To ensure that all memory addresses can be consistently written to and read from, run a memory test.
The BSOD is a warning that appears on the blue screen when your computer experiences an interruption and displays this warning. It is formally known as a "Stop mistake." The notification alerts you to a serious problem that is causing Windows to restart. If there is a problem that results in an unexpected shutdown or restart of your device, a blue screen error, also known as a stop error, may occur. Your device may display a blue screen with the notification that it needs to restart because of a problem. Keep in mind that the Blue Screen of system can harm your computer in addition to being inconvenient. This is in order to heal.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
When a system has several control-sensing and response requirements, which is best to use?
A. Electric control
B. Pneumatic control
C. Modulating control
D. Electronic control
Answer:
A. Electric Control
Explanation:
A. Electric Control
Two 2.30 cm x 2.30 cm plates that form a parallel-plate capacitor are charged to ±0.708 nC.(a) What is the electric field strength inside the capacitor if the spacing between the plates is 1.30 mm?(b) What is the potential difference across the capacitor if the spacing between the plates is 1.30 mm?(c) What is the electric field strength inside the capacitor if the spacing between the plates is 2.60 mm?(d) What is the potential difference across the capacitor if the spacing between the plates is 2.60 mm?
If there is a 1.30 mm gap between the plates, total electric field strength from the inside of the capacitor is E = 1.512 * 105 V. The electric potential across the capacitor, the distance between the plates, is V = 302.4 V.
What exactly is a "electric field"?Each position in space has an electric field attached with it when there is charge involved in any form. Electric field strength (E), also known as the electric field magnitude and direction, is stated as a value.
What is an example of an electric field?The area of space surrounding a static electricity particle or object that is where the charge body perceives force is known as the electrostatic potential. Examples: -Charges and their arrangements, such as filters and rechargeable battery, produce electric fields.
parallel plate capacitors,
A= 2.30×2.30=5.29 cm²
=5.29×10⁻⁴ m²
capacitor, Qc = ±0.708nC
= ±0.708×10⁻⁹
electric field strength, E
distance, =1.00 mm
=10⁻³ m
E = Q/(ϵ_o A)
E = 0.708×10⁻⁹/(8.85×10⁻²×5.29×10⁻⁴
= 1.512×10⁵ N/C
Potential difference,
d = 2×10⁻³ m
V = Ed
= 1.512×10⁵×2×10⁻³
= 302.4 V
To know more about electric field visit:
https://brainly.com/question/8971780
#SPJ4
14. Which of the following statements correctly defines balance point temperature?
A. The inside temperature at which cooling is required
B. The outside temperature at which point ventilation isn't required
C. The outside temperature at which point heat loss from the building equals internal heat gain
D. The inside temperature at which point backup heat comes on
Answer:
C. The outside temperature at which point heat loss from the building equals internal heat gain
Explanation:
The balance point temperature (also known as "balance temperature" or "neutral temperature") is the outside temperature at which the heat loss from a building equals the internal heat gain. At this point, no heating or cooling is required to maintain a comfortable indoor temperature. The balance point temperature is used in building design and HVAC system design to determine the appropriate size and type of heating and cooling equipment needed for a building.
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over?
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over 150 volts between conductors.
What is circuit?A circuit in electronics is a closed path that enables the movement of electricity from one point to another. A gap or break in the circuit does not obstruct the flow of current, even though it may contain a variety of electrical components like transistors, resistors, and capacitors.
A basic circuit is something like a flashlight. Because the circuit is not closed when the switch is off, no electricity will flow from the batteries to the flashlight's bulb. A piece of metal inside the flashlight physically closes the circuit gap when you turn the switch to the on position. The bulb then illuminates as a result of the batteries' electrical flow.
Learn more about circuit
https://brainly.com/question/21505732
#SPJ4
Which battery cable is bolted to the vehicle frame to allow the metal structure of the vehicle to serve as a large conductor to carry current?
Answer:
The Negative battery cable is used to bolt the vehicle frame to allow the metal structure of the vehicle to serve as a large conductor to carry current.
Explanation:
Battery cable is large automotive cable. Like smaller types of automotive wire, it is available in PVC and cross-linked forms. Click here to read an earlier post explaining the differences between PVC and cross-linked wire insulation.
One type of PVC battery cable is SGT cable. It is rated to 80°C and therefore can be used in starters or battery grounds. Cross-linked battery cables can also be used in starter and battery ground applications, and they are more resistant to heat, abrasion, and aging than PVC cable.
Two types of cross-linked battery cable are SGX and STX. They are rated to 125°C. Of the three types of battery cable (SGT, SGX, amd STX), STX has the thinnest wall, making it a popular choice for automotive applications with limited space.
To learn more about this visit the link:
https://brainly.com/question/26923743
https://brainly.com/question/29354736
Match each type of access point on the left with the wireless network architecture where it is commonly used on the right. Each type of access point may be used once, more than once, or not at all.
Independent access point infrastructure/ Intelligent AP, Hub-and-spoke infrastructure/ Lightweight AP, Distributed wireless mesh infrastructure/ Intelligent AP.
A WLAN, or wireless local area network, is created by an access point, which is often found in a large building or workplace. An access point transmits a WiFi signal to a predetermined region after being connected to a wired router, switch, or hub through an Ethernet cable. It's true that it depends on the requirements. While medium to big businesses and organizations will undoubtedly need a network of access points and switches, homeowners and small businesses may find routers to be the best (if not the only) answer. Devices are connected wirelessly using wireless access points. They function by sending out a signal that various objects can connect to.
Learn more about access point here
https://brainly.com/question/29561877
#SPJ4
When the controller's output is set by a constant plus the error multiplied by the gain, you have
A. proportional
B. electrodynamic
C. modulating
D. floating
control.
Note that when the controller's output is set by a constant plus the error multiplied by the gain, you have "proportional Control" (Option A)
What is a proportional Control System?Proportional control is a type of control system in which the output of the controller is determined by a constant value (offset) plus the error multiplied by the gain.
The gain is a coefficient that defines how strongly the control system reacts to a mistake. This control is often employed in industrial processes and feedback control systems where precise control of a process variable is required. The controller's output is directly proportional to the error, thus the term proportional control.
Learn more about proportional control:
https://brainly.com/question/20164864
#SPJ1
The 25-kg bar has a center of mass at G. If it is supported by a smooth peg at C, a roller at A, and cord AB, determine the reactions at these supports.
A fixed support that is to a structure restricts all rotations and movements at that location.
There are six support responses applied from the fixed support to the structure since the joint with fixed support has no degrees of freedom. R (externally independent) (externally independent) Support for a There are three possible reactions at a engine. The term "ball and socket joint" is another name for the support. A built structure is often connected to its base using one of three basic types of connections: roller, pinned, and fixed. A simple support is a fourth form that is uncommon in building constructions. This is frequently as having no friction.
Learn more about engine here-
https://brainly.com/question/27162243
#SPJ4
1-14. (a) write the vo1 expression by inspection and solve for vo1 using a voltage divider. (b) write the vo2 expression by inspection and solve for vo2 using a voltage divider
I'm sorry, but the information supplied is insufficient for me to finish this task. The inquiry does not specify which circuit or values are being discussed. To solve for vo1 and vo2 using a voltage divider, I would need more information about the circuit, such as resistor values and input voltage. Could you possibly share additional details regarding the circuit in question?
how to use delaman tire air compressor, air compressor 12v portable mini air compressor electric tire inflator pump 12 volt car 300 psi
To use the Delaman Tire Air Compressor, Air Compressor 12V Portable Mini Air Compressor Electric Tire Inflator Pump 12 Volt Car 300 PSI, first plug the compressor into a 12-volt power source.
Check the pressure gauge on the compressor to make sure it is at the desired pressure setting. Attach the air hose of the compressor to the valve stem of the tire. Turn the air compressor on and wait until the tire is inflated to the desired pressure level. Turn the air compressor off and disconnect the air hose from the tire. Check the tire pressure with a tire pressure gauge to make sure it is at the correct pressure.
Learn more about Air Compressor:
https://brainly.com/question/13080807
#SPJ4
how to answer what have been your most significant experiences in stem (science, technology, engineering, and mathematics) and how will you use stem principles to improve the world?
By combining science, computing, engineering, and math, STEM enables us to address the problems that the world faces today.
How would you define engineering?Engineering is the use of math and science to the designing, testing, and construction of devices, structures, and procedures. A rewarding job can result from studying it. Problem-solving is at the heart of engineering.
Which nation has the best mechanical engineering sector?China, the States of America, German, and France have the largest need for mechanical engineers. Because they require them to design and construct machinery and other technology for their firms, these nations have a strong market for those in this field.
To know more about engineering visit:
https://brainly.com/question/14094488
#SPJ4
For the diagram below, assume fracking has not been used with the oil and gas well.The figure presents a diagram of 6 rock layers that contain oil and natural gas. Beginning at the bottom and moving upwards, the rock layers are as follows. Rock layer D is at the bottom, and rock layer C is directly above it. Oil is located in the upper portion of rock layer C, and natural gas, or C H 4, is located directly above the oil, still in rock layer C. Rock layer B is located directly above rock layer C, and it contains the same type of rock as layer D. Moving upward, the next two rock layers are unlabeled. Rock layer A lies at the top, and it contains the same type of rock as layers B and D. A well has been drilled down into the area of natural gas, or C H 4.Rock layer that can be porous but must have very low to no permeability
Rock layer that can be porous but must have very low to no permeability is Clay.
What is clay?In sedimentary rock, clay is a typical ingredient. The most typical of sedimentary rocks is shale, which is primarily formed from clay. Most clay deposits, though, are impure. Both clay and silt are present in numerous naturally occurring deposits. The size and mineralogy of clays are different from those of other fine-grained soils.
The size of the particles in silts, which are fine-grained soils devoid of clay minerals, is generally greater than that of clays. However, there is some overlapping with regard to particle size and other physical characteristics.
Each discipline has its own way of defining silt and clay. Since clays are finer than silts, geologists and soil scientists usually believe that separation occurs at a particle size of 2 m, while sedimentologists frequently use 4-5 m and colloid chemists use 1 m.
Learn more about clay
https://brainly.com/question/1023696
#SPJ4
what allows an arch bridge to span greater distances than a beam bridge, or a suspension bridge to stretch over a distance seven times that of an arch bridge
The answer rests in how each style of bridge handles compression and tension, two significant stresses.
At 17.61 kilograms, the arch bridge collapsed, followed by the truss at 11.23 kilograms and the suspension at 14.86 kilograms. The test's findings indicate that the experiment may be reproduced digitally and that the arch bridge design performs best in the particular conditions of this experiment. Because the voussoirs are forced together rather than apart by downward pressure, an arch is able to support a much heavier weight than a horizontal beam of the same size and material. The supports of the arch must withstand the ensuing outward thrust.
Learn more about stresses here-
https://brainly.com/question/30128830
#SPJ4
Please use the tables in the flights database. Your deliverable should include SQL queries that you write in support of your conclusion.
1) Which destination in the flights database is the furthest distance away, based on the information in the flights table. Show the SQL queries that support your conclusion.
2) What are the different numbers of engine in the planes table? For each number if engines, which aircraft have the most number of seats? Show SQL statements that support your result.
3) Show the total number of flights.
4)Show the total number of flights by airline (carrier)
5)Show all of the airlines , ordered by number of flights in descending order.
6)Show only the top 5 airlines , by number of flights, ordered by number of flights in descending order.
7)Show only the top 5 airlines, by number of flights of distance 1000 miles or greater, ordered by number of flights in desending order.
8)Create a question that (a) uses data from the flights database, and (b) requires aggregation to answer it, and write down both the question and the query to answer it.
We will focus on using SQL to create the database and table structures, mainly using SQL as a data definition language (DDL).
When you use SQL statements to create or modify the structure of a database SQL is being used as?The database tables will be updated, deleted, and selected using SQL as a data manipulation language (DML). According to clauses (such FROM and WHERE) that define criteria, a SQL SELECT statement pulls records from a database table.
Following is the syntax: SELECT column1, column2 FROM table1, table2 WHERE column2='value'; An advanced language for requesting, removing, and updating data from databases is called Structured Query Language (SQL). The de facto standard query language for databases is SQL, which is an ANSI and ISO standard.
Many well-known database products, including those from Oracle and Microsoft SQL Server, support SQL. It is extensively used in both business and academics, frequently for huge, complex datasets.
To learn more about database SQL refer to:
https://brainly.com/question/25694408
#SPJ1
dry air will break down if the electric field exceeds about 3.0×106v/m.What amount of charge can be placed on a capacitor if the area of each plate is 8.8 cm^2?
If the electric field surpasses 3.0106v/m, dry air will degrade. If a capacitor's plates have an area of 8.8 cm2 apiece, it can hold a charge of 23.364 nC.
The charge of the capacitor is
Q=CV
= (ε₀A/d)(Ed)
Q=ε₀EA
The amount of charge that can be placed on a capacitor is,
Q=ε₀EA
=(8.85×10⁻¹²Nm²/C²)(3×10⁶ V/m)(8.8×10⁻⁴ m²)
=23.364×10⁻⁹
= 23.364 nC
The electric field is mathematically defined as a vector field that can be associated with each point in space, representing the force per unit charge exerted on a positive test charge at rest at that point.
The electric charge or time-varying magnetic fields produce the electric field. The electric field is responsible for the attractive forces that hold the atomic nucleus and electrons together at the atomic scale.
Gauss' law states that the total electric flux out of a closed surface is equal to the charge enclosed divided by permittivity. Or, the total flux associated with a surface is one-tenth of the charge enclosed by the closed surface.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ4
Determine the head loss during backwash for a filter bed consisting of 0.6 m of sand with f = 0.45, 0.4 m gravel, and a pipe lateral under drain with a circular orifice having α = 0.8 and β = 0.05, Vb = 0.8 m/min.
The head loss during backwash for this filter bed is:
HL = (3.70ρVb2)/(2g[αf + β])
where ρ = density of the fluid (typically water), Vb = backwash velocity, g = acceleration due to gravity, α = orifice discharge coefficient, f = bed porosity, and β = orifice area ratio (orifice area / pipe lateral area).
For the given filter bed, the head loss is equal to:
HL = (3.70*1000*(0.8 m/min)^2)/(2*9.81*(0.8*0.45 + 0.05)) = 0.124m
The head loss during backwash is mostly due to friction loss as the water flows through the filter bed and friction loss is caused by the resistance to flow of the bed particles. The orifice is also a source of head loss due to the sudden expansion of the water from the pipe lateral to the orifice.
When using a front reference point to determine where the front of your vehicle is when perpendicular parking, the curb or line should be?
Bend your front wheels out from the curb when parking uphill at a curb. Bend your front wheels towards the direction of the curb when parking on an incline.
Bend your front wheels out from the curb when parking uphill at a curb. Bend your front wheels towards the direction of the curb when parking on an incline. The front wheels of your car should be pointed toward the curb while parking downhill without a curb. When traveling uphill (or downhill) without a curb, keep turning your front wheels to the right so that if you drive, your car will exit the highway rather than roll into oncoming traffic. Bend your front wheels out from the curb when parking uphill at a curb. Turn your front wheels in the direction of the curb when parking downward. You should point your front wheels into the curb while parking your car with the front facing downhill and a curb.
Learn more about Curb here:
https://brainly.com/question/2351755
#SPJ4
Collar A starts from rest at t 5 0 and moves downward with a constant acceleration of 7 in./s2. Collar B moves upward with a constant acceleration, and its initial velocity is 8 in./s. Knowing that collar B moves through 20 in. between t 5 0 and t 5 2 s, determine (a) the accelerations of collar B and block C, (b) the time at which the velocity of block C is zero, (c) the distance through which block C will have moved at that time.
Time t 0 sees Collar A start at rest and drop at a steady speed of 7 in/s2. Collar B rises with x = 727.5 millimeters constant.
What does the term "acceleration" mean in plain English?Acceleration is the change in speed that occurs quickly. Generally speaking, but not always, acceleration denotes a shift in speed. Even when an object travels in a circular path, its velocity axis is still moving, therefore it keeps gaining speed.
Calculation
a) aB = 240 mm/s² (↓)
aA = - 345 mm/s²
b) For the Block C
v₀ = 130 mm/s
For the Block A
v₀ = - 43.33 mm/s
c) Δx = 727.5 mm
a) For the Block B
v = v₀ + a*t
480 = 0 + a*(2)
aB = 240 mm/s² (↓)
Then we have
3*LA + 4*LB + LC = L
If we apply
d(3*LA + 4*LB + LC)/dt = dL/dt
3*vA + 4*vB + vC = 0
d(3*vA + 4*vB + vC)/dt = d(0)/dt
3*aA + 4*aB + aC = 0
aA = - (4*aB + aC) / 3
aA = - (4*240 mm/s² + 75 mm/s²) / 3
aA = - 345 mm/s²
b) For the Block C
v = v₀ + a*t
v₀ = v – a*t
v₀ = 280 – (75)(2) = 130 mm/s
For the Block A
When t = 2 s
vB = 480 mm/s
vC = 280 mm/s
we use the formula
3*vA + 4*vB + vC = 0
3*vA + 4*(480) + 280 = 0
vA = - 733.33 mm/s
Now, we can apply
v = v₀ + a*t
- 733.33 mm/s = v₀ + (- 345 mm/s2)(2 s)
v₀ = - 43.33 mm/s
c) We can use the equation
Δx = v₀*t + (1/2)*a*t²
Δx = 130*(3) + (1/2)(75)(3)²
Δx = 727.5 mm
To know more about acceleration visit:
https://brainly.com/question/14510119
#SPJ4
To pass a bicyclist traveling in the same direction on a two-lane road without bicycle lanes, you should:
To pass a bicyclist traveling in the same direction on a two-lane road without bicycle lanes, you should slow down and wait until there is no traffic approaching, then pass the bicyclist leaving him or her sufficient space.
What is bicycle lane?A bike lane is a section of the road that has been marked with pavement markings, signage, and striping specifically for the preferential or exclusive use of cyclists. With predictable behaviour and movements between cyclists and motorists, bike lanes allow cyclists to travel at their preferred speed without being hindered by the current traffic situation.
A bike lane differs from a cycle track in that it lacks any physical barriers (bollards, medians, raised curbs, etc.) that prevent motorised traffic from encroaching on it. When there is no parking, traditional bike lanes run along the curbside, next to parked cars on the right side of the street, or on the left side of the street in certain circumstances.
Learn more about bike lane
https://brainly.com/question/24238353
#SPJ4
n this installation each winding is using tap 5. assuming tap 5 has been selected to correct the incoming supply voltage, which tap choices left can correct for a future voltage increase on the feeder?
Each winding in this installation uses tap 5. To adjust the incoming supply voltage, tap 5 has been chosen. A future rise in feeder voltage can be compensated for by tapping 1 or 2 on the left.
What does voltage mean, exactly?Voltage is the term used to describe the "pressure" that applies to electricity. Voltage is expressed in voltages (V), and higher voltages cause an electrical device to receive more electricity.
What factors determine voltage?Connecting the measurement equipment to the network or element that has to be measured is the conventional approach for evaluating volts (the load). To measure the right power and avoid absorbing any radiation from the circuit being evaluated first, the measuring device must have an endless harmonic distortion (resistance).
To know more about voltage visit:
https://brainly.com/question/28517913
#SPJ4
A system of parallel, non-concurrent forces acting on a body can be reduced to which of the following:
A. One resultant force and one resultant moment acting at any point on the body
B. One resultant force acting at a specific point on the body
C. Both of the above
D. None of the above
A system of parallel, non-concurrent forces acting on a body can be reduced by One resultant force and one resultant moment acting at any point on the body and One resultant force acting at a specific point on the body. Thus, C. Both of the above is correct.
What is non-concurrent forces?Two or more forces that share a common line of action but have equal magnitudes but act in opposite directions are said to be non-concurrent forces. In plain English, this means that a system of forces is said to be non- concurrent when its components do not intersect at a single point. A concurrent force system, however, has a common point through which all forces pass.
Combined forces that don't add up to zero are considered non-concurrent forces. The fact that a couple's line of action does not intersect at one point makes them an example of a non-concurrent force. When it comes to mechanics, a couple is a system of forces with a resultant (net, or sum) moment but no resultant force.
Learn more about non-concurrent force
https://brainly.com/question/15103668
#SPJ4
You need to develop a report of maximum 1-2 pages containing the answers for the following questions. Answer both the questions given below. (90 marks) 1. Identify someone you know that works for a relatively large organization (e.g., a bank, insurance company, manufacturer, electric utility, etc.). Ask that person to identify an information system that is used by the organization to automate or support decision making. By interviewing your contact person (and possibly others within the organization, if appropriate), try to address the following issues:
Functional structure is most suitable when the size of the organization is large, has diversified activities, and operations require a high degree of specialization.
What Is an Information System?In order to give automation in decision-making or problem-solving, a decision support system is an information system that analyses business data and other information relevant to the firm. When difficulties arise while running the business, a management employs it.
Automated Information Systems (AIS) are computer-based collections of data and software that automate the management of operations and information by using the input of diverse resources. The result is meaningful output that can assist a business in making strategic decisions. T
he definition of an information system includes two viewpoints: one that focuses on its structure and the other that focuses on its function. An information system serves as a technologically enhanced medium for the goal of capturing, preserving, and spreading language expressions as well as for the supporting.
To learn more about Information System refer to:
https://brainly.com/question/14688347
#SPJ1
Approximately 12% of men have a type of colorblindness that prevents them from
distinguishing between red and green. If 3 men are selected at random, find the probability
that all of them will have this type of red-green colorblindness.
The probability that all 3 men have red-green colorblindness is 0.0017 or 0.17%
How to find the probability?The probability that a randomly selected man has red-green colorblindness is 0.12.
If we want to find the probability that all 3 selected men have this type of colorblindness, we can multiply the probability of a single man having it (0.12) by itself 3 times.
So the probability that all 3 men have red-green colorblindness is:
0.12 * 0.12 * 0.12 = 0.001728 ≈ 0.0017 or 0.17%
Read more about probability here:
https://brainly.com/question/24756209
#SPJ1
The BEST term to describe the situation when fire activity presents a potential hazard to fireline personnel if the tactics being used are not adjusted is
The Fireline intensity is expressed in terms of flame length. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg).
The heat availability of combustion per unit of ground is the sum of the heat released during a specified period of time for each unit length of the fire's edge and the rate at which the fire spreads per unit of ground area. The basic unit of measurement is Btu/sec/ft of fire front. The Fireline intensity (kW/m) is the rate of energy or heat emission per unit time per unit length of the fire front. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg), the amount of fuel used in the flame front (kg/m2), and the linear pace of fire from a mathematical standpoint.
Learn more about The Fireline intensity here:
https://brainly.com/question/29348434
#SPJ4
Problem 5.1Vectors: FA ,Bx, ByPart A Draw the free-body diagram for the cantilevered beam. A is the a fixed support.Draw the vectors starting at the black dots. The location and orientation of the vectors will be graded. The length of the vectors will not be graded. Double-click on the black dot to indicate the direction of the moment. To change the direction click on the dot one more time.add elementv vector sum delete element attributes 5 reset ? help 6 kN 30° 1.5 m 4 kN -1.5 m→トー1.5 m
Starting with the black dots, draw the vectors. The vectors' position and orientation will be rated. The vectors' lengths won't be graded.
What exactly is a cantilevered building?A projecting volume or girder that is joined to a building at just one end is called a cantilever. Although they have been extensively utilized in bridge design for many years, they are still used in a variety of ways in modern structures.
How do cantilever walls work?Reinforced concrete is used to construct cantilever walls, and an L-shaped (or inverted T-shaped) foundation is used. By transferring the vertical tension behind the wall onto the foundation, the toppling caused by earth pressure lateral generated by the same soil mass is avoided.
To know more about cantilevered visit:
https://brainly.com/question/13254986
#SPJ4
The rate at which your home consumes electricity is measured in kilowatts. If your home consumes electricity at the rate of 1 kilowatt for 1 hour, you will be charged for 1 "kilowatt-hour" of electricity. Suppose that the average consumption rate for a certain home is modeled by the function C(t) = 3.9 - 2.4 sin (πt/12), where C(t) is measured in kilowatts and t is the number of hours past midnight. Find the average daily consumption for this home, measured in kilowatt-hours.
If your home consumes electricity at the rate of 1 kilowatt per 1 hour, you will be charged for 1 "kilowatt-hour" of electricity.
To learn more about 1 "kilowatt-hour" of electricity please click the below link.
https://brainly.com/question/9993543
#SPJ4
a room that is 40 feet by 65 feet with a 10-foot-high joisted ceiling will be protected with heat detection. the joists are 12 inches deep and run in the 40-foot direction. the engineer specified heat detectors with a 50-foot listed spacing. how many heat detectors are required for this room?
Heat detection will be used to protect a 40 by 65-foot space with a provided joisted ceiling. 716 tiles are required because the rafters are 12 inches deep.
A detection sentence is what?Finding sentences within a text is the goal of sentence boundary detection. A phrase is the input unit for several tasks in natural language processing, including part-of-speech tag, dependency analysis, named entity recognition and machine translation.
Calculation
The parameters of a room given in the question are
Length = 10 feet
Width = 14 feet
Height = 12 feet
and Jamie wants to put the tiles on walls and the floor of his room.
Dimensions of each tile
Length = 1 feet
width = 1 feet
Surface area of walls and floor = 4 walls + floor = 4(Area of one wall) + area of floor
= 2(Length×height + width×height) + (length×width)
= 2(10×12 + 14×12) + (10×14) = 2(120+168) + 140 = 2×288 + 140 = 576 +140 = 716
Now total number of tiles required = Total area to be covered/area of one tile
Number of tiles = 716/1 = 716
Therefore 716 tiles needed by Jamie.
To know more about detection visit:
https://brainly.com/question/2136390
#SPJ4
(a) Since the original solution also uses Pb and Vb (implemented using busy-waiting), why is the above solution much worse in terms of performance
Process scheduling that is based on priority is called priority scheduling. The scheduler chooses the jobs to complete according to priority in this algorithm.
The processes that are more important should be completed first, and tasks with equal importance should be completed in a round-robin or FCFS fashion. Priority is determined by factors like memory and time constraints. The CPU has been assigned to a certain process in this kind of scheduling approach. The activity that occupies the CPU will free it by changing context or ceasing. The only approach that works on a variety of hardware platforms is this one. That's because, unlike preemptive scheduling, it doesn't require specialized hardware (like a timer).
Learn more about specialised here-
https://brainly.com/question/28114678
#SPJ4
can someone tell me what is the most happy song and the most sad: alguien me puede decir cual es la cancion mas feliz y la triste.
It is subjective to determine the "most happy" and "most sad" song as it varies from person to person. Different songs can evoke different emotions in different people.
However, some songs that are commonly considered to be happy include "Happy" by Pharrell Williams, "Don't Stop Believin'" by Journey, and "I Will Always Love You" by Whitney Houston. Some songs that are commonly considered to be sad include "Everybody Hurts" by R.E.M., "Tears in Heaven" by Eric Clapton, and "My Heart Will Go On" by Celine Dion.
What makes a song happy?The emotions that a song evokes in a listener are subjective, meaning that they can vary from person to person. For example, a song that one person finds to be happy and uplifting, another person may find to be sad or melancholy. This is because emotions are personal experiences that are shaped by a person's individual life experiences, beliefs, and attitudes.
Therefore, Regarding the songs mentioned, "Happy" by Pharrell Williams, "Don't Stop Believin'" by Journey, and "I Will Always Love You" by Whitney Houston are considered happy songs because they have upbeat tempos, positive lyrics, and a cheerful sound that can make people feel good.
Learn more about happy song from
https://brainly.com/question/8278749
#SPJ1
Calculate the polar radius of gyration of the shaded area about its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = ... mm
The shaded area's polar radius of gyration around its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = 253 mm.
The difference between the area of the complete polygon and the area of the unshaded portion inside the polygon is the area of the shaded region. There are two methods for the area of the shaded component to appear in polygons. The darkened area can be found either in the polygon's centre or on one of its sides. You might occasionally be necessary to determine the size of shaded areas. The area of the shaded zone is often calculated by deducting the area of a smaller inner form from the area of a larger outer shape. "Sector" of a circle is represented by the darkened area. A sector is the area of a circle that is bounded by two radii and an arc.
Learn more about shaded area here
https://brainly.com/question/13515841
#SPJ4
