8. the potassium spectrum has an intense double with line at 766.494nm and 769.90nm Calculate the frequency difference between these two lines?​

K+ and Cl- ions are not included in the net ionic equation for the precipitation involving cacl2 and k2co3 solutions.

By taking note of each cation's name, symbol, and charge, one can determine the ionic compound's formula. Once the anion's identity has been established, record its symbol or charge. Create an electrically neutral substance by mixing the two ions.

Only the ions that really are present throughout a process are shown in chemical equations called ionic equations. Ions that mix in liquid to react and form new compounds is another way to say it. The other ions who choose not to participate are known as spectator ions.

To know more about  ionic equation visit:

https://brainly.com/question/29299745

#SPJ4

the masses expect for nitrogen gas. Let's say x is the mass of nitrogen gas.

X=7g reaction of given the equation representing .

Nitrogen is important to the chemical industry. It is used to make fertilisers, nitric acid, nylon, dyes and explosives. To make these products, nitrogen must first be reacted with hydrogen to produce ammonia. This is done by the Haber process.

Every year people are killed by breathing “air” that contains too little oxygen. Because 78 percent of the air we breathe is nitrogen gas, many people assume that nitrogen is not harmful. However, nitrogen is safe to breathe only when mixed with the appropriate amount of oxygen.

To know more about nitrogen visit

https://brainly.com/question/16711904

#SPJ4

The amount, in grams, of [tex]CH_4[/tex] needed to produce 44.2 g of [tex]CHCl_3[/tex] would be 5.93 grams.

Chloroform, [tex]CHCl_3[/tex], is formed from the reaction of methane with chlorine according to the following chemical equation:

[tex]CH_4+3Cl_2 --- > CH_3Cl +3HCl[/tex]

From the equation, the mole ratio of methane to chloroform is 1:1.

Given 44.2 g of [tex]CHCl_3[/tex], the equivalent mole would be:

Mole = mass/molar mass = 44.2/119.38 = 0.37 moles

From the mole ratio established from the balanced equation of the reaction, the equivalent mole of methane, [tex]CH_4[/tex], needed will also be 0.37 moles.

Now, let's convert the mole to mass.

Mass = mole x molar mass

The molar mass of methane is 16.04 g/mol

Mass of 0.37 moles of methane = 0.37 x 16.04 = 5.93 grams

In other words, the amount of methane needed to produce 44.2 grams of chloroform would be 5.93 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29841194

#SPJ1

I'm choosing a value of 298 K, a volume of 1 liter, and 2 and 4 particles to compare the effects of volume and intermolecular forces in this specific scenario, which will be larger than what the ideal gas law predicts.

How do intermolecular forces differ depending on volume?

The intermolecular distances between gaseous molecules are generally large at low pressures, but as the gas pressure rises, they get less and less (Figure 5.10. 3). As a result, its volume taken up by the molecules rises much over the container's volume.

Why does the ideal gas rule break out at high pressures for gases?

It is assumed that the molecules in an ideal gas have no gravitational pull on one another and take up no space. However, real molecules do have limiting volumes and are attracted to one another. Therefore, under high pressures, a gas behaves differently than it should because of the attraction between its molecules.

To know more volume about :

https://brainly.com/question/13338592

SPJ4

Answer:

when the atom have electrons more than protons

and thats what called negative ion

Explanation:

Generally, The functional group present in U is likely alcohol or a carboxylic acid, as it produces effervescence when heated with sodium metal (a common test for the presence of these functional groups). The functional group present in W is likely an aldehyde or a ketone, as it produces a sweet, fruity smell when warmed with U in the presence of a catalyst.

The gas produced by the reaction between U and sodium metal is likely hydrogen gas (H2). The gas produced by the reaction between W and sodium hydrogen trioxocarbonate (IV) solution is likely carbon dioxide (CO2).

The reaction between U and sodium metal is likely a substitution or neutralization reaction. The reaction between U and W is likely an oxidation reaction, as a catalyst is required for the reaction to occur and it produces a sweet smell.

The catalyst used in the reaction between U and W is likely a strong oxidizing agent such as potassium permanganate or a Tollens' reagent.

If the molar mass of W is 74 g/mol, the molecular formula of the compound is likely C2H6O, as this is the simplest molecular formula that has a molar mass of 74 g/mol.

The structural formula of the compound would be a simple straight-chain alcohol like CH3-CH2-OH

The reaction between magnesium and 1.0 mol dm-3 ethanoic acid would be slower than the reaction between magnesium and 1.0 mol dm-3 hydrochloric acid because ethanoic acid is a weaker acid than hydrochloric acid. This means that it will have a weaker attraction to the electrons in the magnesium metal, making it less likely to react and therefore the reaction will be slower.

Read more about  functional Group

https://brainly.com/question/14618322

#SPJ1

The answer in terms of the variables C₁, C₂, C₃, and C₄ i Cequation is

(C₁ + C₂)(C₃ + C₄)/ C₁ + C₂+C₃ + C₄

A component or circuit's capacitance is its capacity to accumulate and store electrical charge as a form of energy. Energy-storing devices known as capacitors come in a variety of sizes and shapes.

C₁ and C₂ are parallel. C₃ and C₄ are parallel in a similar manner. The two parallel combinations are connected to one another in a series. To determine the equivalent capacitance, we use the series and parallel combination concept.

C₁ ₂ = C₁ + C₂

C₃ ₄ = C₃ + C₄

Ceq = C₁ ₂ C₃ ₄/C₁ ₂ + C₃ ₄

Ceq =  (C₁ + C₂)(C₃ + C₄)/ C₁ + C₂+C₃ + C₄

To know more about capacitance visit:

https://brainly.com/question/14746225

#SPJ4

Answer:

When the liquid gains energy the particles move more rapidly causing an increase in the volume. When the liquid gains energy the particles move more slowly causing a decrease in volume.

Hope this helps - Please mark as Brainliest

Gallium radioactive isotopes are utilized to scan and detect cancers within the human body. Gallium has an average mass of 69.723 amu. Isotope B has a mass of 68.925 amu.

Isotopes are atoms with the equivalent number of neutrons but differing numbers of neutrons. They differ in mass, which affects their physical characteristics even if they have nearly identical chemical properties. a type of chemical element where the protons are all the same number but the neutrons are all different. Carbon isotopes include, for instance, c 12, carbon 13, & carbon 14.

abundant isotope A = 100 - abundant isotope B

= 100 - 60.108

= 39.892%

mass of isotope B = x amu

Average mass = ( mass of isotope A * abundance of isotope A+ mass of isotope B * abundance of isotope B)/100

69.723 = (70.9247050*39.892 + x ⋆ 60.108)/100

= 4142.971668

= x⋆ 60.108

x= 68.92546197amu

Mass of isotope B = x

= 68.925 amu

To know more about isotopes visit:

https://brainly.com/question/27475737

#SPJ4

The 0.1857 mg/L additional concentration of nitrogen the river water due to the farmer' fertilizer.

Please take a look at our nitrogen-rich fertilizers, which consist of the following: if you want to increase the nitrogen content of your soil. 21-0-0 Ammonium Sulfate 4-0-0 Crustacean Meal. 12-0-0 Feather Meal.

Manures, ground-up animal parts (blood meal, feather dust, leather dust), and seed meals are the richest organic sources of nitrogen (soybean meal, cottonseed meal).

Given that a farmer uses 1550.1 kg of fertilizer → 10% nitrogen

15% of the fertilizer is said to be washed into the river,

(15/100) × 1550.1 = 232.51 kg

The amount of  nitrogen molecule in the washed fertilizer is :

10%  of 232.51 kg

= (10/100) × 232.51 kg

= 0.1 × 232.51 kg

=kg in a year.

The river flows at an avg. rate of 0.1401 ft³/sec

Then the amount of river water in a year = [tex]0.1401\frac{ft^3}{sec} *3.155*10^7sec[/tex]

since 1 ft³ = 28.3168 L

the amount of river water in a year = [tex]0.1401(28.3168)*3.155*10^7[/tex]

the amount of river water in a year = 125164645

The concentration of nitrogen molecule= mass/volume

[tex]=\frac{ 23.25 *10^6mg}{125164645L}[/tex]

= 0.1857 mg/L

To know more about fertilizer visit:

https://brainly.com/question/27428418

#SPJ4

atom forms a double bond with an oxide (O) atom and a single bond with a carboxylic group (OH).The pKa of acetic acid is 4.75. CH3COO- = 5.0510. Hence it is an acidic solution.

In their reactions, carboxylic acids frequently function as a base. The proton that the carbonyl oxygen molecule receives considerably increases the + energy on the carbocation.it is a acidic buffer as it contains acetic acid (weak acid) and it salt with strong base(NaOH) so the formula is = pH= pka+ log(salt)/(weak acid) hence ... pH=4.75+ log(0.25)/(0.125) =4.75+ log(2) =4.75+0.3010 =5.0510

Carbonyl substances with a double bond between carbon and oxygen include aldehydes, ketone, and carboxylic acids. These organic substances have numerous industrial uses in addition to being very significant in the science of organic chemistry.

To know more about carboxylic visit:

https://brainly.com/question/30160762

#SPJ4

The total pressure in the flask in atm would be 6.4 atm.

The law guiding the pressure of a mixture of gases was formulated by Dalton. It is known as dalton's law of partial pressure of gases. According to this law, the total pressure exerted by a mixture of gases in a container is the sum of the individual partial pressure of the gases.

The law can be mathematically expressed as:

[tex]P_{total}[/tex] = [tex]P_1 + p_2 + ...... P_n[/tex]

Where P is the partial pressure of the individual gases.

In this case, [tex]P_H_2[/tex] = 3.6 atm and [tex]P_O_2[/tex] = 1.8 atm

[tex]P_{total}[/tex] = 3.6 + 2.8

        = 6.4 atm

In other words, the total pressure in the sealed container would be 6.4 atm.

More on the partial pressure of gases can be found here: https://brainly.com/question/30235822

#SPJ1

Answer:

5.4 is the correct answer

A final temperature for copper is 380.12 degrees celsius, according to the question.

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gram, also known as specific heat. Typically, units and joules / gram per degree Celsius are used as the measure of specific heat. For instance, water has a specific heat of 1 calories (about 4.186 joules) each gram per degree Celsius.

To know more about Specific Heat visit :
https://brainly.com/question/11297584

#SPJ4

Amount of energy absorbed per gram of copper:

4.689 kJ ÷ 34.2 g = 137.4 J/g

The specific heat of copper:

137.4 J/g ÷ 0.385 J/g⋅°C = 357.5 °C

24.0 °C + 357.5 °C = 381.5 °C

A material's specific heat is a thermodynamic characteristic that quantifies the amount of energy required. The units used to describe it are joules per kilogram-kelvin (J/kg-K). As it relates to a material's capacity to store and transmit thermal energy, it is a crucial feature for understanding how materials react to variations in temperature. Specific heat can range between only few hundred joules per kilogram-kelvin in gases through a few thousand for solids, depending on the substance.

To learn more about specific heat
https://brainly.com/question/27862577
#SPJ4

Answer:

simply use the differentiation method

alkane members are single bonded and are Sp3 hybridized with tetrahydral geometry

Alkenes or other atoms with double bonds are Sp2 hybridized and Alkynes is a triple bond with Sp hybrid

you can also use the steric number formula which is Atoms+lone pairs =Steric number

in this case the type of bond doesn't matter

Nitrogen dioxide (NO2), a dark brown gas, is created when nitric oxide (NO) and oxygen react. O2 has a mole count of 0.4317.

The energy-producing process that powers the metabolism rate of most living organisms, respiration, depends heavily on oxygen. All living things, including humans, depend on the air that people breathe to survive.

People with respiratory disorders like Bronchitis, COVID-19, bronchitis, sleep apnea, and others can benefit from hypoxemia therapy to help them obtain enough oxygen to work and stay healthy. Hypoxemia, or low blood oxygen levels, can kill you and harm your organs. Rehabilitation may be required permanently or only sometimes.

Mole of NO = 0.866 mole

Mole of O₂ = 0.503 mole

0.866 mole of NO will require = 0.866 / 2

= 0.4317 mole of O₂

To know more about oxygen visit:

https://brainly.com/question/6669845

#SPJ1

Answer:

FALSE

Explanation:

The temperature of the air has a significant impact on the speed of sound in that medium. The square root of the absolute temperature of the air determines the speed of sound in that medium. The speed of sound rises along with temperature.

The speed of sound is also influenced by pressure, however this influence is minimal. The speed of sound will rise with increasing pressure and decrease with decreasing pressure, however the effect is quite tiny in comparison to the influence of temperature.

In conclusion, air temperature has a significant impact on the speed of sound in air, with pressure having a marginally smaller impact.

Hydrogen and oxygen are elements and make up the chemical molecule water. Reverse chemistry, in general, decomposes substances into their constituent parts. As an illustration, the process of electrolysis allows the complex water to be broken down into the components hydrogen and oxygen.

To Learn more About chemical molecule refer To:

https://brainly.com/question/475709

#SPJ4

The pressure of the system, when the amount of gas is reduced to 0.13 mole and the temperature is reduced to 100 K, can be calculated using the combined gas law. The pressure of the system is approximately 277.28 mmHg.

1. Identify the given values:

  Initial amount of gas (n1) = 0.25 moles

  Initial pressure (P1) = 760 mmHg

  Initial temperature (T1) = 298 K

  Initial volume (V1) = 6.1 L

  Final amount of gas (n2) = 0.13 moles

  Final temperature (T2) = 100 K

2. Apply the combined gas law, which states:

  (P1 * V1) / (n1 * T1) = (P2 * V2) / (n2 * T2)

3. Plug in the values into the formula:

  (760 mmHg * 6.1 L) / (0.25 moles * 298 K) = (P2 * 6.1 L) / (0.13 moles * 100 K)

4. Rearrange the equation to solve for P2, the final pressure:

  P2 = [(760 mmHg * 6.1 L) * (0.13 moles * 100 K)] / [(0.25 moles * 298 K)]

5. Perform the calculations:

  P2 = (466.76 * 13) / (74.5)

  P2 ≈ 277.28 mmHg

6. The pressure of the system, when the amount of gas is reduced to 0.13 mole and the temperature is reduced to 100 K, is approximately 277.28 mmHg.

For more such questions on temperature, click on:

https://brainly.com/question/27944554

#SPJ8

[tex]\rm NaOH[/tex], [tex]\rm AgOH[/tex], [tex]\rm Ca(OH)_2[/tex], [tex]\rm Zn(OH)_2[/tex] are Arrhenius bases, [tex]\rm HClO[/tex], [tex]\rm H_3PO_4[/tex], HF, HBr are Arrhenius acids and NaCl, [tex]\rm CH_4[/tex] are Neither.

When dissolved in water, an acid is a chemical that raises the concentration of hydrogen ions. Acids often taste sour, can turn blue litmus paper red, and can release hydrogen gas when they react with certain metals.  A base, sometimes referred to as an alkali, is a chemical that raises the level of hydroxide ions in water when it is dissolved in it. When dissolved in water, an Arrhenius base raises the concentration of hydroxide ions in the solution. When dissolved in water, an Arrhenius acid is a chemical that raises the concentration of hydrogen ions in the solution. Neither Arrhenius acids nor bases are substances that do not split into ions when dissolved in water.

Arrhenius bases: [tex]\rm NaOH, AgOH, Ca(OH)_2, Zn(OH)_2[/tex]

Arrhenius acids:[tex]\rm HClO, H_3PO_4, HF, HBr[/tex]

Neither: [tex]\rm NaCl, CH_4[/tex]

To know more about Arrhenius bases and Arrhenius acids, here:

https://brainly.com/question/9936252

#SPJ12

The process that was used in this lab to create magnesium oxide by using oxidation type of reaction and it relates to conservation of matter

The total mass of reactants and products in a chemical reaction must equal one another, according to the law of conservation of mass.

1. The method used in the laboratory to produce MgO

According to the following equation, Mg is weighed in a crucible and heated in air that strongly reacts with O₂ to produce MgO:

1/2O₂ + Mg + = MgO

and the growth in the mass of magnesium in the crucible supports this.

2. The kind of chemical reaction that occurred:

Since the magnesium gained O and was oxidized to MgO, it is thought to be an oxidation reaction.

3. The following explains why the product was heavier than the reactant:

The product had a higher mass due to the gain of O atom over the reactant Mg because the reactant (Mg) bonded to O and formed MgO.

4. In relation to the conversation of matter:

According to the law of conversation of matter, matter can be changed from one form to another but cannot be destroyed or created from nothing.

Here, Mg and O2 changed into MgO, fixing the presence of matter and the conversation of mass.

If we have 1.0 mole of magnesium, it will react with 0.5 mole of oxygen to form 1.0 mole of magnesium oxide.

The Mg mass is = n x molar mass of Mg

The Mg mass is= (1.0 mole) (24.30 g/mol)

The Mg mass is = 24.3 g.

The mass of O₂ is =  n x molar mass of O₂

The mass of O₂ is= (0.5 mole) (32.00 g/mole)

The mass of O₂ is = 16.0 g.

The MgO mass is = n x molar mass of MgO

The MgO mass is  = (1.0 mole) (40.30 g/mol)

The MgO mass is = 40.3 g/mol.

The reactants mass is = The mass of Mg + The mass of O₂

The reactants mass is = 24.3 g + 16.0 g = 40.3 g.

The  products mass is = The mass of MgO = 40.3 g.

∴ The mass of the reactants is equal to the mass of the products.

Therefore, there is a conservation of matter.

To know more about conservation of matter visit:

https://brainly.com/question/12013046

#SPJ4

Complete question is " Describe the process that was used in this lab to create magnesium oxide, specifically identifying the type of chemical reaction. Explain why the product had a higher mass than the reactant, and how this relates to conservation of matter".

Answer:

c. The solubility of lithium chloride will increase

To avoid bumping, we  hazard  shouldn't stir for too long or too quickly. Use safety eyewear to avoid burn threats and make sure its test tube's entrance is pointed away from you and anyone else.

A risky phenomenon, substance, action, or state of affairs is referred to as a hazard. Loss of life, disease or other negative health impacts, property damage, lost livelihoods and services, social and economic disruption, or environmental devastation are all possible outcomes.

The top 10 workplace threats that are more common have been listed below: A few examples of dangerous chemicals are acids, caustic compounds, cleansers, glues, poisonous substances (mercury, lead, aluminium), paint, pesticides, petroleum, and solvents.

To know more about hazard visit:

https://brainly.com/question/28066523

#SPJ4

Compounds are referred to as molecular because they are a solid that is hard, smooth, and odourless and are insoluble in water. if the solid spends 10 minutes in contact with a normal laboratory burner's flame.

Moles are composed of nonmetals (or covalent compounds). Atoms of different elements mix in specific proportions to form molecules of compounds. such as carbon dioxide, water, and ammonia. In ionic compounds, both metals and nonmetals can be present. Ionic substances are categorised as having both positive and negative ions. The terms "cation" and "anion" are used to describe different types of ions. While metal ions surrender their electrons to form cations, non-metals take electrons to form anions. The ions are composed of both positive and negative ions.

Learn more about compounds here

https://brainly.com/question/13516179

#SPJ4

Answer: Chemical Change

Explanation:

A chemical change is a change in which a chemical substance is transformed into one or more different types of substances. Chemical changes happen through the process of chemical reactions resulting in substances with different properties.

Chemical changes are irreversible and also known as permanent changes in which a completely new substance is formed.

A carbonyl group of a ketone or an aldehyde can be reduced using a variety of techniques; however, the Clemens technique is indeed the one reduction technique that would work best in an acidic environment.

A carbon atom is double-bonded to an oxygen atom to form the chemically organic functional group known as a carbonyl group ([C=O]). Aldehydes and ketones are the most basic carbonyl groups, and they are typically joined to another carbon molecule. Numerous aromatic chemicals that affect taste and smell contain these structures. In organic chemistry, a carbonyl group is a functional group having the formula C=O. It is divalent at the carbon atom and is made up of two carbon atoms double-bonded to one oxygen atom. It occurs often in many different kinds of chemical compounds and is a component of numerous larger functional groups.

Members of the "C=O" carbonyl group are carbonyl compounds, or "X-C=O" compounds. To create carboxylic acid molecules, a carbonyl group is joined to an oxygen atom on one side. Anhydrides, esters, and other derivatives belong to this class.

To know more about Carbonyl visit:

https://brainly.com/question/21440134

#SPJ4

You cannot determine which gas would have faster speeds based solely on the same temperature.

Temperature is the measure of the average kinetic energy of the molecules in a given system. Temperature is measured in units of energy such as Celsius, Fahrenheit, and Kelvin, and is expressed as a numerical value. Temperature can be used to measure the physical properties of a material such as its boiling point and melting point. Temperature is also used to measure the degree of heat or coldness of a body or environment.

The speed of the gas particles depends on the mass of the individual particles, the type of motion they are performing (translational, rotational, or vibrational), and the force that is acting on them.

To learn more about temperature here:

brainly.com/question/4735135

#SPJ4

The strongest type of intermolecular force present between two NH2CH3 is Hydrogen bonding.

The intermolecular force is an electrostatic attraction between positive and negative poles of molecules. The electrostatic force is directly proportional to the strength of a physical property. The strength of an intermolecular force based on the magnitude of the charges and the distance between each other. strongest type of intermolecular force in methylamine is Hydrogen bonding. Hydrogen bonding is a special type of dipole-dipole force. It arises between the H atom bonded to an N, O, F atom of one molecule and the N, O, F atom of another. It is stronger than dipole-dipole forces. it is due to the electronegativity of the N, O, and F atoms and the polarity between the electronegative atoms and the H atom.

To learn more about Intermolecular forces please visit:

https://brainly.com/question/12243368

#SPJ4

The percentage yield for the subsequent chemical reaction is 75.76%.

Chemical elements or chemical compounds make up substances. A response is a movement, propensity, or action that is taken in the opposite direction from what is intended. Reactions are made on the spur of the moment, without much thought or consideration of the potential outcome. Response: Saying something in response to another person's action or comment.

In daily life, there are several examples of chemical processes, such as photosynthesis, rust, baking, digesting, combustion, chemicals batteries, fermentation, and cleaning with soap and water. Not only in the chemistry lab, but all over the place, there are chemical reactions going on.

Hg=33 grams

HgO=25 grams

Percent yield = HgO/Hg×100

=33/25×100

=75.76%

To know more about Reaction visit:

https://brainly.com/question/3461108

#SPJ4

The compound with the lowest acidity and the highest base, NH2CH3, has the highest Kb value; otherwise, the lower the acidity, the higher this same Kb value, and vice versa.

Stomach acid can enter the esophagus if the sphincter muscle at the bottom of the esophagus relaxes at the wrong time. This could cause heartburn and other symptoms as well. Reflux may be a regular or persistent cause of GERD.

When the pH is too acidic, the cells in the pancreas, small intestine, and stomach that are responsible for producing and secreting digestive juices don't function properly. Bloating, gas, cramps, or indigestion follow as a result of this.

To know more about acidity visit:

https://brainly.com/question/29796621

#SPJ4

For conducting chemical reactions, electrochemical methods rely on electrochemical cells to supply the necessary voltage and current.

How are electrochemical cells dependent on them?

Electrochemical cells, which are machines that use electricity to move ions from one electrode to another, are the foundation of electrochemical methods. I

In an electrochemical cell, a voltage source provides the energy required to move the ions while also driving their motion. A chemical reaction between the electrodes and the ions is sparked by this energy, and the result is a current.

The concentration of the electroactive species in the solution is then determined using the current generated. As a result, electrochemical cells are necessary for electrochemical methods. Chemical reactions can also be used to create energy in electrochemical cells.

To learn more about electrochemical cells refer :

https://brainly.com/question/10470515

#SPJ1