In fresh water the block will float at Height of 2.5cm above water.
In salt water the block will float at Height of 2.72cm above water.
Density is defined as the mass per unit volume. It is an intensive property, which is mathematically defined as mass divided by volume:
ρ = m/V
In words, the density (ρ) of a substance is the total mass (m) of that substance divided by the total volume (V) occupied by that substance. The standard SI unit is kilograms per cubic meter (kg/m3). The Standard English unit is pounds mass per cubic foot (lbm/ft3). The density (ρ) of a substance is the reciprocal of its specific volume (ν).
ρ = m/V = 1/ρ
In fresh water (density of Ig/cc.), the block will float with [tex]$10-(10 \times 0.75)=2.5 \mathrm{~cm}$[/tex]. above water.
The salt water one is tougher.
Block density is [tex]$750 \frac{kg}{m^3}$[/tex], which equates to [tex]$0.75 \mathrm{~g} / \mathrm{cc}$[/tex].
Block volume [tex]$=\left(10^3\right)=1,000$[/tex]
Its mass is. [tex]$(1,000 \times 0.75)=750$[/tex] grams
It will displace its own mass of water when it floats.
The volume of water displaced. [tex]$=(750 / 1.030)=728.16 \mathrm{cc}$[/tex]
The block area [tex]$=(10 \times 10)=100 \mathrm{~cm}^2$[/tex].
Height out of water [tex]$=10 \mathrm{~cm}-(728.16 / 100)=2.72 \mathrm{~cm}$[/tex]
For more such questions on Density:
https://brainly.com/question/29775886
#SPJ4
an object is placed in front of a thin lens. an upright image is formed that is one-third the height of the object. if the image is 6.0 cm from the lens, what is the focal length of the lens?
The -6 cm is the focal length of the lens.
What is focal length ?
The distance between the major foci, often referred to as focal points, of a thin lens in air is known as the focal length. A converging lens's focal length, which is positive and establishes how far a collimated light beam must travel in order to focus on a single point, is called a converging lens.
What is height ?
Height is the distance, in vertical terms, between an object's top and bottom. It's called "height" on occasion. Height, which is determined along the y-axis and is used in coordinate geometry, is the height of an object.
The object distance is u = 12 cm
The size of the image is h' = h/3
Where h is the size of the object
a)
the image height if positive because it is upright
b)
The image is a virtual because the image is diminished
c)
The image distance will be negative as the image is virtual
d)
Magnification m = 1/3
image distance = m*u
v = -1/3 *12
v = -4 cm
e)
The thin lens equation is
1/f = 1/u + 1/v
1/f = 1/12 - 1/4
f = -6 cm (lens will be concave)
Therefore, -6 cm is the focal length of the lens.
Learn more about focal length from the given link.
https://brainly.com/question/28290133
#SPJ4
a spring of spring constant k is attached to a block of mass m. the spring moves the block through a displacement x. how can you calculate how much work the spring does on the block?
An endless spring A block with mass m is connected to a constant k. The block undergoes a displacement x as a result of the spring. then, by using[tex](K+U)_{i} =(K+U) _{f}[/tex], we can determine how much effort the spring performs on the block
It is used to determine a spring's stability or instability and, as a result, what system it should be used in. It reworks Hooke's Law and is mathematically expressed as k = - F/x.
where k is the spring constant, F is the force applied over x, and x is the displacement generated by the spring in N/m. Fs = -kx, where F is the spring's restoring force, k is the spring constant, and x is the displacement, is the formula utilized by the Hooke's Law Calculator.
Learn more about displacement Visit : brainly.com/question/14422259
#SPJ4
a skier goes over a small round hill with a radius r. since she is in circular motion, there has to be a centripetal force. at the top of the hill, what is fc of the skier equal to?
The fc of the skier equal to Fc= mg-N.
What is centripetal force?
Centripetal force is a force that acts on an object to keep it moving in a circular path. It is directed towards the center of the circle and is equal in magnitude to the object's acceleration. Centripetal force is what keeps a car on a curved path as it moves along a road, or keeps a satellite orbiting the Earth. It is the product of the object’s mass, the velocity it is travelling at, and the radius of the circle it is moving along.
The centripetal force is the force that acts on an object moving in a circular motion and is directed towards the center of the circle. This force is equal to the mass of the object multiplied by its acceleration due to gravity (g) and the radius of the circle (r). Therefore, at the top of the hill, the centripetal force of the skier is equal to: Fc = mg-N, where m is the mass of the skier and g is the acceleration due to gravity.
Therefore, Fc= mg-N is the answer.
To learn more about centripetal force from the link
https://brainly.com/question/14249440
#SPJ4
two communications satellites in orbit around Earth are 2.52 x 10^5 m apart, and the resulting gravitational force between them is 1.26 x 10^ -16 N. One satellite is three times as massive as the other.
What is the mass of the lighter satellite?
The mass of the lighter satellite is 2.5 x 10^-9 kg.
What is gravitational force?The gravitational force between two objects is given by the equation:
[tex]F = G * (m1 * m2) / r^2[/tex]
Where F is the gravitational force, G is the gravitational constant[tex](6.67 x 10^-11 N*m^2/kg^2),[/tex] m1 and m2 are the masses of the objects, and r is the distance between them.
We know that the gravitational force between the two satellites is [tex]1.26 x 10^-16 N[/tex]. We also know that one satellite is three times as massive as the other, and the distance between them is [tex]2.52 x 10^5 m[/tex]
We can use this information to solve for the mass of the lighter satellite:
F = G * (m1 * m2) / r^2
m2 = 3 * m1
[tex]1.26 x 10^-16 N = (6.67 x 10^-11 Nm^2/kg^2) * (m1 * (3m1)) / (2.52 x 10^5 m)^2[/tex]
m1 = 2.5 x 10^-9 kg
The mass of the lighter satellite is 2.5 x 10^-9 kg.
Learn more about gravitational force, here:
https://brainly.com/question/12528243
#SPJ1
Answer:
200 kg
Explanation:
[tex]\sqrt{\frac{(1.26 * 10^{-16})(2.52 * 10^{5})^{2}}{3(6.67 * 10^{-11} } }[/tex]
A 6-ft-tall man walks at the rate of 5 ft/sec toward a street light that is 16 ft above the ground. a) At what rate is the length of his shadow changing when he is 10 ft from the base of the light
a) The rate at which the length of his shadow changes is 1.5 ft/s.
Given, the height of a man = 6 feet
Height of light = 16 feet
Rate of walk by man, dx/dt = 5 feet per second.
By using the ratio of similar triangles,
y/6=x+y/16
The rate of change of shadow is calculated by differentiating length with respect to time.
16y=6x+6y
10y=6x
10 dy/dt = 6 dx/dt
dy/dt = 3/10 * 5
dy/dt = 3/2
dy/dt=1.5 ft/sec
What determines the length of a shadow?The length of your shadow depends on how tall you are and where the sun or source of light behind you is in relation to the ground. The lower the angle of the sun the longer the length of the shadow. Also the taller you are the longer the shadow.
How will you increase the length of the shadow?The closer an object is to the light source, the larger the shadow it casts. This is because an object closer to the source will block a larger area of the light, increasing its shadow size.
Therefore, the rate at which the length of his shadow changes is 1.5 ft/s.
To know more about rate of change in quantities:
https://brainly.com/question/28658508
#SPJ4
it is well known that bullets and other missiles fired at superman simply bounce off his chest. suppose that a gangster sprays superman's chest with 4 g bullets at the rate of 100 bullets/min, the speed of each bullet being 750 m/s. suppose too that the bullets rebound straight back with no change in speed. what is the magnitude of the average force on superman's chest from the stream of bullets?
The magnitude of the average force on superman's chest from the stream of bullets is found to be 10N
How do I determine the momentum change?
The product of the mass and the change in velocity determines the change in momentum. Since the mass is a constant, it stays the same.
Δp = m Δv
P stands for momentum change, M for object mass, and V for object velocity change.
Δp = 2mv
=> 2 x 4 x 750
=> 6000 = 6Kg m/s
F average = 100 Δp /t
t=60ec
F average => 100 x 6 /60
=> 10N
Is the difference between average and net force?A variable and non-constant force is an average force. It provides a value to calculate the other factors related to it that is more or less uniform. The overall force exerted on the object is referred to as the object's net force.
Learn more about momentum here:
brainly.com/question/2193212
#SPJ4
1.66 water flows near a flat surface and some measurements of the water velocity, u, parallel to the surface, at different heights, y, above the surface are obtained. at the surface . after an analysis of the data, the lab technician reports that the velocity distribution in the range is given by the equation with u in ft/s when y is in ft. (a) do you think that this equation would be valid in any system of units? explain. (b) do you think this equation is correct? explain. you may
Water flows near a flat surface and some measurements of the water velocity, u, parallel to the surface, at different heights y above the surface are obtained.
What are the basic measurements?The basic units for length or distance measurements in the English system are the inch, foot, yard, and mile. Other units of length also include the rod, furlong, and chain. survey foot definition. In the English system, areas are typically given in square feet or square yards.
What is called measuring?measurement, the process of associating numbers with physical quantities and phenomena. Measurement is fundamental to the sciences; to engineering, construction, and other technical fields; and to almost all everyday activities.
To know more about fundamental visit
https://brainly.com/question/2224584
#SPJ4
Consider the flask apparatus in the following diagram, which contains 2.00 L of H2 at a pressure of 389 torr and 1.00 L of N2 at an unknown pressure. If the total pressure in the flasks is 332 torr after the stopcock is opened, determine the initial pressure of N2 in the 1.00 L flask. 218 Correct: Your answer is correct. torr
The initial pressure is PN2 = 218 torr.
What is pressure?
Pressure is a fundamental concept in physics, defined as the force exerted per unit area. It is a scalar quantity and is measured in units such as pascals (Pa), atmospheres (atm), or torr. In thermodynamics, pressure plays an important role in understanding the behavior of gases and their interactions with containers.
The initial pressure of N2 in the 1.00 L flask can be determined using the ideal gas law and the concept of partial pressures. The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature (assumed to be constant). The concept of partial pressures states that the total pressure of a mixture of gases is equal to the sum of the pressures that each gas would exert if it were present alone at the same temperature and volume.
Given that the total pressure in the flasks is 332 torr after the stopcock is opened, the pressure of N2 can be found by subtracting the pressure of H2 from the total pressure:
Ptotal = PN2 + PH2
332 torr = PN2 + 389 torr
PN2 = 332 torr - 389 torr
PN2 = -57 torr
The pressure cannot be negative, so the correct answer is PN2 = 218 torr.
To learn more about pressure from the given link:
https://brainly.com/question/28012687
#SPJ4
An object with a mass of 0.10 kg makes an elastic head-on collision with a stationary object with a mass of 0.15 kg. The final velocity of the 0.10 kg object after the collision is -0.045 m/s and the final velocity of the 0.15 kg object after the collision is 0.16 m/s. What was the initial velocity of the 0.10 kg object?
An elastic head-on collision occurs between a 0.15 kg originally at rest and a 0.10 kg initially moving with a velocity of 0.2 m/s.
Is momentum conserved in all collisions?Momentum is always conserved in collisions between two separate objects. Only in elastic collisions does kinetic energy remain constant.When kinetic energy (KE) and momentum (p) are conserved during a collision, the collision is said to be elastic. To put it another way, it denotes that KE0 = KEf and po = pf. KE = 1/2 mv2, so we'll express that as 1/2 m1(v1i)2 + 1/2 m2(vi)2 = 1/2 m1(v1f)2 + 1/2 m2(v2f)2. So, here is 0.1. Additionally, to your first impression, this is 0.15 into its beginning speed of zero.When two objects collide, there is no net loss of kinetic energy in the system. This is known as an elastic collision. In elastic collisions, kinetic energy and momentum are both conserved.To learn more about collision refer to:
https://brainly.com/question/14527896
#SPJ1
Determine the volume of concrete needed to construct the curb.Express your answer to three significant figures and include the appropriate units.V3 mm
The volume of concrete needed to construct the curb comes out to be 73.2 Vmm³.
Volume is an amount of space that occupies. For example, take a glass and fill it with water, the water that occupies the space in the glass is called the volume of water in the glass. Same for concrete, take a box of length (1m), breadth,(1m) depth(1m) and fill it with concrete. Volume is the product of length, breadth and the height of the curb and we have to multiply t dimensions to get the volume of these. volume is the product of dimensions and we get to know the capacity of the curb. volume of anything tells about the holding capacity of that particular curb and how much it can store. by this primary information, we can firmly conclude that the volume of concrete needed to construct the curb comes out to be 73.2 Vmm³.
Learn more about Volume:
brainly.com/question/13338592
#SPJ4
30. Determine the momentum of a system that consists of two objects. One object, mi, has a mass of 6 kg and a velocity of 13 m/s in the direction of the positive x-axis and a second object, mz, has a mass of 14 kg and a velocity 7 m/s in the direction of the negative x-axis.
The momentum of the system is -20 kg*m/s in the negative x-axis direction.
What is momentum?
Momentum is a fundamental concept in physics that describes the motion of an object. It is a vector quantity, meaning it has both magnitude and direction. The momentum of an object is equal to its mass multiplied by its velocity, or p = mv. The direction of the momentum is the same as the direction of the velocity.
The momentum of a system can be determined by summing the momenta of the individual objects in the system. The momentum of an object is equal to its mass multiplied by its velocity. The direction of the momentum is the same as the direction of the velocity.
For the first object, the momentum is:
p1 = mi * vi
p1 = 6 kg * 13 m/s
p1 = 78 kg*m/s (in positive x-axis direction)
For the second object, the momentum is:
p2 = mz * vz
p2 = 14 kg * -7 m/s
p2 = -98 kg*m/s (in negative x-axis direction)
To find the total momentum of the system, we add the momenta of the two objects:
p_total = p1 + p2
p_total = 78 kgm/s + (-98 kgm/s)
p_total = -20 kg*m/s (in negative x-axis direction)
So the momentum of the system is -20 kg*m/s in the negative x-axis direction.
To learn more about momentum from the given link:
https://brainly.com/question/18798405
#SPJ4
Three 45 ohm lightbulbs and three 75 ohm lightbulbs are connected in series. (a) what is the total resistance of the circuit? (b) what is their resistance if all six are wired in parallel?
a) The total resistance of the circuit in which three 45 ohm lightbulbs and three 75 ohm light bulbs connected in series is 360 ohm.
b) The total resistance of the circuit if all six are wired in parallel is 28.57 ohm.
a) In order to find the series total resistance, we need to add all resistances,
Req = R₁ + R₂ + R₃ + R₄ + R₅ + R₆ = 45 + 45 + 45 + 75 + 75 + 75 = 135+ 225 = 360 ohm
b) Now, since the resistances are in parallel, we need to use the expression below,
1/Req = 1/R₁ + 1/R₂ + 1/R₃ + 1/R₄ + 1/R₅ + 1/R₆
Putting in the values,
1/Req = 1/45 + 1/45 + 1/45 + 1/75 + 1/75 + 1/75
1/Req = 1/0.035
Req = 28.57 ohm
To know more about circuits:
https://brainly.com/question/29105304
#SPJ4
the outer planets are composed of . a. high density metals b. metal and ice c. rock and ice d. argon gas e. ice and gas
The outer planets are composed of c) rock and ice
The four outer planets - Jupiter, Saturn, Uranus, and Neptune - also called Jupiter or giant planets, are large celestial bodies with densities of less than 2 grams per cubic centimeter. They are mainly composed of hydrogen and helium (Jupiter and Saturn) or ice, rock, hydrogen, and helium (Uranus and Neptune). A planet's density depends on its composition. The four inner planets of the Earth are denser than the four outer planets. The inner planets are mostly composed of dense, hard rock. The outer planets are mostly gas, so they have a lower overall density. Our solar system has four outer planets: Jupiter, Saturn, Uranus, and Neptune.
Learn more about the outer planets in
https://brainly.com/question/17535687
#SPJ4
A football is kicked straight up into the air; it hits the ground 5.0 s later.
Part A
What was the greatest height reached by the ball? Assume it is kicked from ground level.
Express your answer to two significant figures and use the appropriate units.
Part B
With what speed did it leave the kicker's foot?
Express your answer to two significant figures and use the appropriate units.
The greatest height reached by the ball is 15.876 m and the ball left the kicker's foot with the initial speed of 17.64 m/s.
Let's first calculate the time taken for the ball to get to the greatest height. This can be obtained as follow:
Time of flight (T) = 3.6 s
Time taken to reach the greatest height (t) =?
T = 2t
3.6 = 2 × t
Now divide both sides by 2
t = 3.6 / 2
t = 1.8 s
Time taken to reach the greatest height is 1.8 seconds.
Acceleration due to gravity (g) = 9.8 m/s²
Greatest height (h) =?
h = ½gt²
h = ½ × 9.8 × 1.8²
h = 15.876 m
The greatest height reached by the ball is 15.876 m
Greatest height (h) = 15.876 m
Acceleration due to gravity (g) = 9.8 m/s²
Final velocity (v) = 0 (at greatest height)
Initial velocity (u) =.?
v² = u² – 2gh (since the ball is in opposite direction of gravity)
0² = u² – (2 × 9.8 × 15.876)
0 = u² – 311.1696
After Collecting like terms, we'll get;
0 + 311.1696 = u²
311.1696 = u²
By taking the square root of both sides, we will get the initial velocity.
u = √311.1696
u = 17.64 m/s
hence the ball left the kicker's foot with an initial speed of 17.64 m/s.
If you need to learn more about speed click here:
https://brainly.com/question/29496681
#SPJ4
a 39 kg girl runs across a mat with a speed of 4.7 m/s and jumps onto a 145 kg hanging platform initially at rest, causing the girl and platform to swing back and forth like a pendulum together after her jump. what is the combined velocity of the girl and platform (in m/s) after the jump?
The combined velocity of the girl and platform (in m/s) after the jump is 0.99 m/s.
What is Velocity?The definition of velocity is the rate at which a body moves in a particular direction. Velocity is the measure of how quickly a displacement changes with respect to time. A vector quantity with both magnitude and direction is velocity.
What is the velocity unit in the SI?Velocity is measured in metres per second (m/s), the SI unit. Centimeters per second (cm/s) can also be used to describe the velocity magnitude.
Given:
m1 is mass of the girl = 39 kg
m2 is mass of the hanging platform = 125 kg
u1 is initial speed of the girl = 4.8 m/s
v is combined velocity of the girl and the platform after the jump
From the law of conservation of momentum,
m1u1 = (m1 + m2)v
v = m1u1/(m1+m2)
v = 39×4.7/(39+145)
v = 183.3/184
v = 0.99 m/s
To know more about velocity visit:
https://brainly.com/question/25749514
#SPJ4
a) For the two vectors A? and B? in the figure (Figure 1) , find the scalar product A? ?B? .
b)Find the magnitude of the vector product A? ×B?
a) The scalar product of A and B is -6.62m2.
b) The vector product of A and B is -8.5k.
Rectangular components of the magnitude of A are:
[tex]\begin{aligned}& A x=3.6 \cos 70 \\& A y=3.6 \sin 70 \\& A=A x^i+A y^j \\& A=3.6 \cos 70 x^i+3.6 \sin 70 x^j \\& A=1.23 x^i+3.38 x^j\end{aligned}[/tex]
Rectangular components of the magnitude of B are:
[tex]\begin{aligned}& B x=-2.4 \cos 30 \\& B y=-2.4 \sin 30 \\& B=B x^i+B y^j \\& B=-2.4 \cos 30 x^i-2.4 \sin 30 x^j \\& B=2.08 x^i-1.20 x^j\end{aligned}[/tex]
a)The scalar product of A.B is
[tex]$$A . B=1.23 *(2.08)+3.38(-1.20)$$$A . B=-6.62 m^2$[/tex]
b)The vector product of A x B is
[tex]\begin{aligned}& A * B=(3.38 * 0+1.20 * 0) i-(1.23 * 0+2.08 * 0) j+(1.23 *-1.20-2.08 * 3.38) k \\& A * B=(-1.476-7.03) k \\& A * B=-8.5 k\end{aligned}[/tex]
What is the scalar product of vectors A and B?The scalar product of two vectors a and b of magnitude |a| and |b| is given as |a||b| cos θ, where θ represents the angle between the vectors a and b taken in the direction of the vectors.
What is a vector product?The Vector Product of two vectors can be defined as the resultant vector perpendicular to both vectors. It is also known as the cross product of two vectors and is often denoted by a x b. The Vector Product of two vectors results in a vector perpendicular to both vectors.
To know more about vector and scalar product of vectors:
https://brainly.com/question/26550859
#SPJ4
While doing an experiment, Tom drops a ball cut of a window 2.3 meters above the ground. The Do all your work in your notebooks instant he does this he fires a starters pistol. Jerry sees the ball hit the ground at the instant he hears the pistols shot. The speed of pistol's sound is 334 m/s -it is constant and wil not change. a. How long did it take for Tom's ball to reach the ground? b. How far away was Jerry standing?
a. The time it takes for the ball to reach the ground is calculated using the equation
t = d/v
Where t is time, d is the distance the ball has to travel, and v is the speed of the sound.
In this case, d = 2.3 meters and v = 334 m/s
Therefore, t = 2.3/334 = 0.0069 seconds.
b. The distance Jerry was standing away from the window is equal to the speed of sound multiplied by the time it took for the ball to reach the ground.
d = vt
Therefore, d = (334 m/s)(0.0069 s) = 2.3 meters.
Therefore, Jerry was standing 2.3 meters away from the window.
Now consider the children's linear accelerations. Which of the following statements are correct? Check all that apply. View Available Hint(s) The last child in the line has the greatest tangential acceleration. The last child in the line has the greatest radial acceleration. All the children have the same tangential acceleration. All the children have the same radial acceleration. Submit
The last child in the line has the greatest tangential acceleration and the last child in the line has the greatest radial acceleration are correct statements.
What is accelaration?Acceleration is the rate of change of velocity over time. It is the rate at which an object's speed, direction, or both change. It can also be defined mathematically as the derivative of the velocity vector with respect to time. Acceleration is a vector quantity, meaning that it has both magnitude and direction. It is typically expressed in units of meters per second squared (m/s2).
All the children do not have the same tangential and radial accelerations as the accelerations depend on the position of the children in the line.
To know more about acceleration click-
https://brainly.com/question/605631
#SPJ4
A bowling ball has a mass of 25 kg and a velocity of 20 m/s. A marble has a
mass of 5 kg and a velocity of 50 m/s. Which has greater momentum?
The momentum of the bowling ball is 500kgm/s and that of the marble is 250kgm/s. Therefore, the momentum of bowling ball is greater than that of marble.
What is Momentum?Momentum is the product of the mass and velocity of an object. It is a quantity of motion of an object. It is a vector quantity because it possess both the magnitude and the direction. The SI unit of momentum is kgm/s.
p = m × v
where, p = momentum of the object,
m = mass of the object,
v = velocity of the object.
The momentum of the bowling ball with a mass of 25kg and a velocity of 20m/s is:
p = 25 × 20 = 500kgm/s
The momentum of the marble with a mass of 5kg and velocity of 50m/s is:
p = 5 × 50 = 250kgm/s.
Therefore, the momentum of the bowling ball is more than the momentum of the marble.
Learn more about Momentum here:
https://brainly.com/question/24030570
#SPJ2
the unit system used by scientists, which is based on the metric system, is called the .
Answer:
Explanation: The metric system is a system of measurement that uses the meter, liter, and gram as base units of length (distance), capacity (volume), and weight (mass)
si units which are used by scientist to measure
what torque is required to bring a wheel that has a moment of inertia of 8.0 kg m2 to rest in 4.0 s if initially it has 155 joules of rotational kinetic energy? group of answer choices -12 n m -16 n m -18 n m -10 n m
12.44 N torque will be required to bring a wheel.
Given information:
moment of inertia I = 8.0kg m²
kinetic energy = 155 joule
To find angular velocity
KE = 1/2 * Iω
ω = 6.2248 rad/s
Now through the kinematic equations of angular movement we will find the value of the angular acceleration, since this is equivalent to the change of the angular velocity in a certain time.
α = Δω/Δt
α = 1.5562 rad/s²
Finally, Torque's definition tells us that this is equivalent to the product between the moment of inertia and angular acceleration, therefore,
r = Iα (r = torque)
r = 12.44 Nm.
Learn more about torque visit:
brainly.com/question/29363419
#SPJ4
1. If the dielectric becomes damaged it can 'break down' like the air does when lightning strikes. What would happen to the charge on the plates?
2. Here are some statements about how an image is produced and processed in a digital camera.
A) Starting in one corner the charge on each square is moved off the CCD.
B) Light enters the camera.
C) That signal can be stored or sent to a computer or other device.
D) The charges on each square are converted into a digital signal.
E) When the light hits a square on the CCD charge is produced.
a. They are in the wrong order. Write the letters for the statements in the correct order.
b. Explain why there is a delay between taking one photograph with a digital camera and taking the next photograph.
Answer:
Explanation:
A) E) When the light hits a square on the CCD charge is produced
B) A) Starting in one corner the charge on each square is moved off the CCD
C) D) The charges on each square are converted into a digital signal
D) B) Light enters the camera
E) C) That signal can be stored or sent to a computer or other device
b. The delay between taking one photograph with a digital camera and taking the next photograph is due to the time it takes to capture the image and process it into a digital signal. This process includes the capturing of the light entering the camera, the conversion of the charges on each square of the CCD into a digital signal, and the storage or sending of the signal to a computer or other device.
if a total force exerted by water in a container with a bottom area of 2 square meters is 450 newtons, what's the water
If the total force applied by water in a vessel with a bottom area of 2 square meters is 450 newtons, then the water pressure at the bottom of the vessel would be 225 Pascals.
What's pressure?The total actionable force per unit of area is known as the pressure.
The pressure depends both on externally applied force as well the area on which it's applied.
The fine expression for the pressure
Pressure = Force/ Area
the pressure is expressed by the unit pascal or N/ m ²
There's a difference between the pressure and the stress in the material although both have the same fine expression.
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ4
a 0.15 m radius wheel starts from rest and attains an angular speed of 12 rad/s in 4 seconds. find the angular acceleration of the wheel.
At 21.6 m/s2, the wheel is speeding up angularly. In the case of a wheel with a radius of 0.15 m, the wheel starts out at rest and after 4 seconds, it has reached an angular speed of 12 rad/s.
In physics, angular acceleration refers to how quickly angular velocity changes over time. Since spin angular velocity and orbital angular velocity are two different forms of angular velocity, respectively, there are two different types of angular acceleration. Spin angular acceleration and orbital angular acceleration are the names for these. Angular speed is defined as the pace at which the angular displacement changes. Angular speed is measured in radian per second. The same equation can be used to define both angle speed and angle velocity.
angular acceleration = (12*12)*0.15 = 21.6 m/s^2
Learn more about speed here
https://brainly.com/question/28224010
#SPJ4
uniform circular motion worksheet physics 
The time of motion of the satellite is 1.65 hours.
The speed of the satellite from the center of the Earth is 26,945.35 km/h.
What is the time of motion of the satellite?
The time of motion of the satellite in hours is calculated as follows;
t = ( 99 min / 1 ) x ( 1 hour / 60 min )
t = 1.65 hours
The speed of the satellite from the center of the Earth in km/h is calculated as follows;
v = ( 2πr ) / ( t )
where;
r is the distance of the satellite from the center of the EarthThe position of the satellite above the surface of the Earth = 705 km
The radius of Earth = 6,371 km
The total distance of the satellite from the center of the Earth = 705 km + 6,371 km = 7,076 km
v = ( 2π x 7076 ) / ( 1.65 )
v = 26,945.35 km/h
Learn more about speed of satellite here: https://brainly.com/question/28106901
#SPJ1
a 1500 kg car accelerates from rest to 75 km/hr in 45 seconds. how much power is supplied by the engine to acclerate the car
The engine provides power to accelerate the car at a rate of 75 * 1,000 / 60 = 7500 / 6 = 1250 metric tonnes / sec (power = m* v / t).
What does "accelerate swiftly" mean?Things move more quickly when their rate, process, or other characteristics accelerate.It gets faster if the rate of anything accelerates or something accelerates it. The pace of growth will increase to 2.9% the following year.
Whatever happens when you speed up excessively?Your transmission will deteriorate if you drive quicker since your motor will use more gasoline or diesel every mile. Furthermore, going so swiftly puts additional strain on your engine's tiny moving parts, which could hasten their wear-out.
To know more about accelerate visit:
https://brainly.com/question/907547
#SPJ4
Viewed from a distance, how would a flashing red light appear as it fell into a black hole?
A. It would appear to flash more quickly.
B. Its flashes would appear bluer.
C. Its flashes would shift to the infrared part of the spectrum.
The most accurate answer is D. As the red light falls into a black hole, its flashes would become progressively dimmer.
What is distance?Distance is a numerical measurement of how far apart two objects or points are. It can be measured in different units such as kilometers, miles, meters, or feet. Distance is an important concept in physics, mathematics, and many other scientific disciplines. It is also used in everyday life to determine how long it takes to travel to a certain destination. Distance can be measured in both two and three dimensions, and is a fundamental part of understanding the world around us.
This is because the light would be redshifted due to the immense gravitational force, causing it to move further and further away from the visible spectrum, and eventually become invisible. The other answers are incorrect because the light would not change color or flash more quickly, but instead, its intensity would diminish and the wavelength of the light would be extended.
To know more about distance click-
https://brainly.com/question/26550516
#SPJ4
Complete questions as follows-
Viewed from a distance, how would a flashing red light appear as it fell into a black hole?
A. It would appear to flash more quickly.
B. Its flashes would appear bluer.
C. Its flashes would shift to the infrared part of the spectrum.
D. Its flashes would become progressively dimmer.
what is the resistance of a parallel circuit with resistance's of 2 ohms, 4 ohms, 6 ohms, and 10 ohms ?
The resistance of a parallel circuit with resistances of 2 ohms, 4 ohms, 6 ohms, and 10 ohms is 1.75 ohms
The total resistance is calculated differently in a parallel circuit than in a series circuit. The formula to calculate the total resistance of a parallel circuit is:
1/Rt = 1/R1 + 1/R2 + 1/R3 + ...
Where Rt is the total resistance, and R1, R2, R3, etc. are the resistance values of the individual components in the circuit.
So, in a circuit with resistances of 2 ohms, 4 ohms, 6 ohms, and 10 ohms, the total resistance would be:
1/Rt = 1/2 + 1/4 + 1/6 + 1/10
Solving for Rt:
Rt = 1 / (1/2 + 1/4 + 1/6 + 1/10)
Rt = 1.75 ohms
Therefore, the total resistance of the parallel circuit with resistances of 2 ohms, 4 ohms, 6 ohms, and 10 ohms is 1.75 ohms
Learn more about the resistance of a parallel circuit here: https://brainly.com/question/24195447
#SPJ4
suppose you do 1000 j of work on a 5 kg object, and all the work went into lifting it above the ground. how high above the ground will the object be when all the work has been done?
Height should be above the ground is 2Om
What is Work Done?The three fundamental concepts in physics are power, energy, and work. A force (push or pull) is said to have accomplished work when it causes an object to move after being applied. We define the capacity to carry out the work in terms of energy. The amount of work finished in a specific length of time is known as power. The discussion of work, energy, and power is extensive on this page.
In order for labour to be accomplished, a force must be applied, and there must also be motion or displacement in the direction of the force. The work performed by a force acting on an object is defined as the force multiplied by the distance travelled in the force's direction. Work has no purpose and is only
P. E = mgh
when g= 10ms^-1
1000j = 5 × 10 × h
1000j = 50h
h = 1000 ÷ 50
h = 2Om
Learn more about Work Done from given link
brainly.com/question/25573309
#SPJ4
what is the normal force acting on a mountain goat that weighs 900 n and is standing on such a slope?
According to the question the vale of normal force acting is 450 N.
What in science is a force?At this level, calling a force a push or maybe even a pull is entirely appropriate.
We must resolve the mass perpendicular to a inclination in order to calculate the normal force. Consequently, we can write:
N = W CosΘ
= 900 N(Cos 60°)
= 900 N(0.5)
= 450 N
We must add together all the forces acting in conjunction with the inclination in order to calculate the static friction force. We compose:
F = W sinΘ
= 900 N(sin 60°)
= 900 N(0.8660254038)
= 779.42 N
To learn more about force visit:
https://brainly.com/question/13191643
#SPJ4
