Christy is a forensic scientist. She is given a white powder and asked to determine whether it’s sugar. She analyzes the white powder with a mass spectrometer in her lab. The test results reveal that the substance has a different molecular mass than sugar. What do these test results say about the initial hypothesis and what would be a reasonable next step for Christy’s investigation?
Answers
Answer:
A. is not
B. incorrect
C. identify substances that have the measured molecular mass
Explanation:
Since in the question it is mentioned that the Christy who is a forensic scientist and she gave a white powder and identify whether it is a sugar or not when she tested she seen that the molecular mass is different as compared with the sugar
So here it can be concluded that the white powder does not show a sugar that means it is not a sugar so automatically the hypothesis of Christy is wrong. And, the next step is to track the substance that shows the molecular mass i.e. measured
Answer:
- is not
-incorrect
- identify substances that have the measured molecular mass
Explanation:
Related Questions
6. Suppose you are going to measure the length of a pencil in centimeters.
What should you do to get the most accurate measurement? If you give
the ruler to three different friends, what should they do to achieve good precision?
Answers
Answer:
Their answers must be in two decimal places
All of them should view the scale from the front to avoid parallax error and the scale should be kept corresponding to the end of the pencil to accurately measure its length.
What is a parallax error?
Because your eye is angled toward the measuring marks, parallax error happens when the length of an object is measured as being longer or shorter than it actually is. For instance, someone looking at a car's speedometer from the driver's seat will see it clearly and receive an accurate reading.
Due to the angle formed by his eye, the speedometer, and the arrow, a person observing the speedometer from the passenger seat will overestimate the reading.
On a ruler or other similar instrument, position your line of sight such that it is immediately above the measurement marking, creating an imagined vertical line between your eye, the marking, and the item. The main reason for parallax error is when you see an item in relation to the scale from an angle that causes it to appear to be at a different location on the scale.
Therefore, they should view the scale from the front to avoid parallax error and the scale should be kept corresponding to the end of the pencil to accurately measure its length.
Read more about parallax error, here
https://brainly.com/question/17057769
#SPJ2
34 questions and 22 questions are right what is the percent error
Answers
Consider the function f(x) =
9-82
x² - 4
For which intervals is f(x) positive? Check all that apply.
(-0, -3)
(-3,-2)
(-2, 2)
0 (2, 3)
0 (0o, 3)
Answers
What is the volume of an object with a mass of 11.5 g and a density of 1.3 g/mL?
Answers
Answer:
The answer is
8.85 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass of object = 11.5 g
density = 1.3 g/mL
The volume is
[tex]volume = \frac{11.5}{1.3} \\ = 8.846153[/tex]
We have the final answer as
8.85 mLHope this helps you
How many liters are in 2.36 gallons?
Answers
Answer:8.933572
Explanation:
for an approximate result, multiply the volume value by 3.785
Answer:
8.934 liters
Hopefully this helped!
-✩sandwichchan✩
Uranium-238 had a half life of 4.5 billion years. A 100 g sample of U-238 has decayed until only 25 g remain. How long did it take for the sample to decay? (Write the answer in “n billion years”)
Answers
awnseris chemical hhhh Explanation:
which of the following represents ca chemical change. rocks being smoothed by rapid water movement iron attraction to a magenta the pink color of a rose decomposition of stone due to acid rain
Answers
Answer:
The answer is decomposition of stone during acid rain
Explanation:
The reason being is that decomposition is most likely a result of a chemical change.
How does I meter in France compare to I meter in America?
Answers
Answer: a meter is a meter
Explanation:
a meter is a certain lenght. it does not change when you're somehwere else
A meter is the SI unit for length. This means that it is an international standard unit which is the same in America and France.
What is the SI unit of measurement?The International System of Units (SI) is a French system. It is called French Système International d’Unités. It is an international decimal system of weights and measures. It has been derived from the metric system and extended it further.
It was adopted by the 11th General Conference on Weights and Measures (CGPM) in the year 1960, it is abbreviated as SI in all languages.
In the 19th and 20th centuries, rapid advances took place in the field of science. These developments resulted in the development of several overlapping systems of units of measurement. These were improvised by scientists to meet the practical needs of their disciplines.
The earlier international system that was developed for solving this issue was called the meter-kilogram-second (MKS) system. Then there was the CGPM system which added three new units in 1948. It used a unit of force, the newton.
It is defined as the force that can be given to a mass of one kilogram to provide it with an acceleration of one meter per second per second. Also a unit of energy, the joule was defined. It is the work done when the application of a newton on a point is displaced by one meter in the direction of the force.
There was also a unit of power, the watt. This is the power that gives to the energy of one joule. All of these three units were named after eminent scientists.
Therefore, a meter is the same in America as well as France.
Read more about the SI system, here
https://brainly.com/question/6277621
#SPJ2
What is the temperature of 1.485 moles of N₂ gas at a pressure of 1.072 atm and a volume of 20 L?
Answers
Answer:
178.67K
Explanation:
PV=nRT
T=PV/nR
= 1.072atm*20L/1.485mol*0.0821LatmK^-1
=178.67K
is it true or false that the basic particle from which all elements are made is a m olecule
Answers
Answer:
False
Explanation:
check out the explanation in the attached file
Study island help pleaseeee
Answers
Answer:
A or D should be the answer
Hope this helps :)
Which of the following is NOT a valid conversion factor?
a
1 dozen
12 cookies
b
60 seconds
1 minute
C
1 yard
3 feet
12 hours
1 days
Answers
Answer: 12 hours
1 days
Explanation:
Calculate the mass of a piece of metal if its volume is 2.3 cm’and density is .486 g/cm3.
<-- Round to 3 digits
and show correct
units
Answers
Answer:
1.12 g.
Explanation:
From the question given above, the following were obtained obtained:
Volume (V) of metal = 2.3 cm³
Density (D) of metal = 0.486 g/cm³
Mass (m) of metal =..?
The density of a material is simply defined as the mass of the material per unit volume of the material. Mathematically, it is expressed as:
Density (D) = mass (m) / volume (V)
D = m/V
With the above formula, we can easily calculate the mass of the metal as shown below:
Volume (V) of metal = 2.3 cm³
Density (D) of metal = 0.486 g/cm³
Mass (m) of metal =..?
D = m/V
0.486 = m/2.3
Cross multiply
m = 0.486 × 2.3
m = 1.12 g
Therefore, the mass of the metal is 1.12 g.
1.014)
are simple and often expressed as mathematical equations.
A. Hypotheses
C. Theories
B. Laws
D. Procedures
Answers
Study this graph showing attendance at a swimming
pool throughout the year.
The trend of this data from January to December, can
best be described as
Visitors at Public Pool
1,500
1.200-
000-
Number of Visitors
600-
300-
0-1
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
Answers
Answer: Nonlinear
It's the right answer, I got it right so I'm 99.99% it'll be for yours too.
Answer:
Nov. ✔ = Feb.
Oct. ✔ < Dec.
Jan. ✔ > Nov.
Explanation:
This IS the right answer!☺️
Select the correct image. Which element is a noble gas?
Answers
Answer:
He (Helium)
Explanation:
According to the Periodic Table, our noble gases are:
Helium - Element 2
Neon - Element 10
Argon - Element 18
Krypton - Element 46
Xenon - Element 54
Radon - Element 86
the precautions that must be taken when carrying out experiments with hydrogen
Answers
Answer:
Never smoke near a place where hydrogen is generated or being used. Remove all possible sources of flame and sparks. Hydrogen should only be generated and used in a well ventilated out door area. Precautions must be taken to remove all possibilities of fire or explosion.
2) What is the effect of time of day on temperature? The dependent variable
would be: *
The day the temperature was taken
Time of day the measurements were taken
Time in between the measurements
Temperature change
Answers
Answer:
Are we talking about body temperature or atmospheric temperature?
Which of the following describes the correct order for using the scientific
method?
A. A scientist should collect data, then state the question.
B. A scientist should form a hypothesis, then conduct an experiment.
C. A scientist should conduct an experiment, then state the question.
D. A scientist should draw conclusions, then form a hypothesis.
SERMIT
Answers
what is the electron configuration of an electrically neutral alkaline earth metal? please explain
Answers
Answer:
The elements in Group 2 (beryllium, magnesium, calcium, strontium, barium, and radium) are called the alkaline earth metals (see Figure below). These elements have two valence electrons, both of which reside in the outermost s sublevel. The general electron configuration of all alkaline earth metals is ns
A form of matter with an indefinite shape but a definite volume. It will take the shape of its container, but it will keep its own volume
Liquid
Intensive Property
Extensive Property
Solid Gas
Answers
The cows in a rancher's herd of cattle have been selectively bred to
produce milk. Which of the following will cause the next generation of
cows to receive the trait for producing large quantities of milk?
a. nutrients in the cows' food
b. essential minerals in the cows' water
c. electrical impulses in the cows' brains
d. information in the cows' chromosomes
Answers
Answer:
Information in the cows chromosomes answer d
Explanation:
calculate the number of atoms of sodium in a 4.5-gram sample
Answers
Answer:
1.18×10²³ atoms.
Explanation:
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ atoms.
From the above concept, 1 mole of sodium also contains 6.02×10²³ atoms.
1 mole of sodium = 23 g.
Thus,
23 g of sodium contains 6.02×10²³ atoms.
Therefore, 4.5 g of sodium will contain = (4.5 × 6.02×10²³)/23 = 1.18×10²³ atoms.
From the above calculation,
4.5 g of sodium contains 1.18×10²³ atoms.
An increase in pressure increasing the boiling point of a liquid is an example of a- physical property b-chemical property c-physical change d- chemical changcgre
Answers
Answer:
Ans. C. physical change
Explanation:
Physical: boiling and melting are physical changes. When water boils no bonds are broken or formed.
Which statement about gases is true?
They are made up of particles that always move very slowly.
They are made up of particles that travel in a curved path when in motion.
They are made up of hard spheres that vibrate quickly in stationary positions.
They are made up of hard spheres that are in random motion.
Answers
Answer:
they are made up of hard spheres that are in random motion
Answer:
D) They are made up of hard spheres that are in random motion.
Explanation:
A physical property can be _________. A. altered with a physical change. B. used to change the identity of a substance. C. observed using the 5 senses. D. a chemical property as well.
Answers
Answer:
It is C. observed using the 5 senses.
Explanation:
you can observe a substance without changing its identity.
A physical property can be a chemical property as well.
A physical property refers to a characteristic or behavior of a substance that can be observed or measured without changing the substance's chemical composition. Physical properties include characteristics such as color, density, melting point, boiling point, solubility, conductivity, and so on.
Option A, "altered with a physical change," is true for physical properties. Physical changes, such as changes in state (solid to liquid to gas), changes in shape, or changes in phase, can alter certain physical properties of a substance without changing its chemical composition.
Option B, "used to change the identity of a substance," is not accurate for physical properties. Physical properties alone do not change the identity or chemical composition of a substance.
Option C, "observed using the 5 senses," is partially true. Some physical properties, such as color, odor, and texture, can be observed directly using the senses. However, many physical properties require specific measurement techniques or instruments to be accurately determined.
Option D, "a chemical property as well," is true. Some physical properties can also provide information about the chemical behavior or reactivity of a substance. For example, flammability, reactivity with acids or bases, or oxidation resistance are both physical and chemical properties, as they involve the behavior of a substance during a chemical reaction or interaction.
Therefore, the correct answer is D. a chemical property as well.
Learn more about physical property from the link given below.
https://brainly.com/question/24632287
#SPJ2
Calculate the density of a material that has a mass of 52.457 g and a volume of 13.5 cm^3. The formula is D=m/v
Answers
Answer:
The answer is
3.89 g/cm³Explanation:
The Density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} [/tex]
From the question
mass = 52.457 g
volume = 13.5 cm³
The density is
[tex]density = \frac{52.457}{13.5} \\ = 3.885703...[/tex]
We have the final answer as
3.89 g/cm³Hope this helps you
Find the density of a liquid with a volume of 3.8 mL and a mass of 3.75 g
Answers
Answer:
The answer is
0.99 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} [/tex]From the question
mass of liquid = 3.75 g
volume = 3.8 mL
Substitute the values into the above formula and solve for the density
The density is
[tex]density = \frac{3.75}{3.8} \\ = 0.98684210...[/tex]
We have the final answer as
0.99 g/mLHope this helps you
What two-step process separated the cans into aluminum, steel, and tin?
Answers
Answer:
Magnet
Durability and heaviness.(texture)
Explanation:
Magnet can be use to separate Aluminum from mixture of steel and aluminum.
Though aluminum and steel look alike but magnet can be use to separate it.
If the can attract the magnet or magnet stick to the can, it is a steel can. Aluminum does not stick to magnet.
A mixture of Aluminum and tin can also be separated by magnet.
Tin attract magnet but tin is more durable, heavy and does not corrode easily.
When u touch the three cans, tin is heavy and durable.
A scientist discovers a deep bowl-like divot under the ocean off the coast of eastern Mexico that is many kilometers across. The layers of the ground all around the continent from around the time that structure formed contain large amounts of iridium and a larger number of fossils than is normally found. What most likely caused the bowl-like structure?
a meteorite impact
an asteroid impact
an iridium spike
a Kuiper object impact
Answers
Answer:
an asteroid impact or B
Explanation:
An asteroid impact most likely caused the bowl-like structure. Hence, option B is correct.
What is divot or bowl like structure?A divot are the marks made in the grass on the golf course. So, scientist named a bowl like structure form in under the ocean off the coast of eastern Mexico.
An impact event is a collision between astronomical objects causing measure effect.If the asteroid hits on land of the earth there will be the huge amount of dust thrown up into the atmosphere.If it hits water, then there would be an increase in water in the atmosphere.Example: the impact of asteroid ended the age of dinosaurs a 66 million years ago.
It kills more than 75 percent of earth species.The asteroid impact in ocean made bowl type structure called divot these kilometers in size so big as compared to a football ground.
An asteroid impact most likely caused the bowl-like structure. Hence, option B is correct.
Learn more about asteroid impact. here:
https://brainly.com/question/24233378
#SPJ6
