Select the correct answer.
In a given chemical reaction, the energy of the products is greater than the energy of the reactants. Which statement is true for this reaction?
A. Energy is absorbed in the reaction.
B. Energy is released in the reaction.
C. No energy is transferred in the reaction.
D. Energy is created in the reaction.
E. Energy is lost in the reaction.

The Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order. C

The Munich procedural model is a design that illustrates several opportunities regarding the order in which design process and stages beyond mere iteration should take.

A procedural model commonly used for development is the V-model.

Hence, the Munich Procedural Model is a simple design model that uses the concepts define, optimize, and develop solutions iteratively and in any order.

Learn more about procedural designs here:

https://brainly.com/question/22654163

#SPJ1

The problem is not found here but a possible experiment might be to measure the amount of product from a chemical reaction.

An experiment is a procedure used to verify a working hypothesis obtained by applying the scientific method.

Experimental variables that can be tested include, for example, temperature, amount of product from a chemical reaction, etc.

In conclusion, the problem is not found here but a possible experiment might be to measure the amount of product from a chemical reaction.

Learn more about experimentation here:

https://brainly.com/question/17274244

#SPJ1

Answer: Decide whether they have designed the best possible product.

Answer: B and E are True

Explanation:

Because Fe has a higher oxidation potential than H2, H+ can oxidize it.

[tex]$\begin{array}{llllll}\mathrm{Fe} & \rightarrow & \mathrm{Fe}^{2+} & +2 \mathrm{e}- & \mathrm{E}^{0}=0.44 \mathrm{~V} \\ \mathrm{H} & \rightarrow & \mathrm{H}^{+} & + & \mathrm{e}^{-} & \mathrm{E}^{0}=0 \mathrm{~V}\end{array}$[/tex]

Ni can reduce Br2 because the reduction potential of Ni is more than Br2.

[tex]\mathrm{Ni}^{2+}+2 \mathrm{e}^{-} \rightarrow \mathrm{Ni}^{-} \quad \mathrm{E}^{0}=-0.25 \mathrm{~V}\\2 \mathrm{Br}^{-} \quad \rightarrow \mathrm{Br}_{2}+2 \mathrm{e}^{-} \quad \mathrm{E}^{0}=-1.087 \mathrm{~V}$[/tex]

Answer: a = 2 ; f = 5 ; b = 2 ; g = 2 ; c = 2 ; h = 2 ; d = 4 ; i = 5 ; e = 3 ; j = 7

Explanation: Some rules to follow while calculating sig figs is

1. If a number like 4500 is present, only two sig figs are counted, but none of the zeros are, but if 4500. has a decimal point present, then you should count all the numbers available.

2. If a number like .0005 is present, only count 5 as a sig fig, however if the number is .00050, count the 0 after the 5 in this example (this would then have two sig figs.

When 1 mole of Zn and 2 mole of O₂ reacts togethor, It will produce 1 mole of ZnO as O₂ is excess reagent and Zn will act as Limiting reagent and thus it limits the amount of product formed.

Limiting reagents are the substances that are completely consumed first in a chemical reaction.

Given ;

Given equation ;

2Zn + O₂ --> 2ZnO

As according to given chemical equation,

2 moles Zn of reacts with 1 mole of O₂ to produce 2 moles of ZnO.

Therefore,

1 mole of Zn will require 0.5 mole of O₂.

But,

the given amount of O₂ is 2 mole which is excess

Hence,

Zn here will act as the Limiting reagent, According to which the amount of product formed will be decided.

Therefore,

If 2 mole Zn produces : 2 moles of ZnO (According to given balanced equation)

Thus,

1 mole of Zn will produce = 2/2 x 1

                                          = 1 mole of ZnO

Hence, When 1 mole of Zn and 2 mole of O₂ reacts togethor, It will produce 1 mole of ZnO as O₂ is excess reagent and Zn will act as Limiting reagent and thus it limits the amount of product formed.

Learn more about Limiting reagent here ;

https://brainly.com/question/11848702

#SPJ1

Answer:

Combination reaction

This reaction is a combination reaction because calcium oxide and water combine to create calcium hydroxide as the only result.

An inorganic substance called calcium hydroxide has several uses. It is also known as slaked lime, and limewater is the name of its aqueous solution.

Calcium hydroxide has the chemical formula Ca in both its composition and structure (OH)

2

and it has a 74.09 g/mol molar mass.

The calcium metal cation is linked to two hydroxide anions in this ionic molecule. Calcium hydroxide has a polymeric structure in its solid state, which is made possible by hydrogen bonds between the layers.

The mineral portlandite, a naturally occurring but seldom type of calcium hydroxide, is present in various volcanic and metamorphic rocks.

In order to make calcium hydroxide for use in industry, calcium oxide (lime or quicklime) is reacted with water.

CaO + H

2

O → Ca(OH)

2

On lesser scales, it may also be produced through the reaction of aqueous calcium chloride and sodium hydroxide.

Physical characteristics: It has a melting point of 580 °C and can be found as white powder or colorless crystals with a density of 2.21 g/cm3.

Chemical characteristics: Water may rather easily dissolve calcium hydroxide. It partly dissolves in water to create limewater, a moderately basic solution. Ca(OH)2 solution or limewater

salts when combined with acids, and it can corrode various metals, including aluminum. The process of carbonatation, which produces calcium carbonate from limewater and carbon dioxide, is advantageous:

Ca(OH)2+ CO2→ CaCO3+ H2O

Uses: Calcium hydroxide is used in a wide range of industrial processes, including the production of Kraft paper, water and sewage treatment, the production of ammonia, and pH adjustment. Additionally, it is a crucial component of mortars, cement, and plaster. It may be used in the food business for a variety of purposes, including pH correction, calcium fortification, digestion help, and baking soda replacement because it is a relatively non-toxic and gentle base.

Calcium hydroxide is not poisonous at low doses and poses no safety risks. However, inhaling, eating, or coming into touch with the aqueous calcium hydroxide solution at greater concentrations might result in lung damage, chemical burns, blindness, or serious skin irritation.

[tex]\quad \huge \quad \quad \boxed{ \tt \:Answer }[/tex]

[tex]\qquad \texttt {Observe a natural phenomenon}[/tex]

____________________________________

[tex] \large \tt Explanation \: : [/tex]

At first scientists/researchers observe a natural phenomenon. after enough observation, they make predictions why that phenomenon is happening and the reasons that lead to that particular phenomenon. then they generate scientific hypothesis to explain that phenomenon and after getting enough data they develop tests and perform experiments. And check the results they get and at last based on the results they conclude what actually is happening.

Answered by : ❝ AǫᴜᴀWɪᴢ ❞

Answer:

Ba(OH)2(aq) + H2SO4(aq) ----> BaSO4(s) + 2H2O(l)

Answer:

According to me end point is the end of a reaction

Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.

Electroplating is a way of electrolysis, where a thin layer of metal is used to plate a determined object. It is a kinda process to purify a material you want.

The anode contains the metal you want to plate with, in this case, the Ag.

The anode contains the half-reaction of oxidation so:

Ag(s) → Ag ⁺ (aq)  +  e⁻

In the cathode, you have the spoon, which it takes place the half-reaction of reduction:

Ag ⁺ (aq)  +  e⁻  →  Ag(s)

The electrolytic cell, where the redox reaction takes place, must be filled with a AgNO₃ solution.

Silver from the anode gets dissolved to reach the cathode, where the spoon will be plated.

Learn more about the electroplating here:

https://brainly.com/question/20112817

#SPJ1

Answer:

Inhalation (via the respiratory tract)Absorption (via mucous membranes such as the eyes) Ingestion (via the gastrointestinal tract)

Explanation:

The opening where an infectious disease enters the host's body such as mucus membranes, open wounds, or tubes inserted in body cavities like urinary catheters or feeding tubes.

Answer:

Quadruple

Explanation:

Answer:

A

Explanation:

Answer: There is a very large percentage of C-12.

Explanation:

The atomic mass is must closer to that of C-12 than of C-13, meaning that there is a much larger percentage of C-12.

V cube = 2.2³ = 10.648 cm³

V Pt atoms = 0.75(75%) x 10.648 = 7.986 cm³

Part 1

mass of a single Pt atom = 3.24 x 10⁻²² g

mass Pt atoms  = ρ x V = 21.45 g/cm³ x 7.986 cm³ = 171.3 g

the number of Pt atoms = 171.3 : 3.24 x 10⁻²² = 5.287 x 10²³

Part 2

4/3πr³=7.986 cm³

r = 1.24 cm = 1.24 x 10¹⁰ pm

The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option

A rate law shows how the rate of a chemical reaction depends on reactant concentration.

For a reaction such as aA → products, the rate law generally has the form

rate = k[A]ⁿ,

where,

Typically, increased concentrations of reactants increases the speed of the reaction, because there are more molecules colliding and reacting with each other.

Hence , The rate law uses the molar concentrations of reactants to determine the reaction rate. Hence, option (C) is the correct option

Learn more about rate law here ;

https://brainly.com/question/4222261

#SPJ1

A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side with a plus sign between the entities in both the reactants and the products and an arrow that points towards the products, and shows the direction of the reaction. The coefficients next to the symbols and formulae of entities are the absolute values of the stoichiometric numbers. The first chemical equation was diagrammed by Jeen Beguin in 1615.

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus and minus signs.

Hope this helps you!

Answer:

Explanation:

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Molecular polarity refers to the unequal distribution of electrical charges in the atoms of a molecule.

This unequal distribution leads to the generation of molecular poles (positive and negative) at the ends of the chemical bonds.

In conclusion, modeling is very useful for predicting molecular polarity because chemical bonds among different atoms are generated to equal electrical charges.

Learn more about molecular poles here:

https://brainly.com/question/18649956

#SPJ1

The electrons are arranged in different orbitals, at different energy levels and sublevels.

An atomic orbital is a function describing the location and wave-like behavior of an electron in an atom.

This function can be used to calculate the probability of finding any electron of an atom in any specific region around the atom's nucleus.

Following are the sublevel with the maximum number of electrons that can be accommodated by it ;

Therefore, S-Subshell has 2 electrons, P-subshell has 3 electrons, d-subshell has 10 electrons and f-subshell has 14 electrons.

Learn more about Subshells here ,

https://brainly.com/question/19221869

#SPJ1

Answer:

chuma ya ndoshi.............

Explanation:

.

kwenda ukalale .............

Answer:

6PbO +O2 --> 2Pb3O4

Explanation:

The question is incomplete I assume it is

PbO + 02 - Pb304

176.980176 g of glucose ([tex]C_6H_{12}O_6[/tex]) are contained in 555 mL of a 1.77 M glucose solution.

A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

[tex]Molality = \frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]

[tex]1.77 M = \frac{Moles \;solute}{0.555 L}[/tex]

mole solute = 0.98235 g/mol

[tex]Moles = \frac{mass}{molar \;mass}[/tex]

[tex]0.98235 g/mol = \frac{mass}{180.16 g/mol}[/tex]

mass = 176.980176 g

Hence, 176.980176 g of glucose ([tex]C_6H_{12}O_6[/tex]) are contained in 555 mL of a 1.77 M glucose solution.

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

The concentration of sodium chloride in the solution is 5.72% (weight/volume percent).

Weight/volume percent concentration (w/v) expresses the amount of solute (in grams) dissolved in a given volume of solution (in milliliters). Specifically, it is defined as the weight of the solute divided by the volume of the solution, multiplied by 100.

To calculate the weight/volume percent concentration, we need to determine the mass of NaCl per volume of the solution.

First, we need to convert the volume of the solution from milliliters (mL) to liters (L):

67.8 mL = 0.0678 L

Next, we calculate the concentration of NaCl in grams per liter (g/L):

Concentration = Mass of solute ÷ Volume of solution

Concentration = 3.88 g ÷ 0.0678 L

Concentration = 57.2 g/L

Finally, we convert the concentration to weight/volume percent by multiplying by 100:

Weight/volume percent = Concentration x 100

Weight/volume percent = 57.2 g/L x 100

Weight/volume percent = 5.72%

Therefore, the concentration of NaCl in the solution is 5.72% (weight/volume percent).

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

Answer:

boiling water

Explanation:

boiling water produces more severe burns

For all three questions, we will use the fact that

1) For 175 mL of solution at 0.203 M, this means that:

Considering the hydrochloric acid solution, if we have 0.035523 mol, then:

2) If there is 20.3 mL = 0.0203 L, then:

This means that the molarity of the diluted solution is:

3) If we need 1.50 L of 0.700 M solution, then:

Considering the 9.36 M acid solution, from which we need 1.05 mol of perchloric acid from,

Answer:

The Red Circles: Liquid, Blue and Yellow Circles: Solid, and Purple Circles: Gas

Explanation:

Should be it based on the picture and given information.

Answer:

36.3375 g

Explanation:

C. Double replacement

cations and anions switch places