compound is 53.31% c, 53.31 % c , 11.18% h, 11.18 % h , and 35.51% o 35.51 % o by mass. what is its empirical formula? insert subscripts as needed.

Your eye level should be parallel to the level of the meniscus when measuring liquids in a graduated cylinder.

While measuring liquids in a graduated cylinder, it is critical to keep your eye level in the line up with the level of the meniscus. The meniscus is the bent surface of the fluid that structures at the highest point of the fluid in the graduated chamber.

This bent surface can make the fluid level seem higher or lower than it really is, contingent upon the place where it is seen. By keeping your eye level line up with the meniscus, you can kill any parallax mistake and get a more precise estimation. To peruse the volume of the fluid precisely, you ought to ensure the lower part of the meniscus is at the graduation line on the chamber.

Learn more about meniscus:

https://brainly.com/question/30335396

#SPJ4

The overall order of the reaction is 3.

What is Order of Reaction?

The order of a chemical reaction refers to the number of molecules or atoms involved in the rate-determining step of the reaction. It is a measure of the relationship between the concentration of the reactants and the rate of reaction. The order of a reaction can be determined experimentally by measuring the initial rates of the reaction at different concentrations of the reactants.

The order of a reaction is the sum of the exponents of the concentration terms in the rate law equation.

Let's write the rate law equation for this reaction as:

rate = k[A]^x[B]^y

where k is the rate constant and x and y are the orders of the reaction with respect to A and B, respectively.

Using the given data, we can determine the values of x and y.

For Trial 1: rate = k(0.20)^x(0.20)^y = 0.4

For Trial 2: rate = k(0.20)^x(0.40)^y = 1.6

For Trial 3: rate = k(0.40)^x(0.20)^y = 0.8

Dividing Trial 2 by Trial 1, we get:

(0.20/0.20)^y = 4

y = 2

Dividing Trial 3 by Trial 1, we get:

(0.40/0.20)^x = 2

x = 1

Therefore, the overall order of the reaction is:

x + y = 1 + 2 = 3

So, the overall order of the reaction is 3.

Learn more about Order of Reaction from given link

https://brainly.com/question/28179168

#SPJ1

The name for the compound with the formula NH4NO2 is ammonium nitrite.

This is an inorganic compound that is made up of ammonium cation (NH4+) and nitrite anion (NO2-). It is a white crystalline solid that is highly soluble in water and decomposes at temperatures above 60°C. Ammonium nitrite is used in various industrial processes, including in the production of dyes, pharmaceuticals, and explosives. It is also used as a reagent in organic chemistry reactions. While ammonium nitrite is not considered as a highly dangerous compound, it can decompose into toxic nitrogen oxides when heated, so appropriate safety precautions must be taken when handling it.Ammonium nitrite (NH4NO2) is a colorless, crystalline solid compound that is soluble in water. It is an unstable compound that is used in the production of nitrogen gas and as a reagent in organic chemistry. When heated, ammonium nitrite decomposes into nitrogen gas and water, making it a potential source of nitrogen gas for various industrial and chemical processes. However, ammonium nitrite is a hazardous and unstable compound that can undergo explosive decomposition when subjected to heat, shock, or friction, making it dangerous to handle and store. As a result, it is heavily regulated and restricted for use in many countries.

Learn more about ammonium nitrite here:

https://brainly.com/question/1111916

#SPJ4

The structural shape of a peptide chain in which it establishes hydrogen bonds with other peptide chains in the same direction is referred to as being part of a parallel "sheet."

A parallel sheet is a common secondary structural component of proteins that consists of a row of neighbouring peptide strands stacked one on top of the other, with each strand being made up of a stretched-out, elongated polypeptide chain. In this conformation, adjacent strands are parallel to one another and establish hydrogen bonds with the same direction between the backbone atoms of each strand. The name "pleated sheet" derives from the distinctive pattern of alternating up-and-down twists that results from this orientation of the strands. In comparison to antiparallel sheets, parallel sheets typically feature grooves between neighbouring strands that are longer and shallower. Between the amino acid residues inside and between the strands, hydrogen bonds and van der Waals interactions help to sustain this structural configuration.

Learn more about parallel sheet here:

https://brainly.com/question/18121190

#SPJ4

When 10 gram of steam condenses into liquid water it releases a heat of magnitude 5.33 Kcal.

When the steam of water that is a gaseous state condenses into liquid water a change of state is taking place and the formula for the amount of energy released when the change of state is taking place is given by,

Q = mL

Where Q is the amount of heat, m is the mass of water which is given to 10 grams and L is the latent heat of fusion of water and that is 533 Cal/g.

Now putting all the values in the above mentioned formula,

Q = 10 x 533

Q = 5330 cal

Q = 5.33 Kcal.

So, the amount of heat released when the water condenses from gas to liquid water is 5.33Kcal.

To know more about latent heat of vaporization, visit,

https://brainly.com/question/26306578#:~:text=Expert%2DVerified%20Answer&text=The%20heat%20absorbed%20by%20the,vaporize%201%20gram%20of%20liquid.

#SPJ4

The adiabatically compressed system has the higher temperature at the end of the compression.

This is because, according to the ideal gas law, pressure and temperature are related by the equation:

PV^γ = constant

Where γ is the ratio of specific heat for the gas. Since the compression is adiabatic, no heat is added to the system and thus γ = 1.4 for most gases. Therefore, the pressure and temperature are related by:

[tex]\frac{P1}{T1} = \frac{P2}{T2}[/tex]

Since P1 and P2 are equal (10 bar) but T2 is greater than T1, it follows that T2 must be greater than T1. Therefore, the adiabatically compressed system has a higher temperature than the isothermally compressed system.

learn more about specific heat Refer:brainly.com/question/11297584

#SPJ4

Copper is an element which comprises of same kind of atoms which can be illustrated by the images.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

Learn more about elements,here:

https://brainly.com/question/13516179

#SPJ9

Your question is incomplete, but most probably your  full question with attached image is:Copper is an element. How do these images of copper illustrate this?

Answer:

Wjat is your question

Explanation:

The reactant within the smaller number of moles isn't always the limiting reactant.

The limiting reactant is the one that gets used up first in a chemical reaction and determines the amount of product that can be formed. The reactant that is present in the smaller number of moles may or may not be the limiting reactant, depending on its stoichiometric ratio with the other reactant(s) and the actual amounts of each reactant present in the reaction.

To determine the limiting reactant, you need to compare the stoichiometric ratios of all the reactants and calculate the amount of product that each reactant could potentially produce. The reactant that produces the least amount of product is the limiting reactant.

Learn more about reactant on:

https://brainly.com/question/6421464

#SPJ1

Answer:

Explanation: The molecular formula is H2O2.

Answer:

H2O2

Explanation:

The molecular formula for hydrogen peroxide can be determined by using its molar mass and the percent composition of hydrogen and oxygen.

First, we need to find the number of moles of each element in 1 mole of hydrogen peroxide.

5.9% of hydrogen peroxide is hydrogen, which is 0.059 moles.

94.1% of hydrogen peroxide is oxygen, which is 0.941 moles.

Next, we use the molar mass to calculate the number of atoms in 1 mole of hydrogen peroxide.

The molar mass of hydrogen is 1 g/mol, so there are 0.059 moles of hydrogen atoms in 1 mole of hydrogen peroxide.

The molar mass of oxygen is 16 g/mol, so there are 0.941 x 16 = 15.056 moles of oxygen atoms in 1 mole of hydrogen peroxide.

Since there are 0.059 moles of hydrogen atoms and 15.056 moles of oxygen atoms in 1 mole of hydrogen peroxide, the molecular formula is H2O2 (two hydrogen atoms and two oxygen atoms).

the number of vacancies per cubic meter of silver at 700°C is approximately 5.16 x [tex]10^{19}[/tex]

The number of vacancies per cubic meter can be calculated using the equation:

n_v = N exp(-Q_v / kT) * C_v

where:

n_v = number of vacancies per cubic meter

N = Avogadro's number = 6.022 x [tex]10^{-23}[/tex]atoms/mole

Q_v = vacancy formation energy = 0.92 eV/atom for silver

k = Boltzmann's constant = 8.617 x [tex]10^{-5}[/tex] eV/K

T = temperature in Kelvin = 700 + 273 = 973 K

C_v = equilibrium fraction of lattice sites that are vacant = 2 x 10^-6

density of Ag = 10.35 g/cm = 10,350 kg/m (1 g/cm = 1000 kg/m)

Plugging in the values:

n_v = 6.022 x [tex]10^{-23}[/tex] ×(-0.92 / (8.617 x [tex]10^{-5}[/tex] × 973)) × (2 x[tex]10^{-6}[/tex]) × 10,350

n_v = 5.16 x [tex]10^{19}[/tex] vacancies/m

Therefore, the number of vacancies per cubic meter of silver at 700°C is approximately 5.16 x [tex]10^{19}[/tex]

learn more about equilibrium fraction here:

https://brainly.com/question/11080417

#SPJ4

The structural fragment that will give rise to this pattern is a -CH2- group that is flanked by two sets of protons.

The characteristic triplet-quartet pattern in the 1H NMR spectrum is typically observed when a proton is coupled to a group of three adjacent protons (a quartet) and a group of two adjacent protons (a triplet) on the same or neighboring carbon atoms. This coupling pattern is known as a "splitting pattern" and is the result of the spin-spin coupling between the neighboring protons.

The quartet arises from the coupling of the proton on the -CH2- group with the three adjacent protons on one side, and the triplet arises from the coupling of the same proton with the two adjacent protons on the other side. The coupling constants for the quartet and triplet depend on the strength of the spin-spin coupling between the protons and the relaxation time of the nuclei involved.

Learn more about nmr spectrum here: brainly.com/question/30667404

#SPJ4

Human activities have disrupted the natural balance in the carbon cycle and are the main reason for the current imbalance.

The equation provided represents the balance in the atmospheric carbon levels. The atmospheric carbon is equal to the sum of all carbon output, such as emissions from fossil fuel burning and deforestation, minus the sum of all carbon inputs, such as photosynthesis and carbon absorption by oceans.

However, due to human activities like burning of fossil fuels, deforestation, and land use changes, the balance in the carbon cycle has been disrupted. The amount of carbon output has increased significantly, leading to a rise in atmospheric carbon levels. Meanwhile, the inputs, such as photosynthesis and carbon absorption by oceans, have not increased proportionately.

As a result, the equation is no longer balanced and there is now more atmospheric carbon than can be absorbed through natural processes. This has led to an increase in greenhouse gases and global warming, causing a range of environmental and health problems.

Therefore, human activities have disrupted the natural balance in the carbon cycle and are the main reason for the current imbalance.

learn more about carbon cycle: https://brainly.com/question/2272536

#SPJ1

Option (b) is correct. The hardness of the mineral being tested lies under 2.5 - 3.5. This is according to the Mohs scale of hardness.

Mohs scale of hardness is used as a convenient way to help identify minerals. The hardness of the mineral is a measure of its relative resistance to scratching measured by scratching the mineral against another substance of known hardness on the Mohs Hardness Scale. This method is useful for identifying minerals in the field because you can test minerals against some very common objects such as fingernail, a penny, a nail. This scale is named from its creator, the German geologist and mineralogist Friedrich Mohs. This scale of mineral hardness is a qualitative ordinal scale from 1 to 10 that characterize scratch resistance of minerals through the ability of harder material to scratch softer material.

To learn more about Mohs scale of hardness please visit:

https://brainly.com/question/1585664

#SPJ4

The complete question is,

If we find that a mineral can leave a deep scratch in glass, what is the hardness of the mineral being tested?

(a) <2.5

(b) 2.5-3.5

(c) 3.5-4.5

(d) 4.5-5.5

(e) >5.5

Isopropanol has a molality in water of 9.1315 M. suppose a solution is created using 275.0 ml of water and 191.7 ml of isopropanol, both of which have a density of 1.000 g/ml.

Molarity = grams of solute/molar mass of solute x 1/mass of solvent(Kg)

mass os isopropanol = density x volume

= 0.7860 g/ml x 191.7 ml

= 150.6762 gm

mass of water(solvent) = 275.0 ml x 1.000 g/ml

=275.0 gm

= 0.275 Kg

Molarity = 150.67gm / 60g/mol x 1/0.275Kg

Molarity = 9.1315 M

The number of moles of solute per litre of solution is known as molecularity or molar concentration.

The mass or moles of solute and the volume of the solution can be converted using molar concentration.

Homogeneous mixes are created when ingredients are combined in a way that ensures the composition is consistent throughout the sample. The term "heterogeneous" refers to a mixture that does not have a constant composition across the sample.

Learn more about Molarity here:

https://brainly.com/question/8732513

#SPJ4

The equilibrium constant, represented as Kc or Keq, is a value that expresses the extent of a chemical reaction at equilibrium

The characteristics of the equilibrium constant include:

It is a constant value: The equilibrium constant has a fixed value at a given temperature and pressure for a particular chemical reaction. It is independent of the initial concentrations (or partial pressures) of the reactants and products, and it does not change with time once equilibrium has been reached. It is related to the degree of completion of a reaction: The magnitude of the equilibrium constant indicates the degree to which a reaction has proceeded towards completion. It is affected by temperature: The equilibrium constant is dependent on temperature.  It depends on the stoichiometry of the reaction: The equilibrium constant is calculated based on the stoichiometry of the balanced chemical equation for the reaction. It can be used to predict the direction of the reaction: The value of the equilibrium constant can be used to predict the direction in which the reaction will proceed under certain conditions.

To learn more about equilibrium please visit- https://brainly.com/question/28527601
#SPJ4

The pH level of a solution is a measure of its acidity or alkalinity. In general, the higher the pH level, the more basic (alkaline) the solution. Different sugars can have different effects on the pH level of a solution.

Acidity is a measure of the concentration of hydrogen ions (H+) in a solution. It's measured by the pH scale, which ranges from 0 to 14. Acids have a pH value of less than 7, while bases have a pH value greater than 7.

Normal sugar (sucrose) has a neutral pH of 7, meaning it does not have an effect on the pH level of a solution. Brown sugar, on the other hand, is slightly acidic with a pH of about 5.5. Diet sugar, such as aspartame and saccharin, is even more acidic, with a pH of 3.5 or lower.

When performing the yeast experiment with balloons, the type of sugar used can have an effect on the pH level of the solution. The most acidic sugar, diet sugar, will have the greatest effect on the pH level, as it will lower the pH of the solution. This could potentially affect the yeast activity and the rate at which the balloons inflate.

To learn more about acidity
https://brainly.com/question/172153
#SPJ1

The presence of water of hydration in sodium carbonate used for standardizing hydrochloric acid can lead to a lower calculated molarity of the HCl.

This is because water molecules can react with the HCl during the titration process, consuming some of the HCl that would otherwise be available to react with the sodium carbonate.

If the sodium carbonate used in the titration contains water of hydration, the mass of the substance used will be greater than if it was anhydrous, which can lead to an overestimate of the amount of acid required for complete neutralization. This would result in a lower calculated molarity of the HCl.

Additionally, the water of hydration can affect the stoichiometry of the reaction between HCl and Na2CO3, leading to a lower number of moles of HCl consumed per mole of Na2CO3. This would also result in a lower calculated molarity of the HCl.

Therefore, it is important to use anhydrous sodium carbonate when standardizing HCl to ensure accurate and precise results.

Find more about sodium carbonate

brainly.com/question/20479996

#SPJ4

This is because catalysis happens on the surface.

We need something very shallow or thin and maximizing the surface area of that can give the most effective catalysis. We don't need a large depth of objects, so picking something with a high surface area and spreading the metal out really thin, maximize the possible surface area without using very much precious metal, given that precious metals are expensive and often rare.

Process of changing reaction rate using catalyst is called catalysis.

Any class of substances that have a lustrous appearance characterized by high electrical and thermal conductivity as well as by malleability is metal.

To know more about catalysis, visit:

https://brainly.com/question/1372992

#SPJ1

The correct order for atomic radius for Mg, Na, P, Si, and Ar is

d. Ar > Si > P > Na > Mg.

Atomic radius refers to the size of an atom, which is determined by the distance between the nucleus and the outermost electrons. The size of an atom decreases from left to right across a row in the periodic table because the number of protons in the nucleus increases, creating a stronger attractive force that pulls the electrons closer to the nucleus. The size of an atom also decreases from top to bottom within a group or column in the periodic table because the number of electron shells increases, resulting in a greater shielding effect that reduces the attractive force between the nucleus and outer electrons.

To learn more about Atomic radius here:

https://brainly.com/question/13607061

#SPJ4

Balanced equation of the following are:Solid aluminium is put with aqueous magnesium nitrate:

Mg(NO3)2(aq) + Al(s) → Mg(s) + Al(NO3)3(aq)

2. Aqueous potassium sulphate is combined with aqueous barium hydroxide:

Ba(OH)2(aq) + K2SO4(aq) → BaSO4(s) + 2KOH(aq)

3. Solid barium oxide is heated:

BaO(s) → BaO2(s) + O2(g)

4 When calcium is added to nitrogen gas, a reaction occurs in which the calcium metal reacts with the nitrogen gas to form calcium nitride (Ca3N2). Solid calcium is added to nitrogen gas

Ca(s) + N₂(g) → Ca3N2(s)

5.  Solid lithium reacts with oxygen gas:

Li(s) + O2(g) → Li2O(s)

6.Balanced equation of Aqueous zinc chloride is added to solid sodium:ZnCl2(aq) + Na(s) → Zn(s) + 2NaCl(aq)

learn more about magnesium nitrate Refer:brainly.com/question/29801876

#SPJ4

The answer to the multiple choice question is 70 kilocalories provided by 10 grams of pure alcohol.

Alcohol is a type of macronutrient that provides energy to the body. It is considered the fourth macronutrient, besides carbohydrates, proteins, and fats. Alcohol is broken down into acetaldehyde and then into acetate, which is converted into energy in the body.

One gram of alcohol provides 7 kilocalories of energy, which is almost double the amount provided by carbohydrates and proteins. The energy derived from alcohol is not used as efficiently by the body as energy derived from other macronutrients, such as carbohydrates, proteins, and fats. This is because the energy derived from alcohol is quickly metabolized by the liver, leading to a temporary increase in energy but also making the body more prone to energy crashes.

Therefore, while alcohol does provide energy to the body, it is important to consume it in moderation to avoid negative health effects.

Learn more about  pure alcohol

brainly.com/question/889427

#SPJ4

The percent concentration is 25%.

Percent by volume (also known as volume percent or percent by volume ) is a measure of the concentration of a solute in a solution expressed as a percentage of the total volume of the solution. It is calculated by dividing the volume of the solute by the total volume of the solution and multiplying by 100.

The percent by volume;

Volume of acetic acid/Total volume * 100

= 20 mL/80 mL * 100/1

= 25%

\It's important to note that percent by mass is not the same as percent by volume.

Learn more about percent concentration:https://brainly.com/question/202460

#SPJ1

Answer:

the answer is A: 7.0 ppm

Explanation:

To calculate the dissolved oxygen concentration in parts per million (ppm), we need to divide the mass of the dissolved oxygen (0.0070 g) by the mass of the water solution (1000 g) and then multiply by 10^6 to convert the result to ppm.

0.0070 g / 1000 g * 10^6 = 7.0 ppm

The dissolved oxygen concentration in parts per million (ppm)  for 0.0070 gram of oxygen in 1000 g of water is 7 ppm. Hence, option A is correct.

Dissolved oxygen (DO) refers to the amount of molecular oxygen (O2) dissolved in water or another liquid. It is an important measure of water quality, as many aquatic organisms depend on dissolved oxygen to survive.

Dissolved oxygen concentration (ppm) = (mass of dissolved oxygen / mass of solution) x 10^6

The mass of the solution is the mass of the water plus the mass of the dissolved oxygen:

mass of solution = 1000. grams of water + 0.0070 gram of oxygen

mass of solution = 1000.0070 grams

Substituting the values in the formula, we get:

Dissolved oxygen concentration (ppm) = (0.0070 / 1000.0070) x 10^6

Dissolved oxygen concentration (ppm) ≈ 6.9997 ppm

Therefore, the dissolved oxygen concentration of this solution in parts per million is approximately 7.0 ppm (option A).

Find more on dissolved oxygen :

https://brainly.com/question/30243479

#SPJ2

NMR signals may consist of a single peak, be split into several peaks, which is known as multiplicity.

The number of peaks of NMR and their relative intensities provide information about the chemical environment of the nuclei being observed. Multiplicity arises from spin-spin coupling between the observed nucleus and one or more neighboring nuclei. This coupling occurs because the magnetic field generated by the neighboring nuclei affects the local magnetic field experienced by the observed nucleus. The pattern of multiplicity can provide valuable information about the number and types of neighboring nuclei and the nature of the chemical bonds between them.

Learn more about NMR here:

https://brainly.com/question/9442853

#SPJ4

Answer:

Synthesis reaction

Explanation:

A synthesis reaction, also known as a combination reaction, is a type of chemical reaction in which two or more substances react to form a new, more complex compound. This reaction involves the formation of a new chemical bond between the reactants, resulting in the creation of a new substance.

Answer:

Synthesis reaction

Explanation:

A synthesis reaction is a type of chemical reaction in which two or more simpler reactants combine to form a more complex product. The term "synthesis" is derived from the Greek word "syntithenai," which means "to put together." In a synthesis reaction, the reactants combine to form a new compound through the sharing of electrons between the atoms.

For example, the synthesis of water can be represented by the chemical equation:

2H + O2 -> 2H2O

In this reaction, two hydrogen atoms and one oxygen molecule combine to form two molecules of water. The electrons from the hydrogen atoms are shared with the oxygen atom to form covalent bonds, resulting in the formation of a new compound.

Synthesis reactions are important in many industrial processes, including the production of fertilizers, fuels, and pharmaceuticals, and play a crucial role in the formation of complex organic compounds in nature.


ALLEN

The voltage produced by the colorimeter is __________ to the absorbance of the sample and ____________ to the light intensity.

E) None of the above

Relation between transmittance and absorbance is as follows.

Therefore we know that the amount of light that passes through a solution is known as transmittance.

It can be expressed as follows;

T= [tex]\frac{I_{t} }{I_{0} }[/tex]

Now we know that, I, is the intensity of transmitted light.

I is the initial intensity of light beam.

Then the colorimeter produces an output voltage which is linearly varies with transmittance that is light intensity.

Relation between absorbance and transmittance is as follows:

A = log ([tex]\frac{1}{T}[/tex])

The reciprocal of transmittance of the sample varies logarithmically varies with absorption.

Therefore, we can say that the voltage produced by the colorimeter is varies logarithmically reciprocal to the absorbance of the sample and linear to the light intensity.

To learn more about light intensity, click here:

brainly.com/question/9195922

#SPJ4

In a 1h nmr spectrum of the following compound, unfield is the position of the hydrogens on carbon a be in relation to the hydrogens on carbon b.

The hydrogens on carbon A will be situated at a greater chemical shift than the hydrogens on carbon B in the compound's 1H NMR spectra.

This is because the closeness of the electron-withdrawing nitrogen atom to the hydrogens on carbon A causes a larger degree of deshelling. This results in a stronger chemical shift for the hydrogens on carbon A and leads the hydrogens there to deshell more quickly than the hydrogens there.

Learn more about the nmr spectrum:

https://brainly.com/question/30546657

#SPJ4

the element is in group 2