A sealed container can hold
6.28 L CO2 at 1.00 atm and 293 K.
How many moles of CO2 fill the
container?

The point at which the perpendicular bisectors of the sides of a triangle intersect is called the circumcenter of the triangle.

What is a circumcenter?

The circumcenter of a triangle is the point where the perpendicular bisectors of the sides of the triangle intersect. It is the center of the circumcircle, which is the circle that passes through all three vertices of the triangle.

The circumcenter is equidistant from all three vertices of the triangle and is always inside the triangle. Additionally, it is the intersection of the medians, altitudes, angle bisectors and perpendicular bisectors of the triangle.

The circumcenter can also be found by other methods. It is the intersection of the medians, which are the line segments that connect each vertex of the triangle to the midpoint of the opposite side.

It is also the intersection of the altitudes, which are the line segments that are perpendicular to the sides of the triangle and pass through the opposite vertex. The circumcenter is also the intersection of the angle bisectors, which are the line segments that bisect the angles of the triangle and pass through the vertex of the triangle.

Hence, the point at which the perpendicular bisectors of the sides of a triangle intersect is called the circumcenter of the triangle.

To learn more about circumcenter from the given link:

https://brainly.com/question/29647651

#SPJ4

The acid rain is the result of pollutants being released into the atmosphere.

What is acid rain ?

Nitric and sulfuric acids, which are included in acid rain and other dry, abrasive particles that fall to the ground, can harm the surfaces of sculptures, buildings, and other man-made structures. Metal is corroded by the acidic particles, which also hasten the aging of stone and paint.

What is pollutants ?

A material that is present in concentrations that could be harmful to creatures (including people, animals, and plants) or go beyond the limits of acceptable environmental quality is referred to as a pollutant. Frequently, the words "term" and "contaminant" are used interchangeably.

Therefore, acid rain is the result of pollutants being released into the atmosphere.

Learn more about acid rain from the given link.

https://brainly.com/question/30278887

#SPJ4

Answer:

Polar and nonpolar

Explanation:

CO2 is a nonpolar molecule meaning it has equal sharing of electrons

SO2 is a polar molecule meaning that the oxygen pulls slightly more giving it a more bent shape as it has a more negative and a more postive side

The stratosphere is the most chemically stratified layer in the atmosphere.

What is the stratosphere?

The stratosphere is the layer of the atmosphere that is chemically stratified, with the lightest molecules riding above heavier molecules. The ozone layer, which contains a high concentration of ozone (O3) molecules, is located in the stratosphere.

The stratosphere is located above the troposphere and extends from about 15 km to about 50 km above the Earth's surface. This layer is characterized by a relatively constant temperature and is mostly composed of nitrogen and oxygen molecules.

The ozone layer protects the Earth from harmful ultraviolet radiation from the sun. Because ozone is lighter than the air below it, it remains in the stratosphere, while the heavier gases in the air below do not reach that high. This chemical stratification is maintained by the balance of ozone production and destruction processes in the stratosphere.

Hence, the stratosphere is the most chemically stratified layer in the atmosphere.

To learn more about the stratosphere from the given link:

https://brainly.com/question/28097222

#SPJ4

The kinetic energy of a 750 kg car moving at 50.0 km h is  72300 joules.

The capacity of an object to perform work is called energy, and like work, energy has a unit called the joule (J). Although energy can take many various forms, kinetic energy is the one that comes to mind when we talk about it. Since it is used to describe moving objects, kinetic energy is frequently conceived of as the energy of motion.

mass of car (m)= 750 kg

speed of car (v)= 50 km/h

= 50 x 5/18

= 13.9 m/s

we know that kinetic energy= 1/2 x m x v²

= 1/2 x 750 x 13.9²

= 72300 joules

so the kinetic energy is 72300 joules.

Learn more about kinetic energy here :-

brainly.com/question/999862

#SPJ4

The kinetic energy of a car with a mass of 1500 kg running at a velocity of 20 m/s to the east is  60000J (Joules).

The kinetic energy of an object is the energy it possesses due to its motion. It is calculated by using the formula KE = 0.5 * m * v^2, where m is the mass of the object in kilograms and v is its velocity in meters per second.

So, for a car with a mass of 1500 kg running with a velocity of 20 m/s to the east, the kinetic energy can be calculated as follows:

KE = 1/2 * 1500 kg * (20 m/s)^2

KE = 60000 J

By plugging these values into the formula, we can find that the car's kinetic energy is 60000 J (Joules). It's worth noting that kinetic energy is a scalar quantity and has no direction, so the velocity's direction (east) does not affect the calculation.

To know more about Kinetic energy click here:

https://brainly.com/question/26472013#

#SPJ4

At standard temperature and pressure (STP), one mole of a gas occupies a volume of 22.4 liters is 0.22 Liters.

To learn more about standard temperature refer:

brainly.com/question/14820864

#SPJ1

The answer is  3.88 g/cm³ for density.

When you know the radius, you may use the formula volume = (4/3) π r3 to calculate the sphere's volume. Then, using the formula mass = volume density, you can calculate the mass by multiplying the volume by the density: mass = volume density. The formula mass = (4/3) π r3 density can also be used.

Given,

Radius of gold sphere is equal to 272 pm or 272 × 10 ⁻¹² m.

=  2.72 10 10 m 10²cm/m.

The diameter of an atom of gold is 2.72 × 10⁻⁸ cm,

volume of sphere = πr³

V(Au) = 4/3 · (2.72·10⁻⁸ cm)³ · 3.14.

The volume of one atom of gold is 8.43·10⁻²³ cm³

Mass of atom of sphere is equal to 3.27·10⁻¹³ ng · 10⁻⁹ g/ng

Gold atom mass is 3.27·10⁻²² g grams,

density of sphere = mass of gold atom ÷ Volume of gold atom

density of sphere = 3.27·10⁻²² g ÷ 8.43·10⁻²³ cm³

One gold atom has a density of 3.88 g/cm³

To learn more about density from given link

https://brainly.com/question/5419850

#SPJ4

Answer:

30

Explanation:

I’m pretty sure it is

The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.

To learn more about mass of chlorine refer :

brainly.com/question/30314303

#SPJ1

The mass of chlorine needed to create the maximum amount of NaCl would be, Chlorine mass =41.56 g Cl x 33.2% = 13.7 g Cl.

To determine the mass of chlorine needed to create the maximum possible amount of NaCl, we must first look at the percent composition of sodium chloride.

Sodium chloride is composed of 58.44% Na and 41.56% Cl. This means that for every 100 grams of sodium chloride, 58.44 grams is sodium and 41.56 grams is chlorine.

Since we have 20.0 g of sodium, we can calculate the amount of chlorine needed to create the maximum amount of sodium chloride.

First, convert 20.0 g of sodium to a percentage: 20.0 g of sodium is 33.2% of 58.44%. Then, multiply 41.56 grams of chlorine by 33.2%: 41.56 g Cl x 33.2% = 13.7 g Cl.

Therefore, the maximum amount of sodium chloride that can be created from 20.0 g of sodium and 13.7 g of chlorine is 34.1 g.

To create this amount of sodium chloride, we need 20.0 g of sodium and 13.7 g of chlorine.

To learn more about mass of chlorine refer :

https://brainly.com/question/28440406

#SPJ1

To calculate the percentage yield of a reaction, you need to know the theoretical yield (the maximum amount of product that can be produced based on the stoichiometry of the reactants) and the actual yield (the amount of product that is actually produced in the reaction).

The balanced equation for the combustion of hydrogen gas (H2) with oxygen gas (O2) to form water vapour (H2O) is:

2H2 + O2 -> 2H2O

From the balanced equation, we can see that for every 2 moles of H2, 1 mole of H2O is produced. To convert 4 grams of H2 to moles, we use the molar mass of H2 which is 2.016 g/mol.

4g / 2.016 g/mol = 1.98 moles

Now we can calculate the theoretical yield of H2O. Since 2 moles of H2O are produced for every 2 moles of H2, the theoretical yield of H2O is:

1.98 moles x (2 moles H2O / 2 moles H2) = 1.98 moles

The molar mass of H2O is 18.02 g/mol, we can convert the theoretical yield of H2O from moles to grams:

1.98 moles x 18.02 g/mol = 35.7 g

To calculate the percentage yield, we divide the actual yield (18 g) by the theoretical yield (35.7 g) and multiply by 100:

(18 g / 35.7 g) x 100 = 50.5 %

Therefore, the percentage yield of the reaction is 50.5%.

Learn more about Percentage Yield here: https://brainly.com/question/29714892

#SPJ4

Answer:

They both contain atom, sand would be a silicon dioxide molecule. Salt contain sodium chloride.

Explanation:

Both beach sands and grains of salt are composed of atoms and molecules, representing the fundamental building blocks of matter.

Beach sands and grains of salt are both composed of countless tiny particles called atoms and molecules. Atoms are the basic units of matter, consisting of a nucleus of protons and neutrons, surrounded by electrons. Molecules are formed when atoms bond together.

In the case of beach sands, they primarily consist of mineral grains like quartz, each composed of silicon and oxygen atoms bonded together in a crystalline structure. Grains of salt, on the other hand, are made up of sodium (Na) and chlorine (Cl) atoms bonded as sodium chloride (NaCl) molecules.

The relationship between beach sands, salt grains, and atoms lies in their shared composition and arrangement of these fundamental particles, highlighting the underlying unity of matter at the atomic and molecular level.

To learn more about beach sands and grains  here

https://brainly.com/question/15592959

#SPJ2

Answer:

Land is considered as an important resource as it provides habitation to a wide variety of flora and fauna. It is also used by human beings for various purposes such as agriculture, forestry, mining, building houses and roads, and setting up industries.

Two species can indirectly compete for the same resource even when they never come in contact with one another if they depend on the same resource but at different times.

An example of indirect competition is for example where two insect feeds on a certain plant during the day and another species feeds on the same plant during the night.

Indirect competition occurs when animals that use the same resource don't necessarily interact with one another, such as cheetahs that are active during the day and leopards that are active at night that shares a watering hole in a grassland savanna.

Learn about an indirect competition at: https://brainly.com/question/9899099

#SPJ1

Answer: Physical properties, but not in its identity

Explanation:

Physical changes only change the substances physical properties, not the substance’s identity

NH3 is polar because it has a trigonal pyramidal molecular geometry and the nitrogen atom has a higher electronegativity than the hydrogen atoms, giving it a partial negative charge and the hydrogen atoms a partial positive charge.

This creates a dipole moment, making NH3 a polar molecule.

On the other hand, PH3 is nonpolar because it has a tetrahedral molecular geometry and the phosphorus and hydrogen atoms all have the same electronegativity, so there is no dipole moment and no net separation of charge. Thus, PH3 is a nonpolar molecule.

The polarity of a molecule depends on its molecular geometry and the electronegativity of its atoms. The polar NH3 has a trigonal pyramidal shape with a more electronegative nitrogen atom, while the nonpolar PH3 has a tetrahedral shape with atoms of the same electronegativity.

To learn more about the polar molecules:

https://brainly.com/question/17118815

#SPJ4

Single-replacement reactions will occur if the reaction below occurs

K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.

This is also referred to as single displacement reaction and it is referred to as a reaction in which one element is substituted for another element in a chemical reaction.

Single-replacement reactions will occur in the reaction below because it follows and obeys this condition which is:

A + BX ⇒  B + AX

K(s) + ZnCl₂(aq) →→→ KCl₂ + Zn.

Here we can deduce that zinc was substituted which is therefore the reason why it was chosen as the correct choice in this scenario.

Read more about Single-replacement reactions here https://brainly.com/question/7959057

#SPJ1

Answer:

Force=Work done÷ distance travelled

Explanation:

To do this, you want to make the Force variable on its own so you divide d on both sides to get F=W/d

Hope this helps.

Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.

Water is a compound because it is made up of two elements: hydrogen and oxygen. Water, on the other hand, is not the same as oxygen or nitrogen. While water is a liquid, oxygen and nitrogen are gases. To be more specific, all quantitative estimates are made for glucose, the most important hexose in human metabolism. Organic compounds are those with a carbon atom backbone, whereas all other compounds are classified as inorganic. Carbohydrate. The word derives from the fact that the majority of compounds in this chemical class are produced from the combination of carbon and water.

learn more about Water  here:

https://brainly.com/question/28465561

#SPJ4

According to the First Law of Thermodynamics ΔU = Q + W in IUPAC convention, it follows that Q = −W for the isothermal expansion or compression of an ideal gas.

In thermodynamics, an isothermal process is one of the types of thermodynamic processes, in which the temperature (T) of a system remains constant, i.e. ΔT = 0. This, in a typical manner, occurs when a system is in direct contact with an outside thermal reservoir, and a change in this system occurs slowly enough to allow the system to be continuously and gradually adjusted to the temperature of the reservoir through heat exchange.

When the vacuum gets expanded in an isothermal expansion, it leads to the free expansion of a gas. In the case of an ideal gas, the rate of free expansion is NIL (0), that implies that the work done is 0. The value of 0 is the result regardless of whether the isothermal expansion process is irreversible or reversible. 

Some of the examples of reversible cases of isothermal process include converting ice from its solid-state to the liquid-state of water, hydrogenation and dehydrogenation in milling a chemical, etc.

Examples for an irreversible condition of an isothermal process include work that is done against the friction, , magnetic hysteresis, Joule’s heating effect, etc.

The relation between Q and W during an isothermal expansion process is: Q = -W

Learn more about isothermal expansion here:

https://brainly.com/question/4674503

#SPJ4

The heat content of a system under constant pressure is expressed as enthalpy (H). Chemists monitor variations in enthalpy of chemical systems when reactants are transformed into products regular basis.

At constant pressure, the heat absorbed or released by a process is the same as the enthalpy change and is denoted by the symbol H. The energy collected and emitted in many chemical processes is in the form of heat. An exothermic reaction is a chemical process that produces heat. An endothermic reaction is a chemical process in which heat is absorbed. Exothermic and endothermic processes collaborate to provide energy. The heat content of a system under constant pressure is expressed as enthalpy (H). Chemists monitor variations in enthalpy of chemical systems when reactants are transformed into products on a regular basis. At constant pressure, the heat absorbed or released by a process is the same as the enthalpy change and is denoted by the symbol H. When a reaction occurs, the components absorb or release energy as heat.

learn more about chemical  here:

https://brainly.com/question/13145357

#SPJ4

The value for k that transforms the function f into g is -3.

What is the meaning of value for k?

Value for k is a term used in mathematics to refer to the number of elements in a set. The value of k depends on the context of the problem. It could be any numerical value, depending on what it is being used for.

Given : g(x) = f(x) + k

Taking two points from the graph (1,0) and (-1, 2)

slope =   [tex]\frac{2-0}{-1-1}[/tex] =  [tex]\frac{2}{-2}[/tex] = -1

The equation will be,

                       y-0 = -1 (x-4)

                          y= -x + 4

                        f(x)= -x + 4

  So,                g(x)= f(x) + k

                    -x + 1= -x + 4 + k

                          k= 1+4

                          k= -3

Therefore, the value for k= -3.

To learn more about value for k from the link

https://brainly.com/question/24379564

#SPJ4

A healthy behavior can be maintained by maintaining healthy relationships with supportive friends and family, keeping good hygiene, having enough sleep, exercising etc.

Maintaining a healthy behavior is very important not just for our emotional and mental health but also for our overall physical as well as social well being too. Our behavior reflects our attitude as well as our beliefs.

A healthy behavior can be maintained by healthy social interaction amongst our peers, supportive friends, family and also in the community as well as institution which we are a part of. One can also maintain healthy behavior by adopting healthy habits like exercising, sleeping on time, keeping good hygiene etc.

To know more about healthy behavior here

https://brainly.com/question/16939543

#SPJ4

The number of molecules present in 10 grams of a substance depends on the molar mass of the substance.

The molar mass is the mass of one mole of a substance (6.022 x 10²³) of its molecules. To determine the number of molecules present in 10 grams, we can use the formula:

Number of moles = mass/molar mass Number of molecules

= Number of moles x Avogadro's number (6.022 x 10²³)

For example, if the substance is water, its molar mass is 18.015 grams per mole, and 10 grams of water would contain:

Number of moles = 10/18.015 = 0.5556 moles

Number of molecules = 0.5556 x 6.022 x 10²³ = 3.33 x 10²²

It's important to note that Avogadro's number, which is the number of atoms, ions, or molecules in one mole of a substance, is a physical constant and is the same for all substances. So, the number of molecules present in 10 grams of a substance can be calculated by dividing the mass of the substance by its molar mass and then multiplying it by Avogadro's number.

Read more about Moles:

https://brainly.com/question/14357742

#SPJ4

When hydrogen bonds develop between the molecules, the boiling point of water rises. Hydrogen bonds are created when the electronegative oxygen atoms of two different water molecules combine.

Has a hydrogen atom that it can attach to in a separate water molecule. The molecules are hence strongly attracted to one another. In order to make a hydrogen bond, two atoms from either the same or a distinct molecule are required. Hydrogen bonds can form in two different ways: Between-molecule H-bonding molecules form hydrogen bonds. Hydrogen bonding is possible when the hydrogen atom in a molecule is attached to a strongly electronegative atom. One hydrogen atom in water is wedged between two oxygen atoms, creating a solid bond with the following water molecule.

Learn more about molecule here

https://brainly.com/question/19556990

#SPJ4

A bond that is formed between an electronegative atom and a hydrogen atom with a positive dipole is called a Hydrogen Bond.

Hydrogen bonding is a special and important type of dipole-dipole attraction between molecules, unlike a covalent bond, to a hydrogen atom. It results from the attractive force existing between a hydrogen atom covalently bonded to a very electronegative atom such as a Nitrogen, Oxygen, or Fluorine atoms or any other very electronegative atom. Hydrogen bond strengths range from 4 kJ(kilojoule) to 50 kJ per mole of hydrogen bonds.

In molecules containing bonds of N-H, O-H or F-H, the large difference in electronegativity between the H atom and the other atoms of N, O or F leads to a highly polar covalent bond (i.e., a bond dipole).

Because of the difference in electronegativities of the atoms, the H atom bears a large partial positive charge and the other electronegative atoms of N, O or F bear a large partial negative charge.

Some examples of molecules or compounds having hydrogen bonding are as follows.

Learn more about Hydrogen Bond here:

https://brainly.com/question/15099999

#SPJ4

Answer:

0. 261

Explanation:

Use ideal gas formula: PV = nRT, meaning that constant R = [tex]0.08206\frac{(L)(atm)}{(K)(mol)}[/tex]

[tex](1 atm)(6.28L) = n(0.08206\frac{(L)(atm)}{(K)(mol)})(293 K) \\n = \frac{(1 atm)(6.28L)}{(0.08206\frac{(L)(atm)}{(K)(mol)})(293 K)} \\n = 0.26119...\\n = 0.261[/tex]

Answer:

phosphorus=38.27%

hydrogen=2.47%

oxygen=59.26%

Answer: simple and complex.

Explanation:These are also called simple sugars. They're found in refined sugars, like the white sugar you see in a sugar bowl. If you have a lollipop, you're eating simple carbs.

Answer: Monomers are small subunits, that when combined, form polymers.

Explanation: I hope this helps!