A rocket designed to place small payloads into orbit is carried to an altitude of 12.0 km above sea level by a converted airliner. When the airliner is flying in a straight line at a constant speed of 850 km/h, the rocket is dropped. After the drop, the airliner maintains the same altitude and speed and continues to fly in a straight line. The rocket falls for a brief time, after which its rocket motor turns on. Once its rocket motor is on, the combined effects of thrust and gravity give the rocket a constant acceleration of magnitude 3.00g directed at an angle of 30.0° above the horizontal. For reasons of safety, the rocket should be at least 1.00 km in front of the airliner when it climbs through the airliner’s altitude. Your job is to determine the minimum time that the rocket must fall before its engine starts. You can ignore air resistance. Your answer should include (i) a diagram showing the flight paths of both the rocket and the airliner, labeled at several points with vectors for their velocities and accelerations; (ii) an x-t graph showing the motions of both the rocket and the airliner; and (iii) a y-t graph showing the motions of both the rocket and the airliner. In the diagram and the graphs, indicate when the rocket is dropped, when the rocket motor turns on, and when the rocket climbs through the altitude of the airliner.

Answer:

Explanation:

Distributive property:

A(B+C)=AB+AC

(4x-2)2

Switch sides.

→ 2(4x-2)

Multiply.

⇒ 2*4x=8x

⇒ 2*2=4

Rewrite the problem down.

⇒ = 8x-4

[tex]\Longrightarrow: \boxed{\sf{8x-4}}[/tex]

I hope this helps you! Let me know if my answer is wrong or not.

Answer: 8x - 4

Explanation:

(4x -2)*2

apply distributive property

2* 4x - 2 * 2

Multiply the monomials = 8x

2*4x - 2*= 8x-2*2

calculate =

8x-4

Answer: 8x - 4

i. The electron density of maganese is 2.44 × 10²⁸ electrons/m³

ii. The current that flows through a cylindrical manganese wire of volume 27 cm3 is 21.11 kA

To solve the question, we need to know what electron density is.

This is the number of free electrons per unit volume of material.

To find electron density, we need to find the atom density which is the number of atoms per unit volume, n.

So, the atom density of manganese is n = Nρ/A where

So, n = Nρ/A

n = 6.022 × 10²³ atoms/mol × 7430 kg/m³/0.05494 kg/mol

n = 44743.46 × 10²³ atoms/mol × kg/m³/0.05494 kg/mol

n = 81440.59 × 10²³ atoms/m³

n = 8.144059 × 10²⁷ atoms/m³

n ≅ 8.14 × 10²⁷ atoms/m³

The electron density of maganese is 2.44 × 10²⁸ electrons/m³

So, the electron density of manganese n' = n" × n where

So, n' = n" × n

= 3 electrons per atom × 8.14 × 10²⁷ atoms/m³

= 24.42 × 10²⁷ electrons/m³

= 2.442 × 10²⁸ electrons/m³

≅ 2.44 × 10²⁸ electrons/m³

So, the electron density of maganese is 2.44 × 10²⁸ electrons/m³

The current that flows through a cylindrical manganese wire of volume 27 cm3 is 21.11 kA

The current flowing through the wire is given by i = n'eV/t where

So, substituting the values of the variables into the equation, we have

i = n'eV/t

i = 2.44 × 10²⁸ electrons/m³ × 1.602 × 10⁻¹⁹ C × 27 × 10⁻⁶ m³/5 s

i = 105.54 × 10³ C/5 s

i = 21.11 × 10³ C/s

i = 21.11 × 10³ A

i = 21.11 kA

So, the current that flows through a cylindrical manganese wire of volume 27 cm3 is 21.11 kA

Learn more about electron density here:

https://brainly.com/question/14950000

Explanation:

13x - 26 + 39 = 0

13x=26-39

13x=-13

x= -1

[tex]13x-26+39=0\\\\\implies 13x +13 = 0\\\\\implies 13x = -13\\\\\implies x = -\dfrac{13}{13}\\\\\implies x = -1[/tex]

Answer:

hey, please open my account and see my question, please help me solve the task, I have to send it to the teacher soon.

Answer:

When waves are generated and they reflect off a fixed end, the reflected waves are completely out of phase. The reflected waves and the incident waves interfere with each other along the path and results in the formation of nodes and anti-nodes. Nodes are points of completely out of phase interference and anti-nodes are points of completely in phase interference.

Answer:

5.057 m/s^2

Explanation:

Force of kinetic friction = .3  = F /normal force

  .3 = F /(50* 9.81)     F of friction = 147.15

Net force =   400 - 147.5  =  252.85  N

F = m * a

252.85 = 50 * a       a = 5.057 m/s^2

The kinetic energy of the charged particle is equal to the work done to bring it from the distance of 1 m. Hence, the total electric force here is 0.025 N. Therefore, the charge on the fixed particle is  approximately + 6.7 µC.

According Coulomb's law the electrostatic force between two charges is given by ,

F =  k q1 q2 /r²

Where q1 and q2 be the charges and r be the distance between them, k be the constant equal to 8 × 10⁹ N m²/C².

Given q1 = + 5  µC

r = 1 m.

the kinetic energy in bringing the charge of  5 µC from 2 m is given 50 mJ.

then F = 0.05 J/2 m = 0.025 N

Then q2 = F r²/ (q1 K)

q2  = 0.025 N / ( + 5  µC × 8 × 10⁹ N m²/C²)

      =  6 µC.

Therefore, option b is the approximate charge of the fixed particle.

Find more on Coulomb's law:

https://brainly.com/question/9261306

#SPJ7

Hi there!

[tex]\Phi _B = \int B \cdot dA[/tex]

φ = Magnetic Flux (Wb or Tm²)
B = Magnetic field strength (T)
A = Area (m²)

This equation includes a dot product, so this can be rewritten as:

[tex]\Phi _B = B A cos\theta[/tex]

In this instance, the field is parallel to the area, so cos(0) = 1.

Calculate the magnetic flux by plugging in the given values.

[tex]\Phi _B = BA = 0.114 * 0.065 = \boxed{0.00741 Wb}[/tex]

Answer:

Forces

Explanation:

1) A Force

2) Balanced

3) Unbalanced

4) Any object moving at a constant speed, Any object in 0 motion, A balanced see-saw (no net torque/forces)

5) Any object accelerating, Someone pushing a box

Answer:

D) Hold the lit candle over a small dish, and then let the melted candle wax that drops into the dish cool and harden.

N:B-- IT MUSTN'T REMAIN IN LIQUID FORM; IT MUST COOL & SOLIDIFY.

Explanation:

Igneous rocks are formed when magma cools and solidifies in the earth's crust.

Hi there!

Recall the following relationship between the electric field and electrical potential:
[tex]E = -\frac{dV}{dx}[/tex]

Begin by taking the derivative of the electric potential function using basic power and constant rules.

Remember:
[tex]\frac{dy}{dx}x^n = nx^{n - 1}[/tex]

[tex]\frac{dy}{dx}(C) = 0[/tex]

Differentiate the function, and take its negative.

[tex]-\frac{dV}{dx} = -(2(1)(x^{1-1}) + 0 )\\\\-\frac{dV}{dx} = -2[/tex]

The magnitude is the absolute value, so:
[tex]|\frac{dV}{dx} = |-2| = \boxed{2 \frac{V}{m}}[/tex]

The correct expression for the maximum speed of the object during its motion is [tex]\frac{FT}{m}[/tex].

The maximum speed of the object is determined using the following formulas;

v(max) = Aω

where;

The maximum speed of the object can also be obtained from the maximum net force on the object,

F = ma

where;

F = m(v/t)

mv = Ft

v = Ft/m

Thus, the correct expression for the maximum speed of the object during its motion is [tex]\frac{FT}{m}[/tex].

Learn more about maximum speed here: https://brainly.com/question/4931057

Answer:

[tex]\frac{FT^{2} }{4\pi ^{2} }[/tex]

Explanation:

I just finished the AP Physics Exam and the other answer got the question wrong.

Snow leopards are solitary... If you ever see a two or more snow leopards together, consider yourself extremely lucky! Fun fact: There is no term for a group of snow leopards because it is so rare to see them in a group!

Your welcome!

As its name suggests, the steam engine operates on the force of water vapor (steam) heated to high pressure. It is a technology that converts thermal energy (heat) to mechanical energy (work).

I believe the answer is 16.

 Have a blessed day!

The pressure of the oil with the given properties flowing in the horizontal pipe at the upper portion of the pipe is 157 kPa.

The pressure in the upper portion of the pipe is calculated by applying Bernoulli's equation,

P₁ + ¹/₂ρv₁² + ρgh₁ = P₂ + ¹/₂ρv₂² + ρgh₂

Given;

Susbtsitute the given parameters and solve the for the pressure in the upper portion of the pipe.

237,000 + ¹/₂(892)(1.84)² + (892)(9.8)(0) = P₂ + ¹/₂(892)(3.61)² + (892)(9.8)(8.63)

238,509.9776 = P₂ + 81,252.325

P₂ = 238,509.9776 - 81,252.325

P₂ = 157,257.65 Pa

P₂ ≅ 157 kPa

Thus, the pressure of the oil with the given properties flowing in the horizontal pipe at the upper portion of the pipe is 157 kPa.

Learn more about pressure in pipes here: https://brainly.com/question/10928609

Answer:

P =  ρ g H       explains the pressure of a uniform column of density ρ

P = ρ H            where ρ is given as a weight density

P = 9800 N/m^3 * .60 m = 5880 (5900) N / m^2

Note N/m^2 = Force / Area      the definition of pressure

Answer:

Transverse wave

Explanation:

I hope this helps you! :)

Answer:

Explanation:

The point P is influenced by two electric fields, that are from Q1 and Q2. Because Q1 is a positive point charge, the E-fields is going to the right and the E-fields from Q2 is going to the left because of negative point charge. So:

[tex]E_{1}=\frac{kQ_{1}}{R_{1}^{2}}[/tex]

[tex]E_{2}=\frac{kQ_{2}}{R_{2}^{2}}[/tex]

Where R1 = 2 + 3 = 5 m, and R2 = 3 m. With k = [tex]k=9\times 10^{9}[/tex] in [tex]Nm^{2}/C^{2}[/tex], we can obtain:

[tex]E_{1}=(9\times 10^{9})\frac{500\times10^{-6}}{25}=180\times 10^{3}[/tex] N/C (+)

[tex]E_{2}=(9\times 10^{9})\frac{100\times 10^{-6}}{9}=100\times 10^{3}[/tex] N/C (-)

So: the Electric Field at P : [tex]E_{P}=E_{1}-E_{2}=(180-100)\times 10^{3}=8\times 10^{4}[/tex] N/C in magnitude

Answer:

B. They reproduce

Explanation:

Both arent made up of one cell, and both arent made up of mutliple cells. Only some unicellular and multicellular organisms are infectious.

Answer:

Your answer would be:
B.) They reproduce.

Unicellular organisms are made up of only one cell that carries out all of the functions needed by the organism, while multicellular organisms use many different cells to function. Multicellular organisms are composed of more than one cell, with groups of cells differentiating to take on specialized functions.

Unicellular organisms are made up of only one cell that carries out all of the functions needed by the organism. Multicellular organisms use many different cells to function.

Unicellular organisms are single-celled.

Multicellular organisms are multi-celled.
However, both reproduce.




Explanation:

Have a great rest of your day
#TheWizzer

Answer:

When fuels burn in combustion reactions, they release useful thermal energy (heat). Combustion reactions are used to heat our homes, power most cars, and to generate a lot of our electricity.

Energy production from the reaction is what drives life and human greed. We stay alive by eating carbon-rich compounds, which are then burned in a spectacularly controlled and efficient manner to provide us with energy. It is the all-important energy term in the combustion equation that has made life on Earth possible

The conscious mind contains all of the thoughts, memories, feelings, and wishes of which we are aware at any given moment. This is the aspect of our mental processing that we can think and talk about rationally. This also includes our memory, which is not always part of consciousness but can be retrieved easily and brought into awareness.

hope it helps...!!!

According to Sigmund Freud, memories that easily surface into everyday thought are a conscious part of the mind.

At any given time, the conscious mind contains all of our thoughts, memories, feelings, and wants.

This is the element of our brain functioning that we can reasonably think about and discuss. This includes our memories, which are not always conscious but can be readily recovered and brought into awareness.

Memories that easily emerge into everyday consciousness, according to Sigmund Freud, are a conscious element of the mind.

Hence, memories that easily surface into everyday thought are a conscious part of the mind.

To learn more about the conscious mind refer:

https://brainly.com/question/4400566

#SPJ2

If an object changes the speed of direction, its velocity also changes. Any change in velocity results in acceleration.

Hope that helps!

Answer:

a) we should play inside our classroom

Explanation:

The force of gravity of the sun on Earth is a large force, and it can be represented by a longer arrow.

The force of gravity of the sun on Earth is determined using the following formula.

F = mg

where;

F = 5.97 x 10²⁴ x  9.8

F = 5.85 x 10²⁵ N

Thus, the force of gravity of the sun on Earth is a large force, and it can be represented by a longer arrow.

Learn more about force of gravity here: https://brainly.com/question/2537310

Hi there!

Recall the following relationship:
[tex]E = -\frac{dV}{dx}[/tex]

E = Electric field strength (V/m)
V = Potential Difference (V)

Take the derivative of the given electric potential equation using the power rule:
[tex]\frac{d}{dx}x^n = nx^{n-1}[/tex]

[tex]-\frac{dV}{dx} = -(3 \cdot 3 \cdot x^2) = -9x^2[/tex]

Evaluate at x = 2:
[tex]E(2) = -9(2^2) = \boxed{-36 \frac{V}{m}}[/tex]

**The magnitude of the field strength would simply be 36 V/m.

Answer:

See below

Explanation:

-4 rev / min^2 * 55 min =  - 220 rev/ min

480 - 220 = 260 rev/min at end

2pi radians /rev * 260 rev/min  = 1633.6 Radians/min

At the end of the music, the angular speed of the C.D. would be (d) 260 rev/minute and 1633.6 rad/minute

To calculate angular speed following information is given in the question:

Hence, option (d) is correct which states that the angular speed is 260 rev/min and 1633.6 radians/min.

To know more about angular speed, refer:

https://brainly.com/question/6860269

#SPJ2

Answer:

Archimedes' principle states that the upward buoyant force that is exerted on a body immersed in a fluid, whether fully or partially, is equal to the weight of the fluid that the body displaces. Archimedes' principle is a law of physics fundamental to fluid mechanics.

Answer:

When a body is immersed fully or partially in a fluid, it experience is an upward force that is equal to the weight of the fluid displaced by it.

Answer:

Explanation:

Assuming there is no friction or other force involved, recall that energy is conserved in a system as long as no external force acts on the system.

Using the data from point C, we can find out that the total energy of the system is 156 because  [tex]E = K+Pe[/tex].

Since at point A the object doesn't move, it has Kinetic energy of 0, because [tex]K=\frac{1}{2} mv^2[/tex], therefore [tex]0=\frac{1}{2} m0^2[/tex]. However at point A it has maximum Potential energy, because [tex]Pe=mgh[/tex].

At point B, we can find the Kinetic energy by using [tex]E = K+Pe[/tex]. Substitute values:

[tex]156=104+K\\52=K[/tex]

At point D, the object has maximum kinetic energy and no potential energy, therefore it's the opposite of point A.