False. The golf courses comprise more area for cemeteries than in the united states. It occupies over 2 million acres and has a larger area.
In the early 2000s, the economy of golf grew tremendously and exceeded its financial and national income. Gradually golf became a global sport, it gained a lot of popularity and audience over the last decade.
There are about 15,000 golf courses in the US and they exceed 2 million acres, more significant than the state of Delaware. Courses and cemeteries are basically the same things, golf courses are just likely to be built next to cemeteries.
One great example of this intersection of courses and cemeteries is Trump Golf Links at Ferry Point in New York. Bloomberg has an in-depth look at how the land was used in the United States and Golf leaves a significant mark.
To learn more about golf courses visit :
https://brainly.com/question/30307930
Compared to the United States, there is greater space for cemeteries on golf courses. It has a greater extent and takes up more than 2 million acres. Thus, the given statement is false.
What is the purpose of a golf course?The area where golf is played is called a golf course. It comprises of a succession of holes, each consisting of a tee box, a fairway, the rough and other hazards, and a green with a cylindrical hole in the ground, known as a "cup". A "pin," or flagstick, is kept in the cup.
Most golf courses have 18 different holes since a typical game of golf consists of 18 holes; however, there are numerous 9-hole courses and some that feature holes with shared fairways or greens. Also, there are courses with a very high number of holes, like 12 or 14. A standard score is provided for each hole on the vast majority of golf courses, which have a range of lengths and difficulty.
Learn more about the golf course here:
https://brainly.com/question/11142395
#SPJ2
Why were camels important to the Bedouins of the Arabian Peninsula?
Responses
a. Camels can travel much faster than horses.
b. Camels allowed the Bedouins to survive in the desert.
c. Camels provide transportation in areas cars cannot go.
d. Camels helped the Bedouins to establish large farms.
C. Camels provide transportation in areas cars cannot go.
This is Labro, a tiny mountain village in which country? A. Italy B. Portugal C. Peru
Labro is a tiny mountain village located in Italy. Specifically, it is situated in the region of Lazio, which is in central Italy. The village is known for its picturesque location, historic architecture, and beautiful mountain scenery.
Describe region of Lazio?Lazio is a region located in central Italy, with Rome as its capital city. It covers an area of 17,207 square kilometers and has a population of approximately 5.8 million people. Lazio is bordered by the regions of Tuscany, Umbria, Marche, Abruzzo, Campania, and Molise.
Lazio is known for its rich history and cultural heritage, and is home to many famous landmarks and attractions. Rome, which is the capital city of both Lazio and Italy, is a major center of art, culture, and politics, and attracts millions of visitors every year to its many museums, galleries, and historical sites.
In addition to Rome, Lazio is home to many other notable cities and towns, including Latina, Viterbo, and Frosinone. The region is also known for its beautiful natural scenery, which includes the Apennine Mountains, the Tyrrhenian Sea, and many lakes and rivers.
Lazio is an important center of industry, commerce, and agriculture, with a diverse economy that includes manufacturing, tourism, and service sectors. The region is also known for its excellent cuisine, which features many traditional Italian dishes such as pasta, pizza, and seafood.
Overall, Lazio is a diverse and fascinating region that offers something for everyone, whether you are interested in history, art, culture, or simply enjoying the beautiful natural scenery and delicious food.
To know more about economy visit:
https://brainly.com/question/29775102
#SPJ1
how do lithospheric mantle and asthenosphere differ from each other?
The lithosphere is the outermost mechanical layer, which is brittle and rigid. The asthenosphere is a solid upper mantle material that is so hot that it can flow and behaves plastically. The lithosphere is supported by the asthenosphere.
The lithosphere and asthenosphere have a symbiotic relationship in which the lithosphere floats on top of the asthenosphere. The movement of the asthenosphere can cause the lithosphere's rocky plates to move.
The lithosphere is Earth's solid outer layer. The lithosphere consists of the brittle upper portion of the mantle and the crust, the Earth's outermost layers. It is bounded above by the atmosphere and below by the asthenosphere (another part of the upper mantle).
Learn more about lithospheric mantle
https://brainly.com/question/20289647
#SPJ4
Why is surface water near the Equator not likely to sink down into the deep ocean?Because water near the Equator is much warmer than the deep ocean so there is no density difference between the surface and deep oceanBecause water near the Equator is much warmer than the deep ocean so the surface water is much less dense and will not sinkBecause water near the Equator is saltier than the deep ocean so the surface water is much more dense and will not sink
Option c) The surface water is much denser and will not sink because the water near the Equator is saltier than the deep ocean.
The deep sea is the ocean depth at which light begins to fade, which is about 200 meters (656 feet) deep, or the point where continental shelves meet continental slopes.
Low temperatures, darkness, and high pressure are the characteristics of the deep sea. Due to the extreme conditions that make it difficult to access and explore the environment, the deep sea biome is the least explored on Earth.
Near the equator, is the water saltier and denser?Although for different reasons, the average salinity decreases significantly near the equator and at both poles. The tropics receive the most precipitation on a regular basis close to the equator. Consequently, the fresh water that falls into the ocean contributes to the reduction of the salinity of the region's surface water.
Learn more about deep ocean
brainly.com/question/21654036
#SPJ4
which physical property is determined by the salinity and temperature of ocean water?
A mathematical function of temperature, salinity, and pressure known as an equation of state is typically used to calculate density.
What factors influence ocean water's salinity?Evaporation, precipitation, ice formation, and ice melting all affect seawater's salinity. Seawater's salinity rises as a result of evaporation because salts remain in the water after it evaporates, increasing their concentration.
Is water's salinity a physical property?Physical oceanography relies heavily on seawater's temperature, salinity, pressure, density, and related quantities like potential density, heat capacity, sound speed, and others.
To learn more about density here:
https://brainly.com/question/29775886
#SPJ4
Why is understanding the structure of the earth important in 5 ways
Answer:
We can learn to minimize our risks from earthquakes, volcanoes, slope failures, and damaging storms. We can learn how and why Earth's climate has changed in the past, and use that knowledge to understand both natural and human-caused climate change.
Explanation:
death valley is bounded by normal faults on the east and west sides and by strike slip faults on the northern and southern ends. if movement on these faults, and the faults that they are connected to along the western margin of the basin and range province, continues with similar displacement rates and directions what is the likely outcome for the death valley region? could the development of the gulf of california and separation of baja california from mainland mexico give us a clue? for this exam assignment you will write an essay of about 1000 words predicting the future of the death valley region over millions of years. to answer this you will need to investigate when the gulf of california opened, the rate and direction of motion that baja california is moving compared to north america, and what tectonic plate the baja peninsula is part of today. on the basis of current plate motions could similar events and processes occur in the death valley region? think about what tectonic plate most of the state of california will be part of in approximately 5 or 10 million years if the plate motion continues in the same way. could the los angeles area wind up adjacent to reno, nevada? be sure to briefly discuss the regional plate tectonic setting of death valley including the location of plate boundaries and relative plate motions. you should use at least three sources that need to be referenced in a standard in-line format that allows them to be verified. a complete list of citations should be included at the end of the essay. your work must be original and will be checked with turnitin. the citation list should not be included in the 1000 words limit for the essay.
The modern fault system in Death Valley is a little more intricate. A normal fault zone connects a network of two strike-slip fault zones. The two strike-slip faults are moving laterally (side to side), pulling apart the typical fault zone.
Burchfiel and Stewart (1966) initially proposed the existence of this kind of extensional zone, known as a pull-apart basin, which is responsible for the Badwater Basin's descent to the lowest point in North America. Although the exact chronology of the tectonic change is uncertain, Norton (2011) theorises that it took place about 3 million years ago. These continuous geologic pressures continue to alter the Badwater Basin.
Learn more Death Valley here:
https://brainly.com/question/2100307
#SPJ4
Rocks around the world contain evidence that ___ have advanced and retreated and ______ have been uplifted and eroded.
Rocks from all around the world provide proof of the advance and retreat of glaciers as well as the uplift and erosion of mountains.
Massive sheets of ice that gently travel across the landscape are known as glaciers. Glacier movement can result in erosion, deposition, and other geological changes. Glaciers leave recognisable traces on the landscape, such as bedrock cuts and grooves as well as silt piles that are not well sorted. In contrast, tectonic processes that drive the Earth's crust to elevate and deform result in the formation of mountains. Mountains may gradually erode over time as a result of a number of processes, including weathering, water and wind erosion, and mass wasting. It is possible to deposit the eroded material elsewhere to create new sedimentary rocks. The evidence found in rocks found all throughout the planet therefore implies that glaciers have advanced .
To know more about the Glaciers, click on the link
https://brainly.com/question/19709729
#SPJ4
ground turkey must be cooked to an internal temperature of 165 why?
The reason why ground turkey must be cooked to an internal temperature of 165 degrees Fahrenheit is to kill any harmful bacteria that may be present in the meat.
Ground turkey, like all ground meat, is at a higher risk for bacterial contamination, especially if it has been handled improperly or not stored at the correct temperature. In particular, ground turkey may contain salmonella, which can cause food poisoning if ingested.
Cooking the meat to an internal temperature of 165 degrees Fahrenheit ensures that any harmful bacteria are destroyed and that the meat is safe to eat.
It is important to use a food thermometer to check the internal temperature of the meat, as visual cues such as color are not reliable indicators of whether the meat is fully cooked.
For more questions like Ground turkey click the link below:
https://brainly.com/question/4400651
#SPJ4
(URGENT) ANSWER ALL THESE QUESTIONS ASAP PLEASE I NEED THIS LIKE RIGHT NOW
1. In what type of pressure system does it rain the most often?
2. What in your biome creates its climate? (factors)
3. If your biome was elevated an extra 800 meters, how would climate change?
4. If there were two suns equally distant from the Earth in the north and south. What would the climate look like?
5. How will the weather change in the future due to climate change?
It rains the most often in low-pressure systems, also known as cyclones or depressions.
The climate in a biome is created by a combination of factors, including latitude, altitude, topography, prevailing winds, and proximity to bodies of water.
What is a pressure system?Generally If a biome was elevated an extra 800 meters, the climate would generally become cooler and drier due to the decrease in atmospheric pressure and temperature with altitude.
It is impossible for there to be two suns equally distant from the Earth in the north and south, as this would violate the laws of physics. Therefore, it is not possible to determine what the climate would be like under such conditions.
The weather will change in various ways in the future due to climate change, including more frequent and intense heat waves, droughts, wildfires, and extreme precipitation events. The effects will vary by region and depend on the amount of greenhouse gases emitted into the atmosphere.
Read more about pressure system
https://brainly.com/question/13994113
#SPJ1
Answer:
1. In a low-pressure system, it rains the most often.
2. The factors that create the climate of a biome include temperature, precipitation, humidity, air pressure, and wind.
3. Elevating a biome by 800 meters would likely cause the climate to become cooler and more arid. This is because as altitude increases, air pressure decreases, the amount of oxygen in the air decreases, and atmospheric temperature decreases. Additionally, the lower temperatures would result in less evaporation leading to drier conditions.
4. If there were two suns equally distant from the Earth in the north and south, the climate would be significantly warmer than it is currently. This is because the increased amount of sunlight would cause temperatures to rise and the presence of two suns in the sky would also add to the overall solar radiation reaching the surface of the Earth. Additionally, the increased temperatures would lead to increased evaporation and more precipitation, resulting in wetter and more humid conditions.
5. Climate change is expected to cause an increase in global temperatures, rising sea levels, and more extreme weather events, such as floods, droughts, hurricanes, and heat waves. It is also likely to cause changes in habitats, including the destruction of coral reefs, deforestation, and changes in agricultural patterns.
a. What was the primary goal of the Catholic church and monarchy of Spain, Portugal, and England? What did they have to gain?
b. What are the 7 laws?
c. What are the principles of life as quoted by Shawnee Chief Tecumseh, which of these 7 Laws and principles do you believe hold the most efficacy in your life?
The primary goal of the Catholic Church and monarchies of Spain, Portugal, and England was to propagate Christianity, promote their own unique faith, and strengthen their political and economic dominance.
The seven commandments of the Catholic Church were to regard God and the Catholic Church, respect the Church and the Kings, behave with charity and humility, abide by the Church's rules, show reverence for sacred objects, observe the Sabbath as a holy day, and be true to one's spouse.
Shawnee Chief Tecumseh's life ideals were to respect all living things, live in harmony with nature, uphold one's word, respect the beliefs of others, act with courage and integrity, and seek to construct a better future.
The most significant of these rules and principles in my life, in my opinion, is to behave with bravery and honesty.
True success and happiness in life depend on one's capacity to accept responsibility for their actions, stand up for what they believe in, and interact with people in an honest and sincere manner.
To learn more about monarchies visit:
https://brainly.com/question/1430440
#SPJ4
subduction zones occur a what type of plate boundary?
the Subduction zones occur at convergent plate boundaries where two tectonic plates move towards each other.
the Subduction zones occur at convergent plate boundaries where two tectonic plates move towards each other. One plate is usually denser than the other and subducts or sinks beneath the other plate, forming a very deep trench. The subducting plate is usually an oceanic plate while the overriding plate can be either an oceanic or a continental plate.
As the oceanic plate subducts, it heats up and melts, forming magma. The magma rises and can trigger volcanic eruptions, leading to the formation of volcanic
For more such questions on plate boundary.
https://brainly.com/question/17795544
#SPJ4
Sand found in commercial sand and gravel deposits is typically composed of silicate minerals. a) True.b) False
a) True. Sand found in commercial sand and gravel deposits is typically composed of silicate minerals.
Sand found in commercial sand and gravel deposits is typically composed of silicate minerals, which are the most abundant minerals in the Earth's crust. Silicate minerals are composed of silicon and oxygen atoms, along with other elements such as aluminum, magnesium, iron, and calcium. Sand is often formed by the weathering and erosion of rocks containing silicate minerals, such as granite, basalt, and quartz, which are then transported by rivers or wind and deposited in sand and gravel deposits.
Sand is a naturally occurring granular material composed of rock fragments, mineral grains, and other small particles. The most common minerals found in sand are silicate minerals, which make up the majority of the Earth's crust. Silicate minerals are formed from a combination of silicon and oxygen atoms, and often include other elements such as aluminum, magnesium, iron, and calcium.
The most common type of silicate mineral found in sand is quartz, which is composed of silicon and oxygen atoms arranged in a crystal lattice structure. Other common silicate minerals found in sand include feldspar, mica, and hornblende.
To learn more about Silicate minerals, click here:
https://brainly.com/question/6868721
#SPJ4
now we know that current velocity, or energy, and sediment size are correlated. high velocities only allow large grains to settle out, and only low velocities can allow for very fine grains to settle out and be deposited. so, how do graded beds form? they must represent a transition from a high to low energy current because they possess a transition from large to small grains. turbidity currents are water currents that are heavy because they possess a high sediment concentration. they commonly start as slope failures in shallow marine settings like a lake or ocean margin, then travel down the sloped margin, eventually depositing their loads at the bottom where it flattens out. sediment layers deposited by these currents are called turbidites. in this activity, choose from statements about turbidity currents and graded-bed formation as exemplified in the gigapan image. read the following statements and select which are true. specifically, focus on the relationships between grain size and velocities in turbidity currents.
D Turbidity currents have high concentrations of sediments, making them heavy enough to travel down slopes coherently, even in marine environments.
E. In the Gigapan image, the sedimentary layers can be described as turbidites that were formed by repeated deposition of sediments from turbidity currents in a marine setting.
This outcrop was formed when turbidity currents repeatedly deposited sediments as individual layers in a marine setting. These layers then lithified into sedimentary rock. The rocks were later slightly deformed and metamorphosed and then brought to the surface by erosion for us to investigate.
Investigating the patterns, textures, and sedimentary structures within sedimentary rocks is one of the best ways to reconstruct past environmental conditions from the rock record. Sedimentary rocks that have undergone little to no deformation, like here, provide some of the most critical pieces of information that allow geologists to reconstruct the history and evolution of Earth’s near-surface conditions.
Learn more about sediment
https://brainly.com/question/14306913
#SPJ4
Full Question : Now we know that current velocity, or energy, and sediment size are correlated. High velocities only allow large grains to settle out, and only low velocities can allow for very fine grains to settle out and be deposited. So, how do graded beds form? They must represent a transition from a high to low energy current because they possess a transition from large to small grains.
Turbidity currents are water currents that are heavy because they possess a high sediment concentration. They commonly start as slope failures in shallow marine settings like a lake or ocean margin, then travel down the sloped margin, eventually depositing their loads at the bottom where it flattens out. Sediment layers deposited by these currents are called turbidites. In this activity, choose from statements about turbidity currents and graded-bed formation as exemplified in the Gigapan image. Read the following statements and select which are true. Specifically, focus on the relationships between grain size and velocities in turbidity currents.
Select the two that apply.
a. Sedimentary rocks like these are made from mud only.
b. The fractures in the rock affected the way in which the sedimentary layers were deposited.
c. The sediments exposed in this outcrop were likely deposited in a single, massive turbidity current.
d. Turbidity currents have high concentrations of sediments, making them heavy enough to travel down slopes coherently, even in marine environments.
e. In the Gigapan image, the sedimentary layers can be described as turbidites that were formed by repeated deposition of sediments from turbidity currents in a marine setting.
the area where we find the most active volcanoes are along the______
The name of the are is "Pacific Ring of Fire".
The further explanation tells us about the:
In South America, all active volcanoes are located in the Andes Mountain Range.
They cluster in three specific areas:
Southern Colombia, and Northern and Central Ecuador, some of the volcanoes are: Nevado del Ruiz, Cotopaxi and Chimborazo.Southern Peru and Northern Chile, some volcanoes in this area are: Ojos del Salado and Misti.Southern Chile, some volcanoes in this area are: Villarica Volcano and Osorno Volcano.For more questions like Pacific Ring visit the link below:
https://brainly.com/question/28997535
#SPJ4
What mountain range extends from the black sea to the caspian sea?
The Caucasus, also known as the Russian Kavkaz, is a mountainous area between the Black Sea in the west and the Caspian Sea in the east that is inhabited by Russia, Georgia, Azerbaijan, and Armenia.
The Iranian plateau and the south Caspian Sea are separated by the Alborz mountain range. It has sedimentary strata that range in age from the Upper Devonian to the Oligocene, with Jurassic limestone predominating atop a granite core, and is only 60–130 km broad. The Crimean Mountains, located in southern Crimea, the Pontic Mountains (Kaçkar Dalar), in northern Anatolia, the Strandzha, a tiny mountain range in southeast Bulgaria, and the Caucasus Mountains are the principal mountain ranges that border the Black Sea. The Caucasus Mountain Range, or simply the Caucasus Mountains, is the name of the mountain range that spans the Black and Caspian Seas. Russia, Georgia, Azerbaijan, Armenia, Turkey, and Iran all have territories in the Caucasus, a hilly isthmus of territory wedged between the Black Sea and the Caspian Sea. The 700 km (430 mi) long (Russian: aнал "враи") Eurasia Canal would run through the Kuma-Manych Depression and connect the Black Sea to the Caspian Sea. Currently, this path is occupied by a number of lakes and reservoirs as well as the shallow irrigation Kuma-Manych Canal. is sometimes referred to as the Caucasus Mountain Range or simply as the Caucasus Mountains. Russia, Georgia, Azerbaijan, Armenia, Turkey, and Iran all have territories in the Caucasus, a hilly isthmus of territory wedged between the Black Sea and the Caspian Sea. The 700 km (430 mi) long (Russian: aнал "враи") Eurasia Canal would run through the Kuma-Manych Depression and connect the Black Sea to the Caspian Sea. Currently, this path is occupied by a number of lakes and reservoirs as well as the shallow irrigation Kuma-Manych Canal.
Learn more about mountain here :
https://brainly.com/question/14019191
#SPJ4
Describe 6 ways human activities affect animal habitats. Prescribe ways of solving these problem
Human activities affect animal habitats in various ways, including deforestation, pollution, hunting, climate change, land development, and the introduction of invasive species.
Deforestation destroys the natural habitat of animals, leading to their displacement, starvation, and ultimately extinction. Pollution from factories, vehicles, and chemical fertilizers contaminates water, air, and soil, poisoning animals and their food sources.
Hunting, especially for sport, decimates animal populations and disrupts the food chain. Climate change alters animal habitats, forcing them to migrate, adapt, or perish.
Land development, such as building roads and cities, encroaches on animal habitats, limiting their space and resources. The introduction of invasive species, intentionally or accidentally, disrupts the ecosystem and can cause the extinction of native species.
Solutions to these problems include reforestation, reducing pollution, implementing wildlife conservation laws and regulations, limiting hunting, adopting sustainable practices that reduce carbon footprint, conserving natural habitats, and preventing the introduction of invasive species.
It is important for humans to recognize the impact of their actions on the environment and make conscious efforts to protect and preserve animal habitats.
For more questions like Human click the link below:
https://brainly.com/question/20162833
#SPJ4
1. Pilihan ganda30 detik1 ptQ. Which North African ethnic group continues to maintain many of its nomadic and semi-nomadic cultural traditions?Pilihan jawabanEgyptiansLibyansMoroccansBerbers
The North African ethnic group that continues to maintain many of its nomadic and semi-nomadic cultural traditions is the Berbers.
The Berbers, also known as Amazigh people, are a North African ethnic group that have inhabited the region for thousands of years. They have a rich and complex history, with many different sub-groups, languages, and cultural practices. One of the defining features of Berber culture is their tradition of nomadism and semi-nomadism, which involves a lifestyle based on the seasonal movement of people, animals, and goods.
The Berbers have traditionally relied on pastoralism, the practice of raising and herding livestock, as a primary source of subsistence. This has led to the development of specialized skills and knowledge related to animal husbandry, as well as the use of different types of transportation, such as camels and donkeys, to move people and goods across vast distances. Many Berbers continue to maintain these cultural practices, even in the face of modernization and urbanization.
In addition to their pastoral traditions, the Berbers have also developed unique forms of art, music, and language that reflect their cultural heritage. Berber languages, which include Tamazight, Tashelhit, and Kabyle, are spoken by millions of people in North Africa and are recognized as official languages in some countries, such as Algeria and Morocco.
Despite their long history and cultural diversity, the Berbers have faced marginalization and discrimination in many parts of North Africa. In recent years, there has been a resurgence of Berber cultural pride and activism, with many people working to preserve and promote their language, traditions, and rights. Overall, the Berbers continue to play an important role in the cultural, social, and political landscape of North Africa.
To learn more about Berbers, click here:
https://brainly.com/question/28586461
#SPJ4
which material, when dry, tends to form the greatest angle of repose?
The angle of repose is the steepest angle at which a material can be stacked or piled without sagging or collapsing. The size, shape, and surface characteristics of the particles that make up the material affect the angle of repose.
Generally speaking, the largest angle of repose is formed by dry, granular materials with big, homogeneous, and smooth particles. This is because these atoms can interact with one another to form a sturdy, pyramidal structure. Dry sand, gravel, and cornmeal are a few examples of materials that frequently generate a high angle of repose. The substance that tends to generate the greatest angle of repose is therefore dry, granular, and composed of large, even, and smooth particles.
To know more about the material click on the link
https://brainly.com/question/11051048
#SPJ4
what type of bond results from the end‑on overlap of orbitals?
Answer:
sigma bond
Explanation:
Why do you think India's established trade route in Vietnam would be beneficial to China and india
Establishing a trade route in Vietnam would be a bilateral benefit for both India and China. It would help exchange goods between both countries and lead to the economic advancement of the countries involved. This could also result in increased economic cooperation which might even play a key role in strengthening the political bond between the two nations
A trade route in Vietnam would also reduce the price and time taken for trade between the two nations. This would make it easier and more affordable for companies in both countries to do business with one another and lead to a reduction in the selling price. It would result in increased aggregate demand, further cementing the economic conditions of both countries.
Moreover, a trade route in Vietnam would provide a direct and efficient way for the exchange of commodities and cultures of both nations, thus strengthening ties between the nations which would lead to economic and cultural progress for both countries.
for more information regarding the establishment of trade routes
https://brainly.com/question/17939430
[TRUE or FALSE] sand found in commercial sand and gravel deposits is typically composed of silicate minerals.
The statement "sand found in commercial sand and gravel deposits is typically composed of silicate minerals" is TRUE because the commercial sand is typically quartz sand which is composed almost entirely of silica.
Silicate minerals are the most common minerals in the Earth's crust, and they make up the majority of the minerals found in sand. The most common silicate mineral found in sand is quartz, which is a hard, durable mineral composed of silicon and oxygen.
Other silicate minerals that may be found in sand include feldspar, mica, and clay minerals. The specific mineral composition of sand can vary depending on the geographic location of the deposit and the geological processes that created it.
Silicate minerals have a wide range of physical and chemical properties, and they play important roles in many geological processes, including the formation of rocks, minerals, and soils.
Learn more about Silicate minerals here:
https://brainly.com/question/4938885
#SPJ4
A planets distant from the sun effects it’s what?
Answer:
The distance of a planet from the sun can affect its temperature.
Explanation:
Generally, the farther a planet is from the sun, the colder its temperature will be. This is because the sun's heat and light are spread out over a larger area as the distance from the sun increases. For example, the planet Mercury is close to the sun and has a very hot surface, while the planet Neptune is much farther from the sun and has a much colder surface.
Additionally, the distance of a planet from the sun can also affect its atmosphere, since the intensity of solar radiation reaching the planet decreases with increasing distance. This can have implications for the presence and stability of volatile compounds such as water and the habitability of the planet.
The process in which a denser plate is pushed beneath a less dense plate is called:_________
Subduction happens where tectonic plates crash into each other instead of spreading apart.At subduction zones,the edge of the denser plate subducts,or slides,beneath the less-dense one.
The denser lithospheric material then melts back into the Earth's mantleSubduction is a geological process in which the oceanic lithosphere and some continental lithosphere is recycled into the Earth's mantle at convergent boundaries.Subduction occurs when two plates collide at a convergent boundary, and one plate is driven beneath the other,back into the Earth's interior.Not all convergence leads to subduction.Continental rocks are too buoyant to be forced downward,so when continents collide, they crumple but stay at the surface.Convection is a mode of heat transfer by the actual motion of matter.Convection is a process in which hot,less dense materials rise upward and are replaced by colder,more dense materials.
To learn more about Subduction please click on below link.
https://brainly.com/question/5273762.
#SPJ4
subduction zones occur a what type of plate boundary?
Subduction zones occur at a convergent plate boundary. In a convergent boundary, two tectonic plates come together.
At a subduction zone, the denser plate, usually an oceanic plate, is forced beneath the less dense plate, usually a continental plate, creating a deep ocean trench. The oceanic plate begins to melt as it descends deeper into the Earth's mantle and the heat and pressure cause it to deform and slowly sink into the mantle.This sinking process creates a zone of intense geological activity, including earthquakes, volcanic eruptions, and the formation of mountain ranges. The Andes Mountain range in South America, for example, formed as a result of subduction of the oceanic Nazca Plate beneath the South American Plate.Subduction zones also play a crucial role in the Earth's carbon cycle, as the sinking oceanic plate carries large amounts of carbon-rich materials into the mantle, where they are eventually recycled back to the surface through volcanic eruptions.
learn more about subduction here:
https://brainly.com/question/30032689
#SPJ4
Which one of the following statements is NOT true about andesite and basalt? a) Basaltic lava is thicker than andesitic lava. b) Andesite has more silica than basalt. c) Cinder cones can be comprised of either andesitic or basaltic magma. d) Basalt has more iron and magnesium than andesite. e) Andesite and basalt are extrusive igneous rocks.
The correct answer is option A) Basaltic lava is thicker than andesitic lava.
Basaltic lava is often more fluid than andesitic lava, allowing it to flow more freely. Plagioclase and pyroxene minerals make up the majority of the minerals in basalt, an igneous rock that is black and fine-grained.
The majority of the time, it is created when the Earth's mantle partially melts. Andesite lacks basalt's iron and magnesium content. Extrusive igneous rock known as andesite may be found in both the continental and oceanic crust.
Plagioclase feldspar and pyroxene make up the majority of its composition, along with trace amounts of olivine and biotite.
Andesite has a greater viscosity and is less prone to flow because it contains more silica than basalt. Depending on the kind of magma that is erupted, cinder cones can be made from either andesitic or basaltic magma.
To learn more about Basaltic lava visit:
https://brainly.com/question/30613677
#SPJ4
What is another word for northern lights?
Answer:
Explanation:
aurora borealis
What is a levee?
What is a meander?
how do chemical and mechanical weathering work together to create sediment?
Answer:
Mechanical weathering creates surfaces for chemical weathering to take place
Explanation:
Chemical and mechanical weathering work together to create sediment, because they break down rocks, soils, and minerals through contact with the Earth's atmosphere, water, and biological organisms.
Chemical weathering involves the breakdown of rocks and minerals through chemical reactions. This can occur through the action of water, oxygen, carbon dioxide, and other substances. For example, when water reacts with minerals in rocks, it can dissolve them and create new compounds. This can weaken the rock and make it more susceptible to mechanical weathering.
Mechanical weathering, also known as physical weathering, involves the breakdown of rocks and minerals through physical processes such as freezing and thawing, abrasion, and impact. For example, when water freezes in the cracks of rocks, it expands and can cause the rock to break apart. This can create smaller pieces of rock, or sediment.
Together, chemical and mechanical weathering work to break down rocks and create sediment. This sediment can then be transported and deposited in new locations through processes such as erosion and deposition. This is an important part of the geologic cycle and helps to shape the Earth's surface and create new landforms.
Learn more about sediment: https://brainly.com/question/22443465?referrer=searchResults
#SPJ11
Compare and contrast on voluntary and forced migration
Voluntary and forced migration differ in terms of the decision-making, destination, and reasons for the move. Forced migration is often traumatic and difficult for individuals and their families.
Voluntary and forced migration are two distinct types of movement of people from one location to another. While voluntary migration involves individuals or groups making a choice to move, forced migration involves people being compelled to leave their homes and relocate to a different location due to various reasons. Here are some of the main differences and similarities between the two:
Reason for Migration: Voluntary migration is typically driven by individual or group choice and factors such as job opportunities, better living standards, education, or family reasons. On the other hand, forced migration is usually triggered by natural disasters, persecution, political instability, war, or conflict.Decision-making: In voluntary migration, individuals or groups make their own decision to move, and the process is often planned and well thought out. Forced migration, however, is usually involuntary, and the decision to leave is made for them by external forces.Destination: In voluntary migration, individuals or groups choose their destination, and they usually have some control over where they want to go. Forced migration, on the other hand, often involves being moved to a location chosen by external forces, such as government agencies or international organizations.Preparedness: Voluntary migration often involves careful planning, including financial preparation and knowledge of the destination country's culture and customs. In forced migration, individuals may not have the luxury of planning or preparing for the move, and may be forced to leave with little or no preparation.Emotional Impact: Both types of migration can have significant emotional impact on individuals and their families. However, forced migration is often traumatic, as it involves leaving behind homes, possessions, and loved ones, and can lead to feelings of displacement and loss of identity.For more such questions on migration
https://brainly.com/question/18259786
#SPJ4