Classify the following unbalanced chemical reaction Fe(OH)2(s) + HCl(aq) = FeCl2(aq) + H2O(l)
1. Acid-Base Reaction
2. Precipitation Reaction
3. Oxidation-Reduction Reaction
4. Combustion Reaction

Answer:

HBr + H2O = H3O+ + Br-

So our conjugate acid is the H3O+ to H2O

Explanation:

A conjugate acid of a base results when the base accepts a proton.

Consider ammonia reacting with water to form an equilibrium with ammonium ions and hydroxide ions:

NH3 (aq) + H2O (l) ⇌ NH4+ (aq) + OH- (aq)

Ammonium, NH4+, acts as a conjugate acid to ammonia, NH3.

Answer:

0.912 L or 912 mL

Explanation:

 M(KClO3) =  122.55 g/mol

3.00 g KClO3 * 1  mol/122.55 g = 3.00/122.55 mol =0.02449 mol                

                           2KCIO3(s)=2KCI(s) + 3O2(g)

from reaction      2 mol                         3 mol

given                   0.02449 mol              x

x = 0.02449*3/2 =0.03673 mol O2

T = 24 + 273.15 = 297.15 K

PV = nRT

V= nRT/P = (0.03673 mol*0.082057 L*atm/K*mol*297.15 K)/0.982 atm =

= 0.912 L or 912 mL

Answer:

(1R,3R)-1-ethyl-3-methylcyclohexane.

Explanation:

NOTE: The question is not complete since we do not have the diagram to the chemical structure in the question. Kindly check the attached picture for the diagram of the chemical structure.

So, in order to name Enantiomers or chemical structure through the use of the R,S system requires series of rules and regulations to follow for the proper naming.

There is an ethyl attached to the compound as the first substituents and methyl at the third which are the secondary prefix.

=> The longest chain is 6, thus the compound has hexane as the root compound.

=> It is (1R,3R) because when we draw from the highest substituents to the lower substituents, this is done in a clockwise direction.

Answer:

The wolf gets energy from other Animals through Cellular respiration. it's a carnivore

The rabbit gets energy from Carbohydrates,Fats.... obtained through different sources. A common example is the grass. It's an herbivore

The plant gets energy from the sun during photosynthesis. It's Autotrophic.

The mushroom gets energy from the decomposition of other organic matter. It's heterotrophic.

Explanation:

In a food chain; The Wolf eats the rabbit, when the Wolf dies, decomposers such as mushrooms breaks down its body returning it to the soil, where it provides nutrients for plants

Answer:

A. 0.75 moles NO2 are required

B. 82.2 gnof HNO3 are produced

C. 205.3 g of HNO3 are produced

Explanation:

Check attachment below for explanation and calculations

Answer:

Option C

The specific heat is the heat capacity for one mole of a substance.

Explanation:

The incorrect statement is  The specific heat is the heat capacity for one mole of a substance.

This is because the specific heat capacity is the amount of heat required to raise the temperature of 1 gramme of a substance by 1 degree Celcius.

Note that the unit in question here for the specific heat capacity of the substance is in grammes.

The definition given in the options is actually for the molar heat capacity of the substance, not the specific heat capacity.

Answer:

Explanation:

The equation for the react between Acetic acid and ethanol  to form ethyl acetate and water is :

[tex]HCH_3CO_2_{(aq)}+C_2H_5OH_{(aq)} \to C_2H_5CO_2CH_3_{(aq)} + H_2O_{(l)}[/tex]

Imagine if 94.0 mmol of [tex]C_2H_5CO_2CH_3[/tex] are removed from a flask; Then:

We are to answer the following questions:

1. What is the rate of the reverse reaction before any [tex]C_2H_5CO_2CH_3[/tex]  has been removed from the flask?

The reaction above is called an esterification reaction;

So the rate of reverse reaction before any [tex]C_2H_5CO_2CH_3[/tex]  is removed is  greater than zero and equal to forward reaction rate.

2. What is the rate of the reverse reaction just after the [tex]C_2H_5CO_2CH_3[/tex]  has been removed from the flask?

Just after the [tex]C_2H_5CO_2CH_3[/tex]  has been removed from the flask, the rate of the reverse reaction is  greater than zero but less than forward reaction rate.

3. What is the rate of the reverse reaction when the system has again achieved equilibrium?

When the system has again achieved equilibrium, the rate of the reverse reaction is greater than zero and equal to forward reaction rate because we it has achieved the equilibrium, hence, the reaction tends to proceed in the forward direction.

4. How much less [tex]C_2H_5CO_2CH_3[/tex]  is in the flask when the system has again reached equilibrium?

The [tex]C_2H_5CO_2CH_3[/tex] in the flask when the system has again reached equilibrium is lesser by 94.0 mmol as given right from the question

Answer:

u

uric acid is a useful diagnostic tool as screening for most of purine metabolic disorders. The importance of uric acid measurement in plasma and urine with respect of metabolic disorders is highlighted. Not only gout and renal stones are indications to send blood to the laboratory for uric acid examination

Answer:

6.07 L

Explanation:

It appears that the reading has been made at constant pressure .

At constant pressure , the gas law formula is

V/T = constant  V is volume and T is temperature of the gas.

V₁ / T₁ = V₂ / T₂

V₁ = 6.6 L ,

T₁ = 40°C

= 273 + 40

= 313 K

T₂ = 15+ 273

= 288K

V₂ = ?

Putting the values in the formula above

6.6 / 313  = V₂ / 288

V₂ = 6.07 L.

Answer:

Explanation:

H₂CO₃(aq) + H₂O(l) ↔ H₃O⁺(aq) + HCO₃⁻(aq)

Let d be the degree of dissociation

.02( 1-d )                              .02d          .02d

Dissociation constant Ka₁ is given

4.3 x 10⁻⁷  = .02d x .02d / .02( 1-d )

= .004 d² / .02  ( neglecting d in denominator )

= .02 d²

d² = 215 x 10⁻⁷

d = 4.636 x 10⁻³

= .004636

concentration of H₃O⁺

= d x .02

= .004636 x .02

= 9.272 x 10⁻⁵

pH = - log [ H₃O⁺ ]

= - log ( 9.272 x 10⁻⁵ )

5 - log 9.272

= 5 - .967

= 4.033 .

Explanation:

Alkali metal refers to group1 elements.

Alkali earth metal refers to group 2 elements.

Non metals refers to elements in grouos 4 to group 7.

Halogen refers to group 17 elements

Transition Metal refers to group 3 to group 12 elements

Noble gases refer to elements in group 18.

To obtain the group number from the electronic configuration, we calculate the total number of electrons in the principal quantum number (coefficient of the letters).

a. [Ne]3s1

Principal quantum number = 3

Number of electrons present = 1

This element belongs to group 1. It is an Alkali Metal.

b. [Ne]3s23p3

Principal quantum number = 3

Number of electrons present = 2 + 3 = 5

This element belongs to group 15 (5A). It is a Non metal

c. [Ar]4s23d104p5

Principal quantum number = 4

Number of electrons present = 2 + 5 = 7

This element belongs to group 17 (7A). It is an Halogen.

d. [Kr]5s24d1

This configuration belongs to the element yttrium and has an incomplete d shell. Hence it is a transition metal.

e. [Kr]5s24d105p6

Principal quantum number = 5

Number of electrons present = 2 + 6 = 8

This element belongs to group 18 (8A). It is a Noble gas.

Answer: light reaction produces oxygen and water as we know the general importance of oxygen and water they are useful for organism to survive if plants do not produce oxygen then how could we get oxygen from the environment

Answer:

(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.

(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.

(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).

PRODUCTS=> C6H5-COOH and Mg^+Br(OH).

Explanation:

A Grignard reagent is a reagent that/which is an organometallic compound that is R -Mg- X. The R = alkyl, vinyl or allyl and the X = halogens.

It must be noted that an important reaction of Grignard reagent is its reaction with compounds containing the Carbonyl that is -CO functional group and this kind of Reaction is known as a Grignard Reaction.

So, in this question we are told that;

=> "1-bromo-benzene andits subsequent reaction with solid carbon dioxide (CO2) followed by acidic workup (using HCl asthe acid). "

Thus;

(A). C6H5Br + Mg(in ether) -----------> C6H5MgBr.

(B). C6H5MgBr + O = C = O -----------> C6H5-COO^- Mg^+ Br.

(C). C6H5-COO^- Mg^+ Br + HCl --------> C6H5-COOH + Mg^+Br(OH).

Answer:

THE INITIAL TEMPERATURE OF THE SECOND SAMPLE IS 4.93 C OR 277.93 K

Explanation:

Mass of first sample of water = 106 g

Initial temp of first sample = 21.4  °C = 21.4 + 273 K = 294.4 K

Mass of second sample = 64.3 g

Final temp of theresulting mixture = 46.8  °C = 46.8 + 273 K = 319.8 K

Specific heat capacity of water = 4.184 J/g K

It is worthy to note that;

Heat gained by the first sample = Heat lost by the second sample

Since heat = mass * specific heat capacity * change in temperature, we have

Mass * specific heat * change in temp of the first sample  = Mass * specific heat * change in temp. of the second sample

MC (T2 - T1) = MC (T2-T1)

106 * 4.184 * ( 319.8 - 294.4) = 64.3 * 4.184 * ( 319.8 - T1)

106 * 4.184 * 25.4 = 269.0312 ( 319.8 - T1)

11 265.0016 = 269.0312 (319.8 - T1)

Since the change in temperature = 319.8 -T1

Change in temperature =11265.0016 / 269.0312

Change in temperature =  41.87

Change in temperature = 319.8 -T1

41.87 = 319.8 - T1

T1 = 319.8 - 41.87

T1 = 277.93 K

T1 = 4.93  °C

So therefore, the initial temperature of the sacond sample is 4.73  °C or 277.93 K

Answer:

See explanation below

Explanation:

This problem is a little long so I'm gonna be as clear as possible.

a) In this case we have two acids, HBr and HCHO2. Between these two acids, the HBr is the strongest, and does not have a Ka value to dissociate, while HCHO2 do.

In order to calculate pH we need the [H₃O⁺], and in this case, as HBr is stronger, the contribution of the weaker acid can be negligible, therefore, the pH of this mixture will be:

pH = -log[H₃O⁺]

pH = -log(0.115)

pH = 0.93

b) In this case it happens the same thing as part a) HNO₃ is the strongest acid, so the contribution of the HNO₂ which is a weak acid is negligible too, therefore the pH of this mixture will be:

pH = -log(0.085)

pH = 1.07

c) Now in this case, HCHO2 and HC2H3O2 are both weak acids, so to determine which is stronger, we need to see their Ka values. In the case of HCHO2 the Ka is 1.8x10⁻⁴ and for the HC2H3O2 the Ka is 1.8x10⁻⁵. Note that the difference between the two values of Ka is just 10¹ order, so, we can neglect the concentration of either the first or the second acid. We need to see the contribution of each acid, let's begin with the stronger acid first, which is the HCHO2, we will write an ICE chart to determine the value of the [H₃O⁺] and then, use this value to determine the same concentration for the second acid and finally the pH:

        HCHO₂ + H₂O <-------> CHO₂⁻ + H₃O⁺     Ka = 1.8*10⁻⁴

i)        0.185                                0          0

c)           -x                                 +x        +x

e)       0.185-x                             x           x

1.8*10⁻⁴ = x² / 0.185-x      

As Ka is small, we can assume that "x is small" too, therefore the (0.185-x) can be rounded to just 0.185 so:

1.8*10⁻⁴ = x²/0.185

1.8*10⁻⁴ * 0.185 = x²

x² = 3.33*10⁻⁵

x = 5.77*10⁻³ M = [H₃O⁺]

Now that we have this concentration, let's write an ICE chart for the other acid, but taking account this concentration of [H₃O⁺] as innitial in the chart, and solve for the new concentration of [H₃O⁺] (In this case i will use "y" instead of "x" to make a difference from the above):

        HC₂H₃O₂ + H₂O <--------> C₂H₃O₂⁻ + H₃O⁺       Ka = 1.8x10⁻⁵

i)          0.225                                  0           5.77x10⁻⁶

c)            -y                                     +y            +y

e)        0.225-y                                y           5-77x10⁻³+y

1.8x10⁻⁵ = y(5.77x10⁻³+y) / 0.225-y   ---> once again, y is small so:

1.8x10⁻⁵ = 5.77x10⁻³y + y² / 0.225

1.8x10⁻⁵ * 0.225 = 5.77x10⁻³y + y²

y² + 5.77x10⁻³y - 4.05x10⁻⁶ = 0

Solving for y:

y = -5.77x10⁻³ ±√(5.77x10⁻³)² + 4*4.05x10⁻⁶ / 2

y = -5.77x10⁻³ ±√4.95x10⁻⁵ / 2

y = -5.77x10⁻³ ± 7.04x10⁻³ / 2

y₁ = 6.35x10⁻⁴ M

y₂ = -6.41x10⁻³ M

We will take y₁ as the value, so the concentration of hydronium will be:

[H₃O⁺] = 5.77x10⁻³ + 6.35x10⁻⁴ = 6.41x10⁻³ M

Finally the pH for this mixture is:

pH = -log(6.41x10⁻³)

pH = 2.19

d) In this case, we have the same as part c, however the Ka values differ this time. The Ka for acetic acid is 1.8x10⁻⁵  while for HCN is 4.9x10⁻¹⁰. In this ocassion, we the difference in their ka is 10⁵ order, so we can neglect the HCN concentration and focus in the acetic acid. Let's do an ICE chart and then, with the hydronium concentration we will calculate pH:

         HC₂H₃O₂ + H₂O <--------> C₂H₃O₂⁻ + H₃O⁺       Ka = 1.8x10⁻⁵

i)          0.050                                  0              0

c)            -y                                     +y            +y

e)        0.050-y                                y              y

1.8*10⁻⁵ = y² / 0.050-y      

As Ka is small, we can assume that "y is small" too

1.8*10⁻⁵ = y²/0.050

1.8*10⁻⁵ * 0.050 = y²

y² = 9*10⁻⁷

y = 9.45*10⁻⁵ M = [H₃O⁺]

Finally the pH:

pH = -log(9.45x10⁻⁵)

pH = 3.02

Answer:

The correct answer to the following question will be Option A (DNA sequencing and profiling).

Explanation:

The other three situations aren't connected to the situation in question. That option 1 seems to be the right answer.

Answer:

1. Non-target

2. Bycatch

Explanation:

In the fishing industry, the main aim of the industry is to capture fishes that can be used or eaten and sell. A variety of fishes are captured for this purpose and since they are used therefore are known as Target catch.

But there are some species which has to be discarded because they are toxic and not useful. These non-useful species like eel which gets captured in the net while capturing other fishes are known as Non-target fish.

The eel fish which gets captured is known as bycatch fishes in the fishing operation.

Thus, Non-target and Bycatch are the correct answer.

Answer:

Its just bycatch

Explanation:

The eel species is called a(n) bycatch of the fishing operation.

Answer:

1188.976 mmHg

Explanation:

Initial pressure P1= 755 mmHg

Initial volume V1 = 6.00 litres

Final volume V2 = 3.81 litres

Final pressure P2= the unknown

Now applying Boyle's Law,we have;

P1V1 = P2V2

Since P2 is the unknown then it has to be made the subject of the formula.

P2=P1V1/ V2

P2= 755 × 6.00/ 3.81

P2= 1188.976 mmHg

Therefore, the new pressure is; 1188.976 mmHg

Complete Question

A chemistry student weighs out 0.950 kg  of an unknown solid compound and adds it to 2.00 L of distilled water at . After minutes of stirring, only some of the has dissolved. The student drains off the solution, then washes, dries and weighs the that did not dissolve. It weighs 0.570 kg.

Required:

a. Using the information above, can you calculate the solubility of X?

b. If so, calculate it. Remember to use the correct significant digits and units. .

Answer:

a

Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate  1 unit volume of the solvent solution at that given temperature.

And from our question we see that substance  X saturated the solvent and there is  still remained undissolved substance X

b

The solubility of X is  [tex]S = 190 g /L[/tex]

Explanation:

From the question we are told that

    The initial mass of the unknown solid is [tex]m_i =0. 950 \ kg[/tex]

    The mass of the undissolved substance is  [tex]m_u = 0.570 \ kg[/tex]

    The volume of the solution is  [tex]V =2.00\ L[/tex]

Yes the solubility of X can be calculated this is because the solubility of a substance dissolved in a solution is the amount of that substance that is needed to saturate  1 unit volume of the solvent solution at that given temperature.

And from our question we see that substance  X saturated the solvent and there is  still remained undissolved substance X

The mass of the substance that dissolved ([tex]m_d[/tex] ) is mathematically represented as

    [tex]m_d = m_i - m_u[/tex]

  [tex]m_d = 0.95 - 0.570[/tex]

    [tex]m_d = 0.38 \ kg = 0.38 *1000 = 380 g[/tex]

The solubility of this substance (X) is mathematically represented as

      [tex]S = \frac{m_d}{V}[/tex]

substituting values

     [tex]S = \frac{ 380}{2}[/tex]

     [tex]S = 190 g /L[/tex]

Answer:

simple cations (monatomic cations of elements of only one possible charge)

Explanation:

Simple cations (monatomic cations of elements of only one possible charge)  are named using the unmodified element name and adding the word "ion"

For example, the Na+ is named the sodium ion.

An atom or molecule with a net electric charge as a result of the loss or gain of one or more electrons is known as an ion.

Answer:

0.077M is the concentration of the hydroxyl ion

Explanation:

If 7.35 cm3 of this base is take and diluted to 147 cm3, then what is the concentration of the hydroxyl ion?

Use the dilution equation:

M1V1 = M2V2

M1 * 147cm³ = 1.5 M * 7.35 cm³

M1 = 1.5 M * 7.35 cm³ / 147 cm³

M1 = 0.077 M

How many moles of hydroxyl ion are there in the 7.35 cm3?

1000 cm³ contains 1.5 mol OH- ions

7.35 cm³ contains : 7.35 cm³ / 1000 cm³ *1.5 mol

= 0.011025 mol

Answer:

On the particulate level: 6.02 * 10²³ particles of CO(g) reacts with 6.02 * 10²³ particles of Cl₂(g) to form 6.02 * 10²³ particles of COCl2(g).

On the molar level: 1 mole of CO(g) reacts with 1 mole of Cl2(g) to form 1 mole of COCl₂(g).

Explanation:

The particulate level refers to the microscopic or atomic level of substances. It also involves the ions, protons, neutrons and molecules present in substances.

The molar level refers to the quantitative measure of substances in terms of the mole, where a mole represents the amount of substances containing the Avogadro number of particles which is equal to 6.02 * 10³ particles.

Equation of the reaction: CO(g) + Cl₂(g) ----> COCl₂(g)

From the equation above, I mole of CO gas reacts with 1 mole of Cl₂ gas to produce 1 mole of COCl₂ gas.

Since 1 mole of a substance contains 6.02 * 10²³ particles, on a particulate level, 6.02 * 10²³ particles of CO gas reacts with 6.02 * 10²³ particles of Cl₂ gas to produce 6.02 * 10²³ particles of COCl₂ gas.

Answer:

D

Explanation:

Logitudinal waves also known as compression waves.

It involves displacing the medium perpendicular to the motion of the wave is not a characteristic of a transverse mechanical wave. Option B is correct.

A transverse mechanical wave is a disturbance created by it to transfer energy from one point to another. while the proposition happens the particle present within the medium get vibrates.

in a transverse wave, the particle present will vibrate up and down and are perpendicular to the wave's propagation direction. The particles shake in a directional wave in the longitudinal wave propagation.

Therefore, is not a characteristic of a transverse mechanical wave. Option B is correct. It involves displacing the medium perpendicular to the motion of the wave.

Learn more about transverse mechanical waves, here:

https://brainly.com/question/23374194

#SPJ6

Answer:

recycled is limited through enviroment and matter on earth

Explanation:

Answer:

The empirical formula of dimethylmercury is C2H6Hg

Explanation:

Dimethylmercury, as it says in the name, presents not only the mercury metal in its structure (Hg) but also two radical groups called methyl, which is why its name begins with the prefix DI, referring to the fact that there are two methyl.

Answer:

The molecules in the thermometer’s liquid spread apart

Explanation:

The molecules in the thermometer’s liquid spread apart.

A thermometer is a device that measures temperature or a temperature gradient.

The liquid (water) in thermometer exhibits convex meniscus, as a result of this meniscus, the water molecules in the thermometer will spread apart when temperature is measured.

Learn more about thermometer here: https://brainly.com/question/21720093

Answer:

B.Handling the crucible directly with your hands.

D.Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements.

E.Taking the mass of all samples with the lid included.

Explanation:

When observed critically , the measures associated with the errors which could cause your percent yield to be falsely high, or even over 100% are those which increase the weight of the substance with the individual neglecting.

Handling the crucible directly with your hands,Taking the mass of the empty crucible without the lid, but including the lid in all other mass measurements and taking the mass of all samples with the lid included will all increase the weight of the substance. Instead the substance should be placed alone without any form of support or contamination.

Answer:

Canonical structures of a chemical specie explain its observed properties from a valence bond theory perspective.

Explanation:

Resonance is a valence bond concept introduced by Linus Pauling to explain the observed properties of certain chemical species such as bond lengths, bond angles, bond order , etc.

There are certain chemical species for which a single chemical structure does not suffice in explaining its observed properties. For instance, the bond order in CO3^2- is about 1.33. Its bond length, shows that the C-O bond present in CO3^2- is neither a pure C-O single bond nor a pure C-O double bond. Hence the structure of CO3^2- is 'somewhere in between' three contributing canonical structures as shown in the image attached to this answer. The resonance structures of NO3^- are also shown.

Answer:

21 mL of NaOH is required.

Explanation:

Balanced reaction: [tex]HBr+NaOH\rightarrow NaBr+H_{2}O[/tex]

Number of moles of HBr in 11.0 mL of 0.30 M HBr solution

= [tex](\frac{0.30}{1000}\times 11.0)[/tex] moles = 0.0033 moles

Let's say V mL of 0.16 M NaOH solution is required to reach equivalence point.

So, number of moles of NaOH in V mL of 0.16 M NaOH solution

= [tex](\frac{0.16}{1000}\times V)[/tex] moles = 0.00016V moles

According to balanced equation-

1 mol of HBr is neutralized by 1 mol of NaOH

So, 0.0033 moles of HBr are neutralized by 0.0033 moles of NaOH

Hence, [tex]0.00016V=0.0033[/tex]

           [tex]\Rightarrow V=\frac{0.0033}{0.00016}=21[/tex]

So, 21 mL of NaOH is required.

Answer:

Exothermic reaction.

Explanation: