can you guys help me with these things??? please!

The compound interest for two months will be $13.98. Then, after two months, there will be $ 4213.98 in the account.

Compound interest is the interest on normal interest. Compound interest for an amount p for a n years with a rate of interest R% can be calculated as follows:

A  = P [1 + r/100]ⁿ

Given that, the amount  p = $4200

rate of compound interest  = 2.1 %

time period n = 2 months, it is 0.16 years.

Now the compound interest for two months = $ 4200× [1 + 2.1/100]^0.16 - $4200 = $13.98

Now, the amount after two months will be $ 4213.9.

Therefore, there will be $4213.9 in the account after two months.

Find more on compound interest :

https://brainly.com/question/26457073

#SPJ1

Considering the frequency of non-polar bonds in each type of molecule, the molecule with the most potential energy should be the one with the highest number of non-polar bonds.

Non-polar bonds are stronger than polar bonds and so molecules with more of these bonds can store more energy due to their increased stability. For example, molecules with higher amounts of carbon-carbon and carbon-hydrogen bonds tend to have higher potential energies than molecules with more polar bonds such as oxygen-hydrogen bonds. Non-polar bonds are bonds between two atoms that have the same electronegativity, such as two atoms of carbon or two atoms of hydrogen. These bonds do not have a charge distribution and no molecules are attracted to them, which makes them non-polar. Polar bonds, on the other hand, are bonds between two atoms with different electronegativities, such as oxygen and hydrogen or nitrogen and hydrogen. These bonds have a partial charge distribution, which means that molecules are attracted to them, and this makes them polar.

To know more about electronegativity please refer:

https://brainly.com/question/17762711

#SPJ4

The pressure values for propane and butane after each addition of water were not always the same.

This is due to the fact that the vapor pressure of a liquid is directly related to its boiling point. Propane has a boiling point of -42.1°C, whereas butane has a boiling point of 0.5°C. This means that at a given temperature, propane will have a higher vapor pressure than butane, resulting in higher pressure values when the same amount of water is added to each gas. This can be expressed mathematically by the Clausius-Clapeyron equation, which states that the vapor pressure of a liquid is directly proportional to its temperature.

learn more about butane Refer:brainly.com/question/29147540

#SPJ4

The sodium ion concentration in the cytoplasm of a neuron increases when its sodium channels open.

This is because the opening of the sodium channels allows for the influx of sodium ions into the cytoplasm, leading to an increase in the content-loaded sodium ion concentration within the cell. As a result, the cytoplasm becomes more positively charged, which can lead to the generation of an action potential and the transmission of a nerve impulse.

The sodium channel itself is the membrane protein that conducts sodium ions (Na⁺) through a cell membrane. It is highly selective to transport sodium ions, which it achieves by encapsulation of the ion in a cavity of a larger molecule.

Learn more about sodium channels at https://brainly.com/question/15905781

#SPJ11

Soil can be conserved by removing trees. This statement is false.

Soil conservation is a set of practices used to keep soil from deteriorating. To begin with, soil conservation entails treating the soil as a living ecosystem. This entails continuously returning organic matter to the soil. Preventive maintenance on a car is analogous to soil conservation.

Organic or ecological farming entails reducing or eliminating the use of synthetic fertilizers and pesticides, as well as cultivating rich, long-term balanced soil fertility through techniques such as crop rotation, conservation tillage, and soil amendments such as compost and manure.

Thus,  Soil can be conserved by removing trees. This statement is false.

To learn more about the soil conservation, follow the link;

https://brainly.com/question/30333660

#SPJ1

5 moles of oxygen reacting with excess hydrogen will produce 180.15 g of water.

Hard water contains high levels of dissolved minerals, primarily calcium and magnesium ions. Water picks these minerals up as they pass through rocks, soil, and other natural materials.

Soft water is generally preferred for chemical reactions because it does not contain highly dissolved minerals. Hard water, however, can react with certain chemicals and interfere with the desired chemical reactions.

The balanced chemical equation for the reaction between oxygen and hydrogen to form water is 2H2 + O2 -> 2H2O.

The molar mass of water (H2O) is estimated to be 18.015 g/mol. Therefore, the mass of 10 moles of water will be 10 mol x 18.015 g/mol = 180.15 g

Therefore, 5 moles of oxygen reacting with excess hydrogen will produce 180.15 g of water.

To learn more about moles, visit here:

https://brainly.com/question/14357742

#SPJ1

Answer:

The Lewis structure for potassium chloride (KCl), which is an ionic compound, cannot be represented by a single Lewis structure. Ionic compounds do not have a covalent bond, instead they have an electrostatic attraction between positive and negative ions. In the case of potassium chloride, potassium (K) has a charge of +1 and chloride (Cl) has a charge of -1. The ionic compound can be represented by showing the positive and negative ions next to each other, separated by a dash or an arrow, like this:

K+ Cl-

Explanation:

Alternatively, it can be represented by a crystal lattice structure, which shows the repeating pattern of positive and negative ions in the solid compound.

The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.

What do you mean by molecules?

A molecule is a group of two or more atoms held together by chemical bonds. These atoms can be of the same or different types. Molecules are the smallest units of a compound that retain the chemical and physical properties of that compound.

Molecules play a critical role in many chemical reactions and biological processes. They can interact with each other through chemical reactions to form new compounds or release energy. Understanding the structure and behavior of molecules is fundamental to understanding many fields of science, including chemistry, biochemistry, and materials science.

The formula for Iron (III) oxide is Fe2O3, which means that there are 2 iron atoms and 3 oxygen atoms in one molecule of Fe2O3.

To find the number of moles of oxygen atoms in 1 mole of Fe2O3, we need to multiply the number of oxygen atoms per molecule by the Avogadro constant (6.022 x 10^23).

Number of moles of oxygen atoms in 1 mole of Fe2O3 = 3 x (6.022 x 10^23) = 1.8066 x 10^24

Therefore, there are 1.8066 x 10^24 oxygen atoms in 1 mole of Fe2O3.

Learn more about moles of oxygen click here:

https://brainly.com/question/29499360

#SPJ1

The net ionic equation for the given reaction is KCO₃ + MgCl₂---->MgCl₂ + KCl.

When aqueous solutions of potassium carbonate and magnesium chloride are combined, solid magnesium carbonate and a solution of potassium chloride are formed,then

KCO₃ + MgCl₂---->MgCl₂ + KCl. will form.

Like a molecular equation, which communicates compounds as particles, an ionic equation is a synthetic equation where the electrolytes in fluid arrangement are communicated as separated particles. Normally, this is a salt broken down in water, where the ionic species are trailed by (aq) in the situation to demonstrate they are in fluid arrangement.

The particles in fluid arrangements are balanced out by particle dipole cooperations with water atoms. Nonetheless, an ionic equation might be composed for any electrolyte that separates and responds in a polar dissolvable. In a fair ionic condition, the number and sort of particles are similar on the two sides of the response bolt. Furthermore, the net charge is similar on the two sides of the situation.

Solid acids, solid bases, and dissolvable ionic equations (typically salts) exist as separated particles in fluid arrangement, so they are composed as particles in the ionic condition.

To know more about ionic equation,visit here:

https://brainly.com/question/15466794

#SPJ4

Answer:

0.225 moles

Explanation:

Looking at the balanced equation, 4 moles of Fe(s) react with 3 moles of [tex]O_{2}[/tex](g) to produce 2 moles of [tex]Fe_{2}O_{3}[/tex](s). In other words, for every 3 moles of [tex]O_{2}[/tex] (g) used, there are 2 moles of product [tex]Fe_{2}O_{3}[/tex](s). The mole ratio is therefore 3:2. In other words, you  the moles of [tex]O_{2}[/tex] by [tex]\frac{3}{2}[/tex] to find the moles of product.

There are 0.15 moles of [tex]O_{2}[/tex], so the moles of product should be  3/2 of this according to the molar ratio.

0.15 * [tex]\frac{3}{2}[/tex] = 0.225

Your answer is 0.225 moles.

Hope this helps!

Sodium benzoate is the product from the reaction of benzoic acid with sodium hydroxide.

A chemical reaction is defined as a process in which one or more substances, also called reactants, are converted to one or more different substances, known as products.

When NaOH is added to benzoic acid it neutralizes the benzoic acid producing the benzoate ion, which now goes into the aqueous layer, leaving other other two organic compounds in the ether. Similarly, it can be observed that nitroaniline that is not soluble in neutral or basic conditions, but is soluble in acidic type solutions.

The balanced chemical reaction is given as,

C₆H₅COOH(s) + NaOH(aq) → C₆H₅COO⁻Na⁺(aq) + H₂O(l)

Learn more about chemical reaction from the link given below.

https://brainly.com/question/29039149

#SPJ4

Each element has its own unique atomic line spectrum because the spectral lines are related to the energy levels of electrons in the atom.

When an electron in an atom gains energy, it jumps to a higher energy level. When it falls back down to a lower energy level, it releases the excess energy in the form of a photon of light. The energy of the photon corresponds to the energy difference between the two levels. Since each element has a unique arrangement of electrons and energy levels, the energy of the photons released by each element is also unique. These photons create a specific pattern of spectral lines that can be used to identify the element.

The spectral lines are also affected by the presence of other atoms or molecules in the environment. This is why the spectra of elements in a gas, liquid, or solid state can be different. Additionally, the spectral lines can be broadened or split due to various factors, such as magnetic fields or temperature.
The study of atomic line spectra is an important field of spectroscopy, which has many practical applications in fields such as chemistry, physics, astronomy, and materials science.

Learn more about atomic line spectra here:

https://brainly.com/question/29236109

#SPJ4

Hi there, here's your answer:

Given the velocity of the dog v = 6.0 m/s

Momentum of the dog P = 60.0 kg m/s

To find:
The mass of the dog.

Solution:

We know that the formula for finding the momentum given the mass of a body and it's velocity is P = m × v.

Substituting the values, we get 60.0 = m × 6.0

Therefore, [tex]m = \frac{60.0}{6.0} = 10kg[/tex]

Thus, the mass of the dog is 10kg.

Hope it helps! Please mark as Brainliest!

The large display can show readings in an extended range from -2.0 to 16.0 pH and temperature from 0°C to 90°C. It can also simultaneously display both of these values so that users can easily compare them.

This means it can display the pH and temperature values of a wide range of solutions and other substances. It can also simultaneously display both of these values so that users can easily compare them. This can be useful for monitoring and analyzing changes in pH or temperature over time, or for analyzing the relationship between pH and temperature.

To know more about pH please refer:

https://brainly.com/question/15289741

#SPJ4

Option (b) is correct. Functional group describes a special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients.

Functional groups are classified as any of numerous combinations of atoms that form parts of chemical molecules that undergo characteristic reactions themselves. In many cases it influence the reactivity of the remainder of each molecule. The concept of functional groups is useful as a basis for classification of large numbers of compounds according to their reactions. Some examples of the common functional groups are hydroxyl present in alcohols and phenols, carboxyl present in carboxylic acids, carbonyl present in aldehydes, ketones and quinones. In a simple way it is defined as an atom or group of atoms within a molecule that has similar chemical properties whenever it appears in various compounds even if other parts of the molecule are quite different.

To learn more about Functional group please visit:

https://brainly.com/question/27879244

#SPJ4

The complete question is,

which of the following best describes a functional group?

multiple choice question.

(a) large molecules comprised of a glycerol and three fatty acid chains

(b) special combinations of atoms that attach to hydrocarbon chains and rings to form organic nutrients

(c) molecules that are composed of hydrogen and carbon in a long chain or ring-like structure

(d) large molecules composed of two or more repeating smaller units

An ionic compound will dissolve when the attraction between the polar molecules and the ions is greater than the attraction between the ions themselves.

Polar motes A polar patch is generally formed when the one end of the patch is said to retain more positive charges and whereas the contrary end of the patch has negative charges, creating an electrical pole. When a patch is said to have a polar bond, also the centre of the negative charge will be on one side, whereas the centre of positive charge will be in the different side. The entire patch will be a polar patch.

Ion, any snippet or group of tittles that bears one or further positive or negative electrical charges. appreciatively charged ions are called cations; negatively charged ions, anions. Ions are formed by the addition of electrons to, or the junking of electrons from, neutral tittles or motes or other ions.

Learn more about Ionic compound:

https://brainly.com/question/29348041

#SPJ4

Answer:

Arrhenius defined an acid as a substance that dissociates in water to produce hydrogen ions (H+) as the sole cation.

Explanation:

Tell me if you still confuse

ALLEN

Calculate the amount of 0.1 M PMSF required to make a final concentration of 1 mM in 200 ml of extraction buffer: 1 mM = 0.001 M moles of PMSF = 0.001 M x 0.2 L = 0.0002 moles volume of 0.1 M PMSF required = moles / molarity = 0.0002 moles / 0.1 M

To make 200 ml of extraction buffer with the desired concentrations, we need to calculate the amounts of each stock solution that we need to add. Here are the steps to follow:

Calculate the amount of 1 M Tris base required to make a final concentration of 10 mM in 200 ml of extraction buffer:

10 mM = 0.01 M

moles of Tris = 0.01 M x 0.2 L = 0.002 moles

volume of 1 M Tris base required = moles / molarity = 0.002 moles / 1 M = 0.002 L or 2 ml

Therefore, add 2 ml of 1 M Tris base to the solution.

Calculate the amount of 1 M HCl required to adjust the pH to 7.4:

The pH of the 1 M Tris solution is approximately 12.1. To adjust the pH to 7.4, we need to add HCl to the solution. The amount of HCl required can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the dissociation constant of Tris (8.1), [A-] is the concentration of Tris- (which is the same as the concentration of HCl we will add), and [HA] is the concentration of the protonated form of Tris.

Rearranging the equation, we get:

[A-]/[HA] = 10²(pH - pKa)

Substituting the values, we get:[HCl]/[Tris+] = 10²(7.4 - 8.1) = 0.158

[Tris+] = 0.01 M (since we are aiming for a 10 mM Tris concentration)

Solving for [HCl], we get:

[HCl] = 0.158 x 0.01 M = 0.00158 M

moles of HCl required = 0.00158 M x 0.2 L = 0.000316 moles

volume of 1 M HCl required = moles / molarity = 0.000316 moles / 1 M = 0.000316 L or 0.32 ml

Therefore, add 0.32 ml of 1 M HCl to the solution to adjust the pH to 7.4.

Calculate the amount of 0.2 M 2-mercaptoethanol required to make a final concentration of 1 mM in 200 ml of extraction buffer:

1 mM = 0.001 M

moles of 2-mercaptoethanol = 0.001 M x 0.2 L = 0.0002 moles

volume of 0.2 M 2-mercaptoethanol required = moles / molarity = 0.0002 moles / 0.2 M = 0.001 L or 100 µl

Therefore, add 100 µl of 0.2 M 2-mercaptoethanol to the solution.

1 mM = 0.001 M

moles of PMSF = 0.001 M x 0.2 L = 0.0002 moles

volume of 0.1 M PMSF required = moles / molarity = 0.0002 moles / 0.1 M

learn more about concentration here:

https://brainly.com/question/10725862

#SPJ4

When force is applied to the objects, then the shape of some objects deforms. It modifies the relative locations of the crystal lattice's constituent particles.

Interatomic or intermolecular forces begin to operate as soon as that occurs, and they have a tendency to return the solid to its former configuration. Force is defined as a physical quantity that has the power to alter an object's condition and shape. A force imparted to an object causes it to alter shape. For instance, a piece of metal changes shape when hit with a hammer. A contact force that is applied to an object externally is referred to as an applied force. The object moves or deforms as a result of the applied force. In general, an object moves in the direction of a force. Assume a pulley is used to raise it off the ground. In that situation, the object is moving in the opposite direction from where the force is being applied.

Here is more information about intermolecular force: brainly.com/question/14220340

#SPJ4

The current atmospheric concentration of carbon dioxide is 40 in 250 years ago

Long-term changes to weather patterns and temperatures are a result of climate change.

The use of fossil fuels (such as coal, oil, and gas), which release heat-trapping gases, has been the primary cause of climate change since the 250s, despite the fact that these changes are natural.

Global warming is the long-term increase in the planet's average temperature.

Even while there has been a long-term warming trend, the usage of fossil fuels over the past century has caused the pace of acceleration to increase.

The usage of fossil fuels has expanded along atmospheric concentration  with the global population.

Learn more about atmospheric concentration here

https://brainly.com/question/25312838

#SPJ4

The change in enthalpy (Δh) between the initial and final state is [tex]-48270 kJ[/tex]

The change in enthalpy (Δh) between the initial and final state can be calculated using the following equation:

Δ[tex]h = m (h2 - h1)[/tex]

where m is the mass of water vapor, h1 is the enthalpy of the initial state and h2 is the enthalpy of the final state.

Since the initial state is at 300 kPa and 200°C, the enthalpy of the initial state (h1) can be calculated using the steam tables. From the steam tables, the enthalpy of the initial state (h1) is 2760 kJ/kg.

The final state is at 175 kPa and a quality of 50%. The enthalpy of the final state (h2) can also be calculated using the steam tables. From the steam tables, the enthalpy of the final state (h2) is 1703 kJ/kg.

Now, the mass of water vapor (m) in the closed piston-cylinder device can be calculated using the ideal gas law equation.The following equation is the ideal gas law:

[tex]PV = mRT[/tex]

where R is the gas constant, T is the temperature, V is the volume, m is the mass, and P is the pressure.

Since the volume of the closed piston-cylinder device is 5 liters and the temperature is 200°C, the mass of the water vapor (m) can be calculated as follows:

[tex]m =\frac{ (300 kPa * 5 liters)}{ (0.287 *323.15 K)}[/tex]

Therefore, the mass of the water vapor (m) is 41.6 kg.

Finally, the change in enthalpy (Δh) between the initial and final state can be calculated using the equation given above. Thus,

Δ[tex]h = 41.6 (1703 - 2760) = -48270 kJ[/tex]

Therefore, the change in enthalpy (Δh) between the initial and final state

is [tex]-48270 kJ[/tex].

learn more about enthalpy Refer:brainly.com/question/13996238

#SPJ4

Comparing the four solutions above, the vapour pressure of a 0.4 M CH4 (methane) solution is lowest. This is due to the fact that a solution's vapour pressure is directly inversely proportional to the mole fraction of the solvent.

When the rate of evaporation and condensation are equal, the pressure that a substance's vapour exerts in a closed container is referred to as vapour pressure. It is an indicator of a substance's propensity to evaporate and is influenced by variables including temperature, surface area, and intermolecular forces. A substance with a higher vapour pressure will evaporate more quickly than a substance with a lower vapour pressure at a given temperature. Chemistry, physics, and material science are just a few of the scientific and engineering disciplines where vapour pressure is an important feature. It has significant effects on how liquids and gases behave, including boiling temperatures, distillation, and phase transitions.

Learn more about  vapour pressure here:

https://brainly.com/question/14123284

#SPJ4

0.0174 M is the calculated [H₃O+] for 0.0087 M H₂SO₄.  Molarity is an important concept in chemistry.

Molarity, which is defined as the number of moles of solute dissolved per liter of solution, is a measure of a solution's concentration. It is often written with the symbol "M" and is measured in moles per liter (mol/L) units.

The molarity of a solution is determined by dividing the volume of the solution in liters by the number of moles of the solute present in that volume. because it allows us to quantify the amount of substance present in a solution. It is frequently used in stoichiometric calculations to determine the amounts of a chemical reaction's reactant and product that should be known. For instance, if a solution contains 2 moles of solute dissolved in 1 liter of solution, the molarity of the solution is 2 mol/L.

Because it fully dissociates in water, H₂SO₄ is a powerful acid that produces two H+ ions for every molecule that dissociates. As a result, the [H₃O+] in a solution of 0.0087 M H₂SO₄ is twice as molten as the H₂SO₄ solution: [H₃O+] = 2 x [H+] = 2 x 0.0087 M = 0.0174 M.

Accordingly, the [H₃O+] of a H₂SO₄ solution containing 0.0087 M is 0.0174 M.

Learn more about Molarity:

brainly.com/question/14469428

#SPJ1

D. The lines connect points of equal air pressure.

The total amount of heat required to evaporate hundred gram of liquid Ammonia at its boiling point is found to be 28 KJ.

The enthalpy of vaporization from liquid ammonia is given to be 4.8 kilo joule per mole.

The mass of the liquid ammonia is 100 grams.

The formula to find the amount of heat required to evaporate this ammonia is given by,

Q = nL

Where, m is the moles of ammonia and L is the latent heat of vaporization.

Putting all the values,

Q = 100/17 x 4.8 KJ/mol

Q = 28 KJ

So, a total of 28 kilo joules of energy will be required to evaporate these ammonia.

To know more about heat of vaporization, visit,

https://brainly.com/question/26306578#:~:text=Expert%2DVerified%20Answer&text=The%20heat%20absorbed%20by%20the,vaporize%201%20gram%20of%20liquid.

#SPJ4

Statement 3, which claims that equimolar amounts of bromine and the hydrocarbon are employed, is the only one that can be evaluated to be true or untrue based on the information provided.

A type of organic substances known as hydrocarbons is made up of carbon and hydrogen atoms. They are the most basic kind of organic chemicals and are present in both natural and artificial sources, such as plant oils, natural gas, and fossil fuels. Alkanes, alkenes, alkynes, and aromatic hydrocarbons are some of the several structural subgroups that can be categorised according to their physical and chemical characteristics. Many crucial chemicals and goods, including plastics, detergents, and medications, are produced using hydrocarbons as fuels, solvents, lubricants, and raw ingredients. Their use, however, can also result in environmental issues including air pollution and climate change.

Learn more about hydrocarbon here:

https://brainly.com/question/17578846

#SPJ4

Which statement among the given statements about a chemical reaction involving bromine and a hydrocarbon can be evaluated as true or false based on the information provided, and why are the other statements not able to be evaluated in the same way?

The average rate of the reaction during the first 13.0 seconds is 0.00523 liters per second. The average rate of a reaction is a useful concept in chemical kinetics that allows us to study the rates of chemical reactions and the factors that affect these rates.

The average rate of the reaction during the first 13.0 seconds can be calculated as follows:

First, convert the amount of O2 produced from moles to liters using the volume of the reaction vessel:

0.018 mol x (0.380 L/1 mol) = 0.0684 L

Then, divide the volume of O2 produced by the time interval to obtain the average rate of the reaction:

0.0684 L / 13.0 s = 0.00523 L/s

So the average rate of the reaction during the first 13.0 seconds is 0.00523 liters per second.

The average rate of a reaction during a certain time interval is a measure of the change in the concentration of a reactant or product over that time interval. It is a useful concept in chemical kinetics, which is the study of the rates of chemical reactions and the factors that affect these rates.

In general, the average rate of a reaction can be calculated as the change in the concentration of a reactant or product over a given time interval, divided by the time interval. In this case, the average rate of the reaction was calculated as the change in the volume of O2 produced over a 13.0 second time interval, divided by the time interval.

The average rate of a reaction can be used to determine the overall rate of a reaction, as well as to study how the rate of a reaction changes over time. By measuring the average rate of a reaction at different points in time, it is possible to study the rate-determining step of a reaction and to determine the order of a reaction with respect to each reactant.

Learn more about average rate here:

https://brainly.com/question/21766719

#SPJ4

Today was a difficult day. The sun's rays seemed to beat down on us like never before - the heat was unbearable.

What do you mean by the ozone layer?

The ozone layer is a region of Earth’s atmosphere located in the stratosphere, between 10 and 30 km above Earth’s surface. It is composed of ozone molecules, which are made up of three oxygen atoms (O3). The ozone layer acts as a shield, blocking most of the ultraviolet radiation from the sun. This helps protect life on Earth from the harmful effects of UV radiation.

I can only imagine what life would be like without the ozone layer. Without the ozone layer protecting us, we are exposed to the damaging rays of the sun, including UV radiation.

The air quality is also much worse. With the ozone layer gone, there would be a huge increase in the amount of pollution in the air, leading to much more severe health issues for people than we currently experience.

It's also getting harder and harder to grow food. With the depletion of the ozone layer, crops are being destroyed by the intense heat, leaving us with much less food than we used to have.

It's a struggle to get through each day without the ozone layer. I miss the days when I could go outside and be comfortable, rather than feeling like I'm suffocating from the heat.

It's so hard to see the world suffer from the lack of an ozone layer. I can only hope that something is done soon to save us from this reality.

To know more about the ozone layer,

https://brainly.com/question/833767

#SPJ1

The mass (in grams) of H₂ gas produced when 14.3 g of aluminum dissolves in the acid is 1.6 g

First, we shall determine the reacting mass of Al and the mass of H₂ produced from the balanced equation. This is shown below

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Finally, we shall determine the mass of H₂ produced when 14.3 g aluminum, Al dissolves. Details below:

From the balanced equation above,

54 g of Al reacted to produce 6 g of H₂

Therefore,

14.3 g of Al will react to produce = (14.3 × 6) / 54 = 1.6 g of H₂

Thus, the mass of H₂ produced is 1.6 g

Learn more about mass:

https://brainly.com/question/9526265

#SPJ1

Complete question:

Sulfuric acid dissolves aluminum metal according to the following reaction:

2Al(s) + 3H₂SO₄(aq) -> Al₂(SO₄)₃(aq) + 3H₂(g)

Suppose you wanted to dissolve an aluminum block with a mass of 14.3g. How many grams of H₂ gas would be produced by the complete reaction of the aluminum block?