Answer:
A
Explanation:
The electrostatic force and strong nuclear force are opposite forces. The electrostatic force causes the repulsion beteween the positively charged protons in the nucleus but the strong force keeps the nucleus glued together but overcoming the electrostatic force. They would both increase upon the addition of a proton or radioactivity will result.
True or false? the electric field produced by a uniform, infinite plane of charge does not depend on the distance from the plane.
True, the electric field produced by a uniform, infinite plane of charge does not depend on the distance from the plane.
What is electric field?Electric field is the region of space at which electric force is felt.
E = kq/r²
where;
r is the distance of the chargeat infinite plane, r → ∞, and E = 0
Thus, the electric field produced by a uniform, infinite plane of charge does not depend on the distance from the plane.
Learn more about electric field here: https://brainly.com/question/14372859
#SPJ1
Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample that Gerry is looking at?
The atoms have spread out from each other.
The atoms are sliding past each other.
The atoms have no particular pattern.
The atoms are vibrating in place.
i know it is c
here is the answer
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m. How long does it take the car to cover this distance? Show all work leading to the answer including the data, equation, substitution and the final answer with units for full credit.
Answer:
2.24 seconds
Explanation:
xf = xo + vo t + 1/2 at^2
45 = 0 + 15 t + 1/2 (4.5) t^2
2.25 t^2 + 15t - 45 = 0 Quadratic formula shows t = 2.24 seconds
The car takes approximately 2.25 seconds to cover a distance of 45.0 meters under the given conditions of constant acceleration.
Given data:
Initial velocity (u) = 15.0 m/s
Acceleration (a) = 4.50 m/s²
Distance (s) = 45.0 m
We can use the kinematic equation to solve for time (t) when the car covers a certain distance under constant acceleration:
S = ut + 1/2at²
Where:
s = distance
u = initial velocity
a = acceleration
t = time
Plugging in the given values:
45.0 = 15.0t + 1/2 m/s²t²
2.25t² +15t - 45 = 0
t = 2.25sec and -8.92sec
Since time cannot be negative in this context, we discard the negative solution.
To know more about distance
https://brainly.com/question/27914071
#SPJ3
give two examples of contact force and non contact force
Answer:
Explanation:
The two examples of contact forces are frictional force and applied force. The two examples of noncontact forces are gravitational force and magnetic force.
When two or more capacitors are connected in series across a potential difference.
Explanation:
1. the potential difference across the combination is the algebraic sum of yhe potential differences across the individual capacitors
2. the equivent capacitance of the combination is less than the capacitance of any of the capacitors..
Please help: when lorenzo was growing up, his family did not have access to health care. now that he is a father and has access to health care through his work, he wants to make sure he does all he can to promote the health of his own children. how will access to health care help promote a healthier start in his children's lives? how will this promotion of health affect disease prevention for these children? why is it important for lorenzo to establish and implement health maintenance for his family members of all ages? in what ways can he access health services for his entire family?
Answer:
first answer:He can promote healthier start in the children's life by trying to avoid what he encounter when he has no access to health care.
you plan to use a slingshot to launch a ball that has a mass of 0.025kg
From the calculations, the force required is 0.437 N.
What is force?The term force is defined a the product of mass and acceleration. The force is required to move the sling the required distance.
If mass = 0.019 kg and acceleration = 23 m/s2 then we know that F = ma
It then follows that the required force is;
F = 0.019 kg * 23 m/s2= 0.437 N
Missing parts
You plan to use a slingshot to launch a ball that has a mass of 0.019 kg. You want the ball to accelerate straight toward your target at 23 m/s2. How much force do you need to apply to the ball?
Learn more about force:https://brainly.com/question/13191643
#SPJ1
Assuming a current is flowing, what increases the strength of the magnetic field of a coiled electrical wire?.
Answer:The amount of current flowing
Explanation:this derives from amperes law of maxwell’s equations. It’s easiest to see in differential form. The curl of the magnetic field is proportional to the current plus the change (time derivative) in electric field
two examples of hydraulic brake
Answer:
1). Brake pedal or lever
2). A pushrod also called an actuating rod
Sonam and Wangchuk are taking part in a long jump event during their school's annual sports day. Sonam ran a few distances before taking the jump while Wangchuk jumped without running. Who will jump furthest? Justify your answer.
Answer:
Sonam will jump further than wangchuck
Which of the objects around you is following Newton's first law of motion?
The object which follows Newton's first law of motion around me is; my scientific calculator.
What is the Newton's first law of motion?The concept which describes objects as forever stationary except acted upon by external forces can be attributed to.the Newton's first law of motion. The postulation of the law is that; An object remains at rest if at rest, or if in motion, remains in motion at a constant velocity unless acted on by a net external force. Hence, except acted upon by an external force(myself), my calculator will remain at rest.
Read more on laws of motion?
https://brainly.com/question/10454047
#SPJ12
The objects around us that obeys newton's first law of motion are
A book placed on the top of a table,A moving car,A standing fan,A building.Newton's first law of motionNewton's first law of motion states that every object will continue to be in its state of rest on remain in uniform motion except it is acted upon by an external force.
Newton's first law of motion is also called the law of inertia
Examples of newton's first law of motion are
A book placed on the top of a tableA moving car,etc.
Hence, The objects around us that obeys newton's first law of motion are
A book placed on the top of a table,A moving car,A standing fan,A building.Learn more about newton's first law of motion here: https://brainly.com/question/10454047
#SPJ12
8. in a hall experiment, a current of 25 a is passed through a long foil of ag, which is 0.1 mm thick and 3mm long. calculate the hall voltage produces across the width by a flux of 1.4 w/m2. if the conduction of ag is 6.8x10mho/m. estimate the mobility and hall coefficient.
The mobility and hall coefficient willl be 57.7 ×10⁻⁴ and 29.41 ×10⁻⁶ v.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
Given data;
Electric current,I= 25 A
Thickness = 0.1 mm
Length = 3 mm
Flux = 1.4 w/m²
The charge density is found as;
[tex]\rm \rho =- \frac{1}{R_H} \\\\ \rho = 0.119 \times 10^{11} C/m^3[/tex]
The value of the hall voltage is;
[tex]\rm V_H = BVd \\\\ V_H = B \frac{I}{\rho dt} d \\\\ V_H = \frac{BI}{\rho t } \\\\ V_H = \frac{0.14 \times 25 }{0.119 \times 10^{11} \times 0.1 \times 10^{-3}} \\\\ V_H = \frac{3.5 }{0.119 \times 10^7} \\\\ V_H = 29.41 \times 10^{-6} \ v[/tex]
The mobility of electrons is;
[tex]\rm \mu_e = \frac{\rho}{n_e}\\\\ \mu_e = \frac{6.848 \times 10^7}{13.5 \times 10^{-30}\times 1.607 \times 10^{-19}} \\\\ \mu_e = 57.7 \times 10^{-4}[/tex]
Hence the mobility and hall coefficient willl be 57.7 ×10⁻⁴ and 29.41 ×10⁻⁶ v.
To learn more about the electric current refer to the link;
https://brainly.com/question/2264542
#SPJ1
A boy throws a ball vertically up it returns the ground after 10 seconds find the maximum height reached by the ball
Answer:
Approximately [tex]122.625\; {\rm m}[/tex] (assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex], the ball was launched from ground level, and that the drag on the ball is negligible.)
Explanation:
Let [tex]v_{0}[/tex] denote the velocity at which the ball was thrown upward.
If the drag (air friction) on the ball is negligible, the ball would land with a velocity of exactly [tex](-v_{0})[/tex]. The velocity of the ball would be changed from [tex]v[/tex] to [tex](-v_{0})\![/tex] (such that [tex]\Delta v = (-v_{0}) - v_{0} = (-2\, v_{0})[/tex]) within [tex]t = 10\; {\rm s}[/tex].
Also because the drag on the ball is negligible, the acceleration of the ball would be [tex]a = -g = -9.81\; {\rm m\cdot s^{-2}}[/tex]. Thus:
[tex]\Delta v = a\, t = 10\; {\rm s} \times (-9.81\; {\rm m\cdot s^{-2}}) = -98.1\; {\rm m\cdot s^{-1}}[/tex].
Since [tex]\Delta v = (-2\, v_{0})[/tex]:
[tex]-2\, v_{0} = \Delta v = -98.1\; {\rm m\cdot s^{-1}[/tex].
[tex]\begin{aligned}v_{0} &= \frac{-98.1\; {\rm m\cdot s^{-1}}}{-2}= 49.05\; {\rm m \cdot s^{-1}}\end{aligned}[/tex].
The ball reaches maximum height when its velocity is [tex]v_{1} = 0\; {\rm m\cdot s^{-1}}[/tex]. Apply the SUVAT equation [tex]x = ({v_{1}}^{2} - {v_{0}}^{2}) / (2\, a)[/tex] to find the displacement [tex]x[/tex] between the original position (ground level, where [tex]v_{0} = 49.05\; {\rm m\cdot s^{-1}}[/tex]) and the max-height position of the ball (where [tex]v_{1} = 0\; {\rm m\cdot s^{-1}}[/tex].)
[tex]\begin{aligned}x &= \frac{(0\; {\rm m\cdot s^{-1}})^{2} - (49.05\; {\rm m\cdot s^{-1}})^{2}}{2 \times (-9.81\; {\rm m\cdot s^{-2}})} \\ &\approx 122.625\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
I turn a glass upside down, trap the air in it by putting it in water, and then i take the glass down to 10 metres/33 feet. The air space would
The air space would be half the size it was at the surface.
What is airspace?It should be noted that airspace means the portion of the atmosphere controlled by a country that's above its territory.
Based on the information given, the The air space would be half the size it was at the surface.
Learn more about air on:
brainly.com/question/636295
#SPJ12
when you rub neutral objects
electrons can be knocked loose from one object and picked up by the other. The object that gains electrons becomes negatively charged, while the object that loses electrons becomes positively charged.
b gained electrons
define density and give its SI unit
Answer:
Density is defined as mass per unit volume. its SI unit is: kg/m³
Explanation:
Answer:
Density is defined as mass per unit volume. its SI unit is: kg/m³
Explanation:
from answer above
the mechanical advantage of a simple machine is 3 and its velocity ratio is 4 find its efficiency
Answer:
75%
Explanation:
Efficiency=MA/VR*100
=3/4*100
=0.75*100
=75%
A ball dropped onto a trampoline returns to the same height after the rebound.
a) Describe the energy change of the ball from the point of release to the top of the rebound
b) What can you say about the energy of the ball at the point of release compared with at the top of the rebound?
a)The ball's potential energy changes as it moves from the release point to the top of the rebound.
b)The ball's potential energy is at its highest and rests when it is in the top position.
What is potential energy?The potential energy is due to the virtue of the position and the height. The unit for the potential energy is the joule.
The potential energy is mainly dependent upon the height of the object.
Potential energy = mgh
The kinetic energy of the body is due to the virtue of motion.
According to the Law of Conservation of Energy, energy can neither be created nor destroyed but can be transferred from one form to another.
The total energy is the sum of all the energies present in the system. The potential energy in a system is due to its position in the system.
A ball dropped onto a trampoline returns to the same height after the rebound.
Hence, the ball's potential energy changes as it moves from the release point to the top of the rebound. When the ball is at the top position the potential energy is maximum and the ball is at rest.
To learn more about the potential energy, refer to the link;
https://brainly.com/question/24284560
#SPJ1
by considering action-reacton forces,identify why water rises up a thin capillary tube
The forces of attraction between water molecules and the glass walls and within the molecules of water themselves are what enable the water to rise in a thin tube immersed in water.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
Force is defined as the product of mass and acceleration. Its unit is Newton.
Surface or interfacial forces lead to capillarity. The forces of attraction between the water molecules and the glass walls and among the water molecules themselves are what causes the water in a thin tube submerged in water to rise.
Hence, the water rises up a thin capillary tube can be explained by Newton's third law.
To learn more about the force refer to the link;
https://brainly.com/question/26115859#SPJ1
#SPJ1
If you float a piece of wood in a container half-full of water that rests on a weighing scale, the weight reading on the scale will
If you float a piece of wood in a container half-full of water that rests on a weighing scale, the weight reading on the scale will increase.
What is Buoyancy?Buoyancy is the force through your fluids or total or submerged bodies. Also known as Archimedes' theorem. The fluid of the direction on the body produces a resultant force but with the direction of the weight, with the opposite direction, upwards.
All material submerged in a liquid under the action of buoyancy, for this reason we have that the value on the scale will be increased with a system of a wood floating in water.
See more about Buoyancy at brainly.com/question/19168433
#SPJ12
Circle the letters of the places where portions of Earths fresh water are located
A. In streams B. In the atmosphere
C. In the oceans D. In lakes
Choose more than one
The portions of Earth's fresh water are located in lakes and streams. The options A and D are correct.
What is freshwater?The freshwater is the one which does not contains any harmful chemical and saltiness.
The oceans contains salt water and the lakes and the streams have fresh water.
So, the option A and D are correct.
Learn more about freshwater.
https://brainly.com/question/1295668
#SPJ1
Suppose the resistance of a copper wire is 1.05 ohms at 30°C. Find the temperature at which the resistance becomes 1.50 ohms.
Suppose the resistance of a copper wire is 1.05 ohms at 30°C. the temperature is mathematically given as
T=139.89
What is the temperature at which the resistance becomes 1.50 ohms.?Generally, the equation for the coefficient of change is mathematically given as
[tex]\mu_k= 0.2+(0.043)3\\\\\mu_k=0.2+(0.043)(4.343)[/tex]
[tex]\mu_k=0.387[/tex]
In conclusion, the Temperature of copper
[tex]R=R_0( 1+ \alpha(T-T1))[/tex]
1.5(1+0.005(T-30))
T=139.89
Read more about temperature
https://brainly.com/question/24238338
#SPJ1
write a beta decay equation for the
transmutation of a radioactive isotope of Rutherfordium, which has 104 protons
and 183 neutrons.
PLS HELP ASAP!!!!
The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above will be,[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]
What is the rate of decay?The reduction in the number of radionuclides per unit time is the rate of decay.
The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has 104 protons and 183 neutrons.
Atomic weight = 104+183 = 287
Atomic number = 104
The beta decay equation is;
[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]
Hence the beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above.
To learn more about the rate of decay refer to the link;
https://brainly.com/question/14486631
#SPJ1
two conducting spheres are touched together
Answer:
I think its either A or B. I’m not really sure, don’t listen to me. Read my explanation and it should help you.
Explanation:
When the two conducting spheres are brought together to touch, it is as though they become one single big conductor and the total charge of the two spheres spreads out across the whole surface of the touching spheres. When the spheres are moved apart again, each one is left with half of the total original charge…
X and Y are two identical conducting spheres separated by a distance d. X has a charge of +6µC and Y has a charge of -2µC. The electric force between them is +F (i.e. attractive). The spheres are touched together and are then returned to their original separation d. What is the new value of the force between them? Any help is greatly appreciated. I assumed that since the net charge should remain the same after, there would be no change in the value of the force, but the answer scheme gives the answer as -F/3…
Perform the following mathematical operation and report answer to the correct number of significant figures 143.6 divided by 21.2
The answer to the correct number of significant figures is 6.774.
What is quotient?When a number(big) divided smaller number, the answer obtained greater than zero is called a quotient.
Divide 143.6 ÷ 21.2
143.6/21.2 = 1436/212
=6.77358
The quotient is rounded to three significant figures after decimal
143.6 ÷ 21.2 = 6.774
Thus, the answer to the correct number of significant figures is 6.774
Learn more about quotient
https://brainly.com/question/27796160
#SPJ1
5. Calculate the area if the force is 368N and the pressure is 28Pa..
The area would be 13.1429 Meter².
Answer:
[tex]\boxed {Area = 13.14 m^{2}}[/tex]
Explanation:
Formula applied :
[tex]\boxed {Area = \frac{Pressure}{Force}}[/tex]
Given :
Force = 368 NPressure = 28 PaSolving :
Area = 368/28Area = 92/7Area = 13.14 m² (approx.)Newton's second law of motion states that Choose one: A. the force of gravity is proportional to the masses of the two objects and the inverse of the square of the distance. B. the acceleration of an object is proportional to the net force acting on it. C. objects have inertia. D. every action has an equal and opposite reaction.
Answer:
B
Explanation:
A racing car has a mass of 1910 kg. The acceleration of gravity is 9. 8 m/s 2. What is its kinetic energy if it has a speed of 109 km/h? answer in units of j.
Question 16 of 25
Which of the following best describes an alternating current?
A. A circuit that has both series and parallel components
B. Charge that moves in a single direction
C. Charge that jiggles back and forth very quickly
D. A circuit that has only series or only parallel components
SUBMIT
Answer:
it is c
Explanation: i just did it
What is the peak value of a sine wave whose VAV value is 15V?
The peak value of a sine wave whose VAV value is 15V is 21. 21
What is a peak value?A peak value is simply known as the highest or maximum value reached in one cycle by an alternating quantity.
The formula for peak value is given as;
peak value = Voltage * √2
Voltage = 15V
Peak value = 15 * √ 2 = 15 * 1. 4142 = 21. 21
Thus, the peak value is 21. 21
Learn more about rms value here:
https://brainly.com/question/9623597
#SPJ1
