In summary, the default OSPF cost for any link with a bandwidth of 100 Mb/s or greater is 1. This is because high-speed links are considered to be more efficient and reliable for routing traffic, and therefore have a lower cost in OSPF.
The OSPF (Open Shortest Path First) is a link-state routing protocol that calculates the shortest path to a destination network based on the cost of the links between the routers. The cost of a link in OSPF is determined by the bandwidth of the link. The higher the bandwidth, the lower the cost and the more desirable the link is for routing traffic.
In OSPF, the cost of a link is calculated as the reference bandwidth divided by the actual bandwidth of the link. The reference bandwidth is a configurable value that represents the maximum bandwidth of a link in the network. By default, the reference bandwidth is set to 100 Mb/s, which means that a link with a bandwidth of 100 Mb/s or greater will have a cost of 1. This makes high-speed links more desirable for routing traffic, as they have a lower cost and are therefore considered to be more efficient and reliable.
Learn more about bandwidth here:
https://brainly.com/question/13440320
#SPJ11
the web server software accepts ____ requests from web browsers connected to the internet.
The web server software accepts HTTP requests from web browsers connected to the internet.
HTTP (Hypertext Transfer Protocol) is the primary protocol that is used to transfer data from a web server to a web browser. When a user requests a web page by typing the URL into their browser or clicking a link, the web browser sends an HTTP request to the server, which then responds with an HTTP response. This exchange allows the user to receive and view the requested web page. Other protocols like HTTPS, FTP, and SMTP are also used for specific purposes in web communications, but HTTP is the most common protocol used to transfer data between web servers and browsers.
You can learn more about HTTP at
https://brainly.com/question/30984161
#SPJ11
which of the following reduces the demand on your computer as it plays back a video? a) the contrast b) a bookmark c) added narration d) a codec
The option that reduces the demand on your computer as it plays back a video is the codec.
A codec (option d) is a software or hardware component that compresses and decompresses digital video files. It reduces the demand on your computer by compressing the video data into a smaller size for storage or transmission. When playing back a video, the codec allows your computer to efficiently decode and display the compressed video data, reducing the processing power and resources required. By using a codec, the video playback becomes smoother and consumes fewer system resources, enabling your computer to handle the video playback more efficiently.
In contrast, the contrast (option a) refers to the difference in brightness between the lightest and darkest areas of an image and does not directly impact the demand on your computer. A bookmark (option b) is a saved reference to a specific point in a video but does not affect the computer's demand during playback. Added narration (option c) refers to additional audio commentary and does not directly relate to reducing the demand on your computer.
Learn more about codec here;
https://brainly.com/question/32024297
#SPJ11
language that is open to several interpretations should never be used by a competent communicator. T/F
(C++)Which of the following statement assigns the values stored in x to the first element on an array, ary?
a) ary = x;
b) ary = x[0];
c) ary = x[1];
d) ary[0] = x;
e) ary[1] = x;
The correct statement that assigns the values stored in x to the first element on an array, ary is option d) ary[0] = x;.
This is because the syntax ary[0] refers to the first element in the array, and the equal sign assigns the value of x to that element. Option a) ary = x; assigns the entire array to the value of x, which is not what the question is asking for. Option b) ary = x[0]; assigns only the value at the first index of x to the entire array, not just the first element. Option c) ary = x[1]; assigns only the value at the second index of x to the entire array, not the first element. Option e) ary[1] = x; assigns the value of x to the second element of the array, not the first.
learn more about array here:
https://brainly.com/question/30757831
#SPJ11
What safety hazard might occur if a partially filled aerosol can is exposed to excessive heat?
explosion
lethal voltage potential
breathing hazard
lead poisoning
The safety hazard that might occur if a partially filled aerosol can is exposed to excessive heat is an explosion. Option A is the answer.
This is because the heat can cause the pressure inside the can to increase, leading to a rupture of the can and the release of the contents with great force, which can result in an explosion.
Aerosol cans are typically designed to contain gases or liquids under high pressure, and when exposed to heat, the pressure inside the can increases, which can exceed the strength of the can, causing it to rupture. To avoid this hazard, it is important to store aerosol cans in cool and dry places, away from heat sources such as direct sunlight or hot surfaces. It is also important to dispose of partially filled or damaged aerosol cans properly to prevent them from becoming potential hazards. Option A (explosion) is the correct answer.
You can learn more about safety hazard at
https://brainly.com/question/30275814
#SPJ11
if you restart a process using the process explorer utility, what will the new parent of that process be?
The new parent of the restarted process using the Process Explorer utility will be the same as the original parent process.
The parent process of a given process is the process that created it. When a process is started, it is assigned a parent process ID (PPID) which corresponds to the ID of the process that spawned it. This relationship between parent and child processes is important because it allows for communication and coordination between processes.
When you restart a process using the Process Explorer utility, it terminates the original process and launches a new instance of it. Since Process Explorer initiates this new instance, it becomes the parent process of the restarted process.
To know more about Process Explorer visit:-
https://brainly.com/question/30318979
#SPJ11
which class of wireless access point (wap) has everything necessary to manage clients and broadcast a network already built into its functionality?
The class of wireless access point (WAP) that has everything necessary to manage clients and broadcast a network already built into its functionality is the standalone or autonomous WAP.
What is the standalone or autonomous WAP?The standalone or autonomous WAP, is a type that operates independently and typically includes features like client management, network broadcasting, and configuration options.
This makes it a self-contained solution for establishing and managing wireless networks without the need for additional equipment or software.
Learn more standalone or autonomous WAP on:
https://brainly.com/question/15137625
#SPJ4
pressing [f4] allows you to format text just like the format painter.
T/F
The statement is false because pressing F4 does not allow you to format text just like the Format Painter.
The F4 key is commonly used to repeat the last action performed in various software programs, while the Format Painter is a tool specifically designed to copy and apply formatting from one text selection to another. To use the Format Painter, you can find it in the Home tab of the Ribbon in programs like Microsoft Word or Excel.
Click on the Format Painter icon, then click on the formatted text you want to copy, and finally click on the text you want to apply the formatting to.
Learn more about format text https://brainly.com/question/29496361
#SPJ11
people in developing countries who have yet to connect to the internet will most likely do so through: a. laptops. b. libraries. c. mobile phones. d. desktops.
The most likely way for people in developing countries to connect to the internet for the first time would be through: c. mobile phones.
The most likely way that people in developing countries who have yet to connect to the internet will do so is through mobile phones. This is because mobile phones have become increasingly affordable and accessible, even in remote areas where there may not be access to libraries or desktop computers.
Mobile phone networks have expanded rapidly in developing countries, making it easier for people to access the internet through their phones. While laptops and desktops may be used in some cases, they are generally less accessible and affordable for most people in developing countries.
To know more about internet visit:
https://brainly.com/question/14823958
#SPJ11
what two log files are used by older versions of unix and newer version of linux to store log information?
The two log files used by older versions of Unix and newer versions of Linux to store log information are the and explanation files.
File is used to store general system information, such as startup and shutdown events, while the explanation file is used to store more detailed information about system processes and user activities. These log files are essential for system administrators to diagnose and troubleshoot issues that may arise on the system. In older Unix systems, the syslog and messages log files were primarily used to store system log information.
In newer Linux systems, journalctl and rsyslog are used for logging purposes. Journalctl is part of the systemd suite and provides a more structured and centralized logging system, while rsyslog is an enhanced syslog daemon that offers advanced filtering and output capabilities. Both of these log systems can be accessed using their respective command-line utilities journalctl and rsyslog.
To know more about newer versions visit :
https://brainly.com/question/30370439
#SPJ11
a pending promise can become fulfilled with a value or rejected with a reason (an error). When either of these occur, the handlers associated by the promise's ___________ method are called.
When a Promise is resolved with a value or rejected with a reason, the handlers associated with the Promise's then() and catch() methods are called.
A Promise in JavaScript represents the eventual completion (or failure) of an asynchronous operation and its resulting value. A Promise can be in one of three states: pending, fulfilled, or rejected. When a Promise is in a pending state, it means that the operation is still in progress, and the eventual outcome is not yet known. However, when the Promise becomes fulfilled with a value or rejected with a reason (an error), the handlers associated with the Promise's then() and catch() methods are called. The then() method is used to attach callbacks that are called when the Promise is resolved successfully with a value. The catch() method is used to attach callbacks that are called when the Promise is rejected with a reason. These methods can be chained together to handle both resolved and rejected states of a Promise. When a Promise is fulfilled with a value, the callbacks attached to the then() method are called with the resolved value as the argument. When a Promise is rejected with a reason, the callbacks attached to the catch() method are called with the rejected reason as the argument.
In summary, the then() and catch() methods are used to handle the resolved and rejected states of a Promise respectively. These methods are called when the Promise is fulfilled with a value or rejected with a reason, allowing developers to take appropriate actions based on the outcome of the asynchronous operation.
Learn more about JavaScript here:
https://brainly.com/question/16698901
#SPJ11
why did the authors normalize the l1 copy number by comparison to both hervh and sata?
The authors likely normalized the L1 copy number by comparison to both HERVH and SATA in order to account for potential variations in the total genomic DNA content across different samples.
Normalizing to HERVH and SATA, two well-characterized repetitive elements in the human genome, allows for a more accurate comparison of L1 copy number across different samples and individuals. HERVH and SATA serve as internal controls, as they should be present in a consistent number of copies in all samples, regardless of variations in total DNA content.
Additionally, normalizing to both HERVH and SATA may provide more robust results than normalizing to only one repetitive element. This is because different genomic regions may exhibit different levels of amplification or deletion during genomic DNA extraction and/or PCR amplification, which can lead to skewed results if only one internal control is used.
By normalizing to two different internal controls, the authors can more confidently assess the L1 copy number variations across their sample set.
Overall, normalizing L1 copy number to both HERVH and SATA allows for a more accurate and reliable assessment of L1 retrotransposition in human cells.
Learn more about genetic analysis:https://brainly.com/question/31074855
#SPJ11
which step should be performed first when deleting a vlan that has member switch ports?
When deleting a VLAN that has member switch ports, the first step that should be performed is to remove the VLAN from the member ports.
This can be done by using the "no" command followed by the VLAN ID on each port.
Once the VLAN has been removed from all member ports, the VLAN itself can then be deleted using the "no vlan" command followed by the VLAN ID.
It is important to note that deleting a VLAN with active member ports can cause disruptions to network connectivity, so it is recommended to first communicate with any affected users and plan the deletion during a maintenance window to minimize any potential downtime.
Learn more about VLAN at https://brainly.com/question/30651951
#SPJ11
What symbol is used inside the flip-flop logic symbol near the clock that says data are transferred to the output on the edge of the pulse?
The symbol used inside the flip-flop logic symbol near the clock that says data are transferred to the output on the edge of the pulse is an arrow, either pointing up or down, to indicate the direction of the data transfer.
In digital electronics, a flip-flop is a circuit element that is used to store binary data. It has two stable states and can be switched between them by applying an input signal. The clock signal is used to control the timing of the flip-flop's operation, and the arrow symbol near the clock input indicates the direction of the data transfer. When the arrow points up, it means that the flip-flop will transfer data on the rising edge of the clock pulse. When the arrow points down, it means that the flip-flop will transfer data on the falling edge of the clock pulse. This ensures that the data transfer happens synchronously with the clock signal, which is important for maintaining timing accuracy in digital circuits.
Learn more about clock signal here:
https://brainly.com/question/31971577
#SPJ11
system maintenance must be performed to: a. remove features that none of the users are using b. correct software errors. c. keep programmers employed. d. add new features that have never been requested before.
System maintenance is a crucial task that must be performed regularly to ensure the smooth functioning of a software system. The primary objective of system maintenance is to identify and correct any software errors or bugs that might affect the performance of the system.
It also helps to remove any redundant or unnecessary features that are not being used by the users. This ensures that the system remains lean and optimized, reducing the risk of potential problems.
It is not necessary to add new features that have never been requested before, as this can lead to bloat and unnecessary complexity. However, if there is a genuine need for new features, they should be added through a well-defined process that involves input from stakeholders and end-users.
While system maintenance does keep programmers employed, this should not be the primary reason for performing maintenance. Rather, it should be seen as an investment in the system's longevity and reliability, which ultimately benefits all stakeholders.
To know more about System maintenance visit:
https://brainly.com/question/30456614
#SPJ11
when writing shell scripts and using an if statement to determine whether a set of code should be executed, what is the proper syntax to end the if construct?
When writing shell scripts and using an "if" statement to determine whether a set of code should be executed, the proper syntax to end the "if" construct is to use the "fi" keyword.
Here's a simple example to demonstrate the correct usage:
```
#!/bin/bash
variable=10
if [ $variable -eq 10 ]; then
echo "The variable is equal to 10."
else
echo "The variable is not equal to 10."
fi
```
In this example, we start with a shebang line (#!/bin/bash) to specify the script interpreter. We declare a variable and assign it a value of 10. The "if" statement is then used to check if the variable's value is equal to 10. The syntax "[ $variable -eq 10 ]" is the condition being tested, with "-eq" being the equality operator. The "then" keyword follows, indicating the start of the block of code to execute if the condition is true. If the condition is false, the "else" keyword signifies the alternate block of code to execute. Finally, the "fi" keyword is used to end the "if" construct. This properly structured "if" statement ensures your shell script executes the intended code block based on the given condition.
Learn more about scripts here: https://brainly.com/question/14388018
#SPJ11
On which two routers would a default static route be configured? (Choose two.)
- stub router connection to the rest of the corporate or campus network
- any router where a backup route to dynamic routing is needed for reliability
- edge router connection to the ISP
- any router running an IOS prior to 12.0
- the router that serves as the gateway of last resort
A default static route can be configured on the edge router connection to the ISP and the router that serves as the gateway of last resort.
A default static route is a route that is used by a router to forward traffic to a destination network for which it has no specific route in its routing table. This type of route is commonly used in situations where a router needs to forward traffic to a default gateway or next-hop router that is outside its own network. In particular, a default static route can be configured on the edge router connection to the ISP, where it can be used to forward traffic to destinations outside the local network. Additionally, the default static route can be configured on the router that serves as the gateway of last resort, which is the router that is responsible for forwarding packets to destinations that are not in any of its directly connected networks.
Learn more about destination here: brainly.com/question/32140567
#SPJ11
How many columns can you put in a view? What else can you sort with?
The number of columns you can include in a view depends on the database management system (DBMS) you are using.
However, most modern DBMSs have a high limit for the number of columns in a view, typically ranging from hundreds to thousands. When it comes to sorting in a view, you can sort the result set based on one or more columns. The columns can be sorted in ascending (default) or descending order. Additionally, you can use expressions or functions in the ORDER BY clause to sort the data based on calculated values or criteria.
To know more about database management system,
https://brainly.com/question/20437063
#SPJ11
ted wants to be able to analyze date data in his pivottable by month. what must he do with the date field in his pivottable?
Ted needs to group the date data in his PivotTable by month. To achieve this, he must convert the date field into a month field in his PivotTable settings.
What action should Ted take with the date field in his PivotTable to analyze data by month?To analyze data by month in his PivotTable, Ted should ensure that the date field is set up as a month field by modifying the PivotTable settings accordingly.
To analyze date data in his PivotTable by month, Ted needs to perform the following steps:
Select the date field in the PivotTable.Right-click on the date field and choose "Group" or "Group Field" from the context menu.In the Grouping dialog box, select the "Months" option and click "OK."By grouping the date field by months, the PivotTable will now display the data aggregated and organized by month. This enables Ted to perform month-based analysis and gain insights into trends and patterns over time.
Learn more about PivotTable
brainly.com/question/31580432
#SPJ11
5.2 q2: the control variable of a counter-controlled loop should be declared as to prevent errors.a.int.b.float.c.double.d.any of the above.
The control variable of a counter-controlled loop should be declared as an integer data type to prevent errors. An integer is a whole number without a fractional component, and it is the most appropriate data type for a variable that will be used to count or iterate in a loop.
Declaring the control variable as a different data type, such as a float or a double, could lead to unexpected behavior and errors in the loop. For example, if the control variable is declared as a float and used in a loop that increments by 1, the loop may never terminate because the float variable may not reach the exact value needed to exit the loop.
Similarly, if the control variable is declared as a double, it may use up more memory than necessary, leading to inefficient code. Therefore, it is recommended to declare the control variable as an integer data type in a counter-controlled loop.
To know more about control variable visit:
https://brainly.com/question/29603009
#SPJ11
4.2 q1: which of the following is not an algorithm?a.a recipe.b.operating instructions.c.textbook index.d.shampoo instructions (lather, rinse, repeat).
Shampoo instructions lather, rinse, repeat. shampoo instructions do not have a clear and specific sequence of steps that are universally agreed upon.
An algorithm is a precise set of instructions that can be followed to solve a problem or complete a task. While shampoo instructions do provide a general idea of what needs to be done, they do not provide a specific sequence of steps that must be followed. Therefore, they cannot be considered as an algorithm. I hope this explanation helps .
An algorithm is a step-by-step procedure or a set of instructions to solve a particular problem or perform a task. Let's analyze each option. A recipe This is an algorithm as it provides a sequence of steps to prepare a dish. Operating instructions ,These are also algorithms since they give step-by-step guidance on how to use a device. Textbook index This is not an algorithm, as it is simply a reference tool for finding information within a book, rather than a step-by-step procedure. Shampoo instructions lather, rinse, repeat This is an algorithm, as it outlines a sequence of steps to wash your hair.
To know more about instructions lather visit :
https://brainly.com/question/14446782
#SPJ11
How is Lean UX used in Continuous Exploration?
To validate the return on investment
To create a platform to continuously explore
To automate the user interface scripts
To collaboratively create a benefit hypothesis
Lean UX is used in Continuous Exploration to collaboratively create a benefit hypothesis.
Continuous Exploration is a practice in Agile development that focuses on continuously exploring and understanding customer needs, market dynamics, and emerging technologies to inform product development decisions. Lean UX, which emphasizes iterative design, collaboration, and early validation, is a natural fit for this process. In Continuous Exploration, Lean UX principles and techniques are employed to gather insights, generate ideas, and test assumptions in a rapid and iterative manner. By collaboratively creating a benefit hypothesis, teams can align on the expected outcomes of their explorations and use Lean UX methods to validate and refine those hypotheses through user research, prototyping, and experimentation.
To learn more about hypothesis click on the link below:
brainly.com/question/29798378
#SPJ11
this describes a virtual environment into which you can install and run windows or linux
A virtual machine is a virtual environment that allows you to install and run different operating systems on a single physical machine. This technology provides a flexible and cost-effective solution for businesses and individuals who need to use multiple operating systems simultaneously.
The term that describes a virtual environment into which you can install and run Windows or Linux is called a virtual machine. A virtual machine (VM) is a software-based emulation of a computer system, allowing multiple operating systems to run on a single physical machine.
VMs are commonly used in many industries, such as software development, data centers, and cloud computing, as they offer a cost-effective way to utilize hardware resources while providing greater flexibility and scalability. They are also useful for testing new software or configurations, as they can be easily reset to a previous state or cloned for further experimentation.
To set up a virtual machine, you will need to install a virtualization software such as VirtualBox or VMware on your physical machine. From there, you can create a new VM and choose the operating system you wish to install. Once the VM is up and running, you can install software and run applications as if you were using a physical machine.
Learn more about virtual machine here :-
https://brainly.com/question/31674417
#SPJ11
the st and sc fiber connectors are the most commonly found connectors due to their smaller sizes. T/F
False, while st and sc fiber connectors are both popular in fiber optic networks, they are not necessarily the most commonly found connectors due to their smaller sizes. Other types of fiber connectors, such as LC, FC, and MTP/MPO, are also commonly used depending on the specific application and equipment being used.
Fiber connectors are used to join fibers together or to connect fibers to other devices, such as switches, routers, or transceivers. The choice of connector type depends on factors such as the type of equipment being used, the distance the signal needs to travel, and the bandwidth requirements of the network. ST connectors have a round ferrule and are often used in single-mode applications. SC connectors have a square ferrule and are commonly used in both single-mode and multimode applications. Both types of connectors are easy to install and provide good performance, but they may not always be the best choice for every situation. In summary, while st and sc connectors are popular in fiber optic networks, they are not necessarily the most commonly found connectors. The choice of connector type depends on several factors, and other types of connectors are also commonly used in fiber optic networks.
Learn more about fiber connectors here
https://brainly.com/question/15053963
#SPJ11
If X = 0 and Response = "yes", determine which of the following conditional statements is true.
A) (X == 1) OR (Response == "Yes")
B) NOT (X ==0)
C) (X == 1) AND (Response == "Yes")
D) None of these are true
The correct option is A) (X == 1) OR (Response == "Yes"), as it is the only statement that evaluates to true given the values of X and Response.
Given X = 0 and Response = "yes", we can evaluate each statement as follows:
A) (X == 1) OR (Response == "Yes"): The first part (X == 1) is false, but the second part (Response == "Yes") is true (ignoring the case sensitivity). Since only one part needs to be true for an OR statement to be true, the entire statement is true.
B) NOT (X == 0): Since X = 0, (X == 0) is true. Applying the NOT operator makes this statement false.
C) (X == 1) AND (Response == "Yes"): Both parts need to be true for an AND statement to be true. However, (X == 1) is false, making the entire statement false.
D) This option is incorrect, as option A is true.
Learn more about operator here:
https://brainly.com/question/29949119
#SPJ11
a type of memory that loses its contents if the power is turned off is said to be _____.
A type of memory that loses its contents when the power is turned off is called "volatile memory."
Volatile memory refers to a type of computer memory that requires a continuous power supply to retain its stored data. When the power is turned off or interrupted, the contents of volatile memory are lost. This is in contrast to non-volatile memory, which retains its data even when the power is disconnected. Volatile memory is commonly used as primary storage in computer systems, such as RAM (Random Access Memory). RAM provides fast and temporary storage for actively running programs and data. It allows for quick read and write operations but does not retain information once the power is removed. Volatile memory is essential for running applications and performing tasks in real-time, but it does not provide long-term storage capabilities.
Learn more about volatile memory here;
https://brainly.com/question/31362237
#SPJ11
what command would you enter while in vi command mode to copy an entire line of text
To copy an entire line of text while in vi command mode, you would enter the command "yy". This command is known as "yank" and is used to copy the entire line.
1. Open the file in vi by typing "vi filename" in the terminal.
2. Navigate to the line you want to copy using arrow keys or other navigation commands.
3. Enter command mode by pressing the "Esc" key, if not already in command mode.
4. Type "yy" to copy the entire line.
5. Move the cursor to the desired location for pasting the copied line.
6. Press "p" to paste the copied line below the current line, or "P" to paste above the current line.
Learn more about Commands at:
https://brainly.com/question/25808182
#SPJ11
the main memory of a computer is also called random access memory (ram). T/F
True.the main memory of a computer is also called random access memory (ram).
The main memory of a computer is indeed called Random Access Memory (RAM). It is a type of computer memory that is used to store data that the computer is actively using. RAM allows for fast and random access to the stored data, meaning that any location in the memory can be accessed directly without having to sequentially read through the entire memory. It is volatile memory, which means that its contents are lost when the computer is powered off or restarted. RAM plays a crucial role in determining the overall performance and speed of a computer system, as it is used to temporarily hold data and instructions that are being processed by the CPU.
Learn more about RAM here:
https://brainly.com/question/31946586
#SPJ11
to insert data into an ole object field, use ____ command on the ole’s shortcut menu.
To insert data into an OLE (Object Linking and Embedding) object field, you can use the "Insert Object" command that is available on the OLE's shortcut menu. This command allows you to insert a wide range of objects into your database, such as Microsoft Excel spreadsheets, Adobe PDF files, or even audio and video clips.
The OLE object field is a type of field that can be used in various database programs, including Microsoft Access. It enables you to store and manipulate objects within your database, which can be beneficial for organizing and managing your data in a more efficient way. When you use the "Insert Object" command on the OLE's shortcut menu, you will be prompted to select the type of object that you want to insert. You can choose to create a new object, or you can link to an existing object that is stored outside of your database. Once you have selected your object, it will be inserted into the OLE object field, and you can then manipulate it as needed. Overall, the "Insert Object" command is a powerful tool that allows you to enhance the functionality and usability of your database by incorporating different types of media and data into it. By using this command, you can take advantage of the benefits of OLE object fields and improve your database's efficiency and functionality.
Learn more about OLE here
https://brainly.com/question/10717805
#SPJ11
what is the maximum number of bytes that can be included in a udp payload
The maximum number of bytes that can be included in a UDP payload is 65,507 bytes.
UDP (User Datagram Protocol) is a connectionless protocol that is used for transmitting data over the Internet. It is commonly used for time-sensitive applications such as online gaming and VoIP (Voice over Internet Protocol).
UDP (User Datagram Protocol) is a transport layer protocol that allows data transmission without the need for establishing a connection. The maximum size of a UDP datagram, including the header (8 bytes) and payload, is 65,535 bytes.
To know more about Payload visit:-
https://brainly.com/question/31813578
#SPJ11
