All three experience the same uboyant force.
What is buoyant force?
Upthrust, often known as buoyancy, is an upward force applied by a fluid against the weight of an object that is partially or completely submerged. The weight of the fluid on top causes pressure in a fluid column to rise with depth.
All three objects experience the same buoyant force because their volumes are equal the buoyant force on an object in a liquid depends on the volume of the submerged object, the density of the liquid, and the acceleration caused by gravity but not on the density of the object.
Hence, all will experience the same buoyant force.
To learn more about the buoyant force the link is given below:
https://brainly.com/question/13748426?
#SPJ4
a new planet has 1/2 density of earth but 3 times the radius of earth. what is the approximate g-field strength of the new planet
6g is gravitational -field strength of the new planet
The acceleration due to gravity on earth's surface is
g=GM/R^2
g=GρV/R^2
, G= the gravitational constant,
M =mass of earth,
R =radius of earth,
ρ=the density and
V = the volume of earth.
V=4/3×π×R^3
Putting this value
g∝ρ/R
g′/g=R/2×3R
g′=6g
The gravitational field has direction, much as other electromagnetic fields like the electric and magnetic fields. It is a vector field as a result. The gravitational field strength, which has the unit Newtons per kilogram, is used to measure the gravitational field. This field force has a limitless range and is constantly attracting.
The electromagnetic field, or the electric and magnetic fields for charged particles and magnets, is comparable to the gravitational field. Since electromagnetic field forces are stronger than gravitational field forces, they take precedence over them.
To know more about gravitational -field strength visit : https://brainly.com/question/18511078
#SPJ4
a 0.90-kg block is suspended from a spring with a spring constant of 320.0 n/m. a 0.030-kg bullet is fired into the block from directly below with a speed of 280.0 m/s and is embedded in the block. find the amplitude of the subsequent motion. you may ignore gravitational potential energy as if the system was horizonta
The amplitude of subsequent motion is 0.028 m.
Mass of a given block= 0.90 kg
Spring constant (k) of a spring = 320N/m
Weight of the given block = F = mg = 0.90 × 9.81 = 8.83 N
F/k = x which is the compression of spring (amplitude) and is equal to 8.83/320 = 0.028 m
When an object is present in a gravitational field, it has or can acquire gravitational potential energy, which is the energy that results from a change in position. Gravitational potential energy is energy that has a connection to gravitational force or gravity. An example of a system possessing gravitational potential energy is water stored in a dam.
You can learn more about gravitational potential energy by visiting the following link;
https://brainly.com/question/19768887
#SPJ4
Select the correct anwer. Paul ha a very mall budget, but he trongly believe that hi new product will be a ucce. Which ale channel hould he try given hi ituation?
A. Franchiing
B. E-commerce
C. Flea market
D. Telemarketing
E. Multilevel marketing
Paul has a very small budget, but he want to do some business job. The channel he could try in his situation is C. Flea Market.
What is Flea Market?Flea Market is a market where multiple vendors gather to sell their products. Many flea markets offer both new or secondhand goods. Though open-air markets were once the norm, today's flea markets may take place indoors, outdoors, or both. Many people with low budget and want a simple way of selling their goods use this kind of market. They don't need to rent such a permanent place. They also do not need to share their profit from sales to service providers like if they did it in E-commerce.
Learn more about flea market https://brainly.com/question/15400739
#SPJ4
An object i dropped from ret and fall freely 20. Meter to Earth. When i the peed of the object 9. 8 meter per econd?
Answer:
The speed of the object is 9.8 meters per second after one second of free fall. In that one second, the object travels 4.9m.
Explanation:
On Earth, acceleration due to gravity is 9.8[tex]\frac{m}{s^2}[/tex]. Use kinematic equation #1 to find the time it takes this object to achieve the given speed (v).
[tex]v=v_0+at\\a=9.8\frac{m}{s^2}\\v_0=0\frac{m}{2}\\v=9.8\frac{m}{s}\\9.8\frac{m}{s}=0.0\frac{m}{s}+(9.8\frac{m}{s^2})t\\t=\frac{9.8\frac{m}{s}}{9.8{m}{s^2}}\\t=1 s[/tex]
This is intuitive. The velocity of an object in free fall gains 9.8[tex]\frac{m}{s}[/tex] per second unless acted upon by an outside force.
To find how far the object has fallen, insert the given and derived values into kinematic equation #2.
[tex]\Delta y=(\frac{v+v_0}{2})t\\\Delta y=(\frac{9.8\frac{m}{s}+0.0\frac{m}{s}}{2})(1 s)\\\Delta y=4.9m[/tex]
Hope that helps.
a(n) is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.
A disconnecting means is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.
This is the definition given to disconnecting means by NEC. NEC stands for National Electrical Code. It is a standard to safe installation of electrical wiring and electrical equipment. It is created to provide safety for people from electrical hazards.
A switch is an example of disconnecting means. A disconnecting means isolates the service panel from the source of utility power. The main circuit breaker on a service panel is another form of disconnecting means.
Therefore, a disconnecting means is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.
To know more about disconnecting means
https://brainly.com/question/21779056
#SPJ4
a service main at the end of a street decreases in diameter from 12 to 4 inches. if the flow rate is 4 ft/s and the pressure at point 1 is 50 psi
The amount of fluid that moves past a point in area A per unit of time is known as the flow rate.
How do you find average velocity from flow rate?The amount of fluid that moves past a point in area A per unit of time is known as the flow rate. Here, a uniform pipe carrying the shaded fluid cylinder passes point P in time t. The cylinder's capacity is Ad, its average velocity is v=d/t, and its flow rate is Q=Ad/t=Av.The average fluid velocity for laminar flow through a pipe is equal to half of the fluid's greatest velocity at the pipe's center. The Hagen-Poiseuille equation is shown above. Since there is no acceleration in a steady and uniform flow, there is no force acting in the direction of the flow.To learn more about fluid velocity refer,
https://brainly.com/question/13344039
#SPJ4
Zoe knows that the food she eats has a lot of empty calories, so she takes supplements. Her parents keep trying to get her to eat more vegetables
and other nutrient-rich foods. But Zoe tells them as long as she is getting nutrients, it does not matter how she gets them. What is the BEST
response to Zoe?
OA. It is better to get the nutrients from food than supplements.
OB. If she feels fine, then she is probably getting enough nutrition.
OC. If she is taking supplements, her diet will not impact her health.
OD. She should take the supplements before she eats her vegetables.
Answer:
OA.
Explanation:
its better for zoe to get it from vegetables because supplements aren't intended to replace food. They can't replicate all of the nutrients and benefits of whole foods, such as fruits and vegetables.
an ideal solenoid has an inductance of 6.8 mh. to generate an emf of 2.6 v, what should the current should change at a rate of? answer in amps/second.
An ideal solenoid has an inductance of 6.8 mh. to generate an EMF of 2.6 v, The current should change at a rate of 2.62 * [tex]10^{-3}[/tex] A / second
induced EMF in a solenoid = -L * (di/dt)
∈ = -L * (di/dt)
di/dt = - L / ∈
= - 6.8 * [tex]10^{-3}[/tex] / 2.6
= - 2.62 * [tex]10^{-3}[/tex] A / second
The current should change at a rate of 2.62 * [tex]10^{-3}[/tex] A / second
To learn more about inductance here :
https://brainly.com/question/15576393
#SPJ4
how much more energy is required to walk in sand than to walk on a hard surface? group of answer choices about half as much almost twice as much five times as much it depends on too many other factors to estimate
More energy is required to walk in the sand than to walk on a hard surface is Option C. almost twice.
Energy is the quantitative belongings that are transferred to a body or to a bodily machine, recognizable in the overall performance of work and inside the shape of heat and light. power is a conserved quantity—the law of conservation of energy states that electricity can be transformed in form, however not created or destroyed.
Strength exists in many extraordinary bureaucracies. Examples of these are mild power, warmness electricity, mechanical strength, gravitational power, electric power, sound strength, chemical energy, nuclear or atomic electricity, and so on. every form can be transformed or changed into the opposite form.
Energy is so important in our everyday lives because it's far a simple human want. We use power not the handiest warmth our human-made structures however we use it to cool them as well. strength is essential for buying up away from the bed, strolling down the road, or maybe lifting your finger.
Learn more about energy here:-
#SPJ4
a closed column of water has a diameter of 2 m and a depth of 9.6 m. how much pressure is at the bottom of the column? the acceleration of gravity is 9.8 n/kg .
The pressure at the bottom of the column is 921.948 Nm⁻²
Pressure is the force applied perpendicular to the floor of an object in keeping with the unit region over which that pressure is shipped. Gauge strain is the strain relative to the ambient strain. diverse devices are used for a specific pressure.
A simple example of stress may be visible via conserving a knife to a bit of fruit. if you hold the flat part of the knife against the fruit, it may not cut the floor. The force is spread out of a large place (low strain).
It is for the ratio of the force implemented to the surface area over which the pressure is applied. we will outline stress as: The pressure applied perpendicular to the surface of an item according to the unit region over which that force is shipped.
Calculation:-
pressure = ρgh
= 9.8 × 9.8 × 9.6
= 921.948 Nm⁻²
Learn more about pressure here:-https://brainly.com/question/28012687
#SPJ4
About how much greater is the gravitational force exerted by the moon on the near side of the earth than on the far side?.
The moon exert 7% more gravitational fore on the near side of the earth than the far side of the earth.
Any two objects in the universe are drawn together by gravitational attraction, regardless of whether their masses are equal or not. Additionally, according to Newton's Universal Law of Gravitation, everything in the universe, including you, is pulled toward everything else. The unit of gravitational force is a Newton, represented by the letter N.
A fundamental interaction in physics that creates mutual attraction between all entities with mass or energy is called gravity (from the Latin gravitas, "weight"). The electromagnetic force, the strong interaction, and the weak interaction are all significantly stronger than gravity, which is by far the weakest of the four fundamental interactions.
Learn more about gravitational force:
brainly.com/question/11575518
#SPJ4
Solve for xxx. Enter the solutions from least to greatest.
Round to two decimal places.
(x + 8)^2 - 7 = 0(x+8)
2
−7=0
The given equation is (x+8)²-7=0 and is said to be round to two decimal places. The solution is said to be entered from least to the greatest that is -10.65 and -5.35.
The equation with its highest degree as 2 is called a quadratic equation. We get two solutions for it when we solve it.The quadratic equation is given here as (x+8)²-7=0.
Let us solve the above equation,
(x+8)²-7=0
(x+8)²=7
x+8= ±√7
x= -8 ±√7
The two values of x are √7-8, -8 -√7.
√7-8= -5.35
-8 -√7= -10.65
Thus, the solutions from least to the greatest are -10.65 and -5.35.
To know more about the decimal places:
https://brainly.com/question/28011380
#SPJ1
How does the work required to accelerate a particle from 10 m/s to 20 m/s compare to that required to accelerate it from 20 m/s to 30 m/s ?.
Answer:
Explanation:
The work is equal to the change in kinetic energy:
A = Ek - Ek₀
Given:
V₁ = 10 m/s
V₂ = 20 m/s
V₃ = 20 m/s
V₄ = 30 m/s
_____________
A₃₄ / A₁₂ - ?
A₁₂ = m·V₂²/2 - m·V₁²/2 = (m/2)·(V₂² - V₁²)
A₃₄ = m·V₄²/2 - m·V₃²/2 = (m/2)·(V₄² - V₃²)
A₃₄ / A₁₂ = (V₄² - V₃²) / (V₂² - V₁²)
A₃₄ / A₁₂ = (30² - 20²) / (20² - 10²)
A₃₄ / A₁₂ = (900 - 400) / (400 - 100) = 500 / 300 ≈ 1.67
The work of A₃₄ is 1.67 times more than the work of A₁₂
four 7.5-kg spheres are located are located at the corners of a square of side 0.80 m. calculate the magnitude and direction of the gravitational force exerted on one sphere by the other three.
The gravitational force on one sphere due to the three of square is 718.87 ×10⁻¹¹N
Gravitational force is the attraction force exerted between all the masses existing in the universe.
Every body having mass attracts the other massive body by the gravitational force.The SI unit of this force is Newton (N).Mass of the spheres = m = 7.5 kg
Length of the square side = d = 0.8 m
Due to the square's three corner there will be upward , right and diagonal three forces acting on the system,
Fupward = G(m²/d²)
Fright = G(m²/d²)
Fdiagonal = G (m²/(√2d)²)cos45°+ G (m²/(√2d)²)sin45°
here G is the Gravitational force constant which has the value of 6.67 ×10⁻¹¹ Nm²/kg².
To calculate the force on the left sphere in the lower left corner. From the symmetry of the problem the net forces in the x and y direction will be the same and θ = 45°
Therefore, the force will be,
Fx = Fright + Fdiagonal
Fx = G(m²/d²) +G (m²/(√2d)²)(1/√2)
Fx = G(m²/d²)[(1+(1/2√2)]
Also Fy = Fx =G(m²/d²)[(1+(1/2√2)]
By the Pythagorean combination of the two component forces , due to symmetry the the net force will be along the diagonal of the square,
F = √Fx +Fy= Fx√2
F = G(m²/d²)[(1+(1/2√2)]√2}
F = (6.67 ×10⁻¹¹ Nm²/kg²)(7.5kg)²/(0.8m)²[(1+(1/2√2)]√2}
F = 718.87 ×10⁻¹¹N
The magnitude of the gravitational force exerted on one sphere by the other three is 718.87 ×10⁻¹¹N and the direction of the force will be towards the sphere.
To know more about gravitational force,
https://brainly.com/question/24110195
#SPJ4
25.22 kg object is accelerating at rate 11.48 m/s^2 what is net force acting on the object
289.53 newton is the force acting on the 25.22 kg object accelerating at the rate of 11.48m/s²
What is the net-force acting on the object?From the Newton's second law, force is expressed as;
F = m × a
Where m is mass and a is acceleration.
Given the data in the question;
Mass of the object m = 25.22kgAcceleration of the object a = 11.48m/s²Applied force F = ?To determine the force acting on the object, plug the given values into the Newton's formula above.
F = m × a
F = 25.22 kg × 11.48 m/s²
F = 289.53 kgm/s²
F = 289.53 N
Therefore, the force acting on the object is 289.53 N.
Learn more about force here: brainly.com/question/27196358
#SPJ1
saturated liquid water enters an ideal pump at a pressure of 0.1 [bar]. pressure at the outlet is 5 [bar]. what is the outlet temperature of the pump?
46 °C is the outlet temperature of the pump.
Temperature is the measure of hotness or coldness expressed in terms of any of numerous scales, which includes Fahrenheit and Celsius.
Temperature shows the path wherein warmness power will spontaneously go with the flow i.e., from a hotter frame to a chillier body.
calculation:-
PT = PT2
T2 = PT/P2
= 0.1 × 298/5
= 47°C
The pressure of a given amount of gas is without delay proportional to the temperature at a given quantity. When the temperature of a gadget is going up, the pressure additionally goes up, and vice versa. the connection among strain and temperature of a fuel is said through the Gay-Lussac's law.
The pressure law states that for a constant extent of fuel in a sealed box the temperature of the gas is directly proportional to its strain. this could be without problems understood by visualizing the particles of gasoline inside the field moving with a more energy when the temperature is increased.
Learn more about temperature here:- https://brainly.com/question/2339046
#SPJ4
After careful analysis, an electromagnetic wave is found to have a frequency of 7. 8 x 106 hz. What is the speed of the wave?.
Answer:
below
Explanation:
Electromagnetic waves travel at the speed of light 3 x 10^8 m/s
In the winter, an
animal's fur provides
Warmth through which
method?
Answer:
insulation
Explanation:
they use fur to trap a layer of heat next to its skin and reduce heat transfer
think of it like a house, a closed environment/system and it traps warmth inside and it cant get out. or like a microwave, when you open it you can feel the heat releasing.
a spring is stretched 20 cm by a 30.0 n force. determine the work done in stretching the spring from 0 to 40 cm?
The work done when a spring is stretched from 0 to 40cm is 4J.
What is work done?
Work done is the magnitude of force multiplied by displacement of an object. It is also the amount of energy transferred to an object when work is done on that.
The work done on the spring to stretch to 40cm is,
F = kx
where F is force, k is force constant.
k = F / x = 10 N / 20 * 10^-2 m = 50 N/m
W = 0.5 * k * (x)^2
where W = work done, k = force constant.
W = 0.5 x 50 x (40 x 10^-2)^2 = 4 J.
Therefore, the work done on the spring when it is stretched to 40cm is 4J.
To learn more about work done click on the given link https://brainly.com/question/25573309
#SPJ4
calculate the frequency of radiation that has a wavelength of 5.23 x 10^-4 m. answer in scientific notation with units of hz.
The frequency of radiation that has a wavelength of 5.23 x 10^-4 m is
57.36 x 10¹⁰ Hz.
Light's wavelength and frequency are inversely proportional to one another.
Light waves with the highest frequencies have the shortest wavelengths, and those with the lowest frequencies have the longest wavelengths.
Formula:
Speed of light = wavelength × frequency
c = λ × f
f = c / λ
The speed of light = 3×10⁸ m/s
a wavelength of radiation = 5.23 x 10⁻⁴m
To calculate the frequency of the radiation :
f = c / λ
using values of c and λ we get,
f = (3×10⁸ m/s) / ( 5.23 x 10⁻⁴m)
f = 0.5736 x 10¹² Hz
f = 57.36 x 10¹⁰ Hz
The frequency of radiation that has a wavelength of 5.23 x 10^-4 m is 57.36 x 10¹⁰ Hz.
To know more about frequency
https://brainly.com/question/18071764
#SPJ1
if the mass of the child and sled is 38 kg , what is the magnitude of the average force you need to apply to stop the sled? use the concepts of impulse and momentum.
The magnitude of the average force is 101.33N.
Here we have to find the magnitude of the average force.
The given data:
Initial velocity(u) = 1.6m/s
Mass of the child and sled = 38 kg
Time taken = 0.60s
Formula to find the impulse:
Impulse = change in momentum
We have final velocity (v) = 0
Ft = m(v - u)
F = m(v-u)/t
F = -38 × 1.6/ 0.6
= -101.33N
Therefore we get an average force is 101.33N.
To know more about the force refer to the link given below:
https://brainly.com/question/12785175
#SPJ4
To generate lightning, a cloud must have a ____ charge in the top half of the cloud and a _____ charge in the bottom half of the cloud.
To generate lightning, a cloud must have a Positive charge in the top half of the cloud and a Negative charge in the bottom half of the cloud.
A cloud is a collection of ice or water vapour floating in the atmosphere. When water in the sky condenses, clouds are created. We can observe the water vapour thanks to the condensation. Clouds come in a wide variety of forms. The weather and environment of Earth depend heavily on clouds.
A wide range of use cases, including data backup, disaster recovery, email, virtual desktops, software development and testing, big data analytics, and customer-facing web apps, are being used by businesses of every size, type, and sector.
Because the information being accessed is located remotely in the cloud or another virtual environment, cloud computing has earned its moniker. Users who use cloud services from companies can store and then access data and programmes on distant servers.
Learn more about cloud:
https://brainly.com/question/25130975
#SPJ4
a spring-powered dart gun is un-stretched and has a spring constant 12.0 n/m. the spring is compressed by 8.00 cm and a 5.00 gram projectile is placed in the gun. the velocity of the projectile when it is shot from the gun is: a. 1.52 m/s. b. 2.54 m/s. c. 3.92 m/s. d. 4.24 m/s. e. 5.02 m/s.
The velocity of the projectile when it is shot from the gun is 3.91 m/s.
The velocity of the projectileWe have,
Spring constant = 12.0 n/m
The spring is compressed by 8.00 cm = 0.08 m
Mass = 5.00 gram = 0.005 kg
The potential energy that occurs in the spring is elastic potential energy.
PE = ½ kx²
= ½ (12) (0,08)²
= 0.0384 J
The kinetic energy of the two objects after the collision is equal to the potential energy of the springs.
So,
PE = KE
0.0384 = ½ (0.005) (v)²
0.0384 = 0.0025 v²
v² = 15.36
v = 3.91 m/s
Learn more about velocity here: https://brainly.com/question/24445340#SPJ4
How do you find speed from wavelength and Hz?.
Speed = Wavelength x Wave Frequency.
Wavelength is measured in meters and frequency is measured in hertz, or waves per second. Therefore, wave velocity is expressed in meters/second, which is the SI unit of velocity. Wavelength is the distance between identical points in adjacent cycles of a waveform signal propagating in space or along a wire.
For wireless systems, this length is usually expressed in meters centimeters, or millimeters. Wavelength can be defined as the distance between two consecutive peaks or valleys. Measured in the direction of the wave. The wavelength of light is an important property that determines the properties of light. Red light has a different wavelength than blue light and green light has a different wavelength from both.
Learn more about Wavelength here:-https://brainly.com/question/10728818
#SPJ4
I NEED THIS ASAP PLEASE ILL GIVE POINTS (science)
The answer is c.Evaporation
Answer:
C) Evaporation
Explanation:
Think of it like eVAPORation
a 4.50 g bullet pierces a sand bag 22.0 cm thick. if the initial bullet velocity was 224. m/s and it emerged from the sandbag with 24 m/s, what is the average magnitude of the friction force the bullet experienced while it traveled through the bag?
The average magnitude of the friction force the bullet experienced while it traveled through the bag is 12.375 N.
Energy conservation is the decisions and practices to use less energy. Turning off lights when leaving a room, unplugging appliances when not in use, and walking instead of driving are examples of energy conservation. To solve this problem, we can use the law of conservation of energy. We know that the bullet he enters at 39 m/s and exits at 27 m/s, losing some energy. This can be modeled by the energy equation of motion. "U" is the energy lost when the bullet passes through the bag. Then, solving for U, we find that the bag is 48 cm thick and F * d = W by rearranging:
F = 12.375 N
Learn more about energy here-
https://brainly.com/question/1932868
#SPJ4
The world's fastest insect is the horse fly. A horse fly can top out at
90 mph! Find its velocity if it has a mass of 1.2 x 10-5 kg. The kinetic
energy of the house fly is 0.019 Joules.
The velocity of the house fly of mass 1.2×10⁻⁵ kg, with a kinetic energy of 0.019 J is 56.27 m/s
What is velocity?Velocity can be defined as the ratio of displacement to time.
To calculate the velocity of the house fly, we use the formula of kinetic energy below.
Formula:
K.E = mv²/2........... Equation 1Where:
K.E = Kinetic energy of the house flym = Mass of the house flyv = Velocity of the house flyFrom the question,
Given:
m = 1.2×10⁻⁵ kgK.E = 0.019 JSubstitute these values into equation 1 and solve for v
0.019 = (1.2×10⁻⁵× v²)/2v² = (2×0.019)/ 1.2×10⁻⁵v² = 3166.67v = √(3166.67)v = 56.27 m/sHence, the velocity of the house fly is 56.27 m/s
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
a prize wheel is spinning in a vertical circle at 2.0 rad/s when an acceleration is applied to the wheel to increase the velocity to 6.0 rad/s. how long did this acceleration last if the displacement during this time was 5.0 rad.
The acceleration of wheel will last for 1.25 sec.
What is angular acceleration?Angular acceleration refers to as change of angular velocity per unit of time. It is usually expressed in radians/sec². The direction of the acceleration vector is perpendicular to the plane in which the rotation occurs. As the angular velocity(ω) increases clockwise, the angular acceleration rate moves away from the observer. If the angular velocity increase is counterclockwise, the angular acceleration vector points in the direction of the viewer. In SI units, angular acceleration is measured in radians per second (rad/s²) and is commonly expressed as alpha (α).
For the given case,
Using equation of motion:
ω₂² = ω₁² + 2αθ
6² = 2² + 2 × α × 5
36 = 4 + 10α
10α = 32
α = 3.2 m/s²
Acceleration:
α = (ω₂ - ω₁)/t
t = (ω₂ - ω₁)/α
t = (6 - 2)/3.2
t = 1.25 sec
To know more about angular acceleration visit:
https://brainly.com/question/1980605
#SPJ4
Polyurea is a synthetic material that is often used as a waterproof coating. Polyurea is useful because it is not reactive chemically. This means it does not break down easily.
Considering this information, what is likely a negative impact of polyurea?
A.
It has toxic effects on nearby wildlife.
B.
It does not break down after it is disposed of.
C.
It damages materials that it comes in contact with.
D.
It needs to be reapplied to surfaces frequently.
The negative impact of polyurea is It needs to be reapplied to surfaces frequently. Option D.
Studies have shown that polyurea coatings can increase the deflection of steel components, especially when applied to the exterior facing the blast. Polyurea is a commonly used polymer in moisture-resistant coating systems. Polyurea does not emit CO2 or other harmful gases during manufacturing or use.
Basic components can be manufactured in a climate-neutral manner using renewable energy allowing timely action to be taken regarding the ecological footprint as well. Cured polyurea has a high glass transition temperature and heat distortion temperature, but will burn when exposed to an open flame. It will self-extinguish when the flame is removed. Polyurea coatings provide a fast-curing durable flexible protective barrier that prevents water damage and harmful chemicals from destroying virtually any structure.
Learn more about renewable energy here:-https://brainly.com/question/79953
#SPJ1
a 1.7 m tall weightlifter holds a 780 n barbell above their head. how much work is being done on the bar
A 1.7 m tall weightlifter holds a 780 n barbell above their head. 1326 J work is being done on the bar .
work done = force * displacement
force = 780 N
displacement = 1.7 m
work = 780 * 1.7 = 1326 J
1326 J work is being done on the bar
To learn more about work done here :
https://brainly.com/question/13662169
#SPJ4
