A solution with 8.35 g of a non-electrolyte solute in 50.0 g naphthalene (Kfp = 6.90°C/m) freezes at 76.5°C. Pure naphthalene freezes at 81.0°C. What is the molar mass of the solute?

Option d. increased temperature and increased concentration of reactants will increase the rate of a chemical reaction.

The rate of a chemical reaction can be defined as the speed at which a chemical reaction occurs, which is typically expressed in terms of the change in concentration of a reactant or product over time.

Therefore, with this data, we can see that the rate of a chemical reaction is a measure of how quickly the reactants are converted into products in a chemical process.

Learn more about the rate of a reaction here:

https://brainly.com/question/23637409

#SPJ1

The movement of an electron around the nucleus is described by a mathematical function, which is called or known as an atomic wave or an atomic orbital. Hence the answer is - a wave and an orbital.

In the concept of quantum mechanical model of the atom, electrons (negatively charges particles) are seen as a wave substances/matters which cover a 3-d space around/near the nucleus. The motion of these electrons is explained by a wave function, that is called or known as an atomic orbital.

Wave function : A wave function is a mathematical function which tells the position of any particular electron around it's nucleus.

Atomic Orbital : It too, explains the position of any particular electron around it's nucleus and also the wave behavior of that electron of any specific atom.

The Quantum Mechanical model of an atom is used to explain/calculate the position and functioning of any particular electron and also explains the different energy levels such as - orbitals; energy sublevels; and principal energy levels.

Learn more about the quantum mechanical model of the atom here:

https://brainly.com/question/13352063

#SPJ4

The correct question should be:

In the quantum-mechanical model of the atom, an electron is viewed as a wave-particle that occupies a three-dimensional space near the nucleus. the movement of the electron is described by a function, which is also called an atomic _______.

There are 1000 g in one kg. It is a correctly reflect the relationship between SI units and units containing decimal prefixes.

What is meant by SI units?

To learn more about SI units refer to

https://brainly.com/question/18779569

#SPJ4

[tex]ch3ch3ch3[/tex] is the one compounds is a gas at room temperature.

What is the ideal room temperature?

Generally speaking, room temperature refers to a range of air temperatures that people favour indoors. When someone is dressed in regular indoor attire, they feel at ease. Depending on humidity, air circulation, and other factors, human comfort can go beyond this range.

Around 20°C, or 68° Fahrenheit, is usually the standard room temperature. Though it's crucial to keep in mind that different rooms will need to be heated to different temperatures, this is a good ambient temperature to aim for.

Store at 15°-25°C (59°-77°F) above room temperature. Ambient temperature: Keep your items at the temperature outside. Considering the vast range of ambient temperatures, this word is not commonly used.

Molecules with the stronger intermolecular forces are pulled tightly together  to form solid at higher temperatures and that's why the freezing point is higher.

Also, molecules with the stronger intermolecular force have greater interaction between the molecules and thus on heating do not boil easily and have high boiling point also.

Thus, melting point and boiling point increases with increase in number of carbon atoms and also increase in intermolecular forces (like hydrogen bonding, if present).

Thus, the compound which is gas at room temperature is  because it has least number of carbon atoms and absence of hydrogen bonding.

Learn more about room temperature refer to :

brainly.com/question/17410084

#SPJ4

The law of definite proportions states that regardless of the amount of reactants used, a chemical reaction will always produce the same proportion of products. In this case, both reactions will produce the same mole ratio of PCL3 (1:1) even though they produce different numbers of moles of the product. To demonstrate this, let's take a look at the first reaction:

Reaction 1:

2HCl + Ca3(PO4)2 → 2CaCl2 + PCl3

2 moles of HCl + 1 mole of Ca3(PO4)2 → 2 moles of CaCl2 + 1 mole of PCl3

Therefore, the mole ratio of PCL3 is 1:1.

Now let's look at the second reaction:

Reaction 2:

HCl + P4O10 → PCl3 + H3PO4

1 mole of HCl + 2 moles of P4O10 → 1 mole of PCl3 + 2 moles of H3PO4

Once again, the mole ratio of PCL3 is still 1:1. Therefore, both of these chemical reactions obey the law of definite proportions.

What is definite proportions?

Definite proportions law states that a given compound always contains the same elements in the same proportions by mass. This law, also known as the law of constant composition.

To learn more about definite proportions

Here: https://brainly.com/question/1496091

#SPJ4

The volume of a piece of copper with a weight of 48.218g is 5.45mL.

A graph is a data chart (graphical representation of data) intended to illustrate the relationship between a set (or sets) of numbers (quantities, measurements or indicative numbers).

According to this question, a graph is shown above with mass (g) on the y axis and volume (mL) on the x axis.

Based on the data provided in the graph, the following expression was given:

y = 8.8521x

y represents the mass while x represents the volume

48.218g = 8.8521x

x = 48.218 ÷ 8.8521

x = 5.45mL

Therefore, 5.45mL is the volume at that weight.

Learn more about graph at: https://brainly.com/question/17267403

#SPJ1

5 types of chemical reaction are as follows with example- decomposition reaction, single replacement reaction, double replacement reaction, combustion reaction.

1. Fe + O2 = FeO: This is a synthesis reaction. It involves the formation of a new compound (FeO) from simpler reactants (Fe and O2).

2. 2H2O2 = 2H2O + O2: This is a decomposition reaction. It involves the breakdown of a more complex compound (H2O2) into simpler products (H2O and O2).

3. Zn + CuSO4 = ZnSO4 + Cu: This is a single replacement reaction. It includes swapping out one ingredient in a compound for another. In this case, Zn replaces Cu in the compound CuSO4.

4. Fe(NO3)2 + K2Cr2O7 = FeCr2O7 + 2KNO3: This is a double replacement reaction. It involves the exchange of positive ions between two compounds to form two new compounds.

5. CH4 + 2O2 = CO2 + 2H2O + heat: This is a combustion reaction. It involves the burning of a hydrocarbon (CH4) in the presence of oxygen to produce carbon dioxide, water, and heat.

To know more about single replacement please refer: https://brainly.com/question/19267538

#SPJ4

1. For large atoms, more neutrons than

2. protons are needed to be stable.

Nuclei that have 90 or greater protons are always radioactive.

Isotopes are two or more types of atoms that have the same atomic number and place in the periodic table but differ in nucleon numbers because their nuclei contain differing quantities of neutrons. The atomic number of an element on the Periodic Table is determined by the number of protons in its nucleus. Carbon, for example, contains six protons and has atomic number 6.

Isotopes have chemical characteristics that are same but have drastically distinct nuclear properties. For example, hydrogen has three isotopes. Isotopes are used to define human illness, identify illegal drugs at international borders, sterilise medical equipment, and power space exploration batteries. Isotopes are also used in agriculture, astronomy, biology, chemistry, materials science, medicine, and nuclear safety studies.

To learn more about isotopes, here

https://brainly.com/question/11680817

#SPJ4

Examples of hazardous waste are: Abandoned chemicals, Chemicals that can't be used or are unwanted, Residues in chemical containers, Unlabeled chemicals, Chemicals in deteriorating containers

"Food" and "Pipette tips not contaminated with hazardous materials" are not examples of hazardous waste. Hazardous waste is defined as any material that is potentially dangerous or harmful to human health or the environment. They are regulated by the government and require special handling and disposal. A hazardous material, also known as a hazardous substance or a dangerous good, is any material that poses a potential threat to human health or the environment if not handled or disposed of properly. These materials may be in the form of liquids, solids, gases, or chemicals and can include things like pesticides, acids, explosives, radioactive materials, and toxic substances

Learn more about hazardous waste here:

https://brainly.com/question/17210736

#SPJ4

Answer:

the organs of sexual reproduction is the flower. male gametes is found in pollen grains and produced in the anthers of the flower. female gametes i found in ovules and produced inthe ovary of the flower.

The number of moles of C₃H₈ that must be consumed via the given reaction is 0.168 mole

We'll begin by obtaining the mole of CO₂ produced. Details below:

PV = nRT

3.68 × 4 = n × 0.0821 × 355

Divide both sides by (0.0821 × 355)

n = (3.68 × 4) / (0.0821 × 355)

n = 0.505 mole

Finally, we shall determine the mole of C₃H₈ consumed by the reaction. This is illustrated below:

C₃H₈ + 5O₂ -> 3CO₂ + 4H₂O

From the balanced equation above,

3 moles of CO₂ were obtained from 1 mole of C₃H₈

Therefore,

0.505 mole of CO₂ will be obtained from = (0.505 × 1) / 3 = 0.168 mole of C₃H₈

Thus, number of mole of C₃H₈ consumed is 0.168 mole

Learn more about number of mole:

https://brainly.com/question/23350512

#SPJ1

Answer:

Sodium nitrate can be produced by reacting sodium hydroxide (NaOH) and nitric acid (HNO3) together.

Explanation:

Sodium nitrate is produced by the reaction between sodium chloride (NaCl) and nitric acid (HNO3). The chemical equation for this reaction is:

NaCl + HNO3 → NaNO3 + HCl

In this reaction, sodium chloride (table salt) and nitric acid react to form the soluble salt, sodium nitrate and hydrogen chloride as a byproduct. The reaction is exothermic and generates heat.

Silver nitrate and sodium chloride are both soluble

Instead of Fossil Fuels to generate power, nuclear energy uses Uranium. Therefore, among all the given options, the correct option is option C.

Any of a group of hydrocarbon-containing compounds of biological origin that are found in the Earth's crust and may be utilized as a source of energy are known as fossil fuels.

Coal, petroleum, oil and gas, oil shales, bitumen, tar sands, other heavy oils are examples of fossil fuels. Even before Devonian Period (419.2 to 358.9 million years ago), the majority of carbonaceous material came from algae and bacteria, but the majority of carbonaceous material that formed during and after that time came from plants. Instead of Fossil Fuels to generate power, nuclear energy uses Uranium.

Therefore, among all the given options, the correct option is option C.

To know more about Fossil Fuels, here:

https://brainly.com/question/29770775

#SPJ2

The amount of medication required in grams per pound of body weight is 0.00363 g/lb.

The conversion factor between pounds and kilograms is given below:

1 kg = 2.20462 lb

The data given is as follows:

The prescription medication requirement  = 8.00 mg/kg

We use the conversion factor to convert the given amount to grams per pound of body weight.

1 kg = 2.20462 lb

1 g = 1000 mg

Hence;

8.00 mg = 8.00 * 1 g/1000 mg

8.00 mg = 0.008 g

The given amount of medication required in grams per pound of body weight = 0.008 g / 2.20462 lb

medication required in grams per pound of body weight = 0.00363 g/lb

Learn more about pounds and kilograms at: https://brainly.com/question/29761698

#SPJ1

Complete question:

A prescription medication requires 5.98 mg per kg of body weight. Convert this quantity to the number of grams required per pound of body weight.  Express your answer to three significant figures.

a. The temperature of a gas is directly proportional to its volume

c. The temperature-to-volume ratio of a gas is constant. are the correct options.

Determine the temperature to volume ratios using three significant figures:

298 / 4.55 = 65.5

315 / 4.81 = 65.5

325 / 4.96 = 65.5

These figures then demonstrate a constant temperature-to-volume ratio, which may be represented mathematically as follows:

Volume x Temperature has a straight proportional fluctuation of constant (the volume increases in a constant proportion to the increase of the temperature).

A gas's volume and temperature are inversely proportional. A gas always has the same ratio of temperature to volume. The data in the table show that volume increases at the same rate as temperature.

complete question:A student measures the volume of a gas sample at several different temperatures. The results are tabulated as follows:Temperature of gas (K)    Volume of gas (L)

                   298                                  4.55

                   315                                   4.81

                   325                                  4.96

                  335                                                                                    Formulate a tentative law from the measurements.Check all that apply.

a. The temperature of a gas is directly proportional to its volume.

b. The temperature of a gas is inversely proportional to its volume.

c. The temperature-to-volume ratio of a gas is constant.

d. The temperature-to-volume ratio of a gas isn't constant.

learn more about temperature Refer:brainly.com/question/13294753

#SPJ4

For the chemical reaction 2HCl(aq) + Ca(s) → CaCl2(aq) + H2(g), Phases are aq (aqueous), s (solid), g (gas)

Identify the phases of HCl(aq) + Ca(s)→CaCl2 (aq) + H2(g)

A solution made up of molecules dissolved in water is referred to as an aqueous (aq) solution. Any substance that is made up of molecules and is held together in a rigid, organized form is referred to as a solid (s).

A substance that is made up of molecules that are not bonded together in an organized form and are free to move about the surrounding area is referred to as gas (g).

According to the provided chemical equation, solid calcium (Ca) and aqueous hydrochloric acid (HCl) react to produce aqueous calcium chloride (CaCl2) and hydrogen gas (H2).

Solid calcium is made up of molecules held together in an organized, rigid structure, whereas aqueous hydrochloric acid is made up of molecules that are dissolved in water.

Aqueous calcium chloride and hydrogen gas are produced when these two chemicals react. Hydrogen gas is made up of molecules that are not held together in an ordered form and are free to move around the environment, whereas aqueous calcium chloride is made up of molecules that are dissolved in water.

To learn more about chemical equation refer :

https://brainly.com/question/26694427

#SPJ1

Answer:

7.87g/mL

Explanation:

density is mass/volume...

you add 9.6g of iron. that is the mass

the water increases by 1.22ml, that is the volume

9.6g/1.22ml = 7.87g/mL

Answer: The solution will be 1.122018454x more acidic

Explanation: It's pretty simple, so since pH uses the Log scale, just do [tex]10^{0.05}[/tex]

And you'll get the answer. Also this gets less acidic since pH goes down.

Hope this helps!

An elimination reaction would be the conversion carbon of lodocyclohexane to cyclohexene. An elimination reaction is a chemical process that involves the removal of two substituents.

from the same carbon molecule, resulting in the production of a double bond. Lodocyclohexane is transformed to cyclohexene in two steps by the removal of two substituents, culminating in the creation of a double bond. This process is unique to elimination reactions, as opposed to substitution reactions, which entail the substitution of one substituent with another.double bond. Lodocyclohexane is transformed to cyclohexene in two steps by the removal of two substituents, culminating in the creation of a double bond.l the substitution of one substituent with another.double bond. Lodocyclohexane is transformed to cyclohexene in two steps by the removal of two substituents,.

learn more about carbon  here:

https://brainly.com/question/22530423

#SPJ4

answer:

3004838

Explanation:

3+939$

The increase in conductivity indicates that the unknown is an ionic solid that dissociates into ions when it dissolves in water.

What is meant by conductivity?

To learn more about conductivity refer to

https://brainly.com/question/28869256

#SPJ4

A molecular compound is defined as a molecule whose formula states the actual number of atoms bonded together in the molecule.

The atoms are joined to give a definite shape which is defined by the angles between the bonds and by the bond lengths. Molecular compounds can contain discrete molecules, which are held together by sharing electrons in covalent bonding.

Examples of molecular compounds are water, which contains H2O molecules; methane contains CH4 molecules; and hydrogen fluoride, which contains HF molecules.

As a rule of thumb, compounds that are involved in a metal binding with either a non-metal or a semi-metal will display ionic bonding.

Compounds can be composed with only non-metals or semi-metals and non-metals will display covalent bonding and will be classified as molecular compounds.

To know more about molecular compounds:

https://brainly.com/question/18158405

#SPJ4

The  atomic models in task 1  that are not supported by Thomson’s experimental evidence are Dalton's atomic model and Rutherford model.

Dalton's atomic model proposed that atoms were indivisible and indestructible, and that atoms of different elements had different weights and properties. But Thomson's experiment, which found that atoms are divisible and can be split into smaller particles called electrons, disproved this model.

Also, Rutherford's atomic model proposed that atoms were made up of a dense central nucleus of protons and neutrons, surrounded by a cloud of electrons. But Thomson's experiment, which found that electrons are spread evenly throughout the atom and not concentrated in a central nucleus, disproved this model.

Learn more about atomic models from

https://brainly.com/question/20349334
#SPJ1

Answer:

M - Nitrate is likely to increase in ocean water when nearby rivers flood.

Explanation:

As the nitrogen compounds are carried into the ocean, the nitrogen can be used by phytoplankton and other marine organisms, which can lead to a bloom of these organisms. This in turn can lead to an increase in the concentration of nitrate in the ocean water.

H2O(s), or water in its solid state, is classified as a molecular compound

A molecular compound is a type of chemical compound made up of molecules. These molecules are composed of atoms from two or more different elements that are chemically bonded together. The atoms are held together by covalent bonds, in which electrons are shared between atoms. Examples of molecular compounds include water (H2O), carbon dioxide (CO2), and sugar (C12H22O11).The chemical structure of water, H2O, consists of two hydrogen atoms (H) and one oxygen atom (O). The chemical bond between the hydrogen and oxygen atoms is a covalent bond, in which electrons are shared between the atoms. The molecule has a bent shape with an angle of 104.5 degrees between the hydrogen atoms.

learn more about molecular compounds here:

https://brainly.com/question/3648919

#SPJ4

The molarity of the solution (0.26 M). The result is 1.46 L, which is the volume of the solution that would contain 0.38 mole of Na₂MnO4.

Molarity is a unit of measure used to indicate the concentration of a solute in a solution. It is expressed in moles of solute per liter of solution (mol/L). This measure is useful for describing the amount of a particular chemical species present in a solution, as well as for determining the amount of a reactant or product that is produced in a chemical reaction. Molarity is also used to calculate the amount of a substance that must be added to a solution to achieve a desired concentration.

The number of liters of a 0.26 M solution of Na₂MnO4 that would contain 0.38 mole of Na₂MnO4 can be calculated using the following equation:
Volume (L) = moles (mol) / Molarity (M)
Therefore, the volume of a 0.26 M solution of Na₂MnO4 that would contain 0.38 mole of Na₂MnO4 is:
Volume (L) = 0.38 mol / 0.26 M
Volume (L) = 1.46 L

To learn more about molarity
https://brainly.com/question/14469428
#SPJ1

Solvents affect the polymers in way that they affect the strength of non-bonding interactions, which in return control the formation of supramolecular polymers in solution.

Solvents affect the polymers in way that they affect the strength of non-bonding interactions, which in return control the formation of supramolecular polymers in solution. Solvent effects and implications/parameters measured in supramolecular polymer systems are selectively reviewed. A rather new solvent scale, solvation ability (SA), which is based on the balance point between extended and stacked polymers is then introduced.

One of the most common processes used to produce polymer nanoparticles, is the solvent-displacement method, wherein the polymer is first dissolved in a "good" solvent and then the solution is mixed with an "anti-solvent". The processability of the polymer is therefore determined by polymer's structural and transporting properties in solutions of pure solvents and at the intermediate compositions.

If we put a polymer molecule into a pure solvent, three things might happen to it.

-it might curl up on itself

-it might not really notice/react with the solvent

-it might prefer the solvent used, to itself, and stretch out.

Learn more about polymers here:

https://brainly.com/question/17354715

#SPJ4

An unknown substance and it is green-blue in color, it is a solid, and is not malleable. The volume of this unknown sample if you have 14.5 grams is 2.75 × 10⁶ ml.

The properties of the substance is : green-blue in color, it is  solid, and is not malleable.

The formula for the density is given as :

The density = mass / volume

where,

The density = 5.621 g/m³ = 5.261 × 10⁻⁶ g/ml

The mass = 14.5 g

The volume is = mass / density

The volume = 14.5 / 5.261 × 10⁻⁶

The volume = 2.75 × 10⁶ ml

To learn more about density here

https://brainly.com/question/13403300

#SPJ4

She most likely works as a health psychologist because she combines resistance training with cardio exercise (jogging, swimming, and bicycling) (moderate weightlifting).

A healthy heart is mostly dependent on physical activity. It's one of your best tools for building up your heart muscle, controlling your weight, and defending your arteries against damage brought on by high blood pressure, blood sugar, and cholesterol that can result in a heart attack or stroke.

Aerobic exercise, such as jogging, swimming, cycling, walking, gardening, and dancing, has been shown to lessen anxiety and depression.

To know more about heart attack visit:-

https://brainly.com/question/816481

#SPJ1

Chlorine reacts reversibly with water to give a mixture of hypochlorous acid and hydrochloric acid.

Cl2+H2O⇔HOCl+HCl

Because of this reaction, it is able to act as a disinfectant for water sterilization.

What is sterilization?

To know more about sterilization, click the link given below:

https://brainly.com/question/14592067

#SPJ4