a light-rail commuter train accelerates at a rate of 1.45 m/s2. how long (in s) does it take to reach its top speed of 80.0 km/h, starting from rest?

The statement that is correct about the scenario is

C) From the moment of release to the moment it hits the ground, the system's total mechanical energy, which just contains the block, grows.

D) The block-Earth system's overall mechanical energy stays constant.

It also goes by the name ramp. Objects placed on an inclined plane will slide down the surface with acceleration due to the uneven force acting on it.

Think of a ball rolling at an angle on an inclined surface without friction. Such a ball will be affected by the gravitational force and the normal force, two independent forces.

Therefore, the correct options are C and D.

To learn more about the inclined plane, refer to the link:

https://brainly.com/question/29629164

#SPJ9

The values of electron mobility (µn) and hole mobility (µp) are 400 cm2/V·s and 150 cm2/V·s, respectively, the electrical conductivity can be calculated using formula: σ = ne(µn + µp)

Where σ is the electrical conductivity in units of S/m (siemens per meter), n is the charge carrier density in units of m-3, and e is the elementary charge in units of coulombs.

Converting  given mobilities to SI units, we have:

µn = 4.0 × 10-3 m2/V·s

µp = 1.5 × 10-3 m2/V·s

T = 490 K

Substituting values :

σ = ne(µn + µp)

= (1019 cm-3) × (1 m/100 cm)3 × (1.6 × 10-19 C) × (4.0 × 10-3 m2/V·s + 1.5 × 10-3 m2/V·s)

= 6.496 S/m

To know more about Electrical conductivity, here

https://brainly.com/question/29765686

#SPJ4

To calculate the moments of inertia of the system, we would need to know the masses and positions of the spheres relative to the axis of rotation.

The moment of inertia of an object is a measure of its resistance to rotational motion. It depends on both the mass and the distribution of mass within the object. When a system of spheres connected by a rod is rotated about one of the spheres, the distribution of mass in the system will be different compared to when it is rotated about a different sphere.

To determine whether the moments of inertia of the system when rotated about sphere a and sphere b are the same or different, we need to consider the distribution of mass in each case. If the system is symmetric about both spheres, then the moments of inertia will be the same. However, if the distribution of mass is different, then the moments of inertia will be different.

Learn more about rotational motion :

https://brainly.com/question/12995374

#SPJ4

Answer:

Explanation:

Wave speed = distance between two successive maxima / time for eight maxima to pass = 0.548 m / 11.4 s = 0.048 m/s

Electric potential energy = 8.99 x 10^-3 J and the temperature T = 2.01 x 10^7 K

What is the potential energy between two singly charged nuclei separated by a distance of 1.00 x 10^-12 m? Use Coulomb's constant (k= 8.99 x 10^9 N m^2/C^2) and assume the charges of the nuclei are +1. ?

where k is Coulomb's constant (k = 8.99 x 10^9 N m^2/C^2), q1 and q2 are the charges of the two nuclei (each with a charge of +1 since they are singly charged), and r is the separation distance between the nuclei (1.00 x 10^-12 m).

(a) The potential energy of two singly charged nuclei separated by a distance of 1.00 x 10^-12 m can be calculated using the Coulomb potential energy equation:

Electric potential energy = (k * q1 * q2) / r

where k is Coulomb's constant (k = 8.99 x 10^9 N m^2/C^2), q1 and q2 are the charges of the two nuclei (each with a charge of +1 since they are singly charged), and r is the separation distance between the nuclei (1.00 x 10^-12 m).

Plugging in the values, we get:

Electric potential energy = (8.99 x 10^9 N m^2/C^2) * (+1 C) * (+1 C) / (1.00 x 10^-12 m)

Electric potential energy = 8.99 x 10^-3 J

Therefore, the potential energy of two singly charged nuclei separated by a distance of 1.00 x 10^-12 m is 8.99 x 10^-3 J.

(b) We can use the average kinetic energy equation to find the temperature at which atoms of a gas will have an average kinetic energy equal to the electrical potential energy calculated in part (a):

(1/2)mv^2 = (3/2)kT

where m is the mass of a gas atom, v is the root-mean-square velocity of the atoms, k is Boltzmann's constant (k = 1.38 x 10^-23 J/K), and T is the temperature.

To solve for T, we can rearrange the equation:

T = (1/3)mv^2 / k

The mass of a gas atom can be approximated using the molar mass of the gas and Avogadro's number. Let's assume we are considering helium gas, which has a molar mass of approximately 4.00 g/mol. This is equivalent to approximately 6.64 x 10^-27 kg per helium atom.

The root-mean-square velocity of gas atoms can be found using the equation:

v = sqrt((3kT) / m)

We want to find the temperature at which the average kinetic energy of helium gas atoms is equal to the electrical potential energy calculated in part (a), so we can set (1/2)mv^2 equal to 8.99 x 10^-3 J:

(1/2)mv^2 = 8.99 x 10^-3 J

Substituting in the values for m and v, we get:

(1/2) * (6.64 x 10^-27 kg) * [(sqrt((3kT) / m))^2] = 8.99 x 10^-3 J

Simplifying, we get:

sqrt(3kT / m) = sqrt(2 * 8.99 x 10^-3 J / 6.64 x 10^-27 kg)

sqrt(3kT / m) = 2427.5 m/s

Squaring both sides, we get:

3kT / m = (2427.5 m/s)^2

Solving for T, we get:

T = (m / 3k) * (2427.5 m/s)^2

Substituting in the values for m and k, we get:

T = (6.64 x 10^-27 kg / (3 * 1.38 x 10^-23 J/K)) * (2427.5 m/s)^2

T = 2.01 x 10^7 K

therefore the temperature was found to be about  T = 2.01 x 10^7 K

To learn more about potential energy follow the given link: https://brainly.com/question/16705765

#SPJ4

Answer:

Explanation:

Q=278*126.85*900=31,737,870J

Acceleration of the player over the first 16 yards is 48/t^2 = 140.68 m/s^2, the maximum speed is 48/t = 80.86 m/s (or about 181 miles per hour), and the time duration of the acceleration is 0.593 seconds.

First, we can find the acceleration :

[tex]d = (1/2)at^2[/tex]

[tex]t = sqrt(2d/a) = sqrt(2*14.63/a)[/tex]

[tex]t2 = 4.25 - t1[/tex]

We can use equations of motion for uniform acceleration for maximum speed. The equations are:

[tex]v = u + at[/tex]

[tex]s = ut + (1/2)at^2[/tex]

[tex]v^2 = u^2 + 2as[/tex]

where u is the initial velocity, v is the final velocity, s is the distance covered, a is acceleration.

[tex]v = u + at = at[/tex]

[tex]v^2 = u^2 + 2as[/tex]

[tex]v^2 = 2as[/tex]

Substitute expressions for v and s from two equations,

[tex]a^2t^2 = 2a(24)[/tex]

[tex]a = 48/t^2[/tex]

[tex]v = at[/tex]

[tex]v = 48t/t^2 = 48/t[/tex]

To find the time duration of the acceleration, we can solve the equation for t in terms of a:

[tex]t = sqrt(2d/a) = sqrt(2*14.63/a)[/tex]

[tex]t = sqrt(2*14.63/(48/t^2)) = 0.593 seconds[/tex]

To know more about Acceleration, here

https://brainly.com/question/12550364

#SPJ4

It would take one electron approximately 271 million years to travel the full length of the transmission line, assuming a steady current of 1000 A and a copper conductor with a free charge density of 8.5 x 10^28 electrons per cubic meter.

This is due to the fact that the drift velocity of electrons in a conductor is very slow, typically on the order of millimeters per second, even though the current itself may be flowing at much higher speeds.

[tex]v_d = I / (nAq)[/tex]

We can rearrange this equation to solve for the time it takes for an electron to travel a distance d:

[tex]t = d / v_d = (dqA) / I[/tex]

[tex]t = (200 km * 1000 m/km * 8.5 x 10^28 electrons/m^3 * (π(0.01 m)^2/4) * 1.6 x 10^-19 C/electron) / (1000 A)[/tex]

[tex]t = 8.53 x 10^15 seconds[/tex]

This is equivalent to approximately 271 million years.

To know more about Transmission line, here

https://brainly.com/question/14902531

#SPJ4

A NASA orbiter recently captured craters and formations on mars that resembled the face of a bear's face.

NASA’s Mars surveillance orbiter camera captured an unusual conformation that — much to the delight of scientists and space watchers looked like the shape of a bear’s face, hundreds of millions of long hauls down.

The “ nose ” is actually a hill in the shape of the letter V; its “ eyes ” are two small, crooked craters, according to the University of Arizona, which participated its analysis of the print last week.

The circle making up the “ head ” — what the university called “ the indirect fracture pattern ” — “ might be due to the settling of a deposit over a buried impact crater. ”

Learn more about Orbiter:

https://brainly.com/question/30406599

#SPJ4

Answer:

Explanation:

The vapor pressure of a sugar solution is dependent on several factors:

Concentration of the solution: The concentration of the sugar solution affects its vapor pressure. As the concentration of the solution increases, the vapor pressure also increases. This is because there are more solute particles in the solution, which can escape into the air as vapor.

Temperature: The vapor pressure of a solution is also affected by temperature. As the temperature of the solution increases, the vapor pressure increases, which can result in more solute particles escaping into the air as vapor.

Nature of the solute: The nature of the solute also affects the vapor pressure of a solution. Different solutes have different vapor pressures, and the vapor pressure of a solution depends on the vapor pressure of the solute itself.

Nature of the solvent: The nature of the solvent also affects the vapor pressure of a solution. Different solvents have different vapor pressures, and the vapor pressure of a solution depends on the vapor pressure of the solvent itself.

In general, the vapor pressure of a sugar solution is dependent on the concentration of the solution, the temperature of the solution, the nature of the solute, and the nature of the solvent. Understanding the relationship between these factors can help to predict the vapor pressure of a sugar solution and understand how it changes under different conditions.

The frictional force is  -156 N.

Friction is the force that opposes motion between two surfaces that are in contact. Frictional force acts in the opposite direction of the intended motion and acts to slow down or stop an object from moving. The magnitude of the frictional force depends on several factors, including the types of surfaces in contact, the normal force acting on the object, and the coefficient of friction between the two surfaces.

In this case, we can see that the frictional force would act in the opposite direction thus its magnitude would be;

Frictional force = - mgcosθ

= -20.91 * 9.8 * cos 40.29

= -156 N

Learn more about friction:https://brainly.com/question/13000653

#SPJ1

The rest mass of a spacecraft is 620,000 tons. Its mass would be 715,088.8 tons if you could measure it when it was moving at half the speed of light.

The mass of a moving object is given by the relativistic mass formula:

[tex]m = m_0 / \sqrt{(1 - v^2/c^2)}[/tex]

here,

m₀ is rest mass of the object,

v is velocity, and

c is speed of light.

In this case, the rest mass of the spaceship is m₀ = 620,000 tons. If it is traveling at half the speed of light, its velocity is v = 0.5c, where c is approximately 299,792,458 m/s.

Reserving the values:-

[tex]m = m_0 / \sqrt{(1 - v^2/c^2)}[/tex]

= [tex]620,000 tons / \sqrt{(1 - (0.5c)^2/c^2)}[/tex]

=[tex]620,000 tons / \sqrt{(1 - 0.25)}[/tex]

= [tex]620,000 tons / \sqrt{(0.75)}[/tex]

= 620,000 tons / 0.866

= 715,088.8 tons

Therefore, the mass of the spaceship when it is traveling at half the speed of light is approximately 715,088.8 tons. Note that the relativistic mass of an object increases as its velocity approaches the speed of light. At speeds much smaller than the speed of light, the relativistic mass is approximately equal to the rest mass.

To know more about mass please refer: https://brainly.com/question/29038134

#SPJ4

Steep curve represents the isobaric processes in thermodynamics process.

In a thermodynamic process, an isobaric process is a process that occurs at a constant pressure. Therefore, the curve that shows an isobaric process would be a horizontal line on a graph where the y-axis represents pressure and the x-axis represents volume or temperature.

On the intuitive level, temperature is associated with notions hot” and cold”. The experience shows that if hot and cold bodies are brought in contact, their temperatures would eventually equilibrate. Consider a system in a thermal contact with the bath and make a quasi-static compression or expansion of the system plotting its states in the (P, V ) diagram.

As the bath is large, its temperature remains unchanged and as the process is slow, the temperature of the system will have the same unchanged value. In this way one obtains the isothermal curve, or isotherm, in the (P, V ) plot.

Hence the correct option is b.

To know more about isobaric here

https://brainly.com/question/8718658

#SPJ4

Your perceived weight is equal to the normal force. Therefore, when the elevator accelerates upward or downward, you truly feel a little heavier than usual and a little lighter than usual.

(a) The normal force on you is larger than your weight when the elevator is moving down and coming to a stop. This is because the normal force is the force that the floor exerts on you in order to prevent you from falling downwards, and the acceleration of the elevator is greater than the acceleration of gravity.

(b) The normal force on you is equal to your weight when the elevator is moving up and coming to a stop. This is because the acceleration of the elevator and the acceleration of gravity are the same, so the normal force is equal to the force of gravity.

(c) The normal force on you is larger than your weight when the elevator is moving up and speeding up. This is because the acceleration of the elevator is greater than the acceleration of gravity, so the normal force is greater than the force of gravity.

(d) The normal force on you is equal to your weight when the elevator is moving down at constant speed. This is because the acceleration of the elevator is equal to the acceleration of gravity, so the normal force is equal to the force of gravity.

To learn more about normal force click here https://brainly.com/question/13340671

#SPJ4

Gravity is a fundamental force of nature that exists between any two objects that have mass. It is an attractive force that pulls objects toward each other. The net force on the parachute/teacher system is 763 N up.

The force of gravity is directly proportional to the masses of the objects and inversely proportional to the distance between them. The more massive the objects and the closer they are, the stronger the force of gravity between them.

The force of gravity on the parachute/teacher system is 637 N down.

[tex]F_gravity = m \times g[/tex]

Where m is the mass of the teacher and parachute system, and g is the acceleration due to gravity, which is approximately 9.8 m/s^2 near the surface of the Earth.

[tex]F_gravity = 65 kg \times 9.8 m/s^2 = 637 N down[/tex]

The net force is the vector sum of the forces acting on the system. In this case, there are two forces acting on the system: the force of gravity (637 N down) and the air resistance (1400 N up).

The net force is given by:

[tex]F_net = F_drag - F_gravity[/tex]

where  [tex]F_drag[/tex]  The air resistance [tex](1400 N[/tex]Up).

So,

[tex]F_net = 1400 N[/tex]  [tex]up – 637 N[/tex] down = [tex]763 N[/tex]up

Therefore, the net force on the parachute/teacher system is [tex]763 N[/tex] Up.

Learn more about gravity here:

https://brainly.com/question/4014727

#SPJ1

The power rating of an engine that has maximum performance which performs 19800 j of work in 95 minutes is 3.46kW.

Power is calculated by the equation Power = Work / Time.

Power is the rate at which work is done or energy is transferred or converted. It is the rate at which work is done or energy is transformed from one form to another. It is commonly expressed in watts (W) or joules per second (J/s). Power is the product of work and time. The amount of work done is determined by the amount of time it takes for the work to be completed, and the amount of power is determined by the amount of work accomplished in a given amount of time.

Power rating = 19800 J / (95 minutes x 60 seconds/minute)

Power rating = 19800 J / 5700 s

Power rating = 3.46 kW

To learn more about work click here https://brainly.com/question/18094932

#SPJ4

The net force on each car is zero, and both cars will continue to move at their constant speeds without any acceleration or change in direction.

According to Newton's third law of motion, every action has an equal and opposite reaction.

Let's calculate the magnitude of the force exerted by car A on car B and vice versa:

The force (F) is given by the formula:

[tex]F = m * a[/tex]

where m is the mass of the car and a is the acceleration it experiences.

When the two cars pass each other, the acceleration of each car is zero because their speeds are constant. Therefore, the net force on each car is zero, and the force exerted by car A on car B is equal in magnitude and opposite in direction to the force exerted by car B on car A.

The force exerted by car A on car B is:

[tex]F_{AB} = m_A * a_A[/tex]

where [tex]m_A = 500 kg[/tex] and [tex]a_A = 0 m/s^2[/tex] (constant speed)

[tex]F_{AB} = 500 kg * 0 m/s^2 = 0 N[/tex]

Similarly, the force exerted by car B on car A is:

[tex]F_{BA} = m_B *a_B[/tex]

where [tex]m_B = 800 kg[/tex] and [tex]a_B = 0 m/s^2[/tex] (constant speed)

[tex]F_{BA} = 800 kg * 0 m/s^2 = 0 N[/tex]

As we can see, both forces are zero. Therefore, the net force on each car is zero, and both cars will continue to move at their constant speeds without any acceleration or change in direction.

Learn more about acceleration :

https://brainly.com/question/12550364

#SPJ4

The force that magnets use to either attract or repel one another is known as magnetism. Electric charges in motion are what generate magnetism.

The smallest building blocks of matter are called atoms. There are electrons in every atom, which are charged particles. The electrons that make up an atom's nucleus, or core, spin like tops.

The magnetism of most things is cancelled out by the equal amounts of electrons that spin in opposing directions. Because of this, substances like fabric and paper are referred to as weakly magnetic.

Most electrons in materials like iron, cobalt, and nickel spin in the same direction. The atoms in these become this way.

Therefore, The force that magnets use to either attract or repel one another is known as magnetism. Electric charges in motion are what generate magnetism.

To learn more about Magnetism, refer to the link:

https://brainly.com/question/2841288

#SPJ9

In a case whereby a cup dropped from a certain height which breaks into peices the energy changes that are involved are:

The process of turning one form of energy into another is known as energy conversion. Since energy is a variable that is capable of conservation, any change in energy in systems can only be made by removing or adding energy from it.

First, because of its height, it possesses potential energy (P.E. ), which when dropped transforms into kinetic energy (K.E. ), which pushes the object downward, as well as heat energy through friction and collisions with air molecules. Its K.E is transformed into sound energy as it hits the ground, and some energy is used to break the cup into pieces.

Learn more about energy at:

https://brainly.com/question/8101588

#SPJ1

Oscillation is the regular back and forth motion of a periodic wave, while propagation is the process of transferring a signal from one point to another. Oscillation and propagation are important concepts in physics and engineering, as they are used to understand, model, and control the behavior of various physical systems. Oscillation and propagation are also used to understand and manipulate the behavior of light, sound, and other forms of energy.

As the length of the string attached to the pendulum increases, its frequency decreases. Hence, the frequency of shorter string will be higher. The frequency of the string is 0.13 Hz and the length of pendulum is 16 m.

Frequency of an oscillation is the number of wave cycles per unit time. It is the inverse of time period. As the length of the pendulum increases, the frequency of oscillation decreases. Therefore, the shorter pendulum will have greater frequency.

Given time period of pendulum = 8 s.

then length of pendulum L = T²/4π² g.

l = 8²/4×π² × 9.8 m/s² = 16 m.

Frequency of the oscillation is the inverse of its time period. Hence, the frequency of the pendulum for a time period of 8 Hz is :

1/8 = 0.13 Hz.

Therefore, option a is correct.

Find more on frequency:

https://brainly.com/question/14926605

#SPJ1

The velocity of the motorist when he/she reaches the deer is calculated to be 9.96 m/s.

Speed of the motorist is given as 12 m/s.

The maximum acceleration is given as -6 m/s².

Distance = 39 m

Let x be the distance traveled by motorist in his/her reaction time.

Remaining 39-x will be travelled with -6 m/s².

Let us find x with the known values,

s = 39 - x

v = 0

u = 12 m/s

v² - u² = 2 a s

0 - 12² = 2 (-6) (39-x)

-144 = -12 (39-x)

(39-x) = 12

39 - 12 = x

x = 27 m

So, the motorist travelled 27 m in his/her reaction time.

12 t = 27

t = 2.25 s

b) If the reaction time is 3.56 s,

Then distance traveled in his reaction time,

x₀ = 12 × 3.56 = 42.72 m

Remaining distance = 39 - 42.72 = -3.72 m

Motorist is ahead by 3.72m.

Its velocity when it reaches the deer,

v² - u² = 2 a s

v² - 12² = 2 (-6) (3.72)

v² = 144 - 44.62

v² = 99.36

v = 9.96 m/s

The given question is incomplete. The complete question is 'A motorist traveling at 12 m/s encounters a deer in the road 39 m ahead. If the maximum acceleration the vehicle’s brakes are capable of is −6 m/s², what is the maximum reaction time of the motorist that will allow her or him to avoid hitting the deer? Answer in units of s. 015 (part 2 of 2) 10.0 points If his or her reaction time is 3.56429 s, how fast will (s) he be traveling when (s)he reaches the deer? Answer in units of m/s.'

To know more about speed:

https://brainly.com/question/13292377

#SPJ4

Answer:

2 N backward

Explanation:

Positive direction is forward.

Fnet = 6 N - 8 N = -2 N

Negative sign in the result means the net force is 2 N backward

a) The energy stored in the capacitor is 5.10 × 10⁻¹⁰ J.

b) The energy stored in the capacitor with the dielectric inserted is 1.04 × 10⁻⁹ J.

c)  The energy stored in the capacitor with the dielectric inserted and the battery disconnected is 2.14 × 10⁻¹⁰ J.

The energy stored in a parallel-plate capacitor is given by the formula:

U = [tex]\frac{1}{2}CV^2[/tex]

where U is the energy stored, C is the capacitance, and V is the voltage across the capacitor.

(a) The capacitance of a parallel-plate capacitor is given by the formula:

C = [tex]\frac{\epsilon_0A}{d}[/tex]

where [tex]\epsilon_0[/tex] is the permittivity of free space, A is the area of the plates, and d is the distance between them.

Substituting the given values, we have:

C =[tex]\frac{(8.85 \times 10^{-12} \textrm{ F/m})(2.00 \times 10^{-4} \textrm{ m}^2)}{5.00 \times 10^{-3} \textrm{ m}} = 7.08 \times 10^{-12} \textrm{ F}[/tex]

The voltage across the capacitor is given by the battery voltage, which is 12.0 V. Substituting these values into the formula for energy, we have:

U = [tex]\frac{1}{2}(7.08 \times 10^{-12} \textrm{ F})(12.0 \textrm{ V})^2 = 5.10 \times 10^{-10} \textrm{ J}[/tex]

(b) When a dielectric is inserted between the plates, the capacitance increases. The new capacitance is given by the formula:

[tex]C' = \kappa C[/tex]

where [tex]\kappa[/tex] is the dielectric constant of the material.

Substituting the given values, we have:

[tex]C' = (2.56)(7.08 \times 10^{-12} \textrm{ F}) = 1.82 \times 10^{-11} \textrm{ F}[/tex]

The voltage across the capacitor remains the same, so the energy stored in the capacitor becomes:

[tex]U' = \frac{1}{2}(1.82 \times 10^{-11} \textrm{ F})(12.0 \textrm{ V})^2 = 1.04 \times 10^{-9} \textrm{ J}[/tex]

(c) If the battery is disconnected before the dielectric is inserted, the charge on the plates remains the same. However, the voltage across the capacitor decreases due to the increased capacitance. The new voltage is given by the formula:

[tex]V' = \frac{V}{\kappa}[/tex]

Substituting the given values, we have:

[tex]V' = \frac{12.0 \textrm{ V}}{2.56} = 4.69 \textrm{ V}[/tex]

The energy stored in the capacitor becomes:

[tex]U' = \frac{1}{2}(1.82 \times 10^{-11} \textrm{ F})(4.69 \textrm{ V})^2 = 2.14 \times 10^{-10} \textrm{ J}[/tex]

for such more question on capacitor

brainly.com/question/14811408

#SPJ4

Option A is correct, While their longitudes are different, Beijing and Philadelphia are essentially at the same latitude. As a consequence, both of these places will have a similar night sky tonight.

Because of the Earth's orbit of the sun, the apparent locations of the star's various constellations in the night sky fluctuate throughout the year. The latitude of the observer and the Earth's rotation, however, govern the locations of the stars and constellations at any given moment.

The same stars as well as constellations would be visible in both Beijing and Philadelphia since they are located at a similar latitudes.

The night sky will appear to spin around a particular perspective for each location, however, because of their varying longitudes, which will cause some variations in the constellations that are visible.

Learn more about the night sky at

https://brainly.com/question/3037966

#SPJ4

The question is -

Beijing and Philadelphia have about the same latitude but very different longitudes. what can be said about tonight's night sky in these two places?

a. the sky will have completely different sets of constellations.

b. the sky will look about the same.

c. the sky will have partially different sets of constellations.

(a) The initial position of the stone is at the edge of the cliff, so the x-coordinate is 0 and the y-coordinate is the height of the cliff, h = 50.0 m.

(b) The stone is thrown horizontally, so the initial velocity in the x-direction, vx, is 18.0 m/s and the initial velocity in the y-direction, vy, is 0 m/s.

(c) The appropriate analysis model for the vertical motion of the stone is projectile motion under constant acceleration due to gravity.

(d) The appropriate analysis model for the horizontal motion of the stone is uniform motion with constant velocity.

(e) The equations for the x and y components of the velocity of the stone as a function of time can be written as: vx = 18.0 m/s (constant)

vy = -gt (where g is the acceleration due to gravity, and t is time)

(f) The equations for the position of the stone as a function of time can be written as: x = vx t, y = h + vy t - 1/2 g t^2

(g) The stone strikes the water below the cliff after about 3.19 seconds.

(h) The stone lands with a speed of about 30.0 m/s and an angle of impact of about 26.5 degrees below the horizontal.

(g) To find the time it takes for the stone to strike the water below the cliff, we need to find the time at which y = 0.

Substituting y = 0 and h = 50.0 m into the equation for y, we get:

0 = 50.0 m - 1/2 g t^2

t = sqrt(2h/g)

= [tex]\sqrt{(2*50.0 m/9.81 m/s^2)[/tex] ≈ 3.19 s

(h) To find the speed and angle of impact,

we need to find the final velocity of the stone just before it hits the water.

The final velocity can be found using the equation:

v^2 = vx^2 + vy^2 + 2gy

Substituting the values we know, we get:

[tex]v^2 = (18.0 m/s)^2 + (-9.81 m/s^2)(3.19 s)^2 + 2(9.81 m/s^2)(50.0 m)[/tex]

v ≈ 30.0 m/s

The angle of impact can be found using the equation:

tan(theta) = vy/vx

Substituting the values we know, we get:

[tex]theta = tan^-1(vy/vx) = tan^-1\frac{(\frac{(-9.81 m/s^2)}{(3.19 s)}}{18.0} m/s)[/tex]

≈ -26.5 degrees

For more questions on Angle of Impact

https://brainly.com/question/12262372

#SPJ4

All of the tubes in the load must have an opposite mate in the rotor holder in order for the centrifuge to be balanced. Option C is correct.

Different laboratories employ centrifuges to separate fluids, gases, or liquids based on density. Centrifuges are frequently employed for the purification of cells, organelles, viruses, proteins, and nucleic acids in both research and clinical facilities.

The division of whole blood components using a centrifuge is an example of its utilisation in a clinical environment. Various tests call for serum or plasma, which can be obtained using centrifugation.

By allowing a full blood sample to coagulate at room temperature, serum may be extracted. After centrifuging the sample, the clot is eliminated, leaving a serum supernatant.

In contrast to serum, plasma is made from whole blood that has not been allowed to clot and contains both serum and clotting agents. A full blood sample is drawn into anticoagulant-treated tubes in order to extract plasma.

Learn more about Centrifuge here:

https://brainly.com/question/17065689

#SPJ4

The displacement of the train to the west is 478 km.

To find the displacement to the west, we need to use the Pythagorean theorem, which states that in a right triangle, the square of the length of the hypotenuse (the straight-line distance from the starting point to the ending point) is equal to the sum of the squares of the lengths of the other two sides.

Let's call the displacement to the west "x". Then, the displacement to the south is 42 km, and the total displacement (the distance traveled by the train) is 478 km. Using the Pythagorean theorem, we can write the following equation:

x^2 + 42^2 = 478^2

Expanding the squares:

x^2 + 42^2 = 478^2

x^2 + 1764 = 229284

x^2 = 227620

x = 478 km

Learn more about displacement here: https://brainly.com/question/2109763

#SPJ1

Answer:

Explanation:

Angular velocity is measured in angle per unit time or radians per second (rad/s). The rate of change of angular displacement is angular velocity.

Displacement in such motion is in the form of angle and hence known as angular displacement.

...

\theta = wt + 1/2 \alpha t^{2}

\theta the angular displacement of the object

s distance covered by the object on the circular path

r the radius of curvature of the given path

\omega initial angular velocity

t time

The time for a steel ball to hit the ground when shot horizontally off a table is independent of the initial velocity, and the formula is [tex]d = v_i*t + (1/2)at^2[/tex].

To decide the time it takes for a steel ball to stir things up around town when shot evenly off a table, we can utilize the conditions of movement, explicitly the kinematic condition:

[tex]d = v_i*t + (1/2)at^2[/tex]

where:

d is the distance voyaged

v_i is the underlying speed

an is the speed increase

t is the time

We can expect that the speed increase is because of gravity, which is steady and equivalent to [tex]9.81 m/s^2.[/tex]

Since the ball is shot on a level plane, its underlying vertical speed is zero. Accordingly, we can work on the situation to:

[tex]d = (1/2)at^2[/tex]

Settling for t, we get:

t = sqrt(2*d/a)

To decide the distance voyaged, we can utilize the way that the ball will follow an explanatory direction and will stir things up around town simultaneously it would have taken to fall upward from a similar level. Hence, we can involve the condition for the time it takes for an item to in an upward direction fall:

t = sqrt(2*h/g)

where h is the level of the table and g is the speed increase because of gravity.

Utilizing the trial information, we can decide the level of the table and the distance the ball goes prior to stirring things up around town for every speed setting of the launcher. Then, we can work out the time it takes for the ball to stir things up around town involving the condition for t.

The time it takes for the ball to stir things up around town will be the equivalent no matter what the speed setting of the launcher, as long as the ball is shot evenly with a similar starting level. This is on the grounds that the underlying speed in the level bearing doesn't influence the time it takes for the ball to upward fall.

This outcome is steady with the way that the time it takes for an item to fall upward just relies upon the level and speed increase because of gravity. Hence, failing upward from the table top to the floor beneath would bring about a similar time it takes for the ball to raise a ruckus around town when shot evenly off the table.

To learn more about kinematics, refer:

https://brainly.com/question/15375616

#SPJ4

The complete question is:

If the steel ball is shot horizontally off the table, how much time would it take the ball to hit the ground for each of the velocity settings of the launcher? Explain your answer using the equations of motion and your experimental data. How does this relate to the ball being dropped vertically from the table top to the floor below.