a scientist is testing an unknown metal sample. he burns the sample and measures the spectrum produced. he concludes that the metal is sodium because of the characteristic bright yellow lines he observes. what is the general term for the type of technique he is performing?

KCl has ionic bond, P4 has nonpolar covalent bond, BF3 has polar covalent bond SO2 has polar covalent bond, Br2 has nonpolar covalent, NO2 has polar covalent bond.

Ionic bonds, also known as electrovalent bonds, are a type of linkage created in a chemical molecule by the electrostatic attraction of ions with opposing charges. Whenever the valence (outer portion) electron of one atom are permanently transferred to another atom, a bond of this kind is created.

Ionic bonds are produced among atoms of metals & non-metals in which the metal loses the electron to complete the octet and such non-metal acquires the electron to complete the octet. Covalent bond, when two atoms share electrons to complete their octets.

To know more about ionic bond visit:

https://brainly.com/question/11527546

#SPJ4

Since 32p has first-order kinetics and a half-life of 14.3 days, it will take 62 days for 95.0% of a sample to degrade. The half-life of a chemical reaction is the time interval during which the concentration.

Of a particular reactant reaches 50% of its initial concentration (i.e. the time taken for the reactant concentration to reach half of chemical reaction and its initial value). The sign "t1/2" is used to denote it and is frequently expressed in seconds. Isotopes are two or more atom types that share the same atomic number (number of protons in their nuclei) and position in the periodic table. 0.693/14.3 = 2.303/t *(log(100/5))

t = 61.82 days

t = 62days

Learn more about periodic table here

https://brainly.com/question/11155928

#SPJ4

If a water heater can supply 40 KBTU/h then it will take 35.64 second to heat the water. This is calculated using the specific heat of water and the power concept.

The electrical energy is used totally depends on the total power used by all the electrical devices and the total time they are used. One kilowatt hour is equal to 1000 watts of power used for one hour of time.

time taken= energy required/ power delivered

System is used to define the measurement of a physical quantity. It is termed as the unit. Different types of unit measurement systems used are  the SI unit system, MKS unit system, Imperial unit system, British unit system, etc.

1 BTU = 1055.6 J

Specific heat of water Cw. = 4186 J/Kg.

Time taken = energy required / power

= 100 . Cw. / 1055.6 * 40*

= 100 * 4186 / 1055.6 * 40 .

= 9.9 * hours

= 35.64 sec

To learn more about specific heat please visit:

https://brainly.com/question/27991746

#SPJ4

The white crystalline solid which exhibits a melting point at -320°C and will not conduct electricity is NaOH

Manufacturers can use sodium hydroxide to make soap, rayon, paper, explosive products, dyes, and petroleum products. Other jobs where sodium hydroxide can be used include processing cotton cloth, cleaning and processing metals, oxide plating, electroplating, and electrowinning. Many metal hydroxides such as LiOH, NaOH, KOH, and Ca(OH)2 are bases. Non-metallic hydroxides like hypochlorous acid (HOCl) are acids.

Properties of sodium hydroxide

Learn more about the crystalline solid in

https://brainly.com/question/28274778

#SPJ4

A) and D) correctly describe the procedures used to determine the number of significant digits in a reported quantity.

Up until the first nonzero digit, work your way right from the left. This is correct because the first nonzero digit is considered the most significant digit and all digits to the right of it are considered significant. If there is a decimal point, all digits starting with the first nonzero digit (moving to the right) are significant.. This is correct because when a decimal point is present, it indicates that the digits to the right of it represent fractional parts of the number and are therefore significant.

Learn more about quantity here:

brainly.com/question/18009784

#SPJ4

Which options correctly describe the procedures used to determine the number of significant digits in a reported quantity? Check all that apply: A)Start at the left and move right until you reach the first nonzero digit.

B)Zeros between other nonzero digits are not significant if there Is no decimal point.

C) Start at the right and count all the nonzero digits In the number.

D) AIl digits from the first nonzero digit onward (going to the right) are significant, if there Is a decimal point.

E)If the quantity has no decimal point; zeros to the right of the nonzero number may or may not be significant

sp³ hybridized orbitals form the CH, CO and OH bonds in methanol.

Hybridization is the process by which the energy of individual atom orbitals is redistributed to create new orbitals with equivalent energy. The hybrid orbitals are the new orbitals that emerge during this process.

All C-H bonds in methanol are formed from the overlapping of the carbon atom's hybridized sp³ orbital with the hydrogen atoms 1s orbital.

The C-O bond in methanol is formed from the overlapping of the carbon atom's hybridized sp³ orbital with the oxygen atom's hybridized sp³ orbital.

The O-H bond in methanol is formed from the overlapping of the oxygen atom's hybridized sp³orbital with the hydrogen atoms 1s orbital.

To know more about Bonds, visit:

https://brainly.com/question/10777799

#SPJ4

The pH of the solution can be defined as the negative logarithm of the concentration of hydrogen ions or H+. In the equation form it is, pH = -log[H+]. These are the important equations to formulate when it comes to equilibrium pH problems.

KCN is actually a  basic salt coming from the reaction of a weak acid, HCN, and a strong base, KOH.  We know that HCN is the weak acid, the SCB is CN-. The reaction would be written as:

CN- + H2O ⇔ HCN + OH-

The important data that is the equilibrium constant of acidity of the weak acid is : Ka for HCN is 6.2×10^-10. Then, let's do the ICE(Initial-Change-Equilibrium) analysis.

         CN-    +    H2O    ⇔    HCN +    OH-

I      0.2 m             ∞                   0             0

C      -x                 ∞                   +x        +x

-----------------------------------------------------------

E      0.2-x                               +x         +x

The value x actually denotes the number of moles that CN- reacted. There is no value for H2O because the solution is dilute which means that water is added to the solution such that H2O>>>CN-.

Since the value of OH- is also calculated to be x, then OH-=0.001788 m. Consequently,

pOH = -log(0.001788) = 2.75

Calculation is pH = 14 - pOH = 14 - 2.75

pH = 11.25

Learn more about pH:

brainly.com/question/2288405

#SPJ4

The answer is 39.1 grammes if 9.7 g of AgNO3 reacts with extra BaCl2 in this process.

In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional substances—also known as products. Chemical elements or chemical compounds make up substances. A response is a movement, propensity, or action that is taken in the opposite direction from what is intended. Reactions are made on the spur of the moment, without much thought or consideration of the potential outcome. Response: Saying something in response to another person's action or comment.

In daily life, there are several examples of chemical processes, such as photosynthesis, rust, baking, digesting, combustion, chemicals batteries, fermentation, and cleaning with soap and water. Not only in the chemistry lab, but all over the place, there are chemical reactions going on.

We have:

Na2S weight: 17.8 grammes

NaNO3 was actually created in 31 grammes.

The theoretical yield of NaNO3 that would result from 17.8 grammes of Na2S must now be determined.

We may calculate the number of moles using the molar mass of Na2S, which is 78.04g/mol:

78.04 grams = 1 mol

17.8 grams = x moles

78.04x = 17.8

x = 17.8/78.04

x = 0.23 moles of Na2S in 17.8 grams

Since the molar ratio of Na2S to NaNO3 is 1:2, we will make twice as much NaNO3 as Na2S.

0.23 * 2 = 0.46 moles of NaNO3 will be produced

We may determine the mass using the molar mass of NaNO3, 85g/mol:

85 grams = 1 mol

x grams = 0.46 moles

x = 0.46 * 85

x = 39.1 grams

To know more about Reaction visit:

https://brainly.com/question/29039149

#SPJ4

The reaction 2Fe(s) +3Br2(g) ->2FeBr3 (s) has an enthalpy of -631 kj/mol and has an enthalpy of -269 kj/mol. the enthalpy of evaporation of Br2 (l) which is liquid at 25C is 142.7KJ/mol

The enthalpy of evaporation of a substance is the heat absorbed when one mole of the substance is converted from a liquid at its boiling point to a gas at the same pressure. To calculate the enthalpy of evaporation of Br2, we need to use the enthalpy of formation of FeBr3 and the balanced equation for the reaction.

The enthalpy of formation of a substance is the heat absorbed or released when one mole of the substance is formed from its elements at standard conditions.

ΔHf(FeBr3) = -269 kJ/mol

ΔHrxn = -631 kJ/mol2Fe(s) + 3Br2(g) -> 2FeBr3(s)

ΔHrxn = 2(ΔHf(Fe(s)) + 3(ΔHf(Br2(l)) - ΔHf(FeBr3(s)) -631 = 2(0) + 3(ΔHf(Br2(l)) -(-269)

3(ΔHf(Br2(l)) = -631 + 2(0) + 269

ΔHf(Br2(l)) = -631 + 2(0) + 269 / 3

ΔHf(Br2(l)) = -142.7 kJ/mol

The enthalpy of evaporation of Br2 is -142.7 kJ/mol

Learn more about enthalpy here:

https://brainly.com/question/3393755

#SPJ4

Mass percentage is a term that represents the concentration, basically mass by mass percentage. It tells about the percentage of a component in a whole component. Therefore, in the below given ways we can find the percent composition.

Mass percentage represents the the percentage of each element that is making a particular compound. Mass percentage does not have any unit as numerator and denominator contains the same unit.

Mathematically,

Percentage of mass = (component’s mass ÷ total mass) x 100%

Therefore, in the above given ways we can find the percent composition.

To learn more about mass percentage, here:

https://brainly.com/question/27429978

#SPJ1

This value indicates that NiS is very slightly soluble in water and thus will not readily dissolve in it.

Soluble describes substances that can be dissolved in a liquid. When a substance is soluble, it is able to form a homogenous solution with the liquid, meaning that the substance will spread out evenly throughout the liquid. Common examples of soluble substances include sugar and salt, which can be dissolved in water. Other substances, such as oil, are insoluble and will not dissolve in a liquid.

The Ksp of NiS is equal to the molar solubility of NiS in pure water raised to the power of two. This is because NiS dissociates into two ions in water (Ni2+ and S2-). Therefore, the Ksp of NiS can be calculated as follows:
Ksp = (3.27 x 10-11 M)2 = 1.06 x 10-21
This means that the solubility product constant (Ksp) of NiS is equal to 1.06 x 10-21. This value indicates that NiS is very slightly soluble in water and thus will not readily dissolve in it.

To learn more about soluble
https://brainly.com/question/1593513
#SPJ4

Due to the unpaired electrons, it is paramagnetic. Because it has 3 unpaired electrons (4-152 252 2pt 332 3p 3d), it is paramagnetic. For G2+, all electrons are coupled (132 257 24us$ 752 3p 30).

The presence of a dipole moment magnetic in an unpaired electron causes paramagnetism. According to QED, an electron's magnetic moment results from its orbital motion and spin characteristics, giving it quantum-style angular momentum.

The majority of atoms with partially filled orbitals are paramagnetic due to the existence of unpaired electrons within the material, while there are some outliers like copper. Unpaired electrons have such a magnetic magnetic dipole because of their spin, which makes them behave like small magnets.

To know more about paramagnetic visit:

https://brainly.com/question/29035441

#SPJ4

E°cell for the balanced redox reaction is -0.531 V.A redox reaction can be defined as a chemical reaction in which electrons are transferred between two reactants participating in it.

Calculating E° cells given K either K provided Eo cell can both be done using this equation. The following formula can be utilized if the RT is constant and the temperature is 298 K: Find the empirical formula (K) for the reaction using F o (0.025693V/n) and K is -0.34V.

PbO2 (s) + 4 H+ (aq) + Sn (s) --> Pb2+ (aq) + 2 H2O (l) + Sn2+ (aq) AI Recommended

Using E° cell table, calculate the E° readings using the conventional reduction potentials. Identify E°cell as E°cathode - E°anode in step 4. Step 5: We can use G = -nFE°cell after calculating E° cell and determining the amount of moles of electrons.

To know more about A redox reaction can be defined as a chemical reaction in which electrons are transferred between two reactants participating in it.

To know more about redox reaction visit:

https://brainly.com/question/13293425

#SPJ4

The part of one type of amino acid that makes it different from another type is the side chain (or R group).

A side chain is a group of atoms that are attached to the alpha carbon atom of the amino acid and is composed of either a hydrogen atom, an alkyl group (a carbon atom with several hydrogen atoms attached), an aryl group (a carbon atom with several hydrogen atoms and a benzene ring attached), an acidic group (a carboxyl group or a sulfhydryl group), or a basic group (an amine group, a guanidinium group, or an imidazole group).

Each amino acid has a unique side chain, which is what gives it its unique chemical and physical properties and distinguishes it from other amino acids. The side chain is also what determines the amino acid's behavior in different environments, such as its solubility, reactivity, and charge.

learn more about amino acid:

https://brainly.com/question/28362783

#SPJ4

The part of amino acids that makes them different from one another is R- Group.

Amino acids are organic compounds. Its molecules combine to form proteins and proteins are called the building blocks of life. Every amino acid has a hydrogen atom present in them along with a carboxyl group, an alpha-amino group, and also the R-group.

R -Group makes the side chain. The side chain present in each Amino acid is the only unique feature that differentiates them. The R groups have a variety of sizes, shapes,  charges, and reactivities. Thus, allowing them to be grouped according to the chemical properties of their side chains.

Therefore, the only main factor that makes every amino acid different is the presence of the R-group.

Read more about Amino Acid at:

https://brainly.com/question/28362783

The most basic type of solid crystalline lonic compounds. Ions form the bulk of an ionic composition.

The correct statememnt is A.

Ionic in nature, the covalent connection between the two hydrogen atoms in a water molecule is created when they deposit their positive charges on opposing sides of the oxygen atom, which has a negative charge.

Ionic radius affects how strong an ionic bond is. The ionic lattice can accommodate smaller ions by allowing for closer packing. The electrostatic forces between oppositely charged ions become greater the closer they are to one another, and this increases the strength of the ionic bond.

To know more about lonic compounds visit:

https://brainly.com/question/24095129

#SPJ4

Answer:

A - not possible, B - possible, C- possible

Explanation:

You need to consider the reactivity series table. Check the attachment below.

A. If you see in the table, nickel is way below magnesium, meaning less reactive, and hence will not be able to snatch SO4 away from magnesium because it is not reactive enough so A is wrong.

B. Magnesium is more reactive than aluminium as mag appears right above alum, so yes possible.

C. Pb is lead which is more reactive than hydrogen so C is also possible.

The Vmax of the reaction is much lower with non-competitive inhibitor than reaction without inhibitor or with competitive inhibitor at high substrate concentrations because of noncompetitive inhibitor can only bind to an enzyme with or without a substrate at several places at a particular point in time

The substrate still binds to the enzyme in the presence of noncompetitive inhibitors. In fact, the binding of the substrate and inhibitor to the enzyme is completely unaffected by one another. The enzyme, however, is unable to catalyze the reaction to produce a product when the inhibitor is attached. Noncompetitive inhibition works by lowering the quantity of active enzyme molecules available to carry out a process.

In non-competitive inhibition, a different site on the enzyme is the spot where the inhibitor molecules interact with the substrate molecules rather than the active sites on the enzyme surface. As a result, there are less enzyme molecules available to catalyze the reaction. Thus, V m an x is decreased. Because of this, extra substrate cannot entirely overcome the non-competitive inhibitors. As a result, the reaction's V max decreases.

Learn more about non-competitive inhibitor at https://brainly.com/question/15906288

#SPJ4

Bonds form because favorable interactions between orbitals and the electrons in those orbitals allow the system to become more stable. High ionization energy means low reactivity.

With more shielding electrons in an atom, reactivity diminishes. A negative charge is present in electrons. The outer-shell electrons are thus pushed back by the inner-shell electrons. The nucleus's attraction to the surrounding electrons is reduced by this repulsion.

Because covalent bonds carry less energy than individual atoms would, they are more stable. The diagram shows how the potential energy of the system drops as the atoms first start to interact because the attractive attraction outweighs the repulsive force.

Reactivity often rises as electron affinity does. The idea of electron affinity and the nonmetals' reactivity are closely related.

Learn more about ionization energy here:

brainly.com/question/28385102

#SPJ4

The copper(I) ions in aqueous solution react with NH₃ (aq). The solubility of the CuBr in 0.23 M NH₃  is 57.24 g/L.

The solubility equilibrium of the CuBr  :

CuBr(s)  ⇄ Cu⁺(aq)   +  Br⁻(aq)

Ksp = [Cu⁺] [ Br⁻] = 6.3 × 10⁻⁹

[Cu(NH₃)₂]⁺ , Kf = 6.3 × 10¹⁰

Kf = [Cu(NH₃)₂]⁺ / [Cu⁺] [NH₃]²

    = 6.3 × 10¹⁰

K = [Cu(NH₃)₂]⁺  [Br⁻] / [NH₃]²

   =  ([Cu(NH₃)₂]⁺) / [Cu⁺] [NH₃]² ([Cu⁺] [ Br⁻] )

K = Kf ×Ksp

K = 4 × 10²

CuBr  +  2NH₃  ⇄  [Cu(NH₃)]⁺  +    Br⁻

K =  [Cu(NH₃)]⁺ [  Br⁻] / [NH₃]²

4 × 10² = x × x / ( 0.23 - 2x)²

x = 0.39

The solubility of CuBr = 0.399 × 143.5

                                     = 57.24 g/L

To learn more about solubility here

https://brainly.com/question/15584619

#SPJ4

A gravimetric analysis is one way to find out how much-dissolved solids there are in a 100 cm3 sample of river water.

Generally, One method to determine the mass of dissolved solids in a 100 cm³ sample of river water is through the use of a gravimetric analysis.

This involves first filtering the water sample to remove any suspended solids, then evaporating the remaining liquid to leave behind the dissolved solids.

The remaining solid material can then be weighed, and the mass of the dissolved solids in the original sample can be calculated.

Additionally, chemical analysis can be used to determine the concentration of dissolved solids by using volumetric analysis, by using ion-selective electrodes or by using spectrophotometry.

Read more about  gravimetric analysis

https://brainly.com/question/6178384

#SPJ1

A) Animals break down food molecules to obtain energy. B) The remains of producers are broken down by decomposers. and C) The remains of consumers are broken down by soil decomposers.

Decomposers are organisms that break down dead or decaying organisms, and in doing so, they carry out the natural process of decomposition. Decomposers are a vital part of the food chain and the nutrient cycle. They are usually fungi and bacteria, but may also include other organisms, such as protists and certain animals, like worms and certain insects. Decomposers play an important role in the cycle of matter and energy in an ecosystem. They break down dead and decaying organisms, as well as feces, and in doing so, they release important nutrients back into the soil, which can then be used by other organisms. Decomposers are essential for the health of an ecosystem, as they help to maintain the balance of organisms and resources in an environment.

To learn more about decomposers
https://brainly.com/question/29001646
#SPJ4

1s can only accommodate two electrons. For N, the next two electrons enter the 2s orbital. The 2p orbital will house the final three electrons. A 1s22s22p3 electron configuration will therefore be present in the N.

The shell number (n) is the first symbol used to represent an electron configuration, followed by the kind of orbital and the superscript number of electrons in the orbital. Consider this: The periodic table shows that oxygen has eight electrons.

In other words, we abide by the Aufbau Principle, Electron - electron Concept, and Hund's Rule.

To know more about  electron configuration visit:

https://brainly.com/question/29757010

#SPJ4

1. Place a spoonful of sugar in a bowl. 2. Observe the shape and color of the sugar. 3. Note the texture of the sugar. The process below demonstrates a physical property of sugar.

What is  physical property?

A physical property is a characteristic of a material or substance that can be observed and measured without changing the material's chemical composition. Examples of physical properties include color, shape, density, melting point, boiling point, electrical conductivity, and solubility.

A physical property is a characteristic of matter that can be observed and measured without changing the chemical identity of a substance. Examples of physical properties include color, density, hardness, melting point, boiling point, and thermal conductivity.

To learn about more physical property

https://brainly.com/question/12330204

#SPJ1

The Lewis symbol for Be2+ is Be2+.

Beryllium is a neutral element that means the no. of electron sand no. of protons they are same. It has two valence electrons. Be lost two negative charges. They will lose two electrons. Be having most stable electronic configuration.

Beryllium is a steel gray metal which is quite brittle at a room temperature, and its chemical properties somewhat resemble with aluminum. They do not occur in a free nature. Be are used in many industries like; Ceramic manufacturing, automotive as well as areospace. Be is a group 1 carcinogen. It is a divalent element which occurs naturally only in combination with the other elements to form a mineral.

To know more about symbol here

https://brainly.com/question/13868256

#SPJ4

The mass of the carbon dioxide gas is 26.4 g.

We know that the mass of the carbon dioxide can be gotten from the number of moles of the compound that we have in the compound and we can be able to get it from the ideal gas equation.

Temperature = 437°C + 273

Volume = 35L

Pressure =  1.00atm

Number of moles = ?

Given that;

PV = nRT

n = PV/RT

n =  1.00atm *  35L/0.082 atm LK-1mol-1 * 710

n = 35/58.22

n = 0.60 moles

Mass = Number of moles * Molar mass

= 0.60 moles * 44 g/mol

=26.4 g

Learn more about ideal gas equation:https://brainly.com/question/28837405

#SPJ1

(E) 0.056 g weight of carbon in the sample is the answer that is correct.

Silicon is really a metalloid, a material that falls somewhere between the two categories of metals and non-metals. There is no clear definition of what falls under the category of metalloid, although in general, metalloids exhibit characteristics from both metallic and non-metals.

Given mass percent of silicon = 99.44 %

So, mass percent of carbon = (100-99.44) %

= 0.56 %

Hence, mass of carbon = 0.56 % of 10 g

= (0.56/100)×10 g

= 0.056 g

To know more about Silicon visit :

https://brainly.com/question/28213172

#SPJ4

The Complete Question is :

a 10.0 gram sample of impure silicon is 99.44% silicon by mass and the rest is carbon. The mass of carbon present in the sample is: Select one: OA. 9.944 grams OB. 99.44 grams OC. 0.56 grams O D. 5.6 x 10³ grams O E 0.056 grams

A. The alkali metal family of the periodic table includes sodium, a soft, silvery metal. Additionally, it reacts quickly.

B. Ionic bonds between sodium and chlorine form. Each one takes electrons. An electron can accept sodium.

The other atom's electrons are drawn to the protons of the other two atoms. Chlorine has a stronger attraction for electrons than sodium, as evidenced by the thicker arrow. The electron from the sodium atom's outer energy level is transferred to the chlorine atom's outer energy level during the interactions between the atoms.

To achieve its octet configuration and produce a negatively charged anion, this chlorine atom accepts one electron.

To know more about ionic bonds visit:

https://brainly.com/question/11527546

#SPJ4

The toxin that costs $30 per gallon is the most potent. We can draw the conclusion that the dandelion poison that costs $30 per gallon is the most potent.

Toxin from botulinum. Although scientists have different opinions on the relative toxicity of various compounds, most appear to concur that the anaerobic bacteria-produced botulinum toxin is the most toxic substance ever discovered. At most 1 nanogram per kilogram of its LD50 can kill a human.

In terms of poisoning, chemicals can be broken down into three major categories: biological poisons, or substances derived from plants and animals, pharmaceuticals, and health care goods. The following discussion covers these three categories as well as a fourth one called radiation.

To know more about dandelion poison visit:

https://brainly.com/question/26151134

#SPJ4

After drying, the mass of the contents of the bag equals is X=54g if 45.0 percent sand by mass. 120.0 grams of the mixture is placed in a fine .

mass, the central act of worship of the Roman Catholic Church, which culminates in celebration of the sacrament of the Eucharist. The term mass is derived from the ecclesiastical Latin formula for the dismissal of the congregation .

mass, in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The greater the mass of a body .

To know more about mass visit

https://brainly.com/question/19580556

#SPJ4