Calculate the pH of a solution prepared by dissolving 1.30 g of sodium acetate, CH 3
COONa, in 50.0 mL of 0.20M acetic acid, CH 3
COOH(aq). Assume the volume change upon dissolving the sodium acetate is negligible. K 2
of CH 3
COOH is 1.75×10 −5
.

Answers

Answer 1

The pH of the solution prepared by dissolving sodium acetate in acetic acid is approximately 3.38, indicating an acidic nature.

To calculate the pH of the solution, we need to consider the equilibrium between acetic acid (CH3COOH) and its conjugate base acetate (CH3COO-) in the presence of sodium acetate (CH3COONa). The dissociation equation for acetic acid is as follows:

CH3COOH ⇌ CH3COO- + H+

- Mass of sodium acetate (CH3COONa) = 1.30 g

- Volume of acetic acid (CH3COOH) = 50.0 mL = 0.050 L

- Concentration of acetic acid (CH3COOH) = 0.20 M

- Ka of acetic acid (CH3COOH) = 1.75 × 10^(-5)

First, we need to determine the moles of acetic acid and sodium acetate:

Moles of acetic acid (CH3COOH) = concentration × volume

                           = 0.20 M × 0.050 L

                           = 0.010 mol

Moles of sodium acetate (CH3COONa) = mass / molar mass

                               = 1.30 g / 82.03 g/mol (molar mass of CH3COONa)

                               = 0.0158 mol

Next, we need to determine the concentration of acetate ions (CH3COO-) in the solution. Since sodium acetate is a strong electrolyte, it completely dissociates into its ions.

Concentration of acetate ions (CH3COO-) = moles of sodium acetate / volume of solution

                                     = 0.0158 mol / 0.050 L

                                     = 0.316 M

Now, we can set up an ICE (Initial, Change, Equilibrium) table to calculate the concentrations of acetic acid and acetate ions at equilibrium:

         CH3COOH  ⇌  CH3COO-  +  H+

Initial:  0.010 M     0.316 M    0 M

Change:   -x          +x         +x

Equilibrium: 0.010 - x   0.316 + x  x

The equilibrium constant expression, Ka, is given by:

Ka = [CH3COO-][H+] / [CH3COOH]

Using the equilibrium concentrations, we can substitute the values into the expression:

1.75 × 10^(-5) = (0.316 + x)(x) / (0.010 - x)

Since the value of x is expected to be small compared to the initial concentration of acetic acid (0.010 M), we can approximate (0.010 - x) as 0.010:

1.75 × 10^(-5) = (0.316 + x)(x) / 0.010

Now, we solve for x. Rearranging the equation:

(0.316 + x)(x) = 1.75 × 10^(-5) × 0.010

0.316x + x^2 = 1.75 × 10^(-6)

Since x is small compared to 0.316, we can approximate 0.316x as negligible:

x^2 = 1.75 × 10^(-6)

Taking the square root of both sides:

x ≈ 4.18 × 10^(-4)

The concentration of H+ ions is approximately 4.18 × 10^(-4) M.

To calculate the pH, we use the formula:

pH = -log[H+]

pH = - log(4.18 × 10^(-4))

pH ≈ -(-3.38)

pH ≈ 3.38

Therefore, the pH of the solution prepared by dissolving 1.30 g of sodium acetate in 50.0 mL of 0.20 M acetic acid is approximately 3.38.

To learn more about solution  Click Here: brainly.com/question/1616939

#SPJ11


Related Questions

32. (12) Predict the 4 products resulting from reaction of the alkene with 1 equivalent of HBr \( (8 \) pts). (b) label the kinetic product ( 2 pts). (c) label the thermodynamic product ( 2 pts \( ) \

Answers

The four possible products that can result from the reaction are 1-Bromoalkane, 2-Bromoalkane, and 1,2-Dibromoalkane. 2-bromoalkane is the kinetic product. 1-bromoalkane is the thermodynamic product.

a. When an alkene reacts with 1 equivalent of HBr, the reaction proceeds through an electrophilic addition mechanism. The alkene undergoes

Markovnikov addition, where the hydrogen atom attaches to the carbon with fewer substituents (the more substituted carbon) and the bromine atom attaches to the carbon with more substituents (the less substituted carbon). The four possible products that can result from this reaction are:

1-Bromoalkane: The hydrogen atom adds to the less substituted carbon of the alkene, and the bromine atom adds to the more substituted carbon. This product is more stable due to the greater alkyl group substitution on the carbon bearing the bromine.

2-Bromoalkane: The hydrogen atom adds to the more substituted carbon of the alkene, and the bromine atom adds to the less substituted carbon. This product is less stable than the 1-bromoalkane due to the lower alkyl group substitution on the carbon bearing the bromine.

1,2-Dibromoalkane: Both hydrogen and bromine atoms add to the same carbon of the alkene, resulting in the formation of a vicinal dibromide.

No reaction: If the alkene is a terminal alkene (having a double bond at the end of the carbon chain), the reaction may not occur as there is no more substituted carbon for the bromine to attach to.

b. The kinetic product is the product that is formed more quickly under the reaction conditions. In this case, the 2-bromoalkane is the kinetic product because the addition of the hydrogen atom to the more substituted carbon occurs faster than the addition to the less substituted carbon.

c. The thermodynamic product is the product that is formed as the most stable product at equilibrium. In this case, the 1-bromoalkane is the thermodynamic product because it is more stable due to the greater alkyl group substitution on the carbon bearing the bromine.

To know more about kinetic products, refer here:

https://brainly.com/question/31643864#

#SPJ11

There are some very small variations in relative isotopic abundances in materials obtained from different natural sources. This is particularly evident in the relative abundances of the isotopes of the element boron. Boron from a particular geological sample is analyzed and found to contain: 10
B(10,012937 amu), 19.815% (numerical abundance) and 11 B(11.009350 amu), 80.185% (numerical abundance) Calculate the average atomic mass of boron obtained from this sample. amu Copyright: Department of Chemistry, Simon Fraser University + O.SFU Chemistry 2000-202z Tries 1/5 Previous Tries

Answers

The average atomic mass of boron obtained from this sample is approximately 10.81 amu.

To calculate the average atomic mass of boron, we need to consider the atomic masses of its isotopes (10B and 11B) and their respective abundances. The formula to calculate the average atomic mass is:

Average atomic mass = (mass of isotope 1 × abundance of isotope 1) + (mass of isotope 2 × abundance of isotope 2) + ...

Plugging in the values for the given sample:

Average atomic mass = (10.012937 amu × 0.19815) + (11.009350 amu × 0.80185)

Average atomic mass ≈ 1.99076 amu + 8.81857 amu

Average atomic mass ≈ 10.80933 amu

Therefore, the average atomic mass of boron obtained from this sample is approximately 10.81 amu.

Learn more about mass here: brainly.com/question/30390726

#SPJ11

How many hydrogen are occupying the axial position of the ring in stable cis 1,2 dibromocyclohexane? 4 3 6 5

Answers

In a stable cis-1,2-dibromocyclohexane, there are 5 hydrogen atoms occupying the axial positions of the ring.

In a cyclohexane molecule, there are two possible orientations for substituents around the ring: axial and equatorial. In the case of cis-1,2-dibromocyclohexane, the two bromine atoms are attached to adjacent carbon atoms, and they both occupy axial positions.

In a cyclohexane ring, there are six hydrogen atoms attached to the carbon atoms. When a substituent is in the axial position, it causes steric hindrance with the neighboring substituents and makes the molecule less stable compared to when the substituent is in the equatorial position.

To minimize steric hindrance and achieve a stable conformation, cyclohexane tends to favor an equatorial orientation for substituents whenever possible. In the case of cis-1,2-dibromocyclohexane, the bromine atoms occupy the axial positions due to the cis configuration.

Therefore, in a stable cis-1,2-dibromocyclohexane, there are 5 hydrogen atoms occupying the axial positions of the ring. The remaining hydrogen atoms occupy the equatorial positions to minimize steric interactions.

To learn more about atoms  Click Here: brainly.com/question/13654549

#SPJ11

If you put 785 grams of C2H6O2 in benzene, how many grams
of
benzene would you have to use to make the boiling point of the
benzene solution to
82.6oC?

Answers

The mass of benzene required to make the boiling point of the benzene solution to 82.6oC is 181.9 g.

The elevation in boiling point (∆T) of a solvent containing a non-volatile solute is proportional to the molality (m) of the solution as well as the proportion of molecules of the solvent that do not participate in the interaction with the solute. This property is defined as the degree of dissociation (α) of the solute in the solution. If 'i' is the number of particles produced by the dissociation of one molecule of the solute, the degree of dissociation is determined using the formula α = 1 − (1/i).The formula to calculate the molality of the solution is given as:

m = n solute/ (m solvent * mass solvent) ………..(1)Where, n solute is the number of moles of the solute, m solvent is the molar mass of the solvent, and mass solvent is the mass of the solvent in the solution.

The formula to calculate the elevation in boiling point is given as: ∆Tb = kb * m ………….(2)Where, kb is the ebullioscopic constant of the solvent and is a measure of the proportion of the solvent molecules that do not participate in the interaction with the solute. Rearranging Eq. (2), we get: m = ∆Tb/kb ……….(3)From Eqs. (1) and (3), we can write: n solute/ (m solvent * mass solvent) = ∆Tb/kb ……(4)Rearranging Eq. (4), we get:

mass solvent = n solute * kb / (m solvent * ∆Tb) ……….(5)Given:

Mass of C2H6O2 = 785 g,

Boiling point of benzene = 80.1 oC,

∆Tb = 82.6 oC – 80.1 oC

= 2.5 oC,

Kb for benzene = 2.53 K kg mol−1,

Molar mass of benzene = 78.11 g mol−1

Moles of C2H6O2 = Mass of C2H6O2 /

Molar mass of C2H6O2= 785 / 62

= 12.66 molFrom Eq. (5),

mass of benzene = n solute * kb / (m solvent * ∆Tb)Therefore, the mass of benzene required to make the boiling point of the benzene solution to 82.6oC is 181.9 g.

To know more about benzene visit:-

https://brainly.com/question/31837011

#SPJ11

Consider the reaction: 2 Na3PO4+ 3 BaCl₂ → Ba3(PO4)2+ 6 NaCl IF 0.500 mol of Na3PO4 reacts with an excess of barium chloride (BaCl₂), how many moles of barium phosphate (Ba3(PO4)3) will be forme

Answers

For the reaction 2 Na₃PO₄ + 3 BaCl₂ → Ba₃(PO₄)₂ + 6 NaCl, 0.250 mol of Ba₃(PO₄)₂ will be formed when 0.500 mol of Na₃PO₄ reacts. The molarity of potassium ions (K+) in the solution containing 0.200 M K₂CO₃ and 0.500 M K₃PO₄ is approximately 2.71 M.

For the given reaction:

2 Na₃PO₄ + 3 BaCl₂ → Ba₃(PO₄)₂ + 6 NaCl

The stoichiometric ratio between Na₃PO₄ and Ba₃(PO₄)₂ is 2:1. This means that for every 2 moles of Na₃PO₄ reacted, 1 mole of Ba₃(PO₄)₂ will be formed.

Given that 0.500 mol of Na₃PO₄ reacts, we can calculate the moles of Ba₃(PO₄)₂ formed:

0.500 mol Na₃PO₄ * (1 mol Ba₃(PO₄)₂ / 2 mol Na₃PO₄) = 0.250 mol Ba₃(PO₄)₂

Therefore, 0.250 moles of Ba₃(PO₄)₂ will be formed.

Molecular equation: 2 Na₃PO₄ + 3 BaCl₂ → Ba₃(PO₄)₂ + 6 NaCl

Ionic equation: 6 Na+ + 2 PO₄³⁻ + 3 Ba²⁺ + 6 Cl⁻ → Ba₃(PO₄)₂ + 6 Na⁺ + 6 Cl⁻

Net ionic equation: 2 PO₄³⁻ + 3 Ba²⁺ → Ba₃(PO₄)₂

For the given solution containing 0.200 M K₂CO₃ and 0.500 M K₃PO₄, we are interested in the molarity of potassium ions (K⁺).

Since K₂CO₃ dissociates into 2 K⁺ ions and K₃PO₄ dissociates into 3 K⁺ ions, we can sum the moles of K⁺ ions from both compounds and divide by the total volume:

Moles of K+ ions = (0.200 M K₂CO₃ * 2) + (0.500 M K₃PO₄ * 3)

               = 0.400 + 1.500

               = 1.900 moles

Total volume = volume of K₂CO₃ solution + volume of K₃PO₄ solution

           = (0.200 L) + (0.500 L)

           = 0.700 L

Molarity of K+ ions = Moles of K⁺ ions / Total volume

                   = 1.900 moles / 0.700 L

                   ≈ 2.71 M

Therefore, the molarity of potassium ions (K⁺) in the solution is approximately 2.71 M.

To know more about the stoichiometric ratio refer here,

https://brainly.com/question/31861063#

#SPJ11

Complete question :

Consider the reaction: 2 Na3PO4+ 3 BaCl₂ → Ba3(PO4)2+ 6 NaCl IF 0.500 mol of Na3PO4 reacts with an excess of barium chloride (BaCl₂), how many moles of barium phosphate (Ba3(PO4)3) will be formed? Write the molecular, ionic and net ionic equations for the reaction: AgNO, (aq) + NaCl (aq) →???? (hint silver chloride is insoluble) A sample of aqueous solution contains 0.200 M K₂CO and 0.500 M K3PO4. What is the molarity of the potassium ions (K) in the solution?

K The common feature of all esters is the presence of a A) C=O group. B) -OH group. C) -C(=O)OH group. D) -C(=O)H group. E) -C(=O)OR group.

Answers

Esters are organic compounds that are widely used in various fields, including flavoring agents, perfumes, and plasticizers.  the correct answer is option (E) -C(=O)OR group.

They can be prepared by reacting an alcohol with a carboxylic acid or acyl chloride in the presence of an acid catalyst, and the common feature of all esters is the presence of a -C(=O)OR group.The esters have the general formula RCOOR', where R and R' can be any combination of carbon and hydrogen atoms.

The C(=O) part of the ester is a carbonyl group, which is characterized by a carbon atom double-bonded to an oxygen atom. On the other hand, the -OR part is called the alkoxy group, which is characterized by an oxygen atom single-bonded to an alkyl group (-R).

To know more about Esters  visit:-

https://brainly.com/question/31326231

#SPJ11

The reaction H 2
O 2
→H 2
O(I)+O 2
( g), is first order. The half-life of the reaction was found to be 16.5 min. If the initial concentration of H 2
O 2
is 0.2500M, (a) How long will it take for the concentration to drop to 0.1800M ? (b) What will be the concentration of H 2
O 2
at t=20 min ?

Answers

(a) It will take approximately 7.29 minutes for the concentration of H2O2 to drop from 0.2500 M to 0.1800 M in the first-order reaction.

(b) At t = 20 min, the concentration of H2O2 will be approximately 0.1079 M in the first-order reaction.

To solve this problem, we need to use the first-order reaction kinetics equation:

ln([A]₀/[A]) = kt

Where:

[A]₀ is the initial concentration of reactant A,

[A] is the concentration of reactant A at time t,

k is the rate constant,

t is time.

[A]₀ = 0.2500 M (initial concentration of H2O2)

[A] = 0.1800 M (desired concentration of H2O2)

(a) We can use the given half-life to find the rate constant (k):

t₁/2 = 0.693/k

16.5 min = 0.693/k

Solving for k:

k = 0.693 / 16.5 min ≈ 0.042 M⁻¹ min⁻¹

Now, we can use the rate constant to find the time required for the concentration to drop to 0.1800 M:

ln([A]₀/[A]) = kt

ln(0.2500 M / 0.1800 M) = 0.042 M⁻¹ min⁻¹ * t

ln(1.3889) = 0.042 M⁻¹ min⁻¹ * t

Using natural logarithm properties, we can solve for t:

t = ln(1.3889) / 0.042 M⁻¹ min⁻¹ ≈ 7.29 min

Therefore, it will take approximately 7.29 minutes for the concentration to drop to 0.1800 M.

(b) To find the concentration of H2O2 at t = 20 min, we can use the same equation:

ln([A]₀/[A]) = kt

ln(0.2500 M / [A]) = 0.042 M⁻¹ min⁻¹ * 20 min

Solving for [A]:

ln(0.2500 M / [A]) = 0.84 M⁻¹

0.2500 M / [A] = e^(0.84)

[A] = 0.2500 M / e^(0.84)

Calculating the concentration [A]:

[A] ≈ 0.2500 M / 2.3198

[A] ≈ 0.1079 M

Therefore, at t = 20 min, the concentration of H2O2 will be approximately 0.1079 M.

To learn more about concentration  Click Here: brainly.com/question/30862855

#SPJ11

on The Early Sorting Endosome Select one: O a. Is an intracellular storage depot O b. Sorts proteins that have been internalised by endocytosis Oc. Has an alkali pH Od. Is a major sight of protein synthesis e. Sorts newly made proteins material that have been delivered directly form During passive tumour targeting, EPR stands for: Select one: a. Elongated Preamble and Retention O b. Enhanced Proprietary Reflux Elegant Proprietary Rotation d Enhanced Permeability and Retention Emancipated Preamble and Rotation.

Answers

1. The Early Sorting Endosome functions as an organelle that sorts proteins that have been internalized by endocytosis.

2- EPR stands for Enhanced Permeability and Retention. The correct option is b.

1- Option (b) correctly identifies the function of the Early Sorting Endosome. This organelle plays a crucial role in the sorting and trafficking of proteins that have been internalized through endocytosis.

It receives the internalized proteins and carries out sorting processes to direct them to their appropriate destinations within the cell. The sorting can involve recycling the proteins back to the cell membrane, targeting them for degradation, or transporting them to other cellular compartments for further processing.

The other options (a, c, d, e) do not accurately describe the function of the Early Sorting Endosome. It is not an intracellular storage depot, it does not have an alkali pH, it is not a major site of protein synthesis, and it does not specifically sort newly made proteins delivered directly from any source.

B- Option (d) correctly expands the abbreviation EPR. EPR refers to Enhanced Permeability and Retention, which is a phenomenon used in passive tumor targeting for drug delivery. The enhanced permeability of tumor blood vessels combined with the impaired lymphatic drainage in tumors allows for increased accumulation of therapeutic agents within tumor tissues. The correct option is d.

This phenomenon takes advantage of the leaky nature of tumor vasculature and the reduced clearance of substances from tumor sites, resulting in improved drug retention and effectiveness in targeting tumors.

The other options (a, b, c) do not accurately represent the expanded form of EPR and are incorrect.

learn more about Cell membrane here:

https://brainly.com/question/13524386

#SPJ11

Choose the pairs of substances that react with each other * stearic acid/palmitic acid glycerol/palmitic acid glycine/hydrogen chloride glycerol/serine lactic acid/hydrogen chloride salicylic acid/hyd

Answers

The pairs of substances that react with each other are stearic acid/hydrogen chloride, glycerol/palmitic acid, and salicylic acid/sodium hydroxide.

1. Stearic acid/hydrogen chloride: Stearic acid (C₁₈H₃₆O₂) is a fatty acid, and hydrogen chloride (HCl) is an acid. When stearic acid reacts with hydrogen chloride, it undergoes an acid-base reaction to form a salt called stearic acid chloride or stearoyl chloride.

2. Glycerol/palmitic acid: Glycerol (C₃H₈O₃) and palmitic acid (C₁₆H₃₂O₂) can react through esterification to form a triglyceride. In this reaction, the hydroxyl groups of glycerol react with the carboxyl groups of palmitic acid, resulting in the formation of a glyceride molecule.

3. Salicylic acid/sodium hydroxide: Salicylic acid (C₇H₆O₃) can react with sodium hydroxide (NaOH) through a base-catalyzed hydrolysis reaction. The hydroxide ion from sodium hydroxide reacts with the carboxyl group of salicylic acid, leading to the formation of sodium salicylate and water.

It is important to note that the other pairs mentioned in the question, such as glycerol/serine, glycine/hydrogen chloride, and lactic acid/hydrogen chloride, do not undergo direct chemical reactions with each other based on their chemical properties.

To know more about Salicylic acid refer here:

https://brainly.com/question/13650518#

#SPJ11

What is the \( \mathrm{pH} \) of the solution formed when \( 125 \mathrm{~mL} \) of \( 0.750 \mathrm{M} \mathrm{NaOH} \) is added to 250. \( \mathrm{mL} \) of \( 0.500 \mathrm{M} \mathrm{HCl} \) ? You

Answers

The pH of the resulting solution is approximately 0.903.

To determine the pH of the resulting solution after mixing NaOH and HCl, we need to calculate the moles of the acid and base and then use the balanced equation to determine the limiting reactant.

From there, we can calculate the concentration of the remaining excess reactant, which will affect the pH.

Let's start by calculating the moles of NaOH and HCl:

Moles of NaOH = Volume (L) × Concentration (M)

= 0.125 L × 0.750 M

= 0.09375 moles

Moles of HCl = Volume (L) × Concentration (M)

= 0.250 L × 0.500 M

= 0.125 moles

The balanced chemical equation for the reaction between NaOH and HCl is:

NaOH + HCl → NaCl + H2O

From the equation, we can see that the stoichiometric ratio between NaOH and HCl is 1:1. Therefore, HCl is the limiting reactant since it has fewer moles (0.125 moles) compared to NaOH (0.09375 moles).

Since HCl is the limiting reactant, it will be completely consumed in the reaction. The remaining excess reactant is NaOH. To find its concentration in the final solution, we need to calculate the moles of NaOH that reacted with HCl and subtract it from the initial moles of NaOH:

Moles of NaOH remaining = Initial moles of NaOH - Moles of NaOH reacted

= 0.09375 moles - 0.125 moles (from the balanced equation)

= -0.03125 moles (negative value indicates excess NaOH)

We have a negative value because the moles of HCl consumed exceeded the moles of NaOH available, leaving an excess of NaOH in the solution.

Now, let's find the concentration of the remaining NaOH:

Volume of final solution = Volume of NaOH + Volume of HCl

= 0.125 L + 0.250 L

= 0.375 L

Concentration of remaining NaOH = Moles of NaOH remaining / Volume of final solution

= (-0.03125 moles) / 0.375 L

= -0.0833 M (negative value indicates excess NaOH)

We have found that the concentration of the remaining NaOH is -0.0833 M, but since concentrations cannot be negative, we consider it to be zero.

Now, we can use the remaining HCl to calculate the concentration of H+ ions in the solution, which will determine the pH.

Since 1 mole of HCl produces 1 mole of H+ ions, the concentration of H+ ions is equal to the concentration of the remaining HCl:

Concentration of H+ ions = Concentration of remaining HCl

= 0.125 M

To find the pH, we can use the formula:

pH = -log[H+]

pH = -log(0.125)

pH ≈ 0.903

To know more about pH refer here

https://brainly.com/question/2288405#

#SPJ11

Lucille, a 9 year old girl, was admitted to the hospital after her mother found her unconscious. Her mother said Lucille had been complaining of a stomach ache earlier in the morning and she seemed very tired so she kept her home from school for the day. There are no known medical concerns and the family's medical history is generally healthy. During the triage, the nurse noted that Lucille's breath had a fruity odor. The lab results are below: Glucose485 mg/dL Serum KetonesPositive Urinalysis All results normal except a positive glucose and ketones result. What is the likely diagnosis of this patient? What symptoms and lab results correlate with that diagnosis?

Answers

The likely diagnosis of this patient is diabetic ketoacidosis (DKA). Symptoms such as stomach ache, tiredness, fruity odor in breath, and the presence of high glucose levels (485 mg/dL) and positive ketones in the lab results are consistent with DKA.

Diabetic ketoacidosis (DKA) is a serious complication of diabetes mellitus, particularly in cases of type 1 diabetes. It occurs when there is a shortage of insulin in the body, leading to high blood glucose levels (hyperglycemia) and the breakdown of fat for energy. This breakdown produces ketones, leading to an accumulation of ketone bodies in the blood and urine.

In this case, the patient Lucille exhibited symptoms such as stomach ache and fatigue, which can be attributed to the high blood glucose levels. The fruity odor in her breath is a characteristic sign of ketone production. The lab results further support the diagnosis, with a high glucose level of 485 mg/dL and positive ketones in the urine.

Taken together, the symptoms of stomach ache, fatigue, fruity breath odor, along with the elevated glucose levels and positive ketones in the lab results, suggest the likely diagnosis of diabetic ketoacidosis (DKA). It is crucial for Lucille to receive prompt medical attention and treatment for this potentially life-threatening condition.

learn more about Diabetic ketoacidosis here:

https://brainly.com/question/29872572

#SPJ11

3. You place 2.80 g of phosphoric acid into a 25.0 mL of a 1.25M sodium hydroxide solution. The molar mass of phosphoric acid =98.00 g/mole, sodium hydroxide =40.01 g/mole and water is 18.02 g/mole. Answer the following questions. (6 points) H 3

PO 4

+3NaOH→3H 2

O+Na 3

PO 4

a. Determine the mass of water that is produced. H 3

PO 4

+3NaOH→3H 2

O+Na 3

PO 4

b. Determine the mass of the reactant that remains after the chemical reaction is complete.

Answers

Explanation:

a)

from the formula you know that

1 mol h3po4 + 3 mol naoh gives 3 moles h2o

you have

[tex] \frac{2.80g}{98 \frac{g}{mol} } = 0.0286mol \: h3po4 \\ 1.25 \times \frac{25ml}{1000 \frac{ml}{l} } = 0.03125 \: mol \: naoh[/tex]

how many moles of h2o will you produce with the reactants you have?

[tex] \frac{1 \: mol \: h3po4}{3 \: mol \: h2o} = \frac{0.0286 \: mol \: h3po4}{x \: mol \: h2o} [/tex]

x mol h2o = 0.0858 mol

[tex] \frac{3 \: mol \: naoh}{3 \: mol \: h2o} = \frac{0.03125 \: mol \: naoh}{x \: mol \: h2o} [/tex]

x mol h2o = 0.03125 mol

one of your reactants gives less moles of h2o , that's your limiting reactant and that means you'll get 0.03125 mol of h2o and not 0.0858 mol

so you'll have

0.03125 mol × 18 g/mol h20 = 0.5625 g h2o

b)

the mass of reactant that remains is your reactant in excess, h3po4

since you'll only produce 0.03125 mol h2o

you'll only consume x moles of h3po4

[tex] \frac{1 \: mol \: h3po4}{3 \: mol \: h2o} = \frac{x \: mol \: h3po4}{0.03125 \: mol \: h2o} [/tex]

0.0104 mol = x mol h3po4

you'll have an excess of h3po4 that won't react

moles used - moles consumed = moles in excess

0.0286 mol - 0.0104 mol = 0.0182 mol

the mass of the reactant that remains is

0.0182 mol × 98g/mol = 1.78g h3po4

The equilibrium constant Kc for this reaction is 5.0. If the equilibrium concentrations of [NO] = 0.10 M, [CINO₂] = 0.15 M, and [CINO] = 0.25 M, what is the equilibrium concentration of NO₂ in M? CINO₂ (g) + NO (g) = NO₂ (g) + CINO (g)

Answers

The equilibrium concentration of NO2 is 0.14 M.

The balanced equation for the reaction is:

CINO2(g) + NO(g) ⇌ NO2(g) + CINO(g)

The given equilibrium concentrations are [NO] = 0.10 M, [CINO2] = 0.15 M, and [CINO] = 0.25 M.

Substituting the values into the equilibrium expression:

Kc = (NO2[CINO]) / (CINO2[NO]) = 5.0

Let the equilibrium concentration of NO2 be x M.

The initial concentrations are [CINO2] = 0.15 M, [NO] = 0.10 M, and [CINO] = 0.25 M.

The change in concentration of NO and CINO2 is -x M.

The change in concentration of NO2 and CINO is +x M.

The equilibrium concentration of CINO2 is (0.15 - x) M.

The equilibrium concentration of NO is (0.10 - x) M.

The equilibrium concentration of CINO is (0.25 + x) M.

Now, substituting the above equilibrium concentrations into the expression for Kc:

5.0 = (NO2[CINO]) / (CINO2[NO])

5.0 = (x × (0.25 + x)) / [(0.15 - x) × (0.10 - x)]

Solving this equation, we get x = 0.14.

The equilibrium concentration of NO2 is 0.14 M.

However, the final answer should include the correct units. Therefore, the equilibrium concentration of NO2 is 0.14 M.

To learn more about equilibrium, refer below:

https://brainly.com/question/30694482

#SPJ11

Please answer all parts of this
question. Include relevent schemes, structure, mechanism and
explanation. Thank you
(i) Show the reaction schemes for generation of ANY TWO different 1,3-dipoles. In your answer, name the types of 1,3-dipole formed, and draw both the 1,3and 1,2-canonical forms for each. (ii) Ozone is

Answers

(i) The two different types of 1,3-dipoles are nitrile imine and azomethine ylide.

(ii) The reaction scheme involves the reaction of ozone with an alkene, leading to the formation of ozonide and subsequent cleavage to yield aldehydes or ketones.

(i) Generation of 1,3-Dipoles:

1. Nitrile Imines: Nitrile imines can be generated by the reaction of an α,β-unsaturated carbonyl compound with a primary amine. The π electrons of the carbonyl compound undergo nucleophilic attack by the amine, followed by rearrangement to form the nitrile imine. The 1,3-canonical form of the nitrile imine consists of a nitrogen atom connected to a carbon-carbon double bond.

2. Azomethine Ylides: Azomethine ylides can be generated by the reaction of an α,β-unsaturated carbonyl compound with a secondary amine. The π electrons of the carbonyl compound attack the nitrogen of the amine, forming a zwitterionic intermediate, which then rearranges to form the azomethine ylide. The 1,3-canonical form of the azomethine ylide consists of a nitrogen atom connected to a carbon-carbon double bond.

(ii) Ozone Reaction:

Ozone (O₃) reacts with an alkene in a cycloaddition reaction called ozonolysis. The reaction proceeds in two steps:

1. Formation of Ozonide: In the first step, the ozone molecule adds to the double bond of the alkene, resulting in the formation of an intermediate called the ozonide. The ozonide contains a three-membered ring with two oxygen atoms and one carbon atom.

2. Cleavage of Ozonide: In the second step, the ozonide undergoes cleavage, usually by a reducing agent such as zinc or dimethyl sulfide. This cleavage generates two carbonyl compounds, which can be aldehydes or ketones, depending on the substitution pattern of the starting alkene.

Overall, the generation of 1,3-dipoles, such as nitrile imines and azomethine ylides, provides versatile synthetic intermediates for the synthesis of various compounds. The ozonolysis reaction with ozone allows for the oxidative cleavage of alkenes, providing access to valuable carbonyl compounds.

To know more about nitrile imine refer here:

https://brainly.com/question/31018245#

#SPJ11

Draw the product(s) of the following reactions. CH3CH₂-CEC-H Y • You do not have to consider stereochemistry. Separate multiple products using the + sign from the dre • You do not have to explicitly draw H atoms. • If no reaction occurs, draw the organic starting material. [Review Topics] /// Y 1. BH3/THF 2. H₂O₂/ aqueous NaOH 2 24 ? - n [ ] >

Answers

The final product is CH3CH2-COOH + HCOOH.

The reaction of CH3CH2-CEC-H with BH3/THF reagent is a hydroboration reaction. The products formed in the reaction are CH3CH2-CH(OH)-CH2CH3. The hydroboration reaction follows an anti-Markovnikov addition, wherein the boron attaches to the less substituted carbon of the alkyne.

Hydroboration of an alkyne in the presence of borane (BH3) is a well-known reaction. This reaction leads to the formation of a trialkylborane intermediate that further undergoes oxidation to produce the corresponding aldehyde or ketone.

Here's the balanced chemical equation representing the hydroboration reaction:

CH3CH2-CEC-H + BH3 → CH3CH2-CH2-CH2B + H3O+ → CH3CH2-CH(OH)-CH2CH3

The second step involves the oxidation of the intermediate with hydrogen peroxide (H2O2) and aqueous sodium hydroxide (NaOH) reagent. The reaction is a basic KMnO4 oxidative cleavage reaction. The products formed in the reaction are carboxylic acids. The oxidation reaction proceeds as follows:

CH3CH2-CH(OH)-CH2CH3 + 2[O] → CH3CH2-COOH + HCOOH + H2O

Here's the balanced chemical equation for the oxidation reaction:

CH3CH2-CH(OH)-CH2CH3 → CH3CH2-COOH + HCOOH + H2O

In the final product, CH3CH2-CH(OH)-CH2CH3 is oxidized to CH3CH2-COOH, and the second product, HCOOH, is produced from H2O2. Therefore, the final product is: CH3CH2-COOH + HCOOH.

To learn more about product, refer below:

https://brainly.com/question/31815585

#SPJ11

C10-16-alkyl glycosides + polyethylene oxide =
can you please help me with the expected result of these
components

Answers

The expected result of combining C₁₀-₁₆ alkyl glycosides and polyethylene is the formation of a mixture or formulation known as alkyl polyglycosides (APGs).

C₁₀-₁₆ alkyl glycosides are nonionic surfactants derived from natural fatty alcohols (alkyl) and sugar molecules (glycosides). These alkyl chains typically contain 10 to 16 carbon atoms. They are known for their mildness, biodegradability, and excellent detergency properties.

Polyethylene oxide (PEO), also known as polyethylene glycol (PEG), is a water-soluble polymer composed of repeating units of ethylene oxide. PEO is often used as a thickening agent, emulsifier, and stabilizer in various formulations.

When C₁₀-₁₆ alkyl glycosides are combined with polyethylene oxide, they can form alkyl polyglycosides (APGs). APGs are a class of nonionic surfactants that exhibit excellent emulsifying, foaming, and cleaning properties. They are commonly used in personal care products, household cleaning formulations, and industrial applications.

The specific properties and characteristics of the resulting APGs will depend on the alkyl chain length (C₁₀-₁₆) and the molecular weight of the polyethylene oxide used..

learn more about polyethylene here:

https://brainly.com/question/29412928

#SPJ11

If a buffer solution is 0.280M in a weak base (K b

=6.4×10 −5
) and 0.440M in its conjugate acid, what is the pH ? If a buffer solution is 0.210M in a weak acid (K a

=8.4×10 −5
) and 0.550M in its conjugate base, what is the pH? Phosphoric acid is a triprotic acid (K a1

=6.9×10 −3
,K a2

=6.2×10 −8
, and K a3

=4.8×10 −13
). To find the pH of a buffer composed of H 2

PO 4


(aq) and HPO 4
2−

(aq), which pK a

value should be used in the Henderson-Hasselbalch equation? pK a1

=2.16
pK a2

=7.21
pK a3

=12.32

Calculate the pH of a buffer solution obtained by dissolving 10.0 g of KH 2

PO 4

( s) and 30.0 g of Na 2

HPO 4

( s) in water and then diluting to 1.00 L. You need to prepare an acetate buffer of pH5.52 from a 0.659M acetic acid solution and a 2.07MKOH solution. If you have 480 mL of the acetic acid solution, how many milliliters of the KOH solution do you need to add to make a buffer of pH5.52? The pK a

of acetic acid is 4.76. Be sure to use appropriate significant figures. A 1.37 L buffer solution consists of 0.252M propanoic acid and 0.120M sodium propanoate. Calculate the pH of the solution following the addition of 0.079 molHCl. Assume that any contribution of the HCl to the volume of the solution is negligible. The K a

of propanoic acid is 1.34×10 −5
.

Answers

(1) 9.15 (2) 4.61 (3) pKa2 = 7.21 (4) approximately 294 mL of the 2.07 M KOH solution needs to be added to the 480 mL acetic acid solution.

(5) 4.47.

1. For the buffer solution with a weak base and its conjugate acid:

Weak base concentration [B] = 0.280 M

Conjugate acid concentration [BH+] = 0.440 M

Kb (base dissociation constant) = 6.4 × 10^−5

Using the Henderson-Hasselbalch equation:

pH = pKa + log([BH+]/[B])

First, let's calculate the pKa:

pKa = -log(Kb) = -log(6.4 × 10^−5) ≈ 4.19

Now, substitute the given concentrations into the Henderson-Hasselbalch equation:

pH = 4.19 + log(0.440/0.280)

pH ≈ 9.15

Therefore, the pH of the buffer solution is approximately 9.15.

2. For the buffer solution with a weak acid and its conjugate base:

Weak acid concentration [HA] = 0.210 M

Conjugate base concentration [A−] = 0.550 M

Ka (acid dissociation constant) = 8.4 × 10^−5

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A−]/[HA])

First, let's calculate the pKa:

pKa = -log(Ka) = -log(8.4 × 10^−5) ≈ 4.08

Now, substitute the given concentrations into the Henderson-Hasselbalch equation:

pH = 4.08 + log(0.550/0.210)

pH ≈ 4.61

Therefore, the pH of the buffer solution is approximately 4.61.

3. For the buffer composed of H2PO4− and HPO42−, which pKa value to use:

pKa1 = 2.16

pKa2 = 7.21

pKa3 = 12.32

In a triprotic acid, there are three ionization steps. The pKa value used in the Henderson-Hasselbalch equation depends on the ionization step being considered. For the buffer composed of H2PO4− and HPO42−, we use the pKa value corresponding to the ionization step of interest.

Since H2PO4− can donate one proton to form HPO42−, we consider the ionization of the second proton. Hence, we use pKa2 = 7.21 for this buffer.

4. To prepare an acetate buffer of pH 5.52:

Acetic acid concentration = 0.659 M

KOH concentration = 2.07 M

Volume of acetic acid solution =

480 mL

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A−]/[HA])

Given pKa for acetic acid = 4.76

Substitute the values into the Henderson-Hasselbalch equation:

5.52 = 4.76 + log([A−]/[HA])

Rearrange the equation:

log([A−]/[HA]) = 5.52 - 4.76 = 0.76

Take the antilog of both sides:

[A−]/[HA] = 10^0.76 ≈ 5.74

Since the acetic acid and acetate ions are in a 1:1 ratio, the concentrations are also in a 1:1 ratio. Therefore, [A−] = [HA] = 0.659 M.

Now, we can calculate the volume of the KOH solution needed:

Let x be the volume of the KOH solution in mL.

(0.659 M) / (0.659 M + 2.07 M) = x / (480 mL + x)

Simplifying the equation gives:

0.659 / 2.729 ≈ x / 480

Solving for x:

x ≈ (0.659 / 2.729) × 480 ≈ 294 mL

Therefore, approximately 294 mL of the 2.07 M KOH solution needs to be added to the 480 mL acetic acid solution to prepare the acetate buffer of pH 5.52.

5. pH calculation after the addition of HCl to the buffer solution:

Propanoic acid concentration = 0.252 M

Sodium propanoate concentration = 0.120 M

K a (propanoic acid dissociation constant) = 1.34 × 10^−5

Moles of HCl added = 0.079 mol

Volume of the buffer solution = 1.37 L

First, calculate the initial moles of propanoic acid and sodium propanoate:

Initial moles of propanoic acid = 0.252 M × 1.37 L = 0.345 mol

Initial moles of sodium propanoate = 0.120 M × 1.37 L = 0.164 mol

Since HCl is a strong acid, it completely ionizes in water, and its moles will be equal to the moles of H+ ions it contributes.

Moles of H+ ions = 0.079 mol

Now, calculate the final moles of propanoic acid and sodium propanoate after the addition of HCl:

Final moles of propanoic acid = Initial moles of propanoic acid - Moles of H+ ions = 0.345 mol - 0.079 mol = 0.266 mol

Final moles of sodium propanoate = Initial moles of sodium propanoate = 0.164 mol

Now, calculate the final concentrations of propanoic acid and sodium propanoate:

Final concentration of propanoic acid = Final moles of propanoic acid / Volume of buffer solution = 0.266 mol / 1.37 L ≈ 0.194 M

Final concentration of sodium propanoate = Final moles of sodium propanoate / Volume of buffer solution = 0.164 mol / 1.37 L ≈ 0.120 M

Using the Henderson-Hasselbalch equation:

pH = pKa + log([A−]/[HA])

Given pKa for propano

ic acid = 1.34 × 10^−5

Substitute the values into the Henderson-Hasselbalch equation:

pH = -log(1.34 × 10^−5) + log(0.120/0.194)

Calculating the logarithms and adding the values:

pH ≈ 4.47

Therefore, after the addition of 0.079 mol of HCl to the 1.37 L buffer solution of propanoic acid and sodium propanoate, the pH is approximately 4.47.


To learn more about buffer solution click here: brainly.com/question/30777612

#SPJ11

How many grams are in 8.13×1023 molecules of CH4 ? Enter the number only, with no units and with the correct number of sig figs. How many grams does 5.60×1022 molecules of SiO2 weigh? Enter the number only, with no units and with the correct number of sig figs.

Answers

The number of grams present in 8.13 × 1023 molecules of CH4 is 13.6 g and the number of grams that 5.60 × 1022 molecules of SiO2 weighs is 93.3 g.How many grams are in 8.13 × 1023 molecules of CH4?The molar mass of CH4 is 16.04 g/mol and 1 mole of a compound contains 6.022 × 1023 molecules.

Using Avogadro's number:1 mole of CH4 = 6.022 × 1023 molecules of CH48.13 × 1023 molecules of CH4

= (8.13 × 10/6.022) moles of CH48.13 × 1023 molecules of CH4

= 13.54 moles of CH4Using the molar mass formula:Mass (in grams)

= Number of moles × Molar massMass (in grams)

= 13.54 moles × 16.04 g/molMass (in grams)

= 217.2 g Correct to two significant figures:13.6 g How many grams does 5.60 × 1022 molecules of SiO2 weigh?The molar mass of SiO2 is 60.08 g/mol and 1 mole of a compound contains 6.022 × 1023 molecules.

Using Avogadro's number:1 mole of SiO2 = 6.022 × 1023 molecules of SiO25.60 × 1022 molecules of SiO2

= (5.60 × 10/6.022) moles of SiO25.60 × 1022 molecules of SiO2

= 0.9328 moles of SiO2Using the molar mass formula:Mass (in grams)

= Number of moles × Molar massMass (in grams)

= 0.9328 moles × 60.08 g/molMass (in grams)

= 56.02 gCorrect to two significant figures:93.3 g

To know more about molecules visit:-

https://brainly.com/question/30465503

SPJ11

Which of the following acids will not dissociate completely in water? Pick only one. HCl HClO4​ HClO HNO3

Answers

HClO will not dissociate completely in water among the given option.

When acids dissolve in water, they can dissociate into ions. Strong acids dissociate completely, while weak acids only partially dissociate. To determine which acid will not dissociate completely, we need to identify the weak acid among the options.

HClO is a weak acid known as hypochlorous acid. It does not dissociate completely in water. Instead, it partially dissociates into H⁺ and ClO⁻ ions.

On the other hand, HCl, HClO₄, and HNO₃ are strong acids and dissociate completely in water, producing H⁺ ions. These strong acids are considered to be fully ionized in aqueous solutions.

learn more about acids here:

https://brainly.com/question/29796621

#SPJ11

When scientists seek information about air pollution in large citites, one of the reactions they study is shown below: 2NO(g)+O 2 ( g)⇌2NO 2 ( g) If the equilibrium partial pressures at a particular temperature were as follows, what would be the numerical value of K p ? NO=0.255 atm O =0.164 atm NO 2 =2.25 atm Round all answers to three (3) significant figures.What is the value of K p

for the reverse reaction? What is the value of K p for the reaction shown below? NO(g)+1/2O 2 ( g)⇋NO 2 ( g)

Answers

For the reaction [tex]NO(g) + 1/2O_2(g) -- > NO_2(g)[/tex], the value of Kp would be the same as the original Kp value obtained above, which is approximately 182.941.

To determine the value of Kp for the reaction, use formula:

[tex]Kp = (PNO_2)^2 / (PNO)^2 * (PO_2)[/tex]

Here, given that:

Partial pressure of NO (PNO) = 0.255 atm

Partial pressure of O₂ (PO₂) = 0.164 atm

Partial pressure of NO₂ (PNO₂) = 2.25 atm

Kp = (2.25)² / (0.255)² * (0.164)

Kp ≈ 182.941

Kp (reverse) = 1 / Kp ≈ 0.005464

Thus, the value of Kp would be the same as the original Kp value obtained above, which is approximately 182.941.

For more details regarding partial pressure, visit:

https://brainly.com/question/30114830

#SPJ4

Homework (Polymers in Pharm)----2022. 5. 24 1. The basic unit (building block) of hyaluronic acid. 2. What is the electric property of hyaluronic acid, positive or negative? 3. Properties of hyaluronic acid. 4. Clinical applications of hyaluronic acid. 5. Advantages of hyaluronic acid for drug delivery. 6. What are the applications of gelatin in pharmaceutics? 7. What are the advantages and usages of human serum albumin?

Answers

Hyaluronic acid: Negatively charged polysaccharide for injections and drug delivery. Gelatin: Used in capsules, coatings, and wound dressings. Human serum albumin: Expander, stabilizer, and drug carrier.

1. The basic unit (building block) of hyaluronic acid:

The basic unit of hyaluronic acid is a disaccharide composed of D-glucuronic acid and N-acetyl-D-glucosamine. These repeating disaccharide units are linked together to form the hyaluronic acid polymer chain.

2. Electric property of hyaluronic acid:

Hyaluronic acid is a polyanionic molecule, meaning it carries a negative charge. The carboxylate group present in the glucuronic acid units contributes to the overall negative charge of hyaluronic acid.

3. Properties of hyaluronic acid:

Hyaluronic acid is a naturally occurring polysaccharide found in the extracellular matrix of various tissues, including the skin, joints, and eyes.It has high water-binding capacity and can absorb and retain a significant amount of water, contributing to tissue hydration and lubrication.Hyaluronic acid is biocompatible and biodegradable, making it suitable for medical and pharmaceutical applications.It has viscoelastic properties, providing cushioning and shock-absorbing capabilities.Hyaluronic acid plays a role in cell signaling and tissue repair processes.

4. Clinical applications of hyaluronic acid:

Intra-articular injections: Hyaluronic acid is used in the treatment of osteoarthritis, where it can be injected directly into joints to provide lubrication and relieve pain.Dermal fillers: Hyaluronic acid-based fillers are used for cosmetic purposes to restore volume, smooth wrinkles, and enhance facial features.Ophthalmology: Hyaluronic acid eye drops and ointments are used to alleviate dry eye symptoms and promote corneal healing.Wound healing: Hyaluronic acid dressings and gels are used to facilitate wound healing by providing a moist environment and promoting tissue regeneration.

5. Advantages of hyaluronic acid for drug delivery:

Hyaluronic acid can be modified or cross-linked to form hydrogels, which can encapsulate and deliver drugs in a controlled manner.Its high water-binding capacity allows for the retention of drugs and sustained release over an extended period.Hyaluronic acid can target specific tissues or cells since it interacts with CD44 receptors, which are overexpressed in certain diseases and cancer cells.It is biocompatible, biodegradable, and non-toxic, making it suitable for drug delivery applications.

6. Applications of gelatin in pharmaceutics:

Capsule shells: Gelatin is widely used in the pharmaceutical industry to make capsules that contain powdered or liquid medications. Gelatin capsules can be easily swallowed and dissolve quickly in the gastrointestinal tract.Coatings and film-forming agents: Gelatin can be used as a coating material to protect tablets, control drug release, and improve the appearance and stability of pharmaceutical formulations.Injectable formulations: Gelatin can be modified into a thermosensitive hydrogel that can solubilize drugs and form a gel at body temperature, enabling sustained drug release and minimally invasive administration.Wound dressings: Gelatin-based dressings are used for the management of wounds, burns, and chronic ulcers due to their biocompatibility, moisture-retaining properties, and facilitation of tissue regeneration.

7. Advantages and usages of human serum albumin:

- Advantages:

Human serum albumin (HSA) is derived from human blood plasma and is highly biocompatible. HSA has a long half-life in the bloodstream, allowing for prolonged circulation and drug delivery. It has a high binding capacity for various drugs and can serve as a carrier for therapeutic agents.  HSA has antioxidant properties and can scavenge free radicals.

- Usages:

HSA is used as a plasma volume expander to treat hypovolemia and maintain blood volume during surgery or shock. It is utilized as a stabilizer or excipient in various pharmaceutical formulations, such as vaccines and protein-based drugs. HSA can be modified and conjugated with drugs for targeted delivery, improving drug solubility and bioavailability. It is employed in cell culture media to provide essential nutrients and promote cell growth. HSA is also used as a diagnostic tool in clinical laboratory tests and as a component of blood products for therapeutic purposes.

To know more about the Hyaluronic acid refer here,

https://brainly.com/question/32338220#

#SPJ11

Classify the compound HCl(aq).

Answers

HCl(aq) is classified as an acid. It is the chemical formula for hydrochloric acid, which is a strong acid when dissolved in water.

The "(aq)" indicates that the compound is dissolved in water, forming an aqueous solution.

Hydrochloric acid is commonly used in various industrial processes and laboratory applications due to its strong acidic properties.

Learn more about acid here : brainly.com/question/29796621
#SPJ11

In what direction, if any, would the equilibrium be shifted if the following changes were done on the reactions? PCl 3

( g)+Cl 2

( g)⇔PCl 5

( g) PCl 5

is removed from reaction

Answers

Removing PCl5(g) from the reaction shifts the equilibrium position to the left, favoring the formation of PCl3(g) and Cl2(g).

When a reactant or product is removed from a chemical reaction at equilibrium, the system responds by shifting the equilibrium position to compensate for the change. In this case, removing PCl5(g) from the reaction:

PCl3(g) + Cl2(g) ⇌ PCl5(g)

will cause the equilibrium to shift to the left, favoring the formation of PCl3(g) and Cl2(g).

To understand why this occurs, we can again apply Le Chatelier's principle, which states that a system at equilibrium will adjust to minimize the effect of any change imposed upon it.

In the given reaction, the removal of PCl5(g) decreases the concentration of one of the products. According to Le Chatelier's principle, the equilibrium will shift in the direction that replenishes the concentration of the removed substance. In this case, the equilibrium will shift to the left, favoring the formation of PCl3(g) and Cl2(g), as it replenishes the decreased concentration of PCl5(g).

The shift to the left occurs because the reaction proceeds in the reverse direction to produce more PCl3(g) and Cl2(g) until a new equilibrium is established. The decreased concentration of PCl5(g) leads to a decrease in the yield of this product.

In summary, the removal of PCl5(g) from the reaction shifts the equilibrium position to the left, favoring the formation of PCl3(g) and Cl2(g). This shift follows Le Chatelier's principle, which predicts that the equilibrium will adjust to compensate for the removal of a substance by favoring its formation.



To learn more about equilibrium click here: brainly.com/question/29359391

#SPJ11

What is the molar solubility (in mol L-1) of a salt with general molecular formula MX (where M is a cation and X is an anion) in a solution already containing 0.622 mol L-1 X- ? The Ksp of MX = 8.68 x 10-5 Remember: if you want to express an answer in scientific notation, use the letter "E". For example "4.32 x 104" should be entered as "4.32E4"

Answers

The molar solubility of the salt MX is 1.396E-4 mol/L.

The molar solubility of the salt with the general molecular formula MX, we need to consider the equilibrium expression for the dissolution of the salt:

[tex]\( \text{MX} \rightleftharpoons \text{M}^{n+} + \text{X}^{-} \)[/tex]

The solubility product constant (Ksp) expression for this equilibrium is:

[tex]\( Ksp = [\text{M}^{n+}] \cdot [\text{X}^{-}] \)[/tex]

Given that the concentration of X- in the solution is 0.622 mol/L, we can substitute the value into the Ksp expression:

[tex]\( 8.68 \times 10^{-5} = [\text{M}^{n+}] \cdot (0.622) \)[/tex]

To find the molar solubility[tex][\text{M}^{n+}],[/tex] we can rearrange the equation:

[tex]\( [\text{M}^{n+}] = \frac{8.68 \times 10^{-5}}{0.622} \)[/tex]

[tex]\( [\text{M}^{n+}] = 1.396 \times 10^{-4} \) mol/L[/tex]

Therefore, the molar solubility of the salt MX is 1.396E-4 mol/L.

To know more about molar solubility refer here

https://brainly.com/question/45748229#

#SPJ11

4.) A 0.100 mol sample of isobutane (a gas used for cooking) was placed in a bomb calorimeter with excess oxygen and ignited. The reaction is given as 2C 4

H 10

(l)+13O 2

( g)→8CO 2

( g)+10H 2

O(l) The initial temperature of the calorimeter was 25.000 ∘
C and its total heat capacity was 97.1 ∘
C
kJ

. The reaction raised the temperature of the calorimeter to 27.965 ∘
C. (a) How many calories of heat were liberated by the combustion of isobutane? (b) What is ΔE for the reaction expressed in mol
kJ

C 4

H 10

? (a) cal (b) ​
mol
kJ


5.) When 200. mL of 0.431MCa(OH) 2

at 20.5 ∘
C is mixed with 200.mL of 0.862MHCl, also at 20.5 ∘
C, in a styrofoam "coffee-cup calorimeter", the temperature of the mixture rose to 26.3 ∘
C. Calculate ΔH in kJ for the neutralization of 1 mol of H +
by 1 mol of OH −
(i.e. H +
(aq)+OH −
(aq)→H 2

O(1)). Assume that the specific heat of the solutions is 4.184 g ∘
C
J

.

Answers

ΔH for the neutralization of 1 mol of H+ by 1 mol of OH- is approximately 0.005 kJ.

(a) To calculate the calories of heat liberated by the combustion of isobutane, we can use the formula:

[tex]q = m * C * ΔT[/tex]

where:
q = heat energy (calories)
m = mass of substance (in this case, isobutane) = 0.100 mol
C = heat capacity of the calorimeter = 97.1 ∘C kJ
ΔT = change in temperature = 27.965 ∘C - 25.000 ∘C

Plugging in the values, we get:

[tex]q = 0.100 mol * 97.1 ∘C kJ * (27.965 ∘C - 25.000 ∘C)[/tex]
[tex]q = 0.100 mol * 97.1 ∘C kJ * 2.965 ∘C[/tex]
q = 29.06965 cal

Therefore, approximately 29.07 calories of heat were liberated by the combustion of isobutane.

(b) To calculate ΔE for the reaction expressed in mol kJ C4H10, we can use the formula:

[tex]ΔE = q / n[/tex]

where:
ΔE = change in energy (mol kJ C4H10)
q = heat energy (calories) = 29.07 cal
n = number of moles of isobutane = 0.100 mol

Converting calories to joules, we get:

[tex]ΔE = (29.07 cal) * (4.184 J/cal) / (1000 J/kJ) / (0.100 mol)[/tex]
ΔE = 0.1219712 mol kJ C4H10

Therefore, ΔE for the reaction expressed in mol kJ C4H10 is approximately 0.122 mol kJ C4H10.

5.) To calculate ΔH in kJ for the neutralization of 1 mol of H+ by 1 mol of OH-, we can use the formula:

[tex]ΔH = q / (n(H+) + n(OH-))[/tex]
where:
ΔH = change in enthalpy (kJ)
q = heat energy (J)
n(H+) = number of moles of H+ = 1 mol
n(OH-) = number of moles of OH- = 1 mol

First, we need to calculate the heat energy (q) using the formula:

[tex]q = m * C * ΔT[/tex]

where:
m = mass of the solution

= volume * concentration

= (200 mL + 200 mL) * (0.431 M + 0.862 M) = 0.3608 moles
C = specific heat of the solution = 4.184 g ∘C J
ΔT = change in temperature = 26.3 ∘C - 20.5 ∘C

Plugging in the values, we get:

q = 0.3608 moles * 4.184 g ∘C J * (26.3 ∘C - 20.5 ∘C)
q = 0.3608 moles * 4.184 g ∘C J * 5.8 ∘C
q = 9.6490784 J

Converting joules to kilojoules, we get:

q = 9.6490784 J / (1000 J/kJ)
q = 0.0096490784 kJ

Finally, plugging the values into the formula for ΔH, we get:

ΔH = 0.0096490784 kJ / (1 mol + 1 mol)
ΔH = 0.0048245392 kJ

Therefore, ΔH for the neutralization of 1 mol of H+ by 1 mol of OH- is approximately 0.005 kJ.

To know more about energy visit-

https://brainly.com/question/1932868

#SPJ11

For the following reaction, 25.7 grams of sulfur dioxide are allowed to react with 6.27 grams of water . sulfur dioxide (g)+ water (I)⟶ sulfurous acid (H 2

SO 3

)(g) What is the maximum amount of sulfurous acid (H 2

SO 3

) that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete? grams For the following reaction, 17.5 grams of iron are allowed to react with 9.51 grams of oxygen gas . iron (s)+oxygen(g)⟶ iron(II) oxide ( s ) What is the maximum amount of iron(II) oxide that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete? grams For the following reaction, 13.9 grams of chlorine gas are allowed to react with 7.10 grams of water . chlorine ( g ) + water (I) ⟶ hydrochloric acid ( aq ) + chloric acid (HClO 3

)(aq ) What is the maximum amount of hydrochloric acid that can be formed? grams What is the FORMULA for the limiting reagent? What amount of the excess reagent remains after the reaction is complete? grams

Answers

In the given reactions, the maximum product amounts are 29.3 g H2SO3, 18.5 g FeO, and 11.5 g HCl. The limiting reagents are sulfur dioxide, oxygen gas, and water, respectively, with remaining excess reagents of 1.43 g water, 7.89 g iron, and 0.54 g chlorine gas.

For the reaction between sulfur dioxide and water, the maximum amount of sulfurous acid (H2SO3) that can be formed is 29.3 grams. The limiting reagent is sulfur dioxide (SO2), and 1.43 grams of water remains as the excess reagent after the reaction is complete.

For the reaction between iron and oxygen gas, the maximum amount of iron(II) oxide (FeO) that can be formed is 18.5 grams. The limiting reagent is oxygen gas (O2), and 7.89 grams of iron remains as the excess reagent after the reaction is complete.

For the reaction between chlorine gas and water, the maximum amount of hydrochloric acid (HCl) that can be formed is 11.5 grams. The limiting reagent is water (H2O), and 0.54 grams of chlorine gas remains as the excess reagent after the reaction is complete.

To know more about sulfur dioxide here: brainly.com/question/9720549

#SPJ11

Calculate ΔHnn0​ for the chlorination of methane to form chloroform. C−H(413 kJ/mol),Cl−Cl(243 kJ/mol),C−Cl(339 kJ/mol),H−Cl(427 kJ/mol).  CH4​( g)+3Cl2​( g)→CHCl3​( g)+3HCl(g) a) 2381 kJ b) 330 kJ c) −330 kJ d) −2381 kJ

Answers

The ΔH required to convert methane to chloroform is 812 kJ/mol.

For calculating the enthalpy change (ΔH) for the given reaction, we can use the concept of bond enthalpies.

The enthalpy change is determined by the difference between the energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

Bond enthalpies:

C-H: 413 kJ/mol

Cl-Cl: 243 kJ/mol

C-Cl: 339 kJ/mol

H-Cl: 427 kJ/mol

In the reaction:

[tex]CH_{4} (g) + 3Cl_{2} (g) - > CHCl_{3} (g) + 3HCl(g)[/tex]

We need to calculate the energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

Energy required to break bonds in reactants:

4 C-H bonds = 4 * 413 kJ/mol = 1652 kJ/mol

6 Cl-Cl bonds = 6 * 243 kJ/mol = 1458 kJ/mol

Energy released when new bonds are formed in the products:

3 C-Cl bonds = 3 * 339 kJ/mol = 1017 kJ/mol

3 H-Cl bonds = 3 * 427 kJ/mol = 1281 kJ/mol

Now, we can calculate the net energy change:

ΔH = (energy required to break bonds in reactants) - (energy released when new bonds are formed in products)

   = (1652 kJ/mol + 1458 kJ/mol) - (1017 kJ/mol + 1281 kJ/mol)

   = 3110 kJ/mol - 2298 kJ/mol

   = 812 kJ/mol

Therefore, the ΔH for the chlorination of methane to form chloroform is 812 kJ/mol.

To know more about bond enthalpies refer here:

https://brainly.com/question/29633366?#

#SPJ11

There are____________________ atoms of potassium in 0.307 mol of potassium. 1.84 x 1022,5.10 x 10-25, 1.85 x 1023 ,1.84 x 10-25

Answers

There are 1.85 x 10²³ atoms of potassium in 0.307 mol of potassium.

To determine the number of atoms of potassium in 0.307 mol of potassium, we need to use Avogadro's number, which relates the number of particles (atoms, molecules, etc.) to the amount of substance in moles.

Avogadro's number is approximately 6.022 x 10²³ particles/mol. This means that 1 mol of any substance contains 6.022 x 10²³ particles.

In the given problem, we have 0.307 mol of potassium. To find the number of atoms, we multiply the amount of substance (in mol) by Avogadro's number:

Number of atoms = 0.307 mol * (6.022 x 10²³ atoms/mol)

Calculating this, we get:

Number of atoms = 1.85 x 10²³ atoms

Therefore, there are 1.85 x 10²³ atoms of potassium in 0.307 mol of potassium.


To know more about Avogadro's number refer here:

https://brainly.com/question/28812626#

#SPJ11

From the equilibrium concentrations given, calculate Ka for each of the weak acids and K, for each of the weak bases. a) C6H5NH3+: [C6H5NH3+] = 0.233 M; [C6H5NH₂] = 2.3 × 10-³ M; [H3O+] = 2.3 × 10-³ M b) ClO-: [OH-] = 4.0 × 10-4 M; [HClO] = 2.38 × 10-5 M; [ClO-] = 0.273 M

Answers

A) The value of Ka for the weak acid C₆H₅NH₃⁺ is approximately 5.03 × 10⁻¹¹.

b) The value of Kb for the weak base ClO⁻ is approximately 1.86 × 10⁻⁵.

A) For the weak acid C₆H₅NH₃⁺, the equilibrium expression for Ka is given by: Ka = [C₆H₅NH₂][H₃O⁺] / [C₆H₅NH₃⁺].

[C₆H₅NH₃⁺] = 0.233 M

[C₆H₅NH₂] = 2.3 × 10⁻³ M

[H₃O⁺] = 2.3 × 10⁻³ M

Plugging these values into the Ka expression:

Ka = (2.3 × 10⁻³ M)(2.3 × 10⁻³ M) / (0.233 M)

Ka ≈ 5.03 × 10⁻¹¹

b) For the weak base ClO⁻, the equilibrium expression for Kb is given by: Kb = [OH⁻][HClO] / [ClO⁻].

[OH⁻] = 4.0 × 10⁻⁴ M

[HClO] = 2.38 × 10⁻⁵ M

[ClO⁻] = 0.273 M

Plugging these values into the Kb expression:

Kb = (4.0 × 10⁻⁴ M)(2.38 × 10⁻⁵ M) / (0.273 M)

Kb ≈ 1.86 × 10⁻⁵

learn more about ka here:

https://brainly.com/question/31308783

#SPJ11

Consider these compounds: A. CaSO4 B. Zn(CN)2 C. CoCO3 D. Ag2SO4
Without doing any calculations it is possible to determine that manganese(II) carbonate is more soluble than___, and manganese(II) carbonate is less soluble than___. It is not possible to determine whether manganese(II) carbonate is more or less soluble than ___ simply comparing Ksp values.

Answers

Without doing any calculations, it is possible to determine that manganese(II) carbonate is more soluble than D. Ag₂SO₄, and manganese(II) carbonate is less soluble than A. CaSO₄. It is not possible to determine whether manganese(II) carbonate is more or less soluble than B. Zn(CN)₂ simply by comparing the Ksp values.

The solubility of a compound can be inferred based on the solubility rules and the nature of the ions involved. In this case, we are comparing the solubility of manganese(II) carbonate (MnCO₃) with the given compounds A. CaSO₄, B. Zn(CN)₂, C. CoCO₃, and D. Ag₂SO₄.

Based on the solubility rules, compounds containing Group 1 metals (such as calcium in CaSO₄) and nitrate ions (not present in the given compounds) are typically soluble. Thus, A. CaSO₄ is more soluble than manganese(II) carbonate.

On the other hand, compounds containing silver ions (Ag⁺) are generally insoluble, indicating that D. Ag₂SO₄ is less soluble than manganese(II) carbonate.

Regarding B. Zn(CN)₂ and C. CoCO₃, without additional information or specific knowledge of their solubility behavior, it is not possible to determine whether manganese(II) carbonate is more or less soluble than these compounds solely by comparing their Ksp values.

learn more about Solubility here:

https://brainly.com/question/15345939

#SPJ11

Other Questions
who speaks the Prologue? What is the Prologue's purpose in Romeo and Juliet A bank states that it pays 5% interest on savings. This stated interest rate is the (A)annual effective interest (B)nominal interest (C)average interest per compounding period (D)interest when the compound period is one year You are to create your own version of a string class named myString. (Use separate source myString.cpp and header files, myString.h) myString will store a string of characters (use dynamic memory- ptr to char) Include a reference "status variable" to indicate error state. You will also need to supply the following methods as part of your class: myString(string) - you may have a constructor that takes a string parameter size() - returns how many characters are in the string (empty string is size zero) addStart(myString) - adds the string in the input parameter to the front of current addEnd(myString) adds the string in the input parameter to the end of the current partString(startPos, length) returns as myString that portion from startPos for length given. Handle startPos size; startPos = size returns null string string string replPartString(myString, startPos) - replaces characters starting at startPos with parameter, which may be , or in size to what is replaced replWholeString (myString) replaces current string data value with parameter string compare String(myString) - compare current value of string with parameter string. Returns 0 if strings match, otherwise return character position (NOT index) where mismatch occurs. If parameter is first alphabetically then return is positive, otherwise negative. initString() - resets/initializes string to null string setString(string) assign to myString the parameter string getString() - returns string of data from myString printString Screen() - prints myString data value to the monitor (value only, nothing else) numericString()) returns Boolean telling if data value is an integer or real (signs, decimal point. etc.), or not alphabetic String() - returns Boolean telling if data value is all alphabetic characters You may use the C++ string class only for user input and the setString & getString methods. Only size from the string library may be used, and only within setString method. Write a main that will test all of functionalities of the myString class, displaying the actions both on the screen and to an output file. Main must use a myString method to write the results to the file. Create an output file log of actions, which must show action, original value of myString, parameters/results, success/error message. You determine appearance of log file - format into columns for readability -- and what the error messages will be. Which of the following means that a company took all reasonable steps to avoid a particular event? A. due process B. just cause C. due diligence D. reasonable accommodation E. preventive solutions Which of the following is a major cause of workplace stress related to career development? A. autonomy B. level of responsibility C. isolation D. job security E. workload The relation of a line graph is visualized by drawing lines between all of the points on a grid. Y3y+9y27y=Sec3t,Y(0)=2,Y(0)=3,Y(0)=9. A Fundamental Set Of Solutions Of The Homogeneous Equation Is Giv please see photo thank you a nurse is caring for a 33-year-old primigravida client who is obese and near the end of their second trimester. the client has a history of prepregnancy obesity, hypertension, and smoking. complete the following sentence(s) by choosing from the lists of options. the client is at highest risk for developing . the nurse provides discharge teaching to reduce the risks of developing this condition. teaching should include . cash increase due to the proceeds from the bond issuance would be found in which section of the statement of cash flows? the financing activities section the accrual activities section the operating activities section the investing activities section Which of the following best describes the hierarchical system? * 1 pointa) It is a policy for creating arbitrary categories of goods to be differently applied by each WCO country.b)It is the system whereby the development of classification is accomplished on a randomized basis.c) It is the structure of the tariff whereby goods are ranked from lowest to highest level of manufacture, from least to most.d) It is the structural basis for the application of the definitions of prohibited importation. How will you continue to develop your professional skills and knowledge of your specialist subjects and keep up to date with changes in these areas? Pesticides sometimes create contradictory results. Insecticides sprayed in rice fields created 500 to 1000 times more than in fields not sprayed A simply supported beam 10 m long carries a uniformly distributed load of 24 kN/m over its entire span. E = 200 GPa, and I = 240 x 106 mm4. Compute the deflection at a point 4 m from the left support. Select one: a. 44 mm b. 75 mm c. 62 mm d. 58 mm Is 5/42 greater than less than or equal to 10/84 Find the angle of elevation of the sun from the ground when atree that is 13 ft tall casts a shadow 16 ft long. Round to thenearest degree.Find the angle of elevation of the sun from the ground when a tree that is \( 13 \mathrm{ft} \) tall casts a shadow \( 16 \mathrm{ft} \) long. Round to the nearest degree. Question 4 If 3 = 87, y = 67, c = 10.72, find all unknown side lengths and angle measures. Round to the nearest hundredth for side lengths and angles, as needed. b C a help pls!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1. Computer 1 on network B, with IP address of 192.168.1.233,computer 2, which ip address of 10.1.1.205. On which network is computer 2 choose the wordthat means the opposite of theword specific.always specificA vagueB completeC difficultD spontaneous 2H 2O2H 2+O 2How many moles of O 2will be produced from 6.2 moles of water? Question 2 2H 2O2H 2+O 2How many moles of H 2O will be required to make 19.2 moles of O 2? Question 3 2H 2O2H 2+O 2How many grams of H 2O will be required to make 19.2 moles of O 2? make sure to include the correct number of signficant figures!