6528 8891
A 0.25 kg ball with a velocity of 63 m/s strikes a 1.25kg ball at rest. After the collision, th
balls bounce off each other, and the 1.25 kg ball is moving with a velocity of 9m/s. Whc
is the velocity (in m/s) of the 0.25 kg ball?
Round your answer to the nearest whole number but leave units out of your answer.

The orbital period of this asteroid is approximately 353.55 Earth years.

Kepler's third law states that the square of the orbital period (in years) of a planet or asteroid is proportional to the cube of its semi-major axis (in AU).

Therefore, we can use the following formula to calculate the orbital period:

(T / 1 year)^2 = (a / 1 AU)^3

where;

Plugging in the values for the asteroid at 50 AU, we get:

(T / 1 year)^2 = (50 / 1 AU)^3

(T / 1 year)^2 = 125000

T / 1 year = √(125000)

T = 353.55 Earth years (rounded to two decimal places)

Learn more about period here: https://brainly.com/question/29813582

#SPJ1

Answer: Vitamins

Explanation:

The force experienced by an object is 144.76 N.

O\ption B is correct.

A force is described as an influence that can change the motion of an object or that can cause an object with mass to change its velocity

The force can be calculated using the equation of force = change in momentum / time.

So, force = 1.52 kg·m/s / 0.0105 s = 145 N

Therefore, the answer is 144.76 N.

Some types of force available includes the following:

Learn more about force at: https://brainly.com/question/12785175

#SPJ1

The potential energy of the box is 4180 kip-ft.

Potential energy is described as the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

The potential energy of an object can be calculated using the formula:

PE = mgh

In the scenario,

the mass of the box is m = 10000 pounds and

the height above the ground is h = 25 miles = 25 * 5280 feet = 132000 feet.

The acceleration due to gravity is g = 32.2 ft/s^2.

Substituting these values into the formula, wehave:

PE = mgh = 10000 * 32.2 * 132000 = 4.18 x 10^8 ft-lb

Converting this to kip-ft,

PE = 4.18 x 10^8 ft-lb / 1000 = 4180 kip-ft

Learn more about  potential energy at: https://brainly.com/question/1242059

#SPJ1

Answer:ddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd

Explanation:

The maximum force that can be applied on the upper cube is 26.29N.

The maximum force that can be applied on the upper cube so that the two cubes move together is given by the equation:

F_max = μ(m1 + m2)g

where,

μ = the coefficient of friction

m1 and m2 = the masses of the top and bottom cube

g = the acceleration due to gravity.

Substituting in the values, we get:

F_max = 0.5(2.2kg + 4.8kg)(9.81m/s²)

F_max = 26.29N

Therefore, the maximum force that can be applied on the upper cube is 26.29N.

Learn more about  maximum force on

https://brainly.com/question/29559091

#SPJ1

The original velocity of the ball was -4.0 m/s, which means it was moving in the opposite direction of the final velocity (4.0 m/s).

How to find the original velocity of the ball?

The original velocity of the ball can be found using the principle of conservation of momentum. The principle of conservation of momentum states that the total momentum of a closed system remains constant if no external forces act upon it. In this case, the closed system is the ball and the pin. Before the collision, the total momentum of the system was zero (since the ball was at rest). After the collision, the momentum of the system is given by the ball's momentum plus the pin's momentum.

The momentum of an object is given by the product of its mass and velocity:

p = m * v

where:

p is the momentum of the object

m is the mass of the object

v is the velocity of the object

First, let's find the total momentum of the system after the collision:

p_total = p_ball + p_pin

p_total = (m_ball * v_ball) + (m_pin * v_pin)

p_total = (7.0 kg * v_ball) + (2.0 kg * 7.0 m/s)

Now, we'll use the principle of conservation of momentum to set the total momentum of the system before the collision equal to the total momentum of the system after the collision:

p_total_before = p_total_after

0 = p_total

0 = (7.0 kg * v_ball) + (2.0 kg * 7.0 m/s)

Solving for v_ball:

v_ball = (-2.0 kg * 7.0 m/s) / 7.0 kg

v_ball = -4.0 m/s

So, the original velocity of the ball was -4.0 m/s, which means it was moving in the opposite direction of the final velocity (4.0 m/s).

To learn more about velocity:

https://brainly.com/question/25749514

#SPJ1

Answer:

F = G * (m1 * m2) / r^2

Explanation:

The relationship between mass and gravitational force is directly proportional. This means that as the mass of an object increases, the magnitude of the gravitational force acting on it also increases. The exact relationship can be described using Newton's law of universal gravitation, which states that the gravitational force between two objects is proportional to the product of their masses and inversely proportional to the square of the distance between them.

This relationship can be expressed mathematically as:

F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

This relationship makes intuitive sense: larger objects have a greater ability to pull other objects towards them, so the gravitational force they exert is stronger. On the other hand, as the distance between two objects increases, the gravitational force between them decreases, because the pull is spread out over a larger area.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

The answer to the question that follows in the space provided is

carbon dioxide + water + sunlight = glucose + oxygen.

Green plants produce their food in the presence of sunlight during photosynthesis. The process is only done by autotrophs.

They use carbon dioxide and water, which are inorganic components from the environment, to create glucose, and oxygen gas is released into the atmosphere.

Carbon dioxide +  water →   Glucose  +  Oxygen

Therefore, the correct option is

To learn more about photosynthesis, refer to the link:

https://brainly.com/question/13523849

#SPJ9

The medium determines the amplitude of the wave vibrations is the correct option (B) .

What is wave ?

Laminar and transverse waves are the two types of waves. Longitudinal waves are similar to those of sound in that they alternate between compressions and rarefactions in a medium, much like transverse waves in that the surface of the medium rises and falls.

What is transverse wave ?

The term "transverse wave" refers to motion in which all wave points oscillate along trajectories that are perpendicular to the wave's forward velocity. Transverse waves include electromagnetic (such as radio and light) and seismic S (secondary) waves. Surface ripples on water are another example.

In a transverse wave, the medium's particles vibrate up and down perpendicular to the wave's direction. In a longitudinal wave, the medium's particles vibrate back and forth parallel to the wave's direction.

Therefore, medium determines the amplitude of the wave vibrations is the correct option (B) .

Learn more about wave from the given link.

https://brainly.com/question/26116832

#SPJ1

As the owner of an appliance store, the following four categories of assets could apply to my business:

Cash: Cash is the most liquid asset and represents the money that the business has on hand or in the bank. As an appliance store owner, cash can be used to pay for business expenses such as rent, utilities, employee wages, and inventory purchases.

Accounts receivable: Accounts receivable represents the money that customers owe to the business for goods or services that have been sold but not yet paid for. In the context of an appliance store, accounts receivable would include sales made on credit, where customers are allowed to take the appliances and pay for them at a later date.

Inventory: Inventory represents the goods that the business has on hand to sell to customers. For an appliance store, inventory would include appliances such as refrigerators, washing machines, dryers, and ovens. The value of the inventory can fluctuate depending on market demand, changes in technology, and other factors.

Prepaid expenses: Prepaid expenses represent the costs that the business has paid in advance for goods or services that will be used in the future. In the context of an appliance store, prepaid expenses may include things like rent payments, insurance premiums, and maintenance contracts. By prepaying for these expenses, the business can ensure that it has access to the resources it needs to operate efficiently.

learn more about assets: https://brainly.com/question/27972503

#SPJ1

Due to years of practice and repetition, Marcus has most likely begun to use unconscious processes when swinging his golf club.

The unconscious is the process that proceeds outside the person's awareness and plays a major role in directing thoughts, feelings, behavior, and mental illness.

When Marcus goes to play golf, he steps up to his ball and swings the club without thinking at all about his technique, so the signs about the unconscious process.

Therefore, Marcus has most likely begun to use unconscious processes when swinging his golf club.

Learn more about the unconscious, here:

https://brainly.com/question/23683815

#SPJ9

Answer:

[tex]\huge\boxed{\sf R = 360\ ohms}[/tex]

Explanation:

Potential Difference = V = 9 V

Current = I = 0.025 A

Resistance = R = ?

V = IR (Ohm's Law)

V = IR

Divide I to both sides

[tex]\displaystyle \frac{V}{I} = R[/tex]

Put the given data

9/0.025 = R

360 ohms = R

OR

[tex]\rule[225]{225}{2}[/tex]

The Velocity is 4270 m/s it is equal to product of frequency and wavelength.

Given: -

Frequency(f) = 700 Hz

Wavelength(λ) = 6.1m

velocity = f x λ

velocity = 700 x 6.1

velocity = 4270 m/s

Wavelength is a fundamental concept in physics, particularly in the study of waves, which includes electromagnetic radiation, light, and sound waves. It is defined as the distance between two successive points of the same phase, such as the crest or trough of a wave. This distance is usually measured in units of meters, and it is inversely proportional to the frequency of the wave.

In electromagnetic radiation, the wavelength is an important property that determines the type of radiation, such as radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Each type of radiation has a unique range of wavelengths that can be measured using instruments like a spectroscope or a radio antenna.

To learn more about Wavelength visit here:

brainly.com/question/7143261

#SPJ4

Answer:

Height difference: approximately [tex]63\; {\rm m}[/tex].

The first ball was dropped from a height of approximately [tex]123\; {\rm m}[/tex].

(Assumptions: both balls were released from rest, air friction is negligible, and that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].)

Explanation:

Under the assumptions, both ball would accelerate at a constant [tex]a = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex].

Let [tex]t[/tex] denote the time since the first ball was released.

Height of the first ball at time [tex]t[/tex] can be modelled with the SUVAT equation [tex]h(t) = (1/2)\, a\, t^{2} + u\, t + h_{0}[/tex], where [tex]u[/tex] is the initial velocity. However, since [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] by assumption, this equation simplifies to [tex]h(t) = (1/2)\, a\, t^{2} + h_{0}[/tex].

Since this ball reached the ground after [tex]t = 5.0\; {\rm s}[/tex], [tex]h(5.0) = 0\; {\rm m}[/tex]. In other words:

[tex]\begin{aligned}\frac{1}{2}\, (-9.81)\, (5.0)^{2} + h_{0} = 0\end{aligned}[/tex].

Simplify and solve for the initial height of this ball, [tex]h_{0}[/tex]:

[tex]\begin{aligned}h_{0} &= -\frac{1}{2}\, (-9.81)\, (5.0)^{2} \\ &\approx 123\; {\rm m}\end{aligned}[/tex].

In other words, the first ball was dropped from a height of approximately [tex]123\; {\rm m}[/tex].

Similarly, the height of the second ball may be modelled as [tex]h(t) = (1/2)\, a\, t^{2} + h_{0}[/tex].

Since this ball reached the ground [tex]t = (5.0 - 1.5)\; {\rm s} = 3.5\; {\rm s}[/tex] after being released, [tex]h(3.5) = 0\; {\rm m}[/tex]. The initial height of this ball would be:

[tex]\begin{aligned}h_{0} &= -\frac{1}{2}\, (-9.81)\, (3.5)^{2} \\ &\approx (-60)\; {\rm m}\end{aligned}[/tex].

Subtract the initial height of the second ball from that of the first ball to find the difference in initial height:

[tex](123 - 60) \; {\rm m} \approx 63\; {\rm m}[/tex].

The angular velocity in rad/s are 4.7124 rad/s and the period of the motion is 1.333s.

a) Find angular velocity

Given

45 rpm that is rotations per min  converting it in to rad/s

we know that the angular displacement for one rotation is  2pi rad

45 rpm = 45*2pi/60

            = 4.7124 rad/s

So,the angular velocity is W = 4.7124 rad/s

b) We have relation between the angular velocity and time period is  

W = 2pi /T

T = 2pi/W

T = 2pi/4.7124 s

T = 1.333 s

Angular velocity is a physical quantity that describes the rate of change of the angular displacement of an object with respect to time. It is a vector quantity, and its direction is perpendicular to the plane in which the object is rotating. The magnitude of the angular velocity is given by the ratio of the angular displacement of the object to the time taken to complete the displacement. It is measured in radians per second (rad/s).

Angular velocity is an important concept in physics and is used in the study of rotational motion. It is used to calculate the centripetal force required to maintain circular motion and is also used to describe the motion of planets and other celestial bodies. In addition, angular velocity is used in engineering and mechanics to design and analyze rotating machines and devices.

To learn more about Angular velocity visit here:

brainly.com/question/29611817

#SPJ4

Answer: I am assuming you're asking for the cliff height, which is 24M

We can use the kinematic equations to find the horizontal and vertical components of the ball's velocity and its final position.

The initial velocity components are:

v_x = 33 m/s * cos(60∘) = 28.6 m/s

v_y = 33 m/s * sin(60∘) = 33 * √3/2 m/s

The displacement components can be found using the kinematic equation:

x = v_x * t = 28.6 m/s * 4.0 s = 114.4 m

y = v_y * t - 0.5 * g * t^2 = 33 * √3/2 m/s * 4.0 s - 0.5 * 9.8 m/s^2 * (4.0 s)^2 = 102.4 m - 78.4 m = 24.0 m

The ball lands on the edge of the cliff, so its height must be equal to h, or:

y = h

24.0 m = h

So, the height of the cliff is 24.0 m.

Kinetic energy depends οn the velocity of the object squared. This means that when the velocity of an οbject doubles, its kinetic energy quadruples.

The energy an οbject has as a result of motion is referred to as kinetic energy. If we want tο accelerate an object, we must exert force. To apply a force, we must wοrk hard. When the work is done, energy will have been transferred tο the item, causing it to move at a new, constant speed.

This equation demοnstrates the direct relationship between an object's kinetic energy and the square οf its speed. Therefore, for every twofold increase in speed, the kinetic energy will increase by a factοr of four. A threefold increase in speed will result in a nine-fοld increase in kinetic energy.

Learn mοre about Kinetic energy here:

brainly.com/question/25959744

#SPJ1

Answer:

Explanation:   In a series circuit, the output current of the first resistor flows into the input of the second resistor; therefore, the current is the same in each resistor. In a parallel circuit, all of the resistor leads on one side of the resistors are connected together and all the leads on the other side are connected together.

The direction of the force is along the line joining the two charges, and its magnitude is approximately 1.44 x 10^-12 N.

Magnitude can be defined as  the maximum extent of size and the direction of an object.

The force on the electron can be found using Coulomb's law:

F = k * (q1 * q2) / r^2

where

In this case, the two charges have the same magnitude Q = 2 x 10^-7 C, so we can write:

F = k * [(Q * -Q) / (0.15 m)^2]

where the negative sign for one of the charges indicates that it has the opposite charge to the other. Simplifying this expression, we get:

F = k * (Q^2 / 0.0225)

F = (9 x 10^9 N*m^2/C^2) * (2 x 10^-7 C)^2 / 0.0225

F ≈ 1.44 x 10^-12 N

Therefore, the direction of the force is along the line joining the two charges, and its magnitude is approximately 1.44 x 10^-12 N.

Learn more about magnitude  here : brainly.com/question/30337362

#SPJ1

Answer:

calculate the expected time of arrival, we need to divide the total distance by the speed of the truck.

In this case, the expected time of arrival would be:

640 km ÷ 110 km/h = 5.82 hours

So the driver should be able to arrive at the destination within 6 hours if he can hold his current speed.

The keys will land 19.32 meters away from the base of the cliff.

Assuming that there is no air resistance, the motion of the keys can be described using the equations of motion for constant acceleration.

The initial horizontal velocity of the keys is 6.0 m/s, and the vertical velocity is zero. The acceleration due to gravity is 9.8 m/s^2, and it acts vertically downwards.

The time taken for the keys to fall from the top of the cliff to the ground can be found using the equation:

h = 1/2 * g * t^2

where h is the height of the cliff (42 m), g is the acceleration due to gravity (9.8 m/s^2), and t is the time taken.

Rearranging this equation to solve for t, we get:

t =√(2h/g)

t =√(2*42/9.8)

t = 3.22 s

During this time, the keys will have travelled a horizontal distance equal to their initial velocity multiplied by the time taken:

d = v * t

d = 6.0 * 3.22

d = 19.32 m

Therefore, the keys will land 19.32 meters away from the base of the cliff.

Learn more on distance and velocity here https://brainly.com/question/26046491

#SPJ1

The number of amino acids different between sequence 1 and sequence 2 is 2.

The translations of sequence 1 and sequence 2 are different because:

Nucleotides are the building blocks of nucleic acids, such as DNA and RNA. They consist of a nitrogenous base, a sugar molecule (ribose or deoxyribose), and a phosphate group. The nitrogenous bases in nucleotides can be adenine, guanine, cytosine, or thymine (in DNA) or adenine, guanine, cytosine, and uracil (in RNA).

Nucleotides are linked together to form long chains, which make up the backbone of nucleic acids. The sequence of nitrogenous bases in nucleotides determines the genetic information stored in DNA.

Learn more on nucleotides here: https://brainly.com/question/1569358

#SPJ1

Answer:

Explanation:

You want the magnitude and direction of the change in velocity from 65.0 m/s south to 20.0 m/s west.

The change in velocity can be represented by a vector from the initial velocity to the final velocity as shown in the attachment. The magnitude and direction of it can be found using the usual tools for solving triangles.

The magnitude of the change is the hypotenuse of a right triangle with legs 20 and 65. Its value is ...

  ∆ = √(20² +65²) = √4625 ≈ 68.007 . . . . m/s

The magnitude of the velocity change is ∆ = 68.0 m/s.

As the diagram shows, the direction of the change is west of north by an angle θ that satisfies ...

  tan(θ) = 20/65

  θ = arctan(20/65) ≈ 17.1027°

The direction of the change measured from east is 90° +17.1° = 107.1°.

The angle of the velocity change is about 107.1°.

__

Additional comment

These calculations are handled neatly by a vector calculator, as shown in the second attachment.

The normal force is 53.3 N.

We have to note that the force that is acting on the object may be a single force or a system of forces. In this case, the force that is acting on the object would have many components including the normal force.

You must note that the normal force is the force that in a direction that is opposite to the weight of the object but does have the same magnitude as the weight of the object.

Thus we can see that the normal force is obtained from;

R = mgcosθ

m = mass

g = acceleration due to gravity

θ = angle

R = 6 * 9.8 * cos 25

R = 53.3 N

Learn more about normal force:https://brainly.com/question/30436126

#SPJ1

The following file extensions are

.avi: Audio Video Interleave file format

.rtf: Rich Text Format file format

.pdf: Portable Document Format file format

.txt: Text File format

File extensions are used by computer operating systems and applications to determine which program to use to open a file and how to handle it.

A file extension is a series of characters that follow the last period in a filename and indicates the format of the file. It is a way of identifying the type of data stored in a file, such as a text document, image, audio or video file, spreadsheet, or executable program.

To learn more about File extensions :

https://brainly.com/question/12325790

#SPJ4

The speeds of the object at the various positions are :

The formula to determine the velocity or speed is given below:

velocity or speed = √(2s * F/m)

where:

The speeds of the object at the various points are given below:

At x = A: force = 9 N; s = 6 m

speed = √(2 * 6 * 9 / 38)

speed = 2.06 m/s

At x = B; Force = 9 N; s = 12 m

speed = √(2 * 12 * 9 / 38)

speed = 2.38 m/s

At x = C; Force = 0 N; s = 18 m

speed = √(2 * 12 * 0 / 38)

speed = 0 m/s

Learn more about speed and position at: https://brainly.com/question/29598133

#SPJ1

Refraction would cause the red light to bend at the air/glass boundary.

While the question is unclear, I assume that you are trying to know something about the refraction of the red light across the air/glass boundary. I will tell you something about refraction!

Refraction is a phenomenon of light where it changes direction when it enters a medium with a different refractive index. Refractive index is a measure of how much a medium bends light that passes through it. When light passes from a medium with a lower refractive index to a medium with a higher refractive index, it bends towards the normal (an imaginary line perpendicular to the surface at the point of incidence). On the other hand, when light passes from a medium with a higher refractive index to a medium with a lower refractive index, it bends away from the normal.

Learn more about refraction:https://brainly.com/question/14760207

#SPJ1

Answer:

The rock will be 2 meters from the ground after 1.29 seconds.

Explanation:

The motion of the rock can be described by the following kinematic equation:

h = vi * t + 0.5 * a * t^2

where h is the height of the rock above the ground, vi is the initial velocity (14 m/s), t is time, and a is the acceleration due to gravity (-9.8 m/s^2).

Setting h = 2 m and solving for t, we get:

2 = 14 * t + 0.5 * (-9.8) * t^2

Expanding and solving for t, we get:

t = 1.29 seconds

So, the rock will be 2 meters from the ground after approximately 1.29 seconds.

The final velocity of the truck after the collision is -11.25 m/s.

In this collision, the total momentum of the system before the collision is equal to the total momentum of the system after the collision, since momentum is conserved. The total momentum of the system before the collision can be found by adding up the momenta of the car and truck.

The momentum of the car is given by:

= mass of car * velocity of car

= 1500 kg * 20 m/s = 30000 kg m/s (east)

The momentum of the truck is given by:

= mass of truck * velocity of truck

= 2500 kg * -30 m/s

= -75000 kg m/s (west)

The total momentum of the system before the collision is given by:

30000 kg m/s + (-75000 kg m/s) = -45000 kg m/s

The total mass of the system is given by:

total mass = mass of car + mass of truck = 1500 kg + 2500 kg = 4000 kg

The final velocity of the system is given by:

final velocity = -45000 kg m/s / 4000 kg = -11.25 m/s

Since the final velocity is negative, it means that the system is moving west, which is the direction of the truck's initial velocity.

Learn more about momentum  at:

https://brainly.com/question/18798405

#SPJ1