

  2x = y+3

__

Solving the second equation for y, we have ...

  y = 2x -3

Substituting into the first equation gives ...

  3x = 2(2x -3)

  3x = 4x -6 . . . . simplify

  6 = x . . . . . . . . .add 6 -3x

  y = 2(6) -3 = 9 . . . . use the above expression for y

The values of x and y are (x, y) = (6, 9).

Answer:

24 ways

Step-by-step explanation:

1) In Combinatorics when we arrange a number and the order matter, we call it arrange the possibilities. For this exercise let's not use formulas but reasoning.

2) For this case we need a two figure number. Since we have seven numbers.

Since there is no repetition, all the possibilities are:

[tex]7*6=42[/tex]

3) But there is a restriction it's forbidden adjacent even and odd numbers: These numbers we don't want them:

13 15 17

24 26

31 35 37

42 46

51 53 57

62 66

71 73 75

18 non desirable results

The total arrangements minus the not possible combinations, will match the possible results:

[tex]42-18=24[/tex]

3) Just for checking, we have here the allowed combinations:

12 14 16

21 23 25 27

32 34 36

41 43 45 47

52 54 56

61 63 65 67

72 74 76  

A total of 24 possible ways.

Answer:

-9 and -10

Step-by-step explanation:

x + x+1=-19

2x+1=-19

2x=-19-1

2x=-20

x=-10

x+1

-10+1=-9

Answer:

[tex]-9[/tex]

[tex]-10[/tex]

Step-by-step explanation:

[tex]x+x+1=-19[/tex]

[tex]2x+1=-19[/tex]

[tex]2x=-19-1[/tex]

[tex]2x=-20[/tex]

[tex]x=-20 \div 2[/tex]

[tex]x=-10[/tex]

[tex]x+x+1=-19[/tex]

[tex]x+1=-19-x[/tex]

[tex]-10+1=-19-(-10)[/tex]

[tex]-9=-19+10[/tex]

[tex]-9=-9[/tex]

Answer:

Lower class Limit: 20,25,30,35,40,45,50

Upper class limit: 24,29,34,39,44,49,54

Class width: 4

Class Midpoints : 22,27,32,37,42,47,52

Class Boundries : 19.5,24.5,29.5,34,5,39.5,44.5,49.5,54.5

Total Individuals: 93

Step-by-step explanation:

Lower class limit is the lowest value of a class e.g in the first class, the lowest value is 20. Similarly find lower class limit of othere classes.

Upper class limit is the highest value of a class e.g in the first class, the highest value is 24. Similarly find upper class limit of othere classes.

Class width is the difference between highest and lowest value of a class e.g 24-20=4

Class Midpoints can be found by adding lowest and highest value of a class and dividing it by 2 e.g (20+24)/2 = 22

Class boundaries are the halfway point which seperates the classes e.g for first classes, clasee boundry is (19.5,24.5)

Total individuals are founf by adding all the frequencies.