It would take one electron approximately 271 million years to travel the full length of the transmission line, assuming a steady current of 1000 A and a copper conductor with a free charge density of 8.5 x 10^28 electrons per cubic meter.
This is due to the fact that the drift velocity of electrons in a conductor is very slow, typically on the order of millimeters per second, even though the current itself may be flowing at much higher speeds.
[tex]v_d = I / (nAq)[/tex]
We can rearrange this equation to solve for the time it takes for an electron to travel a distance d:
[tex]t = d / v_d = (dqA) / I[/tex]
[tex]t = (200 km * 1000 m/km * 8.5 x 10^28 electrons/m^3 * (π(0.01 m)^2/4) * 1.6 x 10^-19 C/electron) / (1000 A)[/tex]
[tex]t = 8.53 x 10^15 seconds[/tex]
This is equivalent to approximately 271 million years.
To know more about Transmission line, here
https://brainly.com/question/14902531
#SPJ4
what is the value of n for the electron following the emission?
The value of n for the electron emissions will be refer in each of the photoelectric effect, radioactivity. electron microscopy.
Photoelectric effect: In this process, electrons are emitted from a metal surface when light is shone on it. The energy of the incident light is absorbed by electrons in the metal, causing them to be ejected from the surface. "n" could refer to the energy level of the electron in the metal before it is ejected, which would determine the kinetic energy of the emitted electron.
Radioactive decay: Some radioactive isotopes undergo a process called beta decay, in which a neutron in the nucleus decays into a proton, emitting an electron in the process. "n" could refer to the energy level of the electron in the nucleus before it is emitted.
Electron microscopy: In electron microscopy, a beam of electrons is used to image a sample at high resolution. "n" could refer to the number of electrons emitted from the source, which would determine the intensity of the electron beam.
To know more about electrons here
https://brainly.com/question/860094
#SPJ4
Can someone answer please
Addition work required to move spring by extra 10cm is 12J.
Define sprint constant.
A restoring force that is proportional to the spring's displacement is stored in a spring when it is compressed or relaxed. The force needed to extend or compress a spring by a unit length is specified by the spring constant. The stiffness constant is another name for it.
According to Hooke's Law, the force required to compress or lengthen a spring is inversely related to the length of the spring. By deducting the initial work from the overall job or the completed work, additional work can be computed.
Work done = 1/2 kx^2
x1 = 10cm = 0.1m
x2 = 10+10 = 20cm = 0.2m
W1 = 4J
W1 = 4 = 1/2 k *0.1*0.1
k = 4*2 /0.01 = 800N/m
W2 = 1/2 *800*0.2*'0.2
W2 = 400*0.04 = 16J
So required work is W = W2-W1
W 16-4 = 12J
To learn more about sprint constant use link below:
https://brainly.com/question/22712638
#SPJ1
A 0.112-kg billiard ball moving at 154 cm/s strikes a second billiard ball of the same mass moving in
the opposite direction at 46 cm/s. The second billiard ball rebounds and travels at 72 cm/s after the
head-on collision.
Determine the post-collision velocity of the first billiard ball.
The post-collision velocity of the first billiard ball is 272 cm/s.
Define VelocityVelocity is a vector quantity that describes an object's speed and direction of motion.
We can solve this problem by using the law of conservation of momentum, which states that the total momentum of an isolated system remains constant.
The momentum of an object is defined as the product of its mass and velocity:
p = m * v
The total initial momentum of the system is the sum of the momenta of the two billiard balls before the collision:
p_initial = m * v1 + m * v2
where m is the mass of each billiard ball, v1 is the initial velocity of the first billiard ball, and v2 is the initial velocity of the second billiard ball.
After the collision, the first billiard ball will rebound with a velocity v1', and the second billiard ball will rebound with a velocity v2'. The total final momentum of the system is the sum of the momenta of the two billiard balls after the collision: p_final = m * v1' + m * v2'
Since the law of conservation of momentum applies, we can set the initial momentum equal to the final momentum
p_initial = p_final
Substituting the given values, we get:
m * v1 + m * v2 = m * v1' + m * v2'
Simplifying, we get:
v1' = (m * v1 + m * v2 - m * v2') / m
v1' = v1 + (v2' - v2)
Plugging in the given values, we get:
v1' = 154 cm/s + (72 cm/s - (-46 cm/s))
v1' = 272 cm/s
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ1
what is the magnitude of the acceleration experienced by an electron in an electric field of 750n/c? how does the direction of the acceleration depends on the direction of the field at that point?
The magnitude of the acceleration experienced by an electron in an electric field of 750 N/C is approximately 1.318 × 10¹⁴ m/s².
If the electric field is in the direction of positive x-axis, the electron will be accelerated in the negative x-axis direction. If the electric field is in the direction of positive y-axis, the electron will be accelerated in the negative y-axis direction, and so on.
The magnitude of the acceleration experienced by an electron in an electric field can be calculated using the formula:
a = F/m
where F is the force experienced by the electron in the electric field, and m is the mass of the electron.
The force experienced by an electron in an electric field is given by:
F = qE
where q is the charge of the electron, and E is the electric field strength.
The mass of an electron is approximately 9.11 × 10⁻³¹ kg, and the charge of an electron is -1.602 × 10⁻¹⁹ C.
Substituting these values, we get:
F = (-1.602 × 10⁻¹⁹ C) × (750 N/C) = -1.2015 × 10⁻¹⁶ N
a = F/m = (-1.2015 × 10⁻¹⁶ N) / (9.11 × 10⁻³¹ kg) ≈ -1.318 × 10¹⁴ m/s²
Therefore, the magnitude of the acceleration experienced by an electron in an electric field of 750 N/C is approximately 1.318 × 10¹⁴m/s².
The direction of the acceleration of the electron depends on the direction of the electric field at that point. By convention, the direction of the electric field is the direction in which a positive charge would experience a force. Since the charge of an electron is negative, the force experienced by an electron in an electric field is opposite in direction to the electric field.
Learn more about electric field here :
brainly.com/question/15800304
#SPJ4
For both waves on strings and sound waves in tubes,
A. The mode number is independent of the wavelength.
B. A higher mode number means a shorter wavelength.
C. A higher mode number means a longer wavelength.
The correct statement is B.
A higher mode number means a shorter wavelength.
What is Wavelength?
Wavelength is an important characteristic of all types of waves, including electromagnetic waves (such as light and radio waves) and mechanical waves (such as sound waves and water waves). In general, the wavelength of a wave is determined by the source of the wave, the medium through which it travels, and the frequency of the wave.
The correct statement is B. A higher mode number means a shorter wavelength.
In both cases, the mode number refers to the number of segments, or nodes, into which the wave can be divided. The wavelength, on the other hand, refers to the distance between two adjacent peaks or troughs of the wave.
When the mode number increases, the number of segments or nodes in the wave increases, which means that the wavelength must decrease in order to maintain the same frequency of the wave. This is because the total length of the string or tube remains the same, and so the length of each segment must decrease as the number of segments increases. Therefore, a higher mode number corresponds to a shorter wavelength.
Learn more about Wavelength from given link
https://brainly.com/question/10750459
#SPJ1
a golfer hits an iron shot with a new club as she approaches the green. she is pretty sure, based on past experience, that she hit the ball with a speed of 50 m/s , but she is not sure at what angle the golf ball took flight. she observed that the ball traveled 100 m before hitting the ground. what angle did she hit the ball?
θ = 49.3° at this angle she hit the ball.
The initial velocity of the ball can be broken down into its x and y components:
Vₓ = 50 * cos(θ)
Vy = 50 * sin(θ)
The ball's position can be found using the kinematic equations for constant acceleration due to gravity:
[tex]X = V_{x} * t\\Y = V_{y}* t - (\frac{1}{2}) * 9.81 * t^{2}[/tex]
Since we know the ball's final position is 100 m, we can set these equations equal to 100 and solve for t:
[tex]100 = V_{x} * t\\100 = V_{y} * t - (\frac{1}{2}) * 9.81 * t^{2}[/tex]
From here, we can solve for the angle θ. Rearranging the initial velocity equation:
Vy = 50 * sin(θ)
We can substitute this into the equation for Y, and solve for θ:
θ = [tex]arcsin\frac{(2*(100 + (\frac{1}{2})*9.81*t^{2}))}{(50*t)}[/tex]
After solving the equations for t, we can plug that value into this equation for θ and get the angle at which the ball was hit.
The answer is θ = 49.3°
learn more about initial velocity Refer:brainly.com/question/9163788
#SPJ4
advantages and disadvantages of being firstborn
Answer:
Advantages of being firstborn:
Increased attention and nurturing from parents, as they are often more invested in the success of their first child.Higher levels of academic and intellectual stimulation, as parents may provide more resources and opportunities for learning.Greater responsibility and maturity, as the firstborn often has to help care for younger siblings and take on leadership roles in the family.Disadvantages of being firstborn:
Increased pressure to set a good example, both academically and behaviorally, for younger siblings.Less individual attention from parents as more children are born and added to the family.More conflict with younger siblings as the firstborn may feel resentment about having to share resources and attention.A lack of opportunities for leadership and responsibility later in life, as younger siblings may fill these roles.Explanation:
Answer:
Advantages and disadvantages of being firstborn
Explanation:
Advantages of being a firstborn include having higher self-esteem and academic achievements, being seen as more responsible, and receiving extra attention from parents.
Disadvantages of being a firstborn include the pressure to live up to high expectations and the possibility of feeling resentful that their younger siblings get more freedom.
PLEZS HELP I DON'T GET IT WILL MARK BRANILEST FOR THE BEST ANSWER :) Imagine that you were flying a small aircraft alone and had to
make an emergency landing in the forest below. Being the
amazing pilot that you are, you land safely, but your aircraft
is badly damaged and will not fly. It will be several days before
help can make it out to you, and you only have five items in
your emergency survival kit.
Would you rather land in a taiga or a temperate coniferous
forest? Why? What would you want in your survival kit and why?
What would you need from the forest to survive? What would the
dangers be?
Write your response in complete sentences.
suppose a 59.5 kg gymnast climbs a rope. (a) what is the tension (in n) in the rope if he climbs at a constant speed?
The required tension in the rope if he climbs at constant speed is said to be 583.7 N.
The mass of the gymnast is given as 59.5 kg.
It is said that he climbs a rope at constant speed. This speed is to be calculated.
An object is said to be moving at a constant pace when it covers the same distance in the same amount of time. When moving at a constant pace, an object covers a fixed distance in a fixed amount of time.
The action-reaction pair of forces operating at either end of the aforementioned elements can also be thought of as tension. A string, rope, chain, or other similar object, or both ends of a rod, truss member, or other equivalent three-dimensional object, transmits tension when they pull in the same direction.
Drawing a free-body diagram has allowed us to:
T - m g = 0
T = m g = 59.5(9.81) = 583.7 N
Thus, the tension in the rope if he climbs at constant speed is said to be 583.7 N.
To know more about tension:
https://brainly.com/question/29526581
#SPJ4
a 0.20 kg mass on a horizontal spring is pulled back 2.0 cm and released. if, instead, a 0.40 kg mass were used in this same experiment, the total energy of the system would
By the help of potential energy of the spring, so option A) 0.21 m/s is the correct answer.
There is no energy in the spring in its normal state, which is when it is not stretched. However, the spring can store energy when it is in a position that is different from its normal position because of the position. Potential energy is the name for this accumulated energy. The accumulated potential energy as a result of a specific elastic item, such as a spring, deforming is known as the potential energy of the spring. It reflects the labor involved in stretching the spring and is dependent on both the length of the stretch and the spring constant, k.
the energy of the spring = [tex]\frac{1}{2} kx^2[/tex]
so it depends on spring's constant
and change in length
so it is independent of mass
so, A) remains the same is the correct answer
B) total energy =[tex]0.5mv^2= 0.5\times0.2\times0.3^2[/tex]
total energy = [tex]9\times10^-3 J[/tex]
v = 0.21 m/s
so 0.21 m/s is the correct answer
Learn more about potential energy
brainly.com/question/29510087
#SPJ4
How do we define work as the product of force and distance in the direction of force?
Answer:
Work is defined as the product of force and distance in the direction of force because it represents the amount of energy that is transferred from one object to another as a result of a force being applied over a certain distance.
The definition of work as the product of force and distance (W = Fd) is based on the concept of energy transfer. Energy is defined as the ability to do work, and work is defined as the transfer of energy from one object to another. When a force is applied to an object over a certain distance, the energy that is transferred is equal to the amount of work done.
As a boat travels at 43. 0 km/h across the surface of a still lake, the waves it creates in the water have a speed of 25. 3 km/h
The waves created by the boat have a speed of 25.3 km/h, a period of approximately 0.37 hours, and a frequency of approximately 0.027 h⁻¹
When a boat travels at a certain speed across the surface of a still lake, it creates a series of waves that spread outwards from the boat. The speed of these waves depends on the properties of the water, such as its depth and temperature.
In this case, the boat is traveling at a speed of 43.0 km/h across the surface of a still lake, and the waves it creates in the water have a speed of 25.3 km/h.
The speed of the waves created by the boat can be calculated using the formula:
v = sqrt(gλ/2π)
where v is the speed of the waves, g is the acceleration due to gravity (9.81 m/s^2), λ is the wavelength of the waves, and π is the mathematical constant pi (approximately equal to 3.14).
Assuming that the wavelength of the waves is proportional to the speed of the boat, we can use the following formula to relate the wavelength of the waves (λ) to the speed of the boat (vb) and the speed of the waves (v):
λ = (v + vb) T
where T is the period of the waves, which is the time it takes for one complete wavelength to pass a fixed point.
We can rearrange this formula to solve for the period:
T = λ / (v + vb)
Substituting the given values, we get:
T = λ / (v + vb) = (25.3 km/h) / (43.0 km/h + 25.3 km/h)
T ≈ 0.37 hours
Finally, we can use the period of the waves to calculate their frequency (f), which is the number of waves that pass a fixed point in one second:
f = 1 / T
f = 1 / 0.37 hours ≈ 0.027 h⁻¹
Therefore, the waves created by the boat have a speed of 25.3 km/h, a period of approximately 0.37 hours, and a frequency of approximately 0.027 h⁻¹.
Learn more about speed here :
brainly.com/question/28609029
#SPJ4
4) based on your data, compare the superposition principle for the electric fields and electric potential?
The electric field follows vector superposition while the voltage follows scalar superposition, which is the difference between the two superpositions (i.e., The net electric field at any point is the vector sum of the electric field due to the individual charges).
What is Electric field?
The term "electric field" refers to the physical field that surrounds electrically charged particles and acts to either attract or repel all other charged particles in the field (or E-field). One of the four fundamental interactions, or forces, of nature is the electromagnetic field, which manifests in both electric and magnetic fields. Electric fields, which are significant in many parts of physics, are used in electrical technology.
For instance, in atomic physics and chemistry, the electric field serves as the attractive force that holds the atomic nucleus and electrons of an atom together.
Moreover, it is the force that causes molecules to form when atoms bind chemically.
To learn more about Electric field visit;
https://brainly.com/question/15800304
#SPJ4
According to the laws of thermodynamics, all energy transformations are inefficient because every reaction loses some energy to the surroundings as ________.
According to the laws of thermodynamics, all energy transformations are inefficient because every reaction loses some energy to the surroundings as heat
The second law of thermodynamics states that entropy in a system always has a tendency to rise. It claims that because some energy is constantly lost as heat with each energy transfer, no energy transfer mechanism is ideal. The system's entropy rises as a result of the energy wasted. Due to this, only 10% of the energy from one tropic level gets transferred to the next, with the remaining 90% being wasted as heat.
According to the second rule of thermodynamics, some energy is transferred as heat. Numerous biological processes include this ineffective energy transfer.
This indicates that part of the input energy gets transformed into a highly disordered form of energy when energy is transformed into a different form.
To know more about thermodynamics on
https://brainly.com/question/2305564
#SPJ4
a sledge (including load) weighs 5000 n. it is pulled on level snow by a dog team exerting a horizontal force on it. the coefficient of kinetic friction between sledge and snow is 0.05. how much work is done by the dog team pulling the sledge 1000m at constant speed?
On light snow and hard snow, the coulomb friction coefficients were estimated to be 0.03 and 0.05, respectively. In this investigation, the intermediate and final phases of the coulomb friction coefficient were between 0.03 and 0.04. Thus, option B is correct.
What coefficient of kinetic friction for sledge and snow?The snow exerts kinetic frictional force on the sled's runners, slowing down and ultimately stopping the sled from moving. The coefficient of kinetic friction is 0.050.
Determine the value of the friction force.
[tex]F=uN = [0.05] [5000N] = 250N[/tex]
Here, N is the sledge's normal reaction force.
Write the expression for the work done.
[tex]F = f *d[/tex]
Here, d represents the horizontal distance.
[tex]W= (250)N (1000m) = 2.5 * 10^5 J[/tex]
Therefore, 2.5 * 10^5 The dog team pulls the sledge 1000 meters at a consistent speed to complete the task.
Learn more about kinetic friction here:
https://brainly.com/question/29100737
#SPJ4
The given question is incomplete. The complete question is given below:
A sledge (including load) weighs 5000 N. It is pulled on level snow by a dog team exerting a horizontal force on it. The coe�cient of kinetic friction between sledge and snow is 0.05. How much work is done by the dog team pulling the sledge 1000 m at constant speed?
A. 2.5×10^4J
B. 2.5×10^5J
C. 5.0×10^5J
D. 2.5×10^6J
E. 5.0×10^6J
Sarah rides her horse with a constant speed of 8 km/h. How far can she travel in 1 1/2 hours?
Answer:
12 Kilometers
Explanation:
To find the distance Sarah travels in a given time, we can use the formula:
distance = speed * time
In this case, the speed of the horse is 8 km/h and the time Sarah travels is 1 1/2 hours.
distance = 8 km/h * 1 1/2 hours = 12 km
So, Sarah can travel 12 kilometers in 1 1/2 hours.
1. find the distance between a 0.300 kg billiard ball and a 0.400 kg billiard ball if the magnitude of the gravitational force between them is 8.92 x 10-11 n.
The distance between two pool balls are separated by 0.0424 m.
By gravitational force, what do you mean?The gravitational pull draws any two mass-containing things together. It mentions the gravitational force. The force will always be applied along the line joining the two masses in the direction of the other mass, according to the formula F=Gm1m2r2.
The following formula can be used to determine the gravitational force between two objects:
F = G * (m1 * m2) / r²
where F is the gravitational force's strength, G is the gravitational constant (6.67 x 10-11 N×m2/kg), m1 and m2 are the objects' masses, and r is the separation between them.
To determine the separation between the two pool cues To account for r, we can rearrange this expression as follows:
Represents the objects' masses, while r denotes the separation between their mass centres.
Rearranging this formula to solve for r will allow us to get the distance between the two pool balls:
r = √(G × m1 × m2 / F)
Substituting the given values, we get:
r = √(6.67 x 10⁻¹¹ N*m²/kg² × 0.300 kg × 0.400 kg / 8.92 x 10⁻¹¹ N)
r = 0.0424 m
To know more about gravitational force visit:-
https://brainly.com/question/12528243
#SPJ1
how many ( ) capacitors can be charged from a new - , - battery before the battery is likely exhausted of its stored energy? assume the charging operation has a 50% efficiency. (within three significant digits)
The capacitor is used to store charge.
What is a capacitor?We have to know that the capacitor is the kind of device that can be used to store the electrical charges. As such, the capacitor can be able to be charged from a battery.
This question is incomplete and the mathematical details of the problem are missing. However, we should know that the efficiency of the charging would depend on the kind of battery that has been used and the nature of the capacitor as we have in the question above here.
Learn more about capacitor:https://brainly.com/question/17176550
#SPJ1
at what angle above the horizontal should the ball be thrown so that the runner will catch it just before it hits the ground? express your answer in degrees.
at the velocity of 60 degree angle above the horizontal should the ball be thrown so that the runner will catch it just before it hits the ground
For the person to be able to catch the ball, the horizontal component of velocity of the ball should be same as the speed of the person, i.e.,
v 0 cosθ= 2v 0
or cosθ= 21
or θ=60 ∘ .
Velocity is the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.
Learn more about velocity, visit: brainly.com/question/17127206
#SPJ4
the largest object in the asteroid belt is ceres with a radius of 470 km and a mass of 9.384*10^20 kg. what is the weight, in newtons, of a 160. kg astronaut standing on ceres
The largest object in the asteroid belt is ceres with a radius of 470 km and a mass of [tex]9.384*10^2^0 kg[/tex]. The weight of a 160. kg astronaut standing on ceres is 43.2 N.
The weight of the astronaut on Ceres can be calculated using the formula:
w = m * g
here,
w is weight of the astronaut,
m is mass of the astronaut, and
g is gravitational acceleration on Ceres.
The gravitational acceleration on Ceres:-
[tex]F = G * (m1 * m2) / r^2[/tex]
here,
F is gravitational force between two objects,
G is gravitational constant,
m₁ & m₂ are masses of the two objects, and
r is distance between them.
For an object of mass m near the surface of a spherical object of mass M and radius R, the distance r can be approximated as (R + h).
For Ceres, the gravitational acceleration:-
[tex]g = G * M / R^2[/tex]
here,
G is gravitational constant,
M is mass of Ceres, and
R is radius of Ceres.
Reserving values given:-
[tex]g = (6.67430 × 10^-^1^1^ ^m^3/(kg s^2)) * (9.384 × 10^20 kg) / (470000 m)^2[/tex]
[tex]g = 0.27 m/s^2[/tex]
Now, weight of the astronaut as:
w = m * g
[tex]w = 160 kg * 0.27 m/s^2[/tex]
w = 43.2 N
Therefore, the weight of a 160 kg astronaut standing on Ceres is approximately 43.2 newtons.
To know more about mass please refer: https://brainly.com/question/22159613
#SPJ4
An 420 kg car accelerates from 0 to 50 m/s^2 in 4.3 s.
What is the acceleration of the car and what is the force produced by the
car?
The acceleration of the car is [tex]11.63 m/s^2.[/tex] The force produced by the car is 4,876.4 Newtons.
How to calculate the force and acceleration?
To find the acceleration of the car, we can use the formula:
acceleration = (final velocity - initial velocity) / time
In this case, the initial velocity is 0 m/s, the final velocity is 50 m/s, and the time is 4.3 s. Substituting these values into the formula, we get:
acceleration = (50 m/s - 0 m/s) / 4.3 s =[tex]11.63 m/s^2[/tex]
Therefore, the acceleration of the car is[tex]11.63 m/s^2.[/tex]
To find the force produced by the car, we can use Newton's second law of motion, which states that force is equal to mass times acceleration:
force = mass x acceleration
In this case, the mass of the car is 420 kg, and the acceleration is 11.63 m/s^2. Substituting these values into the formula, we get:
[tex]force = 420 kg \times 11.63 m/s^2 = 4,876.4 N[/tex]
Therefore, the force produced by the car is 4,876.4 Newtons.
To learn more about acceleration and force:
brainly.com/question/20005124
#SPJ1
consider a circuit in which two light bulbs with equal resistance values are connected in parallel. if one of the light bulbs burns out, by what factor is the brightness of the other bulb multiplied?
A circuit in which two light bulbs with equal resistance values are connected in parallel. if one of the light bulbs burns out, By factor (2) is the brightness of the other bulb multiplied.
When two identical light bulbs are connected in parallel, the total resistance of the circuit is half of the resistance of each individual bulb. If one of the bulbs burns out, the total resistance of the circuit doubles, which means that the current through the remaining bulb is halved. The brightness of a light bulb is directly proportional to the current passing through it, so the brightness of the remaining bulb will be reduced by a factor of 2.
I = V/R
If both bulbs have the same resistance R and the same voltage V is applied to each, then the current passing through each bulb is:
I = V/R
When both bulbs are connected in parallel, the total current in the circuit is the sum of the currents through each bulb:
[tex]I_t_o_t_a_l = I_1 + I_2[/tex]
here,
[tex]I_1[/tex] & [tex]I_2[/tex] are currents passing by each bulb.
Reserving Ohm's law:-
[tex]I_t_o_t_a_l = V/R + V/R[/tex]
Simplifying:-
[tex]I_t_o_t_a_l = 2V/R[/tex]
The power P dissipated by each bulb is given by:
[tex]P = IV = V^2/R[/tex]
So the brightness of each bulb is proportional to [tex]V^2[/tex]. If one bulb burns out, the voltage across the remaining bulb remains the same, but the resistance of the circuit doubles, so the current passing through the remaining bulb is halved. This means that the power dissipated by the remaining bulb is reduced by a factor of 2, which corresponds to a reduction in brightness by the same factor. Therefore, the brightness of the remaining bulb is reduced by a factor of 2.
To know more about resistance please refer: https://brainly.com/question/11431009
#SPJ4
Can someone help me with this
(a) For graph A the object is moving at a zero constant speed.
(b) For graph B the object is moving at a constant speed greater than zero.
(c) For graph C the object is moving a uniform speed.
What is constant and uniform velocity?Constant velocity refers to a situation in which an object moves at a constant speed in a straight line. This means that the magnitude of the velocity (i.e. the speed) of the object remains the same over time, while its direction may or may not change.
Uniform velocity refers to a situation in which an object moves with a constant speed, but also changes its direction. In other words, the object has a constant magnitude of velocity (i.e. speed), but its direction is constantly changing. An object moving in a circular path at a constant speed is an example of an object with uniform velocity.
Learn more about constant and uniform velocity here: https://brainly.com/question/17487511
#SPJ1
determine which variables are known and which are not. an air-filled pipe is found to have successive harmonics at 480 hz , 800 hz , and 1120 hz . it is unknown whether harmonics below 480 hz and above 1120 hz exist in the pipe. what is the length of the pipe?
Below are the variables known and unknown of an air-filled pipe that have successive harmonica at 480hz, 800hz, 1120hzKnown. Successive harmonics at 480 Hz, 800 Hz, and 1120 Hz Unknown.
What are harmonics?Harmonics are overtones that are multiples of the fundamental frequency of a sound. They are produced when a sound wave is reflected from a surface, such as a wall or floor, and create a pleasant, ringing sound.
They are often used in music to create a fuller, richer sound. Harmonics can also be used to create a variety of effects in sound production, such as reverberation and echo.
For example, if a guitar is plucked, the note being played has a fundamental frequency but also has overtones which are produced by the guitar's body and strings.
To calculate the length of the pipe, it would be necessary to know the frequency of the first harmonic (the fundamental) and the frequency of the last harmonic. Without knowing this, it is not possible to calculate the length of the pipe.
Therefore, These overtones create a richer sound and are known as harmonics. The length of the pipe is unknown because the known harmonics do not provide enough information to calculate it.
Learn more about harmonics here:
https://brainly.com/question/9253932
#SPJ4
(ii) One possible path of the spacecraft as it approaches the planet is shown in fig.1.1 The spacecraft enters the orbit at point A with speed 3.7x10^3 ms^-1.At point B, a distance of 5.00x10^7 from the centre of the planet, the spacecraft has a speed of 4.1x10^3ms^-1. The mass of the spacecraft is 650kg. For the spacecraft moving from point B to point A, show that the change in gravitational potential energy of the spacecraft is8.3x10^9
The change in gravitational potential energy of the spacecraft as it moves from point B to point A is 8.3x10^9 J.
The change in gravitational potential energy of the spacecraft as it moves from point B to point A can be calculated using the formula:
[tex]ΔPE = -GMm(1/rA - 1/rB)[/tex] , where
ΔPE is the change in gravitational potential energy,
G is the gravitational constant,
M is the mass of the planet,
m is the mass of the spacecraft,
rA is the distance from the planet's center at point A, and
rB is the distance from the planet's center at point B.
Using the given values, we have:
[tex]ΔPE = -(6.67x10^-11 Nm^2/kg^2)(1.50x10^24 kg)(650 kg)(1/5.00x10^7 m - 1/0)[/tex][tex]ΔPE = -(6.67x10^-11 Nm^2/kg^2)(1.50x10^24 kg)(650 kg)(1/5.00x10^7 m - 1/0)[/tex]
Simplifying the expression, we get:
[tex]ΔPE = -8.3x10^9 J[/tex]
Therefore, the change in gravitational potential energy of the spacecraft as it moves from point B to point A is [tex]8.3x10^9[/tex]J, which is a negative value because the spacecraft is moving closer to the planet and its gravitational potential energy is decreasing.
To know more about gravity visit:
brainly.com/question/2497387
#SPJ1
in a grocery store, you push a 15.5 kg shopping cart, such that it feels a horizontal net force of 14.0 n. if the cart starts at rest, how far does it move in 3.00 s?
The shopping cart moves a distance of 4.57 meters in 3.00 seconds.
Using Newton's second law, which relates force, mass, and acceleration we can solve this problem
F = ma
where F is the net force acting on the object, m is its mass, and a is its acceleration.
In the given problem, the net force acting on the shopping cart is 14.0 N, and its mass is 15.5 kg. We can rearrange the equation above to solve for the acceleration of the cart:
a = F/m
a = 14.0 N / 15.5 kg
a = 0.9032 [tex]m/s^2[/tex]
Now we can use the kinematic equation that relates distance, acceleration, and time:
d = 1/2 * a * [tex]t^2[/tex]
where d is the distance traveled, a is the acceleration, and t is the time.
Plugging in the values we have:
d = 1/2 * 0.9032 [tex]m/s^2[/tex] * [tex](3.00 s)^2[/tex]
d = 4.57 meters
Therefore, the shopping cart moves a distance of 4.57 meters in 3.00 seconds.
To learn more about Newton's second law:
https://brainly.com/question/25545050
#SPJ4
for a person wearing these shoes, what??s the maximum angle (with respect to the horizontal) of a smooth rock that can be walked on without slipping?
The maximum angle (with respect to the horizontal) of a smooth rock that can be walked on without slipping is 50°.
Friction is a force that acts between two rough shells, whenever one tries to move one face against the other. When a force F pushes an object in one direction, there appears a disunion force in the contrary direction. Before stir thresholds, we're in the governance of static disunion.
Once the applied force is increased, the static disunion increases at the same rate, until it's reached a outside, denoted by maximum static disunion, and defined by the formula
[tex]f_s = \mu_s N[/tex]
The static measure between the shoe and the smooth gemstone is μs= 1.2
and hence the maximum static disunion is given by,
[tex]f_s = \mu_s N[/tex]
where N is the magnitude of the normal force. The forces acting on the shoe are
The gravitational force wielded by the Earth, of magnitude
F = mg
The normal force N wielded by the face of the gemstone, directed typically outwards from the gemstone.
The( static) disunion, wielded by the gemstone, in the direction overhead the gemstone( opposed to the tendency of slipping).
N - Fcosθ
N = Fcosθ
f = μFcosθ,
μFcosθ = Fsinθ
μ = sinθ/cosθ
Given by is the maximum (or critical) angle.
[tex]\theta_m_a_x = arctan\mu_s = arctan(1.2) = 50^0[/tex]
Learn more about Maximum angle:
https://brainly.com/question/17234359
#SPJ4
Complete question:
Shoes made for the sports of bouldering and rock climbing are designed to provide a great deal of friction between the foot and the surface of the ground. Such shoes on smooth rock have a coefficient of static friction of 1.2 and a coefficient of kinetic friction of 0.90. For a person wearing these shoes, what is the maximum angle (with respect to the horizontal) of a smooth rock that can be walked on without slipping?
The soil sample was contaminated with equal amounts of caesium-137 and
iodine-131
Explain how the risk linked to each isotope has changed between 1986 and 2018
Both isotopes emit the same type of radiation.
Both caesium-137 and iodine-131 emit ionizing radiation, which can damage living tissue and increase the risk of cancer.
What are isotopes?Isotopes are members of the same element's family but have variable numbers of neutrons despite having the same number of protons.
Iodine-131 and caesium-137 both produce ionizing radiation, which can harm living things and raise the risk of cancer.
Due to their varied half-lives and processes of decay, each isotope's danger has changed between 1986 and 2018 despite this.
Caesium-137 degrades gradually over time since it has a longer half-life of roughly 30 years. Iodine-131, on the other hand, degrades swiftly because of its significantly lower half-life of only around 8 days.
Thus, the risk has diminished over time as a result of radioactive decay.
For more details regarding isotopes, visit:
https://brainly.com/question/11680817
#SPJ9
What is the sum of kinetic and potential energy?
Answer:
Kinetic energy plus potential energy equals total mechanical energy. The equation for this is KE + PE = Total Mechanical Energy, where KE is kinetic energy, PE is potential energy, and Total Mechanical Energy is the total amount of energy present.
a bicycle wheel has a diameter of 74.6 cm and a mass of 0.758 kg. the bicycle is placed on a stationary stand on rollers and a resistive force of 95.7 n is applied to the rim of the tire. assume all the mass of the wheel is concentrated on the outside radius. in order to give the wheel an acceleration of 2.6 rad/s 2 , what force must be applied by a chain passing over a sprocket with diameter 8.38 cm? answer in units of n.
Force applied by a chain passing over a) is 854 N and force is required if the chain shifts to a 8.38 cm is 869N.
A) The expression for force is product of force and distance of force from the axis of rotation,
τ = r x F
Here sum of clock wise moments are negative and sum of anticlockwise moments are positive,
τ = r x Fa
τnet = r x Fa - R x F
Torque is product of inertia and angular acceleration,
I∝ = r x Fa - R x F
[tex]F_a = \frac{I\alpha + R*F_r_e_s}{r}[/tex]
Moment of inertia of wheel is,
I = MR²
= (0.758)(0.746)
= 0.565 kg.m³
Fa = 854 N
B) using the equation,
[tex]F_a = \frac{I\alpha + R*F_r_e_s}{r}[/tex]
= [tex]\frac{(0.565) (2.6) + (95.7)(0.746) }{0.0838}[/tex]
= 869N
Newton's alternate law establishes that the net necklace acting on a body equals the product of the body's moment of indolence and its angular acceleration,
The moment of indolence serves as a measure of the body's resistance to a change in its rotational state of stir.
Learn more about Force applied:
https://brainly.com/question/15721542
#SPJ4
