Answer:
c and d
Explanation:
obviously kksxsxksxkskxkskxksxksxsxsxsxsxsxsxs
What are inert gases with example
Answer:
Inert gases:An inert gas is a gas that is unreactive in its environment. The noble gases (helium, neon, argon, krypton, xenon, and radon) are considered inert in most applications. Argon is the cheapest noble gas and thus the most frequently used. In applications insensitive to chemical reactions with nitrogen, even nitrogen gas (N2) may be used as inert gas.plz help! ill give brainlyest to whoever gets this correct!
Two carts move directly toward one another on an air track. Cart 1 has a mass of 0.35 kg and a speed of 1.2 m>s. Cart 2 has a mass of 0.61 kg and a speed of 0.85 m>s. What is the total momentum of the system, assuming that cart 1 moves in the positive direction?
Write any three facts in the support of molecular theory
Answer:
Every gas is made up of very small particles called molecules. Molecules of a gas are separated from each other by large distances so that volume is negligible as compared to total volume of gas. The force of gravitation on the molecules is also negligible.
Hope that helps. x
:
please help quick i’ll mark you brainly
The equation below shows how to calculate work done by an applied force. W equals the work done in joules (J), F equals the applied force in newtons (N), and d equals the distance in meters (m) over which the force is applied.
W = F × d
This equation can be arranged to calculate the applied force instead:
F = W ÷ d
A scientist was performing some experiments to test the designs of some simple machines. One of her experiments involved a pulley. During the experiment, a total of 2,000 J of work was done to lift a crate 5 m straight up off the floor.
Ignoring the effects of friction, determine the applied force needed to lift the crate.
A.
2,005 N
B.
400 N
C.
10,000 N
D.
1,995 N
Answer:
The solutions to this exercise is B. 400N
Describe the way that distance is changing in relation to tiMe
Answer:
DistaNcE chanGes iN relAtiOn tO TiMe Bc ThE fuRthEr yOu Go ThE mOrE TiMe goeS bY
The mass of a water skier is 54 kg. Calculate his/her weight if the gravitational field strength is 10 N/kg.
Answer:
weight=mass×gravity
the mass in this question is 54kg and the gravity is 10
therefore:
w=54×10
=540N
I hope this helps
12. A lathe mounted on wooden skids is to be slid down a pair of planks placed against the back of a truck.
(a) If the coefficient of friction is 0.28, what angle should the planks make with the ground in order for the lathe to slide down at constant velocity?
(b) When the planks are at this angle, will the lathe start to slide down of its own accord?
(a) The angle the planks make with the ground in order for the lathe to slide down at constant velocity is 90⁰.
(b) Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
The given parameters:
coefficient of friction, μ = 0.28The net force on the wooden skids is calculated as follows;
[tex]\Sigma F = 0\\\\F - \mu mg cos\theta = 0\\\\ma - \mu mg cos\theta = 0\\\\ma = \mu mg cos \theta \\\\a = \mu g cos\theta\\\\at \ constant \ velocity , \ a = 0\\\\0 = \mu g cos \theta\\\\cos \theta = 0\\\\\theta = 90 ^0[/tex]
Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
Learn more about coefficient of friction here: https://brainly.com/question/14121363
???????????????????????????????????
free tingsssssssssss
Explanation:
yayyy thx u soo muchihuhuhu
Answer:
thx
Explanation:
During chemical reactions, bonds between atoms break and form. What does this mean in terms of subatomic particles? (1 point)
O Electrical fields of charged particles interact, bonding those with the same charge.
Electrical fields of neutral particles interact, bonding those with opposite charges.
O Electrical fields of neutral particles interact, bonding those with the same charge.
o Electrical fields of charged particles interact, bonding those with opposite charges
During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
What is the chemical bonds?During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
Since we know that every element have electrons in their atoms and every atom have vacant shells.
So during chemical reactions the elements fulfill their vacant shells and form bonds between each other it can be ionic or it can be covalent bond.
But when atoms breaks the bond their will be the positively or negatively charged electrons left in the atoms.
Hence During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
To know more about chemical bonds follow
https://brainly.com/question/819068
The magnitude of acceleration due to gravity is
Select one:
a. 9.8 m/s
b. 8.9 m/s2
c. 4.6 m/s
Answer:
The magnitude of a gravity is always 9.8 which is later approximated to 10m/s.
Answer:
a. 9.8
Explanation:
The magnitude of acceleration due to gravity is 9.8
Alistar places a 6.4 kg block on an incline plane that is 23 degrees above the horizontal. The block starts from rest, and in 2.2 seconds, travels 1.4 meters. What is the force of friction on the block?
fh= 6.4×23
fh=147.2
fv=2.2×1.4
fv=3.08
f=147.2+3.08
f=150.28
The force of friction on the block is 20.798 N.
What is acceleration?Acceleration is the rate at which speed and direction of velocity vary over time. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting.
Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).
Given parameters:
Mass of the block: m = 6.4 kg.
Angle of inclination = 23°
Hence, Magnitude force acting along the motion = mg sin23°
= 6.4 × 9.8 × sin23° N
= 24.51 N.
The block travels 1.4 meters in 2.2 seconds. Acceleration = (2×1.4)/2.2² m/s²
= 0.58 m/s²
Hence, the force of friction on the block is = F - ma
= 24.51 N - 6.4×0.58 N
= 20.798 N
Learn more about acceleration here:
brainly.com/question/12550364
#SPJ2
In the Bohr model of the hydrogen atom, the speed of the electron is approximately 2.2 106 m/s.
Find the central force acting on the electron as it revolves in a circular orbit of radius 4.63 x 10-11 m.
Answer in units of N.
The central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].
The given parameters;
speed of electron, v = 2.2 x 10⁶ m/sradius of the circle, r = 4.63 x 10⁻¹¹ mThe central force acting on the electron as it revolves in a circular orbit is calculated as follows;
[tex]F = \frac{M_e v^2}{r} \\\\[/tex]
where;
[tex]M_e[/tex] is mass of electron = 9.11 x 10⁻³¹ kg
[tex]F = \frac{(9.11 \times 10^{-31}) \times(2.2\times 10^6)^2 }{4.63 \times 10^{-11}} \\\\F = 9.52 \times 10^{-8} \ N[/tex]
Thus, the central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].
Learn more about centripetal force here:https://brainly.com/question/20905151
Which turn (left or right) requires the truck to slow down more in order to make the turn safely? Explain your answer using appropriate relationships.
How much energy is needed just to boil 5kg of water at 100◦ C?
How long does it take a car traveling at 45km/h to travel 100.0 m?
Answer:
8 seconds
Explanation:
Since the carspeed is in km/h, we need equal units, so we will make 100.0m 0.1000km.
Then we need to find how long it takes the car to travel 0.1km
We can use the formula distance=speed * time and get
0.1=45 * time
Therefore we get .002222... hours
Multiplying this by 3600 (to get seconds, 60x60), we get 8 seconds
Answer:
8m/s
Explanation:
speed = 45km/h
Distance = 100m
we have to find time = ?
Formula for speed is = Distance/ Time
Here Distance is given in 'm' so we need to convert speed value in 'm'
So to convert km/h in m formula is divide 45km/h by 3.6 then the km/h value gets converted in m so now the value is 12.5 m/s
So now,
speed = Distance/Time
we have to find Time
Then,
Time = Distance/ Speed
= 100/12.5
= 8m/s
3. Which is not an example of energy
(5 Points)
light
thermal
heat
chemical
Answer:
Heat, Chemical
Answer:
heat is not an energy is a process.
Explanation:
Explain how energy changes in the spring toy below when it goes downstairs.
Given what we know, we can confirm that the spring toy uses the transfer of potential gravitational energy into kinetic energy of motion in order to fall down the stairs.
How does the toy do this?The toy stores potential energy. It does this using gravity. Once it begins to fall, it uses the momentum from each fall to continue to do so. With each fall, its stored potential energy is transferred to kinetic energy.Therefore, we can confirm that the spring toy uses its position at the top of each stair as a source of potential energy, which using the momentum from the last fall, it transfers into the kinetic energy of motion as it falls, all through the help of gravity.
To learn more about energy visit:
https://brainly.com/question/999862?referrer=searchResults
A baseball player at practice is pushing a tackling dummy across the field. He initially has to push the 130 kg dummy with 600 Newton’s of force to get it to start moving and maintain a force of 475 to keep it moving at a steady state. What are the coefficient of friction static and kinetic with the dummy on the ground
.
Answer:
Static= 600/(130*9.8)=0.47
Kinetic=475/(130*9.8)=0.37
A battery is connected in series with an ammeter and a variable resistor R.
When R= 6.0 ohms, the current in the ammeter is 1.0 A. When R= 3.0 ohms, the current is 1.5 A.
Calculate the internal resistance of the battery.
A. 6.0 ohms
B. 1.5 ohms
C. 4.5 ohms
D. 3.0 ohms
A vertical spring stretches 9.6 cm when a 1.3 kg block is hung from its end. (a) Calculate the spring constant. This block is then displaced an additional 5.0 cm downward and released from rest. Find the (b) period, (c) freque
Answer:
F = - K x
a) K = 1.3 kg * 9.8 m/s^2 / .096 m = 133 kg/sec^2
b) ω = (K/m)^1/2 angular frequency of SHM
ω = (133 / 1.3)^1/2 = 10.1 / sec
f = 2 π ω = 6.28 * 10.1 / sec = 63.5 / sec
P = 1/f = .0157 sec
A train starts at rest and ends up with 1500 J of kinetic energy. How much work was done on the train?
Answer:
1500 J
Explanation:
Apparently, we're to assume that no energy is lost to friction or other effects. Then all of the energy the train has is due to work being done on it.
1500 J of work was done on the train
What is chemical reaction? Give an example of each of exothermic and endothermic reaction
Answer:
A chemical reaction is a process that occurs when two or more molecules interact to form a new product(s).
Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Example:
A popular example of an endothermic chemical reaction is photosynthesis. During this process, plants absorb energy from the Sun and convert it into carbon dioxide and water into glucose and oxygen.
An exothermic reaction releases energy into the surrounding of the system.
Example:
the chemical reaction between sodium and chlorine results in the formation of sodium chloride (also known as common salt).
an object moves 15.0 m north and then 11.0 m south. find both the distance it has traveled and the magnitude of its displacement.
The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as
Answer: The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as "standing"
3) A 14 kg object is sitting at the top of a hill that is 100 m high. What is the potential energy of the
object?
Answer:
13,720 joules
Explanation:
Epotential = mgh
mass x gravity x height
Ep= 14 x 9.8 x 100
Ep=13,720 joules
Help needed for science homework
Solve the science problem
Answer:
1.hydrogen
2.helium
3. lithium
4.beryllium
5.boron
6.carbon
7.nitrogen
8.oxygen
9.fluorine
10.neon
What size resistor would produce a 3 amp current flow with a 12 volt battery?
Resistance = volts / amps
Resistance = 12 volts / 3 amps
Resistance = 4 Ohms
Answer: 4 Ohms
explain maximum and minimum thermometer working(answer only for points will be reported)
Explanation:
Six’s Maximum and Minimum thermometer is a U shaped parallel tube made up of glass. One side registers the maximum temperature and the other side records the minimum temperature.The bend at the bottom of the thermometer contains mercury which moves up or down based on the expansion and contraction of alcohol.When the temperature rises, the alcohol expands and pushes the mercury up the maximum column. This also pushes the mercury down in the minimum column.Similarly, when the temperature falls, the alcohol contracts and pulls the mercury up in the minimum column resulting in a fall of mercury in the maximum column.The steel indexes are located on the surface of mercury. They move along with the flow of mercury up and down.When the temperature reaches its maximum and minimum limits, the metal indexes remain at that place. This helps in recording the maximum and minimum temperatures of the day.