An inorganic salt is composed of 17.6% sodium, 39.7% chromium, and 42.8% oxygen. What is the empirical formula of this salt?

Answer:

High trainability allows the owner to train the dog to handle certain things--some dog can be trained as police dogs and can be taught various jobs, so high trainability is very important

When a dog is Viscous, the dog will keep people away from your house, they will be able to keep danger away and because they are viscous they will be able to handle danger.

Loud bark- A loud bark from a dog can help alert other people when there is a intruder, it makes alot of noise so they can attract attention easily.

Quiet Bark- Ideal for pet owners who do not like noise, they bark quietly so they are not a bother to work or anyone doing something.

Answer:

A single covalent bond

Explanation:

A single covalent bond is when only one pair of electrons is shared between atoms. A sigma bond is the strongest type of covalent bond, in which the atomic orbitals directly overlap between the nuclei of two atoms.

Answer:

Single covalent bond.

Explanation:

Single covalent bond is the type of bond in which only one pair of electrons is shared between atoms.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

Mixture of sand, pepper powder and salt can be separated by dissolving the mixture into water. Sand and pepper powder is insoluble in water while salt is soluble. So they are separated by the filtration method.

Answer:

See below

Explanation:

This is a simple reaction.

Calcium and chlorine molecule are combined to get calcium chloride.

Ca + Cl₂ → CaCl₂

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

The change in phase of a substance is called a physical change. The substance C with low molecular attraction needs more energy transferred out and thus its kinetic energy have to be decreased to change from gas to liquid.

Energy can neither be created nor be destroyed. However it can be transferred from one form to the other and thus total energy of a system is conserved.

In gaseous state molecules or atoms are far apart and have minimum intermolecular forces of attraction whereas in liquid state they have medium molecular attraction and are a bit close than they are in gas state.

When a substance changes from gas state to liquid state its molecules condenses and becomes more close to each other forming higher molecular attraction.

The gas B have medium molecular attraction and thus will easily liquified with minimum energy transfer whereas, gas C is of less molecular attraction having higher kinetic energy and thus more have to transfer more energy out to liquify.

To find more about physical changes, refer the link below:

https://brainly.com/question/17931044

#SPJ5

Answer:

2.686485288205376 Explanation:

1 grams Iron(III) Oxide is equal to 0.0062622034690102 mole.

Answer:

Sr(OH)2

Explanation:

Strontium hydroxide, Sr(OH)2, is a caustic alkali composed of one strontium ion and two hydroxide ions. ... Sr(OH)2 exists in anhydrous, monohydrate, or octahydrate form.

Answer:

The answer is I

The 4 one represents Solids coz in solids atoms are tightly packed

Answer:

it is because of Dark Matter

Dark Matter, component of the universe whose presence is discerned from its gravitational attraction rather than its luminosity. Dark matter makes up 30.1 percent of the matter-energy composition of the universe; the rest is dark energy (69.4 percent) and “ordinary” visible matter (0.5 percent).

Dark matter is composed of particles that do not absorb, reflect, or emit light, so they cannot be detected by observing electromagnetic radiation. Dark matter is material that cannot be seen directly.

Explanation:

Hope It helps

Have A Nice Day : )

A group of scientists is studying observable matter in a cluster of galaxies. The duster remains intact due to the gravitational pull.

A galaxy is a collection of stars, stellar remains, interstellar gas, dust, and dark matter that are gravitationally bonded together.

Dark matter is a component of the universe whose gravitational pull can be detected rather than its luminosity. The universe's matter-energy ratio is made up of 30.1 percent dark matter, 69.4 percent dark energy, and “regular” visible matter (0.5 percent).

Since dark matter is made up of particles that do not absorb, reflect, or emit light, it is impossible to identify it through electromagnetic radiation observation. Dark matter is a substance that cannot be directly observed.

Therefore, a team of researchers is examining the material that can be seen in a clump of galaxies. Due to the gravitational force, the duster is unharmed.

To learn more about duster, refer to the link:

https://brainly.com/question/24544674

#SPJ2

Answer:

Take 49.2-ml of 18.0 M H2SO4 stock solution and pour it into a 500-ml volumetric flask. Fill to the 500-ml line with distilled water to make 1.77M H2SO4 solution.

Explanation:

use the formula M1V1=M2V2

volume must be in liters(L)

[tex](1.77)(500 \times {10}^{ - 3} ) = (18)v2 \\ 0.885 = 18v2 \\ v2 = \frac{0.885}{18} \\ v2 = 0.04916[/tex]

0.04916L × 1000 = 49.16 ml = 49.2 ml

The correct answer is False.

Explanation:

1397.4 uranium atoms......

Answer:

12.5%

Explanation:

percent blurf = quantity of blurftotal quantity×100quantity of blurftotal quantity×100

So for percent by mass, both quantities are expressed as mass, and it’s the mass of NaCl divided by the total mass of the solution, then times 100%

mass % NaCl = 25 g/175g×100

mass %NaCl = 14.3%

The number of moles of a solute per liter of solution is measured using the unit of concentration known as molarity.

Thus, The approach for resolving molarity issues is quite straightforward. This describes an easy way to figure out how molarity of a solution.

Remembering the units of molarity (M): moles per liter, is the key to calculating molarity. Calculate how many moles of the solute are dissolved in a solution's liter volume to determine its molarity.

The molarity of a solution made by combining 23.7 grams of KMnO4 with 750 mL's worth of water. You must first determine the amount of moles of the solute because this example lacks the liters or moles required to determine molarity.

Thus, The number of moles of a solute per liter of solution is measured using the unit of concentration known as molarity.

Learn more about Molarity, refer to the link:

https://brainly.com/question/31545539

#SPJ1

Answer: A. 8.8%

Explanation:

Percent Error Formula: approximate error - actual value divided by actual value (Approximate-Actual/Actual). After those steps are completed, multiply by 100 to make it a percentage form.

0.365 - 0.400 = -0.035

-0.035 / 0.400 = 0.0875

0.0875 * 100 = 8.75%

8.75% rounded to the nearest tenth is 8.8%

Answer:

The Beer–Lambert law, also known as Beer's law, the Lambert–Beer law, or the Beer–Lambert–Bouguer law relates the attenuation of light to the properties of the material through which the light is travelling.

Explanation:

Please Mark as brainliest

Ca(OH)2 +2 HBr → CaBr2 + 2 H2O 

Answer:

Melting point, boiling point, state of matter at room temperature, heat of vaporization, flammability and reactivity

Explanation:

1. If the surface area of liquid is large then evaporation will be

A. small

B. large

C. moderate

D. slow

B. Large

Evaporation increases with increasing surface area. This is because the greater the surface area (exposed to the air), the more molecules escape into the air.

More surface area = Higher rate of evaporation.

Answer:

mols solute(K2S) = grams/molar mass = ?

Then M = mols/L. You know M and mols, solve for L.

Explanation:

3.5/0.1

L= 35

Hope this helps!!

Please tell me if I have made a mistake!!

I enjoy learning from them:)

Answer:

0.32L

Explanation:

Use formula of V= wt/mm•M.
To get this information we need to first get the molar mass (mm).
mm:
K - 2 x 39.09
S - 1 x 32.06
K2S - 110.262 g/mol

Now we plug it back into the equation.
3.5g/ (110.262 g/mol) • (0.100M)
= 0.317 L of solution

To round to the correct number of siginficant figures the answer is.
= 0.32 L

Answer:

A. oxygen

Explanation:

Oxygen is the waste created after photosynthesis.

Answer:

oxygen

Explanation:

photosynthesis are for plants and plants don't need oxygen

Answer:

Magnesium Chloride is used as a precursor magnesium metals.

Explanation:

Answer:

If the atoms are not identical, the electron distribution is electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.

Explanation: