Answer:
The total kinetic energy before accelerating = 750 JThe total kinetic energy after accelerating = 3,000 JTotal work done = 2,250 JExplanation:
Given:
Mass of bicyclist = 50 kg
Mass of bicycle = 10 kg
Initial velocity (u) = 5 m/s
Final velocity (v) = 10 m/s
Find:
(a) What was the total kinetic energy before accelerating = ?
(b) What was the total kinetic energy after accelerating = ?
(c) How much work was done to increase the kinetic energy of the bicyclist = ?
Computation:
Total mass (M) = 50 kg + 10 kg = 60 kg
1. The total kinetic energy before accelerating = 1/2[Mu²]
The total kinetic energy before accelerating = 0.5[(60)(5)²]
The total kinetic energy before accelerating = 750 J
2. The total kinetic energy after accelerating = 1/2[Mv²]
The total kinetic energy after accelerating = 0.5[(60)(10)²]
The total kinetic energy after accelerating = 3,000 J
3. Total work done = Δ K.E
Total work done = 3,000 J - 750 J
Total work done = 2,250 J
A non-uniform rod 60cm long and weighs 32N is balanced at the 45cm mark. A load of 2N is hung on the zinc rod at the 25cm mark. Where must a second knife-edge be placed to balance the zinc rod horizontally
Answer:
The second knife-edge must be placed 46.2 cm from the zero mark of the rod.
Explanation:
From the law of equilibrium, ΣF = 0 and ΣM = 0.
Let R be the reaction at the knife edge. Since the weight of the rod and zinc load act downward, and we take downward position as negative
-32 N - 2 N + R = 0
-34 N = -R
R = 34 N
Also, let us assume the knife-edge is x cm from the zero mark. Taking moments about the weight and assuming the knife-edge is right of the weight of the rod. Taking clockwise moments as positive and anti-clockwise moments as negative,
-(45 - 25)2 + (x - 45)R = 0
-(20)2 + (x - 45)34 = 0
-40 = -(x - 45)34
x - 45 = 40/34
x - 45 = 1.18
x = 45 + 1.18
x = 46.18 cm
x ≅ 46.2 cm
The second knife-edge must be placed 46.2 cm from the zero mark of the rod.
Prove that the acceleration due to gravity is independent to
the mass of the falling body
Answer:
The force of gravity on an object increases with its mass; thus, the acceleration of gravity is constant.
Explanation:
one can prove this by plugging in values to Newton's 2nd law equation
F = ma, or by using the formula to calculate the force of gravity.
Force of Gravity = GMm/r^2
with G being the gravitational constant, M the mass of the earth, m the mass of the falling body, and r the distance from the earth's center.
Force of Gravity can be written as mg, with g being the acceleration due to gravity.
As we can see, m cancels on both sides, leaving
g = GM/r^2
Generally in physics problems, r will be treated as constant to achieve
g = 9.8m/s^2
Does thermal energy flow from warmer objects to cooler objects
Answer:yes
Explanation:
Thermal energy is the sum of all kinetic and potential energy in a substance. He is the thermal energy that flows from a warmer object to a cooler object.
heat is the thermal energy that flows from warmer objects to cooler objects. heat only flows one way, from warmer to cooler objects. net heat transfer ends when two objects reach the same temperature. (thermal equilibrium)
Diagram shows the heating
curve for 0.5 kg heated by a
100 W immersion heater. What
is the specific heat capacity of
the liquid?
Answer: 35
Explanation:
Given the following :
M = 0.5 kg
Power of heater = 100W
From the graph ;
Time (t) = 7seconds
Change in temperature(Dt) = t2 - t1
Where t2 = 70°C, t1 = 30°C
Dt = (70 - 30)°C = 40°C
Recall Q = iVt
IV = power
Q = mcDt
c = specific heat capacity of liquid
mcDt = ivt
mcDt = power × t
0.5 × c × 40°C = 100 × 7
20°C × c = 700 J
c = 700 J/ 20°C
c = 35 J / kg°C
what is the defination o
f temperature
Answer: The degree or intensity of heat present in a substance or object, especially as expressed according to a comparative scale and shown by a thermometer or perceived by touch.
describe three factors that influence the location of rural settlement
Explanation:
presence of food, water ,etc
Explanation:
here is five all you have to do is just pick
someone pls help me this is due today!!!
Answer:
a. 6 A
b. 3 V
Explanation:
a. By using Kirchoff's Junction Rule, which states that the current flowing into a junction must equal the current flowing out of it. As you can see in the first 3-way split, the current splits into 3A, 2A, and 1A. This means that when the 3 wires rejoin, the current must have a magnitude equal to the total of the current flowing in all 3 branches, which would equate to 3+2+1 = 6 A.
b. Voltage differences across branches of a parallel circuit are identical. This means that we can treat the 3 resistors as one, and say that the voltage drop across that whole area is 3 V. Since that is the only voltage drop in the circuit, the battery's voltage drop must also be 3 V to equate to it. This is explained by Kirchoff's Loop Rule.
a motorcar is moving with a velocity of 108 km / h and it takes 4s to stop after the brakes are applied calculate the force exerted by the brakes on the motorcar if it's mass along with the passengers is 1000 kg
Answer:
-7500 N
Explanation:
v₀ = 108 km/h = 30 m/s
v = 0 m/s
t = 4 s
a = Δv / Δt
a = (0 m/s − 30 m/s) / 4 s
a = -7.5 m/s²
F = ma
F = (1000 kg) (-7.5 m/s²)
F = -7500 N
Answer:-7500
Explanation v₀ = 108 km/h = 30 m/s
v = 0 m/s
t = 4 s
a = Δv / Δt
a = (0 m/s − 30 m/s) / 4 s
a = -7.5 m/s²
F = ma
F = (1000 kg) (-7.5 m/s²)
F = -7500 N
A rocket is launched from atop a 101 foot cliff with an initial velocity of 116 ft/s.
\a. Substitute the values into the vertical motion formula h(t) = -16t2 + vt + h0 . Let h(t) = 0
b. How long will the rocket take to hit the ground after it is launched? Round to the nearest tenth of a second.
Answer:
A. 16t2 -116t -101=0 B. 8.0s
Explanation:
Known parameters from the question:
Height of Cliff,h0 = 101ft
Velocity of rocket ,v= 116ft/s.
1.Substituting the above to the above formula we have;
h(t) = -16t2 + vt + h0
Since h(t) =0, it means the rocket is falling towards the ground, when it gets to the ground when it's at rest the height h(t) = 0m
{Note the rocket is launched from the height of the Cliff so that would be the initial height of the rocket,h0}
2.Substituting into h(t) = -16t2 + vt + h0
We have;
0 = -16t2 + 116t + 101=> 16t2 -116t -101=0
Using formula method for solving quadratic equation we have;
t = -(-116)+_√[(-116)^2 -( 4× 16 ×-101]/ (2× 16)
t = [116 +_(141.1382)]/32
t = (116 -141.1382)/32 or (116 +141.1382)/32
-0.786s or 8.036s
-0.8s or 8.0s to the nearest tenth.
Now time cannot be negative in real life situation hence the time is 8.0s
Note : the general equation of a quadratic equation with variable t is given below;
at2 + bt + c=0
Formula method for quadratic equation is :
t =( -b+_√[(b^2 -( 4× a×c)] ) / (2× a)
A negative test charge experiences a force to the right as a result of an electric field. Which is the best conclusion to draw based on this description?
a.The electric field points to the left because the force on a negative charge is opposite to the direction of the field.
b.The electric field points to the right because the force on a negative charge is in the same direction as the field.
c.No conclusion can be drawn because the sign of the charge creating the field is unknown.
d.No conclusion can be drawn because the amount of charge on the test charge is unknown.
OPTION B IS THE ANSWER
Answer:
The real answer is A 2023 answer -_-
Explanation:
Calcula el trabajo que realiza la fuerza de fregamiento sobre un cuerpo de 13kg que es desplaza una distáncia de 46 m si el coeficiente de fregamiento entre las superficies es de 0,45
Answer:
Los datos que tienes son:
m = 13 kg
d = 46 m
∪ = 0,45
g = 9,8 m/s²
Fr = ?
w = ?
Lo primero que haremos que calcular Fr
Fr = ∪mg
Fr = (0,45) (13 kg) (9,8 m/s²)
Fr = 57,33 N
Calculamos el trabajo realizado.
w = Fd
w = (57,33 N) (46 m)
w = 2637,18 Joules
Respuesta.
El trabajo realizado es 2637,18 Joules
Explanation:
3 The atmospheric pressure on a particular
day was measured as 750 mmHg.
Express this in nm-2? ( Assume densityof
mercury is 136ookgm3 and g =10Nkg-1'?
Answer:
102000N/m2
This is the same as 102KN/m2 (where K = 10^3):
Explanation:
The expression 750 mmHg means 750 height the atmospheric pressure will cause mercury to be suspended due to gravity.
If we brought another fluid under investigation under the influence of the atmospheric pressure the height would be different)
Note that 750 mmHg would be the same as 750/1000 m Hg ( when we convert the mm to m)
0.75mHg
Now to get the pressure in N/m2.
We multiply the height of mercury by the density by the acceleration due to gravity.
This is expressed mathematically thus;
H×d × g ; let d- denote density
Hence we have;
H×d × g = 0.75 × 13600 × 10= 102000N/m2;
Now let's look at the flip.side assuming you don't know the formula for what you require you could use the idea of Unit derivation ;
The unit of interest is N/m2
The unit of height is m
The unit of density is kg/m3
The unit of g is Nkg-1
We would observe if we multiply
m × N/Kg × Kg/m3
We would have (m× N × Kg)/(kg×m3)
Kg cancels out, m cancels out one m from me remaining m2.
Hence our unit becomes N/m2
Note : the unit for density is wrongly expressed remember density is Mass/ volume and their units are respectively kg/m3
The atmospheric pressure on a particular day was measured as 750 mm of Hg. this would be in 102000 N/m² ( By Assuming the density of
mercury is 13600 kg/m3 and g =10Nkg-1
What is pressure?The total applied force per unit of area is known as the pressure.
The pressure depends both on externally applied force as well the area on which it is applied.
The mathematical expression for the pressure
Pressure = Force /Area
the pressure is expressed by the unit pascal or N /m²
As given in the problem The atmospheric pressure on a particular day was measured as 750 mm of Hg.
Atmospheric pressure is measured by the formula
P = ρgh
where ρ is the density of the mercury
g is the acceleration due to gravity
h is the height of the liquid
By substituting the respective values
P = 13600*10*(750/1000)
P = 102000 N/m²
Thus, the atmospheric pressure would be 102000 in N/m².
Learn more about pressure here
brainly.com/question/28012687
#SPJ2
An electric kettle is rated at 2kW. How much energy is transferred in 30s?
Answer : 60,000 Joule
✑ Given :
Power = 2 KW = 2 × 1000 W = 2000 W ( since 1 KW = 1000 W )Time taken = 30 seconds✑ To find :
Energy☞ Solution :
✾ Energy = Power × Time ✾
= 2000 × 30
= 60,000 Joule
Hope I helped!
ツ Have a wonderful day / night !♡
~TheAnimeGirl ♪
Answer:
60,000 Joules
Explanation:
GIVEN:
Power = 2kW = 2000 W
Time = 30 sec
REQUIRED:
Energy = ?
SOLUTION:
Power = Energy / Time
Making Energy the subject of formula
Energy = Power × Time
E = 2000 W × 30 s
E = 60,000 Joules
Which of Galileo's theories drew fire from the Catholic Church and led to his
house arrest?
Answer:
imma have to come back to you on that one
Answer:
The Sun is at the center of the solar system and the planets move around it.
Explanation:pluto/edmentum
which of the following terms describes a machine that converts heat into work?
A. Entropy pump
B. Heat engine
C. Heat pump
D. Entropy engine
Answer: A
Heat engine
Explanation: just took the test
iv. The lift raises a car of mass 850 kg to a height of 2.1 m. It uses a force of 8330 N and takes 4 seconds to raise the car. What is the power of the lift? (1 point)
Answer:
Power is 4373.25 W
Explanation:
We have,
The lift raises a car of mass 850 kg to a height of 2.1 m. It uses a force of 8330 N and takes 4 seconds to raise the car. It is required to find the power of the lift. Power is equal to the rate at which the work is done. So,
[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{8330\times 2.1}{4}\\\\P=4373.25\ W[/tex]
So, the power of the lift is 4373.25 W.
True or false. When populations do not exceed their environment carrying capacity biology communities are stable?
Answer:
True
Explanation:
How did Einstein’s and Newton’s theories differ in terms of explaining the cause of gravity?
Newton's law of universal gravitation doesn't say anything about the cause of gravity.
Einstein's theory of relativity does.
A 45-gram object that has a volume of 9 mL has a density of
a. 5 g/mL
b. 54 g/mL
c. 36 g/mL
d. 405 g/mL
Answer:
The answer is a. 5g/mLExplanation:
Given data
mass m= 45g
volume v= 9mL
we know that density=m/v
substituting our given data we have
[tex]density=\frac{45}{9} =5g/mL[/tex]
What is Density?
The Density of a body can be defined as the ratio of mass to volume,
or
Density, mass of a unit volume of a material substance. The formula for density is [tex]Density= \frac{mass}{volume}[/tex],
where d is density,
M is mass, and
V is volume.
Density is commonly expressed in units of grams per cubic centimetre.
What happens to a sound wave as air temperature decreases?
A. The wave returns to rest a position
B. The wave’s speed decreases
C. Air particles push harder on the wave
D. The waves speed increases
Answer:
Explanation:
goes down as the temperature decreases, and vice versa. Sound's frequency is independent of temperature, while its speed is directly proportional to temperature. Heat, like sound, is a form of kinetic energy. Molecules at higher temperatures have more energy, thus they can vibrate faster. Since the molecules vibrate faster, sound waves can travel more quickly. ... This is faster than 331 meters per second, which is the speed of sound in air at freezing temperatures.
hope this helps!!!!
Sound waves travel more fastly in hot air , since particles in atmosphere gets more energetic in higher temperature. Hence, as the temperature decreases, the wave’s speed decreases.
What is sound waves ?Sound waves are mechanical waves passing through a medium. Sound waves are longitudinal where, the oscillation of particles is along the direction of wave propagation.
Compression waves, which at a microscopic scale rely on molecules transmitting energy one to another, are used to convey sound through the air.
Higher temperatures produce more energetic air molecules, which vibrate more rapidly. As a result of the molecules colliding with one another, the sound waves can move more quickly.
Therefore, as the temperature decreases, the speed of sound wave decreases. Thus, option B is correct.
Find more on sound waves:
https://brainly.com/question/21995826
#SPJ2
A helium ion of mass 4m and charge 2e is accelerated from rest through a potential difference V in vacuum. Its final speed will be
Answer:
Final Velocity = √(eV/m)
Explanation:
The Workdone, W, in accelerating a charge, 2e, through a potential difference, V is given as a product of the charge and the potential difference
W = (2e) × V = 2eV
And this work is equal to change in kinetic energy
W = Δ(kinetic energy) = ΔK.E
But since the charge starts from rest, initial velocity = 0 and initial kinetic energy = 0
ΔK.E = ½ × (mass) × (final velocity)²
(Velocity)² = (2×ΔK.E)/(mass)
Velocity = √[(2×ΔK.E)/(mass)]
ΔK.E = W = 2eV
mass = 4m
Final Velocity = √[(2×W)/(4m)]
Final Velocity = √[(2×2eV)/4m]
Final Velocity = √(4eV/4m)
Final Velocity = √(eV/m)
Hope this Helps!!!
What do nuclear fission and nuclear fusion have in common?
A. They start with the same reactants.
B. They're both used in power plants.
C. Their products have more mass than their reactants.
D. Their products have less mass than their reactants.
Answer:
B
Explanation:
Fission and Fission are nuclear reaction processes that releases energy.
Fission is the process where the nuclei of an atom splits into smaller nuclei of same element or elements of smaller nuclei when Fussion is when two smaller nuclei combined to form one of a different element of a higher nuclei. These processes release energy.
Answer:
D. Their products have less mass than their reactants.
Explanation:
Suppose that you walk 15 meters at 30 degrees as measured from the East. Then you walk another 25 meters at 60 degrees from the East what is your net displacement
Answer:
The net displacement is
[tex]R= \sqrt{A^2+B^2+2AB \cos \theta}[/tex]
[tex]=\sqrt{15^2+25^2+2AB \cos 30^\circ} \\\\=\sqrt{225+625+ \cos30^0} \\\\=38.7m[/tex]
Explanation:
Suppose that you walk 15 meters at 30 degrees as measured from the East. Then you walk another 25 meters at 60 degrees from the East what is your net displacement
Given data
A = 15 m
B = 25 m
Angle between the vectors A and B is θ = 30°
The net displacement is
[tex]R= \sqrt{A^2+B^2+2AB \cos \theta}[/tex]
[tex]=\sqrt{15^2+25^2+2AB \cos 30^\circ} \\\\=\sqrt{225+625+ \cos30^0} \\\\=38.7m[/tex]
Explain why a Merry-Go-Round and a Ferris Wheel have a constant acceleration when they are moving.
Answer must be at least two sentences and contain words such as velocity and acceleration.
Explanation:What is centripetal acceleration?
Can an object accelerate if it's moving with constant speed? Yup! Many people find this counter-intuitive at first because they forget that changes in the direction of motion of an object—even if the object is maintaining a constant speed—still count as acceleration.
Acceleration is a change in velocity, either in its magnitude—i.e., speed—or in its direction, or both. In uniform circular motion, the direction of the velocity changes constantly, so there is always an associated acceleration, even though the speed might be constant. You experience this acceleration yourself when you turn a corner in your car—if you hold the wheel steady during a turn and move at constant speed, you are in uniform circular motion. What you notice is a sideways acceleration because you and the car are changing direction. The sharper the curve and the greater your speed, the more noticeable this acceleration will become. In this section we'll examine the direction and magnitude of that acceleration.
The figure below shows an object moving in a circular path at constant speed. The direction of the instantaneous velocity is shown at two points along the path. Acceleration is in the direction of the change in velocity, which points directly toward the center of rotation—the center of the circular path. This direction is shown with the vector diagram in the figure. We call the acceleration of an object moving in uniform circular motion—resulting from a net external force—the centripetal acceleration
a
c
a
c
a, start subscript, c, end subscript; centripetal means “toward the center” or “center seeking”.
18. Which does not affect the strength of an electromagnet?
A the current in the solenoid
B the temperature of the coil
OC the number of loops in the coil
D the type of ferromagnetic core
Answer:
The temperature does not affect the strength of a magnetExplanation:
An electromagnet is obtained by winding an insulated wire round a soft iron rod with the wire ends connected to a DC source. such magnets have temporary magnetic properties which disappears with time as the current supply is cut off.
Furthermore the strength off an electromagnet
increases as current increasesincreases as the number of turns increasesthe type of magnetic core is highly essential as an iron core will do batter than a silver core
You are on an interstellar mission from the Earth to the 8,7 light-years distant star Sirius. Your spaceship can travel with 70% the speed of light and has a cylindrical shape with a diameter of 6 m at the front surface and a length of 25 m. You have to cross the interstellar medium with an approximated density of 1 hydrogen atom/m3 (a) Calculate the time it takes your spaceship to reach Sirius. (b) Determine the mass of interstellar gas that collides with your spaceship during the mission. Note:use 1,673x 10^-27 kg as proton mass
Answer:
Time = 12.43 years
Mass = 4.71.43kg
Explanation:
Given the following :
Distance = 8.7 light years
Speed = 70% the speed of light
Diameter = 6m
Lengtg = 25m
Density = 1 hydrogen atom/m^3
Mass of proton(Me) = 1.673x 10^-27
A.) time it takes your spaceship to reach Sirius :
From the relation: Speed = (distance / time)
Time = distance / speed
Time = (70/100) × 1 light year
Distance = 8.7 light years
Time = 8.7 / 0.7 = 12.4285 years
Time = 12.43 years
B.) Mass of inter-stellar gas that collides with the spaceship can be calcuted by finding the product of the surface area of the cylindrical space ship and the mass of proton.
That is ;
surface area * mass of proton
Surface area of a cylinder = 2πrh + πr^2×Me
= 2πrh + Me×πr^2)
=( 2 × 22/7 × 3 × 25) + (22/7 × 3^2 × 1.673 * 10^-27)
= 2× 235.714 + 28.285) × 1.673 * 10^-27
= 471.428 + 47.31 * 10^-27
= 471.428 + 4.73 × 10^-26
= 4.71.43kg approximately
10) Um viajante, ao desembarcar no aeroporto de Londres, observou que o valor da temperatura do ambiente na escala Fahrenheit é o quíntuplo do valor da temperatura na escala Celsius. Calcule essa temperatura
Answer:
The observed temperature was 10º Celsius or 50º Fahrenheit.
Explanation:
The traveler observed that the temperature in Fahrenheit is five times the value of the temperature in Celsius, therefore:
[tex]F = 5*C[/tex]
A Fahrenheit temperature relates to a Celsius one by the following expression:
[tex]F = \frac{9}{5}*C + 32[/tex]
Using the second expression on the first, we can solve for the temperature in Celsius, this is done below:
[tex]\frac{9}{5}*C + 32 = 5*C\\\frac{9}{5}*C - 5*C = -32\\\frac{9*C - 25*C}{5} = -32\\\frac{-16*C}{5} = -32\\-16*C = -32*5\\-16*C = -160\\C = \frac{-160}{-16} = 10\º\text{C}\\F = 5*C = 5*10 = 50\º\text{F}[/tex]
The observed temperature was 10º Celsius or 50º Fahrenheit.
Who is prime minister of india
His name is
Narendra Modi
Answer:
Hey!
*its kinda the wrong topic but ill answer anyway!!!*
The Prime Minister of India is...
Narendra ModiExplanation:
HOPE THIS HELPS!!
the components and functionality of the event horizon telescope.
Answer:
The Event Horizon Telescope comprises of a an interconnection of radio observatories. These radio observatories work in unison and helps in efficient observation of radio sources associated with black holes with angular resolution in comparison to their event horizons. This equipment functions by ensuring that anything or light which goes through the event horizon cannot escape from the black hole. Instead there will be a continual falling towards the center of the black hole.
How much energy sun release in the form of radiation
Answer: Hope this is right
4 x 10^26 watts every second.
Explanation:
The sun, like all active stars, is a massive hydrogen-burning furnace producing huge amounts of light, heat and radiation, about 4 x 10^26 watts every second.