A 1,269 kg rocket is traveling at 413 m/s with 2,660 kg of fuel on board. If the rocket fuel travels at 1,614 m/s relative to the rocket, what is the rockets final velocity after it uses half of its fuel?

Answer:

48 Nm

Explanation:

Moment, or torque, is the cross product of radius and force vectors.

τ = r × F

τ = (0.80 m) (60 N)

τ = 48 Nm

Answer:

Explanation:

If there is only 1 force, the body can never be in equilibrium, providing that the force is not zero (and that would hardly be a force. Zero is possible in math and it means something. It is debatable in physics).

You cannot think of a condition where something is stationary on planet earth and there are not 2 forces or more forces involved.

Think of something like a block of wood sitting on a table. It is not moving, we'll say. Gravity is holding it down, but what is pushing up on it?

The table is. There are 2 forces and they are equal in magnitude, but opposite in direction. That matters.

Answer:

(A) object B has the largest mass because it has the least acceleration

(B) object C has the smallest mass because it has the largest acceleration

(C) mass A : mass B = 3 : 5

Explanation:

Given;

acceleration of object A = 5 m/s²

acceleration of object B = 3 m/s²

acceleration of object C = 7 m/s²

A constant force, F

According to Newton's second law of motion;

F = ma

m = F / a

Mass of object A:

m = F / 5

Mass of object B:

m = F / 3

Mass of object  C:

m = F / 7

(A). Which object has the largest mass:

object B has the largest mass because it has the least acceleration

(B). Which object has the smallest mass:

object C has the smallest mass because it has the largest acceleration

(C). What is the ratio of mass A to mass B;

mass A = F / 5

mass B = F / 3

[tex]mass \ A : \ mass \ B = \frac{F}{5} : \frac{F}{3} \\\\\frac{mass \ A}{mass \ B} = \frac{F}{5} * \frac{3}{F}= \frac{3}{5} \\\\mass \ A : \ mass \ B = 3: 5[/tex]

A. The Object B has largest mass.

B. The Object A has smallest mass.

C. The ratio of mass A to mass B is, [tex]\frac{3}{5}[/tex]

The second law states that the acceleration of an object is dependent upon two variables - the net force acting upon the object and the mass of the object.

                   [tex]F=ma\\\\m=\frac{F}{a}[/tex]

                     [tex]\frac{m_{A}}{m_{B}} =\frac{a_{B}}{a_{A}} =\frac{3}{5}[/tex]

Learn more about the acceleration of object here:

https://brainly.com/question/460763

Answer:

5.4×10⁶J

Explanation:

1 cal = 4.184 J

1.3×10⁶ cal × (4.184 J/cal) = 5.4×10⁶J

Answer:

N = 243.596 N ≈ 243.6 N

Explanation:

mass of person = 69 kg ( M )

mass of aluminium ladder = 11 kg ( m )

length of ladder = 6.4 m ( l )

base of ladder = 2 m from the house (d )

center of mass of ladder = 2 m from the bottom of ladder

person on ladder standing = 3 m from bottom of ladder

Calculate the magnitudes of the forces at the top and bottom of the ladder

The net torque on the ladder = o ( since it is at equilibrium )

assuming: the weight of the person( mg) acting at a distance x along the ladder. the weight of the ladder ( mg) acting halfway along the ladder and the reaction N acting on top of the ladder

X = l/2

x = 6.4 / 2 = 3.2

find angle formed by the ladder

cos ∅ = d/l

    ∅ = [tex]cos^{-1][/tex] 2/6.4 = [tex]cos^{-1}[/tex]0.3125  ≈ 71.79⁰

remember the net torque around is = zero

to calculate the magnitude of forces on the ladder we apply the following formula

[tex]N = \frac{mg(dcosteta)+ Mgxcosteta}{lsinteta}[/tex]

m = 11 kg, M = 69 kg, l = 6.4 , x = 3,  teta( ∅ )= 71.79⁰, g = 9.8

back to equation  N = [tex]\frac{11*9.8(2*cos71.79)+ 69*9.8*3* cos71.79}{6.4sin71.79}[/tex]

N = (67.375 + 633.938) / 2.879

N = 243.596 N ≈ 243.6 N

Answer:

B. 9.4 s

Explanation:

In order to calculate the total time taken by the ball to hit the ground, we first analyze the upward motion. We will use subscript 1 for upward motion. Now, using 1st equation of motion:

Vf₁ = Vi₁ + gt₁

where,

Vf, = Final Velocity in upward motion = 0 m/s (ball stops at highest point)

Vi = Initial Velocity in upward motion = 36.2 m/s

g = - 9.8 m/s² (negative due to upward motion)

t₁ = Time taken in upward motion = ?

Therefore,

0 m/s = 36.2 m/s + (-9.8 m/s²)(t₁)

t₁ = (36.2 m/s)/(9.8 m/s²)

t₁ = 3.7 s

Now, using 2nd equation of motion:

h₁ = (Vi₁)(t₁) + (0.5)(g)(t₁)²

where,

h₁ = distance from top of building to highest point ball reaches = ?

Therefore,

h₁ = (36.2 m/s)(3.7 s) + (0.5)(-9.8 m/s²)(3.7 s)²

h₁ = 133.58 - 66.86 m

h₁ = 66.72 m

No, considering downward motion and using subscript 2, for it.

Using 2nd equation of motion:

h₂ = (Vi₂)(t₂) + (0.5)(g)(t₂)²

where,

h₂ = height of the highest point from ground = h₁ + height of building

h₂ = 66.72 m + 90 m = 156.72 m

Vi₂ = Initial Speed during downward motion = 0 m/s (ball stops for a moment at highest point)

t₂ = Time Taken in downward motion = ?

g = 9.8 m/s²

Therefore,

156.72 m = (0 m/s)(t₂) + (0.5)(9.8 m/s²)(t₂)²

t₂² = (156.72 m)/(4.9 m/s²)

t₂ = √31.98 s²

t₂ = 5.7 s

Now, the total time taken by ball to reach the ground is"

Total Time = T = t₁ + t₂

T = 3.7 s + 5.7 s

T = 9.4 s

Therefore, the correct answer is:

B. 9.4 s

Answer:

16kg m/s

Explanation:

P=mv

8 times 2=16kg m/s

Answer:

The momentum of moving body is calculated by

p= mv

In this question m= 8kg

v= 2m/s

so p = 8*2 = 16 kg m/s.

"Mass in motion" can be used to describe momentum. Mass exists in all things. Therefore, if an object is moving, it has momentum—its mass is moving. There are two factors that determine an object's momentum level: how much and how quickly the objects are moving.

Mass and velocity are two variables that affect momentum. An object's momentum can be expressed mathematically as the product of its mass multiply by its velocity.

The equation above can be rewritten as p = m • v, where m is the mass and v is the velocity, since momentum is represented by the lower case p in physics. The equation demonstrates that an object's momentum is directly proportional to its mass and velocity.

The quantity momentum is a vector. A vector quantity is a quantity that is fully described by magnitude and direction, as was discussed in a previous unit. Information about the bowling ball's magnitude as well as its direction must be included in order to fully describe the momentum of a 5-kg ball traveling westward at 2 m/s. The ball has a momentum of 10 kg m/s.

Until information about the ball's direction is provided, the ball's momentum cannot be fully described. The direction of the ball's velocity and the direction of the momentum vector are identical. It was mentioned in a previous unit that the velocity vector moves in the same way that an object moves. The bowling ball's momentum can be fully described as 10 kg m/s westward if it is moving westward. The magnitude and direction of an object's momentum can be used to fully describe it as a vector quantity.

For more details about momentum check these:

brainly.com/question/12098941

#SPJ2

Answer:

Explanation:

Let the plastic rod extends from - L to + L .

consider a small length of dx on the rod on the positive x axis at distance x . charge on it =  λ dx where  λ is linear charge density .

It will create a field at point P on y -axis . Distance of point P

= √ x² + .15²

electric field at P due to small charged length

dE = k λ dx x  / (x² + .15² )

Its component along Y - axis

= dE cosθ where θ is angle between direction of field dE and y axis

= dE x .15 / √ x² + .15²

=  k λ dx  .15 / (x² + .15² )³/²

If we consider the same strip along the x axis at the same position  on negative x axis , same result will be found . It is to be noted that the component of field in perpendicular to y axis will cancel out each other . Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L

E = ∫  k λ  .15  / (x² + .15² )³/² dx

=  k λ  x L / .15 √( L² / 4 + .15² )

b) The length of the rod:

[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )[/tex]

Given:

d = 1.5 mλ = 2.5 nC/m

Let the plastic rod extends from - L to + L .Consider a small length of dx on the rod on the positive x axis at distance x . charge on it = λ dx where λ is linear charge density .It will create a field at point P on y -axis.

Distance of point P =[tex]\sqrt{x^2 + 0.15^2}[/tex]

E.F at P due to small charged length[tex]dE = \frac{ k \lambda x.dx}{(x^2 + .15^2 )}[/tex]

Its component along Y - axis = dE cosθ where θ is angle between direction of field dE and y axis

[tex]= \frac{dE x .15 }{\sqrt{x^2 + .15^2} }\\\\= \frac{k \lambda dx .15}{(x^2 + .15^2 )^{1/2}}[/tex]

If we consider the same strip along the x axis at the same position on negative x axis , same result will be found . We can say that the component of field in perpendicular to y axis will cancel out each other.

Now for electric field due to whole rod at point p , we shall have to integrate the above expression from - L to + L

[tex]E = \int\limits dx . k \lambda .15 / (x^2 + .15^2 )^{1/2} dx\\\\E= \frac{k \lambda * L}{0.15} \sqrt{( L^2 / 4 + .15^2 )}[/tex]

Find more information about Electric field here:

brainly.com/question/14372859

Answer:

Explanation:

During slowing down , initial angular velocity ω₁ = 22 rad /s

final angular velocity ω₂ = 13.5 rad /s

using the law's of motion formula for rotation

ω₂² =  ω₁² + 2 αθ  , α is angular acceleration and θ is angle in radian rotated during this period

13.5² = 22² - 2xα x 13.8

2xα x 13.8 = 484 - 182.25

α  =  10.93 rad / s²

Answer:

The frequency of the sound you will hear is 713.85 Hz

Explanation:

Given;

speed of your car, [tex]v_s[/tex] = 85.0 km/h

frequency of the siren, f = 665 Hz

Speed of sound in air, v = 345 m/s

The frequency of the sound you hear, can be calculated as;

[tex]f' = f(\frac{v}{v-v_s})[/tex]

Convert the speed of the car to m/s

[tex]85 \ km/h =\frac{85 \ km}{h} (\frac{1000\ m}{1 \ km})(\frac{1 \ h}{3600 \ s} ) = 23.61 \ m/s[/tex]

[tex]f' = f(\frac{v}{v-v_s} )\\\\f' = 665(\frac{345}{345-23.61} )\\\\f' = 665 (1.07346)\\\\f' = 713.85 \ Hz[/tex]

Therefore, the frequency of the sound you will hear is 713.85 Hz

Answer:

0.002kg and 0.01cm

Explanation:

500 leaves has a thickness is 5cm

Means I leaf has a thickness of 5/500= 0.01cm

Similarly the mass of one leaf would be 1/500 =0.002kg

Answer:

Salt

Explanation:

Salt plays a crucial role in maintaining human health. It is the main source of sodium and chloride ions in the human diet. Sodium is essential for the nerve and muscle function and is involved in the regulation of fluids in the body. Sodium also plays a role in the body's control of blood pressure and volume. Salt is harvested by seawater or brine is fed into large ponds of water and is drawn out through natural evaporation which allows the salt to be subsequently harvested.

Have a good day and stay safe!

Answer:

20 Yards

Explanation:

|---20----|

|            |

| 50       |50

|---D--->|

Start      End

Total displacement(D)  20 yards (East).

Answer:

The time taken is  [tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]

Explanation:

From the question we are told that

     The speed of the current is  [tex]v__{R}}[/tex]

     The speed of the swimmer in direction of current is [tex]v__{S}}[/tex]

      The distance traveled by the swimmer is  [tex]D[/tex]

       The time taken to travel this distance is  [tex]t_{out}[/tex]

      The speed of the swimmer against  direction of current is  [tex]v__{s}}[/tex]

The resultant speed for downstream current is

       [tex]V_{r} = v__{S}} +v__{R}}[/tex]

The time taken can be mathematically represented as

      [tex]t_{out} = \frac{D}{V_{r}}[/tex]

      [tex]t_{out} = \frac{D}{v__{R}} + v__{S}}}[/tex]

Answer:

a. 78 degree

Explanation:

According to Snell's Law, we have:

(ni)(Sin θi) = (nr)(Sin θr)

where,

ni = Refractive index of medium on which light is incident

ni = Refractive index of ethyl alcohol = 1.361

nr = Refractive index of medium from which light is refracted

nr = Refractive index of ethyl alcohol = 1.333

θi = Angle of Incidence

θr = Angle of refraction

So, the Angle of Incidence is know as the Critical Angle (θc), when the refracted angle becomes 90°. This is the case of total internal reflection. That is:

θi = θc

when, θr = 90°

Therefore, Snell's Law becomes:

(1.361)(Sin θc) = (1.333)(Sin 90°)

Sin θc = 1.333/1.361

θc = Sin⁻¹ (0.9794)

θc = 78.35° = 78° (Approximately)

Therefore, correct answer will be:

a. 78 degree

The angle relative to the normal interface of the two liquids at which the light is totally reflected is 78 degrees.

From the information given;

According to Snell's Law of refraction;

[tex]\mathbf{n_1 sin \theta _c = n_2 sin \theta_r}[/tex]

[tex]\mathbf{1.361 \times sin \theta _c = 1.333 \times sin 90}[/tex]

[tex]\mathbf{ sin \theta _c =\dfrac{ 1.333 \times sin 90}{1.361}}[/tex]

[tex]\mathbf{ sin \theta _c =\dfrac{ 1.333 \times 1}{1.361}}[/tex]

[tex]\mathbf{ \theta _c = sin^{-1} (0.9794)}[/tex]

[tex]\mathbf{ \theta _c =78.35^0}[/tex]

[tex]\mathbf{ \theta _c \simeq78^0}[/tex]

Therefore, we can conclude that the angle relative to the normal interface of the two liquids at which the light is totally reflected is 78 degrees.

Learn more about Snell Law of refraction here:

https://brainly.com/question/14029329?referrer=searchResults

Answer:

The value of F= - 830 N

Since the force is negative, it implies direction of the force applied was due south.

Explanation:

Given data:

Mass = 1000-kg

Distance, d = 240 m

Initial velocity, v1 = 20.0 m/s

Final velocity, v2 = 0 (since the car came to rest after brake was applied)

v2²= v1² + 2ad (using one of the equation of motion)

0=  20² + (2 x a x  240)

0= 400 + 480 a

a = - 400/480

a = - 0.83 m/s²

Then, imputing the value of a into

F = ma

F = 1000 kg x ( - 0.83 m/s²)

F= - 830 N

The car was driving toward the north, and since the force is negative, it implies direction of the force applied was due south.

Answer:

15N

Explanation:

F=ma

m=1500g = 1.5kg

a=10m/s2

1.5×10=15 N

Answer:15000gms^-2

Explanation:

F=m×a

m=1500g, a=10ms^-2

F=(1500×10)gms^-2

F=15000gms^-2

Answer:

Explanation:

Distance between fringe or fringe width =  xλ /  d

where x is location of screen and d is slit separation

Given x = 4 m

λ = 694 nm

d = .085 x 10⁻³ m

distance between fringes

= 4 x 694 x 10⁻⁹ / .085 x 10⁻³

= 4 x 694 x 10⁻⁹ / 85 x 10⁻⁶

= 32.66 x 10⁻³ m

= 32.66 mm .

3.267 cm

b )

when submerged in water , wavelength in water becomes as follows

wavelength in water = wave length / refractive index

= 694 / 1.333 nm

= 520.63 nm

new distance between fringes

3.267 / 1.333

= 2.45 cm .

Answer:

J = 0.800 kg m/s

Fmax = 291 N

Explanation:

During the fall, energy is conserved.

PE = KE

mgh = ½ mv²

v = √(2gh)

v = √(2 × 9.81 m/s² × 1.45 m)

v = 5.33 m/s

Alternatively, you can use kinematics to find the velocity.

Impulse = change in momentum

J = Δp

J = mΔv

J = (0.150 kg) (5.33 m/s)

J = 0.800 kg m/s

Impulse = area under F vs t graph

J = ∫ F dt

J = ½ Fmax Δt

(0.800 kg m/s) = ½ Fmax (0.0055 ms)

Fmax = 291 N

Answer:

The  normal force N1 exerted by the floor is  [tex]N_1 = 951 \ N[/tex]

The  normal force N2 exerted by the wall is  [tex]N_2= 616.43 \ N[/tex]

The frictional force exerted by the wall is  [tex]f = N_2 = 616.43 \ N[/tex]  

Explanation:

From the question we are told that

    The length of the ladder is  [tex]L = 4.6 \ m[/tex]

    The weight of the ladder  is

    The distance of the ladder position on the wall from the floor is  [tex]D = 3.75 \ m[/tex]

     The mass of the person is  [tex]m = 90 kg[/tex]

Applying Pythagoras theorem

The length of the position the ladder on the ground from the base of the wall is

    [tex]A = \sqrt{L^ 2 - D^2}[/tex]

substituting values

    [tex]A = \sqrt{(4.6^2)-(3.75^2)}[/tex]

    [tex]A = 2.66 \ m[/tex]

  In order the for the ladder not to shift from the ground the sum of the moment about the position of the ladder on the ground must be equal to zero this is mathematically represented as

        [tex]\sum M = 0 = N_2 * D - [\frac{1}{2} * W_L ] * [(mg) *A ][/tex]

         [tex]\sum M = 0 = N_2 * 3.75 - [\frac{1}{2} * 69.0 ] * [(90*9.8) * \frac{4.6}{2.66} ][/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2 * 3.75 =2311.62[/tex]

        [tex]N_2= 616.43 \ N[/tex]

Now the force exerted by the floor on the ladder is mathematically represented as

           [tex]N_1 = W_L + (m * g )[/tex]

substituting values

          [tex]N_1 = 951 \ N[/tex]

Now the horizontal forces acting on the ladder are [tex]N_2 \ and \ f[/tex] and they are in opposite direction so

     [tex]f = N_2 = 616.43 \ N[/tex]  

Answer:

11,700Newton

Explanation:

According to Newton's second law, Force = mass × acceleration

Given mass = 65kg.

Acceleration if the car can be gotten using one of the equation of motion as shown.

v² = u²+2as

v is the final velocity = 18m/s

u is the initial velocity = 0m/s

a is the acceleration

s is the distance travelled = 0.9m

On substitution;

18² = 0²+2a(0.9)

18² = 1.8a

a = 324/1.8

a = 180m/²

Net force acting on the body = 65×180

Net force acting on the body = 11,700Newton

Let [tex]\theta[/tex], [tex]\omega[/tex], and [tex]\alpha[/tex] denote the angular displacement, velocity, and acceleration of the wheel, respectively.

(A) The wheel has angular velocity at time [tex]t[/tex] according to

[tex]\omega=\omega_0+\alpha t[/tex]

so that after 2.50 s, the wheel will have attained an angular velocity of

[tex]\omega=1.10\dfrac{\rm rad}{\rm s}+\left(0.200\dfrac{\rm rad}{\mathrm s^2}\right)(2.50\,\mathrm s)=\boxed{1.60\dfrac{\rm rad}{\rm s}}[/tex]

(B) The angular displacement of the wheel is given by

[tex]\theta=\theta_0+\omega_0t+\dfrac\alpha2t^2\implies\Delta\theta=\omega_0t+\dfrac\alpha2t^2[/tex]

After 2.50 s, the wheel will have turned an angle [tex]\Delta\theta[/tex] equal to

[tex]\Delta\theta=\left(1.10\dfrac{\rm rad}{\rm s}\right)(2.50\,\mathrm s)+\dfrac12\left(0.200\dfrac{\rm ram}{\mathrm s^2}\right)(2.50\,\mathrm s)^2=\boxed{3.38\,\mathrm{rad}}[/tex]

Answer:

The work done by the force is  5.76 J

Explanation:

Given;

mass of canister , m = 3.2 kg

magnitude of force, f = 6.7 N

initial velocity of the canister on x-axis,  [tex]v_i[/tex]= 3.3i m/s

final velocity of the canister on y- axis, [tex]v_f[/tex] = 6.9j m/s

The work done on the canister = change in the kinetic energy of the canister

[tex]W = K.E_f - K.E_i[/tex]

where;

K.Ei is the initial kinetic energy

K.Ef is the final kinetic energy

The initial kinetic energy:

[tex]K.E_i = \frac{1}{2} *m\sqrt{i^2 +j^2+z^2}\\\\K.E_i = \frac{1}{2} *3.2\sqrt{3.3^2 +0^2+0^2}\\\\K.E_i = 5.28 \ J[/tex]

The final kinetic energy:

[tex]K.E_f = \frac{1}{2} *m\sqrt{i^2 +j^2+z^2}\\\\K.E_f = \frac{1}{2} *3.2\sqrt{0^2 +6.9^2+0^2}\\\\K.E_f = 11.04 \ J\\[/tex]

W = 11.04 - 5.28

W = 5.76 J

Therefore, work done on the canister by the 6.7 N force during this time is 5.76 J

Answer:

the angular speed of the person increases, being able to make more turns and faster.

 K₂ = K₁ I₁ / I₂

Explanation:

When the divers are turning the system is isolated, so all the forces are internal and therefore also the torque, therefore the angular momentum is conserved

initial, joint when starting to turn

         L₀ = I₁ w₁

final. When you shrink your arms and legs

         Lf = I₂ w₂

         L₀ = Lf

         I₁ w₁ = I₂ w₂

when you shrink your arms and legs the distance to the turning point decreases and since the moment of inertia depends on the distance squared, the moment of inertia also decreases

      I₂ <I₁

         w₂ = I₁ / I₂ w₁

therefore the angular speed of the person increases, being able to make more turns and faster.

When it goes into the water it straightens the arm and leg, so the moment of inertia increases

          I₁> I₂

           w₁ = I₂ / I₁ w₂

therefore we see that the angular velocity decreases, therefore the person trains the water like a stone and can go deeper faster.

In both cases the kinetic energy is

          K = ½ I w²

the initial kinetic energy is

          K₁ = ½ I₁ w₁²

the final kinetic energy is

          K₂ = ½ I₂ w₂²

we substitute

          K₂ = ½ I₂ (I₁ / I₂ w1² 2

          K₂ = ½ I₁² / I₂ w₁² = (½ I₁ w₁²)  I₁ / I₂  

          K₂ = K₁ I₁ / I₂

therefore we see that the kinetic energy increases by factor I₁/I₂

Answer:

To things that are positive charged

Answer:

(a) 498.6 Hz

(b) 534.6 Hz

Explanation: Please see the attachments below

Answer:

F = 423.63 N

Explanation:

Since, the x-component and y-components of the acceleration of ball are given. Therefore, we need to find the resultant or net acceleration of the soccer ball first. For that purpose we use to the formula for the resultant of rectangular components of a vector:

a = √(ax² + ay²)

where,

a = net acceleration = ?

ax = x - component of acceleration = 950 m/s²

ay = y - component of acceleration = 750 m/s²

Therefore,

a = √[(950 m/s²)² + (750 m/s²)²]

a = 1210.4 m/s²

Now, from Newton's Second Law, we know that:

F = ma

where,

m = mass of ball = 0.35 kg

F = Net force acting on ball = ?

F = (0.35 kg)(1210.4 m/s²)

F = 423.63 N

Answer:

0.00000009512

Explanation:

Scientific notation is a very useful and abbreviated way of writing quantities that are very large or small. It consists of placing the number with an integer and multiplying by an exponent to arrive at the same number.

let's pass the number 9,512 10⁻⁸ to decimal notation

       9,512 / 10⁸ = 9,512 / 100000000

        0.00000009512

As we see writing this number, it is very easy to make mistakes

Answer:

1)copper wire

Explanation:

it is the best electric conductor

Answer:

a) v = -12t + 64

b) t = 5.33s

c) s = 362.66ft

d) t = 13.10s

e) v = 93.2ft/s

Explanation:

You have the following equation for the height of a stone thrown in Mars:

[tex]s(t)=-6t^2+64t+192[/tex]       (1)

a)  The velocity of the stone after t seconds is obtained with the derivative of s in time:

[tex]v=\frac{ds}{st}=-12t+64[/tex]   (2)

The equation for the speed of the stone is v = -12t + 64

b) The highest point is obtained when the speed of the stone is zero. Then, from the equation (2) equal to zero, you can obtain the time when the stone is at its maximum height:

[tex]-12t+64=0\\\\t=5.33s[/tex]

The time in which the stone is at the maximum height is 5.33s

c) For this time the stone is at the maximum height. Then, you replace t in the equation (1):

[tex]s(1)=-6(5.33)^2+64(5.33)+192=362.66ft[/tex]

the maximum height is 362.66 ft

d) To find the time when the stone arrive to the ground you equal the equation (1) to zero and you solve for t:

[tex]0=-6t^2+64t+192[/tex]

you use the quadratic formula:

[tex]t_{1,2}=\frac{-64\pm\sqrt{64^2-4(-6)(192)}}{2(-6)}\\\\t_{1,2}=\frac{-64\pm 93.29}{-12}\\\\t_1=13.10s\\\\t_2=-2.44s[/tex]

You use the result with positive values because is the onlyone with physical meaning.

The time for the stone hits the ground is 13.10 s

e) You replace 13.10s in the equation (2) to obtain the velocity of the stone when it strike the ground:

[tex]v=-12t+64=-12(13.10)+64=-93.2\frac{ft}{s}[/tex]

The minus sign is because the stone's direction is downward.

The speed of the stone just when it strikes the ground is 93.2ft/s