Calculate the weight of an object of mass 15Kg kept on the earth. If the same object is taken to mars, what change will happen to its mass and weight?(freefall acceleration on mars=3.7 m/s2)

The correct option is D. 3690s They can hare afford to nap if he does not want to lose the race.

D= 1000m

[tex]V_T[/tex]= 0.27 m/s

[tex]T_t=\frac{1000}{0.27} = 3703.7sec[/tex]

[tex]T_h = \frac{100}{15}[/tex][tex]= 6.7sec[/tex]

[tex]T_t = 7+ t_n +t_h[/tex]

[tex]3703.7 = 7+t_n +6.7\\t_n = 3703.7- 13.7\\t_n = 3690sec[/tex]

The pace is measured as the ratio of distance to the time wherein the distance is turned into a blanket. the pace is a scalar quantity because it has the most effective course and no importance. For the size of the pace in vehicles, speedometers are used. pace also can be calculated with the assistance of a graph. the space-time graph allows know-how of the rate of an object.

In regular use and in kinematics, the rate of an object is the value of the change of its position over the years or the importance of the alternate of its function per unit of time; its miles as a result a scalar amount. the spot pace is the limit of the common pace because the period of the time c program language period approaches 0. pace isn't always similar to velocity.

To learn more about Speed visit here:

brainly.com/question/28224010

#SPJ4

The volume of the metal object is [tex]148.5 L[/tex].

It is given that,

The mass of the metal object is [tex]m=34.9 mg[/tex].

The density of the metal object is [tex]\rho=23.5 cg/m^3[/tex].

It is known that, [tex]1cg=10 mg[/tex].

So, the density of the metal object, [tex]\rho=(23.5\times10)mg/m^3=235mg/m^3[/tex].

Let us assume that, the volume of the metal object is [tex]V[/tex].

Now, density, [tex]\rho=\frac{m}{V}[/tex]

[tex]\Rightarrow V=\frac{m}{\rho}[/tex]

[tex]\Rightarrow V=\frac{34.9 mg}{235 mg/m^3}[/tex]

[tex]\Rightarrow V=0.1485m^3[/tex]

It is known that, [tex]1m^3=1000L[/tex].

So, volume [tex]V=(0.1485\times1000)L[/tex]

[tex]\Rightarrow V=148.5 L[/tex]

Hence, the volume of the metal object is [tex]148.5 L[/tex].

Learn more about density here: https://brainly.com/question/25173499

#SPJ4

Strong nuclear force acts between neutrons and protons and does not influence chemical reactions, so nuclei in your body are not spontaneously exploding, hence option D is correct.

The nuclear force is a kind of force that acts between the protons and neutrons of atoms. Neutrons and protons, both nucleons, are influenced by the nuclear force almost equally.

It is the force that binds neutrons and protons together and does not allow them to fly apart. This force can act between neutrons and protons, protons and protons, and neutrons and neutrons.

Therefore, strong nuclear force is responsible for this phenomenon.

Learn more about nuclear force, here:

https://brainly.com/question/4346079

#SPJ9

They both had the same potential energies. This is because everyone can be found in the same location.

Describe potential energy.

An object or set of things may have potential energy stored in them depending on their size, form, location, or even the material they are constructed of. Find out what potential energy is and the various kinds that an object might have.

There was a difference in the average amount that the box slid after catching the marble when comparing the marbles. The more kinetic energy I have, the greater the impact it has and, as a result, the further the box will slide away. At the end of the ramp, the kinetic energy between them is NOT equal. Because of its greater mass, kinetic energy has larger potential. Distance reveals the outcome.

My data indicate that both of my hypotheses for each experiment are true. My theory for the initial trial was that moving the box by 40 cm would be the most effective. Considering that the average distance was the greatest of all, this was in fact true. The second experiment was conducted similarly. My hypothesis for the second experiment was that the more the marole's mass, the greater the box's distance.

To learn more about potential energy use link below:

https://brainly.com/question/14427111

#SPJ1

To determine the physical quantities and units represented by a, b, and d, we need additional information about the specific context in which the equation is being used.

The equation you provided, v = √ab + bt + d + t, is a mathematical expression that relates the velocity, v, of a particle to time, t.

However, without additional information, it is not possible to determine the physical quantities represented by the variables a, b, and d, or their corresponding units.

Typically, in physics, the variables in a equation represent specific physical quantities, and the units associated with these variables help us understand the nature of the physical system being described.

Learn more about  physical quantities here: https://brainly.com/question/5873459

#SPJ1

The Arrhenius equation is a mathematical formula that describes the relationship between the rate of a chemical reaction and the temperature at which it occurs.

Part A:

We can use the modified Arrhenius equation to solve for the temperature at which the reaction goes twice as fast as at 20°C. Let's call this temperature T2:

k2 = k1 * e^(-Ea/R * (1/T2 - 1/T1))

We know k1 = 0.0140 s^-1, T1 = 20°C + 273.15 = 293.15 K, and Ea = 38.2 kJ/mol. We want to solve for T2.

First, let's rearrange the equation to isolate e^(-Ea/R * (1/T2 - 1/T1)):

e^(-Ea/R * (1/T2 - 1/T1)) = k2/k1

Now we can take the natural logarithm of both sides:

-ln(k2/k1) = Ea/R * (1/T2 - 1/T1)

Let's plug in the values we know:

-ln(2/1) = (38.2 kJ/mol) / (8.314 J/mol.K) * (1/T2 - 1/293.15 K)

Simplifying this equation gives:

1/T2 = 1/293.15 K - ln(2) * (8.314 J/mol.K) / (38.2 kJ/mol)

Solving for T2:

T2 = 1 / (1/293.15 K - ln(2) * (8.314 J/mol.K) / (38.2 kJ/mol)) - 273.15 K

T2 ≈ 356.9 K ≈ 83.8°C

Therefore, the temperature at which the reaction goes twice as fast as at 20°C is approximately 83.8°C.

Part B:

We can again use the modified Arrhenius equation to solve for the rate constant at 180°C. Let's call this rate constant k3:

k3 = k1 * e^(-Ea/R * (1/T3 - 1/T1))

We know k1 = 0.0140 s^-1, T1 = 20°C + 273.15 = 293.15 K, and Ea = 38.2 kJ/mol. We want to solve for k3 when T3 = 180°C + 273.15 = 453.15 K.

Plugging in the values we know:

k3 = 0.0140 s^-1 * e^(-38.2 kJ/mol / (8.314 J/mol.K) * (1/453.15 K - 1/293.15 K))

k3 ≈ 11.22 s^-1

Therefore, at a temperature of 180°C, the rate constant for the reaction would be approximately 11.22 s^-1.

To know more about Arrhenius Equation visit:

https://brainly.com/question/4370546

#SPJ4

The net force on q2 in the x-direction is positive, indicating that it is directed to the right.

The x-component of the net force on q2 can be found using Coulomb's law, which states that the force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. The formula for the force between two point charges q1 and q2 is given by:

F = k * (q1 * q2) / d^2

where k is the Coulomb constant (8.99 x 10^9 N * m^2 / C^2), d is the distance between the charges, and q1 and q2 are the magnitudes of the charges.

In this case, we have three charges, so we need to calculate the net force on q2 by considering the force between q2 and each of the other charges. The x-component of the net force is the sum of the x-components of the individual forces.

Let's call the distance between q2 and q1 d12 and the distance between q2 and q3 d23. If q1 is to the left of q2, then the x-component of the force on q2 due to q1 is given by:

F12x = k * (q1 * q2) / d12^2 * (-d12/d12) = -k * (q1 * q2) / d12^2

Similarly, if q3 is to the right of q2, then the x-component of the force on q2 due to q3 is given by:

F23x = k * (q2 * q3) / d23^2 * (d23/d23) = k * (q2 * q3) / d23^2

The net force on q2 in the x-direction is given by:

Fnetx = F12x + F23x = -k * (q1 * q2) / d12^2 + k * (q2 * q3) / d23^2

Plugging in the values for the charges and the Coulomb constant, we get:

Fnetx = -k * (-4.60•10^-6 C * 3.75•10^-5 C) / d12^2 + k * (3.75•10^-5 C * -5.30•10^-6 C) / d23^2 = +k * (4.60•10^-6 C * 3.75•10^-5 C) / d12^2 - k * (3.75•10^-5 C * 5.30•10^-6 C) / d23^2

Therefore, the net force on q2 in the x-direction is positive, indicating that it is directed to the right.

learn more about net force: https://brainly.com/question/14709298

#SPJ1

You could read the time at night  if a minimum of 14.0% of the original tritium is needed to read the dial in dark places is 34.889 yr.

Given t1/2=12.3 yr

That amount at any given time,

A(t), is a power function with 1/2 as the base and the original amount at

t=0, A(0):

[tex]A(t) = A(0)(\frac{1}{2} )^\frac{t}{t_\frac{1}{2} }[/tex]

We convert 14% to 0.14 = [tex]\frac{A(t)}{A(0)}[/tex]

Using the natural logarithm on both sides:

ln(0.14) = [tex]\frac{1}{2}^\frac{t}{12.3}[/tex]

Using the property of logarithms that allows us to move the exponent to the outside as a coefficient:

ln 0.14 = ln(1/2) (t/12.3)

t = ln(0.14)/ -ln 2 x 12.3

t = 34.889 yr

The number of years that the time could be read at night is 34.889 years.

Learn more about Time reading problems:

https://brainly.com/question/6346382

#SPJ4

Gravitational potential energy of an object is affected by mass, gravity, and height. Energy is directly proportional to all three variables.

An thing inherently possesses a certain quantity of energy. The amount of energy an item possesses when a force coming from a distance, like as gravity, is acting on it and an object is not supporting it is known as the Gravitational Potential Energy. This energy can be utilised later to move an item since it can be stored and utilised at a later time.

We can claim that the following things affect the gravitational potential energy: weight of the thing. Size of the thing.

The energy that a large object has in relation to another large object due to gravity is known as gravitational potential energy.

Learn more about Gravitational potential energy here:

https://brainly.com/question/19768887

#SPJ4

The angular frequency of the oscillations is 3.126 rad/s.

To find the angular frequency of the oscillations, we need to use the formula:

ω = √(k/m)

where ω is the angular frequency, k is the spring constant, and m is the mass attached to the spring.

First, let's find the spring constant k. According to Hooke's law, the force F applied to a spring is proportional to its displacement x from its equilibrium position, and the constant of proportionality is the spring constant k:

F = -kx

where the negative sign indicates that the force is in the opposite direction to the displacement. We can rearrange this equation to solve for k:

k = -F/x

where F is the weight of the mass attached to the spring, which is given by:

F = mg

where m is the mass of the object and g is the acceleration due to gravity. Therefore, we have:

k = -(mg)/x

Substituting the given values, we get:

[tex]k = -(0.5 kg)(9.81 m/s^2)/(0.2 m)[/tex]

= -24.525 N/m

Next, we need to find the new equilibrium position of the mass after it is pulled down by an additional 0.1 m. Since the spring is initially stretched by 0.2 m, the total displacement from the rest position is 0.2 m + 0.1 m = 0.3 m. Therefore, the new equilibrium position is 0.3 m below the original rest position.

Now, we can find the angular frequency of the oscillations using the formula:

ω = √(k/m)

where m is the mass of the object. Since the mass is the same as before, we have:

ω = √(k/m)

= √(-24.525 N/m / 0.5 kg)

= 3.126 rad/s

Therefore, the angular frequency of the oscillations is 3.126 rad/s.

Learn more about angular velocity, here:

https://brainly.com/question/29557272

#SPJ1

Everything is made out of energy, according to science. The foundation of all matter contains it.

For more information on energy and matter kindly visit to

https://brainly.com/question/23490755

#SPJ1

The moon is decreasing in light between a full moon and a last quarter moon called waning.

Describe about moon?
Moon is the satellite of Earth and the only natural satellite of Earth. It is the fifth-largest natural satellite in the Solar System. It orbits around Earth in an elliptical path and takes 27.3 days to complete one revolution. It is made up of different types of rocks and dust and has no atmosphere. Its surface is covered with impact craters, mountains, valleys, and lava-filled plains. It also has frozen water at the poles. The moonlight is reflected sunlight and the light of the moon changes its shape throughout the month due to its changing position with respect to the Earth and the Sun. It is the Earth's only natural satellite and the most visible object in the night sky.

Therefore, The moon is decreasing in light between a full moon and a last quarter moon called waning.

To learn more about moon

Here: https:brainly.com/question/27353113

#SPJ4

The electric field is given by the formula e for the sphere + e for the cylinder, which is equal to negative row r over 3 б+ ρr over 2 б +  ρr / s.

We prefer to find the strength of our electric field at r because distances are less than a. If an is less than a, we can think of our length cylinder as being coaxial with a galcene cylinder of radius r. Now, let's say that our cylinders resemble this. The charge contained within the cylinder is then equal to either row times v or row pi r, squared times l. Gauss law can then be used to calculate our electric field.

Since e da da is equal to q, enclosed divided by epsilon naught, e times integral of da is equal to q, enclosed divided by epsilon naught, so e times 2 π r l = rho π r, squared l divided by Epsilon naught, so e is equal to row r divided by 2 б. Since the average cylinder is positively charged, this Let's now think about a galcene sphere with radius r. This calcium sphere has a charge that is negative row times 4/3πr³.

Let's now determine the electric field at a place that is e times away from the centre. Negative row 4/3πr³/б (epsilon) = 4πr². As a result, some of these components of our electric field—which is negative, pi negative row, and r divided by 3 epsilon—are also present inside the hole. So, we do. The electric field is given by the formula e for the sphere + e for the cylinder, which is equal to negative row r over 3 epsilon plus row r over 2 epsilon plus row r divided by s.

Learn more about electric field here :

brainly.com/question/14884133

#SPJ4

If all other conditions (such as wind speed and water current) are equal and there are two identical boats with identical engines that push with the same force, the boat carrying the two little women is likely to win the race.

Assuming the two boats have identical mass and shape, the boat carrying the four large men will be slower than the boat carrying the two small women. This is because the boat carrying the men has more total weight, and thus has a greater force of gravity acting upon it. The greater force of gravity increases the frictional forces between the boat and the water, which in turn decreases the speed of the boat. According to Newton's second law of motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Since the two boats are being pushed with the same force, the boat with less mass (i.e., the boat carrying the two small women) will experience greater acceleration than the boat with more mass (i.e., the boat carrying the four large men). Therefore, the boat carrying the two small women is likely to win the race, assuming all other factors (such as wind speed and water current) are equal.

To know more about force please refer: https://brainly.com/question/13837590

#SPJ4

The freezing point of the solution will decreases by the addition of the salt. The freezing point of the solution is  - 0.76 °C and boiling point increases to 100.21  °C.

The addition of a nonvolatile salt into a solvent will decrease the freezing point of the solution. Similarly the salt addition will increases the boiling point of the solution. Both are colligative properties and depends on the molality as written below:

ΔTf = Kf m

ΔTb = Kb m

Where, kb for water is 0.52 °C kg/mol and Kf is 1.86 °C kg/mol.

Molar mass of FeCl₃ = 162.3 g/mol

no.of moles in 10.6 g = 10.6 /162. 3 = 0.065 moles.

mass of water = 159 g = 0.159 kg.

molality of the solution = 0.065 mol/0.159 kg = 0.4088.

now, ΔT  = 0.186 °C kg/mol × 0.4088 = 0.76

T = 0 - 0.76 = -0.76°C (freezing point of water = 0°C ).

Similarly ΔTb  = 0.52 °C kg/mol × 0.4088 = 0.212

Tb = 100 + 0.212 = 100.21 °C (boiling point of water =100°C ).

Therefore, the freezing point of the solution is- 0.76  °C and boiling point of the solution is 100.21 °C.

Find more on freezing point depression :

https://brainly.com/question/2292439

#SPJ1

The area of the figure is approximately 577.86 square centimeters.

To find the area of the figure made up of a square with sides of 15 centimeters and four attached semicircles, we can break it down into two parts: the area of the square and the area of the four semicircles.

The area of the square is found by multiplying the length of one side by itself. So in this case, the area of the square is:

Area of square = side length x side length = 15 cm x 15 cm = 225[tex]cm^2[/tex]

The four semicircles make up a circle with a diameter equal to the length of one side of the square. So the radius of the circle is half of the length of one side of the square, which is:

Radius of circle = 1/2 x side length = 1/2 x 15 cm = 7.5 cm

The area of one semicircle is half the area of the full circle, which is π times the radius squared divided by 2. So the area of four semicircles is:

Area of four semicircles = [tex]4 x (1/2 x π x radius^2) = 2πr^2[/tex]

Plugging in the value of the radius, we get:

Area of four semicircles = [tex]2π x (7.5 cm)^2 = 352.86 cm^2[/tex](rounded to two decimal places)

Therefore, the total area of the figure made up of a square with sides of 15 centimeters and four attached semicircles is:

Total area = area of square + area of four semicircles

Total area = [tex]225 cm^2 + 352.86 cm^2[/tex]

Total area = [tex]577.86 cm^2[/tex] (rounded to two decimal places)

for such more question on area

brainly.com/question/28012687

#SPJ4

1. The forces acting on the block while it is hanging freely are gravitational force and tension force.

2. The forces acting on the block while placed on the ramp with the spring scale are:

3. The magnitude of the normal force acting on the block when it is resting on a flat surface is equal to the force of gravity acting on the block, or m * g.

1. The forces acting on the block when it is hanging freely from the spring scale are:

The net force on the block is zero, as the block is in static equilibrium, meaning that the sum of all forces acting on the block is equal to zero.

The magnitude of the force of gravity acting on the block can be calculated using the formula:

F_gravity = m * g

where m is the mass of the block and g is the acceleration due to gravity (approximately 9.8 m/s^2).

The magnitude of the tension force acting on the block is equal to the reading on the spring scale, as the scale measures the tension in the string to which the block is attached.

2. The forces acting on the block when it is placed on the ramp and held in place by the spring scale are:

The net force acting on the block is equal to the force of gravity minus the normal force, as the ramp is a frictionless surface and there is no friction acting on the block. This net force will cause the block to accelerate down the ramp.

The magnitude of the normal force acting on the block can be calculated using the formula:

F_normal = m * g * cos(θ)

where θ is the angle of the ramp with respect to the horizontal.

3. The magnitude of the normal force acting on the block when it is resting on a flat surface is equal to the force of gravity acting on the block, or m * g.

As the angle of the ramp increases, the normal force acting on the block decreases. This is because the component of the force of gravity acting perpendicular to the ramp (the component responsible for the normal force) decreases as the angle of the ramp increases. The decrease in the normal force leads to an increase in the net force acting on the block, causing it to accelerate down the ramp.

Learn more on gravitational forces here https://brainly.com/question/29276623

#SPJ1

Option B is correct Light waves travelling through air are reflected in water.

Light, as we know, requires a medium for propagation. Every medium has its unique refractive index, which is often measured with relation to air. For the purpose of simplicity, the refractive index of air is assumed to be one.

When we view anything, the light from that item passes via the medium of air to our retina. During its propagation, light has a fixed wavelength and speed.

When an item is positioned between two mediums, light travels through both before reaching our eyes.

The two media in this case are air and water. Water has a greater refractive index than air, resulting in refraction. The speed of light reduces when the medium changes. The refraction is what causes Due to the difference in light speed, the stick in the water seems twisted or broken.

Learn more about light travels from here;

https://brainly.com/question/1831789

#SPJ4

The sign "kg" stands for kilogramme (kg), which is the unit of mass used in gravity calculations.

The kilogramme is the standard mass unit that is used almost globally and is the SI unit of mass. The kilogramme weighs 9.8 Newtons under normal conditions on the surface of the Earth, and the Newton is the corresponding SI unit of force and weight.

The unit of measurement for mass, or mass in kilogramme, is matter. A bird's bulk remains constant. No matter where you weigh something—on Earth, the Moon, or Mars—it always weighs 15 grammes. Weight is a measurement of the gravitational pull of an object and is determined by newtons.

To know more about gravity visit:-

https://brainly.com/question/14874038

#SPJ1

If air resistance is present, it would cause the graph in part a to curve down, making it less steep. This is because air resistance would oppose the motion of the object and cause it to slow down over time, resulting in a slower rate of change in the displacement over time.

Air resistance, also known as drag, is a force that opposes the motion of an object as it moves through the atmosphere. It arises from the collision of air molecules with the object's surface, which generates friction and a pressure differential. Air resistance increases with the object's speed, surface area, and shape, and can have a significant effect on the object's motion, especially at high speeds. For example, air resistance can cause a projectile to lose speed and altitude over time, or make it difficult for a vehicle to achieve high speeds. Understanding and accounting for air resistance is important in many fields, such as aerodynamics, physics, and engineering.

To know more about Motion visit:

https://brainly.com/question/22810476

#SPJ4

Answer:

 All particles of matter have mass, and they are composed of atoms.

The correct option is d. "equal to" is not a correct statement.

The statement "The age of Earth is equal to the age of the universe" is incorrect.

The current scientific estimate for the age of the universe is approximately 13.8 billion years, based on a variety of observations and measurements. In contrast, the age of the Earth is estimated to be around 4.54 billion years, based on radiometric dating of rocks and meteorites. Therefore, the correct option is d. "equal to" is not a correct statement.

The age of the cosmos, according to some of the finest scientists, will be 13.772 billion years old and 4.54 billion years for the planet.

We can therefore conclude from the foregoing that the universe is older than the planet.

The entire known universe is made up of space and all known matter.

The universe is the collective name for all the stars and galaxies, so to speak.

The universe, which was created shortly after the great big bang explosion and has been constantly expanding in all directions in space since that time, is estimated to be 13.8 billion years old. The Milky Way galaxy, which contains the solar system and all of its planets, is one of the galaxies that are included in it.

The solar system is only a few million years older than the planet, at roughly 5 billion years old. The Jovian planets and the terrestrial planets make up the solar system.

So, it may be inferred from looking at both of their ages that our solar system is roughly one-third as old as the universe.

Learn more about earth here :

brainly.com/question/14454625

#SPJ4

The speed of the cart at a height of 0.17 m above the bottom of the incline would be 3.90 m/s.

Let's call the speed of the cart at a height of 0.17 m above the bottom of the incline "v". We can calculate v using the following equation:

v^2 = 2 * g * (h1 - h2)

where

g = 9.8 m/s^2 (acceleration due to gravity)

h1 = 0.94 m (initial height)

h2 = 0.17 m (final height)

Plugging in the values, we get:

v^2 = 2 * 9.8 * (0.94 - 0.17)

v^2 = 2 * 9.8 * 0.77

v^2 = 15.156

v = sqrt(15.156)

v = 3.90 m/s

So the speed of the cart at a height of 0.17 m above the bottom of the incline would be approximately 3.90 m/s.

More on the speed of objects on an inclined plane can be found here: https://brainly.com/question/25804051

#SPJ1

The magnitude of the value of optical rotation does not depend on the concentration of the sample being measured.

define magnitude ?

Magnitude refers to the size, extent, or amount of something. It can also refer to the numerical value of a quantity, regardless of its sign. In physics, magnitude is often used to describe the size or strength of a physical quantity, such as the magnitude of a force, velocity, or acceleration.

Magnitude can be expressed in various units of measurement, such as meters, kilograms, or seconds, depending on the quantity being measured.

The magnitude of the value of optical rotation does not depend on the concentration of the sample being measured. This is known as the specific rotation, which is a characteristic property of a given compound at a given temperature, independent of the sample's concentration.

However, the observed rotation can be influenced by factors such as the wavelength of light used, the temperature, and the solvent used.

To learn more about magnitude follow the given link: https://brainly.com/question/11823989

#SPJ4

The correct claim the student can make is: B. The mass definitely stayed the same because the ranges of uncertainty overlap exactly.

A measurement of the quantity of matter in an item or system, mass is a basic physical characteristic of matter. Due to its scalar nature, it has simply magnitude and no direction. One of the most fundamental ideas in physics is mass, which is also connected to other key ideas like weight, force, and energy.

The kilogram is the SI unit of mass (kg). There are several ways to measure mass, but the most popular one is with a balance or a scale. A balance assesses an object's mass in relation to a recognized standard. Contrarily, a scale employs a force to overcome an object's gravitational pull before measuring the result.

To know more about mass visit:

https://brainly.com/question/15959704

#SPJ4

The frequency of its circular motion is[tex]2.67 *10^8 Hz[/tex]. This frequency represents the number of complete circles that the electron makes in one second. It is also known as the cyclotron frequency.

To calculate the speed of the electron, we need to use the equations for the motion of a charged particle in a magnetic field.

First, we can calculate the acceleration of the electron due to the potential difference. We know that the potential difference is 450 V, which is also equal to the electron's kinetic energy. Therefore, we can use the equation for kinetic energy:

[tex]KE =\frac{ 1}{2} mv^2[/tex]

where KE is the kinetic energy, m is the mass of the electron, and v is its velocity. We can rearrange this equation to solve for v:

[tex]v = \sqrt(\frac{2KE}{m})[/tex]

We know that KE = eV, where e is the charge of the electron and V is the potential difference, so we can substitute:

[tex]v = \sqrt(\frac{2eV}{m})[/tex]

where e is the elementary charge [tex](-1.602 * 10^{-19 }C)[/tex] and m is the mass of the electron[tex](9.109 *10^{-31} kg)[/tex]. Plugging in the values, we get:

[tex]v = \sqrt\frac{(2*(-1.602 *10^{-19} C)*(450 V)}{(9.109 * 10^{-31} kg)}) \\ = 6.02 x 10^6 m/s[/tex]

This is the initial speed of the electron as it enters the magnetic field.

Next, we need to consider the motion of the electron in the magnetic field. Since the electron's velocity is perpendicular to the magnetic field, it will experience a force that is perpendicular to both its velocity and the magnetic field. This force can be calculated using the equation:

F = qvB

where F is the magnetic force, q is the charge of the electron, v is its velocity, and B is the magnetic field strength.

The magnetic force will cause the electron to move in a circular path with a radius given by the equation:

[tex]r =\frac{ mv }{ (qB)}[/tex]

where r is the radius of the circular path.

Since we know the velocity of the electron and the magnetic field strength, we can calculate the radius of the circular path:

[tex]r = \frac{mv }{ (qB)}[/tex]

[tex]=\frac{ (9.109 * 10^{-31} kg) * (6.02 * 10^{6 }m/s) }{ (1.602 *10^{-19 }C * 0.170 T) }\\\\= 1.18 * 10^{-2} m[/tex]

Finally, we can use the speed of the electron and the radius of its circular path to calculate the frequency of its circular motion:

[tex]f =\frac{v}{ (2\pi r) }\\ = \frac{(6.02 * 10^{6 }m/s) }{ (2\pi * 1.18 * 10^{-2 }m)} \\= 2.67 * 10^{8 }Hz[/tex]

This frequency represents the number of complete circles that the electron makes in one second. It is also known as the cyclotron frequency, and is a useful parameter in many applications involving charged particles in magnetic fields.

Learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ4

Gas to liquid is the  phase change represents a decrease in entropy.

option B

The measurement of randomness or disorder in a system is known as entropy.

As for the order of entropy, The increase in disorder causes the entropy to rise when we transition from the solid state to the liquid state to the gaseous state. Entropy will decrease when we transition from a gaseous state to a liquid state and then a solid state because chaos is becoming less disorganized. Entropy rises for options 1, 3, and 4. whereas the entropy falls in option 2. Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive labor. Entropy is also a measure of molecular disorder since work is produced by ordered molecular motion.

To know more about entropy on

https://brainly.com/question/864622

#SPJ4

Far below the interface between the two liquids is the bottom of the block is 0.0268 m.

We need to do the Sum of forces in the y direction:

Now

∑F = ma

B₁ + B₂ − mg = 0

ρ₁V₁g + ρ₂V₂g − mg = 0

ρ₁V₁ + ρ₂V₂ = m

ρ₁V₁ + ρ₂V₂ = ρV

ρ₁Ah₁ + ρ₂Ah₂ = ρAh

ρ₁h₁ + ρ₂h₂ = ρh

Now

(930 kg/m³)h₁ + (1000 kg/m³)h₂ = (968 kg/m³) (4.93 cm)

Since the block is fully submerged, h₁ + h₂ = 4.93 cm.

Now

(930 kg/m³) (4.93 cm − h₂) + (1000 kg/m³)h₂ = (968 kg/m³) (4.93 cm)

h₂ = 2.68 cm

h₂ = 0.0268 m

What is a block?

To know more about blocks, click the link given below:

brainly.com/question/17638607

#SPJ1