A grain dealer sold to one customer 4 bushels of​ wheat, 6 of​ corn, and 8 of rye for ​$30. 20​; to​ another, 6 of​ wheat, 8 of​ corn, and 4 of rye for ​$29. 20​; and to a​ third, 8 of​ wheat, 4 of​ corn, and 6 of rye for ​$28. 80. What was the price per bushel for​ corn?

The side lengths for this problem are given as follows:

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

For segment d, we have that it is opposite to the angle of 60º, while 7 is the adjacent segment, hence:

tan(60º) = d/7

[tex]\sqrt{3} = \frac{d}{7}[/tex]

[tex]d = 7\sqrt{3}[/tex]

For segment b, it is opposite/adjacent (does not matter as sin(45º) = cos(45º)) to an angle of 45º, while the hypotenuse is of 5 units, hence:

sin(45º) = b/5

[tex]b = 5 \times \frac{\sqrt{2}}{2}[/tex]

[tex]b = \frac{5\sqrt{2}}{2}[/tex]

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

The number of respondents needed in a poll to adequately represent a larger population depends on several factors, such as the size of the population, the level of confidence desired, and the margin of error tolerated.

The general rule of thumb is that a sample size of at least 400 respondents is needed to provide a representative sample for a population of 100,000 or less. However, for larger populations, a sample size of at least 1,000 respondents may be required.

It is also important to note that a larger sample size does not always guarantee more accurate results. Other factors such as the sampling method, the wording of the questions, and the response rate can also impact the accuracy of poll results. Therefore, it is essential to carefully design and conduct polls to ensure their results are adequately representative of the larger population.

Learn more about Population here: brainly.com/question/29885712

#SPJ11

The inevitable difference between the mean of a sample and the mean of a population based on chance alone is known as sampling error.

Sampling error is a result of the random nature of sampling from a population, meaning that any given sample is unlikely to perfectly represent the entire population. This is where probability comes into play, as the likelihood of obtaining a certain sample is dependent on the probability of each member of the population being selected.

Therefore, in order to minimize sampling error, researchers often use random sampling techniques to ensure that each member of the population has an equal probability of being selected for the sample.

The inevitable difference between the mean of a sample and the mean of a population based on chance alone is a) sampling error. This occurs because a random sample may not perfectly represent the entire population, leading to slight variations in the mean.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

Step-by-step explanation:

Let's call the shorter base of the trapezoid "b1", the longer base "b2", and the height "h". We can use the formula for the surface area of a right prism to set up an equation:

Surface area of prism = 2(base area) + (lateral area) = 1280

The base area is the area of the trapezoid, which is given by:

(base area) = (1/2)(b1 + b2)h

The lateral area is the area of the four rectangular faces of the prism, which are all congruent. Each face has an area equal to the product of the height and the length of one of the legs of the trapezoid, so the lateral area is:

(lateral area) = 4hl

where l is the length of one of the legs of the trapezoid.

Substituting these expressions into the formula for the surface area of the prism, we get:

2[(1/2)(b1 + b2)h] + 4hl = 1280

Simplifying and rearranging, we get:

h(b1 + b2) + 2hl = 1280

We also know that the sum of the lengths of the legs of the trapezoid is 52 feet, which means:

l1 + l2 = 52

But we can express l1 and l2 in terms of b1 and b2 using the formula for the area of a trapezoid:

(base area) = (1/2)(b1 + b2)h = (1/2)(l1 + l2)h

Simplifying, we get:

b1 + b2 = (l1 + l2)h

Substituting this into the previous equation, we get:

h[(l1 + l2)h] + 2hl = 1280

Simplifying, we get:

h^2(l1 + l2) + 2hl = 1280

Substituting l1 + l2 = 52, we get:

h^2(52) + 2hl = 1280

This is a quadratic equation in h. We can solve it using the quadratic formula:

h = [-2l ± sqrt(4l^2 + 4h^2(52)(1280 - 2hl))] / 2(52)

Simplifying and factoring out a 2, we get:

h = [-l ± sqrt(l^2 + h^2(1280 - 2hl))] / 52

We have two possible solutions for h, but one of them is negative, which doesn't make sense in the context of the problem. So we can discard the negative solution and focus on the positive one:

h = [-l + sqrt(l^2 + h^2(1280 - 2hl))] / 52

We don't know the exact value of h yet, but we can use this equation to set up a system of equations that we can solve for h. Specifically, we can use the fact that the legs of the trapezoid add up to 52 feet to solve for l in terms of b1 and b2:

l = 52 - (b1 + b2)

Substituting this into the equation for h, we get:

h = [-l + sqrt(l^2 + h^2(1280 - 2hl))] / 52

h = [-52 + (b1 + b2) + sqrt((52 - (b1 + b2))^2 + h^2(1280 - 2h(b1 + b

The segment bisector of QR is Ml.

The length of QR is equal to 32 units.

In Mathematics, the midpoint of a line segment with two end points can be determined or calculated by adding each end point on a line segment together and then divide by two (2).

Since Ml is the midpoint and segment bisector of line segment QR, we have the following:

Line segment QM = Line segment MR

2x + 6 = 5x - 9

5x - 2x = 9 + 6

3x = 15

x = 15/3

x = 5.

Now, we can determine line segment QR as follows:

QM = 2x + 6 = 2(5) + 6 = 16 units.

MR = 5x - 9 = 5(5) - 9 = 16 units.

QR = QM + MR

QR = 16 + 16

QR = 32 units.

Read more on segment bisector here: https://brainly.com/question/29957844

#SPJ4

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

The length from least to greatest is √3, √5, π, 2√3.

We have the lengths as π, √3, 2√3, √5.

Now, writing the decimals for each

π= 3.14

√3 = 1.732

2√3 = 3.464

√5= 2.23

So, arranging the length from least to greatest is √3, √5, π, 2√3.

Learn more about Ascending Order here:

https://brainly.com/question/31324289

#SPJ1

Answer:

Molly earned $55.44 in interest at the end of six years.

Step-by-step explanation:

To calculate the interest earned by Molly's savings account, we can use the formula:

Interest = Principal x Rate x Time

where:

Principal is the initial amount of money deposited ($220.00)

Rate is the annual interest rate (4.2% or 0.042 as a decimal)

Time is the number of years the money is invested (6 years)

Plugging in the values, we get:

Interest = $220.00 x 0.042 x 6

Interest = $55.44

Therefore, Molly earned $55.44 in interest at the end of six years.

The lowest angle of elevation at which the astronomer can observe the star is 20.8°

We know that the angle of elevation is nothing but the angle between the horizontal line of sight and the straight line to a given object.

In this scenario, let us ssume that θ be an angle of elevation.

Since an astronomer is in the middle of the field,the 100 value is split in half.

The field is surrounded by the trees 20 m tall and the tripod holding the telescpoe 1 m above the ground.

This means that the vertical distance is 19 m and the horizontal distance is 50 m.

Consider the tangent of angle θ

tan(θ) = opposite side of angle θ / adjacent side of angle θ

tan(θ) = 19/50

tan(θ) = 0.38

θ = arctan(0.38)

θ = 20.8°

This is the angle of elevation.

Learn more about the angle of elevation here:

https://brainly.com/question/21137209

#SPJ1

A parabola is a U-shaped curve that can be formed by intersecting a cone with a plane that is parallel to one of its sides.

To find an equation of a parabola given the vertex and focus, we can use the following formula:

For a parabola with vertex (h, k) and focus (h, k + p), the equation is:

(x - h)^2 = 4p(y - k)

where p is the distance from the vertex to the focus.

If the focus is at (h + p, k), then the equation is:

(y - k)^2 = 4p(x - h)

where p is the distance from the vertex to the focus.

what is distance?

In the context of a parabola, the distance is the distance between the vertex and the focus, which is also known as the focal length. It is a constant value that determines the shape and size of the parabola.

To learn more about distance visit:

brainly.com/question/15172156

#SPJ11

The area under the standard normal curve to the right of z = 0.69 is approximately 0.2451.

Using a standard normal table:

Locate the row for 0.6 in the left-hand column of the table and the column for 0.09 along the top row of the table.

The intersection of the row and column gives the area to the left of z = 0.69, which is 0.7549.

Subtract this area from 1 to find the area to the right of z = 0.69:

area to the right of z = 0.69 = 1 - 0.7549 = 0.2451

Learn more about normal distribution on

https://brainly.com/question/4079902

#SPJ4

For a jar contains 5 red discs, 10 blue discs and m green discs,

a) The probability that the first disc selected is red is equals to

[tex]\frac{5}{15 + m}.[/tex]

b) The smallest value of m for which Var(X)< 0.6 is equals to 13.

We have a jar contains different colour discs. Number of red discs = 5

Number of green discs = m

Number of blue discs = 10

Total number of discs = 5 + 10 + m

= 15 + m

The process is performed four times, so, possible value n = 4. We have to determine the probability that the first disc selected is red.

a) Probability is defined as the ratio of favourable outcomes to the total possible outcomes. So, the probability that the first disc selected is red,[tex] P(red) = \frac{ 5}{(15 + m)}[/tex]

(b) The variance is calculated as

[tex]σ_{X²} = Var (X)[/tex]

[tex]= ∑_i (x_i − μ)² p(x_i) \\ [/tex]

= np(1 - p)

= [tex] 4(\frac{5}{15 + m})×(1- \frac{5}{15 + m}) < 0.6[/tex]

[tex] \frac{20( 10 - m)}{(15 + m)²} < 0.6[/tex]

=> 200 - 20m < 0.6( 15 + m)²

=> 200 - 20m < 9.0 + 0.6 m² + 18

=> 0.6m² + 20m - 200 + 27 > 0

=> 0.6m² + 20m - 173 > 0

=> m > 12.2075, so, m = 13

Hence, the smallest value of m for which Var(X)<0.6 is 13.

For more information about probability, refer: https://brainly.com/question/25870256

#SPJ4

The probability that the sample mean age is between 19 and 22 years is approximately 0.8186 or 81.86% (rounded to four decimal places).

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

We know that the sample mean age of 9 students follows a normal distribution with a mean of 21 years and a standard deviation of 3/sqrt(9) = 1 year (since the standard error of the mean is the standard deviation divided by the square root of the sample size).

To find the probability that the sample mean age is between 19 and 22 years, we first need to standardize the values using the standard normal distribution. We can do this by subtracting the mean and dividing by the standard error:

z1 = (19 - 21) / 1 = -2

z2 = (22 - 21) / 1 = 1

Now we need to find the probability that the sample mean falls between -2 and 1 standard deviations from the mean of the standard normal distribution. We can look this up in a standard normal distribution table or use a calculator:

P(-2 < Z < 1) = 0.8186

Therefore, the probability that the sample mean age is between 19 and 22 years is approximately 0.8186 or 81.86% (rounded to four decimal places).

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ4

The names of the radius , chord and diameter of a circle are as follow,

Radius of the circle are PQ, PM , And PR.

Diameter of the circle is QM

Chord of the circle is ON.

Length of QM in the circle = 4units.

In the attached figure of the circle,

Center of the circle is P.

radius of the circle is a distance from the center of the circle to its circumference.

Radius = PQ, PM , And PR.

Diameter of the circle passing through center P is QM.

Chord of the circle representing a line segment having endpoints on the circumference of the circle.

Chords are ON and MQ.

Diameter is the longest chord.

length of PR is 2 units,

PR is radius

QM is diameter

QM = 2(PR)

length of QM = 2(2)

                      = 4 units.

Therefore, for the given circle we have,

Radius are PQ, PM , And PR.

Diameter is QM

Chord is ON.

Length of QM = 4units.

learn more about circle here

brainly.com/question/28998766

#SPJ1

The above question is incomplete, the complete question is:

A circle with center P is shown in the figure below.

(a) Name a diameter:

(b) Name a radius:

(c) Name a chord:

(d) If the length of PR is 2 units, what is the length of QM

Attached figure.

Yes, it is true that if A is a 3×3 matrix and K is a scalar, then det(KA) = [tex]K^3[/tex] det(A).

To see why this is true, let's use the definition of the determinant of a matrix. For a 3×3 matrix A with entries[tex]ka_{11}, ka_{12}, ka_{13}, ka_{21}, ka_{22}, ka_{23}, ka_{31}, ka_{32}, ka_{33}[/tex], the determinant det(A) is given by:

[tex]det(A) = a11(a22a33 - a23a32) - a12(a21a33 - a23a31) + a13(a21a32 - a22a31)[/tex]

Now consider the matrix KA, where K is a scalar. The entries of KA are simply the entries of A multiplied by K. In other words, the entries of KA are:

[tex]ka_{11}, ka_{12}, ka_{13}, ka_{21}, ka_{22}, ka_{23}, ka_{31}, ka_{32}, ka_{33}[/tex]

Using the same formula as above, we can calculate the determinant of KA:

[tex]det(KA) = (K a_{11})(K a_{22})(K a_{33}) - (K a_{11})(K a_{23})(K a_{32}) - (K a_{12})(K a_{21})(K a_{33})+ (K a_{12})(K a_{23})(K a_{31}) + (K a_{13})(K a_{21})(K a_{32}) - (K a_{13})(K a_{22})(K a_{31)[/tex]

Substituting in the entries of KA, we get:

[tex]det(KA) = (K a_{11})(K a_{22})(K a_{33}) - (K a_{11})(K a_{23})(K a_{32}) - (K a_{12})(K a_{21})(K a_{33})+ (K a_{12})(K a_{23})(K a_{31}) + (K a_{13})(K a_{21})(K a_{32}) - (K a_{13})(K a_{22})(K a_{31)[/tex]

Simplifying this expression, we get:

[tex]det(KA) = K^3 (a_{11} a_{22}a_{33} - a_{11}a_{23}a_{32} - a_{12}a_{21}a_{33} + a_{12}a_{23}a_{31} + a_{13}a_{21}a_{32} - a_{13}a_{22}a_{31})[/tex]

But this is just the same as[tex]K^3[/tex] times the determinant of A! Therefore, we have shown that det(KA) =[tex]K^3[/tex]det(A) for any 3×3 matrix A and scalar K.

for such more question on matrix

https://brainly.com/question/31043586

#SPJ11

Question

Is it true that If A is a 3×3 matrix, then det (KA) = K^3 * det(A)

The triangle with sides a=13 mm, b=84 mm, and c=85 mm is a(n) right triangle. This is because it satisfies the Pythagorean theorem (a² + b² = c²). In this case, 13² + 84² = 169 + 7056 = 7225, and 85² = 7225, so the theorem holds true.

A right triangle is a triangle with two perpendicular sides and one angle that is a right angle (i.e., a 90-degree angle). The foundation of trigonometry is the relationship between the sides and various angles of the right triangle.

The hypotenuse, or side c in the illustration, is the side that is opposite the right angle. Legs are the sides that meet at the correct angle. Side a may be thought of as the side that is opposite angle A and next to angle B, whereas side b is the side that is next to angle A and next to angle B.

A right triangle is considered to be a Pythagorean triangle and its three sides are referred to as a Pythagorean triple if the lengths of all three of its sides are integers.

Visit here to learn more about  trigonometry : https://brainly.com/question/26719838
#SPJ11

Step-by-step explanation:

sqrt (50)    does NOT = 2 sqrt (10)

sqrt(50) = sqrt (2 *25) = 5 sqrt 2   = approx 7.1

Step-by-step explanation:

A, Jaclyn is not correct cause she make a product of √50 to 2√25 but it must be √2×25 then the answer will be 5√2 so she make √2 out from radical by 2 but it must be √2 itself

B, Then when we work √50 to simplest form it is 5√2

and √2 is 1.414 so 5×1.414 = 7.07 approximate to 7.1

One more time-consuming method to check for normality of a distribution that only works for large data sets is to use the Shapiro-Wilk test.

The Shapiro-Wilk test is a statistical test that checks whether a given sample of data comes from a normally distributed population. It works by calculating the test statistic W, which measures the deviation of the sample from a normal distribution. The test then compares the value of W to a critical value, which depends on the sample size and significance level.

While the Shapiro-Wilk test is a powerful tool for assessing normality, it is computationally intensive and may not be practical for smaller data sets. Moreover, it can be sensitive to sample size, so it may not provide reliable results for very small or very large samples.

In general, it is recommended to use multiple methods for checking normality, such as visual inspection of a histogram or Q-Q plot, in addition to formal statistical tests like the Shapiro-Wilk test.

for such more question on Shapiro-Wilk test

https://brainly.com/question/15980493

#SPJ11

A) A steer weighing 1000 pounds is 2.78 standard deviations below the mean.

B) A z-score of 1.85 is closer to the mean than a z-score of -2.78, we can conclude that a steer weighing 1000 pounds is more unusual than one weighing 1250 pounds.

A) To find how many standard deviations below the mean a steer weighing 1000 pounds is, we need to use the formula for standard score (or z-score):

z = (x - μ) / σ

where x is the weight of the steer, μ is the mean weight, and σ is the standard deviation. Substituting the values we have:

z = (1000 - 1150) / 54

z = -2.78

B) To determine which is more unusual, we need to compare the z-scores for a steer weighing 1000 pounds and one weighing 1250 pounds. Using the same formula as before:

For a steer weighing 1000 pounds:

z1 = (1000 - 1150) / 54

z1 = -2.78

For a steer weighing 1250 pounds:

z2 = (1250 - 1150) / 54

z2 = 1.85

A positive z-score means the weight is above the mean, while a negative z-score means the weight is below the mean. Therefore, a steer weighing 1250 pounds is 1.85 standard deviations above the mean, while a steer weighing 1000 pounds is 2.78 standard deviations below the mean.

for such more question on z-score

https://brainly.com/question/15222372

#SPJ11

The submarine depth after the dive is determined as 17 feet.

The current depth of the submarine is calculated as follows;

If the submarine is currently at a depth of -15 feet and then dives an additional 32 feet down, the new depth can be calculated by adding the two depths.

-15 feet + 32 feet = 17 feet

Therefore, the submarine is at a depth of 17 feet after the dive.

Learn more about depth here: https://brainly.com/question/1441593

#SPJ4

The area of the base of Barbara's woodshed is 72 square feet.

To find the area of the base of Barbara's woodshed, we need to know the shape of the base. In this case, the base is in the shape of a rectangle. A rectangle is a four-sided figure with opposite sides parallel and equal in length.

To calculate the area of a rectangle, we need to multiply its length by its width. In this case, the length of the rectangle is 12 feet, and its width is 6 feet. So, the area of the base of the woodshed is:

Area = Length x Width

Area = 12 ft x 6 ft

Area = 72 square feet

To know more about area here

https://brainly.com/question/14994710

#SPJ4

Complete Question:

Barbara built a woodshed. She made the base of the woodshed in the shape of the drawing. What is the area of the base of Barbara's woodshed? Include the unit. When the dimensions are given as 12 ft,6 ft, 11 ft and 7 ft.

The given relation is a set of four ordered pairs {(1, -2), (-2, 0), (-1, 2), (1, 3)}. The first element of each pair represents the input or domain value, and the second element represents the output or range value.

The domain of the relation is the set of all first elements of the ordered pairs, which is {1, -2, -1}. Notice that there are two ordered pairs with input value 1 and one ordered pair with input value -2 and -1. Therefore, we can simplify the domain as {-2, -1, 1}.

The range of the relation is the set of all second elements of the ordered pairs, which is {-2, 0, 2, 3}.

To check whether the relation is a function or not, we need to ensure that each input value (i.e., element of the domain) is associated with a unique output value (i.e., element of the range). In other words, there should not be more than one ordered pair with the same first element.

In this case, the input value 1 is associated with two different output values (-2 and 3), which violates the definition of a function. Therefore, the relation is not a function.

To make it a function, we can either remove one of the ordered pairs with input value 1 or change one of the output values associated with input value 1.

Learn more about range value.

https://brainly.com/question/30821383

#SPJ4

h = 11.9 cm

cos = adjacent/ hypotenuse

therefore:

cos(24) = h/ 13

rearrange:

h = 13cos(24)

put into calculator:

h = 11.8760...

rounded to one decimal point:

h = 11.9cm

There are 4 incongruent primitive roots and 6 has order 12 and it is a primitive root.

There are 12 elements of the group     \(U_{13}\)   , namely all the positive integers less than 13, as these are relatively prime to 13. Now, if there are primitive roots, there are     \(\phi (\phi (n))\)    of them. So we must compute     \(\phi (12) = \phi (4\times 3) = \phi (4) \phi (3) = 2\times 2 = 4\)   . There are 4 incongruent primitive roots.

To find them, take the powers each element in turn:

1, 2, 4, 8, 3, 6, 12, 11, 9, 5, 10, 7, 1  (2 has order 12, it is a primitive root)

Of course, the higher powers of 2 cannot be.

Proceeding this way, we get next get that 6, 7, and 11 are also primitive roots.

For example, the powers of 6 give: 6, 10, 8, 9, 2, 12, 7, 3, 5, 4, 11, 1. We see 6 has order 12 and it is a primitive root. So 2, 6, 7, 11.

Therefore, There are 4 incongruent primitive roots and 6 has order 12 and it is a primitive root.

To know more about primitive check below link:

https://brainly.com/question/30890271

#SPJ4

It is a true statement that when rainfall increases, the water level in the lake goes up. The rainfall is the independent variable in the situation.

The answer is yes because independent variable is the one that is manipulated or changed in an experiment. The dependent variable is the one that is observed or measured.

In this situation, rainfall is independent variable because it is what is being manipulated or changed. The water level in the lake is the dependent variable because it is what is being observed or measured.

Read more about independent variable

brainly.com/question/82796

#SPJ1

If another school is considering changing their pizza vendor, they may also select separate random samples of 50 freshmen, 50 sophomores, 50 juniors, and 50 seniors to gather feedback from the students. By doing so, they can obtain a representative sample of the entire student population and ensure that each grade level is equally represented.

This will provide valuable insight into the preferences and opinions of the students, allowing the school to make an informed decision on which pizza vendor to choose. It is important to consider the feedback of all students in the decision-making process to ensure that the majority of the student body is satisfied with the food options provided by the school.

Step 1: Select random samples of students from each grade level.
Step 2: Provide the new pizza to each student in the samples.
Step 3: Ask the students to evaluate the pizza based on taste and quality.
Step 4: Collect the feedback from all 200 students.
Step 5: Analyze the data to determine if the majority of students prefer the new pizza vendor.

Based on the analysis, the school can make an informed decision about whether to change their pizza vendor or not.

another school is also cosidering changing thier pizza vendor. the school selects seperate random samples of 50 freshman, 50 sophiomres, 50 jjuniors, and 50 seniors. each student tries

Learn more about pizza vendor here : brainly.com/question/13932830

#SPJ11

The probability that high school A will lose some state funding is approximately 0.0287 or 2.87%.

Probability is a way to gauge how likely something is to happen. Many things are difficult to predict with absolute certainty.

We can use the normal distribution to approximate the probability that high school A will lose some state funding. Let X be the number of absent students on the selected school day. We know that X follows a normal distribution with mean µ = 120 and standard deviation σ = 10.5.

We need to find the probability that X is greater than 140. To do this, we standardize X by subtracting the mean and dividing by the standard deviation:

Z = (X - µ) / σ = (140 - 120) / 10.5 = 1.90

We can now use a standard normal distribution table or calculator to find the probability that a standard normal variable is greater than 1.90. The result is approximately 0.0287.

Therefore, the probability that high school A will lose some state funding is approximately 0.0287 or 2.87%.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ4

If the price of corn feed is $4 and corn feed is on the horizontal axis, and the price of soybean feed is $5 and soybean feed lies on the vertical axis, then the expansion path is C =5S/2 (option a).

To find the expansion path, we need to find the optimal combination of inputs that will maximize pig production while keeping the cost of production at a minimum. This can be achieved by calculating the ratio of the prices of the two inputs, which is given by:

Price ratio = Price of soybean-based feed/Price of corn-based feed

Price ratio = 5/2

Now, we can use this price ratio to find the optimal combination of inputs that will minimize the cost of production while maximizing pig production. This can be done by solving for the quantity of soybean-based feed used in terms of the quantity of corn-based feed used:

S = (5/2)C

This equation represents the expansion path, which shows the optimal combination of inputs that will minimize the cost of production while maximizing pig production. We can prove this by substituting the value of S into the production function:

P = 8C + 25((5/4)C)

P = 8C + 31.25C

P = 39.25C

Hence the correct option is (a)

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Answer:  Hence, the length of swimming pool is 52 m and its breadth if 25 m.  

Step-by-step explanation:

The perimeter of rectangular swimming pool is 154 m and its length is 2 meter more than twice its breadth.

The algebraic expression for the number of hours Andrea spent studying this month is 2H - 14, where H represents the number of hours Jonah spent studying last month.

Let A represent the number of hours Andrea spent studying this month.

Since Andrea spent twice as many hours studying as Jonah this month, we can write

A = 2J

And since Jonah spent 7 fewer hours studying this month than last month, we can write

J = H - 7

Substituting J = H - 7 in the first equation, we get

A = 2(H - 7)

Simplifying this expression, we get

A = 2H - 14

Therefore, the algebraic expression for the number of hours Andrea spent studying this month is 2H - 14.

To know more about algebraic expression:

https://brainly.com/question/953809

#SPJ4