a service main at the end of a street decreases in diameter from 12 to 4 inches. if the flow rate is 4 ft/s and the pressure at point 1 is 50 psi

Answers

Answer 1

The amount of fluid that moves past a point in area A per unit of time is known as the flow rate.

How do you find average velocity from flow rate?The amount of fluid that moves past a point in area A per unit of time is known as the flow rate. Here, a uniform pipe carrying the shaded fluid cylinder passes point P in time t. The cylinder's capacity is Ad, its average velocity is v=d/t, and its flow rate is Q=Ad/t=Av.The average fluid velocity for laminar flow through a pipe is equal to half of the fluid's greatest velocity at the pipe's center. The Hagen-Poiseuille equation is shown above. Since there is no acceleration in a steady and uniform flow, there is no force acting in the direction of the flow.

To learn more about fluid velocity refer,

https://brainly.com/question/13344039

#SPJ4


Related Questions

a 1.7 m tall weightlifter holds a 780 n barbell above their head. how much work is being done on the bar

Answers

A 1.7 m tall weightlifter holds a 780 n barbell above their head. 1326 J work is being done on the bar .

work done = force * displacement

force = 780 N

displacement  = 1.7 m

work = 780 * 1.7 = 1326 J

1326 J work is being done on the bar

To learn more about work done here :

https://brainly.com/question/13662169

#SPJ4

How does the work required to accelerate a particle from 10 m/s to 20 m/s compare to that required to accelerate it from 20 m/s to 30 m/s ?.

Answers

Answer:

Explanation:

The work is equal to the change in kinetic energy:

A = Ek - Ek₀

Given:

V₁ = 10 m/s

V₂ =  20 m/s

V₃ = 20 m/s

V₄ = 30 m/s

_____________

A₃₄ / A₁₂ - ?

A₁₂ = m·V₂²/2 - m·V₁²/2 = (m/2)·(V₂² - V₁²)

A₃₄ = m·V₄²/2 - m·V₃²/2 = (m/2)·(V₄² - V₃²)

A₃₄ / A₁₂ = (V₄² - V₃²) /  (V₂² - V₁²)

A₃₄ / A₁₂ = (30² - 20²) /  (20² - 10²)

A₃₄ / A₁₂ = (900 - 400) /  (400 - 100) = 500 / 300 ≈ 1.67

The work of A₃₄ is 1.67 times more than the work of A₁₂

two wires have the same diameter and same resistance. if one is made of copper, and the other is of silver, which wire is longer?

Answers

The silver wire will be longer than the copper wire as the silver has the high expandability than the copper and not just that the silver is very good conductor for electricity but we use copper for wires cause of there cheap availability.

what is resistance?

The amount that an object impedes or resists in an electric current is referred to as resistance. Electric current is the flow of electrons. Consider an example of a person attempting to move from one shop to another in a busy market. This condition is eerily similar to an electron attempting to pass through a wire.

Resistance is the property of materials that allows electric current to flow. Resistance unquestionably resists the passage of current. Furthermore, the unit of resistance is ohms, which is symbolised by the Greek capital letter omega. Furthermore, resistance is affected by the voltage across a resistor as well as the current running through it. Resistance is a measure of the resistance to current flow in an electrical circuit.

To learn more about resistance follow the given link: https://brainly.com/question/16014555

#SPJ4

the value of the resistance in a conductor is decided by what factors? group of answer choices cross sectional area material length

Answers

The connection (R=Al) states that the resistance of a conductor depends on its resistivity, length, and cross-sectional area.

The connection (R=Al) states that the resistance of a conductor depends on its resistivity, length, and cross-sectional area. Other physical elements like temperature and others do affect it. Ohm () is its SI unit.The degree to which an object obstructs or resists an electric current is referred to as resistance. The movement of electrons is referred to as electric current. Consider the scenario of a person navigating a busy market and encountering difficulty moving from one shop to another to better understand resistance.

learn momore about resistance here:

https://brainly.com/question/11431009

#SPJ4

a(n) is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.

Answers

A disconnecting means is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.

This is the definition given to disconnecting means by NEC. NEC stands for National Electrical Code. It is a standard to safe installation of electrical wiring and electrical equipment. It is created to provide safety for people from electrical hazards.

A switch is an example of disconnecting means. A disconnecting means isolates the service panel from the source of utility power. The main circuit breaker on a service panel is another form of disconnecting means.

Therefore, a disconnecting means is a device, or group of devices, or other means by which the conductors of a circuit can be disconnected from their source of supply.

To know more about disconnecting means

https://brainly.com/question/21779056

#SPJ4

A satellite revolves around a planet at an altitude equal to the radius of the planet. The force of gravitational interaction between the satellite and the planet is f0. Then the satellite is brought back to the surface of the planet. Find the new force of gravitational interaction f4.

Answers

A Satellite revolves around the plant at altitude equal to R , radius of planet . The relationship between new gravitational force (f₄) and gravitational force f₀ is f = 4 f.

.

Gravity is the force that attracts any two objects that have mass. Gravity is called gravitational force because it always tries to pull mass together and never push it away. In fact, every object, including you, is pulling on every other object throughout the universe! This is called Newton's law of universal gravitation. It is very noticeable in celestial bodies with huge masses such as the Sun, Earth, and Moon. This is because the force is proportional to the mass of the object. It is responsible for the movement of the planets around the sun and the moon around the earth. People also exert forces on each other, but due to their relatively small mass this is not very important . It is noted by G and mathematically ,

Gravitational force= Gm×m /d²

where m₁ and m₂ are masses of two objects and d ----> distance between the centres of two objects and G is gravitational constant.

In question we one body is planet and other will be satellite.

Let us consider

M ----> Mass of plant

m------> mass of satellite

R ---> radius of planet

In first case, when satelite at a distance say altitude is equal to radius of planet (R) and the distance between the centres of two masses is 2R. Gravitational force between them is

(f ) = GMm / (2R)²= GMm/ 4R² ---(1)

where, G---> gravitational constant

In second case, the satalite is on surface of a planet and distance between two masses is R.

New gravitational force between two bodies is

f₄ = GMm/ R²-----(2)

comparing (1) and (2) we get,

f₀ = f₄/4 => f₄ = f₀

Hence, the relationship between new gravitational force (f₄) and and gravitational force (f₀) is f₄= 4f₀.

To learn more about Gravitational force, refer:

https://brainly.com/question/862529

#SPJ4

a spring is stretched 20 cm by a 30.0 n force. determine the work done in stretching the spring from 0 to 40 cm?

Answers

The work done when a spring is stretched from 0 to 40cm is 4J.

What is work done?

Work done is the magnitude of force multiplied by displacement of an object. It is also the amount of energy transferred to an object when work is done on that.

The work done on the spring to stretch to 40cm is,

F = kx

where F is force, k is force constant.

k = F / x = 10 N / 20 * 10^-2 m = 50 N/m

W = 0.5 * k * (x)^2

where W = work done, k = force constant.

W = 0.5 x 50 x (40 x 10^-2)^2 = 4 J.

Therefore, the work done on the spring when it is stretched to 40cm is 4J.

To learn more about work done click on the given link https://brainly.com/question/25573309

#SPJ4

5.1 box is being being dragged to right 32.59 N force accelerating 3.0 m/s ^2 how strong is force of friction acting on the box

Answers

The force of friction acting on the box is 17.29 N.

What is force of friction?

The force of friction is a type of force that tries to stop an object in motion or tries to resist an object from moving.

The magnitude of the force of friction is determined by applying Newton's second law of motion as shown below;

F - Ff = ma

where;

Ff is the force of friction = ?F is the applied force on the box = 32.59 Nm is the mass of the box = 5.1 kga is the acceleration of the box = 3 m/s²

Ff = F - ma

Ff = 32.59 - (5.1 x 3)

Ff = 17.29 N

Learn more about force of friction here: https://brainly.com/question/4618599

#SPJ1

Idil’s momentum is 110 kg-m/sec when she walks at 2 m/sec. What’s her mass?

Answers

Answer:

Explanation:

Given:

p = 110 kg·m/s

V = 2 m/s

___________

M - ?

Momentum

p = M·V

Mass

M = p / V = 110 / 2 = 55 kg

the am radio band in a particular area has a frequency range of 517 khz to 1612 khz. how long is the wavelength of the radiation at the beginning of the range? answer in units of m.

Answers

The wavelength of the radiation at the beginning of the range is 5.8 × 10² -  1.86 × 10² meter.

A wave is a non-stop and repeating disturbance of a medium and a pulse is an unmarried disturbance.

Calculation:-

c=λ⋅f

λ= c/f

 = 3 × 10⁸ /  517 × 1000

 =  5.8 × 10²

λ= c/f

 = 3 × 10⁸ /  1612 × 1000

= 1.86 × 10²

Therefore, wavelength range =  5.8 × 10² -  1.86 × 10² meter.

A wave is a propagating dynamic disturbance of one or greater portions. Waves can be periodic, in which case those quantities oscillate repeatedly about an equilibrium cost at some frequency. wave, propagation of disturbances from place to vicinity in a regular and prepared way. maximum familiar are floor waves that journey on water, but sound, light, and the motion of subatomic particles all showcase wavelike houses.

A wave is a disturbance in a medium that contains strength without an internet motion of particles. it is able to take the form of elastic deformation, a variation of stress, electric or magnetic intensity, electric-powered potential, or temperature.

Learn more about waves here:-https://brainly.com/question/25699025

#SPJ4

A block of gold (density 19300 kg/m3), a block of concrete (density 2000 kg/m3), and a block of ice (density 920 kg/m3) are all submerged in the same fluid where all three blocks have the same volume. Which block experiences the greatest buoyant force?.

Answers

All three experience the same uboyant force.

What is buoyant force?

Upthrust, often known as buoyancy, is an upward force applied by a fluid against the weight of an object that is partially or completely submerged. The weight of the fluid on top causes pressure in a fluid column to rise with depth.

All three objects experience the same buoyant force because their volumes are equal the buoyant force on an object in a liquid depends on the volume of the submerged object, the density of the liquid, and the acceleration caused by gravity but not on the density of the object.

Hence, all will experience the same buoyant force.

To learn more about the buoyant force the link is given below:

https://brainly.com/question/13748426?

#SPJ4

an ideal solenoid has an inductance of 6.8 mh. to generate an emf of 2.6 v, what should the current should change at a rate of? answer in amps/second.

Answers

An ideal solenoid has an inductance of 6.8 mh. to generate an EMF of 2.6 v, The current should change at a rate of 2.62 * [tex]10^{-3}[/tex] A / second

induced EMF in a solenoid = -L * (di/dt)

∈ = -L * (di/dt)

di/dt = - L / ∈

       = - 6.8 * [tex]10^{-3}[/tex] / 2.6

       = - 2.62 * [tex]10^{-3}[/tex] A / second

The current should change at a rate of 2.62 * [tex]10^{-3}[/tex] A / second

To learn more about inductance here :

https://brainly.com/question/15576393

#SPJ4

After careful analysis, an electromagnetic wave is found to have a frequency of 7. 8 x 106 hz. What is the speed of the wave?.

Answers

Answer:

below

Explanation:

Electromagnetic waves travel at the speed of light    3 x 10^8 m/s

In the winter, an
animal's fur provides
Warmth through which
method?

Answers

Answer:

insulation

Explanation:

they use fur to trap a layer of heat next to its skin and reduce heat transfer

think of it like a house, a closed environment/system and it traps warmth inside and it cant get out. or like a microwave, when you open it you can feel the heat releasing.

a new planet has 1/2 density of earth but 3 times the radius of earth. what is the approximate g-field strength of the new planet

Answers

6g is gravitational -field strength of the new planet

The acceleration due to gravity on earth's surface is

g=GM​/R^2

g=GρV/R^2

, G= the gravitational constant,

M  =mass of earth,

R =radius of earth,

ρ=the density and

V = the volume of earth.

V=4/3×π×R^3

Putting this value

g∝ρ/R

g′/g​=R​/2×3R

g′=6g

The gravitational field has direction, much as other electromagnetic fields like the electric and magnetic fields. It is a vector field as a result. The gravitational field strength, which has the unit Newtons per kilogram, is used to measure the gravitational field. This field force has a limitless range and is constantly attracting.

The electromagnetic field, or the electric and magnetic fields for charged particles and magnets, is comparable to the gravitational field. Since electromagnetic field forces are stronger than gravitational field forces, they take precedence over them.

To know more about  gravitational -field strength visit : https://brainly.com/question/18511078

#SPJ4

a 4.0 m radius circular platform accelerates from rest at 10.0 rad/s2. what is the linear displacement of the edge of the circular platform after 2.0 s?

Answers

A 4.0 m radius circular platform accelerates from rest at 10.0 rad/s2. The linear displacement of the edge of the circular platform after 2.0 s will be  80 m .

theta = omega * t + 1/2 * alpha * [tex]t^{2}[/tex]

omega = angular velocity

alpha = angular acceleration

using equation

theta = omega * t + 1/2 * alpha * [tex]t^{2}[/tex]

         = 0 + 1/2 * 10 * 4 = 20 rad

linear displacement = radius * theta

                                 = 4 * 20 = 80 m

A 4.0 m radius circular platform accelerates from rest at 10.0 rad/s2. The linear displacement of the edge of the circular platform after 2.0 s will be  80 m .

To learn more about linear displacement  here :

https://brainly.com/question/27810942

#SPJ4

To generate lightning, a cloud must have a ____ charge in the top half of the cloud and a _____ charge in the bottom half of the cloud.

Answers

To generate lightning, a cloud must have a Positive charge in the top half of the cloud and a Negative charge in the bottom half of the cloud.

A cloud is a collection of ice or water vapour floating in the atmosphere. When water in the sky condenses, clouds are created. We can observe the water vapour thanks to the condensation. Clouds come in a wide variety of forms. The weather and environment of Earth depend heavily on clouds.

A wide range of use cases, including data backup, disaster recovery, email, virtual desktops, software development and testing, big data analytics, and customer-facing web apps, are being used by businesses of every size, type, and sector.

Because the information being accessed is located remotely in the cloud or another virtual environment, cloud computing has earned its moniker. Users who use cloud services from companies can store and then access data and programmes on distant servers.

Learn more about cloud:

https://brainly.com/question/25130975

#SPJ4

a prize wheel is spinning in a vertical circle at 2.0 rad/s when an acceleration is applied to the wheel to increase the velocity to 6.0 rad/s. how long did this acceleration last if the displacement during this time was 5.0 rad.

Answers

The acceleration of wheel will last for 1.25 sec.

What is angular acceleration?

Angular acceleration refers to as change of angular velocity per unit of time. It is usually expressed in radians/sec². The direction of the acceleration vector is perpendicular to the plane in which the rotation occurs. As the angular velocity(ω) increases clockwise, the angular acceleration rate moves away from the observer. If the angular velocity increase is counterclockwise, the angular acceleration vector points in the direction of the viewer. In SI units, angular acceleration is measured in radians per second (rad/s²) and is commonly expressed as alpha (α).

For the given case,

Using equation of motion:

ω₂² = ω₁² + 2αθ

6² = 2² + 2 × α × 5

36  = 4 + 10α

10α = 32

α = 3.2 m/s²

Acceleration:

α = (ω₂ - ω₁)/t

t = (ω₂ - ω₁)/α

t = (6 - 2)/3.2

t = 1.25 sec

To know more about angular acceleration visit:

https://brainly.com/question/1980605

#SPJ4

a 0.90-kg block is suspended from a spring with a spring constant of 320.0 n/m. a 0.030-kg bullet is fired into the block from directly below with a speed of 280.0 m/s and is embedded in the block. find the amplitude of the subsequent motion. you may ignore gravitational potential energy as if the system was horizonta

Answers

The amplitude of subsequent motion is 0.028 m.

Mass of a given block= 0.90 kg  

Spring constant (k) of a spring = 320N/m

Weight of the given block = F = mg = 0.90 × 9.81 = 8.83 N

F/k = x which is the compression of spring (amplitude) and is equal to 8.83/320 = 0.028 m  

When an object is present in a gravitational field, it has or can acquire gravitational potential energy, which is the energy that results from a change in position. Gravitational potential energy is energy that has a connection to gravitational force or gravity. An example of a system possessing gravitational potential energy is water stored in a dam.

You can learn more about gravitational potential energy by visiting the following link;

https://brainly.com/question/19768887

#SPJ4

the apparent brightness of our sun is roughly 1000 watts per square meter. at a distance of 30 times the earth-sun distance, the apparent brightness of our sun would be

Answers

The apparent brightness of our sun would be 1.11 .

                                                                         

The obvious brightness of a star relies upon how a ways away it's far. a celebrity that is two times as far away seems four instances fainter. greater normally, the luminosity, obvious flux, and distance are associated through the equation f = L/four`pi'd2.

Calculation:-

Brightness = 1000 watts /m²

distance = 30 times earth

Therefore, The apparent brightness of our sun would be = 1000/(30)²

                                                                              =  1.11

The obvious Brightness (B) of a supply is inversely proportional to the rectangular of its distance (d): Implications: For a mild source of a given Luminosity, it's going to seem 2²=4 instances brighter.

The luminosity of the mild bulb, and the space from the bulb to the display screen. here the denominator is just the region of a sphere of radius D. All that this method says is that brightness is the luminosity divided by the vicinity that is illuminated.

Learn more about brightness here:-https://brainly.com/question/952635

#SPJ4

when a solid object is completely submerged in ethyl alcohol, its apparent weight is 18.2 n and when completely submerged in water, its apparent weight is 14.8 n. determine the volume of the object. use 790 kg/m3 as the density of the ethyl alcohol and 1000 kg/m3 as the density of water.

Answers

A Solid object is completely submerged in ethyl alcohol and water. Its apparent weight is 18.2 N and 14.8 N respectively. The volume of the object is 1652 cm³

This problem can be solved using the Archimedes principle, that is the upward buoyant force on an object that is immersed in a fluid is equal to the weight of the displaced fluid, or, mathematically:

F = -ρgV

Where:

ρ = fluid density

g = gravitational acceleration = 9.8 m/s²

V = volume of the displaced fluid

In the given problem, let:

F1 = upward buoyant force in ethyl alcohol

F2 = upward buoyant force in water

The apparent weight is equal to the weight - buoyant force.

In ethyl alcohol:

w + F1 = 18.2

w - 790 x gV = 18.2    (Equation 1)

In water:

w + F2 = 14.8

w - 1000 x gV = 14.8    (Equation 2)

Substract equation 2 from equation 1

w - 790 x gV = 18.2

w - 1000 x gV = 14.8  _

210 x gV = 3.4

V = 3.4 / (9.8 x 210) = 0.001652 m³

   = 1652 cm³

Hence, the volume of the object is 1652 cm³

Learn more about Archimedes principle here:

https://brainly.com/question/10709775

#SPJ4

Zoe knows that the food she eats has a lot of empty calories, so she takes supplements. Her parents keep trying to get her to eat more vegetables
and other nutrient-rich foods. But Zoe tells them as long as she is getting nutrients, it does not matter how she gets them. What is the BEST
response to Zoe?
OA. It is better to get the nutrients from food than supplements.
OB. If she feels fine, then she is probably getting enough nutrition.
OC. If she is taking supplements, her diet will not impact her health.
OD. She should take the supplements before she eats her vegetables.

Answers

Answer:

OA.

Explanation:

its better for zoe to get it from vegetables because supplements aren't intended to replace food. They can't replicate all of the nutrients and benefits of whole foods, such as fruits and vegetables.

if the mass of the child and sled is 38 kg , what is the magnitude of the average force you need to apply to stop the sled? use the concepts of impulse and momentum.

Answers

The magnitude of the average force is 101.33N.

Here we have to find the magnitude of the average force.

The given data:

Initial velocity(u) = 1.6m/s

Mass of the child and sled = 38 kg

Time taken = 0.60s

Formula to find the impulse:

Impulse = change in momentum

We have final velocity (v) = 0

Ft = m(v - u)

F = m(v-u)/t

F = -38 × 1.6/ 0.6

  = -101.33N

Therefore we get an average force is 101.33N.

To know more about the force refer to the link given below:

https://brainly.com/question/12785175

#SPJ4

I NEED THIS ASAP PLEASE ILL GIVE POINTS (science)

Answers

The answer is c.Evaporation

Answer:

C) Evaporation

Explanation:

Think of it like eVAPORation

Solve for xxx. Enter the solutions from least to greatest.
Round to two decimal places.
(x + 8)^2 - 7 = 0(x+8)
2
−7=0

Answers

The given equation is (x+8)²-7=0 and is said to be round to two decimal places. The solution is said to be entered from least to the greatest that is -10.65 and -5.35.

The equation with its highest degree as 2 is called a quadratic equation. We get two solutions for it when we solve it.The quadratic equation is given here as (x+8)²-7=0.

Let us solve the above equation,

(x+8)²-7=0

(x+8)²=7

x+8= ±√7

x= -8 ±√7

The two values of x are √7-8, -8 -√7.

√7-8= -5.35

-8 -√7= -10.65

Thus, the solutions from least to the greatest are -10.65 and -5.35.

To know more about the decimal places:

https://brainly.com/question/28011380

#SPJ1

About how much greater is the gravitational force exerted by the moon on the near side of the earth than on the far side?.

Answers

The moon exert 7% more gravitational fore on the near side of the earth than the far side of the earth.

Any two objects in the universe are drawn together by gravitational attraction, regardless of whether their masses are equal or not. Additionally, according to Newton's Universal Law of Gravitation, everything in the universe, including you, is pulled toward everything else. The unit of gravitational force is a Newton, represented by the letter N.

A fundamental interaction in physics that creates mutual attraction between all entities with mass or energy is called gravity (from the Latin gravitas, "weight"). The electromagnetic force, the strong interaction, and the weak interaction are all significantly stronger than gravity, which is by far the weakest of the four fundamental interactions.

Learn more about gravitational force:

brainly.com/question/11575518

#SPJ4

which of the wavelengths most likely corresponds to the wavelength of the most intense line in xenon's emission spectrum?\

Answers

The wavelength that most closely matches the wavelength of the strongest line in the emission spectra of xenon is 492 nm.

The correct option is D.

What emission range does xenon have?

A contained inductively linked plasma discharge running at atmospheric pressure and 350 W is said to have produced pristine xenon, krypton, and neon emission spectra spanning the spectral range of 200 to 900 nm.

What is the function of wavelength?

wavelength: The separation between a wave's peaks or troughs in a series. It is moreover one of the "yardsticks" for radium measurement.

What is the name of wavelength?

The light source is the distance between its two crests or troughs, much like the wavelength of a light wave. It is named that used the Greek letter lambda. The distance between the crest or dip of one wave and the succeeding wave is therefore referred to as the wavelength.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

Complete question is:

Which of the wavelengths most likely corresponds to the wavelength of the most intense line in xenon's emission spectrum?

404 nm.

656 nm.

597 nm.

492 nm.

How long does it take to raise a drawbridge?.

Answers

The drawbridge takes 18.33 mins to rise.

Given,

Let us assume that the total height of the bridge is h units.

The bridge takes 11/2 minutes to raise a height of 6h/20.

From hidden trial method we can say that;

If the drawbridge rise 6h/20 units in 11/2 minutes

Then, drawbridge rises 1 unit in the time = (11/2)/(6h/20)

So, the drawbridge rises h units in the time = (11h/2)/(6h/20)
= [tex]\frac{11h}{2}[/tex]×[tex]\frac{20}{6h}[/tex]

= 220/12

= 18.33 minutes

Hence, it takes 18.33 mins to raise the drawbridge.

To know more about drawbridge here:

A drawbridge rises at a constant rate. It takes 1 1/2 minutes for the drawbridge to rise 6/20 of its total height. How long does it take to raise a drawbridge?

To know about drawbridge

https://brainly.com/question/12459645

#SPJ4      

     

Block A has a mass of 10 kg and block B has a mass of
6 kg. They are connected by a rope and pulley system as
shown in the diagram on the right.

What must the coefficient of static friction be
between block A and the table for neither block to
move?

Answers

Acceleration will be zero when there is no movement.  The coefficient of static friction is 0.6

What is Friction ?

Friction is a force that opposes motion. It is static in a stationary object while dynamic in a moving object.

Given that Block A has a mass of 10 kg and block B has a mass of

6 kg. They are connected by a rope and pulley system as shown in the diagram in the question. Since both blocks are not moving, acceleration a = 0

The weight W on block B = mg

W = 6 × 9.8

W = 58.8 N

This weight will be equal to the tension T pulling block A. That is,

T = μN = W

Where the normal force N on block A = mg

N = 10 × 9.8

N = 98 N

Substitute N and T to find the coefficient of static friction μ

58.8 = 98μ

μ = 58.8/98

μ = 0.6

Therefore, 0.6 must be the coefficient of static friction between block A and the table for neither block to move

Learn more about Friction here: https://brainly.com/question/23161460

#SPJ1

A baseball with a mass of 0. 145 kilograms collides with a bat at a velocity of 44 meters/second. The ball bounces off the bat with a speed of 49 meters/second in the opposite direction. What is the impulse?.

Answers

The impulse is 13.5 newton∙seconds.

Calcultaion:-

for the reason that ball bounced off opposite to its unique path preliminary velocity and final velocity can have opposite signs and symptoms. And as a result we've the:

Δp = zero.145(forty nine -- forty four) = zero.145(93) = 13.485

Rounding the values off to a few massive figures, we have Δp = 13.5N·s.

Forces are weight drag and raise. elevate and drag are truly additives of a single aerodynamic force performing at the ball. in some unspecified time in the future of the 0.7 millisecond touch time amongst bat and ball collision, a median stress of about 2 heaps is applied, with a maximum force of about four masses. it is a selection of electricity.

Learn more about The impulse here:- https://brainly.com/question/20586658

#SPJ4

Other Questions
The nurse is caring for a client recovering from acute pancreatitis. Which menu item should the nurse remove from the clients breakfast tray?. this morning james had half as much money as his brother and 27 dollars less than his sister. then his brother paid james and his sister each 12 dollars to wash his car. after the payoff, james's sister has twice as much money as james's brother. how much money does james have now? the risk that income from a bond portfolio will vary because cash flows must be reinvested at current market rates is called . though process improvement initiatives come with a cost, benefits of more capable processes may outweigh and can include which of the following?less need for inspection, fewer service complaints, lower warranty costs 1 mole of an ideal ga i expanded from a volume of 1. 00 liter to a volume of 8. 93 liter againt a contant external preure of 1. 00 atm. How much work (in joule) i performed on the urrounding? suppose a mutant strain of escherichia coli k12 contains a mutation in the trpe gene and is no longer able to make tryptophan. what is this mutant called? at the time of appointment, how many consecutive years of experience is required in the practice of pharmacy for a registered pharmacist board member? Principal isA. The original amount investedB. The total amount earnedC. Interest plus original amount investedD. Interest on a loan Charlie sells cookies only in packages of 10. It costs him $3. 50 in materials per package. Additionally, he has overhead costs of $1,500 per month. In order to pay himself a monthly salary of $5,000, how many packages of cookies does charlie need to sell per month at $10 per package?. in which of the following strategies for entering the international marketplace is a new entity created which allows the domestic firm to enter the foreign company's market? Which was Venters contribution to science? discovered the existence of single-celled organisms invented the light microscope discovered the structure of DNA invented a synthetic cell TB MC Qu. 07-135 (Algo) On July 9, Mifflin Company receives...On July 9, Mifflin Company receives an $8,200, 120-day, 6% note from customer Payton Summers to replace an account receivable. What entry should be made byMifflin on the maturity date assuming the maker pays in full, and no adjusting entries have been made related to the note? (Use 360 days a year.)Multiple ChoiceDebit Cash $8,364, credit Interest Revenue $164; credit Notes Receivable $8,200Debit Cash $8,282; credit Interest Revenue $82, credit Notes Receivable $8,200.Debit Notes Receivable $8,200, debit Interest Receivable $164; credit Sales $8,364.Debit Cash $8,200, credit Notes Receivable $8,200. according to the 2018/2019 global entrepreneurship monitor (gem), the percentage of entrepreneurs in the united states has reached a nurse is caring for a client who has been prescribed propranolol for angina. after administering the drug, which action would the nurse do? Which describes an underground layer of porous and permeable rock that holds water. A transition that helps show the order in which events happened is a(n):adversative transitionsequential transitionadditive transitioncausal transitionplease be fast tysmmmm the solubility product constant of silver chromate ag2cro4 is 1.12 x 10^-12 m. calculate the molar solubility of the salt. A large office dek ha an area of 42ft2. If the width i 3. 5 feet, write an equation to repreent the area ositive analysis: a. involves the formulation and testing of hypotheses. cross out b. involves value judgments concerning the desirability of alternative outcomes. cross out c. weighs the fairness of a policy. cross out d. examines if the outcome is desirable. Methane is gas that is found in small quantities in earth's atmosphere. Methane is the simplest hydrocarbon, consisting of one carbon atom and four hydrogen atoms. It is a powerful greenhouse gas, flammable, and used as a fuel worldwide. Construct an explanation of how carbon and hydrogen combine to form methane.