An elemen belongs to group 17 of the periodic table. This element is most likely a.

Answers

Answer 1

Answer:

halogen

Explanation:

group 17 contains halogens

Answer 2

Answer:

The group 17 falls int he halogen category the element most likely Fluorine Chlorine Bromine Tennessine

Explanation:


Related Questions


When a scientific theory has been tested and proved by the scientific community, it becomes a law.

True
False

Answers

Answer:

False

Explanation:

Because laws and theories are developed for different purposes, laws never become theories, and theories do not become laws.

Webb has calculated the percent composition of a compound. How can he check his result?

Answers

Webb has calculated the percent composition of a compound. He can check his result by adding them to see if they equal up to 100. Why? Well, percent composition tells the quantity of elements with 100 as a base of total amount. This means that it will have to add to 100 to check the result. You would add up all of the values of percent composition of elements to see if they equal 100, and if they do, the results are accurate.

Your final answer: Webb can check his result by seeing if they add up to 100, considering that is the base total quantity.

After balancing the chemical equation what are the coefficients for these compounds

Answers

The cofficient of the [tex]\rm H_2S,HNO_3,NO,H_2O,S[/tex] willl be 3,2,2,4 and 3 respectively.

What is a chemical reaction?

One or more compounds, known as reactants, are transformed into one or more distinct substances, known as products. Such a process is known as a chemical reaction.

The overall reaction is found as;

[tex]\rm H_2S +HNO_3 \rightarrow S+NO+H_2O[/tex]

Reduction reaction;

[tex]\rm N^{+5} + 3e^{-1} \rightarrow N^{+2}[/tex]

The oxidation half-reaction from the overall reaction is;

[tex]\rm S^{-2} = S+ 2e^{-1}[/tex]

Multiply the oxidation reaction by 2 and the reduction reaction by 3 and add them.

[tex]\rm 2 N^{+5}+6e^{-1}+3S^{-2} \rightarrow 2N^{+2}+3S+H_2O \\\\ 2N^{+5}+3 S^{-2}\rightarrow 2N^{+2}+3S \\\\ 3H_2S +2HNO_3 \rightarrow 3 S + 2NO + 4H_2O[/tex]

The cofficient of the [tex]\rm H_2S,HNO_3,NO,H_2O,S[/tex] willl be 3,2,2,4 and 3 respectively.

To learn more about the chemical reaction refer to the link;

https://brainly.com/question/22817140

#SPJ1

You examine an ice core sample from 10,000 years ago when global temperatures were unusually high. Based upon past studies and insights from current GHG levels, we expect that atmospheric levels of carbon dioxide Group of answer choices were high but methane levels were low. and methane were unusually low. and methane were unusually high. were low but methane levels were high.

Answers

Methane was unusually high is the correct option. Hence, option B is correct.

What is methane?

Methane is the simplest member of the paraffin series of hydrocarbons and is among the most potent greenhouse gases. Its chemical formula is [tex]CH_4[/tex].

As the ice compacts over some time, tiny bubbles of the atmosphere or surroundings including greenhouse gases like carbon dioxide and methane—press inside the ice. These air pocket “fossils” give samples of what the atmosphere was kind when that layer of ice formed.

Based upon past studies and insights from current GHG levels, we assume that atmospheric levels of carbon dioxide and methane were unusually low.

Learn more about methane here:

https://brainly.com/question/2127750

#SPJ1

Which component or condition of a reaction affects the rate of the reaction but is not consumed during the course of the reaction?.

Answers

Answer:

A catalyst is a substance that can be added to a reaction to increase the reaction rate without getting consumed in the process.

Explanation:

Answer:

Catalyst

Explanation:

The pressure of Cl2 gas in a 2.0-L cylinder is 300. kPa at 25°C. What is the pressure (in kPa) when this gas is released into a 100-L chamber at 25°C? ______ kPa

Answers

The Final Pressure of the gas is 6 kPa

What is Boyle's Law ?

At constant Temperature , the absolute pressure exerted by the gas is inversely proportional to the volume of the gas.

[tex]\rm P_1V_1 = P_2V_2[/tex]

It is given that

[tex]\rm P_1 = 300k.Pa\\T_1 = 25 \; Degree\\V_1 = 2L\\V_2 = 100L\\T_2 = 25 Degree\\P_2 = ?[/tex]

To determine Final Pressure , Boyle's Law will be applied

300 * 2 = P₂ * 100

P₂ = 300 * 2 / 100

P₂ =6 kPa

Therefore the Final Pressure of the gas is 6 kPa.

To know more about Boyle's Law

https://brainly.com/question/1437490

#SPJ1

8.0 mol AgNO3 reacts with 5.0 mol Zn in
a single replacement reaction.
2AgNO3 + Zn → 2Ag + Zn(NO3)2
How many moles of Ag form from 8.0
mol AgNO3?
[?] mol Ag
Round your answer to the tenths place.

Answers

Taking into account the reaction stoichiometry, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

Reaction stoichiometry

In first place, the balanced reaction is:

2 AgNO₃ + Zn → 2 Ag + Zn(NO₃)₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

AgNO₃: 2 moles Zn: 1 mole Ag: 2 moles Zn(NO₃)₂: 1 mole

Limiting reagent

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

Limiting reagent in this case

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Zn reacts with 2 moles of AgNO₃, 5 moles of Zn reacts with how many moles of AgNO₃?

[tex]amount of moles of AgNO_{3}= \frac{5 moles of Znx2 moles of AgNO_{3}}{1 mole of Zn}[/tex]

amount of moles of AgNO₃= 10 moles

But 10 moles of AgNO₃ are not available, 8 moles are available. Since you have less moles than you need to react with 5 moles of Zn, AgNO₃ will be the limiting reagent.

Moles of Ag formed

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 2 moles of AgNO₃ form 2 moles of Ag, 8 moles of AgNO₃ form how many moles of Ag?

[tex]amount of moles of Ag=\frac{8 moles of AgNO_{3}x2 moles of Ag }{2 moles of AgNO_{3}}[/tex]

amount of moles of Ag= 8 moles

Then, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Which two types of waves can transmit energy through a vacuum?

Answers

Answer:

electromagnetic waves and mechanical waves

Explanation:

I think these two kinds of waves can transmit energy through a vaccume.

Hope I helped!

Electromagnetic waves.

Gravity waves.

how to minimize the harmful effects of power station on our environment​

Answers

Burning low-sulfur-content coal to reduce SO2 emissions. Some coal-fired power plants cofire wood chips with coal to reduce SO2 emissions. Pretreating and processing coal can also reduce the level of undesirable compounds in combustion gases.

How much sodium bicarbonate to raise alkalinity in pool.

Answers

Answer:

A rule of thumb is that 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH is tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.

45.8 grams of copper requires 1172 J of heat to reach a final temperature of 100.5 ℃. What was the initial temperature? Specific heat of copper is 0.385 J/g℃.
A. 66.5[?][?][?]
B. 122[?][?][?]
C. 34.0[?][?][?]
D. 75.2[?][?][?]

I also have no idea what the [?][?][?] is. Can someone please help me for 20 points? I desperately need help. No nonsense answers either, and show the steps pls. :')

Answers

Answer:

Option A, 66.5

Explanation:

use q (heat) = m(mass) * cp(specific heat) * deltat (change in temp)

q= 1172, m = 45.8, cp = 0.385

1172= (45.8) * (0.385) * Delta T

1172= 17.633 *DeltaT

1172/17.633 =DeltaT

66.5 =DeltaT

Why do you need to combust benzoic acid before testing the "unknown" sample you are interested in? Why do you need to combust more than one sample of the "unknown" you are testing?

Answers

Various samples of the must be combusted in other to obtain a reliable result.

What is a bomb calorimeter?

The bomb calorimeter is used to obtain the energy of a sample. This is called the energy equivalent or the energy value of the sample.

Now, we know that the bomb calorimeter is calibrated by the use of benzoic acid hence it must be combusted first to obtain the basic energy value of the calorimeter.

Various samples of the must be combusted in other to obtain a reliable result.

Learn more about bomb calorimeter:https://brainly.com/question/24245395?

#SPJ1

A sample of a gas at room temperature occupies a volume of 24.0 L at a pressure of 602 torr . If the pressure changes to 3010 torr , with no change in the temperature or moles of gas, what is the new volume, V2

Answers

Answer:

V₂ = 4.80 L

Explanation:

Because you are dealing solely with pressure and volume, you can find the new volume using the Boyle's Law equation. The general equation looks like this:

P₁V₁ = P₂V₂

In this form, "P₁" and "V₁" represent the initial pressure and volume. "P₂" and "V₂" represent the new pressure and volume. You have been given all of the variables but V₂. Therefore, by plugging these values into the equation, you can simplify to find your answer.

P₁ = 602 torr              V₁ = 24.0 L

P₂ = 3010 torr            V₂ = ?

P₁V₁ = P₂V₂                                               <---- Boyle's Law equation

(602 torr)(24.0L) = (3010 torr)V₂             <---- Plug variables into equation

144448 = (3010 torr)V₂                            <---- Multiply 602 and 24.0

4.80 = V₂                                                 <---- Divide both sides by 3010

Reduction of 9-fluorenone: objective of this lab was to reduce 9-fluorenone (a ketone), to 9-fluorenol (an alcohol) using sodium borohydride as the reducing agent. experimental data: 9-fluorenone: mw 180.20 g/mol mass used 0.6 grams methanol: mw 32.04 g/mol volume used: 6ml density: 0.792 nabh4: mw 37.83 g/mol mass used 0.05 grams 9-fluorenol: mw 182.22 g/mol balanced equation for the reaction is: 4c13h8o nabh4 4ch3oh --> 4c13h10o nab(och3)4 calculate the potential yield (in grams) of 9-fluorenol for 9-fluorenone, methanol and nabh4. from these potential yields identify the limiting reagent and theoretical yield.

Answers

9-fluorenone is a limiting reagent and theoretical yield.

What is 9-fluorenol?

Fluoren-9-ol is a member of the class of hydroxyfluorenes that is 9H-fluorene substituted by a hydroxy group at position 9.

Inspect stoichiometry of the given reaction as per the balanced equation below:

[tex]4C_{13}H_8O + NaBH_4 + 4CH_3 OH[/tex] → [tex]4C _{13} H _{10} O + NaB(OCH_3 )_4[/tex]

Given weight:

0.6 grams methanol

0.05 grams 9-fluorenol

0.792 [tex]NaBH_4[/tex]

Out of the three reactants, [tex]NaBH_4[/tex] acts as a reducing agent only and hence the reaction can occur only when [tex]NaBH_4[/tex] is present in relatively much smaller amounts. But the yield of the product,9-fluorenol, is not governed by its quantity.

Theoretically, when equimolar amounts of reactants ( 9-fluorenone and methanol ) are taken for reaction in presence of [tex]NaBH_4[/tex] an equivalent quantity of product, 9- fluorine is obtained, as inspected in the above stoichiometric relations. But practically we have used a lesser number of moles of 9-fluorenone than theoretically needed, hence in this case it should serve as the limiting reagent.

9- fluorenone, methanol & [tex]NaBH_4[/tex] are the reactants, while the product 9-fluorenol would be obtained = 0.0033 moles

This would represent the theoretical yield of the product 9-fluorenone, as we have used an excess of methanol thus facilitating the reaction to go to completion.

Hence, 9-fluorenone is a limiting reagent.

Learn more about the 9-fluorenol here:

https://brainly.com/question/6798923

#SPJ1

Instructions: In this virtual lab, you will use a virtual spectrometer to analyze astronomical bodies in space. Record your hypothesis and spectrometric results in the lab report below. You will submit your completed report to your instructor.

Answers

The main function of using a virtual spectrometer in order to analyze astronomical bodies in space is to find the chemical composition of planets and stars.

What is a Virtual Spectrometer?

This refers to the instrument that is used to observe the color separation of light in a controlled experiment.

Hence, we can see that another reason for the use of a virtual spectrometer to make an analysis of astronomical bodies is to indicate the speed and direction of a star or galaxy as it spreads incoming beams of light into different spectrums.

Read more about virtual spectrometers here:

https://brainly.com/question/21578855

#SPJ1

Question 3
Not yet
answered
Points out of
If you dissolve 2.70 g of NaCl in 425 mL of water, what is the molarity of the
solution? (Report your answer to three places past the decimal point. Moodle is
looking for a number only, no units.)

Answers

Answer: 0.118M

Explanation:

The formula for molarity is: [tex]M=\frac{mol solute}{L solution}[/tex]

First, we need to find the number of moles of NaCl.

[tex]2.70gNaCl*\frac{1molNaCl}{58.44gNaCl} =0.05molNaCl[/tex]

Next, we must convert millimeters to liters. We can do that by dividing the number of mL by 1000.

[tex]\frac{425mL}{1000} =0.425L[/tex]

Now we have our needed data! All we need to do now is plug in our data to the molarity formula.

[tex]M=\frac{0.05mol}{0.425L} =0.118M[/tex]

I hope this helps! Pls mark brainliest!! :)

Why did potato chunks a, b, and c gain mass here?

Answers

The most likely reason why the potato chunks gained mass is that water entered the potato cells.

How does water enter potato cells?

The process of Osmosis allows water to pass through the semi-permeable membrane of potato cells.

This happens when the potato cells have less water than the material around them which then leads to water entering the cells to balance the water concentration.

The potato cells will expand and have more mass as a result.

Find out more on osmosis at https://brainly.com/question/2625460.

#SPJ12

What is the lowest energy level that contains d orbitals.

Answers

Answer:

3

Explanation

it is 3

Assertion (A): Naphthalene balls disappear with time without leaving any solid.
Reason (R): Solid converted to liquid is called sublimation.

a) Both A and R are true and R is the correct
explanation of A.
b) Both A and R are true but R is not the
correct explanation of A.
c) A is true but R is false. d) A is false but R is true.

Answers

Explanation:

a) Both A and R are true and R is the correct

explanation of A.

Answer:

[tex]\fbox {c) A is true but R is false.}[/tex]

Explanation:

Assertion (A):

⇒ Naphthalene balls disappear with time without leaving any solid.

True √

Reason (R):

⇒ Solid converted to liquid is called sublimation.

False ×

⇒ Solid converted to liquid is called melting

What volume of a 4.13 M lithium
nitrate solution would be needed tomake 195 mL of a 1.05 M solution
by dilution?

[?] L LINO3

I’ll give u 100 points if ur answer is correct

Answers

Answer:

0.0496

Explanation:

Well, there’s none!!! It’s just so easy…

Answer: 49.6

Explanation: It actually wants the answer it mL not L.

Which of the following best describes a mixture? A. A substance that results when another substance is separated into its component parts B. A substance composed of two or more elements chemically combined C. A substance that results when two or more substances combine physically but not chemically D. A particle consisting of two or more atoms chemically combined​

Answers

Answer: C. A substance that results when two or more substances combine physically but not chemically

what happens when you mix an element into a solution with lesser reaction?

Answers

When an element is placed into a solution with lesser reaction, the reaction rate will be slow.

What is rate of a reaction?

The rate of a reaction is the rate which reactants molecules are converted or the products molecules are formed.

The rate of a reaction increases with increase in concentration of the reactants and decreases with decrease in concentration.

Therefore, when an element such as a metal is placed in solution of low concentration such as very dilute acid, the reaction rate will be slow.

Learn more about rate of reaction at: https://brainly.com/question/24795637

#SPJ12

What is the molar concentration of
a solution with a volume of 1.5 L
containing 660 g Ca3(PO4)2?

Answers

Answer:

1.42 M

Explanation:

First calculate the amount of moles.

that's done by dividing the mass with the molecular mass so 660g / 310.18 g/mol = 2.13 mol

Then you can calculate the molarity by dividing the moles with the volume so 2.13 mol / 1.5 l = 1.42 M

(without rounding: 1.418531175 M)

Answer:

1.42 M

Explanation:

Acellus

the company calculated that they would produce 4.8 tonnes of magnesium but only 3.2 tonnes was produced calculate the percentage yield

Answers

To find the percentage yield you must take the actual yield and divide it by the theoretical yield and times it by 100. (Percent yield=Actual/Theoretical * 100)
For this example the calculated (Theoretical value) was 4.8 tones and the tones produced (Actual value) was 3.2 tones.
So 3.2/4.8 *100 = 66.6666666….
(Round how your teacher wants you too)

Which of the following is the best definition of a chemical change?
A. A change in a substance where one or more new substances form
B. A change in a substance where no new substance forms
C. A change in a substance where energy is conserved
OD. A change in a substance where a phase change occurs

Answers

Answer:A is correct

Explanation:

10.5 mL of an unknown solution are diluted to 80.0 mL. The concentration of the
new solution was determined to be 0.172 M. What was the molarity of the
unknown solution? (Report your answer to two places past the decimal point.
Moodle is looking for a number only, no units.)

Answers

Taking into account the definition of dilution, the molarity of the unknown solution is 0.133 M.

Dilution

Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volume

Initial concentration

In this case, you know:

Ci= ?Vi= 10.5 mLCf= 0.172 MVf= 80 mL

Replacing in the definition of dilution:

Ci× 10.5 mL= 0.172 M× 80 mL

Solving:

Ci= (0.172 M× 80 mL)÷ 10.5 M

Ci= 0.133 M

In summary, the molarity of the unknown solution is 0.133 M.

Learn more about dilution:

brainly.com/question/6692004

brainly.com/question/16343005

brainly.com/question/24709069

#SPJ1

You mass two substances. One substance has a mass of 22.45 g and the other has a mass of 3.1 g. What is the total mass of both objects?

Answers

Answer:

25.55 g

Explanation:

To find the total mass of both objects, you need to add the masses together.

22.45 g + 3.1 g = 25.55 g

In correct significant figures (2 sig figs to match 3.1 g), the value would be 26 g.

Answer:

answer = 25.55

Explanation:

You just have to add the mass of the two objects

1s22s²2p63s23p64s²3d104p5
Which element is this?

Answers

Answer: bromine

Explanation:

There are a total of 2+2+6+2+6+2+10+5=35 electrons, meaning there are 35 protons. The element with atomic number 35 is bromine

I will give a brainley Hi guys I need help figuring out where the moderately reactive atoms are located on the periodic table and how the number of balance electrons of the light metals compared to those heavier than born

Answers

The moderately reactive atoms located in the periodic table are fluorine, chlorine, bromine, and iodine which means the halogens family.

The number of balance electrons of the light metals compared to those heavier by listing elements in the order of increasing atomic number.

What are halogen metals?

They are the five non-metals in family 7A of the periodic table. Halogens are chemical elements that form inorganic salts. In the periodic table they are part of group 17 or family 7A.

Halogens are strong oxidants and react mainly with alkali metals (Family I A) which tend to donate an electron. They also react with metals and noble gases (Family VIII A).

The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number, or the number of protons in an atom's nucleus, which generally coincides with increasing atomic mass.

See more about halogens at:

brainly.com/question/11156152

#SPJ1

[tex]\begin{gathered}\\ \underline{\boxed{\large\leadsto\frak \red{ Answer :- }}} \\ \end{gathered}[/tex]

The moderately reactive atoms located in the periodic table are fluorine, chlorine, bromine, and iodine which means the halogens family.

The number of balance electrons of the light metals compared to those heavier by listing elements in the order of increasing atomic number.

What are halogen metals?

They are the five non-metals in family 7A of the periodic table. Halogens are chemical elements that form inorganic salts. In the periodic table they are part of group 17 or family 7A.

Halogens are strong oxidants and react mainly with alkali metals (Family I A) which tend to donate an electron. They also react with metals and noble gases (Family VIII A).

The chemical elements are arranged from left to right and top to bottom in order of increasing atomic number, or the number of protons in an atom's nucleus, which generally coincides with increasing atomic mass.

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

What volume of a 3.95 M
potassium chloride solution would
be needed to make 325 mL of a
2.76 M solution by dilution?
[?] mL of 3.95 M KCl

Answers

0.227L is the volume of a 3.95 M potassium chloride solution that would be needed to make 325 mL of a 2.76 M solution by dilution.

What are moles?

A mole is defined as 6.02214076 × 10^{23} of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Moles of KCl in new solution

0.325dm³ x (2.76mol/dm³)

= 0.897mol.

Hence volume needed

0.897mol ÷(3.95mol/dm³)

= 0.227dm³ or 0.227L.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

Other Questions
Explain how to graph a scatterplot and its regression line using a regression calculator Define Relative clouse and subject verb agreementWhith examples Barbara buys a box of pens for $4. For every additional box she buys, she gets a $1 discount. Which expression represents the total cost of the -pens, c, as a function of the number of boxes, b? The product of 10 and a number is less than 5. What is the mathematical expression of the given statement. Read the passage from Animal Farm.Presently the tumult died down. The four pigs waited,trembling, with guilt written on every line of theircountenances. Napoleon now called upon them toconfess their crimes. They were the same four pigs ashad protested when Napoleon abolished the SundayMeetings. Without any further prompting theyconfessed that they had been secretly in touch withSnowball ever since his expulsion, that they hadcollaborated with him in destroying the windmill, andthat they had entered into an agreement with him tohand over Animal Farm to Mr. Frederick. They addedthat Snowball had privately admitted to them that hehad been Jones's secret agent for years past. Whenthey had finished their confession, the dogs promptlytore their throats out, and in a terrible voice Napoleondemanded whether any other animal had anything toconfess.Mark this and returnHow does Napoleon's questioning of the pigsdemonstrate the author's purpose of reflecting reality?It shows similarities with Stalin's Great Purge andreveals how dictators use fear to control people.OIt shows how some animals are capable of usingnonviolent tactics to gain power over others.It shows how leaders blame others for the problemsof the society they lead and punish them accordingly.It shows how both Napoleon and Stalin usedpromises of a better life to take control of a group. The tsar lost control of his soldiers during the february revolution and could not enforce his role so he was forced to HELP ME PLEASE!!!!! FIND Y! Translate the following verbal statement into an algebraic equation and then solve: Use x for your variable. The difference of four times a number and seven is ten times the number. The receptor cells for vision are located in the _____ and are called _____ and _____ (-7x^2+3)-(-4x-3)(7x 2 +3)(4x3) Help I need this today before 12:50pm Theo is grounded by his parents for getting bad grades at school. After the first week of being grounded, Theo brought home his new report card with all these. To encourage Theo to get more As, his parents ended his being grounded a week earlier than they had originally stated. Is the punishment by application or by removal? Which forms as a result of compressional stress?anticline and synclinenormal faultstrike-slip faultfault-block mountain Compare and contrast the three valley civilization. How were they similar and different? Think about geography, culture, and economics. Arrange the following events that occurred during the French and Indian War in chronological order.the British gain control of St. Lawrence Riverthe Battle of Monongahela Riverthe battle for the city of Quebecthe siege of Fort William Henry Muscle Strengthening GuideFor this activity, you will be creating a visual guide for improving muscle strength. You can create this guide on a large piece of paper, a poster, or by using a Power Point type program. Imagine that your guide will be displayed in gyms, personal trainer's offices, physical therapy facilities, and even doctor's offices. Your guide can be formatted like a pamphlet or created as a poster. Whatever design style you choose, it should clearly identify various musclegroups and offer specific exercises that can help strengthen these muscles.The requirements for your muscle strengthening guide are as follows: A relevant title for your guide. Clearly identify at least eight different muscles or muscle groups. Include the name of the muscle or muscle group as well as a visual (hand-drawing, computer generated graphic,or online photo) for where it is located in the body. Clearly identify at least one exercise to strengthen each muscle or muscle group. Include step-by-step instructions for performing this exercise. Include a visual representation for each exercise - this can be hand drawn, created on thecomputer, or found online.You dont have to do the last one, I just need the first three. Please. The _____ characteristic of an intelligent agent demonstrates its ability to learn from previous knowledge and go beyond information given previously y = x + 4 y = 3x + 3 You buy 2 shirts and 1 pair of pants for $34. Your friend buys 3 shirts and 3 pairs of pants for $69. What is the price of 1 shirt and 1 pair of pants Tay-Sachs disease is the result of a genetic defect in the metabolism of: