As the sample size increases, the standard error of the mean decreases.
How does the standard error change as the sample size grows?
Standard error diminishes as sample size grows because sample means tend to cluster more closely around the genuine population mean as sample size approaches the true population size.
What grows as the sample size grows?
Our estimate is more accurate since we have more information and hence more data. Our estimate is more certain, our uncertainty is lower, and our precision improves as our sample size grows.Learn more about Standard error
brainly.com/question/13179711
#SPJ4
A central angle of a polygon is formed by line segments drawn from the center to two __ vertices.
The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon.
The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon. If you were to draw a line from any two adjacent vertices to the center, they would make the central angle. Because the polygon is regular, all central angles are equal. It does not matter which side you choose.
All central angles would add up to 360° (a full circle), so the measure of the central angle is 360 divided by the number of sides. Or, as a formula:
[tex]central \ angle = \frac{360}{n}[/tex] degrees
where n is the number of sides
The measure of the central angle thus depends only on the number of sides. The angle depends only on the number of sides, not the size of the polygon. If you change the number of sides, you will see that as the number of sides gets larger, the cenral angle gets smaller.
Therefore, The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon.
Learn more about central angle here https://brainly.com/question/15698342
#SPJ1
The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon.
The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon. If you were to draw a line from any two adjacent vertices to the center, they would make the central angle. Because the polygon is regular, all central angles are equal. It does not matter which side you choose.
All central angles would add up to 360° (a full circle), so the measure of the central angle is 360 divided by the number of sides. Or, as a formula:
midpoint = [tex]\frac{360}{9}[/tex]degrees
where n is the number of sides
The measure of the central angle thus depends only on the number of sides. The angle depends only on the number of sides, not the size of the polygon. If you change the number of sides, you will see that as the number of sides gets larger, the cenral angle gets smaller.
Therefore, The central angle is the angle made at the center of the polygon by any two adjacent vertices of the polygon.
Learn more about central angle here brainly.com/question/15698342
#SPJ1
Translate the triangle. Then enter the new coordinates.
Question is down below, please answer if you know! :)
Answer:
a - ( 3,0 )
b - ( 6,-3 )
c - ( 2, -3 )
Step-by-step explanation:
Hope this helps! I added 6 to the x and subtracted 4 from the y to translate it to the new position
The price of a technology stock has dropped to $9.53 today. Yesterday’s price was $9.64. Find the percentage decrease.
Answer:
1%
Step-by-step explanation:
9.64-9.53 = 0.11
0.11/ 9.64 = 0.011 x 100 = 1.1% or basically 1%
13. 4 people are splitting the
bill at a restaurant. If the
cost was $36.08, how much
will each person owe?
1
Answer:
Each person will owe $9.02
Step-by-step explanation:
Just divide 36.08 by 4
Answer:
$9.02
Step-by-step explanation:
36/4 = 9
8/4 = 2, so 0.08/4 = 0.02
36.08/4 = 9.02
Find the missing angle
Position and label each triangle on the coordinate plane.
isosceles ΔW X Y with height h and base W Y with length 2 a .
The position and label triangle on the coordinate plane is shown in figure.
And, The coordinates of ΔW X Y are W (-a, 0), Y (a, 0) and X (0, h).
Here,
Given that;
Isosceles ΔW X Y with height h and base WY with length 2a.
We have to draw position and label triangle on the coordinate plane.
What is Isosceles triangle?
A triangle that has at least two sides of equal length is called Isosceles triangle.
Now,
The position and label triangle on the coordinate plane is shown in figure
with isosceles triangle ΔW X Y with h and base WY with length 2a.
And, The coordinates of ΔW X Y are W (-a, 0), Y (a, 0) and X (0, h).
Learn more about the isosceles triangle visit:
https://brainly.com/question/25301673
#SPJ4
what does (0,0) represent
Answer:
0,0 represents the origin of the graph
4/7 x 35/28 x 70/30 x 12/5
4/7 x 35/28 x 70/30 x 12/5 is 4
Si en la pandemia de 1918 murieron 40 millones ¿Qué porcentaje representa del total de la población mundial de ese año?
La "Gripe Española" de 1.918 acabó con 2.105 por ciento de la población mundial de su tiempo.
¿Cuál es el porcentaje de personas muertas por causa de la "Gripe Española" de 1918?
La "Gripe Española" fue una enfermedad respiratoria emparentada con los virus SARS-COV vistos en las últimas dos décadas que alimentó una pandemia que mató a decenas de millones de personas entre 1.918 y 1.920.
En esta pregunta debemos determinar el porcentaje de personas muertas con respecto a la población mundial de la época. Esto calcula al dividir el número de personas muertas por el número total de pobladores del mundo y multiplicar tal razón por 100.
La población aproximada del mundo en 1.920 fue de casi 1.900 millones de personas, entonces tenemos que el porcentaje de personas muertas es:
x = (40 000 000 / 1 900 000 000) × 100
x = 2.105 %
La "Gripe Española" de 1.918 acabó con 2.105 por ciento de la población mundial de su tiempo.
Para aprender más sobre porcentajes: https://brainly.com/question/23935688
#SPJ1
Determine the slope of the line that contains the given points.
R(2,-6), S(-6,5)
The slope of the line that contains the points R(2,-6), S(-6,5) is [tex]\frac{-11}{8}[/tex] .
Slope of a line containing two points (a,b) and (c,d) is denoted by
slope =[tex]\frac{d-b}{c-a}[/tex].
In the given question
The points given are R(2,-6) and S(-6,5)
a=2, b= -6 and c= -6 and d=5
Substituting the values in formula of slope we get
[tex]Slope=\frac{d-b}{c-a}[/tex]
Slope=[tex]\frac{5-(-6)}{-6-2}[/tex]
[tex]=\frac{5+6}{-8} \\ \\ =\frac{-11}{8}[/tex]
Therefore , the slope of the line that contains the points R(2,-6), S(-6,5) is [tex]\frac{-11}{8}[/tex].
Learn more about slope of line here https://brainly.com/question/16180119
#SPJ4
How much volume (in cm3 ) is gained by a person who gains 11.0 lblb of pure fat?
The person who have gained 11 lb. of pure fat will gain 5,500 cm³ of volume.
It is given in the question that the person gains 11 lb. of pure fat.
We have to find the volume (in cm3 ) gained by the person.
We know that,
The density of fat is about 0.9 grams/ml
Converting this in pounds, we get :-
0.9 grams/ml * 1 lb. / 454 grams * 1 ml / 1 cm³= 0.002 lb./cm³
We know the formula of density:-
Density = mass / volume
Hence,
Volume = mass / density
Volume = 11 / 0.002
Volume = 5,500 cm³.
To learn more about Volume, here:-
https://brainly.com/question/1578538
#SPJ4
URGENTTT PLEASE HELP !! :3
Lacey has two pieces of ribbon, one 30 inches long and the other 48 inches long. To decorate an album, she wants to cut them up to produce many pieces of ribbon that are all of the same length, with no ribbon left over. What is the greatest length, in inches, that she can make them?
The greatest length, in inches, that she can make from the two pieces of ribbon is 6 inches
Greatest common factorRibbon A = 30 inches longRibbon B = 48 inches longFind the factors of 30 and 48
30 = 1, 2, 3, 5, 6, 10, 15 and 30.48 = 1, 2, 3, 4, 6, 8, 12, 16, 24 and 48.The greatest common factor of 30 and 48 is 6
Therefore,
Ribbon A can be cut into = 30 / 6
= 5 pieces
Ribbon B = 48/6
= 8 pieces
Learn more about greatest common factor:
https://brainly.com/question/219464
#SPJ1
How is finding a missing term of a geometric sequence using the geometric mean similar to finding a missing term of an arithmetic sequence using the arithmetic mean? How is it different?
The two are similar, because: in both AP and GP, we can find the mean value using first and last values.
The two are different because: in both AP and GP, different methods are used to find the mean value.
What is an arithmetic and a geometric progression?A series of numbers called an arithmetic progression or arithmetic sequence (AP) has a constant difference between the terms.A geometric progression, sometimes referred to as a geometric sequence in mathematics, is a series of non-zero numbers where each term following the first is obtained by multiplying the preceding one by a constant, non-zero value known as the common ratio.Now,
AP and GP are similar because the middle value, or mean value in both AP and GP, can be determined by using the initial and last values. They differ because there are various methods for calculating that number, and each phrase is distinguished by either a common ratio or a common difference.To learn more about arithmetic and geometric progressions, refer to the link: https://brainly.com/question/13899779
#SPJ4
Are parallel lines (parallelism) and collinear points (collinearity) preserved under all transformations? Explain.
Yes, all transformations such as translations, reflections, dilations, and rotations preserve parallel lines (parallelism) as well as collinear points (collinearity).
Parallel lines:
Parallel lines are coplanar straight lines that don't intersect at any point in geometry. Parallel planes are planes that never meet in the same three-dimensional space. Parallel curves are those that do not touch or intersect and maintain a constant minimum distance.Collinear points:
The collinearity of a series of points in geometry is the property of their being on a single line.A set of points with this property is known as a collinear set. In a broader sense, the term has been applied to aligned objects, that is, things that are "in a line" or "in a row."So,
Translation, reflection, dilation, and rotation are all examples of transformation. In all of the preceding cases, parallel lines or collinear points will remain parallel or collinear.Therefore, yes, all transformations such as translations, reflections, dilations, and rotations preserve parallel lines (parallelism) as well as collinear points (collinearity).
Know more about Parallel lines here:
https://brainly.com/question/24607467
#SPJ4
Express the function f(x) = [tex]\frac{x+1}{7}[/tex] in y=mx+b
Answer: f(x)= 1/7 * x + 1/7
Step-by-step explanation:
f(x) = (x+1)/7
f(x) = x/7 + 1/7
f(x)= 1/7 * x + 1/7
The art teacher gave each student half a sheet of paper and told the students to color one fourth of their pieces of paper. What part of the original sheet did the students color?
Please Help
Simplify (4⁴)−1.
Answer:
255
Step-by-step explanation:
[tex](4^4)-1 \\ \\ =256-1 \\ \\ =255[/tex]
у < 2x + 3
2x + 5y ≥ 10
Can you please help me!
Step-by-step explanation:
Do you understand if you don't understand the answer notify me
Evaluate the expression 21 divided by 7(6 divided by 3) cube +1
Answer:
48 I think
Step-by-step explanation:
(6 divided by 3)= 2
2 cubed= 16
21 divided by 7= 3
3 times 16= 48
Answer:
Step-by-step explanation:
21 / 7(6/3)^3 + 1
= 21/7 * 2^3 + 1
= 3*8 + 1
= 25.
A cake has 77 slices. Harry ate 48 slices; Jack ate 17 slices; Dave ate 3 & Mary ate 6 slices. What fraction of the cake is remaining?
Answer:3/77
because 77/77 minus 48/77 is 29/77-17/77 is 12/77 minus-9(because I just added 3 and 6 so don't hey confused I just added them up) is 3/77 and thats your answer (3/77)
Step-by-step explanation:
A circular pillar candle is 2.8 inches wide and 6 inches tall. What are the lateral area and surface area of the candle? Round to the nearest tenth if necessary.
Lateral area and surface area of candle is 52.8 inches² and 65.1 inches².
We are given the height and width of pillar candle. So, firstly writing the formula of lateral area and surface area of cylinder followed by calculation.
Lateral area of cylinder = 2πrh, where r stands for radius and h represents height.
Surface area of cylinder = 2πrh + 2πr²
Radius = diameter÷2
Radius = 2.8÷2
Radius = 1.4 inches
Keep the values in formula for calculation -
Lateral area of cylinder = 2×3.14×1.4×6
Lateral area of cylinder = 52.78 inches²
Surface area of cylinder = 2×3.14×1.4×6 + 2×3.14×1.4²
Surface area of cylinder = 65.09 inches²
Rounding off to nearest tenth-
Lateral area of cylinder = 52.8 inches²
Surface area of cylinder = 65.1 inches²
Hence, the lateral area and surface area of cylinder is 52.8 inches² and 65.1 inches².
Learn more about calculations on pillar -
https://brainly.com/question/22982196
#SPJ4
Explain why the sum of the probabilities of two mutually exclusive events is not always 1 .
The probabilities of mutually exclusive events are always smaller than 1.
In statistics, what does a probability mean?
The probability serves as a gauge for how likely an event is to occur. It gauges how likely an event is. P(E) = Number of Favorable Outcomes/Number of Total Outcomes is the formula for probability.The probability of events that are mutually exclusive cannot ever be added up to greater than one.
Unless the same set of occurrences is also exhaustive, in which case the total of their probabilities is exactly 1, the probabilities of mutually exclusive events are always smaller than 1.
The likelihood that none of these occurrences, which are mutually exclusive, will occur is (1 - the sum of their probabilities).
Learn more about probability
brainly.com/question/11234923
#SPJ4
Mr McCormick's wife is building some IKEA furniture, and the table below from the instructions show the lengths of different parts. Which part letter is the longest?
LENGTH (IN.)
Part A
Part B
Part C
Part D
Answer: Part B
Step-by-step explanation:
A = 1.2857...
B = 1.3
C = 1.15
D = 1.05
Cause yes
I need this answered please
Mr.faucet only has $220 left in his bank account until her gets paid friday. But he has a credit card with $3000 limit he can use if mr.fawcett wants to buy a $4000 necklace for his wife ,what will his credit card balance be after the purchase??
HELP
Answer: -1000
Step-by-step explanation:
State whether each sentence is true or false. If false, replace the underlined term to make a true sentence.
A right solid has an axis that is also an altitude.
The given statement "A right solid has an axis that is also an altitude" is False. The Correct statement is "A right Cone has an axis that is also an altitude".
The altitude of the cone is the perpendicular segment from the vertex to the plane of the base. The length of the altitude is also the height of the cone. So we can say that A right Cone has an axis that is also an altitude.
A right solid have an axis that is also an altitude is the incorrect statement. So, the correct statement is that a right cone has an axis that is also an altitude.
To know more about Right Cone refer to the link:
https://brainly.com/question/27815426
#SPJ4
HELP PLEASE!!!!!
Chantel has a goal to complete a triathlon. The race consists of a 2.4-mile swim, a 112-mile bike ride, and a 26.2-mile run. In training, Chantel can swim at an average pace of 1.2mph. She rides her bike at an average of 18.8mph and runs at 6.2mph. Estimate how long it will take her to complete the triathlon.
Chantel will take approximately 12.19 hours to complete the triathlon with the given speed of his.
Total distance covered for the race is:
For swimming = 2.4 miles
Speed of Chantel in swimming = 1.2 miles per hour.
So, time taken for completing the swimming part = 2.4 / 1.2 = 2 hours.
For bike ride = 112 miles
Speed of Chantel in bike riding = 18.8 miles per hour
So, time taken for completing the bike riding part = 112 / 18.8 = 5.96 hours.
For running = 26.2 miles
Speed of Chantel in running = 6.2 miles per hour.
So, time taken for completing the running part = 26.2 / 6.2 = 4.23 hours.
Total time = 2 + 5.96 + 4.23 = 12.19 hours.
Therefore, Chantel will take approximately 12.19 hours to complete the triathlon with the given speed of his.
Learn more about speed here:
https://brainly.com/question/4931057
#SPJ1
Izzie is trying to solve this inequality. After she solves it, she shows it to you, and she asks you if she did it correctly. This is the work she completed:
3(t+1)−4t≥−5
Step 1: 3t +3−4t≥−5
Step 2: −t+3≥−5
Step 3: −t≥−8
Step 4: t≥8
The solution when Izzie is trying to solve this inequality 3(t+1)−4t≥−5 is incorrect.
How to illustrate the information?From the information, Izzie is trying to solve this inequality. After she solves it, she shows it to you, and she asks you if she did it correctly.
3(t+1)−4t≥−5
3t + 3 - 4t ≥ -5
Collect like terms
3t - 4t ≥ −5 - 3
-t ≥ −8
Divide by -1
t <= 8
Therefore, the solution of Is lzzie is incorrect.
Learn more about inequalities on:
brainly.com/question/11613554
#SPJ1
Izzie is trying to solve this inequality. After she solves it, she shows it to you, and she asks you if she did it correctly. This is the work she completed:
3(t+1)−4t≥−5
Step 1: 3t +3−4t≥−5
Step 2: −t+3≥−5
Step 3: −t≥−8
Step 4: t≥8
Is Izzie correct?
Evaluate each infinite geometric series. 3+1+1/3 +1/9+ . . . .
