Answer:
Friction is a resistive force to motion. When two bodies move against each other some of the kinetic energy is converted to heat energy due to friction. This reduces the total kinetic energy in the system. ... Mechanical energy is reduced due to friction and converted to heat.
Explanation:
Kinetic friction does oppose the relative motion of two surfaces. If the one of these surfaces is stationary, then it will tend to slow down the moving object.
If the billing cycle length for a credit card is one calendar month, which of the
following months will result in the greatest periodic interest rate?
O A. December
B. June
C. April
!!!2O D. September
Answer: A.) December
Explanation:
December has the highest number of days in the options given above, with 31 days compared to the others with 30 days within a calendar month. The billing cycle is used to refer to a time interval between the end and the next billing or statement date. In the scenario above, the billing cycle length is monthly, meaning the periodic interest will be paid over a 31 day span time before thre beginning of another cycle.
For example, if periodic interest is $1 per day, this amount totals ($1 × 31) in december compared to the ($1 × 30) Interest in the June, April and September billing cycle.
A machine with a 5-N input force and a 25-N output force has a mechanical advantage of (I point)
02
05.
O20.
O125
Answer:
020
Explanation:
What is the velocity of a bobsled that travels 100 meters in 8.9 seconds in m/s
Answer:
11.2 m/s
Explanation:
Average velocity = displacement / time
v = 100 m / 8.9 s
v = 11.2 m/s
What is the mass of an object that has a weight of 80.0 N?
Explanation:
SUPONIENDO QUE LA ACELERACIÓN DE LA GRAVEDAD ES [tex]9.80 m/s^{2}[/tex]
USANDO LA SEGUNDA LEY DE NEWTON:
m = 80.0 N/[tex]9.80 m/s^{2}[/tex] = 8.16 kg
Answer:
8kg
Explanation:
using the formula Force(F)=mass(m)×acceleration(a),
since we are finding the mass of the object,we will make m the subject by dividing both sides by a.
you will now get m= f/a
the acceleration on Earth is usually 10m/s
m= 80/10
m= 8/1 which is also 8kg
Compare and contrast a series circuit with a parallel circuit. Be sure to
discuss how the wires are connected, how the electrons flow from the
battery how the bulbs work, and what a switch does.
please i need detailed explanation
Answer:
2Micro Farahds
Explanation:
Its in the picture.
I Hope it helps.
please i need detaailed explanation
This is a continuation of the first question.
Answer:
1Farahd
The equivalent capacitance in parallel 6F is now in series with
3F - 2F = 1F
1. Suppose you had come along before Mendeleev and were tasked with
organizing the elements into a pattern others could understand. Describe your
arrangement and how you would determine where elements would be placed.
Can you think of any problems your design might create?
2. The first periodic table was organized according to atomic mass, but the
current periodic table is arranged according to atomic number. What is the
difference between atomic mass and atomic number, and why is the atomic
number now the basis for the periodic table?
3. How would the periodic table look differently if it was arranged according to
atomic mass? Focus on Periods 1-4 to complete your answer.
Answer:
1. There would be two different tables, one arranged by mass and the second arranged by the chemical reactions the elements are known for
2. a. The difference is that the atomic mass is fixed and is 2 or more times the atomic number which is variable
b. The atomic number is the bases of the periodic table because it reflects the unique identity as well as the chemical and physical properties of the atoms more than the atomic number
3. The table formed by the atomic mass is not representative of the chemical properties of the elements
Explanation:
1. The elements would have been arranged by mass and by order of reaction such that there would be two tables where the first table will list all the known elements arranged by mass and the second table will group the elements in the order in which they can react or the kinds of compounds they can form such as oxides, nitrides etc
2. a. The atomic number, Z, is determined by the definitive number of protons contained in the nucleus of an atom and it is used for the classification of an atom as a particular element based on the its equivalent atomic number
The atomic number defines the chemical behavior of an an element because it is equal to the number of electrons present in a neutral atom
The atomic mass or mass number, A, is the total of the mass of the protons and the neutrons present in an atom
The neutron is electrically neutral, allowing its quantity to vary without significantly impacting on the chemical behavior of the atom, hence two different elements can have the same number of neutrons
Therefore, the difference is that the atomic mass is fixed and is 2 or more times the atomic number which is variable
b. The atomic number is the bases of the periodic table because it reflects the unique identity as well as the chemical and physical properties of the atoms more than the atomic number
3. If the periodic table was arranged according to the atomic mass, we would have;
Groups
H
He Li B C O F Na
Be N Ne Mg S Ar Sc
O Si Ca Ti Zn Se
It is seen that the above table is not representative of the chemical properties of the elements.
what is the momentum of a bowling ball with mass of 8.9 kg and a speed of 6.0 m / s
Answer:
The momentum of the bowling ball is 53.4 kg-m/s.
Explanation:
We have,
Mass of a bowling ball is 8.9 kg
Speed of the ball is 6 m/s
It is required to find the momentum of the ball. The momentum of an object is given in terms of its mass and speed as :
p = mv
[tex]p=8.9\times 6\\\\p=53.4\ kg-m/s[/tex]
So, the momentum of the bowling ball is 53.4 kg-m/s.
A golfer is teeing off on a 130.0 m long par 3 hole. The ball leaves with a velocity of 35.0 m/s at 35.0° to the horizontal. Assuming
that she hits the ball on a direct path to the hole, how far from the hole will the ball land (no bounces or rolls)?
Answer:
The ball will land 12.5m before that hole.
Explanation:
The motion of the golf ball can be considered as a projectile motion, where first its height is 0, then it keeps increasing to a maximum point, after which its height starts decreasing again and hits the ground (height becomes 0 again).
We need to calculate the Range (horizontal distance) of the ball which is given as:
[tex]R=\frac{v_i^2{\cdot}sin2\theta}{g}[/tex]
Where
v(i) = initial velocity = 35 m/s
θ = Initial angle = 35°
g = gravitational acceleration = 9.8 m/s
Substitute in the given formula to find Range:
[tex]R=\frac{(35)^2\cdot{sin}(2)(35)}{9.8}\\R=\frac{(1225)(0.94)}{9.8}\\R = 117.5~m[/tex]
Distance between the hole and position where ball lands = 130m - 117.5m = 12.5m
Which situation will the lowest resistance occur
The correct choice is ' C '.
-- Shorter wire has less resistance than longer wire.
-- Thicker wire has less resistance than thinner wire.
-- Colder wire has less resistance than hotter wire.
ANSWER QUICK 40 POINTSSSS
QUESTION 6
Why are the moon’s craters preserved?
A)The moon is windy.
B)There are tectonic plates shifting on the moon.
C)Water preserves them.
D)There are no longer live tectonics occurring on the moon.
QUESTION 7
Why do you see only one side of the moon from Earth?
A)The moon does not rotate.
B)The moon takes longer to rotate than to revolve around Earth.
C)The moon takes less time to rotate than to revolve around Earth.
D)The moon’s period of rotation and revolution are equal.
QUESTION 8
What is the best description of the side of the moon that faces Earth?
A)random
B)The same
C)goes through cycles
D)changes
QUESTION 9
In what position are the moon, the earth, and the sun during the first quarter moon?
A)The moon is between the sun and the earth.
B)Earth is between the sun and the moon.
C)The sun is between the earth and the moon.
D)The moon is to the side of the earth and the sun.
Answer:
For 6 its D
For 7 its A
For 8 its C
For 9 I think its B but Im not sure
Liam is two-years old. His mother is concerned about his behavior. Liam is very different from how his sister Briana was when she was his age. He does not make eye contact. When she smiles at him, he doesn’t smile back. He doesn’t seem to like her hugging or kissing him. It seems that Liam has
Answer:
Autism
Explanation:
Those are some symptoms of autism that you described
Answer:
Autism is the answer
I WILL CHOOSE YOU AS BRAINLIEST
Use scientific evidence to outline how the Big bang theory can be used to explain the origin of the universe and its age.
Answer:
The widely accepted theory for the origin and evolution of the universe is the Big Bang model, which states that the universe began as an incredibly hot, dense point roughly 13.7 billion years ago.
What is special relativity
Answer:
In physics, special relativity (also known as the special theory of relativity) is the generally accepted and experimentally confirmed physical theory regarding the relationship between space and time.
We need special relativity in order to solve for quantum gravity. ... The earth was expanding (thus, it's mass was expanding) through space in all directions in order to create gravity **OOPS** forgot, specifically at an accelerating rate… OR… The space must be pushing toward or down on the earth, from every direction.
Answer:
The theory of special relativity explains how space and time are linked for objects that are moving at a consistent speed in a straight line. ... The theory of special relativity was developed by Albert Einstein in 1905, and it forms part of the basis of modern physics.
Explanation:
Select the smallest value from the choices below. (A) 15 x 10-3 (B) 0.15 x 100 (C) 0.00015 x 103 (D) 150 x 10-3 (E) 0.00000015 x 106
Answer:
E
Explanation:
Plug all of them into a graphing calculator and you will see that the last one is the smallest of them all
Answer:
E
Explanation:
Just use comon sense you will get the answer (No offense)
How does the electric force between two charged objects change when the
distance between the objects increases?
Answer:
When the electric force between two charged objects change, the distance between the objects increases in Iicreasing the separation distance between objects and decreases the force of attraction or repulsion between objects.
Hope it helps.
Which of the following describes an electric motor? Check all that apply. A. Is found in many appliances with moving parts, like a vacuum cleaner or a blender B. Uses the interaction between a spinning coil of wire and a magnet C. Can be powered by a hand crack D. Changes mechanical energy to electrical energy
Answer:
i believe a
Explanation:
What is D ?
Its name the wave diagram.
B: Crest
A: Trough
C: wavelength
I think can someone check that. I think D might be amplitude but i don’t know.
Answer:
wave height ( H)
Explanation:
it is the total summation of crest and trough
6. The peak value of an AC sine wave is
120 V. What's the effective value
(rounded)?
A. 65 V
B. 85 V
C. 200 V
D. 140 V
Answer:
B. 85 V
Explanation:
E(rms) = E(peak-to-peak) / squareroot(2)
E(rms) = 120V / 1.414 = 84.9 V
(When rounded) = 85 V
The correct option about peak value and effective value of AC sine wave is, “85 V”.
What are the differentiating factors between peak value and effective value?Peak value is also known as maximum value.Effective value is also known as RMS (Root Mean Square) value.Maximum value attained by Alternating quantity is defined as Peak value.The square root of average of the square of quantity during a complete cycle is defined as Effective Value. How to do the conversion between peak value and effective value?To convert peak value to effective value, divide the peak value by √2 and the result will be the effective value.To convert effective value to peak value, multiply the effective value with √2 and the result will be the peak value.How to solve this question?Peak value = 120 V (Given)
Effective value = Peak value ÷ √2
Effective value = 120 ÷ √2
Effective value = 85 V (approximately)
Thus, we can conclude that by dividing the peak value by √2, we will get effective value and multiplying the effective value with √2 will give peak value as result.
Learn more about peak value and effective value here:
https://brainly.com/question/15109247
#SPJ2
A student dips a strip of metal into a liquid. Which is evidence that only a physical change has occurred?
Answer:
not sure if this is correct but it is what i know
The metal bends more easily. The metal changes color. The metal gives off light. The metal gives off heat.
Explanation:
What happens to the average kinetic energy of water molecules as water freezes
A. It increases as the water releases energy to its surroundings
B. It increases as the water absorbs energy from its surroundings
C. It decreases as the water releases energy to its surroundings
D It decreases as the water absorbs energy from its surroundings
Answer:
C. It decreases as the water releases energy to its surroundings
Explanation:
The energy that is possessed in the body because of the motion is said to be kinetic energy. When the water freezes, the kinetic energy of the water molecules decreases as the particles stop motion. The energy is released in the surrounding. Freezing takes place when the liquid molecules slow down and lose the kinetic energy to form the solid crystals.
Isabela is an astronomer studying stars A and B. Star A is farther away from Isabela and yet when Isabela observes the stars, the stars appear to have the same brightness. Which would be the best explanation for this? The stars have the same luminosity. Star A is more luminous than star B. Star B is more luminous than star A.
Answer: star A is more luminous
Explanation:
Answer:
B. Star A is more luminous than star B.
Explanation:
on edg
Which object would have the most kinetic energy?
O A. An elephant sitting at the top of a cliff
B. A sloth hanging from a tall tree
C. A mouse running at 11 km/h
D. A zebra running at 10 km/h
Answer:
D
Explanation:
Answer:
It is D
Explanation:
Because kinetic energy ALSO depends on mass (weight) so it has to be moving and has to have weight in order to be called kinetic energy.
At which point is the potential energy the greatest? At which point is kinetic energy the greatest?
Answer:
Kinetic energy is greatest at the lowest point of a roller coaster and least at the highest point.
hope it helps you make me as brainlylistPotential energy will be greatest at the points A and G, and kinetic energy will be greatest at the point D.
• The energy possessed by an object due to its motion is termed as the kinetic energy. On the other hand, the energy stored within an object because of its position relative to some zero position is known as the potential energy of the object.
• Kinetic energy is highest when the velocity is the highest, in the case of pendulum, this takes place at the bottom. In the given case, that is, at point D.
• If kinetic energy is highest at point D, then at the same point potential energy will be the lowest.
• Therefore, potential energy would be highest at its highest point on each of the side of its motion where it remains stationary for some time, that is, at point G and A.
Thus, kinetic energy would be highest at point D, and potential energy would be highest at the points A and G.
To know more about:
https://brainly.com/question/20748548
How much blood does the average adult have
Which term best describes this step of the investigative process?
question
communication of results
peer review
experiment control
Answer:
peer review
Explanation:
The investigative process involves the development and inclusion of the steps involved to find an answer or solution to a specific question. Certain steps are followed in the process. The hypothesis is formulated, tested, and modified during the whole process. peer review involves the suggestions, comments, and interpretation of people in similar fields about the hypothesis. The given extract focuses on the investigative process of peer-reviewing. The review of the scientists from different countries has been asked to give their suggestions and advice on the journal before its publication.
hi:) is question 6 correct?
-- When you see the words "uniform speed", that means the car's speed is not changing.
-- Right under those words in the picture, there's a note to remind you that "uniform speed" also means "acceleration is zero".
-- The whole key to this question is to find out if you remember that acceleration and net force always go together.
.==> If there's net force, then there's acceleration.
.==> If there's acceleration, then there's net force.
.==> If there's NO net force then there's NO acceleration.
.==> If there's no acceleration, then there's no net force.
-- In this picture, there's no acceleration, so there's no net force.
-- The driving force on the car is 2000N forward.
-- But the car's speed is not changing, so the net force on the car must be zero.
-- So that 'resisting' force pulling the car backwards must be 2000N. Then the net force on the car adds up to zero.
-- If the resisting force pulling the car backwards is not zero, then the net force on the car would not be zero, and the car's speed would be changing.
A group of students gather for some fun during their summer break from school. Kendall and Jacoby have a water balloon fight during one of those “lazy” days of summer.
Marie, Gary, and Lois remember a video about work that their science teacher, Ms. Lewis, showed them before they left for vacation.
Marie says: “If Kendall throws a water balloon at Jacoby, there is no work being done. It’s just boys being boys.”
Gary says: “If Kendall throws a water balloon at Jacoby, there is work being done by Jacoby because he has to run.”
Lois says: “If Kendall throws a water balloon at Jacoby, there is work being done because Kendall had to exert a force that made the water balloon travel a certain distance to hit Jacoby.”
Which one of them is correct and why? Answer in complete sentences! You can type on this document and turn in.
Answer:
lois is right because throwing the water balloon is exerting a force running is not
can someone help m e
Answer:
A.when the distance is very close from the source
Explanation:
Answerwhen the distance is very close from the source
Explanation: A
