Answer:
eheheehehehszndn!jejxxnndrrjrrrfufurururufjththjrjrjdjjjrj\u\ujrjeejrjjjj carbon
7 on the pH scale represents what?
Answer:
seven on the ph scale is the neutral point
Explanation:
The range goes from 0 - 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.
6.0 mol NaOH reacts with
9.0 mol H3PO4 according to
the equation below:
3NaOH + H3PO4 → 3H₂O + Na3PO4
How many moles of Na3PO4 form from
6.0 mol NaOH?
[?] mol Na3PO4
Round your answer to the tenths place.
2 moles of Na3PO4 form from 6.0 mol NaOH. Details about stoichiometry can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows:
3NaOH + H3PO4 → 3H₂O + Na3PO4
According to this equation,
3 moles of NaOH produces 1 mole of Na3PO4
This means that 6 moles of NaOH will produce 6/3 = 2 moles of Na3PO4
Therefore, 2 moles of Na3PO4 form from 6.0 mol NaOH.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
An arrow is fired at a target on a high wall. How does the energy change between the moment the arrow is fired and the moment it hits the target?
o The potential energy and kinetic energy remain the same.
o The potential energy decreases as kinetic energy increases.
o The kinetic energy decreases as potential energy increases.
o The kinetic energy remains at zero, but potential energy increases.
The kinetic energy decreases as potential energy increases. Hence, option C is correct.
What is potential energy?Potential energy is stored energy that depends upon the relative position of various parts of a system.
As the target is fired high on the wall, the change in the energy that is observed as the arrow moves toward the target is kinetic energy starts to decrease as the arrow reaches nearer to the target and the potential energy is observed to increase.
So, in short, the energy transformation is from kinetic energy from a moving arrow to potential energy when the arrow hits the target.
Learn more about the potential energy here:
https://brainly.com/question/24284560
#SPJ1
2.3 moles of CaBr2 contains how many molecules
Avogadro's law states that in every mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] molecules.
This means that in 2.3 moles, there are [tex]2.3(6.022 \times 10^{23})=\boxed{1.4 \times 10^{24} \text{ (to 2 sf)}}[/tex]
CaCO3(s) CaO(s) + CO₂(g)
4
3.25 mol CaCO3 decomposes
according to the reaction above.
What volume of CO2 gas is
produced once the gas cools to
STP?
What mass of solute will dissolve in 100g of water at the following temperatures?
• KNO3 at 70°C =
• NaCl at 100°C=
• NH₂Cl at 90°C=
[tex]KNO_3[/tex] at 70°C = 130 gram
NaCl at 100°C= 40 gram
NH₂Cl at 90°C= 70 gram
What is solubility?Solubility is defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specified temperature.
Amount of a substance (called the solute) that dissolves in a unit volume of a liquid substance (called the solvent) to form a saturated solution under specified conditions of temperature and pressure. Solubility is expressed usually as moles of solute per 100 grams of solvent.
Hence,
[tex]KNO_3[/tex] at 70°C = 130 gram
NaCl at 100°C= 40 gram
NH₂Cl at 90°C= 70 gram
Learn more about solubility here:
https://brainly.com/question/14366471
#SPJ1
How a reaction between colorless substances can produce a colored precipitate
A reaction between colorless substances can produce a colored precipitate by formation of new ionic compound.
What is an ionic compound?An ionic compound is a compound that is made up of two elements, one metal and the other non metal, which are held together by an ionic bonding.
When reaction occurs between two colourless substances, colored precipitate results by formation of new ionic compound.
Learn more about chemical bonds here:
https://brainly.com/question/819068
#SPJ12
How many electrons are in a ion that has 16 protons and 59 neutrons if it has negative 2 charge?
How many grams Fe2O3 would be
required to make 187 g Fe?
Fe₂O3 + 3CO → 2Fe + 3CO₂
266.63g of Fe2O3 would be required to make 187 g Fe in accordance with the following equation: Fe₂O3 + 3CO → 2Fe + 3CO₂.
How to calculate mass?The mass of a product or reactant can be calculated using stoichiometry as follows:
According to this question, iron oxide reacts with carbon monoxide as follows:
Fe₂O3 + 3CO → 2Fe + 3CO₂
1 mole of Fe2O3 produces 2 moles of Fe
Moles of Fe = 187/56 = 3.34mol
3.34/2 = 1.67 moles of Fe2O3 will be required to produce 3.34 moles of Fe.
mass of Fe2O3 = 1.67 mol × 159.69 g/mol = 266.63g
Therefore, 266.63g of Fe2O3 would be required to make 187 g Fe in accordance with the following equation: Fe₂O3 + 3CO → 2Fe + 3CO₂.
Learn more about mass at: https://brainly.com/question/14122402
#SPJ1
An atom contains one proton, one electron, and one neutron. Which two particles are most similar in mass?
O the neutron and the electron
O the proton and the electron
O the proton and the neutron
O the neutron and the atom
Answer:
the pro on and the electron
What is lawn sand made up of and clay don’t copy straight off Cuz I can’t write the same thing it has
Answer:
?? what i dont understand
Pls tell me how to solve this!
Answer:
12 seconds
Explanation:
Time taken by 50cm³ of oxygen to diffuse from pinhole
= 1 minute = 60 seconds
⠀
⠀
[tex] \textsf{ Rate of oxygen} \sf (O_2) = \frac{50}{60} [/tex]
⠀
⠀
⠀
Let time taken by 50cm³ of hydrogen to diffuse from pinhole = t seconds
⠀
⠀
[tex] \textsf {Rate of hydrogen } \sf(H_2) = \frac{50}{t} [/tex]
⠀
⠀
⠀
According to the formula
[tex] \sf \frac{Rate \: of \: hydrogen(H_2)}{Rate \: of \: oxygen(O_2) } = \sqrt{ \frac{Molar \: mass \: of \: O_2}{Molar \: mass \: of \: H_2} } [/tex]
⠀
⠀
[tex] \large \sf \frac{50}{t} \div \frac{50}{60} = \sqrt{ \frac{\cancel{32}\small 16}{\cancel2} } \\ \\ \sf \large \frac{ \cancel{50}}{t} \times \frac{60}{ \cancel{50}} = \sqrt{16} \\ \\ \sf \large \frac{60}{t} = 4 \\ \\ \sf \large \frac{ \cancel{60} \: \small12}{ \cancel4} = t \\ \\ \large \underline{ \boxed{ \tt t = 12 \: seconds}}[/tex]
⠀
⠀
⠀
Henceforth, the time taken by 50cm³ of hydrogen to diffuse is 12 seconds.⠀
⠀
Thank you!You are trying to determine the
mass of sodium chloride required to
create a 0.875 m solution in 534 g of
water. How many moles of NaCl are
required?
Answer:
Answer:
Mass = 27.291 g
Explanation:
Given data:
Mass of sodium chloride = ?
Mass of water = 534 g
Molality = 0.875 m
Solution:
Molality:
It is the number of moles of solute into kilogram of solvent.
Formula:
Molality = number of moles of solute / kilogram solvent
Mathematical expression:
m = n/kg
Now we will convert the g into kg.
Mass of water = 534 g× 1kg/1000 g = 0.534 kg
Now we will put the values in formula.
0.875 m = n / 0.534 kg
n = 0.467 mol
Now we will calculate the mass of sodium chloride:
Mass = number of moles × molar mass
Mass = 0.467 mol × 58.44 g/mol
Mass = 27.291 g
30 points!!!! Answer fast
EXPERIMENT: MAGNETISM Bar Magnet
1. Place the bar magnet on a table.
2. Put a sheet of glass or plastic over the magnet.
3. Sprinkle the iron filings over the sheet evenly.
4. On a separate paper, sketch the magnet. Show the lines made by the iron filings. Horseshoe Magnet
5. Place a horseshoe magnet on the table.
6. Put a sheet of glass or plastic over the magnet.
7. Sprinkle the iron filings over the sheet.
8. On a separate paper, sketch the magnet. Show the lines made by the iron filings. N Pole to N Pole
9. Place two bar magnets N pole to N pole with an inch between them.
10. Put a piece of glass or plastic over the magnets.
11. Sprinkle the iron filings over the glass or plastic.
12. On a separate paper sketch the magnets. Show the lines made by the iron filings. N Pole to S Pole
13. Turn one of the bar magnets around so the magnets are N pole to S pole with an inch between.
14. Sprinkle the iron filings over the glass or plastic.
15. On a separate paper sketch the magnets. Show the lines made by the iron filings.
From the information you have observed, determine the following:
What rule of magnetism is illustrated by the lines of the iron filings in Step 12?
What rule of magnetism is illustrated by the lines of the iron filings in Step 15?
Why was glass or plastic used to separate the filings from the magnets in the experiments?
Did the glass or plastic stop the passage of the magnetic lines of force?
Did the iron filings almost or completely bridge the open end of the horseshoe magnet?
The magnetism is either created inside a given element by passing some number of charges,Q across it or it is due to the interaction with a permanent magnet.
What is Magnetism ?
A physical phenomenon produced by the motion of electric charge, which results in attractive and repulsive forces between objects.
The magnet consists the characteristics of having an optimum amount of energy (P.E inside it) inside it.
As, the energy lines are either directed outwards from the north pole of the magnet, the south pole of the magnet consumes or absorbs the magnetic rays(energy lines) originated from the north pole of the magnet.
The right hand rule of magnetism is illustrated in the 12 point of the question.Learn more about magnetism here ;
https://brainly.com/question/2841288
#SPJ1
An electron moved from shell n = 2 to shell n = 1. What most likely happened during the transition? (4 points)
A fraction of a photon was added.
A photon of energy was absorbed.
A fraction of a photon was removed.
A photon of energy was released.
can a chemical reaction take place without enzyme
Answer:
Theoretically, Yes (See the explanation)
Explanation:
The body has enzymes that catalyze processes, as several other respondents have mentioned. I haven't noticed any comments, but the reverse impact might be just as significant. Some enzymes are reaction inhibitors. Others operate as both catalysts and inhibitors, depending on the amounts of the reactants and reaction products close to the catalyst. I'll provide an illustration to demonstrate how crucial inhibition may be. Let's say you consume three banana splits one after the other. That is a large number of calories. You would have a very high temperature and be so energetic and full of energy that you would be bouncing off the walls if all those calories were converted simultaneously into energy and heat. But neither you nor I have ever heard of overeating creating a high temperature or anxiety. This is due to the fact that many of the high energy molecules produced by the process hinder the enzymes that regulate metabolism, which produces the energy needed to power your body and generate heat. In other words, if you don't require high energy, your body won't keep making it. When there are huge amounts of carbohydrates around, the enzymes that turn the carbohydrates you consumed into glycogen and fat (to store the extra energy you don't need right now) become catalytic (mostly glucose). Therefore, the /majority of the energy from those three banana splits will be stored as fat and glycogen as it won't be needed. And that occurs as a result of the reaction to turn the sugars into energy being blocked by the lack of a demand for the energy at the time. Both enzymes that act as catalysts and those that act as inhibitors are essential to the healthy operation of our bodies.
________________________________________________________
Definitions:
Enzymes: Any of various proteins, as pepsin, originating from living cells and capable of producing certain chemical changes in organic substances by catalytic action, as in digestion.
Metabolism: The sum of physical and chemical processes in an organism by which its material substance is produced, maintained, and destroyed, and by which energy is made available.
Glucose: A sugar, C6H12O6, having several optically different forms, the common dextrorotatory form (dextroglucose, or -glucose) occurring in many fruits , animal tissues and fluids, etc., and having a sweetness about one half that of ordinary sugar, and the rare levorotary form (lavoglucose, or -glucose) not naturally occurring.
Chemical reaction: Reaction, the reciprocal action of chemical agents upon each other; chemical change.
Protein: Any of numerous, highly varied organic molecules constituting a large portion of the mass of every life form and necessary in the diet of all animals and other nonphotosynthesizing organisms, composed of 20 or more amino acids linked in a genetically controlled linear sequence into one or more long polypeptide chains, the final shape and other properties of each protein being determined by the side chains of the amino acids and there chemical attachments: proteins include such specialized forms as collagen for supportive tissue, hemoglobin for transport, antibodies for immune defense, and enzymes for metabolism.
Amino acids: Any of a class of organic compounds that contains at least one amino group, -NH2, and one carboxyl, -COOH: the alpha-amino acids, RCH(NH2)COOH, are the building blocks from which proteins are constructed.
Answer:
Chemical reactions would slow down and even not proceed at all without enzymes.
Explanation:
Enzymes are protein catalysts, meaning they speed up chemical...
Determine the quantity of each atom in a compound
1. CaCO3
2.3 BaF2
3.4 H₂PO4
4. Sr(OH)₂
5. 3 Al2(Cr₂O7)3
A solution is 0.225M Na2SO4. What is the molarity of the sodium ion in solution
The molarity of the sodium ion in the solution is 0.450 M.
How do we determine the molarity of sodium ions in a solution?The molarity of the sodium ion in a solution can be determined by the dissociation of the given solution Na2SO4(sodium sulfate).
The dissociation of Na2SO4 is computed as follows:
1 mole of Na2SO4 dissociates to give 2 moles of sodium cations and 1 mole of sulfate anion.i.e.
[tex]\mathbf{Na_2SO_4 \to 2Na^{+} + SO_4^{2-}}[/tex]
The molarity for sodium-ion [Na+] is:
= 2 × 0.225 M
= 0.450 M
Learn more about the molarity of a substance here:
https://brainly.com/question/10608366
#SPJ11
which experimental technique was most likely used by the students to determine the rate of reaction?
The students can determine the rate of reaction by measuring change in concentration of reactant or product with time.
What is rate of reaction?The rate of a reaction is the rate at which reactant molecules are used up or the rate at which product molecules are formed.
The rate of a reaction can be determined by measuring the change in concentration of the reactant at each given time in a reaction.
The rate of reaction can be also be determined by measuring the change in concentration of the product at each given time in a reaction.
Therefore, the students can determine the rate of reaction by measuring change in concentration of reactant or product with time.
Learn more about rate of reaction at: https://brainly.com/question/24795637
#SPJ11
What is the mass percent of Fe in iron(II) chloride
Which of the following reactions would result in decreased entropy?
Q A. CO,(s) → CO2(g)
OB. H₂O(g) → H₂O()
OC. 203(g) → 30₂(g)
D. N₂204(g) → 2NO₂(g)
The reaction that would result in decreased entropy is : ( A ) CO(s) → CO2(g)
What are Endothermic reactionsReactions that absorb heat from its surroundings are known as endothermic reactions, Endothermic reactions result in a decreased entropy as the temperature of the surrounding becomes lower than the temperature of the container where the reaction occurs.
Examples of endothermic reactions are : melting and evaporation which results in the change of state from solid to liquid or from solid to gaseous state.
Hence we can conclude that The reaction that would result in decreased entropy is : ( A ) CO(s) → CO2(g)
Learn more about endothermic reactions : https://brainly.com/question/10508226
#SPJ1
Drag each tile to the correct location.
Classify the reactions as endothermic or exothermic.
The reaction between
ammonium nitrate and
water absorbs heat
from the surrounding
environment.
Three drops of concentrated
sulfuric acid added to 100
milliliters of water in a beaker
makes the beaker hot.
Ammonium chloride dissolved
in a beaker of water makes the
beaker cold.
Uranium atoms are split to
produce nuclear energy.
Water separates into
hydrogen and oxygen
when an electric current
is run through it.
Methane and oxygen are
combined to produce
methanol and heat.
Reset Next
Post Test: Chemical Reactions
© 2022 Edmentum. All rights reserved.
First and fifth reaction shows endothermic reaction while the rest of it shows exothermic reaction.
What reaction shows exothermic and endothermic reaction?The reaction between ammonium nitrate and water is an example of endothermic reaction because it absorbs heat from the surrounding environment.
Three drops of concentrated sulfuric acid added to 100 milliliters of water in a beaker makes the beaker hot because exothermic reaction occur.
Ammonium chloride dissolved in a beaker of water makes the beaker cold which shows that it is exothermic reaction because heat leaves the solution.
Uranium atoms are split to produce nuclear energy is an example of exothermic reaction.
Water separates into hydrogen and oxygen when an electric current is run through it that shows endothermic reaction.
Methane and oxygen are combined to produce methanol and heat is an example of exothermic reaction.
Learn more about reaction here: https://brainly.com/question/11231920
#SPJ1
How many atoms are present in 2.1 moles of Fe
Answer:
1.3 x 10²⁴ atoms Fe
Explanation:
To convert moles to atoms, you need to multiply your given value by Avogadro's Number. This causes the conversion to occur because Avogadro's Number exists as a ratio. It is the ratio that allows for the cancellation of units during multiplication. This is why atoms should be in the numerator of your conversion. The final answer should have 2 sig figs to reflect the given value.
Avogadro's Number:
1 mole = 6.022 x 10²³ atoms
2.1 moles Fe 6.022 x 10²³ atoms
--------------------- x ------------------------------- = 1.3 x 10²⁴ atoms Fe
1 mole
hydrochloride acid +_________ zinc chloride +hydrogen
Answer:
Hydrochloride acid + Zinc = Zinc Chloride + Hydrogen
Explanation:
When Hydrochloride acid and Zinc react, it results in the formation of Zinc chloride and hydrogen.
Hope I helped
. Sodium hydroxide is added drop by drop to some hydrochloric acid in a beaker. Which of the following occurs in the beaker? .
Answer:
Table salt+water
Explanation:
When hydrochloric acid and sodium hydroxide interact it results in the formation of salt and a release of heat. The result of these 2 highly aggressive compounds is table salt and water. (Compounds that are ultimately harmless, even beneficial to us human beings)
Hope i helped
How many moles of fluorine atoms are in a sample of fluorine that contains 7.45 x 10^24 fluorine atoms? (Report your answer to one place past the decimal point.
Based on the calculations, the number of moles of fluorine atoms present is equal to 12.4 moles.
How to calculate the moles of fluorine atoms?In order to determine the number of moles of fluorine atoms, we would calculate the number of atoms in 1 mole of an fluorine atoms in accordance with Avogadro's constant.
1 mole of fluorine atom = 6.02 × 10²³ molecules
X moles of fluorine atom = 7.45 × 10²⁴ molecules
Cross-multiplying, we have:
X = 7.45 × 10²⁴/6.02 × 10²³
X = 12.4 moles.
Read more on moles here: https://brainly.com/question/27952083
#SPJ1
The Oxidation number of iron in the Complexion [Fe(CN) 6]³^- is what?
+3
Hence, the magnetic behaviour of the complex is paramagnetic. The oxidation number of the central metal atom: The oxidation number of the metal iron is +3.
Answer:
the oxidation number of iron in the complexion is +3 or x=+3
The bonds of the product store 27 KJ more energy than the bonds of the reactants how is energy conserved during this reaction
A.The reaction creates 27 kj of energy when bonds form.
B.The reaction system absorbs 27 kj of energy from the surroundings.
C.The reaction uses up 27 kj of energy when bonds break.
D.The surroundings absorb 27 kj of energy from the reaction system.
ANSWER: the answer is b
If the bonds of the product store 27 KJ more energy than the bonds of the reactants, It means the surroundings absorb 27 kj of energy from the reaction system Hence, Option (D) is the correct answer
What is the Exothermic reaction ?An exothermic process releases heat, causing the temperature of the immediate surroundings to rise.
The bonds of the product store 27 KJ more energy than the bonds of the reactants, It means that energy has been absorbed by the surrounding as the product formed is more stable due to more stronger bond
This can be inferred from more stored energy with in the bonds and Thus, It is a exothermic reaction.Hence, Option (D) is the correct answer
Learn more about exothermic reaction here ;
https://brainly.com/question/9799465
#SPJ1
0.467 mol NaCl are needed to
create a 0.875 m solution using 534
g of water. How many grams of
sodium chloride are required to
make the solution?
The mass, in grams, of sodium chloride needed would be 27.29 grams.
Number of molesThe number of moles of a substance is mathematically given as:
Mole = mass/molar mass.
Thus, mass = mole x molar mass.
In this case, 0.467 moles of NaCl is needed. The mass of 0.467 moles of NaCl can then be calculated as:
Mass = 0.467 x 58.44 = 27.29 grams.
More on number of moles can be found here: https://brainly.com/question/12513822
#SPJ1
A 10.0 ml portion of 0.010 m hcl is diluted by adding it to100.0 ml of water. what is the ph of the solution
From the calculation, the pH of the solution after dilution is 3.
What is the pH?The pH is the hydrogen ion concentration of the solution. Now we know that;
C1 = 0.010 m
V1 = 10.0 ml
V2 = 10.0 ml + 100.0 ml = 110 ml
C2 = ?
C1V1 = C2V2
C2 = C1V1 /V2
C2 = 0.010 m * 10.0 ml / 110 ml
C2 = 0.00091 M
pH = -log[0.00091 M]
pH = 3
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
