An organic chemistry student was studying the solubility of Methyl-N-acetyl-α-D-glucosaminide (1-O-methyl-GlcNAc), a derivative of glucosamine, in water but inadvertently added 1 equiv. of periodic acid instead. Based on your understanding of the reactions of monosaccharides with periodates, draw the organic product that the student obtained.

Answer:

1. density = 0.89 g/cm3

2. Yes is possible to identify the liquid

3. ethanolamine

Explanation:

Data:

mass = 682 g

volume = 0.767 L = 767 mL or cm3

1.

To calculate the density of the liquid it is necessary to know that the density formula is:

[tex]density=\frac{mass(g)}{volume(cm^{3}) }[/tex]

The data obtained is replaced in the formula:

[tex]density=\frac{682g)}{767(cm^{3}) }=0.89\frac{g}{cm^{3} }[/tex]

2.

With the given data it is possible to identify the liquid, this because the density value is a basic property of each liquid.

3.

It is possible to determine what liquid it is, since when comparing the value obtained with those reported in the collection of Material Safety Data Sheets (MSOS), the value that agrees is that of ethanolamine.

Answer:

3–bromo–5–chloro–4–methylhexane.

Explanation:

To name the compound given in the question, the following must be observed:

1. Locate the longest continuous carbon chain. This gives the parent name of the compound. In this case, the longest chain is carbon 6 i.e Hexane.

2. Identify the substituents attached. In this case the substituents attached are:

a. Chloro i.e Cl.

b. Bromo ie Br.

c. Methyl i.e CH3.

3. Give the substituents the lowest possible count alphabetically. Bromo comes before Chloro alphabetically, so we shall consider bromo first. Their positions are given below:

Bromo i.e Br at carbon 3

Chloro i.e Cl is at carbon 5

Methyl i.e CH3 is at carbon 4

4. Combine the above to get the name of the compound.

Therefore, the name of the compound is:

3–bromo–5–chloro–4–methylhexane.

Answer:

H3PO4 + 5HCl  → PCl5 + 4H2O

Explanation:

In a chemical reaction, the number of atoms of each element must be the same on both sides of the equation. Notice that, originally, there's only one atom of chlorine on the left side and five atoms of chlorine on the right. The coefficient of 5 is added to the HCl compound to correct this. However, now there are eight atoms of hydrogen on the left and only two on the right. Adding the coefficient of 4 to the H2O compound balances the hydrogen and also balances oxygen on both sides at the same time.

The balanced chemical equation for the reaction:

H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)

To write the balance equation for any given reaction, all we need to do is to ensure that the number of atoms in the reacting species and products formed are equal on both sides of the equation.

The balanced chemical equation for the reaction given in the question can be obtained as follow:

H₃PO₄ + HCl → PCl₅ + H₂O

There are 5 atoms of Cl on the right side and 1 atom on the left. It can be balanced by writing 5 before HCl as shown below:

H₃PO₄ + 5HCl → PCl₅ + H₂O

There are a total of 8 atoms of H on the left side and 2 atoms on the right. It can be balanced by writing 4 before H₂O as shown below:

H₃PO₄ + 5HCl → PCl₅ + 4H₂O

Now, we can see that the number of atoms in the reactants and products are equal.

Thus, the balanced equation for the reaction is

H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)

Learn more about balancing equation:

https://brainly.com/question/12192253

#SPJ6

Answer:

This water has a level acceptable, 0.1359ppm and 135.9ppb.

Explanation:

1.40g of Cl⁻ are:

1.40g Cl⁻ × (1000mg / 1g) = 1400mg Cl⁻

In 1.03x10⁴L:

1400mg / 1.03x10⁴L = 0.1359mg/L.

As the upper limit of Cl⁻ in water is 250mg/L, this water has a level acceptable

ppm are the ratio between mg of solute and liters of solution, that means the tank contains 0.1359mg/L = 0.1359ppm

ppb, parts per billion are 1000 times ppm, thus, parts per billion of the storage tank are:

0.1359ppm × 1000 = 135.9ppb

Answer:

The correct answer is ice cold isopropanol.

Explanation:

Any compound in the initial stage is first dissolved in any suitable solvent and is heated for a certain duration for the process of recrystallization. Afterward, the compound is kept at room temperature so that it gets cooled gradually. In the process, the impurities remain dissolved in the solvent and the pure compound gets separated in the form of a precipitate.  

Post all this, the filtration of the pure compound is done and is then washed with the cold solvent, which was initially used to dissolve the compound. Therefore, the appropriate solvent to use in the process is ice-cold isopropanol.  

Answer:

saturated

Explanation:

Answer:

[tex]m_{precipitated}=24.8g[/tex]

Explanation:

Hello,

In this case, since at 60 °C, 108 grams of ammonium bromide are completely dissolved in 100 grams of water for a saturated solution, once it is cooled to 30 °C, wherein only 83.2 grams are completely dissolved in 100 grams of water, the following mass will precipitate:

[tex]m_{precipitated}=108g-83.2g\\\\m_{precipitated}=24.8g[/tex]

Best regards.

Answer:

I am not sure, but I think this is the answer 72.987 g/mol

Answer:

[tex]n_N=0.041molN[/tex]

Explanation:

Hello,

In this case, for this mole-mass relationship, we are able to compute the moles of nitrogen atoms by firstly obtaining the moles of the given compound, considering its molar mass that is 194 g/mol:

[tex]n_{C_8H_{10}O_2N_4}=2.0gC_8H_{10}O_2N_4*\frac{1molC_8H_{10}O_2N_4}{194gC_8H_{10}O_2N_4} =0.01molC_8H_{10}O_2N_4[/tex]

Then, by knowing that one mole of the given compound has four moles of nitrogen atoms, we apply the following relationship:

[tex]n_N=0.01molC_8H_{10}O_2N_4*\frac{4molN}{1molC_8H_{10}O_2N_4} \\\\n_N=0.041molN[/tex]

Best regards.

Answer:

0.5 mole

Explanation:

The question isn't even clear

But I'm guessing you want to ask the number of moles

n= Number of molecules/ Avogadros number

n= 1/2

Complete question;

Nitrogen forms more oxides than any other element. The percents by mass of N in three different nitrogen oxides are (|) 46.69%;(II) 36.85 %; (III) 25.94%. For each compound, determine (a) the simplest whole-number ratio of N to O, and (b) the number of grams of oxygen per 1.00 g of nitrogen.

Answer:

a. (i) The ratio is 1:1 , the formula = NO  (ii)The ratio is 1 : 1.5 which is  2 : 3, the formula = N₂O₃  (iii) The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅

b. (i)number of grams of oxygen = 53.31/46.69 = 1.14 g

(ii)number of grams of oxygen = 63.15/36.8 = 1.71 g

(iii)number of grams of oxygen = 74.06/25.94 = 2.855 g

Explanation:

a.

(i) The percentage by mass of the nitrogen in Nitrogen oxide (i) is 46.69% which is taken as 46.69 grams . Since the other element is oxygen the mass of oxygen will be 100 - 46.69 = 53.31 grams.

The relative atomic mass of Nitrogen and oxygen is 14 amu and 16 amu respectively.

Therefore, to know the whole number ratio of N and O we find the number of moles.

number of moles of N = 46.69/14 = 3.335

number of moles of O = 53.31/16 = 3.332

The ratio is 1:1 , the formula = NO

(ii)

number of moles of N = 36.85/14 = 2.632

number of moles of O = 63.15/16 = 3.947

The ratio is 1 : 1.5 which is  2 : 3, the formula = N₂O₃

(iii)

number of moles of N = 25.94/14 = 1.85

number of moles of O = 74.06/16 = 4.63

The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅

b.

(i) 46.69 g of nitrogen  = 53.31 g of oxygen

1 g of nitrogen = ? of Oxygen

number of grams of oxygen = 53.31/46.69 = 1.14 g

(ii)

Using similar method in b(i)

number of grams of oxygen = 63.15/36.8 = 1.71 g

(iii)

Using similar method in b(i)

number of grams of oxygen = 74.06/25.94 = 2.855 g

Answer:

Hydrogen peroxide is ans

Answer:

5

Explanation:

Answer:

5

Explanation:

Answer:

Around 3.62 degrees kelvin

Explanation:

Assuming this is at STP:

The first step is to convert 2600mL to liters. There are 1000 milliliters in a liter, meaning that this is equal to 2.6L.

Now:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\\\\dfrac{196(1)}{273}=\dfrac{2.6(1)}{T_2} \\\\\\T_2\approx 3.62K[/tex]

Hope this helps!

Answer:

Manganese(II) phosphate | Mn3(PO4)2 - PubChem

Answer:

Magnese(ll) posphate M23 (p042) Molecular weight.

That is what the leters stand for!

Answer:

Explanation:

Condensation is the word you seek.

Answer:

Condensation

Explanation:

When a gas is subjected to decrease in temperature it is condensed

Answer:

  1703 mmHg

Explanation:

Volume and pressure are presumed to be inversely proportional. Hence a change in volume by a factor of 125/325 = 5/13 is expected to change the pressure by a factor of 13/5:

  (13/5)(655 mmHg) = 1703 mmHg

Answer:

The brain

Explanation:

With all those instructions the body recqures to respond to it must be so

Hope it helps

Answer:

water stored in a dam

Explanation:

when the water is in dam it is ready to move bit is not moving

Answer:

  1

Explanation:

Any relation with a repeated input value is not a function.

Table 1 has the input value 2 listed twice, so does not represent a function.

Answer: Aluminum symbol Al or aluminum American English

Explanation:

Answer:

Hii

Li( Lithium)

Explanation:

Lithium has the atomic number of three and is the third element in periodic table.

Answer:

B. Their productive organisms play a major role in nutrient recycling.

Explanation:

Coral reefs contain photosynthetic algae that help coral reefs in processing nutrients and contribute in the nutrient cycle.

The process of photosynthesis in corals leads to carbon fixing in which corals transform, carbon dioxide, into organic carbon.  carbon fixing property allows corals to become primary producers.

Dissolve organic matter produced by corals is consumed by several organisms such as crabs, worms, fish, and snails.

Hence, coral reefs maintain the flow of energy and nutrient cycle in the biosphere and the correct option is B.

Answer:

Grams , centimeters cubed, and grams per centimeter

Explanation:

Answer:

It is the portion of internal energy that can be transferred from one substance to another.

Thermal energy is the portion of internal energy that can be transferred from one substance to another.

Thermal energy is the energy an object posses which is as a result of particles movement within it.

It is also the internal energy system in a state of thermodynamic equilibrium which is as a result of its temperature. Thermal energy cannot be concert to useful work easily.

Therefore, thermal energy is the portion of internal energy that can be transferred from one substance to another.

Learn more about thermal energy from the link below.

https://brainly.com/question/19666326

Answer:

- Four for iron, three for oxygen and 2 for iron (III) oxide:

[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]

Explanation:

Hello,

In this case, the oxidation of iron is a widely acknowledged reaction occurring in ships and other machines exposed to the air or highly oxidizing medias. Thus, by the effect of oxygen, iron undergoes oxidation typically to iron (III) oxide:

[tex]Fe+O_2\rightarrow Fe_2O_3[/tex]

Nonetheless, the law of conservation of mass must be respected, therefore the coefficients balancing the reaction are four for iron, three for oxygen and 2 for iron (III) oxide:

[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]

Best regards.

Answer:

The correct answer is Option A (There is no magnetic flux through the wire loop.)

Explanation:

Magnetic flux measures the entire magnetic field that passes through the wire loop.

The right hand rule can be demonstrated on how magnetic flux is generated through the moving current in the wire loop. The magnetic flux through the wire loop  will decrease as it moves upward through the magnetic field region.

If the direction of the vector area of the wire loop is to the right, and the switch is closed, it will push the magnetic flux to the right which will now be increased due to an equal increase in the current in the wire loop. But, when the switch is open, this will halt the movement of current through the wire loop thus affecting the generation of magnetic field. This would make the magnetic flux to be zero.

The statement related to the magnetic flux is option A i.e. no magnetic flux is there.

It determined the overall magnetic field that should be passed via the looping of the wire. here the right-hand rule represent how the magnetic flux should be created via the movement of the current.

Also, it should be decreased in the case when it should be moved upward. Also, in the case when the direction of the vector area should be right so the switch should be closed.

Therefore, the option A is correct.

Learn more about magnetic here: https://brainly.com/question/18704022

Answer: Transpiration---A

Explanation: Transpiration is the process in the water cycle whereby plant loose(excess) water by evaporation through the stomata of their leaves since not all water absorbed by the root is actually used for growth in plants.In order to allow the intake of carbon-dioxide, water must exit the leaves through transpiration which then  provides the plant with cooling, rigidity and maintaining the overall water balance of the plant.

Answer:

a) ammonium ion

b) amide ion

Explanation:

The order of decreasing bond angles of the three nitrogen species; ammonium ion, ammonia and amide ion is NH4+ >NH3> NH2-. Next we need to rationalize this order of decreasing bond angles from the valence shell electron pair repulsion (VSEPR) theory perspective.

First we must realize that all three nitrogen species contain a central sp3 hybridized carbon atom. This means that a tetrahedral geometry is ideally expected. Recall that the presence of lone pairs distorts molecular structures from the expected geometry based on VSEPR theory.

The amide ion contains two lone pairs of electrons. Remember that the presence of lone pairs causes greater repulsion than bond pairs on the outermost shell of the central atom. Hence, the amide ion has the least H-N-H bond angle of about 105°.

The ammonia molecule contains one lone pair, the repulsion caused by one lone pair is definitely bless than that caused by two lone pairs of electrons hence the bond angle of the H-N-H bond in ammonia is 107°.

The ammonium ion contains four bond pairs and no lone pair of electrons on the outermost nitrogen atom. Hence we expect a perfect tetrahedron with bond angle of 109°.

Explanation:

A Bronsted-Lowry base is a substance that accepts a proton in the form of a hydrogen (H) atom.

On the other hand;

Bronsted-Lowry acid is the substance that donates the proton.

HF (aq) + SO32- ⇌ F- + HSO3-

In the forward reaction;

Bronsted-Lowry acid : HF

Bronsted-Lowry base: SO32-

In the backward reaction;

Bronsted-Lowry acid : HSO3-

Bronsted-Lowry base: F-

The conjugate base of HF is F-

The conjugate acid of SO32- is HSO3-