The mass percentage of an element in a compound is the ratio of its mass to the total mass of the compound multiplied by 100. The mas percent of Al in the sample is 36.2%.
What is mass percent ?Mass percent is a common term used to represent the the concentration of chemical samples. It is particularly used for solutions and mixtures where the mass percent of individual components are specified.
The total mass of the compound = 265 g
mass of sulfur = 169.07 g
mass of aluminum = 265 - 169.07 g = 95.93 g
mass percent = mass of Al / total mass of compound × 100
Mass % of Al = 95.93 / 265 × 100 = 36.2 %.
Therefore, the mass percent of aluminum in the compound is 36.2%.
Find more on mass percent;
https://brainly.com/question/5394922
#SPJ1
g in the beta oxidation pathway, when the starting fatty acid contains n carbons, what is the product of the enzyme acyl-coa synthetase? assume the starting saturated fatty acid contains n carbons and n is an even number.
Acyl-CoA synthetase is an enzyme that catalyzes the formation of acyl-CoA from a fatty acid and coenzyme A.
What is synthetase?Synthetase is an enzyme that catalyzes the formation of a covalent bond between two molecules. It is a type of transferase enzyme that works by transferring a specific functional group from a donor molecule to an acceptor molecule, thus creating a new chemical bond. Synthetase enzymes are responsible for the synthesis of various molecules, such as proteins, carbohydrates, nucleotides, lipids, and peptides.
The product of this reaction is an acyl-CoA molecule which contains n-2 carbons (where n is the number of carbons in the starting fatty acid). This acyl-CoA is then ready to enter the beta oxidation pathway, which breaks down the fatty acid into two-carbon molecules.
To learn more about synthetase
https://brainly.com/question/29932822
#SPJ4
Without referring to a data table, rank the following compounds by standard molar entropy.
- N2 (g)
- H2 (g)
- C2H4 (g)
C2H4, N2, and H2 are the right order from most entropy to least entropy.
What is entropy?Entropy is a measureable physical characteristic and a scientific concept that is frequently connected to a state of disorder, randomness, or uncertainty. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or randomness because work is produced by ordered molecular motion. Ice melting is the ideal illustration of entropy. The individual molecules are arranged and fixed as ice. The molecules become disorganized as the ice melts because they are now free to move. The molecules are then liberated to move independently through space as the water is heated to become a gas.
Here,
My justification is that C2H4 will have the most entropy because it has the greatest number of microstates. Then, because something is likely to have more microstates the larger it is, I based N2 and H2 on their weights (which indicate size).
The correct order from most to least entropy is C2H4, N2, and H2.
To know more about entropy,
https://brainly.com/question/1276600
#SPJ4
A coiled coil is a protein structure in which an alpha helix may self-associate into a dimer. One surface of the helix will contain hydrophobic residues that will promote dimerization which the other surface will contain charged or polar residues exposed to the solvent. Which sequence below most likely has the properties of a coiled coil
The sequence that most closely resembles a coiled coil in terms of its qualities is The hydrophobic residues on one surface of the helix will encourage dimerization, while the charged or polar residues on the other surface will be exposed to the solvent.
What do you mean by coil?A coil is one or more turns of current-carrying wire that are used in an electric circuit to create a magnetic field or to provide electrical resistance or inductance. In the latter instance, a coil is also known as a choke coil (see also inductance). A coil, such as a wire wound around an electrical conductor, is essentially what a current coil is. Typically, a soft iron core serves as the conductor while insulated copper wire serves as the coil. It has been noted that the coil begins acting like a magnet when the conductor's coil is carrying current.
What are coils made of?The primary raw materials for coil manufacture have been metal alloys having a track record of patient safety. The main metals used in construction are nitinol, platinum, nickel, iridium, and tungsten, which are typically created as alloys to achieve the best strength.
To know more about Coil visit:
https://brainly.com/question/27961451
#SPJ4
monomer of nucleic acids made up of a 5-carbon sugar, a phosphate group, and a nitrogenous base
Giant macromolecules known as nucleic acids are composed of nucleotide monomers. Pentose sugar, phosphate group, and nitrogenous base are the three elements that make up nucleotides.
Is DNA or RNA made of phosphate sugar and bases?The nucleotides in a DNA sequence are joined by an alternating grey-dark grey sugar-phosphate backbone. The structural structure of nucleic acids, including DNA and RNA, is composed of the sugar-phosphate backbone. This molecule's directionality is determined by this backbone, which is made up of alternating sugar and phosphate groups.
What are the bases and sugars in RNA?However, RNA is often a single-stranded molecule, unlike DNA. Additionally, the name of the molecule is explained by the fact that ribose, rather than deoxyribose, is the sugar present in RNA. The four nitrogenous bases that make up RNA are adenine, cytosine, uracil and guanine.
To learn more about nucleic acid visit:
brainly.com/question/11309892
#SPJ4
The complete question is: What are monomer of nucleic acids made up of a 5-carbon sugar, a phosphate group, and a nitrogenous base called?
ercent Yield For the following balanced chemical reaction: 2 Hg O2 -- 2 HgO If you start with 33 grams of Hg and you produce an actual amount of 25 grams HgO in the lab what is the percent yield
The Percent Yield for the following balanced chemical reaction 75.76%.
What exactly is percent yield?Percent yield in chemistry is the percentage of the product's weight to its theoretical yield. In order to quantify the outcome in percent, we divide the experimental yield by the theoretical yield and multiply the result by 100.
Why do we compute percent yield?Because many chemical reactions produce byproducts, not all of the reactants in the equation actually undergo reaction, percent yield is significant. A poor percent yield in product manufacturing would mean that the corporation is wasting resources, including money and reactants.
To know more about Percent Yield visit-
https://brainly.com/question/17042787
#SPJ4
calculate the pressure exerted by 2.50 l of hf gas containing 1.35 moles at 320 k? group of answer choices 1.00 atm 6.25 atm 14.2 atm 8.96 atm
At 320 K, 2.50 L of HF gas containing 1.35 moles exerts a pressure of 14.2 atm. Therefore, choice C is the right one.
An ideal gas is one in which there aren't any intermolecular attractive forces and all atom-to-atom or molecule-to-molecule collisions are entirely elastic. This equation of state connects a gas's volume, pressure, temperature, and mass. Then, the equation is written as PV=nRT where pressure is denoted by P, the number of moles is denoted by n, volume is denoted by V, and temperature is denoted by T.
Given V=2.50 L, T=230 K, and n=1.35 moles. We know that, R=0.0821 L atm/mol K. Then, the pressure of the given HF gas is calculated as follows,
[tex]\begin{aligned}P_{\mathrm{HF}}&=\frac{nRT}{V}\\&=\mathrm{\frac{1.35\;moles\times0.0821 \;L\;atm\;mol^{-1}\;K^{-1}\times 320 \;K}{2.5\;L}}\\&=\mathrm{14.19\;atm}\\&=\mathrm{14.2\;atm}\end{aligned}[/tex]
The required answer is 14. 2 atm.
To know more about ideal law:
https://brainly.com/question/13207402
#SPJ4
Liquid benzene (C6H6) reacts with gaseous oxygen to form carbon dioxide and liquid water Express your answer as a chemical equation. Identify all of the phases in your answer.
Liquid benzene (C6H6) reacts with gaseous oxygen to form carbon dioxide and liquid water the chemical equation is C6H6(l) + O2(g) → CO2(g) + H2O(l)
In this equation, C6H6 is liquid benzene, O2 is gaseous oxygen, CO2 is gaseous carbon dioxide, and H2O is liquid water.A chemical equation is a symbolic representation of a chemical reaction, showing the reactants, products, and their respective chemical formulas. In a chemical equation, the reactants are listed on the left side of the arrow, while the products are listed on the right side of the arrow. The arrow represents the transformation of reactants into products. For example, in the equation 2H2(g) + O2(g) → 2H2O(g), the reactants are 2 molecules of hydrogen gas (H2) and 1 molecule of oxygen gas (O2), and the product is 2 molecules of water vapor (H2O).
Learn more about chemical equation here:
https://brainly.com/question/28294176
#SPJ4
what happens inside an air-filled balloon is squeezed on all sides?responsesthe air molecules remain in the same place.the air molecules remain in the same place.the air molecules move closer together.the air molecules move closer together.the air molecules move farther apart.the air molecules move farther apart.the air molecules move more slowly.the air molecules move more slowly.
The air molecules move closer together. This works on Boyle's law.
A balloon is an instance of Boyle's law in action. The balloon is filled with air, and the pressure of that air thrusts on the rubber, causing the balloon to expand. When one end of the balloon is squeezed, the pressure inside increases, causing the un-squeezed portion of the balloon to expand out. Boyle's Law is a fundamental law of chemistry that describes the behaviour of a gas at a fixed temperature. Robert A. Boyle discovered the law in 1662, which states that at a constant temperature, the volume of a gas is inversely proportional to the pressure exercised by the gas.
Learn more about Boyle's Law here;
https://brainly.com/question/1437490
#SPJ4
when 2.75 dm3 of o2 reacts with an excess of glucose, according to the reaction below, what volume of carbon dioxide will be produced
2C6H12O6(s) + 6O2(g) -> 12CO2(g) + 6H2O(l)
The reaction given is a combustion reaction of glucose. The balanced equation tells us that for every 2 moles of glucose, 6 moles of O2 are consumed and 12 moles of CO2 are produced.
We are given that 2.75 dm3 of O2 is reacting, which we can convert to moles using the ideal gas law PV = nRT where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant and T is temperature.
Given that the temperature is in Kelvin and R = 8.314 J K-1mol-1
n = (PV) / RT = (2.75 dm3 * 1atm) / (8.314 J K-1mol-1 * 298K) = 0.0591 mol O2
Since the number of moles of O2 is 0.0591 mol, the number of moles of CO2 produced will be 12 * 0.0591 mol = 0.709 mol
To find the volume of CO2 produced, we can use the ideal gas law again:
V = nRT/P
V = (0.709 mol * 8.314 J K-1mol-1 * 298K) / 1 atm = 16.27 dm3
So the volume of carbon dioxide produced will be 16.27 dm3.
Learn more about Ideal Gas here: https://brainly.com/question/14934878
#SPJ4
what is the wavelength λ of the photon that has been released in part b?
Delta E=2.05×10−18 {\rm J}
the photon that was released in part b's wavelength Additionally, it has been demonstrated for graphene that emission flux can approach an excitonic convergence threshold of 106 eV.
What is the photon that was released in part b's lambda wavelength?Rate constant = −2.04×10−18 J E=hc, where is the photon's wavelength in meters, 6.6261034 Js is Planck's characteristic, and 3.00108 m/s is the frequency of light in a vacuum relates the photon's energy to its wavelength.
What connection exists between wavelength and energy E?A photon's energy E is equal to hv = hc/, where v is the electromagnetic radiation's frequency and is its wavelength. the forces in Wavelengths are normally specified in micrometres (1 nm = 109 m), while megajoules (1 eV = 1.6 109 J) are commonly used to express quantum physics.
To know more about wavelength visit :
https://brainly.com/question/13533093
#SPJ4
The lattice energy of MgCl2 is the energy change for which one of the following processes?a. Mg(s) + Cl2(g) → MgCl2(s)b. Mg(g) + 2Cl(g) → MgCl2(s)c. Mg2+(s) + 2Cl−(g) → MgCl2(g)d. Mg2+(g) + 2Cl−(g) → MgCl2(s)e. MgCl2(aq) → MgCl2(s)
The lattice energy of MgCl2 is the energy change for Option D Mg2+(g) + 2Cl−(g) → MgCl2(s)e. MgCl2(aq) → MgCl2(s)
The energy necessary to turn one mole of ionic solid into gaseous ionic components is defined as lattice energy. Or, put that another way, it is the energy is released whenever an ionic solid is established from its gaseous ionic constituents. The lattice energy in chemistry is the energy change that occurs during the creation of one molarity of a crystalline ionic compound from its constituent ions, which also are assumed to be in the gaseous form at the start. It is a measurement of the cohesive forces that hold ionic solids together. The highest lattice energy is displayed by NaF. The greater the attraction between ions, the smaller the surface area of the cation. When ions of opposite charge are small, the bond between them is strongest. Hence lattice energy for MgCl2 is given by Mg2+(g) + 2Cl-(g) --> MgCl2(s). So option D is correct.
Learn more about lattice energy here:
https://brainly.com/question/29441166
#SPJ4
what quantity of compound 1 must be provided to prepare 100.00 ml of solution with a concentration equal to ki?
Heat made from compound 1 are kinetically controlled, whereas those made from benzaldehyde are not. The fluid concentration for liposomes that vaporize at 20 mL is 0.1 mm.
What alteration to the experimental setup will produce quantifiable heat differences and Estimate K1?What alteration to the experimental setup can produce quantifiable heat variations and Kapp > K1 Dilute each and every solution. Compound 1 should be present at higher concentrations in both titrations.
Which experimental method is used to assess heat exchange quantitatively?Assessment of Heat Flow
Calorimetry is a method that we can employ to gauge how much heat is generated during a chemical and physical process. The quantity of heat that is transported from or to a substance is measured using calorimetry. As a result, the heat.
To know more about Heat visit :
https://brainly.com/question/9307612
#SPJ4
the reaction is the last step in the commercial production of sulfuric acid. the enthalpy change for this reaction is 227 kj. in designing a sulfuric acid plant, is it necessary to provide for heating or cooling of the reaction mixture? explain.
It is necessary to provide cooling for the reaction mixture to prevent sulfuric acid from boiling. Enthalpy is -227 kJ. Heat is also emitted into the environment, and hence exothermic.
Sulfuric acid plants: what are they?Any facility that produces sulfuric acid through the contact process of burning elemental sulphur, alkylation acid, hydrogen sulphide, organic sulphides and mercaptans, or acid sludge is referred to as a sulfuric acid plant.
How does a facility for sulfuric acid operate?The boiler's flue gas is piped into a catalytic reaction vessel. The catalyst converts extra oxygen from combustion air into SO3 in order to oxidise SO2. A condensing tower receives catalytic converter exhaust gases.
What are sulfuric acid's four applications?The production of fertilisers, pigments, dyes, medicines, explosives, detergents, inorganic salts, and acids, as well as petroleum refining and metallurgical operations, all utilise varied amounts of acid.
Learn more about sulfuric acid here:
brainly.com/question/30039513
#SPJ4
why does the usda recommends limiting foods with added sugars, saturated fat, and high levels of sodium?
Usda recommends limiting foods with added sugars, saturated fat, and high levels of sodium because it disturbs the iodine level in the body.
Saturated fats are one type of fat in the foods we eat and the beverages we drink. Most come from animal products, like dairy, meat, and poultry. To limit the amount of saturated fats you eat, choose lower-fat and lean options of dairy, meat, and poultry — like skim milk, lean beef, and grilled chicken breast without the skin.
Eating too many foods high in saturated fats can be bad for your health. By replacing saturated fats with unsaturated fats, you may lower your risk of getting heart disease.
To know more about saturated fat here
https://brainly.com/question/24186437
#SPJ4
the backbone of the dna molecule consists of what molecules?
Backbone of DNA is made of phosphate and sugar residues
What is Phosphate Backbone?DNA consists of two strands that wind around each other like a twisted ladder. Each strand has a backbone made of alternating sugar (deoxyribose) and phosphate groups. Attached to each sugar is one of four bases--adenine (A), cytosine (C), guanine (G), or thymine (T).A phosphate backbone is the portion of the DNA double helix that provides structural support to the molecule. DNA consists of two strands that wind around each other like a twisted ladder. Each strand has a backbone made of alternating sugar (deoxyribose) and phosphate groups.It consists of 5-carbon deoxyribose sugars and phosphate groups. These sugars are linked together by a phosphodiester bond, between carbon 4 of their chain, and a CH2 group that is attached to a phosphate ion. They are extremely important in the function of DNA.To learn more about Phosphate Backbone refers to:
brainly.com/question/8627667
#SPJ4
what is viscosity? how does viscosity depend on intermolecular forces? what other factors affect viscosity?
The inability of a liquid to flow freely is known as viscosity. When molecules are more strongly attracted to one another, they do not flow around one another as freely, and this causes greater viscosity in substances with stronger IMF.
How do intermolecular forces affect viscosity, and what is it?In terms of flow resistance, a liquid's viscosity is its density. High viscosities are common in liquids with powerful intermolecular forces.
The type of crude oil, temperature, pressure, amount of dissolved gas, and composition all affect viscosity. Reduced viscosity will occur as temperature rises. Therefore, measurements of viscosity are always reported along with the temperature that they were made at.
To know more about viscosity visit:
https://brainly.com/question/12131735
#SPJ4
Listen to the audio and then choose the option that answers the question. What could be added after this audio
The audio simply implies that there are several stops before he reaches his final destination. so, Option A is the correct answer.
Audio is sound that is within the acoustic range of human hearing, and It is the audible portion of the spectrum of sound frequencies, distinct from inaudible sounds heard by certain animals or used in science and medicine.
Uses of Audio in daily life:
Audio defines any sound or noise in a range the human ear can hear. An audio signal is measured in hertz and on a computer is generated using a sound card and is heard through speakers or headphones.
In this case, the audio simply implies that there are several stops before he reaches his final destination.
To know more about Audio:
https://brainly.com/question/17719272
#SPJ4
in a 1:2 methanol-ethyl acetate mixture, what methyl group integration ratio would you expect for the methyl singlets of methanol and ethyl acetate on 1h nmr? group of answer choices
One method that provides distinctive indications for chemicals is 1H NMR.
What is in ethyl acetate?The acetate ester produced when acetic acid plus ethanol react is known as ethyl acetate. It functions as just a polar aprotic solvent, an inhibitor of EC 3.4.19.3 (pyroglutamyl-peptidase I), a metabolite, and a metabolite produced by Saccharomyces cerevisiae. It is a volatile organic chemical, an ethyl ester, and an acetate ester. A technique of separating methyl alcohol from ethyl acetate is characterised by feeding the mixture of the two substances into an extractive distillation tower from which water is introduced as an extracting agent. The water is then utilised to extract the methyl alcohol and ethyl acetate.
What is methanol solution used for?A transparent liquid molecule called methanol is utilised in countless things we use every day, such as fuels, paints, plastics, and cosmetics. Methanol is a growing form of renewable energy that is used in the electrical, transportation, and marine industries.
To know more about Ethyl Acetate visit:
https://brainly.com/question/13386859
#SPJ4
a sample of sulfur hexafluoride gas (sf6) occupies a volume of 7.600 x 10-1 liters at 5.817 x 101 oc. assuming the pressure is constant, what will the final temperature be (in o c) if the volume is increased to 8.150 liters?
Therefore, if the volume of sulphur hexafluoride is increased to 8.150 litres, the final temperature is 0.106 o C.
what is sulfur hexafluoride gas?The inorganic compound Sulphur hexafluoride, sometimes known as sulphur hexafluoride, has the formula SF6. It is a gas that has no colour, no smell, is not combustible, and is not harmful. Six fluorine atoms are joined to a sulphur atom in the middle of the compound SF 6, which has an octahedral structure. It is a molecule with a high valent. An artificial, odourless gas called SF6 is utilised in the energy sector to maintain the security and dependability of networks. Because it is highly stable, non-toxic, inflammable, and electronegative, it won't combine with other substances that would change how it behaves or how effective it is.
Is SF6 bad for the environment?It is a strong greenhouse gas with a great potential to contribute to global warming, and its concentration in the earth's atmosphere is rising quickly. Under electrical stress, SF6 breaks down during its working cycle, creating hazardous metabolites that represent a health risk to working employees in the event of exposure.
PV = nRT
R is a constant, pressure is assumed to be constant, and moles and n are, of course, constants.
Direct variation is now the only option.
final temperature and volume
V = kT
final temp and volume
v = kt
I believe this concept is known as Charles' law.
V/v = T/t
7.600 x 10-1 × 8.150= 5.817 x 101 / t
0.76×8.150=58.17×t
t = 0.106 o C
To know more about Sulfur Hexafluoride Gas visit:
https://brainly.com/question/22642298
#SPJ4
kalsi3o8 what is the total contribution of the three si atoms to the sum of oxidation numbers in k-feldspars
The total contribution of the three Si atoms to the sum of oxidation numbers in K-feldspars is 0.
What is oxidation numbers?The oxidation state, also known as the oxidation number, in chemistry refers to the hypothetical charge that an atom would have if all of its bonds to other atoms were fully ionic. It describes how much an atom has oxidised (lost electrons) in a chemical compound.
This is because Si atoms have an oxidation number of 0 due to their electron configuration. Each atom has the same number of protons (4) as electrons (4), resulting in a neutral charge and an oxidation number of 0.
To learn more about oxidation number
https://brainly.com/question/26414304
#SPJ4
carbon tetrachloride displays a triple point at 249.0 k and a melting point (at 1 atm) of 250.3 k. which state of carbon tetrachloride is more dense, the solid or the liquid? explain.
Chlorine is really the main liquid used in extinguishers, which is why it works so well to put out tiny flames. It doesn't ignite at any temperature and is not flammable.
The usage of carbon tetrachloride extinguishers has been discontinued.Dichromate extinguishers were abandoned in the 1950s because to the chemical's toxicity, which causes the nerves and major organs to be destroyed when exposed to large doses. A fire's heat can also transform CTC into hydrogen cyanide gas, a chemical agent that was occasionally used.
What is the proper way to get rid of carbon tetrachloride?Get in connect with a licensed, professional rubbish disposal company to have this material removed. After combining it in or combining it with an explosive solution, burn the chemical in a thermal crematorium with an intake and scrubber;
To know more about extinguishers visit:
https://brainly.com/question/30026657
#SPJ4
Complete the following reaction.
a. CH3 + Br FeBr3
b. OCH + CH3CI AICI3
c. OH + HNO3 H2SO4
d. CF3 + H2SO4 SO3
This allows the Br- ion to attack the CF3, releasing an SO3 molecule and forming a new bond.
What is reaction?Reaction is the act of responding or reacting to something. It can take the form of an emotional response, a physical response, or a mental response. Reactions can be positive or negative, and are often the result of a stimulus, such as a situation or an event. Reactions can be conscious or unconscious, and can be based on past experiences.
CF3 + H2SO4 --> SO3
Explanation: This reaction occurs via an electrophilic substitution. The H2SO4 molecule acts as an acid catalyst and protonates the CF3 molecule, making it more electrophilic. This allows the Br- ion to attack the CF3, releasing an SO3 molecule and forming a new bond.
To learn more about reaction
https://brainly.com/question/26505550
#SPJ4
which of the following statement(s) are false? question 50 options: smaller drops have smaller curvature and require greater vapor pressure to keep water molecules from evaporating away. larger drops have greater curvature and require greater vapor pressure to keep water molecules from evaporating away. as the drop size increases, the required relative humidity (rh) for equilibrium increases. as the drop size decreases, the required relative humidity (rh) for equilibrium decreases. a
The false statement are the drop size decreases, the required relative humidity for equilibrium decreases and the drop size increases, the required relative humidity for equilibrium increases.
What more strongly affects droplet size?Droplet size decreases with both rising fluid temperature and pressure. Droplet size is reduced by both increased viscosity and surface tension. By taking into account these variables, you may adjust the droplet sizes to best meet the demands of each situation.
What is the relative humidity at equilibrium?The relative humidity of the atmosphere at a specific temperature when a material neither absorbs nor loses moisture is known as equilibrium relative humidity (ERH). Hygroscopic materials enter the ERH by collecting or releasing moisture at a specific relative humidity of the surrounding air.
Learn more about relative humidity here:
brainly.com/question/14081116
#SPJ4
When adding acid to base the phenolphthalein indicator changes Colour from Colourless to pink at the end of titration?
Because it is colorless by nature, phenolphthalein functions differently from litmus paper. In an alkaline solution or base, it also turns pink.
In addition, the substance is colorless in acids but turns pink at pH 8.2 and brilliant purple when exposed to strong bases. The mechanism that results in the compound's color shift is ionization (Phenolphthalein). Additionally, when a molecule loses or gains an electron, ionization takes place, giving the molecule a positive or negative charge.
Additionally, the ionized molecule repels the same charge and attracts the opposite change. Additionally, it has an impact on molecular form. Additionally, the charge affects how it will respond to light.
Normally, the Phenolphthalein solution appears colorless because it allows all hues of light to pass through it. However, as it is exposed to alkaline, it begins to obstruct the blue portion of the light spectrum, turning the light pink. Additionally, more phenolphthalein molecules will transform and result in a deeper color the stronger the alkaline solution.
To know more about phenolphthalein click here
https://brainly.com/question/14804470
#SPJ4
The rate constant of a certain reaction is known to obey the Arrhenius equation, and to have an activation energy =Ea20. 0/kJmol. If the rate constant of this reaction is ×7. 7107·M−1s−1 at 221. 0°C, what will the rate constant be at 253. 0°C?
Round your answer to 2 significant digits
If the rate constant of this reaction is 7. 7107M1s1 at 221. 0°C, it is 11.3 M-1s-1 at 253. 0°C.
To find the rate constant at 253.0°C, we can use the Arrhenius equation: k = A * e^(-Ea / RT).where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.
We know that the activation energy is Ea = 20.0 kJ/mol, and
the rate constant at 221.0°C is k1 = 7.7107 M^-1s^-1. We can use the known values to find the pre-exponential factor
A:k1 = A * e^(-Ea / R * T1) 7.7107 M^-1s^-1
= A * e^(-20.0 * 10^3 J/mol * (1/8.314 J/mol * K) * (494.0 K)).
A = 7.7107 * e^(20.0 * 10^3 J/mol / (8.314 J/mol * K) * (221.0 - 273.15)).
We can now use this value of A to find the rate constant at 253.0°C:
k2 = A * e^(-Ea / R * T2) = A * e^(-20.0 * 10^3 J/mol / (8.314 J/mol * K) * (526.15 K)).
k2 = 7.7107 * e^(20.0 * 10^3 J/mol / (8.314 J/mol * K) * (221.0 - 273.15)) * e^(-20.0 * 10^3 J/mol / (8.314 J/mol * K) * (253.0 - 273.15)).
k2 = 11.3 M^-1s^-1So the rate constant at 253.0°C is 11.3 M^-1s^-1 rounded to 2 significant digits.
Learn more about rate constant here:
https://brainly.com/question/14977272
#SPJ4
What would happen to the pressure of a gas inside is sealed bottle if the bottle was cooled to half its original temperature?
The pressure of a gas inside is sealed bottle if the bottle was cooled to half its original temperature then the pressure would also decrease by half of its original value and the volume remains constant.
What is pressure ?The term pressure is defined as an expression of force exerted on a surface per unit area. If we applied force F on area A , then pressure
P = F / A.
The pressure of a gas inside is sealed bottle if the bottle was cooled to half its original temperature then the pressure would also decrease by half of its original value and the volume remains constant.
Thus, the pressure would also decrease by half of its original value and the volume remains constant.
To learn more about the pressure, follow the link;
https://brainly.com/question/356585
#SPJ1
if the specific gravity of the mixture is 0.781, what are the w/v concentrations of lactic acid, salicylic acid, and trichloroacetic acid in the mixture?
What are the relative w/v concentrations of lactic acid, citric acid, and boric acid if the mixture's specific gravity is 0.781? What are the % weight-to-volume conversions if the mixture's specific gravity is 0.781?
(Density of the solution / Water Density)
density of mixture = (specific gravity of mixed * density of waters) = (0.781 * 1) = 0.781 g/mL density = (mass/volume) specific gravity = 0.781
Lactic acid concentration in the mixture = (mass of latic acid / quantity of mixture) *100 = (4/128.04)100 = 3.12%. Volume of mixture = (mass / density) = (100 /0.781) =128.04 mL.
What level of fluoride ion should be present in drinking water?
Detailed Solution: 1 mg/l
1.50 mg per liter is the proper answer. The World Health Assembly advised that the maximum allowed level of fluoride present in drinking water for a number of nations, including Canada, China, India, Argentina, and the European Union, be 1.5 mg/l. A fluoride level of 1 mg/l is ideal for drinking water.
To know more acid about:
https://brainly.com/question/14072179
SPJ4
The w/v levels of lactic acid, benzoyl peroxide, plus trichloroacetic acid as in combination are 1.56% if the mixture has a specific gravity of 0.781.
What level of fluoride ion should be present in drinking water?1 mg/l 1.50 mg per liter is the proper answer. The World Health Assembly advised that the maximum allowed level of fluoride present in drinking water for a number of nations, including Canada, China, India, Argentina, and the European Union, be 1.5 mg/l. A fluoride level of 1 mg/l is ideal for drinking water.
(Density of solution / Water Density) = Specific Gravity
density of mixture = (specific gravity of mixed * densities of water) = (0.781 * 1) = 0.781 g/mL density = (mass/volume) specific gravity = 0.781
Volume of the mixture = (Mass of Lactic Acid / Volume of the mixture) = (100 /0.781) =128.04 mL w/v Amount of Lactic in the mixture Salicylic acid concentration in the mixture is *100 = (4/128.04)100 = 3.12% w/v = (mass of Salicylic / volume of mixture). Trichloroacetic acid concentration in the combination: *100 =(5/128.04)100 = 3.9% w/v (i.e., (mass of Trichloroacetic acid / volume of mixture) *100 =(2/128.04)100 = 1.56%
To know more acid about:
brainly.com/question/14072179
#SPJ4
Can you explain what the boundaries are (6th grade science)
Answer:
Personal boundaries or the act of setting boundaries is a life skill that has been popularized by self help authors and support groups since the mid 1980s. It is the practice of openly communicating and asserting personal values as way to preserve and protect against having them compromised or violated.
what could be a cause for your observation in the previous question? hint: think about what must happen for a chemical reaction to occur on an atomic level.
The cause of the observation is likely an activation energy barrier. A chemical reaction requires a certain amount of energy, called the activation energy, to occur.
What is reaction?A response or action that is made in reaction to a stimulus is referred to as a reaction. Reactions can be physical, chemical, or psychological. Physical reactions include movements, such as reflexes, and involve the body’s muscles, nerves, and other tissues. Chemical reactions involve the transformation of matter from one form to another and can be used to create new substances or break down existing ones. Psychological reactions involve emotions, thoughts, and behavior, and are often the result of a person’s response to an event or situation. All reactions involve changes in the environment of the individual or group and can involve both positive and negative responses.
If the activation energy barrier is too high, the reaction may not occur or occur at a very slow rate.
To learn more about reaction
https://brainly.com/question/25769000
#SPJ4
1 mol of ethanol C₂H6O is oxidized by potassium permanganate solution which is acidified with sulphuric acid, forming ethanoic acid C₂H₂O₂, the percentage of the actual yield is 60% What is the mass of ethanoic acid which can be actually collected from the oxidation of 2.3 g of ethanol ? [C= 12, H = 1, O=16]
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 2.94g is the mass of ethanoic acid which can be actually collected from the oxidation of 2.3 g of ethanol .
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
C₂H₂O + K[tex]_2[/tex]Cr[tex]_2[/tex]O[tex]_7[/tex] [tex]\rightarrow[/tex] C₂H₂O₂+water
mole of ethanol= 2.3 g/ 46.07
=0.049 moles
mole ratio between ethanol and ethanoic acid is 1:1
mass of ethanoic acid= 0.049×60.05g/mol
=2.94g
Therefore, 2.94g is the mass of ethanoic acid which can be actually collected from the oxidation of 2.3 g of ethanol .
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
