A 20 mL volume of a hydrochloric acid solution, HCl (aq), was placed into a beaker containing an appropriate
acid-base indicator. It was titrated with a solution of sodium hydroxide, NaOH (aq), until the endpoint was
reached. If 25 mL of sodium hydroxide solution with a concentration of 0.20 mol/L was used, what is the
concentration of the acid?
Select one:
a. 2.5 mol/L
O
b. 0.20 mol/L
C. 0.25 mol/L
d. 2.0 mol/L​

Answer:

There are no oxygen

Explanation:

Hydro is used when naming hydrogen compound and oxo is used when naming oxygen compound

Answer:

47

Explanation:

Silver (Ag), chemical element, a white lustrous metal valued for its decorative beauty and electrical conductivity. Silver is located in Group 11 (Ib) and Period 5 of the periodic table

The atomic number of silver is 47.

That also means that silver has 47 electrons and 47 protons.

The atomic mass of silver is 108u.

107 - 47 = 60

Silver has 60 neutrons.

Answer:

N = n× l

N = number of entities

n= moles

l = Avogadro's constant = 6.023 × 10^23

3.01 × 10^ 23 = n * 6.023 × 10^23

n = 3.01 × 10^23/6.023 × 10^23

n= 0.5moles

Molar mass = mass/ number of moles

Molar mass = 56

mass = 56 × 0.5

= 28g

Hope this helps.

Answer:

no

Explanation:

this experiment could not be replicated, because there are no specific measurements. the details would not be the same because it does not include the type of paper used nor the diameter, width or length. A guess of the measurements would be the only way to replicate this experiment but other then that, no you cannot.

Answer: The percent yield for the [tex]NaBr[/tex] is, 86.7 %

Explanation : Given,

Moles of [tex]FeBr_3[/tex] = 2.36 mol

Moles of [tex]NaBr[/tex] = 6.14 mol

First we have to calculate the moles of [tex]NaBr[/tex]

The balanced chemical equation is:

[tex]2FeBr_3+3Na_2S\rightarrow Fe_2S_3+6NaBr[/tex]

From the reaction, we conclude that

As, 2 moles of [tex]FeBr_3[/tex] react to give 6 moles of [tex]NaBr[/tex]

So, 2.36 moles of [tex]FeBr_3[/tex] react to give [tex]\frac{6}{2}\times 2.36=7.08[/tex] mole of [tex]NaBr[/tex]

Now we have to calculate the percent yield for the [tex]NaBr[/tex].

[tex]\text{Percent yield}=\frac{\text{Experimental yield}}{\text{Theoretical yield}}\times 100[/tex]

Experimental yield = 6.14 moles

Theoretical yield = 7.08 moles

Now put all the given values in this formula, we get:

[tex]\text{Percent yield}=\frac{6.14mol}{7.08mol}\times 100=86.7\%[/tex]

Therefore, the percent yield for the [tex]NaBr[/tex] is, 86.7 %

Answer: Environmental bias can be defined as the idea that suggests a group of people being living in the environment which is harmful for them.

Explanation:

There are three categories that make up the environmental bias there are socio-cultural choice, occupational choice, and personal choice.

The environmental bias can be related to chemistry as chemical lab is an area prone to chemical (acid, alkali) and fire so produced in reactions thus prone to accidental hazards not safe for working of people. But people like to work in chemical lab due to their personal and occupational choice.

Answer:

Visible wavelengths range from 0.0007 milimeters for red light, through orange, yellow, green, and blue, to 0.0004 milimeters for violet light.

Ultraviolet is shorter wavelengths than violet.

Hope This Helps.

Answer:

Freshly prepared ferrous sulphate is used in brown ring test, because if FeSO4 is stored or it is the old one then it reacts with atmospheric oxygen and gets oxidized to form a corrosive brown-yellow coating of basic ferric sulphate, which is an adduct of ferric oxide and ferric sulphate

HEYA FRIEND

.

.

HERE'S YOUR ANSWER

.

.

.

.

It is used in brown ring test because , if Fe2So4 is stored or it is old one then it reacts with atmospheric oxygen and gets oxidized to form a corrosive brown yellow coating of basic ferric sulphate , which is an adduct of ferric oxide and ferric sulphate.

.

✌✌✌

HOPE IT WILL HELP YOU UP

.

.

KATË

Answer:

Test tubes A and B turn a darker blue color.

Explanation:

Based on the information provided in the question it can be said that they should have noticed that Tube A and Tube B turned a dark blue color. This is because the starch turns the solution in the test tubes into a dark blue color due to the negative reaction caused by the conversion of starch present in salivary amylase

Answer:

The equation is CuCO₃ ⇆ CuO + CO₂. So it's a decomposition reaction, so a solid broke down into two other substances. This means that bonds were broken, so the reaction must be endothermic.

Answer:

See explanation below

Explanation:

You forgot to put the picture to do so. In this case, I manage to find one, and I hope is the one you are looking for. If not, then post it again and I'll gladly help you out again.

According to the picture with the answer, we have a cyclohexane with 4 methyl groups there. Two of them are facing towards the molecule with a darker bond. This means that the alkyl bromide, should have a bromine in one of the bonds, and in order to produce an E2 reaction, this bromine should be facing in the opposite direction of the methyl groups which are facing towards. This is because an E2 reaction occurs with the less steric hindrance in the molecule. If the bromine is in the same direction as the methyl group, it will cause a lot more of work to do a reaction, and therefore, an E2 reaction. I will promote instead a E1 or a sustitution product.

Therefore the alkyl bromide should be like the one in the picture 2.

Answer:

There are C - C  bonds and C - H bonds.

trust me! I took a test with this question and got 100! :)

Explanation:

Answer:

Chemical

Explanation:

Because it's being done by chemical means

Answer:

Normal boiling point is the temperature at which a liquid boils at 1 atmosphere of pressure.

Explanation:

Answer:

0.0008127

Explanation:

This is easy

C.heat the solution

Answer:

The most important use of liquid crystals is in displays because the molecules of a liquid crystal can control the amount, color, and direction of vibration of the light that passes through them. hope that helps love!

Answer:

Silver ion

Explanation:

In an electrolytic cell, the positive ions known as the cations migrate to the negative electrode, the cathode where they accept electrons to become discharged as neutral atoms. Also, the negative ions known as the anions migrate to the positive electrode, the anode, where they give up their electrons to become discharged as neutral atoms.

From the question above, the only positive ion among the options given is the silver ion, Ag+, therefore, it is the correct option.

Answer:

1) Sodium Chloride

2) Potassium Dichromate

3)Calcium Chloride

4)Sodium Bisulfate

Explanation:

Ex:1) Sodium chloride (NaCl) is the most common type of salt in our lives. Known as table salt, it forms a cubic lattice when it's in solid form. It's one of the safest materials you can use in a chemistry class or kitchen.

Ex:2) Potassium dichromate (K2Cr2O7) is an orange-colored salt composed of potassium, chromium and oxygen. Not only is it toxic to humans, it's also an oxidizer that is a fire hazard. Potassium dichromate should never be thrown away. Instead, it should be washed down the drain with a lot of water. Always use rubber gloves when working with this compound. If you spill a potassium dichromate solution on your skin, it gives you a chemical burn. Keep in mind that any compound with chromium in it is a potential carcinogen.

Ex:3)Calcium chloride (CaCl2) resembles table salt in its white color. It is widely used to remove ice from roads. It's more effective than sodium chloride as a deicer, because calcium chloride produces three ions, while calcium chloride produces only two. Calcium chloride can melt ice down to minus 25 F, as much as 10 degrees lower than for sodium chloride. Calcium chloride is so hygroscopic, which is the ability to absorb water, that if you leave it in a room uncovered, it can absorb enough water from the air to dissolve into a solution all on its own.

Ex:4) Sodium bisulfate (NaHSO4) forms from sodium, hydrogen, sulfur and oxygen. It is created from sulphuric acid and retains one of the acid's hydrogen ions, which gives this salt acidic qualities. Known as a dry acid, sodium bisulfate is used in commercial applications, such as reducing the pH level of spas and swimming pools, washing concrete and cleaning metals. In its solid form, sodium bisulfate forms white beads. This salt is poisonous and can damage your skin, so use rubber gloves when handling it. If ingested, call the poison control center immediately and do not induce vomiting.

Answer:

231.735 g/mol

Explanation:

Answer:

Oil prices would decrease, and availability would increase

Explanation:

Answer:

Heat travels faster in solids.

Heat travels slower in gases.

Explanation:

The state of matter in which heat travels in fastest way is solid and in gaseous state heat travels in slowest way.

Heat transfer is a process in which heat can travel from one body to another body or from high temperature to low temperature.

In solid state heat will travel in the fastest way because molecules are arranged very close to each other and heat will travel through conduction process. And in gaseous state heat will travel with slowest way as molecules are arranged in very distance.

Hence in solid, heat travels in fastest way and in gases heat travels in slowest way.

To know more about heat conduction, visit the below link:

https://brainly.com/question/1121702

Answer:

pH: 4.80617997398

pOH: 9.19382002602

[H+]: 1.5625E-05

[OH-]: 6.4E-10

ACID

Hope it helps :)

Answer:

THE NEW PRESSURE OF THE GAS AT 50 °C IS 2.41 atm.

Explanation:

Initial temperature = 35 °C = 35 + 273 K= 308 K

Final temperature = 50 °C =50 + 273 K = 323 K

Initial pressure = 2.3 atm

Final pressure = unknown

Using the combined gas equation to get the relationship between pressure and temperature for a given gas sample, we have;

P1 / T1 = P2 / T2

P2 = P1 T2 / T1

P2 = 2.3 * 323 / 308

P2 = 742.9 /308

P2 = 2.41 atm.

THE NEW PRESSURE IS 2.41 atm at 50 °C

Answer:

Explanation:

H

Answer:

A

Explanation:

Answer:

a

Explanation: