A toaster oven indicates that it operates at 1500 W on a 110 V
circuit. What is the resistance of the oven?

Answer:

Explanation:

Momentum is the quantity of motion of a moving body, measured as a product of its mass and velocity.

The period of an oscillating body is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at a time arbitrarily chosen as the beginning of the oscillation.

Friction is a force between two surfaces that are sliding, or trying to slide, across each other.  Friction always slows a moving object down. The amount of friction depends on the materials from which the two surfaces are made. The rougher the surface, the more friction is produced.

[tex]R=\frac{R1.R2}{R1+R2} = \frac{12.4}{12+4}=\frac{48}{16}=3<ohms>[/tex]

The answer is : C. 3.0 ohms

Ok done. Thank to me :>

Answer: f=20 (i think)

Explanation:

all I did was divide 300 and 15.

300/15= 20

Answer:

The temperature will no longer rise with the heat because the energy. When the water is boiled on the steam, the temperature rises when heat is given

Explanation:

The acceleration of the bicycle is 0.12 m/[tex]s^{2}[/tex].

We know that acceleration is the change in velocity divided by the change in time. In this case, the bicycle is accelerating from rest to a velocity of 6 m/s. The change in time is the time it takes the bicycle to travel 50 m.

We can use the following equation to find the acceleration:

a = (v2 - v1) / t

where:

a is the acceleration

v2 is the final velocity (6 m/s)

v1 is the initial velocity (0 m/s)

t is the time

Plugging in the values from the problem, we get:

a = (6 m/s - 0 m/s) / 50 s

= 0.12 m/[tex]s^{2}[/tex].

Therefore, the acceleration of the bicycle is 0.12 m/[tex]s^{2}[/tex].

To know more about acceleration here

https://brainly.com/question/2303856

#SPJ3

Answer:

a. 2.5 m/s

Explanation:

50 / 20 = 2.5 m/s

Answer:

4.3333333

Explanation:

total distance / total time taken

30 + 2 + 20 / 3 + 4 + 5

52 / 12

4.3 recurring

Answer:

im not the best at this but im gonna try helping you

Explanation:

1. li est deux heures cinquante

2. il est huit heures et demie

3. il est douze heures

4. il est quatre heures cinq

5. il est quatre heures quarante cinq

Answer:

The answer is true I guess!!!

This is because the more you go up to less air it is and the pressure also gets less!!!!!!!!

Explanation:

I HOPE THAT I WAS HELPFUL TO YOU!

Answer:

Answer:

Speed of the wave in the string will be 3.2 m/sec

Explanation:

We have given frequency in the string fixed at both ends is 80 Hz

Distance between adjacent antipodes is 20 cm

We know that distance between two adjacent anti nodes is equal to half of the wavelength

So \frac{\lambda }{2}=20cm

2

λ

=20cm

\lambda =40cmλ=40cm

We have to find the speed of the wave in the string

Speed is equal to v=\lambda f=0.04\times 80=3.2m/secv=λf=0.04×80=3.2m/sec

So speed of the wave in the string will be 3.2 m/sec

Answer: 3

Explanation:

I think you are supposed to divided in those problems? I'm not sure but if you aren't then please let me know. The equation I did was:

12.6 / 4.2 = 3

Hope this helps!! :)

975 J of heat energy is needed to increase the temperature from 150°C to  250°C of given mass of gold.

From specific heat formula,

[tex]Q = mc \Delta T[/tex]

Where,

[tex]Q[/tex] - Heat absorbed

[tex]m[/tex] - mass of  gold = 75. 0 g

[tex]c[/tex] - specific heat of gold = 0. 13 J/g°C

[tex]\Delta T[/tex]- temperature difference =  150°C -  250°C = 100°C

Put the values in the formula,

[tex]Q = 75\times 0.13 \times 100 }\\\\Q = 975 {\rm \ J}[/tex]

Therefore, 975 J of heat energy is needed to increase the temperature of given mass of gold.

To know more about specific heat formula,

https://brainly.com/question/1209542

The heat required to increase the temperature of the gold is 980 J

The correct answer to the question is Option B. 980 J

We'll begin by calculating the change in the temperature of the gold

ΔT = T₂ – T₁

ΔT = 250 – 150

ΔT = 100 °C

Finally, we shall determine the heat required.

Q = MCΔT

Q = 75 × 0.13 × 100

Q = 975 J

Q ≈ 980 J

The correct answer to the question is Option B. 980 J

Learn more about heat transfer:

https://brainly.com/question/10854640

Answer:

c. the red and green ball will hit the ground at the same time

Explanation:

if two objects are the same size but one is heavier, the heavier one has greater density than the lighter object. Therefore, when both objects are dropped from the same height and at the same time, the heavier object should hit the ground before the lighter one.

Hi there!

We can use the work-energy theorem to solve.

Recall that:

[tex]\large\boxed{W = \Delta KE = \frac{1}{2}mv_f^2 - \frac{1}{2}mv_i^2}[/tex]

The initial kinetic energy is 0 J because the crate begins from rest, so we can plug in the given values for mass and final velocity:

[tex]W = \frac{1}{2}(50)(5.61^2) = 786.8025 J[/tex]

Now, we can define work:

[tex]\large\boxed{W = Fdcos\theta}}[/tex]

Now, plug in the values:

[tex]786.8025 = Fdcos\theta\\\\786.8025 = (375)(3.07)cos\theta[/tex]

Solve for theta:

[tex]cos\theta = .6834\\\theta = cos^{-1}(.6834) = \boxed{46.887^o}[/tex]

Answer:

Because of the frictional force, the net force will oppose direction of the block and be directed towards the left even tho the spring exerts no force at this point

Answer:

Explanation:

The kinetic energy of an object can be found by using the formula

[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]

m is the mass

v is the velocity

Since we're finding the velocity we make v the subject

That's

[tex]v = \sqrt{ \frac{2k}{m} } \\ [/tex]

From the question

k = 5 J

m = 0.1 kg

We have

[tex]v = \sqrt{ \frac{2 \times 5}{0.1} } = \sqrt{ \frac{10}{0.1} } = \sqrt{100} \\ = 10[/tex]

We have the final answer as

Hope this helps you

Answer:

all of the particles are at rest (v = 0)

Explanation:

Therefore, since nothing is moving, the total momentum of the system must also be zero.

As a system consisting of two particles is known to have zero total momentum, the kinetic energy of the system will be zero as well.

Momentum is the product of a particle's mass and velocity. Momentum is a vector quantity, which means it has a magnitude as well as a direction.

According to Isaac Newton's second law of motion, the time rate of change of momentum equals the force acting on the particle.

Momentum describes the relationship between an object's mass, velocity, and direction.

Any change in momentum generates force. As a result, a change in momentum is used to calculate the force acting on the object.

Because the total kinetic energy is zero, all of the particles are at rest (v = 0). As a result, because nothing is moving, the system's total momentum must also be zero.

Thus, the statement is true.

For more details regarding momentum, visit:

https://brainly.com/question/24030570

#SPJ2

By using Lami's theorem, Mass m = 1.75 kg approximately

Given that a strong weightless rope has a mass, m, hanging from the middle of it. If the tension force on each rope is 25 N, and the rope droops at an angle of 20.0 degrees to the horizontal.

By using Lami's theorem, we can get how much mass is hanging from the rope.

Let the angle between the rope = α = 180 - 40

α = 140 degrees

The angle between one of the rope and mass = β = 20 + 90

β = 110 degrees

The angle between the mass and the other rope = γ = 360 - (140 + 110)

γ = 360 - 250

γ = 110 degrees

W/ sinα = T/ sinβ = T/sinγ

W/ sinα = T/ sinβ

Substitute all the necessary parameters

W/sin140 = 25/sin 110

W / 0.643 = 25 / 0.939

W = 17.1 N

Weight W = mg

17.1 = 9.8m

mass m = 17.1/9.8

Mass m = 1.7455 kg

Mass m = 1.75 kg approximately

Therefore, 1.75 kg mass is hanging from the rope.

Learn more about resolution of forces here: https://brainly.com/question/1858958

Answer:

Hey mate....

Explanation:

This is ur answer.....

There are 2 definitions :-

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

Explanation:

Use mathematical representations to describe a simple model for waves that includes how the amplitude of a wave is related to the energy in a wave. Patterns can be used to identify cause and effect relationships.

Answer:

For a dry-cell battery to operate, oxidation will occur from the zinc anode and reduction will take place in the cathode. The most common type of cathode is a carbon graphite. Once reactants have been turned into products, the dry-cell battery will work to produce electricity.

Explanation:

The battery operates through electrochemical reactions called oxidation and reduction. These reactions involve the exchange of electrons between chemical species. If a chemical species loses one or more electrons, this is called oxidation. The opposite process, the gain of electrons, is called reduction.

The value of the spring constant of the spring is 14.7 N/m.

The given parameters;

The extension of the spring is calculated as follows;

[tex]\Delta x = L_1 - L_0\\\\\Delta x = 12 \ cm - \ 10 \ cm\\\\\Delta x = 2 \ cm = 0.02 \ m[/tex]

The value of the spring constant of the spring is calculated by applying Hooke's law;

[tex]F = mg = k\Delta x\\\\k = \frac{mg}{\Delta x } \\\\k = \frac{0.03 \times 9.8}{0.02} \\\\k = 14.7 \ N/m[/tex]

Learn more about Hooke's law here:https://brainly.com/question/4404276

Answer:

It can be measure by grams

Answer:

Explanation:

Volume = Length x width x height

Multiply the length, width and, height to get the volume of the question.

From Newton's second law of motion, the acceleration of the crate is 0.84m/[tex]s^{2}[/tex]

Given that a 25 kg crate is pushed horizontally with a force of 70N and the coefficient of friction is 0.20

To calculate the acceleration of the crate, We will consider the net force acting on the crate. The net force will be sum of the applied force F and the frictional force [tex]F_{r}[/tex].

Let us first calculate the frictional force [tex]F_{r}[/tex]. That is,

[tex]F_{r}[/tex] =- μN

[tex]F_{r}[/tex] = μmg

[tex]F_{r}[/tex] = 0.2 x 25 x 9.8

[tex]F_{r}[/tex] = 49N

Using Newton's second law,

F = ma

F - [tex]F_{r}[/tex] = ma

70 - 49 =  25 a

21 = 25a

a = 21 / 25

a = 0.84 m/[tex]s^{2}[/tex]

Therefore, the acceleration of the crate is 0.84m/[tex]s^{2}[/tex]

Learn more here: https://brainly.com/question/1141170