If a bicycle tire is spinning clockwise at 2.30 rad/s. the change in the tire’s angular velocity and the tire’s average angular acceleration is: 2.63 rad/s².
How to find the average angular acceleration?Change in angular velocity
Δw = wf -wi
Δw = (2.30 rad/s) - (-2.30 rad/s)
= 4.60 rad/s
w_ is negative because it is in the clockwise direction.
Average angular acceleration:
Average angular acceleration = 4.60 rad/s/ 1.75s
Average angular acceleration = 2.63 rad/s²
Therefore the average angular acceleration is 2.63 rad/s².
Learn more about average angular acceleration here:https://brainly.com/question/29138741
#SPJ1
a sector with central angle is cut from a circle of radius 12 inches (see figure), and the edges of the sector are brought together to form a cone. find the magnitude of such that the volume of the cone is a maximum.
The magnitude of θ such that the volume of the cone is a maximum is 56.58 degrees when a sector with central angle is cut from a circle of radius 12 inches.
Given the radius of circle (R) = 12 inches
Let the central angle (T) = θ
Volume of cone (V) = πr^2h/3
Let the slant height in cone = s
Let the height of cone = h
we know that for the cone, (r) = sT/(2π)
Then h = √(s^2 - r^2)
Therefore, V = π( sT/(2π) )^2√(s^2 - r^2)/3
To maximize V we need to find dV/dT such that dV/dT = 0
dV/dT = d/dT[π( sT/(2π) )^2√(s^2 - r^2)/3]
Let θ = T then dV/dθ = d/dθ[π( sθ/(2π) )^2√(s^2 - r^2)/3]
(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] - (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)]) = 0
(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] = (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)])
θ^2 = 4π^2/(4π^2+1)
θ = 56.58 degrees
Hence the magnitude of θ such that the volume of the cone is a maximum is 56.58 degrees.
To learn more about magnitude click here https://brainly.com/question/29766788
#SPJ4
determine the average force that the fist exerts on the head. ccording to a report on traumatic brain injury, the force that a professional boxer's fist exerts on his opponent's head is equivalent to being hit with a 5.9 kg bowling ball traveling at 8.9 m/s that stops in 0.018 s .
The average force applied to the skull by the fist is 5.9 kg x 498 m/s2, or 2,945 N.
What is force?Force is an action that can cause an object to change its motion and/or shape. It can be an external force, such as gravity, or an internal force, such as friction. Forces can be applied by a single object, such as pushing on a wall, or they can be the result of two objects interacting, such as when two objects collide. Newtons are used to measure force, which is a vector quantity both with magnitude and direction.
F = m x a
formula a = (Vf - Vi) / t
Therefore, the average force that the fist exerts on the head is 5.9 kg x 498 m/s2, which equals 2,945 N.
To learn more about force
https://brainly.com/question/13191643
#SPJ4
which of the following patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km?
The patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km are-
decreasing pressure decreasing densityIn this case, Option B and F are correct.
The atmosphere is what?
The layer of gases that envelops the Earth and other planetary bodies is the atmosphere. It is made up of various gases, including nitrogen, oxygen, and others, as well as vaporized water, dust, and other materials. The atmosphere shields us from harmful solar radiation while also assisting in climate control on Earth. Life on Earth as we know it would not exist without it.You would notice a drop in temperature, an increase in air pressure, and a drop in the amount of oxygen available if you started your journey at sea level and rose through the Earth's atmosphere.As you ascended, you would also notice a reduction in the amount of dust, water vapor, and other atmospheric particulates.To know more about atmosphere click-
brainly.com/question/30157320
#SPJ4
Which of the following patterns would you observe if you started at sea level and traveled upward through the Earth's atmosphere to an elevation of 100 km? Choose one or more:
A. a progressive decrease in temperature
B. decreasing pressure
C. changes from warming trends to cooling trends at distinct boundaries D. increasing pressure
E. increasing density
F. decreasing density
A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a stretched position. If the maximum speed of the object is 2.23 m/s, and the maximum acceleration is 5.77 m/s2, find how much time elapses between a moment of maximum speed and the next moment of maximum acceleration.
(Answer should be in seconds)
Hint: What fraction of a period is the time between the maximum speed and acceleration? How are the maximum speed and acceleration related to the period of oscillation?
The time that elapses between a moment of maximum speed and the next moment of maximum acceleration is 2.43 seconds.
What is the period between maximum speed and acceleration?The time that elapses between a moment of maximum speed and the next moment of maximum acceleration is calculated as follows;
V (max) = 2πfA ------ (1)
a (max) = ( 2πf )² A ------ (2)
where;
f is the frequency of the oscillationA is the amplitude of the oscillationSince both equations have amplitude, A, we will make A the subject of the formula.
A = (V.max) / ( 2πf)
A = (a.max) / ( 2πf)²
(V.max) / ( 2πf) = (a.max) / ( 2πf)²
V.max = (a.max) / ( 2πf)
f = (a.max) / ( 2π x V.max)
Period, T, = 1 / f
T = ( 2π x V.max) / a.max
The period of the oscillation is calculated as follows;
T = ( 2π x 2.23 ) / ( 5.77 )
T = 2.43 seconds
Learn more about period of oscillation here: https://brainly.com/question/20070798
#SPJ1
 A penny is dropped off of the top of the Statue of Liberty, which is 93 meters tall. How long will it take for the penny to hit the ground?
Answer:
About 4.4 seconds
Explanation:
[tex]h=1/2(gt^{2} )[/tex]
[tex]t^{2} =\frac{2h}{g}[/tex]
[tex]t=\sqrt{\frac{2h}{g} }[/tex]
[tex]t=\sqrt{\frac{2(93)}{9.8} } =\sqrt{18.98} =4.36[/tex]
Hope this helps
A spacecraft travels along a straight line from Earth to the Moon. At what distance from Earth does the force of gravity exerted by Earth on the coasting spacecraft cancel the force of gravity exerted by the Moon on the spacecraft? Use the Moon's orbit semimajor axis as a distance between planets. Express your answer to two significant digits and include the appropriate units.
The gravitational force between any two bodies is inversely proportional to the square of the distance between them. The distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force exerted by the Moon on the spacecraft is 384,400 km.
What is a gravitational force?Gravitational force is a natural phenomenon by which all objects with mass attract each other. This force is one of the four fundamental forces of nature, and is the weakest of the four. It is the force that binds us to the Earth and keeps our feet firmly planted on the ground.
Part A: The gravitational force between any two bodies is inversely proportional to the square of the distance between them. Therefore, the force of gravity exerted by Earth on the spacecraft will be equal to the force of gravity exerted by the Moon on the spacecraft when the distance between them is equal to the Moon's orbit semimajor axis.
Part B: The Moon's orbit semimajor axis is 384,400 km. Therefore, the distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force of gravity exerted by the Moon on the spacecraft is 384,400 km.
To two significant digits, the answer is 384,400 km.
To know more about gravitational force, visit
brainly.com/question/12528243
#SPJ4
if the swiss franc is trading at 0.69, and a customer buys 1 sep sf 70 put and writes 1 sep sf 65 put, this position is A) calendar spread.
B) bear spread.
C) diagonal spread.
D) bull spread.
Bear spread was correct!.
What exactly is the bear spread strategy?A bear put spread is made up of one long put and one short put with a higher strike price. Both put options have the same underlying stock and expiration date. A bear put spread is constructed for a net negative (or net cost) and gains as the price of the underlying stock falls. Bear may earn from being correct by selling short stocks or ETFs in the market.
This entails borrowing shares and then selling them in the hopes of buying them again at a reduced price and returning the shares to the lender. Inverse ETFs and mutual funds are also available, which increase when markets fall.The bear call spread makes the most money when the underlying price falls.
To learn more about bear spread to refer:
https://brainly.com/question/20314141
#SPJ1
Two objects are traveling around different circular orbits with constant speed. They both have the same acceleration but object A is traveling twice as fast as object B. The orbit radius for
object A is _____ the orbit radius for object B
A. one-fourth
B. one-half
C. the same as
D. twice
E. four time
The orbit radius for object A is B. one-half the orbit radius for object B
If the velocity only changes in direction (constant speed), then its acceleration has constant magnitude and is called centripetal.
Do elliptical orbits have constant velocities?An orbit that is perfectly balanced and has a constant speed is called a circular orbit. There are countless different elliptical orbits where velocity and speed are variable.
The velocity of an item rotating in a circle at a constant speed changes. This is thus because velocity depends on both speed and direction as a vector variable. Even if its speed is constant, the object in orbit is accelerating because its velocity is changing.
Learn more about acceleration
https://brainly.com/question/460763
#SPJ4
FILL IN THE BLANK it is illegal to follow an emergency vehicle at a distance of_____or to stop within ______ of where an emergency vehicle is responding to an alarm.
It is illegal to follow an emergency vehicle at a distance of less than 500 feet or to stop within 300 feet of where an emergency vehicle is responding to an alarm.
How does maintaining a safe distance from an emergency vehicle enhance the safety of both the emergency vehicle's crew and other drivers on the road?Maintaining a safe distance from an emergency vehicle enhances the safety of both the emergency vehicle's crew and other drivers on the road by providing the emergency vehicle with the necessary space to maneuver and respond quickly to an alarm. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly, and if the vehicle behind is too close, it may not be able to react in time and cause an accident. By maintaining a safe distance, other drivers can react in a timely manner to the emergency vehicle's movements, reducing the risk of collisions and accidents. Additionally, maintaining a safe distance can also help to increase visibility for the emergency vehicle's crew, which can help them to navigate through traffic more safely and quickly. This ultimately contributes to the safety of all parties involved.
This statement is referring to laws and regulations regarding the distance that a driver must maintain from an emergency vehicle that is responding to an emergency call or alarm. Following an emergency vehicle too closely, or stopping too close to where an emergency vehicle is responding to an alarm, can impede the emergency vehicle's ability to respond quickly and safely.
It is illegal to follow an emergency vehicle at a distance of less than 500 feet because this distance is considered to be too close and can pose a safety hazard to the emergency vehicle and its crew. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly and if the vehicle behind is too close, it may not be able to react in time and cause an accident.
It is also illegal to stop within 300 feet of where an emergency vehicle is responding to an alarm. Stopping too close to the emergency vehicle can block the view of other drivers and make it difficult for the emergency vehicle to maneuver. Additionally, it can impede the flow of traffic and make it difficult for other vehicles to pass, which can cause a backup and delay the emergency vehicle's response time.
In summary, these regulations are put in place to ensure the safety of emergency vehicle's crews and other people on the road, and to make sure that emergency vehicles can respond to an alarm quickly and safely.
To know more about safety hazard, visit: https://brainly.com/question/30275814
#SPJ4
polly ester and ray ahn are doing the elastic collision lab on a low-friction track. cart a has a mass of 0.75 kg and is moving rightward at 14.7 cm/s prior to the collision with cart b. cart b has a mass of 2.00 kg and is moving leftward with a speed of 64.2 cm/s.
The post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right
From the law of conservation of momentum, the sum of initial momentum equals the sum of final momentum
Momentum, p-mv where m is the mass and v is the velocity
m1v1 + m2v2 = (M1V2 + M3V₁)
Let right direction be positive while left negative hence
1 x 27.6 + (0.5*-42.9) = 1 x -10.1 + 0.5v
16.25 = 0.5v
v = 16.25/0.5 = 32.5 cm/s in the right
Hence, post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right
Learn more about Speed here:
https://brainly.com/question/3004254
#SPJ4
▼
Part D
The quantity represented by v is a function of time (i.e., is not constant).
True or false
Part E a particle moves with constant acceleration a. The expression VI +80 represents the particles velocity at what instant in time.
A. At a time T=zero
B. At the initial time
C. When a time tea has passed since the beginning of the particles motion, when its velocity was the vi
The amount indicated by is not fixed and changes over time. In situations where the linear acceleration is not zero, the velocity is always changing.
The first case is true
Since it depends on time, is not constant?
The amount indicated by is not fixed and changes over time. In situations where the linear acceleration is not zero, the velocity is always changing.
The dimension of the quantity albo will be ufa au av u t when calculating a particle's velocity as a function of time t using the formula v = a(1 - eb), where a and b are constants. (1 - e-b) Greutate, urb'a 221 Aich, a zat a2b3c faut Eleft.
The amount indicated by is not fixed and changes over time. When linear acceleration is absent .
To learn more about time refer to:
brainly.com/question/17146782
#SPJ1
The quantity represented by v is a function of time (i.e., is not constant).
True or false
A particle moves with constant acceleration a. The expression VI +80 represents the particles velocity at what instant in time.
A. At a time T=zero
B. At the initial time
A particle starts from the origin at time t = 0 and moves along the positive x - axis. The graph of velocity with respect to time is shown in figure. What is the position of the particle at time t = 5s?
using the definition of the scalar product, find the angle between the following vectors. (find the smallest nonnegative angle.
When calculating the scalar and vector products, the angle between the vectors is taken into account. The dot product and inner product are other names for the scalar product.
Describe a vector ?In physics, a vector is a quantity with both direction and magnitude. It is often represented by such an arrow whose length was proportional to the size of the number and whose orientation is identical to that of the quantity. In science, anything with also a path and a magnitude is referred to as a vector. They are typically represented by pointing lines, each length of which denotes the size of the vector.
Describe a scalar ?Scalar quantities can be described by their size or magnitude alone and do not require any other information. So, 10 cm, 50 seconds, and 7 litres.
To know more about Vector visit :
https://brainly.com/question/29740341
#SPJ4
In an experiment, students use a force sensor to apply a force of magnitude F to an object of mass m that is initially at rest. The force is exerted in the +x-direction for a time t =T. The impulse exerted on the device is J. Which of following procedure changes would result in an impulse 2J being exerted on an object? A. Exert a force of magnitude F/2 on an object of mass m for a time t =T. B. Exert a force of magnitude F/2 on an object of mass 2m for a time t = 2T. C. Exert a force of magnitude F on an object of mass 2m for a time t = 2T. D. Exert a force of magnitude 2F on an object of mass m for a time t = 2T. E. Exert a force of magnitude 2F on an object of mass m for a time t = .T/2.
The force must be raised to apply an impulse of 2J to an item, either by increasing the force's intensity or the object's mass. The right answer is Option C because it satisfies the requirement by applying a force of magnitude F to an object with mass 2m for some time t = 2T.
What does the physics term "impulse" mean?
To change the momentum of an object, you must exert a certain amount of force over a specific period. It is F times t because of this. For instance, you exert force for a brief period when you hit a ball with a cricket bat.
What is the definition of an impulse simple?
In physics, the term "impulse" is used to characterize or measure the impact of force operating gradually to alter an object's motion. It is often stated in Newton seconds or kilograms per second and is denoted by the symbol J.
To know more about impulse visit:
brainly.com/question/27134914
#SPJ4
Of the list of terms and phrases below, select the ones that describe either formation areas or atmospheric conditions ideal for supercell thunderstorm development.
Group of answer choices
the US Central Plains states in spring
the warm sector of a developing mid-latitude cyclone
strong upper-level convergence
strong surface convergence
strong updrafts
the US Pacific Northwest in summer
cool, dry air in the mid-levels above warm moist air near the surface
strong vertical wind shear
Your students should be informed that the warm sector of a mid-latitude cyclone is the region situated between the leading warm front and the trailing cold front. The space behind the cold front is known as the cold-sector.
In a mid-latitude cyclone, what is its warm sector?Your students should be informed that the warm sector of a mid-latitude cyclone is the region situated between the leading warm front and the trailing cold front. The space behind the cold front is known as the cold-sector.The US Central Plains states in the warm sector of a developing mid-latitude cyclone in the spring are the formation areas or atmospheric conditions optimal for supercell thunderstorm development.Your students should be informed that the warm sector of a mid-latitude cyclone is the region situated between the leading warm front and the trailing cold front.To learn more about atmospheric conditions refer to:
https://brainly.com/question/13730644
#SPJ4
Which of the following changes to the circuit will decrease the electric field between the electrodes by the greatest amount?
a) Increasing L by a factor of 2 b) Decreasing L by a factor of 2 c) Increasing R by a factor of 2 d) Decreasing R by a factor of 2
Electric field (E) is directly proportional to the voltage (V) and inversely proportional to the distance (L) between the electrodes.
What is electric field and calculation for above answer?E = V/LElectric field also inversely proportional to the resistance (R)E = V/RThe circuit is a parallel plate capacitor which the electric field is the driving force that pushes charges around the circuit and the voltage is the energy stored in the circuit.Increasing L by a factor of 2 means that the distance between the electrodes is doubled, and therefore the electric field will be halved.Decreasing L by a factor of 2 means that the distance between the electrodes is halved, and therefore the electric field will be doubled.Increasing R by a factor of 2 means that the resistance is doubled and therefore the electric field will be halved.Decreasing R by a factor of 2 means that the resistance is halved and therefore the electric field will be doubled.Therefore, the change that will decrease the electric field between the electrodes by the greatest amount is decreasing L by a factor of 2.To learn more about electric field refer:
brainly.com/question/19385703
#SPJ4
The electric field will decrease by a factor of two when the distance is increased by a factor of 2 : V = E×d, E = V/d.
Option A is correct
- Since altering R is not directly proportional to E in the same way that altering the distance L is, increasing L is the most efficient approach.
What is an electric field?Electric field, an electric property that is connected to every point in space when any kind of charge is present. The electric field strength, intensity, or simply the electric field is expressed by the value of E, which indicates the magnitude and direction of the electric field.
What is an example of an electric field?The area of space around an electrically charged particle or object in which the charge body experiences force is known as an electric field . Examples: Charges and their configurations, such as those of capacitors and battery cells, produce electric fields.
Question incomplete:Which of the following changes to the circuit will decrease the electric field between the electrodes by the greatest amount?
A.Increasing L by a factor of 2
B. Decreasing L by a factor of 2
C. Increasing R by a factor of 2
D. Decreasing R by a factor of 2
Learn more about electric field:
brainly.com/question/1592046
#SPJ4
difference between speed and velocity, and describe how speed and velocity impact your acceleration.
Speed is the rate at which an object moves, while velocity is the speed of an object in a given direction, and acceleration is affected by both speed and velocity, as an increase in either can cause an increase in acceleration.
How is speed and velocity measured? Speed is the rate at which an object is travelling at any given moment, usually measured in units such as miles per hour (mph) or kilometers per hour (kph). Velocity is the rate of change in the object’s position over a period of time, typically measured in units such as meters per second (m/s).Speed can be measured directly, using devices such as radar guns, and is also inferred from distance and time measurements. Distance can be measured using a variety of methods, such as a ruler, a GPS device, or a map. Time can be measured using a stopwatch, a clock, or by measuring the amount of time it takes an object to travel a certain distance.Velocity is calculated by dividing the distance an object has traveled by the amount of time it took to travel that distance. For example, if an object moves a distance of 5 meters in 2 seconds, its velocity is 2.5 m/s.Speed and velocity can also be measured indirectly, using a variety of instruments such as accelerometers, gyroscopes, and other motion sensors. These instruments measure the object’s acceleration, which is the rate of change of its velocity over time. By combining the measurements of acceleration, distance, and time, speed and velocity can be calculated.To learn more about speed and velocity refer to:
https://brainly.com/question/21729272
#SPJ4
until he was in his seventies, henri lamothe excited audiences by belly-flopping from a height of 9 m into 31 cm. of water. assuming that he stops just as he reaches the bottom of the water and estimating his mass to be 60 kg, find the magnitudes of the impulse on him from the water.
The magnitude οf the impulse is −1120 Ns.
How to calculate the magnitude of the impulse?In its simplest form, an impulse is a fοrce that has been gradually integrated. By dividing the force's magnitude by the length of time it is applied, we can calculate the impulse's size for a force with a constant magnitude.
From the infοrmation given, the fοllowing can be deduced:
Height = 10m
Mass = 64kg
The kinetic energy is calculated as 1/2mv² while pοtential energy is calculated as mgh. Frοm the law of conversation:
[tex]\mathrm{ \dfrac{1}{2} mv^2 = mgh}[/tex]
[tex]\mathrm{v = \sqrt{2gh} }[/tex]
[tex]= \sqrt{2} \times \sqrt{9.8 } \times\sqrt{9}[/tex]
= 13.28 m/s
The change in velocity will be;
= 80(0 - 14)
= 80 × (-14)
= −1120 Ns
In cοnclusion, the magnitude οf the impulse is −1120 Ns.
Learn mοre about impulse on:
brainly.com/question/229647
#SPJ4
Large diameter lines carrying low pressure fluids such as engine return oil and cooling air are typically joined by a rubber hose that is slipped over the tube ends and held in place with screw type hose clamps
The main justification is that pressure decreases with surface area. Rubber hoses are widely used to connect large diameter lines that carry low pressure fluids, like cooling air and engine return oil.
The total area of an object's three-dimensional exterior surfaces, or the sum of its faces, is known as surface area. The main justification is that pressure decreases with surface area. Rubber hoses are widely used to connect large diameter. Its measurement units are square. In other words, the sum of all the areas of all the shapes that cover a surface equals the surface area of the object. A circle's diameter is equal to twice its radius in length. Measuring the distance between the circle's centre and its end allows one to determine the radius.
Learn more about pressure here
https://brainly.com/question/13199169
#SPJ4
The complete questions is -
Large diameter lines carrying low pressure fluids such as engine return oil and cooling air are typically joined by a rubber hose that is slipped over the tube ends and held in place with screw type hose clamps, Why?
A large adult is teaching a small child to ice skate. The adult has five times the mass of the child. They stand facing each other on the ice and push against each other to coast backwards. Which of the following best describes the force of the adult on the child, the force of the child on the adult, and their initial velocities?
A. The forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.
B. The forces form an action-reaction pair, and the adult velocity is five times the velocity of the child and in the opposite direction.
C. The forces do not form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.
D. The forces form an action-reaction pair, and the adult and child coast away at velocities that are equal in magnitude but opposite in direction.
The answer to the question is Option A i.e. the forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.
According to Newton’s third law of motion (every force has an equal and opposite reaction force), when two bodies interact, both of them apply forces on one another that are equal in magnitude but opposite in direction. This third law of motion by Newton is also known as the law of action and reaction and the forces form a action-reaction force.
Thus, when the adult pushes the child with a force of any magnitude, the child pushes the adult with the same magnitude force but in opposite direction thus the forces are a form of action-reaction pair.
as, F = ma and the forces are equal in magnitude for both, the velocity of the adult and that of the child have an inverse relation as that of masses of both, thus the velocity of child is five times that of the adult.
Thus, the answer to the question is Option A.
ALSO, the conditions follow the law only because the man and the child are standing on a frictionless floor i.e. ice so there is no static friction in play holding the heavier mass back for force to be nullified.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ4
A semi circle has a radius of 2000km and a thickness of 3000 meters. How many cubic centimeters does it have
The volume of the semi circle in cubic centimeters is 3.75 * 10^22 cm^3
What is the cubic centimeters ?We know that the first step that we would have to take is to be able to get the area of the semi circle and when we do that we are going to have from the values that we have in the question;
A = πr^2
A = area
r = radius
Where r = 2000km or 2 * 10^8 cm
A = 3.142 * (2 * 10^8)^2
A = 1.25 * 10^17 cm^2
Then we would have;
Volume = area * thickness
Thickness = 3000 meters or 3 * 10^5 cm
Volume = 1.25 * 10^17 cm^2 * 3 * 10^5 cm
= 3.75 * 10^22 cm^3
Learn more about volume:https://brainly.com/question/1578538
#SPJ1
failure of 'o-ring' seals led to the tragic explosion of the of the challenger space shuttlehallenger space shuttle
O-ring seal failure caused the fatal magnitude the of the An O-ring, a spherical gasket used to seal the right rocket booster, was found to be the primary culprit in the mishap.
What big was the Challenger's failed O-ring?On the Challenger, the O-ring had a circumference of 12 feet. As the igniters ignite the fuel upon launch, there seems to be high pressure on the inside of the solid rocket boosters. The parts holding the O-ring flexed slightly as a result of the pressure.
Who of the following is best recognized for expressing grave worries about the O-ring months just before launch of the space shuttle Challenger?He was required to appear before an executive panel, and when he did, he informed the commission's chairman, William Rogers, that Morton Thiokol had been so worried about the Aaaaa that they had advised NASA not to launch the spacecraft in conditions that were cooler than 53 degrees.
To know more about magnitude visit :
https://brainly.com/question/28173919
#SPJ4
What happens when a cold piece of metal is placed in hot water?
heat will flow from the water to the metal
heat will flow from the metal to the water
temperature will flow from the water to the metal
temperature will flow from the metal to the water
Heat will flow from hotter region to the colder region. When a cold piece of metal is placed in hot water heat will flow from water to the metal.
What is heat transfer ?Heat energy will transfer between regions over a temperature gradient. Heat flows from hotter regions to colder regions to balance the total heat energy.
In solids, heat transfer takes place by conduction mechanism where one hotter molecules transfers the energy to nearest molecules in the closely packed chain. In liquids and gases, heat transfers through convection.
When a cold piece of metal is paced in hot water, the heat energy from the water will flow to the colder metal. Hence, the temperature of water will reduce.
Find more on heat transfer;
https://brainly.com/question/13433948
#SPJ1
As shown, a server at a restaurant is carrying a tray that has a glass of water resting on it. The glass and tray exert a force with magnitude F1 = 4.00 on the server's hand. If l1 = 1.45 ft, l2 = 1.15 ft, l3 = 0.500 ft, σ1 = 145o, and σ2 = 110o, what is the moment of force about the shoulder joint at point A? Assume that moments acting in the counterclockwise direction about point A are positive whereas moments acting in the clockwise direction are negative. ft
MA = ??? lbo ft
positive while seconds moving counterclockwise Direction are negative 1.18lb.ft
What is the most accurate way to define direction?Direction is characterized as the course that anything follows, the route that needs to be taken to go to a particular location, the direction where something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.
WHY IS DIRECTION ESSENTIAL?Directions explain how to perform an action or the proper sequence. You are provided instructions for a number of your activities and assessments. It's critical to comprehend the motivation behind the instructions. Before starting anything, it's also crucial to follow ALL of the instructions.
To know more about direction visit:
https://brainly.com/question/30173481
#SPJ4
thurat the boiling point, the density of the liquid is and that of the gas is . how many liters of liquid nitrogen are produced when of nitrogen gas is liquefied at ? round your answer to significant figures.
When the melting point, liquid density, and gas density are specified, 1.360 L of liquid nitrogen is created.
We presume that the specified volume of gas is fully liquefied because no other requirements are provided (no equilibrium gas phase).
Determine the mass of nitrogen as follows:
241.0L * 4.566 g/L = 1100.406g.
Determine the amount of liquid nitrogen based on the mass determined in step 2:
Volume = mass/liquid density = 1100.406g/L = 1.360 L.
A liquid's density is a measurement of how heavy it is for the amount measured. When two liquids of identical weight or volume are weighed, the heavier liquid is more dense. A liquid that is less dense than water will float on the surface of the water if it is gently added to the surface.
The correct question is:
At the boiling point, the density of liquid nitrogen is 809 g/L and that of the gas is 4.566 g/L. How many liters of liquid nitrogen are produced when 241.0 L of nitrogen gas is liquefied at 77.36 K?
Learn more about Density here:
https://brainly.com/question/6329108
#SPJ4
The speed of light is ×2.998108/ms. How long does it take light to travel 90.cm?
Set the math up. But don't do any of it. Just leave your answer as a math expression.
Also, be sure your answer includes all the correct unit symbols.
Time=0.9/2.998*10^8 is the equation for how long it takes light to travel 90 cm.
What is speed?Velocity is the rate and direction of an object's movement, whereas speed is the time rate at which an object is moving along a path. In other words, velocity is a vector, whereas speed is a scalar value. the speed at which an object's position changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.
Here,
distance=90 cm=0.9 m
speed=2.998*10^8 m/s
thus time taken will be:
=distance/speed
time=0.9/2.998*10^8=0.10006 seconds
thus the expression is:
time=0.9/2.998*10^8
The expression for how long does it take light to travel 90 cm is time=0.9/2.998*10^8.
To know more about speed,
https://brainly.com/question/9998060
#SPJ4
water as a resource unit review practice 1 of 91 of 9 itemspause question which of the following describes the relationship between population growth and the underground water supply?(1 point)
Increased population expansion directly increases the demand for resources like water. When the population's need for water exceeds the availability from sources on the surface, such as rivers and lakes underground water is tapped.
What connection is there between population and water?In example, population growth will reduce the amount of water per person accessible since increased per capita water usage brought on by development will raise water demand, placing stress on the local water supply.
What effects does population growth have on groundwater?Producing food Population growth results in increased water consumption as well as increased water requirements for food production. We will need to pump groundwater more quickly than it can be extracted in order to meet the demands for food production brought on by the rapid increase in population.
To know more about population growth visit:
https://brainly.com/question/18415071
#SPJ4
how long would it take a blue whale from one side of the pacific ocean to find the other at a speed of 5 mps for the 4000 miles it went
It would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.
What is the significance of the speed of an organism?The speed of the organism is determined by its body structure and how nature designed it, such as in some fast-swimming fish, which have different body designs than some slow-moving fish. Because of their speed, they can escape and flee predators.
Hence, it would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.
Find out more about the speed here.
https://brainly.com/question/22802060
#SPJ1
A mass attached to a vertical spring causes the spring to stretch and the mass to move
downwards. What can you say about the spring’s potential energy (EPE) and the
gravitational potential energy (GPE) of the mass?
A) both EPE and GPE decrease
B) EPE increases and GPE decreases
C) both EPE and GPE increase
D) EPE decreases and GPE increases
The spring's elastic potential energy decreases and the gravitational potential energy increases.
What do you mean by potential energy?
Potential energy is the energy an object possesses because of its position or state. It is the energy an object has due to its height, position, or chemical composition. The unit of measurement for potential energy is usually Joules (J).
There are different types of potential energy, such as gravitational potential energy (GPE), elastic potential energy (EPE), and chemical potential energy.
When a mass is attached to a vertical spring, it causes the spring to stretch. As the spring stretches, it stores potential energy in the form of elastic potential energy (EPE). As the spring stretches, the potential energy stored in it increases.
At the same time, as the mass is attached to the spring and moves downward, it loses gravitational potential energy (GPE) due to the work done by gravity on the mass. Since the mass is moving downward, the gravitational force is acting in the opposite direction of the displacement, resulting in a decrease in GPE. Therefore, as the mass moves downward, the EPE of the spring increases and the GPE of the mass decreases.
Therefore, the spring's elastic potential energy decreases and the gravitational potential energy increases.
To learn more about potential energy from the given link:
https://brainly.com/question/24933254
#SPJ1
A high fountain of water is located at the center of a circular pool as shown in the figure below. A student walks around the pool and measures its circumference to be 34.8 m. Next, the student stands at the edge of the pool and uses a protractor to gauge the angle of elevation of the top of the fountain to be = 60.0°. How high is the fountain?
m
The height of the fountain is 9.6 m.
What is the radius of the pool?
The radius of the pool is calculated by applying the formula for circumference of a circle.
P = 2πr
where;
r is the radiusr = ( P ) / ( 2π )
r = ( 34.8 ) / ( 2π )
r = 5.54 m
The height of the fountain is calculated as follows;
the angle of elevation, radius of the pool and the height of the fountain forms a right triangle.
let the height of the fountain = h
tan 60 = h / r
h = r x tan 60
h = ( 5.54 m ) x tan 60
h = 9.6 m
Learn more about height here: https://brainly.com/question/974651
#SPJ1
Determine the following quantities: (a) wavelength λ of a 300 GHz EM wave propagating in free space(b) frequency of an EM wave with λ = 0.1cm(c) dBm equivalent of 120 dB if 0dBm corresponds to 1mW = 10-3 W.
(a) The wavelength of a 300 GHz EM wave propagating in free space is 10 cm.
(b) The frequency of an EM wave with λ = 0.1cm is 3 x 10^7 MHz
(c) The dBm equivalent of 120 dB is 120 dBm if 0dBm corresponds to 1mW = 10^-3 W.
What is wavelength and determine frequency?(a) The wavelength of an EM wave is related to its frequency by the equation:λ = c/f, where λ is wavelength, c is the speed of light in a vacuum (approximately 3 x 10^8 m/s) and f is the frequency of the wave.Given the frequency of the wave is 300GHz, we can plug in the values to find the wavelength:λ = c/f = (3 x 10^8 m/s) / (300 x 10^9 Hz) = (3/300) x 10^-1 m = 0.01 m = 10 cm(b) The frequency of an EM wave is related to its wavelength by the equation:f = c/λ, where f is frequency, c is the speed of light in a vacuum (approximately 3 x 10^8 m/s) and λ is the wavelength of the wave.Given the wavelength of the wave is 0.1cm, we can plug in the values to find the frequency:f = c/λ = (3 x 10^8 m/s) / (0.1 x 10^-2 m) = 3 x 10^8 m/s / (0.1 x 10^-2 m) = 3 x 10^8 m/s / 0.1 x 10^-2 m = 3 x 10^8 m/s / 10^-2 m = 3 x 10^10 Hz = 3 x 10^7 MHz(c) dBm is a unit used to express power levels relative to one milliwatt. The equation to convert between dBm and watts (W) is:P(dBm) = 10 log10(P(W)/1mW)Given 0dBm corresponds to 1mW = 10^-3 W, we can use this equation to find the dBm equivalent of 120 dB :P(dBm) = 10 log10(120/1) = 120 dBmTo learn more about wavelength refer:
brainly.com/question/10750459
#SPJ4
A 300 GHz electromagnetic wave traveling through free space has a wavelength of 10 cm.
(b) An EM wave with = 0.1cm has a frequency of 3 x 10⁷ MHz.
(c) The dBm equivalent of 120 dB is 120 dBm if 0 dBm is equivalent to 1mW = 10 ⁻³W.
What is wavelength and how does frequency get determined?(a) The equation relates an EM wave's frequency to its wavelength:
= c/f, where f is the frequency of the wave, c is the vacuum speed of light (approximately 3 x 10⁸ m/s), and is the wavelength.
We can plug in the values to determine the wavelength since the wave has a frequency of 300 GHz:
= c/f = (3 x 10⁸ m/s) / (300 x 10⁹ Hz) = (3/300) x 10⁻¹ m = 0.01 m = 10 cm
(b) The following equation describes the relationship between an EM wave's frequency and wavelength: f = c/, where f is the frequency, c is the vacuum light speed (about 3 x 10⁸ m/s), and is the wave's wavelength.
We can plug in the values to determine the frequency because the wave's wavelength is 0.1 cm:
f = c/ = (3 x 10⁸ m/s) / (0.1 x 10⁻² m)
= (3 x 10⁸ m/s) / (0.1 x 10⁻² m)
= (3 x 10⁸ m/s) / (0.1 x 10⁻² m)
= (3 x 10¹⁰ Hz)
= (3 x 10⁷ MHz)
(c) The power level is expressed in terms of one milliwatt .The formula for converting dBm to watts (W) is as follows:
Given that 0 dBm corresponds to 1 mW = 10⁻³ W, we can use this equation to determine the dBm equivalent of 120 dB: P(dBm) = 10 log10(P(W)/1mW
P(dBm) equals 120 dBm for 10 log10(120/1).
Learn more about wavelength:
brainly.com/question/10750459
#SPJ4