Answer:
5SiO[tex]_{2}[/tex] + 2CaC[tex]_{2}[/tex] → 5Si + 2CaO + 4CO[tex]_{2}[/tex]
5 2 5 2 4 are your answers.
at what temperature would 2.10moles of N2 gas have a pressure of 1.25atm and fill a 25.0 L tank
Answer:
[tex]\large \boxed{\text{-92 $^{\circ}$C}}[/tex]
Explanation:
We can use the Ideal Gas Law and solve for T.
pV = nRT
Data
p = 1.25 atm
V = 25.0 L
n = 2.10 mol
R = 0.082 06 L·atm·K⁻¹mol⁻¹
Calculations
1. Temperature in kelvins
[tex]\begin{array} {rcl}pV & = & nRT\\\text{1.25 atm} \times \text{25.0 L} & = & \rm\text{2.10 mol} \times 0.08206 \text{ L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times T\\31.25&=&0.09847T\text{ K}^{-1}\\T& = &\dfrac{31.25}{\text{0.098 47 K}^{-1}}\\\\& = &\text{181 K}\end{array}[/tex]
2. Temperature in degrees Celsius
[tex]\begin{array} {rcl}T & = & (181 - 273.15) \, ^{\circ}\text{C}\\& = & -92 \, ^{\circ}\text{C}\\\end{array}\\\text{The temperature of the gas is $\large \boxed{\mathbf{-92 \, ^{\circ}}\textbf{C}}$}[/tex]
The energy from 0.015 moles of octane was used to heat 250 grams of water. The temperature of the water rose from 293.0 K to 371.2 K. What is the enthalpy of combustion of octane? The specific heat capacity of water is 4.18 J/K g.
A. -5448 kJ/mol
B. 1226 kJ/mol
C. -1226 kJ/mol
D. 293.25 kJ/mol
Answer:
A.) -5448 kJ/mol
Explanation:
I got it correct on founders edtell
What is one way to make stored water safe?
Even though you asked for ONE WAY, I found some other good ways.
1. Thoroughly wash plastic soda bottles or milk jugs with warm, soapy water.
2. Store sealed containers in a dark, dry, and cool place.
3. If after six months you have not used the stored water, empty it from the containers and repeat steps 1 through 3 above.
1. Look at yourself in the front of the spoon (the side where the food sits). What do you see?
The you see the image
Answer:
If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.
Explanation:
The word 'concave' means to bend inwards.
A curved mirror is a mirror that has a curved reflecting surface.
The front side of the spoon is just like a concave mirror. If you look at yourself in the front of the spoon, you see that the mirror forms an inverted real image.
Concave mirrors produce real inverted image of an object only if it is placed further away from the mirror than the focal point.
Answer:
It shows me upside down like a ghost. OoooOooh
Explanation:
Boo
Attempt 1 of 1
Which of the following is most likely to have a crystalline structure?
wood
rubber
glass
quartz
Answer: Quartz
Explanation: I looked it up ;)
What would the molecular formula be if lithium and sulfur reacted to form a neutral compound?
Answer:
Li2SExplanation:
Since Lithium gives away one electron, I believe it goes to Sulfur.
Hope this helps! :)
Answer:
Li*2S
Explanation:
ed tell chem
Which phrase describes a feature of a Mercator projection? is least commonly used sizes most features to scale presents longitude lines as parallel shows most accurately near the prime meridian
QUICK
Answer:
presents longitude lines as parallel
Explanation:
The Mercator projection shows longitude lines as parallel, hence greatly distorts sizes and distances near the poles. A useful feature is that a course of constant bearing shows as a straight line.
Answer:
C.) presents longitude lines as parallel
Explanation:
Took it on E2020
The electron dot diagram for a neutral atom of chlorine (atomic number 17) is shown below.
Which of the following symbols represents a chlorine ion with a stable arrangement of eight valence electrons?
A. 35Cl1-
B. 35Cl2-
C. 35Cl1+
D. 35Cl
Answer:
A. 35Cl1-
Explanation:
Chlorine needs 1 more electron to have full octet thus will take 1 electron and possess a -1 charge.
Level 3- How is tooth decay related to pH?How can it be prevented?
Answer:
A lower pH of the mouth creates bad bacteria that eventually lead to decay of the tooth.
It can be prevented by avoiding food that causes acidity.
Explanation:
Tooth decay is caused by the pH level in the mouth dropping below 5.5, meaning it is acidic. It can be prevented by brushing your teeth as toothpaste is an alkali which will neutralise the pH level in your mouth.
Hope this helps
In the following reaction, which are the products?
Mg + 2HCl —> H2 + MgCl2
If you could, please explain as well.
Answer: H2 + MgCl2
Explanation: As they are on the right side of the equation/ are the products being made as a result of the reaction, they are the products.
A 500ml bottle contains 2.50 moles of gas. What is the new volume when the number of miles is increased 5.00 moles?
Answer:
The new volume is 1,000ml
Explanation:
Mathematically, we know that the number of moles per ml(volume) should be constant irrespective of the increase.
Initially, we have a volume of 500 ml and number of moles of 2.5 moles
The ratio of the number of moles to the volume is 2.5/500 = 0.005 mole/ml
Now, this is expected to remain the same even if we have an increment.
let’s call the new volume x
0.005 mol/ml = 5 moles/x ml
x = 5/0.005 = 1,000 ml
Give some examples of how ultraviolet rays can be used
Answer:
One of the most common ways of producing UV light is passing an electric current through vaporized mercury or some other gas. This type of lamp is commonly used in tanning booths and for disinfecting surfaces. The lamps are also used in black lights that cause fluorescent paints and dyes to glow.Explanation:
WILL MARK BRAINLIEST IF GOOD EXPLANATION...
Ethyl acetate is a sweet-smelling solvent used in varnishes and fingernail polish remover. It is produced industrially by heating acetic acid and ethanol
together in the presence of sulfuric acid, which is added to speed up the
reaction. The ethyl acetate is distilled off as it is formed. The equation for the
process is as follows.
CH3COOH + CH3CH2OH --> CH3COOCH2CH3 + H2O
Determine the percentage yield in the following cases:
a. 68.3 g of ethyl acetate should be produced but only 43.9 g is recovered.
b. 0.0419 mol of ethyl acetate is produced but 0.0722 mol is expected. (Hint:
Percentage yield can also be calculated by dividing the actual yield in moles
by the theoretical yield in moles.)
c. 4.29 mol of ethanol is reacted with excess acetic acid, but only 2.98 mol of
ethyl acetate is produced.
d. A mixture of 0.58 mol ethanol and 0.82 mol acetic acid is reacted and 0.46
mol ethyl acetate is produced. (Hint: What is the limiting reactant?)
Answer:
a) 64.27%
b) 58%
c) ethanol is the limiting reactant
d) ethanol is the limiting reactant
Explanation:
We have to note that the expected yield is the theoretical yield while the actual mass or amount of product formed is the actual yield.
a) theoretical yield=68.3g
Actual yield= 43.9 g
Percentage yield= 43.9/68.3 ×100
Percentage yield= 64.27%
b) theoretical yield= 0.0722 moles
Actual yield = 0.0419
Percentage yield= 0.0419/0.0722 × 100
Percentage yield= 58%
c) note that the limiting reactant yields the least number of moles of product
Ethanol will be the limiting reactant since it is not present in excess.
d) from the reaction equation;
1 mole of acetic acid produces 1 mole of ethyl acetate
0.58 moles of ethanol produces 0.58 moles of ethyl acetate
1 mole of acetic acid yields 1 mole of ethyl acetate
Hence 0.82 moles of acetic acid yields 0.82 moles of ethyl acetate
Hence ethanol is the limiting reactant.
where are people mostly exposed to chemicals?
Answer:
people are mostly exposed to chemicals through their nose, mouth, eyes, and ears
Explanation:
they are the easiest way for anything, bad or good, to enter the body because people touch their face alot.
This might not answer what you were looking for but the other answer covered it pretty well so I thought I'd give you another angle to the question!
Hope this helps!!
Element X is a solid that is brittle, lacks luster,and has six valence electrons. In which group on the Periodic Table would element X be found
Answer:
Sulfur?
Explanation:
Sulfur has 6 valence electrons and does not have luster.
A 2.575 g piece of gold (specific heat = 0.129 J/g°C) at a temperature of 75°C is placed into cold water at 10°C. If the gold loses 10.0 J of energy, what is its final
temperature in the water? Enter your answer to the
nearest whole number of °C.
Answer:
The final temperature of the mixture is 44.9°C
Explanation:
Mass of the substance (gold) = 2.575g
Specific heat capacity of gold = 0.129J/g°C
Initial temperature (T1) = 75°C
Final temperature (T2) = ?
Energy lost = 10J
Heat energy(Q) = MC∇T
Q = heat energy (in this case lost)
M = mass of the substance
C = specific heat capacity of the substance
∇T = change in temperature of the substance = (T2 - T1)
Q = MC∇T
Q = MC(T2 - T1)
-10 = 2.575 × 0.129 × (T2 - 75) energy is -ve because it was energy lost.
-10 = 0.3321 × (T2 - 75)
-10 = 0.3321T2 - 24.9075
Collect like terms
0.3321T2 = 24.9075 - 10
0.3321T2 = 14.9075
T2 = 14.9075 / 0.3321
T2 = 44.88
T2 = 44.9°C
The final temperature of the mixture is 44.9°C
Which of the following is true for a gas under conditions of very low temperature? PV ÷ nRT = 1, because all gases behave ideally at very low temperatures. PV ÷ nRT = 1, because the actual volume of the gas molecules becomes considerable. PV ÷ nRT > 1, because the low temperatures speed up the particles. PV ÷ nRT < 1, because particles are unable to overcome intermolecular attractions.
pls help as soon I will give brainlist
Answer:
1) Conditions necessary for rusting are:
a) Presence of atmospheric oxygen or air
b)Presence of water or moisture
2) For protecting the iron gate, we can paint it because the paint will coat it and protect it from atmospheric oxygen and water.
3) Magnesium, Carbon and Oxygen (MgCO₃)
let's consider the effectiveness of two antacids to illustrate how chemical calculations can be important in daily life. Baking soda NaHCO3, is often used as an antacid. It neutralizes excess hydrochloric acid sereted by stomach. The balanced equation for the reaction is NaHCO3(s)+HCl(aq)=H20(l)+CO2(g). Milk of magnesia, which is an aqueous suspension of magnesium hydroxide, Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq), Which anatacid can consume the most stomach acid, 1.00g of NaHCO3,or 1.00g of Mg (OH)2?
Answer:
Milk of Magnesia would consume the most stomach acid at almost 3 times the amount as baking soda.
Explanation:
Baking Soda = NaHCO3(s)+HCl(aq)=H20(l)+CO2(g)
NaHCO3 Molar mass of 84.007 g/mol
0.012 Moles of NaHCO3 and since an equal ratio of HCl is required
we therefore neutralize 0.012 Moles of HCl
Milk of magnesia = Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq)
Mg(OH)2(s) Molar mass: 58.3197 g/mol
0.017 Moles of Mg(OH)2 and the ratio is 2:1, so 2 moles for each 1 mole of Mg(OH)2, so we need 0.034 Moles of HCl
50 points - I need this really soon! plz help
The pictured compound has which bond?
A.) C = C and C −C
B.) C = C and C −H
C.) C −Cand C −H
D.) C −C, C −H, and C −O
Answer:
C.
Explanation:
Butane (C4H10) has 3 C-C bonds in the carbon chain and 10 C-H bonds
Butane ([tex]C_4H_10[/tex]) has 3 C-C bonds in the carbon chain and 10 C-H bonds
What is alkane?Alkanes are saturated hydrocarbons. This means that their carbon atoms are joined to each other by single bonds.
Based on the diagram, butane is considered to be an alkane. It not only contains single covalent bonds, but also has carbon and hydrogen atoms present in its structure.
When comparing both structures to one another, isobutane is a branched chain, while butane is a linear chain.
Learn more about alkane here:
https://brainly.com/question/4260635
#SPJ2
What is the definition of a scientific theory
A) A method of learning that emphasizes reason as the way to understand the world.
B) A brief statement that summarizes past observations and predicts future ones.
C) A model that explains the underlying reasons for observations and laws.
D) The equivalent of a scientific opinion which others may disagree with.
E) None of these.
Answer:
The correct answer to the following question will be Option C.
Explanation:
The theory seems to be the context within which findings are explained as well as possible predictions are made. This theoretical perspective discusses the factors behind the results as well as the laws.Theories have been used in scientific knowledge to give wide interpretations to accommodate observed facts in case the root reason is still yet to be found as well as characterized.So that Option C will be the right answer.
the wavelength of a light wave whose frequency 5.0x 10^9 s^-1 is
Answer:
wavelength = 6 cm .
Explanation:
frequency given = 5 x 10⁹ .
wavelength = velocity of light / frequency
= 3 x 10⁸ / 5 x 10⁹
= .06 m
= 6 cm
In an ecosystem, why can only one species fill an ecological niche?
Answer:
Explanation:es porque las especies con nichos idénticos tienen las mismas necesidades, lo que significa que competirían exactamente por los mismos recursos.
Can someone please help me with this question
Answer:
the second one I think...
Answer:
The answer is the first one.
Acceleration is the change of velocity
Velocity is another term for speed with direction.
The density was of a solution of sulfuric acid is 1.285g/cm3 and it is 38.08% (by weight) acid. How many millimeters of the acid solution do you need to supply 125 grams of sulfuric acid?
Answer:
255.5cm³
Explanation:
A solution that is 38.08 % by weight has 38.08g of sulfuric acid per 100g of total solution. Thus, mass of solution you need to obtain 125g is:
125g H₂SO₄ × (100g solution / 38.08g H₂SO₄) = 328.3g of solution
As density of the solution is 1.285g / cm³, the volume of 328.3g is:
328.3g × (1cm³ / 1.285g) = 255.5cm³
The diagram shows the setup of an experiment. The observations of the experiment are listed in the table below the diagram. A beaker filled three-fourths with a liquid labeled colorless silver nitrate solution is shown. A small strip is shown inside the beaker. The strip is labeled copper strip. The title of the image is Experimental Setup. Experimental Observations Observation Description 1 Copper strip became thinner 2 Gray particles were deposited on the edge of the strip Which of the following is the correct explanation for one of the given observations? (4 points) Observation 2 is a result of nitrate ions moving into the solution. Observation 2 is a result of silver ions moving into the solution. Observation 1 is a result of copper atoms losing two electrons. Observation 1 is a result of silver atoms losing one electron.
Answer:
The answer is Observation 1 is a result of copper atoms losing two electrons.
Explanation:
The electrons result in the color change of the copper strip, causing the gray particles to join onto the metal.
Answer:
C
Explanation:
Observation 1 is a result of the copper atoms losing two electrons. It came out as the right answer.
Difference between rapid combustion and spontaneous combustion.
Answer: The difference between rapid combustion and spontaneous combustion...
Explanation:
Rapid combustion is a form of combustion, otherwise known as a fire, in which large amounts of heat and light energy are released, which often results in a flame.Whereas spontaneous combustion is the ignition of organic matter (e.g. hay or coal) without apparent cause, typically through heat generated internally by rapid oxidation.
NEED HELP
What is the temperature in kelvin of a gas if it is allowed to expand from 1.50 L to 4.50 L? The initial temperature is 10.0°C and pressure is constant throughout the change. Which equation should you use?
Answer:
Explanation:
V1/T1 =V2/T2 at constnant pressure
Answer:
c
Explanation:
I NEED HELP PLEASE, THANKS SO MUCH! :)
Solids, liquids and gases are the three most commonly accepted phases of matter. Explain the properties of each phase, including their relative energy.
Answer:
Here's what I get
Explanation:
The molecules of a substance attract each other.
They are also in constant motion.
Their kinetic energy increases with the temperature.
1. Solids
If the temperature is low enough, the molecules will have little kinetic energy.
They will not be able to escape the attractions of their neighbours, so they will be fixed in place in a crystalline array.
All they can do is vibrate about their position in the array.
The substance will be a solid.
2. Liquids
If the temperature is higher, the molecules will have enough kinetic energy to slide past each other, but not enough to escape the attractions of nearby molecules.
The substance will be a liquid.
3. Gases
If the temperature is high enough, the molecules will have enough kinetic energy to escape from the surface and fly off into space.
The molecules will on average so far apart that they won't feel the attractions of others.
When they do collide, they will have energy to bounce off each other rather than stick together.
The substance will be a gas.
An elements mass number is made up of the number of ____ in the nucleus.
protons and neutrons
electrons and neutrons
protons and electrons
atoms and molecules
Answer:
The answer is protons and nuetrons
Explanation:
