claim b: more potential energy can be stored by moving against the magnetic force closer to a magnet. which variable will you test and which variable(s) will you keep the same? how will you measure the effect of each variable?

The goose weighs 21.3 pounds and travels at an average speed of 8 miles per hour (miles per hour). The goose's kinetic energy in joules is 61.86 kg m2/sec2.

Given,

Kinetic energy (K.E)=1/2mv²

where m=mass in kg,velocity =v m/sec

From data m=21.3lb

but 21.3lb =454g;  1000g=1kg

21.3lb×454g/1lb×(kg/1000g)=9.6702 kg

velocity=8.00 miles/h

1mile=1.61km; 1hour=60min =60×60 sec

8.00miles/hour ×(1 hour/60×60sec)×(1.61 km/1mile)×1000m/1km

v=3.577 m/sec

Kinetic energy (K.E)=1/2mv²

                               =1/2(9.67)(3.577 m/sec)²

                               =61.86 kg m²/sec²

∴KE=61.86 Joule

kinetic energy of the goose=61.86J

Kinetic energy is the type of energy that an object or particle possesses as a result of its motion. When work is performed on an object by applying a net force, the object accelerates and gains kinetic energy. Kinetic energy is a property of a moving object or particle that is affected by both its motion and mass. Translation (or movement along a path from one location to another), rotation about an axis, vibration, or any combination of motions are all possible.

Learn more about Kinetic energy here:

https://brainly.com/question/999862

#SPJ4

The number of the square tiles that would be needed to tile the entire room is 2,800 tiles.

The area of the room is calculated by applying the following formula as shown below.

Mathematically, the formula for area of a rectangular room is given as;

A = L x B

where;

Area = 350 m x 200 m

Area = 70,000 m²

The area of the square tiles is calculated as follows;

A = L x L

where;

A = 5 m x 5 m

A = 25 m²

The number of the square tiles that would be needed to tile the entire room is calculated as follows;

n = area of the entire room / area of each square tile

n = ( 70,000 m² ) / ( 25 m² )

n = 2,800

Learn more about area of square here: https://brainly.com/question/813881

#SPJ1

After the water is ejected, the squid's final speed is 3 m/s in the opposite direction.

The dislocation that such an object a particle experiences in respect to time is expressed vectorially as pace. The meter a second (m/s) is the accepted unit measure velocity profile (also known as speed). The unidirectional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

mass m₁ = 1.5 kg

initial velocity, u₁ = 0

mass of water, m₂ = 0.1 kg

initial velocity , u₂ = 0

final velocity , v₂ = 45 m/s

conservation of linear momentum;

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

1.5(0) + 0.1(0) = 1.5v₁ + 45(0.1)

0 = 1.5v₁ + 4.5

1.5v₁ = -4.5

v1 = (-4.5)/1.5

v1 = -3 m/s

To know more about velocity visit:

https://brainly.com/question/28738284

#SPJ4

The second block weighs one kilogram.

A mass measurement reveals how much matter is there in an object.

Usually, the metric systems of grams, kilograms, and tonnes are used to compute it.

As we know that F = ma.

Considering that the force applied to the first block and the second block are equal.

The acceleration of the first block is 0.2 m/s^2 and the acceleration of the second block is 0.1 m/s^2, we can set up the following equation:

F = ma

where F is the force exerted on both blocks, m1 is the mass of the first block (0.5 kg), a1 is the acceleration of the first block (0.2 m/s^2), m2 is the mass of the second block, and a2 is the acceleration of the second block (0.1 m/s^2).

So substituting,

F = m1 * a1 = m2 * a2

Rearranging for m2

m2 = F / a2

m2 = (F / 0.1 m/s^2)

m2 = (F/0.1) = m1 * (a1/a2)

m2 = (0.5kg * (0.2/0.1)) = 1kg

So, the mass of the second block is 1 kg.

To know more about mass, visit:

brainly.com/question/19694949

#SPJ4

5.6 * 10⁻⁷N gravitational force will exert on both lead balls.

Given information:

mass of 1st ball(m₁) = 12kg

mass of 2nd ball (m₂) = 70g

distance between both balls (r)= 14cm

To find gravitational force

 F = Gm₁m₂/r²

    = 5.6 N

The force of attraction between any two bodies is directly proportional to the product of their millions and is equally proportional to the forecourt of the distance between them.

Learn more about gravitational force visit:

brainly.com/question/12528243

#SPJ4

The acceleration of block m1 is (ma-ma-mulo/im.mpma).

Acceleration is the rate at which an object's velocity with respect to time changes. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration.

The acceleration of block m1 (ma) can be determined by analyzing the net force acting on it, which is equal to the tension in the string connected to it, minus the weight of the block.

Tension in the string connected to m1 is equal to the tension in the string connected to m3, since the two strings are light and inelastic. Therefore, the net force acting on m1 is equal to T - m1g, where T is the tension in the string and g is the acceleration due to gravity.

The tension in the string is equal to the acceleration of m3, since

T = m3a. Therefore, the net force acting on m1 is equal to m3a - m1g.

m1 is connected to m2 and m3, so the acceleration of m1 is dependent on the masses of m1, m2 and m3.

Therefore, the acceleration of block m1 is (m3-m1-m2)/(m1+m2+m3) which corresponds to option D) (ma-ma-mulo/im.mpma).

To know more about acceleration, visit:

brainly.com/question/12550364

#SPJ4

(a) We can find the kinetic energy of the sprinter by:

KE = 1/2 * 65.0 kg * (10.0 m/s)^2 = 3250 J

Then, we can use this same equation to find the speed of the elephant, but with its mass (3000 kg):

KE = 1/2 * 3000 kg * v^2 = 3250 J

Solving for v, we get: v = sqrt(3250 J / (1/2 * 3000 kg))

And the speed of the elephant would be around 4.19 m/s.

(b) In order for a larger animal to move, it requires more energy than a smaller animal because larger animals have more mass, and as a result, more energy is needed to accelerate and maintain their motion. This increased energy demand is met by an increase in the animal's metabolic rate.

In strength, elephants are the strongest mammals and the strongest land animals. African elephants can weigh up to 6,350kg and they can carry up to 9,000kg, the weight of 130 adult humans.

Kinetic energy is a form of energy that an object or a particle has due to its motion. If work is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.

To know more about kinetic energy, visit here:

https://brainly.com/question/26472013

#SPJ4

The volume of the material is 27.14 m³ and the density of the material is 1.02 kg/m³.

The sample of the unknown material as a weight of 290 Newton in the air and when it is must in alcohol of specific gravity 0.70 it has a weight of 190 Newton.

We know,

B = VpG

B is buoyancy that will be 190N,

V is volume of material,

p is the density of alcohol,

G is the acceleration due to gravity,

Putting values,

190 = V(0.7)(10)

V = 27.14 m³

The volume of the material is 27.14 m³.

Now, we know,

Density = Mass/volume

Density = W/Vg

Putting values,

Density = 290/27.14×10

Density = 1.02 kg/m³.

So, the density of material is 1.02 kg/m³.

To know more about Density, visit,

https://brainly.com/question/1354972

#SPJ4

If the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle, then he will use the string half as the length of the original string.

A student is twirling a rubber stopper in a vertical circle of radius 0.95 m. If the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle. A physics student is performing a lab in which she twirls a rubber stopper at the end of a string around in a circle at nearly constant speed and tries to determine its acceleration. by the given primary information we can firmly conclude that if the rubber stopper has a mass of 50 grams and the student is able to control the speed so that it is a constant 3.5 m/s at all points on the circle, then he will use the string half as the length of the original string.

Learn more about Speed:

brainly.com/question/28224010

#SPJ4

This will create a system of three equal-sized point charges, and since the forces between point charges are equal and opposite, the forces on the third charge will cancel each other out and there will be no net force.

What is the charge ?

The charge is the amount of money that a person is asked to pay in exchange for goods or services. Charges can be in the form of a fixed price, a fee based on time spent or a percentage of the total cost. Charges may also be based on the complexity or difficulty of the job. Payment can be in the form of cash, check or credit card. Charges are typically due at the time of service, unless other arrangements have been made in advance.

To learn more about charge

https://brainly.com/question/25923373

#SPJ4

Rutherford's idea that electrons radiate energy while orbiting around a nucleus would have strengthened the idea of quantum mechanics, which explains the behavior of particles at the subatomic level.

what is mechanics ?

Mechanics is a branch of science that studies the behavior of physical objects, their interactions, and the forces that act on them. It is sometimes referred to as the fundamental science, as it provides the underlying principles of many other sciences, such as engineering, aeronautical science, and medicine.

Mechanics is divided into two main branches: classical mechanics and quantum mechanics. Classical mechanics studies the motion of macroscopic objects, such as automobiles and aircraft, and is a cornerstone of engineering and the physical sciences. Quantum mechanics is the study of the behavior of microscopic objects, such as atoms and molecules, and is a cornerstone of modern chemistry and physics.

To learn about more mechanics.

https://brainly.com/question/23561157

#SPJ4

The data are consistent with the law of multiple proportions, as the ratios of element A to element B in each compound can be reduced to small whole numbers.

The law of multiple proportions states that when two elements combine to form two or more compounds, the masses of one element that combine with a fixed mass of the other element are in a ratio of small whole numbers.  For compound 1, the mass of element A is 46.7 mass%, and the mass of element B is 53.3 mass%. For compound 2, the mass of element A is 30.4 mass%, and the mass of element B is 69.6 mass%.  

The ratio of element A in compound 1 to element A in compound 2 is 46.7/30.4 = 1.54.  The ratio of element B in compound 1 to element B in compound 2 is 53.3/69.6 = 0.764.  The ratio of element A in compound 1 to element B in compound 1 is 46.7/53.3 = 0.875.  The ratio of element A in compound 2 to element B in compound 2 is 30.4/69.6 = 0.436.  These ratios can be simplified to 3:2:2:1, which are small whole numbers and therefore consistent with the law of multiple proportions.  

To know more about  multiple proportions refer to the link brainly.com/question/13058110

#SPJ4

The value of resistivity and conductivity are mentioned below.

What is resistivity ?

A conductor with a unit cross-sectional area and unit length and its electrical resistance. Resistivity, a distinctive quality of any material, is helpful in comparing different materials based on their capacity to conduct electric currents. Poor conductors are identified by high resistance.

What is conductivity ?

A substance or material that permits electricity to flow through it is referred to as an electrical conductor. When voltage is given to a conductor, electrical charge carriers, often electrons or ions, travel easily from atom to atom.

Part a is explained by using the concept of diffusion current density and Einstein's relation

from semiconductor we have

T mobility

V= μE

Drift velocity

I = ncAvl

J also equal to E

σE= nevd

σ= nevd/E

σ= neμ

resistivity is reciprocal of conductivity

S= 1/σ=1/neμ

from Einstein's equation

∫= KT/ ne²Dn

Therefore, value of resistivity and conductivity are mentioned below.

Learn more about resistivity from the given link.

https://brainly.com/question/13735984

#SPJ4

The 27.9 kg mass experience a net force of zero. Gravitational equilibrium occurs when the gravitational force on an object is equal to zero.

Tilting an object will increase the height of its center of gravity when it is in a stable balance. When tilted, an item in unstable equilibrium will have a lower center of gravity. Finally, for objects in neutral equilibrium, the center of gravity will stay at the same height when pushed.

To find the distance at which the 27.9 kg mass experiences a net force of zero, we need to calculate the gravitational force acting on it due to the other two masses. The gravitational force between two masses m1 and m2 at distance r is given by F = Gm1m2/r^2, where G is the gravitational constant.

First, we know that the distance between the 99 kg and 404 kg masses is fixed. Let's call this distance d.

Now we can set the gravitational force acting on the 27.9 kg mass due to the 99 kg mass and the 404 kg mass equal to zero and solve for r:

0 = G*(27.9 kg)(99 kg)/r^2 + G(27.9 kg)*(404 kg)/(d-r)^2

Solving for r, we get:

r = d * sqrt(404/(404+99))

Substituting d value will give the distance at which the 27.9 kg mass experiences a net force of zero in units of m.

To know more about gravitational force visit:

brainly.com/question/3009841

#SPJ4

Assuming the bungee cord is perfectly elastic, the jumper will reach a minimum distance of 14.7 meters from the ground after the cord has stretched.

What is distance?

Distance is the amount of space between two objects or points. It is typically measured in units such as meters, feet, or miles. Distance can also be measured in a more abstract sense, such as the amount of time it takes for something to happen or the amount of effort required to complete a task.

Distance can also refer to the difference between two things, such as the difference between two people’s opinions on a particular topic. Distance can also refer to physical separation, such as the distance between two people who are in different countries or cities. Distance can also be used to express the size of something, such as how far a car can travel on a single tank of gas.

Given: m = mass of jumper = 60kg

            h = height of cliff = 40m

Also,

k = F/x = 40N/1m = 40N/m

Now, when jumper jumps,

F = m×g

= 60×9.8

= 588 N

Therefore,

x = (588N)/(40N/m) = 14.7m

Thus, jumper gets to a close of 14.7 meters to the ground.

To learn more about distance

https://brainly.com/question/4931057

#SPJ4

Given that T=ma and a= v^2/r, we can solve for the velocity, v = √(Tr/m)

To solve this problem, we need to use the concept of centripetal force, which is the force that keeps an object moving in a circular path. The centripetal force is given by the equation:

F = m * a

where F is the centripetal force, m is the mass of the object and a is the centripetal acceleration.

The centripetal acceleration is given by the equation:

a = v^2 / r

where v is the velocity of the object and r is the radius of the circular path.

The radius of the circular path in this case is the length of the string (12cm). The angle of 35° is not needed for solving the problem.

Now we can substitute the value of a into the equation for the centripetal force:

F = m * (v^2 / r)

We know the force is the tension of the string, T, and the mass of the object, m. So we can write

T = m * (v^2 / r)

Given that T=ma and a= v^2/r, we can solve for the velocity, v = √(Tr/m)

Without knowing the mass of the object and the tension of the string we can't find the velocity of the spinning ball.

Learn more about centripetal force in brainly.com/question/11324711

#SPJ1

According to Newton's third rule of motion, whenever a first object applies a force to a second object, the first object feels a force that is both equal to and opposite from the force that it applies.

What is Force?

In physics, a force is an influence that can change the motion of an object. A force can cause a mass object's velocity or acceleration to change. Force can be described intuitively as a push or a pull. Because it has both magnitude and direction, a force is a vector quantity.

To find the work done by friction over the full length of the roller coaster, you will need to calculate the force of friction acting on the marble over the entire track. The force of friction can be calculated using the formula: F = μ * N, where μ is the coefficient of kinetic friction and N is the normal force. Once you have calculated the force of friction, you can then calculate the work done by multiplying the force of friction by the distance travelled. The formula for work is W = F * d, where F is the force of friction and d is the distance travelled.

To Learn more About the force Refer To:

brainly.com/question/12785175

#SPJ1

Answer:

a

Explanation:

The acceleration of the cannon ball horizontally is 0 m/s2, since it is already traveling at a constant velocity.

The position vector is 2.76i+3.05j, the magnitude of the torque is 20.0055 N*m, and the direction of the torque is perpendicular to the plane.

A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force.

a. The position vector for the point where the force is applied is given by the coordinates of the point in the xy-plane. In this case, the point is at (2.76 m, 3.05 m), so the position vector is:

r = 2.76i + 3.05j

b. The torque with respect to the origin produced by F is given by the cross product of the position vector and the force vector. The magnitude of the torque is given by the formula:

τ = r x F

τ = (2.76i + 3.05j) x (7.25i - 3.03j)

τ = ((3.05)(-3.03) - (2.76)(7.25))i + ((2.76)(-3.03) - (3.05)(7.25))j

τ =20.0055 N*m

c. The direction of the torque with respect to the origin is given by the cross product of the position vector and the force vector, the direction is perpendicular to the plane formed by the position vector and the force vector. The direction of the torque is out of the plane in a direction perpendicular to the plane.

To know more about force, visit:

brainly.com/question/13191643

#SPJ4

Answer: A

Explanation: This is a condition that makes it hard for the body to obsorve oxygen.

Answer:

it's A

Explanation:

i just did the same thing

In Newton's second law, f = ma, the mass m is a gravitational mass is a true statement.

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. In equation form this can be written as F = ma,

where,

F is the net force applied

m is the mass of the object

a is the acceleration of the object

This law explains that the larger the force applied, the greater the acceleration of the object.

Also, the larger the mass of the object, the lower the acceleration when the same force is applied to the object.

To know more about Newton's second law:

https://brainly.com/question/30197101

#SPJ4

The force on the firefly is greater than the force on the bus.

The concept of action-reaction pair is described by Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. In this scenario, the force of the firefly striking the bus is the action and the force of the bus striking the firefly is the reaction.

However, the force on the firefly is greater than the force on the bus. This is because the firefly is much smaller and less massive than the bus, so the force required to stop the firefly is much greater than the force required to stop the bus. Additionally, the firefly's impact on the bus would be negligible, while the bus' impact on the firefly would be fatal.

The forces acting on two objects in an action-reaction pair are equal in magnitude but opposite in direction, but the effect of these forces on the objects can be different based on the mass and velocity of the objects.

To know more about Newton's third law  click below:

https://brainly.com/question/29768600#

#SPJ4

The work done by this force is 20 J.

Initial velocity Vi =  3m/s

final velocity Vf^2=  Vi^2 +2as =  3^2 +2(2)(5) =29

Vf = 5.3m/s

Now we'll find the kinetic energy which is equal to the work done

K.E = m(Vf-Vi)^2/2

K.E = 2×(5.3-3)^2/2

K.E = 20 J

So the work done by this force is 20 J.

If you need to learn more about work done, click here

https://brainly.com/question/29989410?referrer=searchResults

#SPJ4

The graph of y=3e^(-t/4) is shown below: Position (y) on the vertical axis and time (t) on the horizontal axis.

The horizontal axis is a reference line on a graph that runs horizontally (left to right) and is used to plot data points. It is also known as the x-axis, and it typically represents the independent variables of a graph. The horizontal axis is used to visually display quantitative values, such as time, distance, or cost. When graphing a mathematical equation, the horizontal axis typically shows the real numbers that are being used in the equation.

The graph starts at y=3 when t=0 and then decreases in a curved line as time increases. This is because the exponent term is negative, so the entire function is decreasing as time increases. Specifically, the graph follows the shape of the exponential decay function e^(-t/4). As time increases, the value of y decreases exponentially, approaching 0 as t approaches infinity.
The formula for the graph is y = 3e^(-t/4)

To learn more about horizontal axis

https://brainly.com/question/2285228

#SPJ4

G is the gravitational constant, M is the mass of the gravitating body, and r is the separation between their centers.

To learn more about gravitational potential energy refer to:

https://brainly.com/question/3120930

#SPJ1

At point O, the little block in the previous diagram was set free from its state of rest and allowed to slide along the track with minimal friction.

How might a pupil interpret the graph to calculate the system's overall energy Use 12 mv2f where m=2 kg and vf=the object's final velocity as determined from the graph. An object of mass m can travel in any dimension in the xy plane without encountering any resistance when it is initially at rest.

Potential energy is transformed into kinetic energy by swings,then repeatedly changing from potential energy to kinetic energy. The fast component of swinging is called kinetic energy, and it is the speed at which you run back and forth. The most powerful aspect of swinging is potential energy.

To know more about friction visit :

https://brainly.com/question/13000653

#SPJ4

Answer:

Explanation:

1.)  V = V₀ + at

52.6 m/s = 0 + (9.8 m/s²)t

t = (52.6 m/s)/(9.8 m/s²) = 5.37 s

2.) a = ΔV/Δt = (50 m/s - 200 m/s) / 5 s = -30 m/s²

3.)  V = V₀ + at

V = 0 + (30 m/s²)(5 s) = 150 m/s

This assumes he starts from rest. Also, no human can run 150 m/s.  Are you sure the given a is 30 m/s²? You may want to double check.

P is power, V is voltage, I is current, and θ is the phase angle between the current and voltage. In this case, the voltage across the load is 60V, the current is 4.8A, and the phase angle is 30 degrees.

Z= 60+j80

Z = R+ jx

So X = 80

Current I = 4.8 A

Reactive power =(i)2 X

= 4.8x4.8x80= 1843 vars absorbed by load.

The three independent wires required for a three-phase connection, on the other hand, are used to transmit electricity. The voltage of a single-phase power supply system can go as high as 230 Volts. However, it can transmit a voltage of up to 415 Volts on a three-phase connection.

to know more about power here:

brainly.com/question/28875498

#SPJ4

The range of possible speeds (in km/h)  at the given uncertainty is 23 km/h to 27 km/h.

Uncertainty is defined as  the range of possible values within which the true value of the measurement lies.

The range of possible speeds (in km/h) when it reads 25 km/h is calculated as follows;

the uncertainty of the speed = ± 8%

The lowest speed reading = ( 100% - 8%) x 25 km/h

                                        = ( 92 % ) x 25 km/h

                                         = 0.92 x 25 km/h = 23 km/h

The highest speed reading = ( 100% + 8%) x 25 km/h

                                        = ( 108 % ) x 25 km/h

                                         = 1.08 x 25 km/h = 27 km/h

Learn more about uncertainty here: https://brainly.com/question/1970053

#SPJ1

Answer:

The final velocity of the car can be calculated using the equation:

v = u + at

where:

v = final velocity

u = initial velocity (since the car starts from a full stop, the initial velocity is 0)

a = acceleration (0.12 m/s^2)

t = time (unknown, but can be calculated using the distance and velocity)

To find the time, we can use the distance and velocity formula:

d = ut + (1/2)at^2

75 = 0 + (1/2)(0.12)(t^2)

t = sqrt(75/(1/2)(0.12))

t = sqrt(625/0.06)

t = sqrt(10416.67)

t = 102.41 seconds

Now we can substitute the values for u, a and t into the first equation to find the final velocity:

v = u + at

v = 0 + (0.12)(102.41)

v = 12.29 m/s

The magnitude of the final velocity of the car is 12.29 m/s.