The mole fraction of acetyl bromide is 0.534 and heptane is 0.466.
What is acetyl bromide?An acyl halide, sometimes referred to as an acid halide, is a chemical molecule created by swapping out the hydroxyl group in an oxoacid with a halide group.
The chemical has a -COX functional group, which is made up of a carbonyl group that is singly linked to a halogen atom, if the acid is a carboxylic acid. The general formula for such an acyl halide can be represented as RCOX, where X stands for the halide, such as chloride, and R may be, for example, an alkyl group. Although acyl chlorides are the most frequent acyl halides, acetyl iodide is the one that is created (temporarily) on a big scale. The annual manufacturing of acetic acid results in billions of kilograms.
To learn more about acetyl bromide from the given link:
https://brainly.com/question/13151076
#SPJ4
an object in motion remain or an at rests remains at unless it is acted upon by an outside force is known as
For the reaction 4ch3ch3 14no2, the rate of the reaction in terms of the change in nitrogen concentration would be written as:___________
For the reaction 4ch3ch3 14no2, the rate of the reaction in terms of the change in nitrogen concentration would be written as:+ (2/3) Δ[H2O]/Δt.
What is nitrogen ?The chemical element with the atomic number 7 and the letter N is known as nitrogen. The lightest element in group 15 of the periodic table, often known as the pnictogens, nitrogen is a nonmetal. It is a typical element in the cosmos, believed to be eighth in the Milky Way and the Solar System in terms of overall abundance. Two of the element's atoms combine to generate N2, an odorless and colorless diatomic gas, under standard pressure and temperature.
The majority of the atmosphere on Earth is made up of N2, making it the most prevalent uncombined element. All living things contain nitrogen, which is principally found in the amino acids that make up proteins, the nucleic acids that make up DNA and RNA, and the energy-transfer molecule adenosine triphosphate.
To learn more about nitrogen from the given link:
https://brainly.com/question/11483365
#SPJ4
In the equation below, carbon dioxide and water react to make sugar and oxygen. This reaction (photosynthesis) takes place inside plants and is the basis for almost all life on Earth.
6CO2 + 6H2O → C6H12O6 + 4O2
How many molecules of carbon dioxide are involved in this reaction? ______
How many molecules of sugar are produced in this reaction? ______
6 CO2 molecules are involved in this reaction which is in turn helping to produce 1 molecule of glucose.
How many molecules in total are there in photosynthesis?Commonly used notation for photosynthesis is: 6CO2 + 6H2O C6H12O6 + 6O2. This suggests that the transformation of the reactants—six carbon dioxide molecules and six water molecules—into the products—a sugar molecule and six oxygen molecules—takes place as a result of chlorophyll's absorption of light energy.How does CO2 function in photosynthesis?During photosynthesis, plants take up water (H2O) and carbon dioxide (CO2) from the soil and atmosphere.Water is oxidized, which means it loses electrons, while carbon dioxide is reduced, which means it receives electrons, inside the plant cell. This mechanism transforms water into oxygen and carbon dioxide into glucose.To learn more about photosynthesis visit:
https://brainly.com/question/1388366
#SPJ9
When h2so4 is neutralized by naoh in aqueous solution, the net ionic equation is ________.
When H₂SO₄ is neutralized by NaOH in an aqueous solution, the net ionic equation is:
2H⁺(aq) + 2OH⁻(aq) → 2H₂O(l)
A chemical equation known as an ionic equation expresses the electrolytes in an aqueous solution as dissociated ions. For the reaction between [tex]H_{2}SO_{4}[/tex] , NaOH that neutralizes it, we must write the net ionic equation.
The reaction's equilibrium chemical equation is:
[tex]Na_{2} SO_{4}[/tex](aq) + [tex]2H_{2}O[/tex] = [tex]H_{2}SO_{4}[/tex] (aq) + [tex]2NaOH[/tex](aq) (l)
We shall now draft the ionic equation.
The reaction's ionic equation is
[tex]2 Na ^{+} (aq) + SO_{4} ^{2-} (aq) + 2H_{2}O = 2H^{+} (aq) + SO_{4} ^{2-} (aq) + 2 Na ^{+} (aq)+ 2OH(aq) (l)[/tex]
The net ionic equation is then obtained by canceling out the spectator ions Na+ and SO42.
The neutralization reaction's net ionic equation is:
2H⁺(aq), 2OH⁻(aq), and 2H₂O (l)
In light of this, the net ionic equation for the neutralization of H2SO4 and NaOH is:
2H⁺(aq) + 2OH⁻(aq) → 2H₂O(l)
To know more about ionic equation refer to: https://brainly.com/question/15466794
#SPJ4
Suggest why some metals will react with hot water but not with cold water. Explain with one example. Draw figure.
The difference in the reactivity of metals accounts for why some metals will react with hot water but not with cold water. For example, aluminum is less reactive than sodium and will only react with hot water but not cold water.
What is reactivity of metals?The reactivity of metals is the ability of a metals to lose electrons.
The reactivity of metals generally decreases from left to right across the periodic table but increases on going down a group.
Due to the differences in reactivity of metals, some metals are more reactive than others.
For example, the reactive metals sodium, potassium and calcium react with cold water to with differing degree of spontaneity to liberate hydrogen.
Some other metal like aluminum, zinc, and iron can only react with hot water or steam to liberate hydrogen.
Therefore, the reactivity of a metal will determine if it will react with cold water or hot water.
Learn more about reactivity of metals at: https://brainly.com/question/28107797
#SPJ1
Sodium is an example of an ________ metal that reacts with water to form hydrogen gas and an ________ solution.
Sodium is an example of an alkali metal that reacts with water to form hydrogen gas and an alkaline solution.
Alkaline metals are lithium, sodium (Na), rubidium, potassium, cesium. They have low ionization energy and lose one electron very easy.
Atomic number of sodium is 11, it means that it has 11 protons and 11 electrons, so atom of sodium is neutral.
Electron configuration of the sodium atom: ₁₁Na 1s² 2s² 2p⁶ 3s¹.
Balanced chemical equation for the reaction of sodium with water:
2Na + 2H₂O → 2NaOH + H₂
NaOH is strong alkaline base.
H₂ is the hydrogen gas
More about sodium: brainly.com/question/25597694
#SPJ4
Which family (group) of elements has a valence-level electron configuration of 1?
a. noble gases
b. halogens
c. alkali metals
d. alkaline earth metals
The family (group) of elements that have a valence-level electron configuration of 1 are alkali metals. Hence, the answer is option C.
A group or family in the periodic table consists of all the elements arranged in a single vertical column. There are eighteen groups in total. Elements in the same group tend to have the same chemical properties because they contain the same number of electrons in their outermost shells (valence electrons).
Elements in the first group or group 1 have only one electron in their outermost shell. They are known as alkali metals. They are called alkali metals because they react with water to form bases or alkali. These metals must be stored under oil as they are very reactive and easily react with air and water.
Alkali metals are also very electropositive and form ions by giving out their one valence electron, carrying a charge of +1. The three alkali metals are Lithium (Li), Sodium (Na) and Potassium (K), with Potassium being the most electropositive.
Learn more about alkali metals here:
https://brainly.com/question/18153051
#SPJ4
why do we say the partials in a rock lying on the ground have kinetic energy and potential energy
Answer:
All particles of matter are always in constant motion. In this case, the particles of the rock possess kinetic energy as they vibrate in place. However, the particles also contain potential energy due to their position and arrangement. This form of stored energy is responsible for keeping the particles bonded together.
Explanation:
Why would a baseball team hire a physicist?
A. To design a stadium with the maximum number of seats
B. To make the team uniforms more comfortable
C. To work on the mechanics of a pitcher's throw
D. To inspect the balls for defects
Answer:
C. To work on the mechanics of a pitchers throw
or... A. To design a stadium with the maximum number of seats
Explanation:
Using the heat of vaporization in calculations
Calculate the mass of water (in g) that can be vaporized at its boiling point with 106 kj of heat. (the dhvaporization at boiling point is 40.7 kj/mol).
The mass of water(in g) that can be vaporized at its boiling point(100°C) with 106 kJ of heat is "46.879g".
According to question:
ΔHvap=40.7kJ/mol
Now,
To calculate the enthalpy change of a reaction we use the formula:
ΔHreaction=Heat/Number of moles
∵Heat absorbed=106kJ
& ΔHreaction=Enthalpy change of the reaction=40.7kJ/mol
∴The number of moles evaporated by 106 kJ heat will be:
106×1÷40.7=2.6044 mol
Now,Number of moles=Given mass/Molar mass
∵Molar mass of water=18
& Number of moles of water=2.6044
Thus,Mass of water=Number of moles×Molar Mass of water
=2.6044×18
=46.879g
∴Mass of water(in g) that can be vaporized at its boiling point=46.879g
LEARN MORE ABOUT LATENT HEAT OF VAPORIZATION HERE:
https://brainly.com/question/13372553
#SPJ4
Suppose an element has a valence of 2 and an atomic number of 27. based only on quantum numbers, how many electrons must be present in the 3d energy level?
There must be 7 electrons present in the 3d energy level.
The atomic number is 27.
Thus, for 1st energy level, there is only 1 subshell present which is 1s² containing 2 electrons.
For the 2nd energy level, there are 2 subshells which are
2s² = 2 e⁻s
2p⁶ = 6 e⁻s
The number of electrons at the third energy level, x, can be assumed.
Then, 1s²2s²2p⁶3s²3p⁶4s²3dˣ (valence = 2 requires 2 electrons in 4s).
In the third level, there must be 7 electrons
since 27 - (2+2+6+2+6+2) = 7 = x.
To know more about subshells visit the link:
https://brainly.com/question/19221869?referrer=searchResults
#SPJ4
Which organic reagents would you need to make 2-ethylheptanoic acid from diethyl malonate?
The reagents need for the formation of 2-ethyl heptanoic acid are Bromoethane, 1-bromopentane, sodium ethoxide, and potassium tert-butoxide.
When the bromoethane reacts with the diethyl malonate it formed the diethyl 2,2 - diethylmalonate.Bromoethane is an alkylating agent and used in substitution reaction and add alkyl group to the compound. 1-bromopentane carried out the elimination reaction.sodium ethoxide helps in extraction of hydrogen from the compound formed the negative on the compound. potassium tert-butoxide is strong non- nucleophile base which as strong as other bases. it is participating in nucleophilic addition reaction.it follows the SN 2 reactions and also participates in the dehydrohalogenation reaction.All the above reagents are used for the preparation of 2- ethyl heptanoic acid from diethyl malonate.All the above reagents are used for the preparation of 2- ethyl heptanoic acid from diethyl malonate.
Learn more about 2-ethylheptanoic acid and diethyl malonate here
https://brainly.com/question/9920237
#SPJ4
An 8.2 L sample is at -6°C, while a 4.361 L sample is at 56.7°C. The particles of which sample have a larger average kinetic energy?
Write out all work and show all units and use the correct number of significant figures.
The particles of the 4.361 L sample at 56.7°C will have larger average kinetic energy than that of 8.2 L sample at -6°C.
What is the average kinetic energy?The average kinetic energy for one molecule at temperature T is given by [tex]\frac{3}{2}kT[/tex], where [tex]T[/tex] is the absolute temperature.
The kinetic energy of any gas is directly proportional to its absolute temperature (T).
Therefore, K.E. ∝ T
The translational kinetic energy of a gas is independent of the pressure, the molecular mass, or the nature of the gas. It depends only on the absolute temperature of the gas.
The absolute temperature of the sample with a volume 8.2L at -6°C is: [tex]T= 273-6 = 267K[/tex]
The absolute temperature of the sample with a volume 4.361L at 56.7°C is:[tex]T=273+ 56.7 = 329.7K[/tex]
As the absolute temperature of the second sample is more than that of the first sample.
Therefore, the average kinetic energy of the molecules of the 8.2L sample at 56.7°C is larger than that of the 4.361L sample at -6°C.
To learn more about average kinetic energy, refer to the link below:
https://brainly.com/question/24134093
#SPJ1
Why is the Earth considered an open system?
matter
light and energy enter the system from the sun
energy and matter (gases) escape the system into space
all of the answers are true
(meteoroids/asteroids) can enter the system from space
Explanation: Any system within the Earth system is considered an open system. Because energy flows freely into and out of systems, all systems respond to inputs and, as a result, have outputs. For example, water and chemicals, as well as energy enter and leave the boundaries of a watershed system.
Hope this answers your question have a good day!
How many grams of methanol (ch3oh) must be added to water to prepare 191.8 ml of a solution that is 6.72 m methanol?
41296.22 g of weight of methanol (ch3oh) must be added to water to prepare 191.8 ml of a solution that is 6.72 m methanol
Molarity of reactions happen in solutions and so it is important to understand how the amount of substance is expressed when it is present in the solution. It is one of the most widely used unit of concentration and is denoted by M. It is defined as no. of moles of solute present in 1 liter of solution. Thus, it define as N = n /VIt is given that 191.8 ml of 6.72 M methanol is to be prepared.
Using the Molarity formula , we get
6.72 = n / 191.8
n = 6.72 × 191.8
n = 1288.89 g / mol
Molar mass of methanol = 32.04g/mol
Weight of methanol to be added= 32.04 ×1288.89 = 41296.22 g
Learn more about Molarity here :
https://brainly.com/question/489225
#SPJ4
sort the following statements as facts, theories or laws
We know that a fact is something that has been established to be true and does not need any kind of verification as it can be observed clearly and seen. A law is something that has gone through the rigorous process of scientific investigation and has been established to be true. A theory is an explanation for a scientific observation.
The Pacific Plate is moving at a rate of approximately 7 cm per year - FactSome diseases are caused by microorganisms that grow and reproduce in a living host - TheoryThe electrical current through a conductor is directly proportional to the voltage across the conductor - LawIn a closed system the sum of all momenta within the system is constant - LawLearn more about theories:https://brainly.com/question/14543764
#SPJ1
What is the name given to an ion that has lost electrons? someone help me please D:
The name given to an ion that has lost electrons is cation. Details about cations can be found below.
What is a cation?A cation is a positively charged ion i.e. the one that would be attracted to the cathode in an electrolytic procedure.
Generally, an ion is an electrically charged atom. An ion can either be positively charged or negatively charged. The latter is called an anion while the former is called a cation.
A cation is formed when an atom loses electrons to become positively charged while an anion is formed when an atom accepts electrons to become negatively charged.
Therefore, it can be said that the name given to an ion that has lost electrons is cation.
Learn more about cation at: https://brainly.com/question/1488567
#SPJ1
why does water not dissolve in water
Answer:
Water dissolves with water because both are polar solvents
[tex].[/tex]
A sample of aluminum has a mass of 14.24 g and a volume of 5.27 cm3 . what is the mass of a 49.7 cm3 sample of aluminum?
The mass of a 49.7 cm3 sample of aluminum is 134.29 g.
What is the weight of aluminum in grams?A mole of Al atoms has a mass in grams that is numerically equivalent to aluminum's atomic mass. According to the periodic table, the atomic mass (rounded to two decimal points) of Al is 26.98, so 1 mol of Al atoms weighs 26.98 g.Aluminum has a molar mass of 27 grams per mole. As a result, 1 mole of aluminum weighs 27 grams. As a result, the total number of moles in 9 grams of aluminum is 9g/27g.mol-1 = 0.33 moles.Aluminum has a molar mass of 26.982 g/mol.An aluminum atom has 13 electrons arranged in a [Ne] 3s2 3p1 electron configuration, with three electrons beyond a stable noble gas configuration. As a result, aluminum's combined first three ionization energies are much lower than the fourth ionization energy alone.
To learn more about weight of aluminum refer to
https://brainly.com/question/6258301
#SPJ4
The ____________ of a protein is the sequence of amino acids that are attached together by ____________ bonds.
The primary structure of a protein is the sequence of amino acids that are attached together by peptide bonds.
Amino acids are the building blocks of proteins, and the primary structure of a protein is the sequence of amino acids that are attached together by peptide bonds. Peptide bonds are formed when the carboxyl group of one amino acid reacts with the amino group of another amino acid, and the resulting molecule is called a peptide.
The primary structure of a protein is important for its function, as it determines the three-dimensional structure of the protein. The three-dimensional structure of a protein is vital for its function, as it determines how the protein interacts with other molecules. Proteins are important for many biochemical processes in the body, such as metabolism, cell signaling, and DNA replication.
The primary structure of a protein can be altered by mutations, which are changes in the DNA sequence that encodes the protein. Mutations can be caused by environmental factors, such as UV light or chemicals, or they can be inherited. Inherited mutations are responsible for many genetic disorders, such as sickle cell disease and cystic fibrosis.
Learn more on amino acid here:
https://brainly.com/question/500797
#SPJ4
An object with a mass of 1072 g
measures 6 cm wide, 7.3 cm high
and 15.2 cm long. What is the
density of the object?density
The Density of the given object is 1.61gm/cm³.
How closely a material is packed together is determined by its density. It is defined as the mass per unit volume.Volume is the cubic measurements used to determine how much space a three-dimensional object takes up.formula of volume : V = l × w × hUnit of density is g/cm³ or kg/m³ and unit of volume is cm³ or m³ or mL or L.Given,
mass of the object = 1072g
Length of the object = 15.2 cm
width of the object = 6 cm
height of the object = 7.3 cm
Therefore volume of the object V = l × w × h
V = 15.2 × 6 × 7.3
= 665.76 cm³
As we know,
Density = Mass / Volume
Density = 1072 / 665.76
= 1.61 g/cm³
Therefore, the density of given object is 1.61 g/cm³.
Learn more about Density here:
https://brainly.com/question/1354972
#SPJ9
Zinc oxide is found in ointments for the skin. what formula best describes this compound, which has zn as a doubly charged cation? group of answer choices
a. zn2o2
b. zno
c. zn2o
d. zn2o3
e. zno2
The correct answer is ZnO (Zinc oxide).
Zn is doubly charged because ,Zn has 2 valency or we can say that zn contain 2 valence electron and has capacity to donate two electrons to oxygen. Oxygen can gain two electron from zinc to form zinc oxide.
Zinc oxide is applied to soothe minor skin irritations such diaper rash, burns, and cuts. You can use some things as sunscreen.
Only apply this medication to the skin. Observe all usage instructions on the product's packaging or those provided by your doctor. Ask your physician or pharmacist if you have any queries. Take care not to get this medication in your eyes. If the drug does go in your eyes, thoroughly rinse them with water. Only use this medication externally. Take not by mouth means the oral route of this medication should not be prescribed.
To learn more about zinc oxide, refer this link.
https://brainly.com/question/1370574
#SPJ4
Why might activated carbon be added to a sample during the recrystallization process?.
Activated carbon might be added to a sample during the recrystallization processt to absorb impurities causing the recrystallization solution to have incorrect color.
Recrystallization is a technique (process) used to purify chemicals by dissolving both the impurities and a compound in an appropriate solvent, either compound or impurities can be removed from the solution, leaving the other behind. During the recrystallization, the impurities must also be soluble in the solvent.
Activated carbon is a form of carbon (C) used to filter an impurities from the solutions. It is activated to have pores that increase the surface area available for adsorption.
More about the recrystallization: brainly.com/question/15703840
#SPJ4
1.00 g of carbon is combusted in a limited supply of pure oxygen. 0.50g of the carbon combusts
to form CO₂ and 0.50g of the carbon combusts to form CO.
The resultant mixture of CO₂ and CO is passed through excess NaOH(aq) and the remaining gas
is then dried and collected.
What is the volume of the remaining gas? (All gas volumes are measured at 25°C and
1 atmosphere pressure.)
A 1dm³
B 1.5 dm³
C 2 dm³
D 3 dm³
Answer:
Explanation:d
Use the table below to calculate the atomic
mass of element X. Then use the periodic table
to identify the element. Show all your work.
Please help. This has to be done soon and correct
A piece of magnesium with a mass of 5.867 g was heated in a crucible which was open to the air. After the magnesium had combusted and allowed to cool down the product was found to have a mass of 8.956 g. Determine the empirical formula of the magnesium oxide formed.
The empirical formula of the magnesium oxide formed is MgO
Here given data is piece of magnesium with a mass = 5.867 g after the magnesium had combusted and allowed to cool down the product and mass = 8.956 g
The empirical formula is the simplest whole number ratio of atoms in a compound and the ratio of atoms is the same as the ratio of moles and when crucible react with magnesium and air means oxygen then magnesium reacts readily with oxygen in the air, to produce magnesium oxide then chemical reaction is written as follows:
2Mg + O₂ → 2MgO
and hence when it cool down automatically the mass of magnesium is more than 1st mass because in that oxygen of air are added and that's why MgO are made the empirical formula of the magnesium oxide formed is MgO
Know more about magnesium oxide formed.
https://brainly.com/question/28568488
#SPJ1
Select a number of substances with which KOH reacts
1) SO2, HNO3, BaCO3
OR
2) CO2, Zn(NO3)2, H3PO4
Different substances are given as SO₂, HNO₃, BaCO₃, CO₂, Zn(NO₃)₂, H₃PO₄
KOH reacts with SO₂ at a lower temperature,
KOH + SO₂ → K₂ SO₃ + H₂ O
Nitric acid (an acid) and potassium hydroxide (a base) combine to form potassium nitrate (salt) and water.
KOH + HNO₃ → KNO₃ + H₂O
When substance potassium hydroxide and Barium carbonate,
KOH + BaCO₃ → K₂ CO₃ + Ba(OH)₂
Carbon dioxide and potassium hydroxide react to produce potassium carbonate and water. Carbon dioxide is taken out of the space station using potassium hydroxide.
KOH + CO₂ → K₂ CO₃ + H₂O
Potassium hydroxide reacts with zinc nitrate,
Zn(NO₃)₂ + KOH → Zn(OH)₂ + KNO₃
Potassium phosphate and water are created when potassium hydroxide and phosphoric acid combine.
KOH (aq) + H₃ PO₄ (aq) → K₃ PO₄ (aq) + H₂O (l)
Learn more about substances here:
https://brainly.com/question/24647756
#SPJ9
mira added vanilla flavored liquid to a cake and heated . The resulting cake is having vanilla flour. What could have happened
The change in the taste of the cake to vanilla flour is an example of a chemical change.
What are chemical changes?Chemical changes are changes which occur when substances undergo changes that are no easily reversible an in which new substances are formed.
During chemical changes, large amounts of heat changes occur.
Some example of chemical changes is in the rusting of iron, the baking of breads and cake from a mixture of flour sugar and various flavors.
In the given scenario, Mira added vanilla flavored liquid to a cake and heated which resulted in a cake is having vanilla flour. The change in the taste of the cake after the vanilla flavor was added and the cake heated is an example of a chemical change.
Learn more about chemical change at: https://brainly.com/question/19794032
#SPJ1
Each of the following pairs of elements will react to form an ionic compound. Write the formulas and name these compounds: (a) barium and oxygen, (b) calcium and phosphorus, (c) aluminum and sulfur, (d) lithium and nitrogen
(a) barium and oxygen - Braium oxide ([tex]BaO[/tex])
(b) calcium and phosphorus - Calcium phosphate - ([tex]Ca_{3}(PO_{4})_{2}[/tex])
(c) aluminum and sulfur - Aluminum Sulfide [tex]Al_{2}S_{3}[/tex]
lithium and nitrogen - Lithium nitride [tex]Li_{3} N[/tex]
What is an ionic compound?The term ionic compound refers to a compound that is formed when ions are combined together. We know that ionic compounds are crystalline and that they are also soluble in water and polar solvents. Most importantly, the ions are arranged in a very definite pattern.
Now let us see the names of the compounds formed by each pair;
(a) barium and oxygen - Braium oxide ([tex]BaO[/tex])
(b) calcium and phosphorus - Calcium phosphate - ([tex]Ca_{3}(PO_{4})_{2}[/tex])
(c) aluminum and sulfur - Aluminum Sulfide [tex]Al_{2}S_{3}[/tex]
lithium and nitrogen - Lithium nitride [tex]Li_{3} N[/tex]
Learn more about ionic compounds:https://brainly.com/question/9167977
#SPJ1
