A merry-go-round is spinning at a fixed rate. As a person is walking toward the edge,
A) the force of static friction such that the person does not slide off remains the same.
B) the force of static friction must increase in order for the person not to slide off.
C) the force of static friction must decrease in order for the person not to slide off.

So, the length of the string is approximately 0.244 meters.

f = (1/2L) * sqrt(T/m)

where f is the frequency, L is the length of the string, T is the tension, and m is the mass per unit length.

We can rearrange this equation to solve for L:

L = (1/2) * sqrt(T/m) * (1/f)

Plugging in the given values, we get:

L = (1/2) * sqrt(140 N / 0.010 kg) * (1/100 Hz)
L = (1/2) * sqrt(14000) * (0.01)
L = 0.118 meters

Therefore, the length of the string is 0.118 meters, or 118 centimeters.

To find the length of the string with a tension of 140 N, a total mass of 0.010 kg, and a second harmonic frequency of 100 Hz, we can use the formula for the frequency of a vibrating string: f = (1/2L) * sqrt(T/μ), where f is frequency, L is the length, T is tension, and μ is the linear mass density.

First, find the linear mass density (μ): μ = total mass / length. Since we have the total mass (0.010 kg), we can rewrite the formula as: μ = 0.010 / L.

Next, we know that the second harmonic frequency is 100 Hz, which is twice the fundamental frequency (f1). So, the fundamental frequency (f1) is 50 Hz. Now, substitute the values into the frequency formula:

50 = (1/2L) * sqrt(140 / (0.010 / L))

Square both sides to eliminate the square root:
2500 = 1/(4L^2) * (140L)

Rearrange and solve for L:
L^3 = 140 / (4 * 2500)
L^3 = 0.014
L = ∛(0.014) ≈ 0.244 meters

To know more about frequency visit:-

https://brainly.com/question/29739263

#SPJ11

To find the angular frequency of the resulting vibration, we can use the equation: ω = √(k/m),where ω is the angular frequency, k is the spring constant, and m is the mass of the block. We know that the block has a mass of 0.50 kg and drops 0.1 m before coming to rest, which means it reaches its maximum displacement from equilibrium. At this point, the spring is stretched by a distance of 0.1 m. Therefore, the angular frequency of the resulting vibration is 9.905 rad/s.

We can use this information to calculate the spring constant:
k = F/x
where F is the force exerted by the spring and x is the displacement from equilibrium. The force exerted by the spring is equal to the weight of the block, which is given by:
F = m*g
where g is the acceleration due to gravity. Substituting the values, we get:
F = 0.50 kg * 9.81 m/s² = 4.905 N
The displacement from equilibrium is 0.1 m. Therefore:
k = 4.905 N / 0.1 m = 49.05 N/m
Now we can use the equation for angular frequency to find the answer:
ω = √(k/m) = √(49.05 N/m / 0.50 kg) = √(98.1 rad/s²) = 9.905 rad/s

to know more about angular frequency visit:

https://brainly.com/question/14103673

#SPJ11

The magnitude of the current in the wire is 1.7 mA, which is option B.

The magnetic field produced by a long straight wire carrying current is given by the formula:

B = (μ0 / 2π) * (I / r)

where B is the magnetic field, I is the current in the wire, r is the distance from the wire, and μ0 is the permeability of free space.

In this problem, we are given B = 0.0050 × 10-4 T and r = 3.0 mm = 0.0030 m. Substituting these values into the formula, we get:

0.0050 × 10-4 T = (4π × 10-7 T · m/A / 2π) * (I / 0.0030 m)

Simplifying, we get:

I = (0.0050 × 10-4 T) * (0.0030 m) / (4π × 10-7 T · m/A) = 1.7 mA

Therefore, the magnitude of the current in the wire is 1.7 mA, which is option B.

Learn more about current here:

https://brainly.com/question/31051853

#SPJ11

If you have a flashlight in a vacuum, you would not be able to see the beam of light. This is because the vacuum is a space devoid of any matter, including air.

The beam of light requires a medium to travel through, and in the absence of a medium, it would not be visible to the human eye.
When a beam of light travels through air, it interacts with the air molecules, which scatter the light in all directions. This is why we can see a beam of light in a dark room or a foggy day. However, in a vacuum, there are no air molecules to scatter the light.
It is important to note that while the beam of light would not be visible, it would still exist. This is because light is a form of electromagnetic radiation and does not require a medium to travel through.
In summary, if you have a flashlight in a vacuum, you would not be able to see the beam of light, but it would still exist as electromagnetic radiation.

To know more about beam of light visit:

https://brainly.com/question/29589576

#SPJ11

To determine the distance between the candle and the lens for the two locations where a focused image is projected onto the wall, you would need to know the focal length of the lens being used. Once you know the focal length, you can use the formula 1/f = 1/di + 1/do, where f is the focal length, di is the distance between the lens and the image, and do is the distance between the lens and the object (in this case, the candle).

Assuming the lens is placed between the candle and the wall, there will be two locations where a focused image is projected onto the wall: one closer to the lens and one farther away. The distance between the candle and the lens for each location will depend on the focal length of the lens and the distance between the lens and the wall.
Without knowing these distances or the focal length of the lens, it is impossible to determine the specific distance between the candle and the lens for the two locations where a focused image is projected onto the wall.

Learn more about distance at

https://brainly.com/question/3171380

#SPJ11

Yes, an object with momentum always has energy. Momentum is defined as the product of an object's mass and velocity, while kinetic energy is defined as 1/2 the product of an object's mass and the square of its velocity. Thus, an object with momentum is always moving, and therefore has kinetic energy as well.

No, an object with energy does not always have momentum. Energy and momentum are two separate and distinct physical quantities. Energy is a scalar quantity that describes the ability of an object to do work, while momentum is a vector quantity that describes the motion of an object.

However, an object with energy does not necessarily have momentum. While kinetic energy is directly related to an object's momentum, there are other forms of energy, such as potential energy or thermal energy, that are not directly related to momentum. For example, a stationary object on a high shelf has potential energy due to its position, but it has no momentum.

It's also worth noting that in some cases, an object may have momentum without having kinetic energy. For example, an object with mass at rest in a gravitational field has no kinetic energy, but it has momentum due to its mass.

Does an object with energy always have momentum?

It is possible for an object to have energy without having momentum, such as a stationary object that has potential energy due to its position in a gravitational field or a charged object that has potential energy due to its position in an electric field. These objects have no momentum because they are not moving.

Conversely, it is also possible for an object to have momentum without having energy, such as an object that is moving very slowly or an object that is at rest relative to an observer. These objects have momentum because they have mass and are in motion, but they may not have any kinetic energy if they are moving slowly or are at rest.

Learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

Answer:

If an atom's outer shell of electrons is loosely bound to the nucleus, the substance is a good conductor.

The structure of atoms in a substance determines the substance's conductivity is, If an atom's outer shell of the electron is loosely bound to the nucleus, then the substance is a good conductor. Hence, option C is correct.

Substances are differentiated into three types based on the electrons present in the valence shell. The valence shell is the outermost orbital of the atom and the electrons present in it are called valence electrons. The valence electrons are said to be free electrons and these electrons do not involve in chemical bonding.

The types of materials are conductors, insulators, and semiconductors. The material that has free electrons and carries current or heats through it is called a conductor. The materials that do not have free electrons and it does not carry current or heat are called insulators. The material that partially conducting and partially insulating are called semi-conductors.

Hence, the conductivity of the substance is determined by an atom's outer shell of the electron being loosely bound to the nucleus, the substance is a good conductor.

Hence, the ideal solution is option C.

To learn more about Conductivity:

https://brainly.com/question/21496559

#SPJ2

The frequency of the electric field is 90.0 kHz, and its rms strength is 0.707 V/m. The direction of its oscillations is horizontal, perpendicular to the direction of wave propagation.

In an electromagnetic (EM) wave, the electric field and magnetic field are perpendicular to each other and perpendicular to the direction of wave propagation. Therefore, if the magnetic field oscillates up and down vertically, the electric field must oscillate horizontally. The frequency of the electric field is the same as the frequency of the magnetic field, which is given as 90.0 kHz in this case.
To determine the rms strength of the electric field, we need to use the relationship between the electric field and magnetic field strength, known as the wave impedance. The wave impedance is given by the ratio of the electric field strength to the magnetic field strength, and it has a constant value for a given medium. In free space, the wave impedance is approximately 377 ohms.
Using this information, we can calculate the rms strength of the electric field as follows:
Electric field strength = Magnetic field strength x Wave impedance
Electric field strength = B x 377
Electric field strength = 0.707 x B (for a sinusoidal wave)
Here, B is the rms strength of the magnetic field, which is given in the problem statement. Substituting the given value of B, we get:
Electric field strength = 0.707 x 1.0 T
Electric field strength = 0.707 V/m

To know more about electric field visit :

https://brainly.com/question/30544719

#SPJ11

During your car trip from Tampa, Florida to Toronto, Canada, you would expect the altitude of Polaris, also known as the North Star, to increase. This is because Polaris appears higher in the sky as you travel closer to the Earth's North Pole.

The altitude of Polaris is determined by the observer's latitude on Earth. Polaris is located nearly in line with Earth's axis of rotation, and its altitude corresponds to the observer's latitude. In this case, as you travel from Tampa, Florida to Toronto, Canada, you are moving northward, closer to Earth's North Pole. The latitude of Toronto is higher than that of Tampa.

As you move closer to the North Pole, the altitude of Polaris will gradually increase. When you are in Tampa, which is further south, Polaris will appear lower in the sky. However, as you travel to Toronto, which is further north, Polaris will appear higher in the sky.

Learn more about altitude of Polaris  here:

https://brainly.com/question/24801553

#SPJ11

In the context of possible models for the universe, the expansion would not continue forever in a recollapsing universe.

Here correct option is C.

The concept of a recollapsing universe is based on the idea that the gravitational attraction between matter and energy in the universe is strong enough to eventually halt and reverse the expansion. In this model, the expansion of the universe would reach a maximum point and then begin to contract, leading to a "big crunch" where the universe collapses back in on itself.

On the other hand, in a critical universe or an accelerating universe, the expansion would continue indefinitely. In a critical universe, the expansion rate gradually slows down but never stops completely.

An accelerating universe, as suggested by observational evidence in recent years, indicates that the expansion is actually accelerating due to the influence of dark energy, a hypothetical form of energy that permeates space.

Therefore, the correct answer is (c) a recollapsing universe.

Know more about recollapsing universe here

https://brainly.com/question/29895852#

#SPJ11

To signal for help using a convex lens make a makeshift fire or a temporary signal.

With the mirror, reflect sunlight toward any distant observer or passing vessel by aiming the mirror's reflection

Divide the distance between wave crests (15 m) by this relative speed to find the time interval between rocking.

1. To calculate how often wave crests will rock the boat while trolling west, first find the relative speed of the boat to the waves by subtracting the boat's speed (2 m/s) from the wave speed.

Then, divide the distance between wave crests (15 m) by this relative speed to find the time interval between rocking.

2. To signal for help using a convex lens, angle it towards the sun and focus the sunlight to create a bright spot on a surface, like a makeshift fire or a temporary signal.

The description of how I would use the tool to call for help

With the mirror, reflect sunlight toward any distant observer or passing vessel by aiming the mirror's reflection, periodically moving it side-to-side to create a flashing effect, increasing the chances of being noticed.

Read more about mirrors here:

https://brainly.com/question/27841226

#SPJ1

The centerline velocity w(0, t) of a fluid flow can be represented by a Fourier series of the form:

w(0, t) = Σ cn * exp(i * n * π * t / T)

where cn are the Fourier coefficients, n is an integer representing the harmonic number, and T is the period of the flow.

The Fourier coefficients cn can be determined from the measured centerline velocity using a Fourier transform algorithm.

The Fourier transform algorithm converts the time domain signal of the velocity waveform into the frequency domain representation, which consists of the Fourier coefficients.

The Fourier coefficients cn represent the amplitude and phase of the individual harmonics that make up the velocity waveform.

By knowing the Fourier coefficients, we can reconstruct the velocity waveform at any point in time using the Fourier series formula.

The centerline velocity is an essential parameter for characterizing fluid flow behavior.

Measuring the centerline velocity and determining its Fourier coefficients provide valuable information about the flow's frequency content and the amplitudes of the individual harmonics.

To know more about  centerline velocity refer here

brainly.com/question/30526153#

#SPJ11

The total number of revolutions undergone by the tub during the entire time interval is 23.1 revolutions.

To determine the total number of revolutions, we need to calculate the angular displacement of the tub during the starting phase, the stopping phase, and the constant speed phase.

During the starting phase, the tub goes from rest to its maximum angular speed of 2.2 rev/s. We can use the equation of motion for angular acceleration:

ω = ω₀ + αt

Given that ω₀ = 0 (initial angular speed) and ω = 2.2 rev/s (final angular speed), and t = 6.8 s (time), we can solve for α (angular acceleration). Using this angular acceleration, we can calculate the angular displacement (θ) during the starting phase.

During the stopping phase, the tub decelerates and comes to a stop. The angular displacement during this phase can be calculated using the same equation of motion for angular acceleration, with ω = 0 (final angular speed), ω₀ = 2.2 rev/s (initial angular speed), and t = 14.5 s (time).

Finally, during the constant speed phase, the angular displacement is given by ωt, where ω is the constant angular speed of 2.2 rev/s and t is the time interval between the end of the starting phase and the beginning of the stopping phase.

Adding up the angular displacements from each phase will give us the total angular displacement, which can be converted to the total number of revolutions by dividing it by 2π.

Calculating these values will result in a total of 23.1 revolutions undergone by the tub during the entire time interval.

To learn more about number of revolutions, here

https://brainly.com/question/29104024

#SPJ4

Ms. Sanborn can cut the rectangular magnet in half lengthwise, separating the north and south poles. Then, she can use each half to create a magnet with only one pole.

By doing this, she will have a magnet with only a north pole and another with only a south pole. It is important to note that when cutting the magnet, she should be careful not to demagnetize it or damage it in any way.

It is also important to keep in mind that the strength of the resulting magnets may be weaker than the original rectangular magnet due to the separation process.

In summary, Ms. Sanborn can cut her rectangular magnet in half lengthwise to create a magnet with only a north pole and another with only a south pole, as long as she takes care not to damage the magnet in the process.

This answer is approximately 106 words, but can be expanded upon if needed.

To Learn more about Ms. Sanborn Click this!

brainly.com/question/881572

#SPJ11

Therefore, the pOH of the solution is 9.38. This means that the solution is slightly basic, as a pOH value above 7 indicates a basic solution.

To calculate the pOH of a solution containing 2.4 x 10^-5 M H3O+ at 25°C, we first need to use the equation for pH, which is pH = -log[H+]. However, in this case, we are given the concentration of H3O+, not H+. To convert H3O+ to H+, we can use the equation H3O+ + H2O ↔ H2O + H+.
This means that the concentration of H+ in the solution is also 2.4 x 10^-5 M. Now we can plug this value into the pH equation to find the pH: pH = -log(2.4 x 10^-5) = 4.62.
Since pH + pOH = 14, we can calculate the pOH by subtracting the pH from 14: pOH = 14 - 4.62 = 9.38.
To know more about pOH visit:

https://brainly.com/question/31610670

#SPJ11

the voltage drop across the 202 resistor is 40 V. Hence option C is correct.

According to voltage divider rule

voltage across 20Ω resistor is

V = Vc R2/Rs

V = 120 (20/60) = 40 V

A straightforward circuit known as a voltage divider divides a high voltage into two smaller ones. We can produce an output voltage that is a small fraction of the input voltage using simply two series resistors and an input voltage. One of the most basic electrical circuits is the voltage divider. Learning about voltage dividers would be like learning how to spell cat if learning about Ohm's law was like learning the ABCs.

Hence option C is correct.

To know more about resistor :

https://brainly.com/question/17390255

#SPJ1.

The acceleration due to gravity on the moon is 1/6 that on Earth. A 55 kg astronaut would weigh 91.7 N on Earth and 15.3 N on the moon.

The weight of an object is determined by its mass and the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 m/s^2, while on the moon it is 1/6 of that, or approximately 1.6 m/s^2. To find the weight of the astronaut on the moon, we can use the formula weight = mass x acceleration due to gravity. Thus, on Earth, the astronaut would weigh 55 kg x 9.8 m/s^2 = 539 N.

On the moon, the astronaut would weigh 55 kg x 1.6 m/s^2 = 88 N. However, weight is usually measured in newtons (N), not kilograms (kg). To convert the weight in kilograms to newtons, we can multiply the weight in kg by 9.8 m/s^2 (on Earth) or 1.6 m/s^2 (on the moon). Therefore, the astronaut would weigh 91.7 N on Earth and 15.3 N on the moon.

Learn more about gravity here:

https://brainly.com/question/31321801

#SPJ11

Resource conservation plays a crucial role in benefiting the environment in multiple ways. Therefore, correct answer is d. All of the above.

Resource conservation plays a crucial role in benefiting the environment in multiple ways. Firstly, by conserving resources, such as forests and wetlands, natural habitats can be preserved, promoting biodiversity and protecting endangered species (option a).

Secondly, resource conservation can help reduce water pollution by implementing efficient water management practices, preventing overuse and contamination (option b). Additionally, resource conservation contributes to the reduction of air pollution by promoting energy efficiency, sustainable transportation, and the use of renewable energy sources (option c).

Learn more about resource conservation, here:

https://brainly.com/question/17913006

#SPJ1

The correct answer is C. The ΔG°, also known as the standard free-energy change, is defined as the free-energy change that occurs when the reactants and products are in their standard states at a specified temperature and pressure, usually at 25°C and 1 atm pressure. The standard state of a substance is the pure form of the substance at the specified temperature and pressure.

The concentrations of the reactants and products are not usually specified in the definition of ΔG°. Instead, it is assumed that the concentrations of the reactants and products are at their standard state concentrations, which are usually 1M or 1 mol/L for aqueous solutions. For example, the standard free-energy change of the reaction A + B → C + D at 25°C and 1 atm pressure is defined as the free-energy change that occurs when A, B, C, and D are each at a concentration of 1M.

To know more about The ΔG° click this link -

brainly.com/question/28301494

#SPJ11

Seat belts provide a centripetal force. Centripetal force is the force directed towards the center of a circular path, which keeps an object moving along that path.

In the case of a car turning, the seat belt provides a force directed towards the center of the turn, which is necessary to keep the passenger moving in a circular path along with the car. If a passenger was not wearing a seat belt during a turn, they would continue to move in a straight line, tangential to the curve, due to their inertia.

The seat belt provides the necessary force to keep the passenger moving in a circular path, preventing them from being thrown out of the car.

Learn more about force here:

https://brainly.com/question/30526425

#SPJ11

Answer:

2.5 m/s

Explanation:

Energy is conserved.

Potential energy = Kinetic energy + Rotational energy

mgh = ½ mv² + ½ Iω²

mgh = ½ mv² + ½ I (v/r)²

mgh = ½ v² (m + I/r²)

(0.56 kg) (9.8 m/s²) (0.5 m) = ½ v² [0.56 kg + ½ (2.9×10⁻⁵ kg m²) / (0.0064 m)²]

2.744 Nm = ½ v² (0.56 kg + 0.354 kg)

2.744 Nm = ½ v² (0.914 kg)

v² = 6.00 m²/s²

v = 2.5 m/s

When the sun was younger, its habitable zone was actually closer to the sun than it is today. This is because as the sun ages and grows hotter, its habitable zone shifts outward, away from the sun. This means that any planets that were in the habitable zone when the sun was younger would have been much closer to the sun than planets in the habitable zone today.

The habitable zone is the area around a star where conditions are just right for liquid water to exist on a planet's surface – a key ingredient for the evolution of life as we know it. So, as the sun grew hotter, its habitable zone also grew larger and moved further from the sun. This means that any planets that were in the habitable zone when the sun was younger would have been much closer to the sun than planets in the habitable zone today. So, when the sun was younger, its habitable zone was actually closer to the sun than it is today. This is because as the sun ages and grows hotter, its habitable zone shifts outward, away from the sun.

Learn more about sun at

https://brainly.com/question/31998244

#SPJ11

The given information describes a transverse wave on a slinky, mmary:with vertical distances, frequency, and horizontal distances provided. To determine the amplitude, period, wavelength, and speed of the wave, we can utilize the formulas associated with these wave characteristics. The amplitude is calculated using the vertical distance, the period is the reciprocal of the frequency, the wavelength is the horizontal distance, and the speed of the wave can be found by multiplying the frequency and wavelength.

The amplitude of the wave is determined by the vertical distance from a trough to a crest, which is given as 32 cm. The period of the wave is the reciprocal of the frequency, so it is equal to 1/2.4 Hz. The wavelength is represented by the horizontal distance from a crest to the nearest trough, which is stated as 48 cm. Lastly, the speed of the wave can be calculated by multiplying the frequency and wavelength, giving the product of 2.4 Hz and 48 cm.

In summary, the amplitude of the wave is 32 cm, the period is approximately 0.42 seconds, the wavelength is 48 cm, and the speed of the wave is approximately 115.2 cm/s.

learn more about wavelength here:brainly.com/question/31143857

#SPJ11

Option D is the correct answer. The hot disks observed around young stars provide strong evidence for the solar nebula theory, which is widely accepted as the best explanation for the origin of our own solar system and others like it.

The observation that seems to suggest the solar nebula theory is correct is that young stars are found to have hot disks that surround them. These disks are thought to be the remnants of the protoplanetary disk from which the planets in our own solar system formed. The disks are observed at infrared wavelengths, indicating that they are warm and radiating heat. This observation is consistent with the idea that the solar system formed from a spinning cloud of gas and dust that collapsed under its own gravity, forming a protostar at the center and a surrounding disk. As the protostar continued to accrete material from the disk, planets formed in the disk by accretion and gravitational interactions. This is the solar nebula theory in a nutshell. Therefore, option D is the correct answer. The hot disks observed around young stars provide strong evidence for the solar nebula theory, which is widely accepted as the best explanation for the origin of our own solar system and others like it.

To know more about wavelength visit :

https://brainly.com/question/28466888

#SPJ11

I don't have a housekeeper or live in any particular location. I also don't have the ability to become a superstar or live in any particular neighborhood. However, I can suggest that success and living well come from hard work, determination, and making wise choices.

It's essential to set goals and work towards achieving them, be disciplined in managing finances, and surround oneself with positive influences. As for having a housekeeper, it's a personal choice that some people make to help manage their household. In summary, success and living well come from personal choices and effort, not just from external factors like having a housekeeper or living in a particular neighborhood.

to know more about external factors visit:

https://brainly.com/question/30166614

#SPJ11

The biggest obstacle to life being present in the atmospheres of Jupiter and Saturn is the absence of liquid water in their atmospheres.

While there are potential sources of energy and organic molecules in these atmospheres, without liquid water as a solvent and a medium for chemical reactions, it is unlikely that life could develop and survive in these extreme environments. The other factors listed (high levels of solar radiation, strong vertical wind speeds, and very low temperatures at the tops of the clouds) would certainly pose challenges for any potential life forms, but the lack of liquid water is the most fundamental barrier.

The liquid state of water, which is necessary for life as we know it, depends on a specific range of temperatures. Water would be frozen and unavailable in a liquid state at the extraordinarily low temperatures seen in Jupiter's and Saturn's upper atmospheres.

The growth and survival of life as we know it depends heavily on liquid water. It participates in numerous biological processes and acts as a solvent for biochemical activities. The conditions required for life as we know it on Earth would not exist without liquid water.

To know more about Jupiter, click here;

https://brainly.com/question/1413868

#SPJ11

Answer:

One simple situation where the law of inertia can be observed is when a ball is placed on a flat surface and left undisturbed.

Explanation:

According to the law of inertia, an object at rest will remain at rest unless acted upon by an external force. In this case, the ball will remain stationary until some external force is applied to it. For example, if someone were to give the ball a push, it would begin to move, since the force overcomes the ball's initial state of rest. Similarly, if the surface the ball is on is inclined, the ball will remain stationary until a force, such as gravity, begins to act on it and cause it to roll downhill. This demonstrates the idea that objects at rest will remain at rest until acted upon by an external force, as described by the law of inertia.

The total pressure acting on the submarine is approximately 106,993.6 Pa.

To calculate the total pressure acting on the submarine, we need to consider both the pressure due to the depth of the seawater and the atmospheric pressure.

The pressure due to the depth of the seawater can be calculated using the formula:

Pressure = density × gravity × depth

where density is the density of the seawater, gravity is the acceleration due to gravity, and depth is the depth of the submarine below the seawater.

Given:

Density of seawater = 1020 kg/m³

Depth of submarine below seawater = 40 cm = 0.4 m

Acceleration due to gravity = 9.8 m/s²

Pressure due to the depth of the seawater = 1020 kg/m³ × 9.8 m/s² × 0.4 m = 3993.6 Pa

Next, we need to consider the atmospheric pressure, which is given as 103,000 Pa.

To find the total pressure acting on the submarine, we need to add the pressure due to the depth of the seawater to the atmospheric pressure:

Total pressure = Atmospheric pressure + Pressure due to depth of seawaterTotal pressure = 103,000 Pa + 3,993.6 Pa

Therefore, the total pressure acting on the submarine is approximately 106,993.6 Pa.

For more such questions on pressure visit:

https://brainly.com/question/28012687

#SPJ11

A liter of molten lead and a liter of apple juice have the same volume but not the same mass Particle. No, a liter of molten lead does not have the same volume or mass as a liter of apple juice.

Molten lead is a dense and heavy metal, while apple juice is a liquid made mostly of water with a much lower density. Density is the amount of mass per unit of volume, and since lead is much denser than apple juice, a liter of molten lead will weigh much more and take up less space than a liter of apple juice. In fact, a liter of molten lead will weigh about 11 times more than a liter of apple juice.

A liter is a unit of volume, so one liter of any substance, whether it's molten lead or apple juice, will have the same volume. However, mass is a different property, dependent on the density of the substance. Molten lead has a much higher density than apple juice, meaning it has more mass per unit volume.

To know more about Particle visit:

https://brainly.com/question/31598350

#SPJ11

When the person is moving downward and the acceleration is zero, the force exerted by the bungee cord equals the force of gravity acting on the person.

This can be expressed as k(l-l0) = mg, where g is the acceleration due to gravity. Solving for the total length of the bungee cord, we get l = (mg/k) + l0. This means that the total length of the bungee cord at the point where the person's acceleration is zero is equal to the sum of the natural length of the bungee cord and the distance the person has fallen due to gravity, which is given by (mg/k). Therefore, the correct expression for the total length of the bungee cord is l = (mg/k) + l0.
In this bungee jumping scenario, a person of mass m experiences zero acceleration at a certain point during the downward motion. Given the natural length of the bungee cord as l0 and its spring constant as k, we can determine the total length (l) of the stretched bungee cord. At zero acceleration, the downward force of gravity (mg) is equal to the upward force exerted by the stretched cord (kΔl), where Δl is the stretched length (l - l0). Thus, we have mg = k(l - l0). To find the total length l, rearrange the equation: l = (mg/k) + l0.

To know about acceleration :

https://brainly.com/question/2303856

#SPJ11