a balloon of total mass 2200 kg hovers stationary at a height of several meters above the ground. a mass of 200 kg is released from rest from the balloon.calculate the acceleration of the balloon as it starts to rise.

The peak voltage based on the information given will be 1.33V.

From the information given, Coil A has 75 turns and coil B has 100 turns.

The voltage will be:

IVa = IVb

We will then substitute the values. c

V = 100/75

V = 1.33V

Therefore, the peak voltage based on the information given will be 1.33V.

Learn more about voltage on:

brainly.com/question/1176850

#SPJ12

The patient apply pressure to his side of the tube is 15 x 10⁴ N/m². The correct option is D.

The pressure is the amount of force applied per unit area. It is represented as

Pressure p = Force/Area

Given is a doctor has a patient blow on one side of a U-shaped tube that is partially filled with water and has a ball floating on the other side. The ball rises with a force of 150 N. The cross section are of the tube is 0.001 m³

The pressure applied is

p = 150 /0.001

p = 15 x 10⁴ N/m²

Hence, the patient apply pressure to his side of the tube is 15 x 10⁴ N/m².

Learn more about pressure.

https://brainly.com/question/12971272

#SPJ1

(a) The frequency observed by the passenger on the east-bound train when they are 1000 m apart is 675.5 Hz.

(b) After 10 seconds, the frequency observed by the passenger on the east-bound train will be greater than the frequency observed when they are 1000 m apart.

The frequency observed by the passenger on east-bound train is calculated by applying Doppler shift formula.

[tex]f = f_0(\frac{v \pm v_0}{v\pm v_s} )[/tex]

where;

[tex]f = 600(\frac{343 +15}{343-25} )\\\\f = 675.5 \ Hz[/tex]

The frequency observed by the passenger increases with decrease in distance between the two trains.

Thus, after 10 seconds, the frequency observed by the passenger on the east-bound train will be greater than the frequency observed when they are 1000 m apart.

Learn more about Doppler shift here: https://brainly.com/question/23841569

#SPJ1

The kind of investigations might have led to our current understanding of matter and energy is research and measurement.

It is important for scientists to use the same scientific method and consistent measurement units in order to get the correct value while analayzing.

The matter has volume and space occupied.

When conceivable the researcher endeavors to test his speculations via painstakingly planned and controlled tests that will yield quantitative instead of subjective outcomes.

Thus, the kind of investigations might have led to our current understanding of matter and energy is research and measurement.

It is important for scientists to use the same scientific method and consistent measurement units in order to get the correct value while analayzing.

Learn more about matter.

https://brainly.com/question/4513444

#SPJ1

The magnitude of the acceleration that the engine must produce is  0.065 m/s².

Acceleration is given by the ratio of Resultant or total force acting on any object and the its mass.

It can also be defined as the rate change of velocity with time.

acceleration a = (Δv) / (Δt)

Given is a lunar probe is moving 1670 m/s at a 73° angle. it needs to land on the moon  3.71 x 10⁸ m away in a 46° direction in 8.64 x 10⁴ s.

The initial velocity will be

1670 x cos (73°-46°) = 1487.981 m/s

Using the second equation of motion, we have

s = ut + 1/2 at²

The final velocity will be zero after landing on Moon.

Substituting the values, we have

3.71 x 10⁸=  1487.981 x  8.64 x 10⁴ + 1/2 a ( 8.64 x 10⁴)²

Solving the equation, we get

acceleration, a = 0.065 m/s²

Thus, the magnitude of the acceleration that the engine must produce is   0.065 m/s²

Learn more about acceleration.

https://brainly.com/question/12550364

#SPJ1

Answer:

The direction is 30.6

Explanation:

The angular acceleration is 531. 98 rad/s

Using the formula:

Angular acceleration  = change in angular velocity / change in time taken

Angular velocity = 635 rev/ min, covert to rad/ sec

The frequency in radians per second is equal to the revolutions per minute multiplied by 0.10472

Then angular velocity in rad/sec = 635 * 0.10472 = 66. 4972 rad/sec

time = 8. 0s

Substitute into the formula

Angular acceleration = 66. 4972 / 8. 0

Angular acceleration = 531. 98 rad/s²

Thus, the angular acceleration is 531. 98 rad/s²

Learn more about angular acceleration here:

https://brainly.com/question/15393374

#SPJ1

The velocity of a trip from City A to City B is  30 miles per hour.

The term velocity is defined as the ratio of displacement to time. Displacement refers to the distance that is covered in a specified direction.

Now  given that the straight line distance from A to B is about 120 miles. hen it follows that the velocity of a trip from City A to City B is obtained from; 120 miles/ 4 hours = 30 miles per hour.

Learn more about velocity:https://brainly.com/question/18084516?

#SPJ1

Work done by the force is 150 Joules.

Steps involved in the question:

Step one:

Given data

Force F= 10N

the distance is described by the coordinate =  (0,0) to (15,0)

hence the distance = 15m in the x-direction.

Step two:

Required is the work done

we know that work done is expressed as

Wd= Force* Distance

Wd= 10*15

Wd= 150 Joules

To learn more about work done refer : https://brainly.com/question/25573309

#SPJ4

Answer:

The food supply chain comprises all the stages that food products go through, from production to consumption

Explanation:

The potential difference across the ends of a wire is doubled in magnitude. If ohm’s law is obeyed, the resistance is not changed. Thus, option A is correct.

The current is the stream of charges which flow inside the conductors when connected across the end of voltage.

From Ohm's law, V =IR

Here, R is the proportionality constant called the resistance of the resistor.

The complete question is given in the image attached.

The potential difference across the ends of a wire is doubled in magnitude.2V = IRR =2 V/IAs, the resistance is a constant value, it does not change.

The following statements concerning the resistance of the wire true is :

The resistance is not changed

Thus, the correct option is A.

Learn more about current, here:

https://brainly.com/question/13076734

#SPJ1

pluto is best decribed as smallest planet

Plant trees on places where forests have been chopped down to restore damaged ecosystems. Encourage individuals to live in a way that is environmentally friendly. Create parks to conserve the rainforests and animals. Companies that operate in environmentally friendly methods should be supported.

Explanation:

Methane (CH4) is 30 times stronger than carbon dioxide as an absorber of infrared radiation.

Answer:

The main reasons why CH4 has a higher vapor pressure at a given temperature when compared to CH3Cl is that CH4.

And Is 30 Times Stronger than Carbon dioxide...

Explanation:

Hope It Helps!!!

Answer:

chemical energy, Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic

Explanation:

hope it will help you

The speed of the ball after one second is obtained as 9.8 m/s.

We know that  since the ball dropped from a height, its initial velocity is zero.

Thus we have;

u = 0 m/s

v = ???

g =  9,8 m/s²

t =  1sec

Given that;

v = u + at

v = at

v =  9,8 m/s² *  1sec

v = 9.8 m/s

Learn more about acceleration:https://brainly.com/question/12550364?

#SPJ1

Graph A best represents the relationship between pull is doubled, gravity and distance. depends on the mass and the force of gravity. Option A is correct.

Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.

The expression for the gravitational force is given as;

[tex]\rm F = G\frac{Mm}{r^2}[/tex]

Gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.

Decreasing the distance would increase the gravity of the planet.

Gravity is the attraction force that draws two mass-containing objects together. the gravitational distance's strength.

The force of gravity weakens as the distance between the items rises. if the separation is just one-fourth as great as previously. In the graph, the link between pull and doubled is best represented by A.

Hence option A is correct.

To learn more about Newton's law of gravity refer to the link;

https://brainly.com/question/13428472

#SPJ1

Answer:

no

Explanation:

the moon's force of gravity is not strong enough to pull you down compared to earth, so you will just float

Answer:

200 j is kinetic energy of mass

The smallest time interval in which the magnetic field can be turned on or off to induced the emf is 47.5 s.

The emf induced in the coil is calculated as follows;

emf = dФ/dt

where;

0.12 = 5.7/dt

dt = 5.7/0.12

dt = 47.5 s

Thus, the smallest time interval in which the magnetic field can be turned on or off to induced the emf is 47.5 s.

Learn more about emf here: https://brainly.com/question/13744192

#SPJ11

Answer:

none

Explanation:

The blu-ray standard that defines rewritable disks is BD-RE which stands for Blu-ray Disc Recordable.

BD-RE stands for Blu-ray Disc Recordable and it refers to two direct to disc optical disc recording technologies that can be recorded on to a Blu-ray-based optical disc with an optical disc recorder.

Thus, the blu-ray standard that defines rewritable disks is BD-RE which stands for Blu-ray Disc Recordable.

Learn more about blu-ray here: https://brainly.com/question/16794951

#SPJ11

Answer:

added in picture

Explanation:

added in the picture

Answer:

450 ML

Explanation:

Given:

Volume of gas sample: 550 mL Pressure: 1.8 atm plus 2.2 atm

To find:

The new volume of the gas after the pressure increases to 2.2 atm.

___

steps

⇒ [tex]V_1P_1=V_2P_2[/tex]

⇒ [tex](550\text{ml})(1.8\text{atm})[/tex]

⇒ [tex]=(x)(2.2\text{atm})[/tex]

⇒ [tex]x=\frac{(550)(1.8)}{2.2}[/tex]

⇒ [tex]x=450\text{ml}[/tex]

Answer:

V₂ = 450 mL

Explanation:

Because you are dealing solely with pressure and volume, you can use Boyle's Law to find the missing value. The equation looks like this:

P₁V₁ = P₂V₂

In this formula, "P₁" and "V₁" represent the initial pressure and volume. "P₂" and "V₂" represent the final pressure and volume. You have been given values for all of the variables except for "V₂". Thus, you can substitute the given values into the equation and simplify to find the answer. The final answer should have 2 sig figs to match the given values.

P₁ = 1.8 atm                      V₁ = 550 mL

P₂ = 2.2 atm                     V₂ = ?

P₁V₁ = P₂V₂                                               <----- Boyle's Law equation

(1.8 atm)(550 mL) = (2.2 atm)V₂              <----- Plug given values in

990 = (2.2 atm)V₂                                    <----- Multiply 1.8 and 550

450 = V₂                                                  <----- Divide both sides by 2.2

Answer:

[tex]750\; {\rm m\cdot s^{-1}}[/tex].

Explanation:

The distance between two adjacent nodes of a standing wave is equal to one-half (that is, [tex](1/2)[/tex]) the wavelength of this wave.

Let [tex]\lambda[/tex] denote the wavelength of the standing wave in this question. The distance between two nodes of this wave is [tex]0.25\; {\rm m}[/tex], meaning that [tex](1/2)\, \lambda = 0.25\; {\rm m}[/tex]. Thus, [tex]\lambda = 2 \times 0.25\; {\rm m} = 0.50\; {\rm m}[/tex].

Given that [tex]f = 1500\; {\rm Hz}[/tex] is the frequency of the waves that formed this standing wave, the speed of these waves would be:

[tex]\begin{aligned}v &= \lambda\, f \\ &= 0.50\; {\rm m} \times 1500\; {\rm Hz} \\ &= 0.50\; {\rm m} \times 1500\; {\rm s^{-1}} \\ &= 750\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

The way you will know that a figure represents a vector is that it will have magnitude and direction.

A figure that is a vector will typically have magnitude and direction. This means that it will be represented by an arrow(s)  with its' magnitude also showing.

Whereas, on the opposite side, the figure is termed as a scalar if it doesn’t have a direction.

Thus, we can know a vector diagram if the magnitude and direction are indicated.

Read more about Vectors at; https://brainly.com/question/3184914

#SPJ12

Step-by-step explanation:      

Step 1: Formula

10.0 = Meters

800 = Newtons

4.0 = Centre of Gravity

Explanation in words (Short Form)

-  We know all the formulas and that we are calculating the least force being applied. We know that balancing the pole at (A) with the weight of the gravity will equal more force at B times 10. So the answer will be 320 N because the B force will equal 3200. If we divide 3200 by 10. The answer will result as 320. So the final answer for this question is 320N

Answer:  

Balancing the pole at A with the weight acting at the centre of gravity = 800(4) Force at B multiplied by 10 = 3200 divided by 10 equals 320N

= 320N

Hope this helps.

To identify a satirical tone, look for words an author uses to exaggerate a particular character behavior to make that person appear ridiculous to the reader. The statement is True.

What a person thinks upon a situation and get through it makes the character of a person and defines his behavior.

Given is a statement "To identify a satirical tone, look for words an author uses to exaggerate a particular character behavior to make that person appear ridiculous to the reader".

The words used by the person forms the character. So, the author searches for the word which says about his character but the reader finds it ridiculous.

Thus, the statement is true.

Learn more about character.

https://brainly.com/question/3756907

#SPJ1

Answer:

a = 0.5m.s²

Explanation:

Fnet = m×a

50 = 100×a

a = 0.5