Bas +
PtF2 →
BaF2 +
Pts
Need to balance it

Answer:

1.345.0

Explanation:

Hope this helpssss

Answer:i think its d not sure tho

Explanation:

Cost-effective definition: producing good results without costing a lot of money. E.g: that machine is very cost effective, it made 200 shirts with only a dollar.

Time effective definition: how well time was used. E.g that machine is very time-effective, it made 200 pants in one hour!

Would appreciate brainly <3

Answer:

C

Explanation:

Organic compounds are the compounds which are made only from carbon and hydrogen. The correct option is option D that is hydrocarbons are organic chemical compounds that consist of carbon and hydrogen.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

There are two types of compound covalent compound and ionic in chemistry, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Hydrocarbons are organic compound. Hydrocarbon can have linear chain structure, ring structure or branched structure.

Therefore,  hydrocarbons are organic chemical compounds that consist of carbon and hydrogen. The correct option is option D.

To learn more about chemical compound, here:

https://brainly.com/question/26487468

#SPJ5

Answer:

C

Explanation:

The answer is C, because nitrogen is in purple, and oxygen is in blue, and in NO2 you have 2 oxygen atoms.

Answer:

0.00132moles

Explanation:

1000ml of NaOH contain 0.110 moles

12ml of NaOH contain (12*0.110)/1000 moles

= 0.00132 moles

The mass of steam required to raise the temperature of water is 3.5 g.

The given parameters;

The molar mass of Benzene = 78.11 g/mol

The molar mass of water = 18 g/mol

The number of moles of the Benzene is calculated as follows;

[tex]n = \frac{47.6}{78.11} = 0.61 \ mole[/tex]

The mass of steam required is calculated as follows;

heat lost by steam = heat absorbed by benzene

[tex]\frac{m}{18} \times 40.7 \times 10^3 = 47.6(1.63)(30-5.5) \ + \ 0.61 \times 9.87 \times 10^3\\\\2261.11 m = 7921.61\\\\m = \frac{7921.61}{2261.11} \\\\m = 3.5 \ g[/tex]

Thus, the mass of steam required to raise the temperature of water is 3.5 g.

Learn more here:https://brainly.com/question/14963365

Answer:

umm

Explanation:

matter makes up everything. everything is matter

the more matter an object has the more mass It has

Answer:

A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products. The properties of the products are different from those of the reactants.

I hope this helps.

Answer:

473 ml.

Explanation:

In gallons it’s equal to 0.125

Answer:

Michal Faraday 19th century

Answer:

Acetone has been used as the active ingredient in nail polish remover.

Answer:

Ionization enthalpy

Explanation:

that should be right

In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.

Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.

Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:

[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]

Next, we multiply each anion's oxidation number by the subscript, to obtain the following:

[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]

Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.

Learn more:

Answer:

ty sa pointd

[tex]pH = -\log[H^{+}] \\\\\implies \log[H^{+}] = -pH\\\\\implies [H^{+}] = 10^{-pH}\\\\\implies [H^{+}] = 10^{-4.83} = 0.000015[/tex]

Balanced:

2NaOH + CO2 → Na₂CO₃ + H₂O

Explanation:

To balance an equation, the amount of atoms on each side must be equal.

Atom Count on Reactant Side:

Atom Count On Product Side:

As you see, to simply balance the equation, put the 2 in order for the atom count on the reactant side to be equal to the product side. The 2 will add one more of each atom so that its the same as the product side.

Answer:

Explanation:

D is the correct answer

Answer:

This is a picture of it hope this helps!

The Lewis structure along with bonds for ethene (C₂H₄) is drawn below-

A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule.

The shared pairs of electrons are drawn as lines between atoms, while lone pairs of electrons are drawn as dots next to atoms.

They also display the total number of lone pairs present in each of the atoms that constitute the molecule.

Learn more about Lewis structure, here:

https://brainly.com/question/29603042

#SPJ6

Answer:

Brass is an alloy, and either a "solid solution".

Alloys in general may be solid solutions or they simply be mixtures

Explanation:

Answer:

see the above attachment.

Explanation:

hope this helps you.

Answer:

B.

Explanation:

Hope this helpssss

<33

Answer:

-85 °C

Explanation:

O and S are in the same group( Group 16). Since S is below O it's atomic mass is higher than O. So molar mass of H2S is higher than H2O. The strength of Vanderwaal Interactions ( London dispersion forces) increases when the molar mass increases. However, only H2O can form H bonds with each other. This is because electronegativity of O is higher than S and therefore H in H2O has a higher partial positive charge than H of H2S.

H bond dominate among these 2 types of forces so the strength of attractions between molecules is higher in H2O than H2S. Therefore more energy should be supplied for H2O to break inter

molecular forces and convert from solid to liquid state than H2S. So mpt of H2O must be higher than that of H2S.

Answer:

the lowest point of the wave is called Trough

Answer:

Trough is the correct answer

Explanation:

The highest part of the wave is called the crest. The lowest part is called the trough.

Work is said to be done if the force applied to a body causes the body to move through a distance.

Student B used more work and power

Workdone = Force * Distance

For student A:

Force = 3N

distance = 5meters

Time taken = 10 secs

Workdone by Student A = 3 * 5

Workdone by student A = 15Nm

Power used up = workdone/time

Power used up = 15/10

Power used up = 1.5 Watts

For student B:

Force = 6N

distance = 5meters

Time taken = 5 secs

Workdone by Student A = 6 * 5

Workdone by student A = 30Nm

Power used up = workdone/time

Power used up = 30/5

Power used up = 6 Watts

This shows that student B used more work and power

Learn more here: https://brainly.com/question/6701368

Answer:

what's the question?

Explanation:

I'll help

Answer: Atomic number

Explanation:

I hope this helps you!

Answer:

It is an unstable form of a chemical element that releases radiation as it breaks down and becomes more stable.

Answer:

you hear

Explanation:

beautiful hear can be wonderful day in your life so to be rotations is not a big deal