Answer:
1 particle of the gas would occupy a volume of 3.718*10⁻²³L
Explanation:
Hello,
1. The sample has a particle of 6.022×10²²particles
2. Volume of the sample = 22.4L
3. Temperature of the sample = 0°C = (0 +273.15)K = 273.15K
4. Pressure of the sample = 1.0atm
What volume would 1 particle of the gas occupy?
But we remember that 1 mole of any substance = 6.022×10²² molecules or particles or atoms
What would be the number of moles for 1 particule?
1 mole = 6.022×10²² particles
X moles = 1 particle
X = (1 × 1) / 6.022×10²² particles
X = 1.66×10⁻²⁴ moles
Therefore, 1 particle contains 1.66×10⁻²⁴ moles
Since we know our number of moles, we can proceed to use ideal gas equation,
Ideal gas equation holds for all ideal gas and is defined as
PV = nRT
P = pressure of the ideal gas
V = volume the gas occupies
n = number of moles of the gas
R = ideal gas constant = 0.082 L.atm / mol.K
T = temperature of the gas
PV = nRT
Solving for V,
V = nRT/ P
We can now plug in our values into the above
equation.
V = (1.66*10⁻²⁴ × 0.082 × 273.15) / 1
V = 3.718*10⁻²³L
Therefore, 1 particule of the gas would occupy a volume of 3.718*10⁻²³L.
WILL GIVE BRAINLIEST!!!!! will give brainliest!!!! ******According to the reaction in question I above, how many grams of solid copper will theoretically be
produced when 14.4 g of aluminum are reacted with 14.4 g of copper (II) sulfate? Which reactant is the
limiting reactant? Show your work. Be sure to include units!
Answer:
5.73 g Cu
Explanation:
M(CuSO4) = 159.6 g/mol
M(Al) = 27.0 g/mol
M(Cu) = 63.5 g/mol
14.4 g Al * 1 mol/27.0 g = 0.5333 mol Al
14.4 g CuSO4 * 1 mol/159.6 g = 0.0902 mol CuSO4
2 Al + 3CuSO4 -------> 3Cu + Al2(SO4)3
from reaction 2 mol 3 mol
given (0.5333 mol )x 0.0902 mol
needed 0.0601 mol
x= 2*0.0902/3 = 0.0601 mol Al
Al is excess, CuSO4 is a limiting reactant.
2 Al + 3CuSO4 -------> 3Cu + Al2(SO4)3
from reaction 3 mol 3 mol
given 0.0902 mol x mol
x = 0.0902 mol Cu
0.0902 mol Cu * 1 mol/63.5 g Cu = 5.73 g Cu
Predict the order of elution if you were to attempt to separate using column chromatography on silica gel and with a gradient eluent system starting with petroleum ether and slowly increasing MTBE % over time.
Answer:
Follows this order: B=> A => C.
Explanation:
NB: kindly check the attachment for the diagram of compounds A, B and C.
Elution is a very important concept in chromatography separation techniques. It deals with the use of eluent in the removal of an adsobate from an adsorbent. The principle behind Elution is just about how polar the solvent is.
So, in this question Compound B will go with the Elution first because of its polarity. Compound B has lesser polarity as compared to Compounds A and B.
Compound A will then elutes second because of its polarity too as resonance increases its polarity.
Last, compound C elutes because it has the highest polarity which is caused by electronegative atoms.
The solubility of N2 in water at a particular temperature and at a N2 pressure of 1 atm is 6.8 × 10–4 mol L–1. Calculate the concentration of dissolved N2 in water under normal atmospheric conditions where the partial pressure of N2 is 0.78 atm.
Answer:
The correct answer is 5.30 * 10^-4 mol per L.
Explanation:
Based on Henry's law, in a solution solubility of the gas is directly proportional to the pressure, that is, C is directly proportional to P. Here P is the pressure and C is the concentration of the dissolved gases.
Therefore, it can be written as,
C2/C1 = P2/P1
Here, C1 is 6.8 * 10^-4 mol/L, P1 is 1 atm and P2 is 0.78 atm, then the value of C2 obtained by putting the values in the equation,
C2/(6.8*10^-4) = 0.78/1
C2 = 0.78 * 6.8*10^-4
C2 = 5.30 * 10^-4 mol per L.
Hence, the concentration of dissolved nitrogen at 0.78 atm is 5.30*10^-4 mol/L.
Arrange the measurements from least to greatest
Answer: 1.8 micrograms, 1.8 milligrams, 1.8 grams, 1.8 kilograms
Explanation:
what happens when you combine Mg2 and NO3
Answer: they blow up
Explanation: add them together and they will blow up
Answer:
Magnesium nitrate Reactions
Magnesium nitrate has a high affinity towards water. Therefore, heating it results to decompose into magnesium oxide, nitrogen oxides, and oxygen. 2 Mg(NO3)2 → 2 MgO + 4 NO2 + O2.
Round off the following measurement to three significant digits: 29.950g
Answer:
30.0 g.
Explanation:
Hello,
In this case, for us to round the given number off to three significant figures, we firstly realize it has initially five significant figures. Thus, cutting at the third digit, which is the second nine, we will have 29.9 g, nonetheless, as a five is after such nine, we should round the nine to ten, so the result is 30.0 g.
Best regards.
A 25.0 mL solution of quinine was titrated with 1.00 M hydrochloric acid, HCl. It was found that the solution contained 0.125 moles of quinine. What was the pH of the solution after 50.00 mL of the HCl solution were added
Answer:
pH = 9.08
Explanation:
Quinine, C₂₀H₂₄O₂N₂, Q, is a weak base that, in water, has as equilibrium:
Q + H₂O ⇄ QH⁺ + OH⁻
Where pKb is 5.10
Using H-H equation for weak bases:
pOH = pKb + log₁₀ [QH⁺] / [Q]
The reaction of quinine with HCl is:
Q + HCl → QH⁺ + Cl⁻
Initial moles of quinine are 0.125 moles and moles added of HCl are:
0.05000L × (1.00mol / L) = 0.05000moles.
That means after the addition of 50.00mL of the HCl solution, moles of Q and QH⁺ are:
Q = 0.125mol - 0.050mol = 0.075 moles
QH⁺ = 0.050 moles
Replacing in H-H equation:
pOH = 5.10 + log₁₀ [0.050] / [0.075]
pOH = 4.92
As pH = 14 - pOJ
pH = 9.08Propane (C3H8) is widely used in liquid form as a fuel for barbecue grills and camp stoves. For 67.7 g of propane, determine the following.(a) Calculate the moles of compound.mol(b) Calculate the grams of carbon.g
Answer:
A. 1.54 mole.
B. 55.39g of carbon
Explanation:
A. Determination of the number of mole in 67.7g of C3H8.
Mass of C3H8 = 67.7g
Molar mass of C3H8 = (3x12) + (8x1) = 44g/mol
Number of mole of C3H8 =..?
Number of mole = Mass/Molar Mass
Number of mole of C3H8 = 67.7/44
Number of mole of C3H8 = 1.54 mole
B. Determination of the mass of carbon in the compound.
This is illustrated below:
The mass of C in compound can be obtained as follow:
=> 3C/C3H8 x 67. 7
=> 3x12 / 44 x 67.7
=> 36/44 x 67.7
=> 55.39g
Therefore, 55.39g of carbon is present in the compound.
Hot coffee in a mug cools over time and the mug warms up. Which describes the energy in this system? The average kinetic energy of the particles in the mug decreases. The average kinetic energy of the particles in the coffee increases. Thermal energy from the mug is transferred to the coffee. Thermal energy from the coffee is transferred to the mug.
Answer:
d
Explanation:
Answer:
D
Explanation:
Edge 2021
What must happen for an ionic bond to be created between two elements?
Answer:
they must be heated
Explanation:
Compare the conjugate bases of these three acids. Acid 1: hypochlorous acid , HClO Acid 2: phosphoric acid , H3PO4 Acid 3: hydrogen sulfide , HS- What is the formula for the weakest conjugate base ?
Answer:
The weakest conjugate is HClO-.
Explanation:
As a general rule, the stronger the Bronsted-Lowry acid, the weaker its conjugate base, and vice versa.
Acid 1: HClO is a strong acid, hence its conjugate base would be weak
Acid 2: H3PO4 is a weak acid, hence its conjugate base would be strong
Acid 3: hydrogen sulphide is also a moderately weak acid with a moderately strong conjugate base.
In order of increasing strengths:
HClO < H2S < H3PO4
Glycine, C2H5O2N, is important for biological energy. The combustion reaction of glycine is given by the equation 4C2H5O2N(s) + 9O2(g) → 8CO2(g) + 10H2O(l) + 2N2(g) ΔH°rxn = –3857 kJ/mol Given that ΔH°f[CO2(g)] = –393.5 kJ/mol and ΔH°f[H2O(l)] = –285.8 kJ/mol, calculate the enthalpy of formation of glycine.
Answer:
ΔH°f C₂H₅O₂N(s) = -537.2kJ
Explanation:
Based on the reaction:
4 C₂H₅O₂N(s) + 9O₂(g) → 8CO₂(g) + 10H₂O(l) + 2N₂(g)
ΔHrxn = ΔH°f products - ΔH°f reactants.
As:
ΔH°fO₂(g) = 0
ΔH°fCO₂(g) = -393.5kJ/mol
ΔH°fH₂O(l) = -285.8kJ/mol
ΔH°fN₂(g) = 0
The ΔHrxn is:
ΔHrxn = (8×-393.5kJ/mol + 10×-285.8kJ/mol) - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol
-6006kJ/mol - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol
-4×ΔH°fC₂H₅O₂N(s) = 2149kJ/mol
ΔH°fC₂H₅O₂N(s) = 2149kJ/mol / -4
ΔH°f C₂H₅O₂N(s) = -537.2kJThe boiling point of ethanol is 78.40°C. A student conducts an
experiment and finds a boiling point of 75.70°C. How far off
from the accepted value was the student's result?
Error = °C
Answer:
2.7 °C
Explanation:
78.4-75.7=2.7
The student's result is 2.7° C less than the expected result.
We have a student conducting an experiment to find the boiling point of ethanol.
We have to determine how far off from the accepted value is the student's result.
What is Measurement error ?Measurement Error (also called Observational Error) is the difference between a measured quantity and its true value.
According to the question, we have -
True value of the boiling point of ethanol [T] = 78.40°C.
Measured value of the boiling point of ethanol [M] = 75.70°C.
The Error (E) in the measurement will be -
E = T - M
E = 78.40° - 75.70° = 2.7° C
Hence, the student's result is 2.7° C less than the expected result.
To solve more questions on Errors in measurements, visit the link below-
https://brainly.com/question/16199575
#SPJ2
Dry chemical hand warmers utilize the oxidation of iron to form iron oxide according to the following reaction: 4Fe(s)+3O2(g)→2Fe2O3(s) Standard thermodynamic quantities for selected substances at 25 ∘C Reactant or product ΔH∘f(kJ/mol) Fe(s) 0.0 O2(g) 0.0 Fe2O3(s) −824.2 Calculate ΔH∘rxn for this reaction.
Answer:
-1648.4 kJ/mol
Explanation:
Based on Hess's law:
ΔHr = ∑n×ΔH°f(products) - ∑n×ΔH°f(reactants)
In the reaction:
4Fe(s) + 3O₂(g) → 2Fe₂O₃(s)
ΔHr = 2 ΔH°f {Fe₂O₃} - (4ΔH°f {Fe(s)} + 3ΔH°f{O₂(g)}
As:
ΔH°f {Fe₂O₃} = -824.2kJ/mol
ΔH°f {Fe(s)} = 0.0kJ/mol
ΔH°f{O₂(g)} = 0.0kJ/mol.
Thus,
ΔHr = 2 ₓ -824.2kJ/mol =
-1648.4 kJ/molAnswer:
-1648.4 kJ
Explanation:
The product has the only nonzero heat of formation, so it is the only value needed to calculate the enthalpy of this reaction. Normally, you would want to express the enthalpy of a reaction with respect to one mole of a chemical species, whether it is a reactant or product. However, since the balanced chemical equation contains only coefficients greater than 1, you should consider how the enthalpy relates to one mole of each substance according to the coefficients. In other words, − 1648.4 kJ of heat is released when 4 mol of Fe reacts with 3 mol of O2 to produce 2 mol of Fe2O3 .
The chemical equation and thermodynamic data for the melting of tungsten are given above. Based on this information, which of the following provides the best predictions correc whether a sample of pure tungsten will melt at 3723 K?
A. The sample will not melt because T > H/s
B. The sample will not melt because T< H/s
C. The sample will mel because T>
D. The sample will mel because T
Based on the information above provided, the best predictions correct whether a sample of pure tungsten will melt at 3723 K is The sample will mel because T>
TungstenTungsten is a very hard and brittle material. It properties include a very high melting point, a low vapor pressure and the highest hardness and strength of all metals. Tungsten has good corrosion resistance against most acids and alkalis.
Learn more about tungsten:
https://brainly.com/question/11014899
Determine if the following salt is neutral, acidic or basic. If acidic or basic, write the appropriate equilibrium equation for the acid or base that exists when the salt is dissolved in aqueous solution. If neutral, write only NR. LiNO₃
Answer:
It is neutral (NR)
Explanation:
Salts are formed when the ionizable hydrogens in an acid is replaced by metallic or ammonium ions from bases. The reaction is known as a neutralization reaction.
The nature of a salt formed from this reaction depends on the nature of the reacting acid and base.
If the reaction is between a strong acid and strong base, the salt produced is a neutral salt.
If the reaction occurs between a strong acid and a weak base, the salt produced is acidic.
If the reaction occurs between a strong base and a weak acid, the salt produced is a basic salt.
Considering the salt above, LiNO3.
On hydrolysis, addition of water, the following products are obtained:
LiNO3 + H2O ----> LiOH + HNO3
The products obtained, LiOH and HNO3 are a strong base and a strong acid respectively. Therefore, the salt, LiNO3, is a neutral salt.
The salt, LiNO₃ is a neutral, NR salt as it's a salt formed from the reaction of a strong acid and a strong base.
In neutralisation reactions, acids and bases react to form salt and water.
However, the salt formed may be acidic, basic or neutral. This is dependent on the type of acid and base which form the salt.
A strong acid and a strong base react to yield a neutral salt like, LiNO₃.
The equilibrium equation when LiNO₃ is dissolved in aqeous solution is;
LiNO₃ + H2O ==>. LiOH + HNO₃Evidently, LiOH and HNO₃ are an example strong base and acid respectively.
Read more:
https://brainly.com/question/2254059
How many grams of the salt CaF2 (g) are formed when 15.7 mL of 0.612 M KF reacts with an excess of aqueous calcium bicarbonate (Ca(HCO3)2) via a metathesis reaction?
Answer:
[tex]m_{CaF_2}0.375gCaF_2[/tex]
Explanation:
Hello,
In this case, for the studied reaction:
[tex]2KF+Ca(HCO_3)_2\rightarrow CaF_2+2KHCO_3[/tex]
Thus, the first step is to compute the reacting moles of potassium fluoride by using its volume and molarity:
[tex]n_{KF}=0.0157L*0.612\frac{mol}{L} =9.61x10^{-3}molKF[/tex]
Then, we apply the 2:1 molar ratio between potassium fluoride and calcium fluoride to compute the produced moles of calcium fluoride:
[tex]n_{CaF_2}=9.61x10^{-3}molKF*\frac{1molCaF_2}{2molKF} =4.80x10^{-3}molCaF_2[/tex]
Finally, by using the molar mass of calcium fluoride (78.07 g/mol) we can compute its produced grams:
[tex]m_{CaF_2}=4.80x10^{-3}molCaF_2*\frac{78.07gCaF_2}{1molCaF_2} \\\\m_{CaF_2}0.375gCaF_2[/tex]
Best regards.
Which best explains how heat plays a role in the movement of materials within Earth's interior?
Answer:
Hot material near the core is less dense and rises, when it cools, it becomes more dense and sinks.
Explanation:
This best explains how heat plays a role in the movement of materials within Earth's interior because it's how convection works. Convection is the circular motion that happens when warmer air or liquid which has faster moving molecules, making it less dense rises, while the cooler air or liquid drops down. Convection currents within the earth move layers of magma, and convection in the ocean creates currents.
Earth’s interior is like a closed chamber, hot material near Earth's surface is more denser and sinks, and when it cools, it becomes less dense and Rises.
What is Convection?Convection is the process of heat transfer by the bulk movement of molecules within fluids such as gases and liquids. The heat transfer take place from solid to no solid material. like air and water.
As we take example of home. In home heat take nearer the roof and cold air will be nearer to the flour. It is because of hot is less denser then the cold air. Hot air will become less denser and move towords upside. Cold air become denser move towards down.
Similarly, on earth. Nearer to earth hot materials are more dense and sinks. When it cools, it become less dense and rises.
To find more about Heat flow, refer the link below:
brainly.com/question/15394654
#SPJ2
If the Moon rises at 7 P.M. on a particular day, then approximately what time will it rise six days later?
Answer:
below
Explanation:
28th 10;24 am
If the Moon rises at 7 P.M. on a particular day, then approximately what time will it rise six days later at 12A.M.
How much time changes between Moon rises from one day to the next?This movement is from the Moon's orbit, which takes 27 days, 7 hours and 43 minutes to go full circle. It causes the Moon to move 12–13 degrees east every day. This shift means Earth has to rotate a little longer to bring the Moon into view, which is why moonrise is about 50 minutes later each day.
So knowing that moonrise is about 50 minutes later each day, we have:
[tex]7+50 minutes = 7:50\\8:40\\9:30\\10:20\\11:10\\12:00 A.M[/tex]
See more about moon at brainly.com/question/13538936
#SPJ2
One of the radioactive isotopes used in chemical and medical research is sulfur-35, which has a half-life of 87 days. How long would it take for 0.25 g to remain of a 1.00 g sample of sulfur-35
Answer:
Time taken = 174 days
Explanation:
Half life is the time take for a subsrtance taken to decay to half of it's origial or initial concentration.
In this probel, the haf life is 87 days, this means that after evry 87 days, the concentration or mass of sulfur-35 decreases by half.
If the starting mass is 1.00g, then we have;
1.00g --> 0.5g (First Half life)
0.5g --> 0.25g (Second half life)
This means that sulphur-335 would undergo two half lives for 0.25g to remain.
Total time taken = Number of half lives * Half life
Time taken = 2 * 87
Time taken = 174 days
Why is tape attracted to my skin? Give explanation
Answer:
Since the tape has extra electrons, it has a negative charge. When you move your finger close to the tape, electrons in your skin are repelled and move away. This makes the skin on your finger tip have a slight positive charge. Since positive and negative attract, the tape moves toward your finger.
Which compound would you expect to be least soluble in water? Explain.
a. CCl4
b. CH3Cl
c. NH3
d. KF
Answer: a.CCl4 aka carbon tetrachloride
Explanation:
ionic compounds and polar molecules can be dissolved in water which is a polar solvent.
choice d (KF) is a salt (an ionic compound) and can be dissolved in water /(K+ and F- ions would be formed in water).
choice c (NH3 or ammonia) is a very polar molecule and thus can be dissolved in water(Hydrogen bonding).
choice b (CH3Cl) is slightly polar because the atoms surrounding the central carbon atom are different(3 H atoms and 1 chlorine atom) and can be dissolved in water(Dipole-dipole interaction).
choice a is nonpolar and cannot be dissolved in water.
what type of bonds do compounds formed from non metal consist of?
Compounds formed from non-metals consist of molecules. The atoms in a molecule are joined together by covalent bonds. These bonds form when atoms share pairs of electrons.
At 25.0 °C the Henry's Law constant for sulfur hexafluoride (SP) gas in water is 2.4x 10 M/atm Calculate the mass in grams of SFo, gas that can be dissolved in S25. ml. of water at 25.0 C and a SF, partial pressure of 1.90 atm Be sure your answer has the correct number of significant digits.
Complete Question
The complete question is shown on the first uploaded image
Answer:
The mass is [tex]m = 0.0349 \ g[/tex]
Explanation:
From the question we are told that
The Henry's Law constant is [tex]k = 2.4 *10^{10} M/atm[/tex]
The volume of water is [tex]V = 525 \ ml = 0.525 \ L[/tex]
The partial pressure is [tex]P = 1.90 \ atm[/tex]
The temperature is [tex]T = 25 ^oC[/tex]
Henry's law is mathematically represented as
[tex]C = P * k[/tex]
Where C is the concentration of sulfur hexafluoride(SP)
substituting value
[tex]C = 1.90 * 2.4*10^{-4}[/tex]
[tex]C = 4.56*10^{-4} \ M[/tex]
The number of moles of SP is mathematically represented as
[tex]n = C * V[/tex]
substituting value
[tex]n = 0.525 * 4.56*10^{-4}[/tex]
[tex]n = 2.39 *10^{-4} \ moles[/tex]
The mass of SP that dissolved is
[tex]m = n * Z[/tex]
Where Z is the molar mass of SP which has a constant value of
[tex]Z = 146 g/mole[/tex]
So
[tex]m = 2.394*10^{-4} * 146[/tex]
[tex]m = 0.0349 \ g[/tex]
What mass of carbon dioxide is produced from the complete combustion of 7.30×10−3 g of methane?
Suppose that a wave has a period of 0.03 seconds what is its frequency be sure to show the steps for your work
Answer:
f = 33.34 Hz
Explanation:
A wave has a period of 0.03 seconds. It is required to find the frequency of a wave. The relation between time period and frequency is inverse. The time period of a wave is given by :
T = 1/f, f = frequency of wave
[tex]f=\dfrac{1}{T}\\\\f=\dfrac{1}{0.03}\\\\f=33.34\ Hz[/tex]
So, the frequency of the wave is 33.34 Hz.
If a solution containing 23.81 g of lead(II) acetate is allowed to react completely with a solution containing 7.410 g of sodium sulfate, how many grams of solid precipitate will be formed g
Answer:
The correct answer is 15.80 grams.
Explanation:
The reaction taking place in the given question,
Pb(CH₃COO)₂ + Na₂SO₄ ⇒ PbSO₄ + 2NaCH₃COO
The number of moles can be calculated by using the formula,
n = weight / molecular mass
Based on the given question, the weight of lead (II) acetate is 23.81 grams and the weight of sodium sulfate is 7.410 grams.
The number of moles of Pb(CH₃COO)₂ is,
n = 23.81 g / 325.29 g/mol = 0.0732 moles
The number of moles of Na₂SO₄ is,
n = 7.410 g / 142.04 g/mol = 0.0521 moles
As one mole of lead (II) acetate needs one mole of sodium sulfate. Therefore, 0.0732 moles of lead (II) acetate needs 0.0732 moles of sodium sulfate.
However, as sodium sulfate is less, that is, 0.0521, therefore, Na₂SO₄ is a limiting reactant.
One mole of sodium sulfate produces one mole of PbSO₄. So, 0.0521 moles of Na₂SO₄ produces 0.0521 moles of PbSO₄.
Now the mass of PbSO₄ is,
mass = moles × molecular mass
mass = 0.0521 × 303.26 g/mol
mass = 15.80 grams.
2 FONS
How does the electric force between two charged particles change if the
distance between them is increased by a factor of 22
A. It increases by a factor of 4.
B. It increases by a factor of 2.
C. It decreases by a factor of 4
O
D. It decreases by a factor of 2.
SUB
Answer:
C. It decreases by a factor of 4
Explanation:
F1 = kq1*q2/r²
F2 = kq1*q2/(2r)² = kq1*q2/(4r²) = kq1*q2/(r²*4) = F1/4
Two samples of the same rainwater are tested using two indicators at an environrnental lab. The first indicator, Methyl Orange, reveals a distinct yellow color when added to the sample. The second indicator, Litmus, turns red when placed in contact with the water sample.
Required:
a. Identify a possible pH value for the rainwater.
b. Explain, in terms of hydronium ions and hydroxide ion concentrations, the pH value of the rainwater.
Answer:
A. The pH value of rainwater is acidic about 4.4
B. The molar concentrations of the Hydronium ions are more than that of the hydroxide ions. That is why the rainwater is acidic with a pH of less than 7
Explanation:
A. Methyl orange is an acid indicator that is used to detect acidic solutions which have pH values that fall within the range of about 4.4 to 7. The distinct yellow colour change that was shown by the methyl orange as it was added to the water shows that the pH value is acidic, with a value above 4.4. (it has to be like this before methyl orange changes to yellow colour)
B. The Hydronium ( H30+) ion concentrations and the hydroxide (OH-) ion concentrations are used to measure the pH values of substances.
We can tell that the Hydronium ( H30+) ion concentrations are more than the hydroxide (OH-) ion concentrations in the sample of rainwater tested. This can be detected from the colour change that both the methyl orange and the litmus paper gave. The indicators showed that the rainwater solution was indeed acidic. Hence, the pH value will be less than 7, but greater than 4.4.
Choose the slope and Y intercept that correspond with the graph
y=3x + 4
Explanation:
Where 3 is the slope and 4 is the y-intercept
