The amount of potential energy the block contains is 2,822.4 Joules
Given the following data:
Mass of block = 12 kgHeight of platform = 24 meters.We know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex].
To determine the amount of potential energy the block contains:
Mathematically, potential energy (P.E) is given by the formula;
[tex]P.E = mgh[/tex]
Where:
m is the mass of object.g is the acceleration due to gravity.h is the height of an object.Substituting the parameters into the formula, we have;
[tex]P.E = 12 \times 9.8 \times 24[/tex]
Potential energy (P.E) = 2,822.4 Joules
Read more: https://brainly.com/question/23153766
What is the acceleration of an elevator that weighs 5200 kg with a force of 35 N ?
Answer:
0.007 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{35}{5200} = 0.006730 \\ [/tex]
We have the final answer as
0.007 m/s²Hope this helps you
two objects are sitting 6m apart, one object has a mass of 100kg and the other has a mass of 200kg. what is the gravitational attraction between them
a girl on a bridge throws a rock straight down at -12.5 m/s. it hits the ground 38.4 m below. How much time did it take?
The acceleration of both the rocks is only due to the gravitational force acting on them. Even though the speed of thrown rock would be greater than that of dropped rock, the acceleration of both the rocks would be g downwards.
Answer:
1.80
Explanation:
38.4=-12.5(a)-1/2(-9.80)(a)^2
a= acceleration
^2 is the exponent
What is the number of the of significant figures in 2.50400-.pliz, help me l will mark you the brainest.(⊙_◎)
Answer:
Number of Significant Figures: 6
The Significant Figures are 2 5 0 4 0 0
Explanation:
Non-zero digits are always significant which are in this case 2,5,4, and Any zeros between two significant digits are significant and final zero or trailing zeros are significant therefore making the entire digit significant.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The number of significant figures in 2.50400 is ~
[tex] \boxed{6}[/tex]what tool had allowed scientists to learn about the characteristics of eaths layers???
Answer:
seismic waves
Explanation:
i think thats the answer
Muốn biểu diễn vectơ lực chúng ta cần phải biết các yếu tố gì
Một đại lượng vectơ là một lực. Đại lượng vectơ là đại lượng có cả độ lớn và hướng, như chúng ta đã dạy trong phần trước. Bạn phải xác định cả độ lớn (kích thước hoặc số) và hướng của lực tác dụng lên một vật thể để mô tả hoàn toàn nó.
Guys plz i need those answers as soon as possible
9) a) formula = h(ρ)g by default g=9.8m/s²
Pressure = 2×1000×9.8 = 19600Pa
b)
A chemist is studying an unknown substance and could break the substance into its elemental components only by using chemical means. Based on this observation, how should the unknown substance be classified?
A. impure substance
B. solution
C. mixture
D. pure substance
The answer is D
I took the quiz lol
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
Electric current can be measured. It is a rate. What does that mean?
Question 3 options:
The amount of current that passes a certain point in a certain amount of time
The amount of energy available that could be used
The strength of power used by something plugged into a wall
How bright a light will burn when plugged in
Answer:
a
Explanation:
cuz im smart ;)
People who drink coffee are more likely to develop cancer
Answer:
The answer is False
Which wave has the longest wavelength?
Answer:
A Wave red
Explanation:
Answer:
Answer: Wave E
Explanation:
Why because if you put each in a strait line it would have been longer
hope it helps
Surface ocean currents are generated MOSTLY by A) wind. B) tides. C) water density. D) the Coriolis effect.
Answer:
I think it's D) the Coriolis Effect
Explanation:
Answer: THE ANSWER IS D) the Coriolis effect.
Explanation: I GOT A 100 ON THE TEST
PLEASE ANSWER THIS RIGHT ASAP
What is the correct definition of energy?
A: chemical changes
B: force × distance
C: both kinetic and potential energy
D: the ability to do work or cause change
Answer:
D: The ability to do work or cause change.
Explanation:
Energy can be defined as the ability to do work. We apply energy in basically everything we do in life, energy is needed to walk or move from one position to another, it is required to eat and do other basic things of life. The body system converts the food that is being consumed into energy, this energy can be switched from one form to another.
There are various forms of energy which include solar energy, wind energy, electrical energy, mechanical energy, kinetic energy, potential energy, etc. This form of energy can be converted from one form to another but cannot be destroyed.
Hope this helps :)
What kind of force could cause this ball to not be at rest anymore, or cause it to move?
Answer:
friction
Explanation
Answer:
Friction
Explanation:
What force prevents an object at rest?
Sliding Friction While static friction keeps an object at rest, sliding friction slows down an object that slides. If you push an object across a room, you notice the sliding friction between the bottom of the object and the floor. You have to keep pushing to overcome the force of sliding friction.
8) If a dog is running at 25 feet per second, how far will he travel after I minute of running? Efe runs for 30 minutes at a speed of 40 miles per hour, how far will run? 10) Turbo the Snail moves across the ground at a pace of 12 feet per day If the garden is 48 feet away, how many days will it take for the snail to get there?
Estimate under what set of conditions it is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment.
When the experimental measurements diverge at very low values of the voltages. When the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100. When there is a finite current at Voltage
V = 0
Diffusion will have influence on current - voltage curve in the working electrode which is ionization detector.
The estimation under set of conditions that is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment will be:
When the experimental measurements diverge at very low values of the voltageswhen the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100When there is a finite current at Voltage V = 0Where
i = electric current
I = saturated current
V = voltage supplied
The curve expected will therefore give exponential curve from positive to negative domain because of the diffusion of ions from different directions
Learn more here: https://brainly.com/question/23985719
Each box weighs 10lb. The coefficient of static friction between box A and box B is 0.24, and the coefficient of static friction between box B and the inclined surface is 0.3. What is the largest angle for which box B will not slip
The largest angle for which box B will not slip is 16.7⁰.
The given parameters:
weight of box, W = 10 lbcoefficient of static friction between box A and box B, [tex]\mu_s_1[/tex] = 0.24coefficient of static friction between box B and the inclined surface, [tex]\mu_s_2[/tex] = 0.3The frictional force between box A and box B is calculated as;
[tex]F_f_1= \mu_s_1 (mg)[/tex]
The frictional force between box B and inclined surface is calculated as;
[tex]F_f = \mu_s_2 (2mg) cos(\theta)[/tex]
The net force on the boxes that results in no movement is calculated as;
[tex](2mg) sin(\theta) - F_f= 0\\\\(2mg) sin(\theta) = F_f\\\\(2mg) sin(\theta) = \ \mu_s_2 (2mg) cos(\theta)\\\\ sin(\theta) = \mu_s_2 cos(\theta)\\\\\mu_s_2 = \frac{sin(\theta)}{cos(\theta)} \\\\\mu_s_2 = tan(\theta)\\\\\theta = tan^{-1} (\mu_s_2)\\\\\theta = tan^{-1} (0.3)\\\\\theta = 16.7 \ ^ 0[/tex]
Thus, the largest angle for which box B will not slip is 16.7⁰.
Learn more about coefficient of static friction here: https://brainly.com/question/25050131
A scientist fills a container with sea water. The container has dimensions 30 cm x 30 cm x 40 cm The density of sea water is 1020 kg/mº. Calculate the mass of the sea water in the container.
Answer:
30600kg
Explanation:
density=m/v make v subject of the formula
Definition of Speed?
speed- the rate something moves or operates
Can I have brainlist please
The Speed are distance covered by the object in unit time.The S.I unot of speed is metre per second written as m/sec.It is a scalar quantity.
Speed=Distance/TimeAverage speed=Total distance covered/Total time takenThe speed is measured in metres per second ( ms- ¹ )
Where denoted by s
The distance travelled is measured in metres (m) and denoted by d
t is the amount of time spent and measured in seconds s
Explanation:There are Two Types of Speed are :Uniform Speed: When the distance travelled by a body is equal in equal interval of time then the speed is uniform. Non-uniform Speed: When the distance travelled by a body is unequal in an equal interval of time then the speed is known as non- uniform speed.There are four different forms of speed are : If an object travels the same distance in the same amount of time, it is said to be moving at a uniform speed.When an object travels a different distance at equal intervals of time, it is said to be moving at variable speed.The Average speed is the average speed determined by the ratio of the total distance travelled by an object to the entire amount of time it took to travel that distance.The speed of an object at any given moment when it is travelling at a variable speed is referred to as the object's instantaneous speed.Know more:The Discover of the Speed is Galileo Who was the Discover the speed as the distance covered per unit of time.Speed is measured as the ratio of distance to the time in which the distance was coveredThe dimensional formula of speed is:M ⁰ L ¹ T -¹ The measurement of speed in vehicles, speedometers are used. To measure the distance covered odometers are used. The Speed can also be calculated with the help of a graph. The Distance-time graph helps in understanding the speed of an object.An instrument to measure immediate speed is a speedometer.186,282 miles per second is another way to write the speed of light.In dry air, the speed of sound is 343.2 meters per second.a girl runs once around a circular track with a radius of 100m at speed of 10m/s.
calculate her displacement
Answer:
0 m
Explanation:
Displacement is the shortest distance from one ppont to another. Here, the girl returns to the same spot after running. Hence, displacement is 0 m.
NO LINKS! What are the definitions of initial horizontal velocity and initial vertical velocity? Please help! This like is my 10th time asking this question because many people have been scamming me...
Answer:
Additionally, the initial horizontal velocity may be calculated by measuring the diameter d of the ball and dividing the result by the amount of time t required for the ball to pass across the photogate. Vo = d/t is the formula.
Initial vertical velocity is the vertical component of the initial velocity: v 0 y = sin 0 sin 0 = (30.0 m/s) sin 45° = 21.2 m/s
Explanation:
Hope it helps:)
1. if the work done to move a box to a distance of 6 metres equals 120 joules. calculate the force
2. Calculate the potential energy of a book with a mass of 1.5 kg placed on top of a shelf with a height of 2 m.
(Knowing that the acceleration due to gravity = 10 m/s2
).
3. What is meant by?
The potential energy of an object = 20 joules.
Explanation:
1. W = F x D
F = W/D
F = 120/6 = 20Newton
2. P. E = mgh
P. E = 1.5x10x2 = 30Joules
3. It means that the energy the body possesses at that point is 20Joules
if acceleration due to gravity is 10m/s², what will be the potential energy of a body of mass 2 kg kept at a height of 5 meter ?
Answer:
50J
Explanation:
Ep = mgh
Here,
m = 1kg; g = 10 m/s2; h = 5m
So, Ep = 1kg*10m/s2*5m
= 50J
So, the potential energy is 50J (Ans).
How far from the center of the earth is the center of mass of the earth moon system?.
Answer:
With a typical distance of 384,400 kilometers separating Earth and the moon's centers, that works out to a center of mass that is roughly 379,700 kilometers from the moon's center and about 4,700 kilometers from Earth's. Explanation:
In the pie chart below, which of the following represents the amount of Earth's surface covered by water?
A only
B only
B and C
D only
Answer:
A
Explanation:
If a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s, what is the velocity of the person as seen by someone not moving (watching the train going by)
A-45 m/s North
B-50 m/s South
C-55 m/s North
D-100 m/s South
The velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South. I can therefore conclude that none of the option given is correct.
Given that a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s.
That means the person is running relatively to the velocity of the train. Since the train and the person are moving in the same direction, the relative velocity seen by an observer watching the train going will be the addition of both the train and the person in the direction of the train.
That is,
Relative velocity = 50 + 5
Relative velocity = 55 m/s South.
Therefore, the velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South.
I can therefore conclude that none of the option given is correct.
Learn more here: https://brainly.com/question/14636414
PLEASE HELP!!!!!
How does the law of conservation of energy apply to an object rolling down different surfaces?
Answer:
it states that energy can either be gained or lost but it only changes its form.
Explanation:
for example:as a ball is still on the table it posses a potential energy of 100j and a k.e of 0j,as it falls it gains k.e so the midpoint the p.e is equal to the k.e (50j equally) as it approches the ground it completely gains k.e (100j) and the p.e is 0j.
total energy is 100j so it has been converted from p.e to k.e.
hope u have understood.
3.
If the specific heat of iron = 0.46 J/g Cº, how much heat is needed to warm 50 g of
iron from 20° C to 100° C?
Answer:
1.84 kJ (kilojoules)
Explanation:
A specific heat of 0.46 J/g Cº means that it takes 0.46 Joules of energy to raise the temperature of 1 gram of iron by 1 Cº.
If we want to heat 50 g of iron from 20° C to 100° C, we can make the following calculation:
Heat = (specific heat)*(mass)*(temp change)
Heat = (0.46 J/g Cº)*(50g)*(100° C - 20° C)
[Note how the units cancel to yield just Joules]
Heat = 1840 Joules, or 1.84 kJ
[Note that the number is positive: Energy is added to the system. If we used cold iron to cool 50g of 100° C water, the temperature change would be (Final - Initial) or (20° C - 100° C). The number is -1.84 kJ: the negative means heat was removed from the system (the iron).
Déterminer la charge de noyau d’atome d’oxygène en coulomb C
Answer:
determine a large mam I have no idea
