A 2000 W immersion heater is used to heat 2 kg of water for 5 minutes. Calculate the final temperature of the water if its initial temperature was 23°C. What assumption have you made in your calculation? Specific heat capacity of water is 4200 J/(kg °C).​

Acid rain is the result of pollutants being released into the air

Acid rain is defined as rain or any other type of precipitation that is unusually acidic, which means it contains a lot of hydrogen ions. Acid rain has a pH level that is lower than this and typically ranges from 4-5. Most water, including drinking water, has a neutral pH that exists between 6.5 and 8.5.

When gases like sulphur dioxide and nitrogen oxides are released into the atmosphere, a chemical reaction takes place that eventually results in acid rain. These substances have the capacity to ascend to extremely high altitudes in the atmosphere, where they combine and interact with oxygen, water, and other chemicals to create acid rain, a type of ozone-depleting haze.

Learn more about Acid rain here:

https://brainly.com/question/22143130

#SPJ4

According to his third law, there is a equal and opposite response to every force (activity) in nature. If object A applies a force to object B, b will respond with an equal and opposing force.

Newton's Third Law illustration Everyday life is full of instances of Newton's third rule of motion. For instance, when you leap, the force from your legs pushing against the ground is balanced by the opposite reaction force from the earth, which lifts you into the air. When creating rockets and other projectiles, engineers use Newton's third law.

The third law of movement by Newton states that equal but diametrically opposed energies always act in pairs. There is an opposite but equal reaction to every action, to put it another way. This means because when you push against a wall, the ceiling pushes back against you with an equal amount of force.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

The 12 universal laws are said to represent the underlying, unchangeable rules of our cosmos, which have always been instinctively understood by earlier civilizations.

Just one of the 12 fundamental laws, the rule of attraction can help us live lives that are more in harmony with our spiritual self by teaching us the other universal laws.

A traditional Hawaiian meditation performed to seek release, is commonly mentioned in connection with the rules. The hermetic philosophy of ancient Egypt has also been connected to some of the rules, though and "universal law".

Kaiser, Kumar, and several other individuals from all around the world continue to utilize the list of antiquated laws, demonstrating how well it has stood the test of time. The guidelines, according to Kaiser, are all about managing your life with love and joy.

To know more about laws on

https://brainly.com/question/28819655

#SPJ4

It will take 5x105 seconds to get to this pace.

Speed refers to the rate at which a length varies over time. It has a time-distance dimension. The outcome is the High silica element of speed, which combines the fundamental time units and the fundamental measure of length. As a result, the SI unit for velocity is the metre per second, or m per s.

Velocity is the term for the rate of movement. The measurement of a velocity shift called acceleration. Given that it includes both magnitude and direction, it is a vector quantity. Due to the fact that it determines how quickly velocity changes, acceleration is just a vector quantity.

To know more about Speed visit:

https://brainly.com/question/28224010

#SPJ1

The melting point of impure substance is slightly lower than the melting point of the pure substance.

Melting point of a substance is that temperature at which substance begins to melt. In other words, the temperature at which the distance between the molecules of the substance begins to increase. When a substance is a mixer of two or more substance, then its called impure substance. Different type of substances have different coefficient of thermal expansions and different melting point.  So they begin to melt at slightly lower temperature than the melting point of one of the substance, This is due to the uneven expansion of the substance at the same temperature.

To know more about melting point, here

https://brainly.com/question/29578567

#SPJ4

Distance from the base to cliff does it land is 41.4m,

Given data :

Let’s review the 4 basic kinematic equations of motion for constant acceleration (suggest you commit these to memory):

s = ut + ½at^2 …. (1)

v^2 = u^2 + 2as …. (2)

v = u + at …. (3)

s = (u + v)t/2 …. (4)

where s is distance, u is initial velocity, v is final velocity, a is acceleration and t is time.

First, we find the time taken by the projectile to drop 84m. From equation (1):

84 = 0 + 0.5(9.81)(t^2) so t = √(84/4.905) = 4.14s

Next, we find the distance travelled in 4.14s at 10m/s, which is:

Distance = 4.14*10 = 41.4m

Completed question :

A projectile is thrown horizontally off of a 84 m high cliff at 10 m/s. How far away from the base of the cliff does it land?

Learn more about distance refer to :

https://brainly.com/question/26550516

#SPJ1

Answer:

I’d say the air outside the hemisphere is more free than from the inside of the hemisphere.

Explanation:

hope this help!

As the plates separate from one another, the transform boundary is described. Assume that two crusts are present and that they exactly line up from east to west. A plate drifts north, away from another plate.

The transform fault, a third type of plate boundary, allows plates to slide past one another without creating or destroying crust. Rocks facing each other on two sides of the fault are typically of different type and age because they are cut and displaced by movement in the opposite direction.

Two plates collide at the transform plate boundary when they slide past one another horizontally. The San Andreas Fault, which causes a large number of earthquakes in California, is a well-known transform plate boundary.

To know more about transform boundary visit:

https://brainly.com/question/13311455

#SPJ4

Newton's first law, also known as the law of inertia, states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity unless acted upon by an unbalanced force. In other words, it states that an object will remain in a state of constant velocity unless acted upon by a net external force.

Inertia, on the other hand, is the property of an object that resists a change in its state of motion. It is the tendency of an object to maintain its current state of motion (i.e. at rest or in motion) unless acted upon by an external force. Inertia is a fundamental concept in physics and is closely related to Newton's first law.

So in summary, Newton's first law is a statement about the behaviour of an object in motion and the relationship between force and motion, while inertia is a property of an object that describes its resistance to a change in motion.

Learn more about Laws of Inertia here: https://brainly.com/question/18128368

#SPJ4

Answer:

they are kinda the same.

One example of Newton's third law is when a person pushes against a wall.

The person exerts a force on the wall, and the wall exerts an equal and opposite force back on the person. Another example is when a baseball is hit with a bat.

The bat exerts a force on the baseball, causing it to move forward, and the baseball exerts an equal and opposite force back on the bat, causing it to move in the opposite direction.

The same applies to the action of a rocket taking off from the ground. The rocket exerts a force on the exhaust gases, pushing them out the back of the rocket and causing the rocket to move forward, and the exhaust gases exert an equal and opposite force back on the rocket, propelling it upward.

To learn more about Newton's 3rd law at

https://brainly.com/question/14967902?referrer=searchResults

#SPJ4

Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable.

Molecules can enter and depart cells by active transport and diffusion, respectively. Water can move into or out of cells via osmosis. When chemicals pass via certain transport proteins and diffuse across the cell membrane, this happens. In probability theory and statistics, a class of continuous-time Markov processes known as diffusion processes is one that almost surely has continuous sample routes. Diffusion is utilised to move molecules across cell membranes and into regions with higher concentrations. Every cell has a cell membrane, which is only partially permeable. Brownian motion, Ornstein-Uhlenbeck processes, and reflected Brownian motion are a few examples of diffusion processes.

Learn more about molecules here

https://brainly.com/question/19922822

#SPJ4

Dimension of a physical quantity are the power to which the basic dimension are raised to quantify that quantity. On the other hand, dimension formula is how and which basic quantities are included to represent the magnitude of the quantity.

Lets say we have a physical quantity "work". As the unit of work is joule which is equal to the kg-m²/s². This is the dimension of the work. But its dimension formula will be [ML²T⁻²].

As the formula of work is F × d × Sinθ.

[MLT⁻²]  is the dimension formula of force

[L] is the dimension of displacement

So, work's dimension formula will be [MLT⁻²] ×[L] = [ML²T⁻²]

To know more about physical quantity, here

https://brainly.com/question/26171158

#SPJ4

The student is producing an output power of 6.43 Watts over the 7 second duration.

Force is an influence that causes an object to change its motion, direction, shape, or other physical qualities. Forces can be caused by physical contact, or they can be created by fields like gravity and magnetism. Forces can also be internal, such as the forces of friction, tension, and compression.

The power output by the student can be calculated using the equation Power = Force x Distance/Time. In this case, the power output is equal to 19 x 5 / 7 = 6.43 Watts. This means that the student is producing an output power of 6.43 Watts over the 7 second duration.

To know more about force click-
https://brainly.com/question/12785175
#SPJ4

T is equal to F r sin. T is a torque. the linear force F. r is the measurement of the distance between the spin axis to the point at which a linear force is applied. torque

Torque is a twisted or twisting force that frequently results in rotation around in an axis, which may be a fixed point or the center of mass. The capacity of something spinning, such as a cog or a shafts, to resist turning resistance is another way to think of torque.

Although a capital "T" is typically used to represent torque, the true sign is indeed the Greek letter omega, or "." The letter "M" is used to denote torque when it is alluded to as a second of force.

To know more about torque visit:

https://brainly.com/question/28220969

#SPJ4

Yes, 5G outperforms 4G in terms of connected consumers in a constrained area. quickly connected and over a network. Undoubtedly, a 5G phone will function on a 4G network.

Because a recent network upgrade just occurred. The fifth-generation technological standard used by the telecom sector is referred to as "5G." Along with other network technologies, the 5G mobile phone also supports 4G, 3G, and 2G. Despite the fact that 5G might be regularly utilised in the current 4G network environment, the experience is not as cool as 5G. 2019 saw the global rollout of broadband cellular networks by cellular phone operators. These networks support the first commercially available 5G mobile phone that supports 5G+4G dual-card dual-standby at the same time.

Learn more about network here

brainly.com/question/7600281

#SPJ4

There are several applications that require low latency, including: online gaming, virtual reality, video conferencing etc.

Online gaming: Low latency is important for online gaming because it ensures that the player's actions are quickly and accurately reflected on the other players' screens.

Financial trading: High-frequency trading requires low latency to ensure that trades are executed quickly and accurately.

Virtual reality and augmented reality: Low latency is important for these technologies to ensure that the virtual world is in sync with the user's movements, providing a more realistic experience.

Video conferencing: Low latency is important for video conferencing to ensure that the audio and video are in sync and that there is no lag in the conversation.

Autonomous vehicles: Low latency is essential for self-driving cars to ensure that they can respond quickly and safely to their environment.

Streaming services: Low latency is essential for streaming services to ensure that users receive a smooth and uninterrupted experience.

These are just a few examples of applications that require low latency. In general, any application that involves real-time communication or control will require low latency to function properly.

To know more about low latency click here:

https://brainly.com/question/29781666#

#SPJ4

A parallel-plate capacitor's energy is given as it is halved. in this case, Option C is correct.

Where are the capacitor battery's capacitance and emf?

a = U = 1 CUR

Capacitance is known to be equal to C and CRA. Capacitance = d = ac 2 Eu A = and the new capacitor's expat energy = U = clu2 = 2002 are calculated when the space between the plates is cut in half. 2 20 01 = 20. The energy of the capacitor doubles as a result.

Does the battery contain a capacitor?

A battery is an electronic device that transforms chemical energy into electrical energy to provide a static electrical charge for power, whereas a capacitor is an electronic component that stores electrostatic energy in an electric field.

To learn more about capacitor's energy  here:

brainly.com/question/13615988

#SPJ4

Cosmic microwave background radiation (CMB) was discovered by American physicists Arno Penzias and Robert Wilson in 1964.

To lean more about radiation refer:

brainly.com/question/893656

#SPJ4

The upper test of 0.0414 is the p-value obtained from this test statistic.

P1P1 = P2P2

The above is the null hypothesis

The two-sided alternative hypothesis is:

P1P1 [tex]\neq[/tex] P2P2

"\=/" stands for "not equal".

Use the Z-Table or Z-Calculator to derive the p-value (probability value) for a Z-score of 2.04.

In the upper test,

2 × [probability z>2.04] = 2[0.0207] = 0.0414

This is the p-value for the test statistic.

The focus is on the alternative hypothesis.

So, final answer is that the upper test of 0.0414 is the p-value obtained from this test statistic.

Learn more about hypothesis

brainly.com/question/896413

#SPJ4

By transferring compute tasks to local devices, such as smartphones and laptops, rather than the cloud, edge computing minimises latency for end users.

With edge computing, customers may leverage their devices as a reliable computational resource at scale in addition to increasing agility and cost-effectiveness. Here are some ways that edge computing has made it such that consumers experience less latency.

There are several brand-new difficulties facing organisations in the era of big data. One significant obstacle is latency. Companies must analyse data more quickly as they gather more of it and store it in their systems. They must thus keep more data nearby their users. You may act more quickly the closer the data is. Making data more accessible to people through computers is one way businesses may reduce latency.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

If a ball i thrown horizontally from the roof of a building 55 m tall with a speed of 3. 8 m/ so the ball will land 55 m away from the building.

Speed is the rate at which something moves or occurs. It is usually measured in terms of distance over time. Speed can be expressed in many different forms, including miles per hour (mph), kilometers per hour (kph), meters per second (m/s) and even in terms of the speed of light. Speed is a measure of how quickly something moves in a specific direction.

The ball will land 55 m away from the building. This is because the horizontal velocity of the ball is 3.8 m/s, and the time it takes to travel 55 m is 55/3.8 = 14.47 seconds. Since the ball was thrown horizontally, it will travel a horizontal distance equal to the time it took multiplied by the velocity, which is 14.47 * 3.8 = 55 m.

To learn more about speed

https://brainly.com/question/13943409

The combined water and melted ice temperature is 31.15°C.

We can use the following formula:

q = m c T is used to calculate the final temperature of the water and melted ice, where:

q = added or lost heat

m = the substance's mass

c = the substance's specific heat capacity

T = temperature change

Finding the heat that the ice has taken away:

(20g) x (2.1 J/g°C) x (0 - (-20))°C = q

q = 8400 J

Identifying the heat gained by water:

(180g) x (4.18 J/g°C) x (T) = q

Taking the heat lost by ice and converting it to the heat gained by water

(180g) x (4.18 J/g°C) x (T) = 8400 J

Trying to find T

T = 8400 J/(180g x 4.18 J/g°C).

ΔT = (8400/756)°C = 11.15°C

We get the final temperature by adding the initial temperature of the water to the temperature change.

T(f) = 20°C + 11.15°C = 31.15°C

As a result, the combined temperature of the water and melted ice is 31.15°C.

Learn more about specific heat capacity at : https://brainly.com/question/29766819

#SPJ4

For the first bullet, kinetic energy is 480 J and for the second bullet, kinetic energy is 1920 J.

Kinetic energy is the energy possessed by an object or a particle due to its motion. It is the energy of motion and can take many forms, such as the energy associated with an airplane flying through the air, a ball rolling down a hill, a person running, or a car traveling on a highway. In general, kinetic energy is the energy an object has because of its movement.

The kinetic energies of the two bullets can be calculated using the equation KE = (1/2)mv2, where m is the mass of the object and v is the velocity of the object.

For the first bullet, KE = (1/2)(3.0 g)(40.0 m/s)2 = 480 J.

For the second bullet, KE = (1/2)(3.0 g)(80.0 m/s)2 = 1920 J.

The second bullet has more kinetic energy than the first bullet. The ratio of their kinetic energies is 4:1. This means that the second bullet has four times more kinetic energy than the first bullet.

To learn more about kinetic energy

https://brainly.com/question/25959744

#SPJ4

A drinking straw can be used to draw liquids by following these steps:

Take the drinking straw and place one end into the liquid you wish to drink.

Hold the other end of the straw with your mouth, making sure that your lips create a tight seal around the end of the straw.

Using your mouth, suck the air out of the straw. This action creates a vacuum in the straw which in turn pulls liquid up through the straw and into your mouth.

It's important to note that the drinking straw should be inserted into the liquid to a depth that keeps the liquid level above the end in your mouth to avoid sucking in air bubbles.

The electrostatic force and gravitational force will be one-sixteenth.

Gravitational force:  The force of attraction between any two bodies is

Electrostatic force:  The force of attraction between any two charges is

i.e. both the forces are inversely proportional to distance between them.

So, GF = EF ∝ [tex]\frac{1}{r^{2} }[/tex]

where r = distance between them.

When distance between objects are 1m , Both the forces are inversely proportional to 1.

When distance between objects are 4m , Both the forces are inversely proportional to 16.

So, the New forces becomes 1/16th of the original one.

To know more about forces visit:

https://brainly.com/question/30135363

#SPJ4

The objects in an elastic collision split apart after impact while maintaining all of their kinetic energy. Kinetic energy, often known as the energy of motion, is discussed in more detail elsewhere.

When the ball is not in contact with the ground, the formula h(t+t0)=v0t12gt2 determines the height at time t following the previous bounce at time t0. where v0 denotes the speed shortly before the bounce.

The mass of the red cart, m1, is equal to m1u1 + m2u2 = m1v1 + m2v2.

The blue cart has a mass of m2.

The red cart's starting speed is u1.

The blue cart's starting speed is u2.

The red cart's ultimate speed is v1.

The blue cart's ultimate speed is v2.

The final speed of each cart is determined by the formula: v1 = [m1u1 + m2u2 - m2v2] / m1

m1u1 + m2u2 - m1v1 = v2 / m2

As m1 = m2, our new equation is: v1 = u1 + u2 - v2.

v₂ = u₁ + u₂ - v₁

To learn more about collision refer to:

https://brainly.com/question/7221794

#SPJ4

Using the CDN, the latency can be reduced as much as possible.

Using CDNs, the distance between the client making the request and the server responding to that request plays an important role. A CDN (Content Delivery Network) allows you to bring your resources closer to your users by caching them in multiple locations around the world. Network administrators have many tools to choose from for this, including Ping, Traceroute, and My Traceroute (MTR) which will cause the latency to reduce. Another thing this movie has in common with the quest for zero-latency monitoring is that both are myths. "Zero Latency" is just a marketing slogan someone came up with to get you to buy an audio interface.

Learn more about the latency in

https://brainly.com/question/29497697

#SPJ4

The magnitude of 2i 3j 4k is 5.38 unit.

Magnitude is simply "distance or quantity" in physics. This representation can be used to show the motion of an item in absolute or relative terms, as well as its size change. It's a descriptive term for something's size or scope. Magnitude is a term used to describe length or size in physics.

To find the magnitude of a vector in three dimensional space, we can use this following formula:

∥a∥ = √ (x² + y² + z²)

In this case, we are given that:

X = 2, Y = 3, and Z = 4

Thus, the magnitude of the vector is:

∥a∥ = √ (2² + 3² + 4²)

∥a∥ = √29

∥a∥ = 5.38

To learn more about magnitude, click here:

https://brainly.com/question/30016405

#SPJ4