The correct answer is D. a = ~120° and ~109.5°; b = 12; c = 1.
Step 1: The approximate bond angles around the two oxygen atoms in alanine are ~120° and ~109.5°. The first value represents the bond angle between the central carbon atom and one of the oxygen atoms, while the second value represents the bond angle between the central carbon atom and the other oxygen atom.
Step 2: There are a total of 12 oxygen (O) bonds in alanine. Each oxygen atom forms two bonds, one with the central carbon atom and another with a hydrogen atom.
Step 3: There is 1 nitrogen (N) bond in alanine. The nitrogen atom forms a single bond with the central carbon atom.
In summary, the approximate bond angles around the oxygen atoms are ~120° and ~109.5°, there are 12 oxygen (O) bonds, and there is 1 nitrogen (N) bond in alanine.
Learn more about alanine
brainly.com/question/28148042
#SPJ11
numbers of isomers in the Alkane family
The number of isomers in the alkane family depends on the number of carbon atoms present in the molecule. Alkanes are hydrocarbons with only single bonds between carbon atoms, and they follow the general formula CnH2n+2, where n represents the number of carbon atoms.
For a given number of carbon atoms, the number of isomers increases exponentially. Here are the number of isomers for different numbers of carbon atoms:
1. Methane (CH4): Only one possible structure. No isomers.
2. Ethane (C2H6): Again, only one possible structure. No isomers.
3. Propane (C3H8): There are two possible structures: a straight-chain structure and a branched structure. These are isomers.
4. Butane (C4H10): There are two isomers: two straight-chain structures and one branched structure.
5. Pentane (C5H12): There are three isomers: three straight-chain structures and two branched structures.
6. Hexane (C6H14): There are five isomers: five straight-chain structures and three branched structures.
7. Heptane (C7H16): There are nine isomers: nine straight-chain structures and five branched structures.
As the number of carbon atoms increases, the number of possible isomers increases dramatically. The exact number of isomers for a given alkane can be determined using principles of organic chemistry and structural isomerism. The branching of the carbon chain can lead to different arrangements and configurations, resulting in multiple isomers.
It is important to note that the number of isomers mentioned above represents the structural isomers, where the carbon chain arrangements differ. However, there can also be other types of isomers, such as stereoisomers, for compounds with more complex structures.
The number of isomers continues to increase with larger alkane molecules, making it impractical to list all the possible isomers for higher members of the alkane family. However, the general trend is that as the number of carbon atoms increases, the number of isomers also increases exponentially.
for more questions on alkane family
https://brainly.com/question/32392756
#SPJ8
which of the following changes would result in an increase in the entropy of the system? select all that apply.
A crystal of sodium chloride is heated from 275K to 290K, an ice cube melts at 273K and a tire is punctured, releasing the gas trapped inside would result in an increase in the entropy of the system. All the options are correct.
The following changes would result in an increase in the entropy of the system:
An ice cube melts at 273KWhen ice cubes are subjected to heat, they melt and convert into liquid water. This process of melting increases the disorder of the ice cubes, and therefore, the entropy of the system increases. A tire is punctured, releasing the gas trapped inside.
When the tire is punctured, the pressure inside the tire drops, and the gas trapped inside the tire escapes into the surroundings. This process increases the disorder of the gas molecules and therefore, the entropy of the system increases. A crystal of sodium chloride is heated from 275K to 290K When a crystal of sodium chloride is heated, the disorder of the atoms/molecules in the crystal increases, but the order of the crystal structure remains the same.
Therefore, All the options are correct.
Learn more about entropy -
brainly.com/question/419265
#SPJ11
For a particular reaction, the standard entropy change is 531
J/K and the standard enthalpy change is 322 kJ. At what temperature
will this reaction become spontaneous?
The spontaneity of a chemical reaction is determined by the change in Gibbs free energy, which is determined by the equation ΔG = ΔH - TΔS. If ΔG is negative, the reaction is spontaneous, while if ΔG is positive, the reaction is non-spontaneous.
The equation can also be written as ΔG = ΔG° + RTlnQ, where ΔG° is the standard free energy change, R is the gas constant, T is the temperature, and Q is the reaction quotient. If ΔG° is negative, the reaction is spontaneous under standard conditions (1 atm pressure and 298 K).
If the standard entropy change is positive, it means that the disorder or randomness of the system is increasing. This is a favorable condition for spontaneity since spontaneous processes tend to lead to greater disorder. Therefore, if the standard entropy change for a reaction is positive, it increases the likelihood that the reaction will be spontaneous.
However, the sign of the standard enthalpy change (ΔH°) must also be considered, as it can either increase or decrease the spontaneity of the reaction. If ΔH° is negative (exothermic reaction), it will increase the spontaneity of the reaction, while if ΔH° is positive (endothermic reaction), it will decrease the spontaneity of the reaction. Therefore, both the signs of ΔH° and ΔS° must be considered when determining the spontaneity of a reaction.
If the standard entropy change (ΔS°) is 531, it indicates that the disorder of the system is increasing, which favors spontaneity. However, the sign of ΔH° is not given, so it cannot be determined whether the reaction is spontaneous or non-spontaneous based on this information alone. Further information is needed to determine the spontaneity of the reaction.
To know more about Gibbs free energy, here
https://brainly.com/question/13795204
#SPJ11
Write the IUPAC name for the following compound. Note: You will probably not be able to answer this question until we have finished chapter 3 .
IUPAC Name for the given compound:The given compound's formula is not provided. Hence, I am unable to provide the IUPAC name for the compound.
IUPAC (International Union of Pure and Applied Chemistry) nomenclature is a method of naming organic chemical compounds that are accepted worldwide. The IUPAC name is also known as the systematic name of a compound, as it follows a systematic set of rules to identify the compound. For instance, the IUPAC name of CH3CH2CH2OH is 1-propanol.
Organic chemistry is the study of carbon-containing compounds, and it is concerned with the chemical and physical properties, structures, and reactions of organic compounds. The IUPAC (International Union of Pure and Applied Chemistry) nomenclature is a widely used naming system for organic compounds.The IUPAC nomenclature system is designed to provide a unique, systematic name for every organic compound based on its molecular structure. The IUPAC name of a compound consists of a prefix that indicates the number of carbon atoms in the compound's longest chain, a suffix that indicates the functional group or groups present in the compound, and various other prefixes and suffixes that indicate the presence of substituents or other functional groups.
In conclusion, to provide the IUPAC name of a compound, it is necessary to follow a systematic set of rules established by the International Union of Pure and Applied Chemistry. The IUPAC name of a compound is crucial in identifying its molecular structure, as it provides a unique and systematic name based on the compound's molecular structure.
To know more about Name visit
https://brainly.com/question/28975357
#SPJ11
Uing your cientific knowledge, write a claim explaining what could be done to increae the forward reaction of the following equation
CaO()H2p(I) to Ca(OH)2()heat
claim:
Evidence:
Reaoning:
Increasing the temperature and adding excess water can increase the forward reaction of the equation CaO(s) + H2O(l) → Ca(OH)2(s) + heat.
To increase the forward reaction of the given equation, there are two main strategies that can be employed: increasing the temperature and adding excess water.
Firstly, raising the temperature of the system promotes the forward reaction. According to Le Chatelier's principle, an increase in temperature favors the endothermic reaction. In this case, the forward reaction is endothermic, as indicated by the "heat" term on the right side of the equation. By providing more heat, the equilibrium shifts towards the formation of more Ca(OH)2.
Secondly, adding excess water (H2O) to the reaction mixture can also drive the forward reaction. This is due to the principle of mass action, which states that increasing the concentration of reactants leads to a higher rate of reaction. By providing more water, the concentration of H2O increases, favoring the forward reaction and resulting in the production of more Ca(OH)2.
Both these strategies work together to increase the forward reaction and enhance the formation of Ca(OH)2. By raising the temperature and ensuring the availability of excess water, the equilibrium is shifted towards the desired product.
Learn more about Temperature
brainly.com/question/7510619
#SPJ11
design synthetic ,using retrosynthetic.
provide all conditions
any other commercially available precursors that contain only {C}, {H} and {O}
To design a synthetic route using retrosynthesis, we need to start by identifying the target molecule and breaking it down into simpler precursors. In this case, the target molecule is not specified, so I cannot provide a specific synthetic route. However, I can explain the concept of retrosynthesis and how it is used.
Retrosynthesis is a technique used in organic chemistry to plan the synthesis of complex molecules by working backwards from the target compound to simpler starting materials. It involves breaking down the target molecule into smaller fragments or precursors, which can then be obtained through known reactions or commercially available compounds.
When designing a synthetic route using retrosynthesis, you need to consider the following steps:
1. Identify the target molecule: Determine the structure of the molecule you want to synthesize.
2. Break it down: Mentally break the target molecule into smaller fragments or precursors. These fragments should ideally contain only carbon (C), hydrogen (H), and oxygen (O) atoms, as mentioned in your question.
3. Identify known reactions: Identify known reactions that can be used to assemble the precursor fragments. This requires knowledge of various functional group transformations and reaction mechanisms.
4. Plan the synthesis: Once you have identified the precursors and known reactions, plan the synthesis by working backwards from the target molecule to the starting materials. This involves connecting the precursors in a logical sequence using the known reactions.
5. Consider conditions: When designing the synthetic route, consider the reaction conditions required for each step. This includes factors such as temperature, pressure, solvent, and catalysts. The specific conditions will depend on the reaction being used.
6. Consider commercially available precursors: Check if any of the precursors required for the synthesis are commercially available. If so, it can simplify the synthesis by eliminating the need to prepare those precursors from scratch.
#SPJ11
functional groups of the reactant and product. https://brainly.com/question/30598839
(1) The total heat capacity of a Bomb-type calorimeter, C, can be obtained from a sample with a known value of reaction heat. Assume that 0.500 g of benzoic acid (C 3
H 3
COOH .
molar mass is 122.12 g/mol ) completely burns in a steel bomb (with oxygen) of a bomb calorimeter containing 1209 g of water. The temperature of the system increases from 296.35 K to 298.59 K. It is known that the reaction heat effect of complete combustion of benzoic acid under these conditions is −3226KJ/mol. The specific heat capacity of water is 4.184 J/g/K. Try to calculate the heat capacity of the Bomb-type calorimeter.
The heat capacity of the Bomb-type calorimeter is approximately -5897 J/K. To calculate the heat capacity of the Bomb-type calorimeter (C), we can use the equation:
Q = C * ΔT
where Q is the heat absorbed or released by the system, C is the heat capacity, and ΔT is the change in temperature.
In this case, the heat absorbed by the system (Q) can be obtained from the reaction heat of combustion of benzoic acid. The reaction heat effect of complete combustion of benzoic acid is -3226 kJ/mol.
First, we need to calculate the number of moles of benzoic acid used:
Number of moles = Mass / Molar mass
Number of moles = 0.500 g / 122.12 g/mol
Number of moles ≈ 0.004098 mol
Next, we need to calculate the heat absorbed by the system (Q):
Q = -3226 kJ/mol * 0.004098 mol
Q ≈ -13.220 kJ
Since 1 kJ = 1000 J, we convert the heat absorbed to joules:
Q = -13.220 kJ * 1000 J/kJ
Q ≈ -13,220 J
Now, we can calculate the change in temperature (ΔT):
ΔT = Final temperature - Initial temperature
ΔT = 298.59 K - 296.35 K
ΔT ≈ 2.24 K
Finally, we can calculate the heat capacity of the Bomb-type calorimeter (C):
C = Q / ΔT
C = -13,220 J / 2.24 K
C ≈ -5897 J/K
Therefore, the heat capacity of the Bomb-type calorimeter is approximately -5897 J/K.
To know more about heat visit :
https://brainly.com/question/13860901
#SPJ11
An aqueous solution is 22.0% by mass
ethanol,
CH3CH2OH, and has a density
of 0.966 g/mL.
The molality of ethanol in the solution is
The molality of ethanol in the aqueous solution is 0.399 mol/kg.
the molality of ethanol in the solution, we need to calculate the amount of ethanol in moles and divide it by the mass of water in kilograms.
Mass percent of ethanol = 22.0%
Density of the solution = 0.966 g/mL
We need to determine the mass of ethanol and water in the solution.
Assuming we have 100 grams of the solution, the mass of ethanol would be 22.0 grams (since it is 22.0% by mass).
The mass of water can be calculated by subtracting the mass of ethanol from the total mass of the solution:
Mass of water = Total mass of solution - Mass of ethanol
Mass of water = 100 g - 22.0 g
Mass of water = 78.0 g
We convert the mass of ethanol and water to moles.
Molar mass of ethanol (CH3CH2OH) = 46.07 g/mol
Number of moles of ethanol = Mass of ethanol / Molar mass of ethanol
Number of moles of ethanol = 22.0 g / 46.07 g/mol
We need to calculate the molality.
Molality (m) = Number of moles of solute / Mass of solvent in kg
Mass of solvent in kg = Mass of water / 1000 (since 1 kg = 1000 g)
Substituting the values:
Molality = (22.0 g / 46.07 g/mol) / (78.0 g / 1000)
Molality ≈ 0.399 mol/kg
Therefore, the molality of ethanol in the aqueous solution is 0.399 mol/kg.
To know more about molality refer here
https://brainly.com/question/30640726#
#SPJ11
h2cs lewis structure
The Lewis structure of H2CS (methylene sulfide) consists of a central carbon atom bonded to two hydrogen atoms and a sulfur atom, with a double bond between carbon and sulfur.
The Lewis structure is a representation of how atoms are connected in a molecule and how valence electrons are distributed. To determine the Lewis structure of H2CS, we follow a step-by-step approach.
1. Count the valence electrons: Hydrogen (H) contributes 1 valence electron, Carbon (C) contributes 4 valence electrons, and Sulfur (S) contributes 6 valence electrons. With two hydrogen atoms, the total valence electrons in H2CS is 12.
2. Identify the central atom: In H2CS, the carbon atom (C) serves as the central atom because it is less electronegative than sulfur (S).
3. Connect the atoms: Carbon (C) is bonded to two hydrogen (H) atoms, and sulfur (S) is connected to carbon (C) through a single bond.
4. Distribute remaining electrons: Place lone pairs and complete octets around each atom. Carbon (C) forms four single bonds, using two electrons for each hydrogen (H) atom. Sulfur (S) has a single bond to carbon (C) and two lone pairs.
H - C = S
|
H
5. Check the octet rule: Count the electrons used. In H2CS, we have 2 electrons for each hydrogen (H) atom, 4 electrons for carbon (C), and 6 electrons for sulfur (S), totaling 14 electrons. This exceeds the initial count of 12 electrons.
6. Adjust the electron count: To accommodate the extra electrons, form a double bond between carbon (C) and sulfur (S) using two lone pairs from sulfur (S).
Learn more about Lewis structures
brainly.com/question/32988499
#SPJ11
a solution is made by dissolving 4.50 g of nacl in enough water to make 70.0 ml of solution. what is the concentration of sodium chloride in units of weight/volume percent?
To calculate the weight/volume percent concentration of sodium chloride in the solution, we need to determine the mass of sodium chloride and the volume of the solution.
Given to us is:
Mass of sodium chloride (NaCl) = 4.50 g
Volume of solution = 70.0 ml
First, we need to convert the volume of the solution from milliliters to liters:
Volume of solution = 70.0 ml = 70.0 ml × (1 L / 1000 ml)
Volume of solution = 0.070 L
Next, we can calculate the weight/volume percent concentration using the formula:
Weight/volume percent = (Mass of solute / Volume of solution) × 100
Plugging in the values:
Weight/volume percent = (4.50 g / 0.070 L) × 100
Weight/volume percent = 64.29%
Therefore, the concentration of sodium chloride in units of weight/volume percent is approximately 64.29%.
Learn more about concentration here:
https://brainly.com/question/10720472
#SPJ 4
A tank contains 6 liters of water in which is dissolved 24 grams of chemical. A solution containing 1 g/L of the chemical flows into the tank at a rate of 4 L/min, and the well-stirred mixture flows out at a rate of 3 L/min. Let x(t) be the amount of the chemical in the tank after t minutes since the solution containing the chemical begins to flow into the tank.
How long will it take to reduce the chemical concentration in the tank to 2 g/L?
It will take 8 minutes to reduce the chemical concentration in the tank to 2 g/L.
Let x(t) be the amount of the chemical in the tank after t minutes since the solution containing the chemical begins to flow into the tank.
There are 6 liters of water in which 24 grams of chemical is dissolved. So, the concentration of the chemical in the tank is `24/6 = 4 g/L`.
Let t be the time in minutes it takes to reduce the concentration of the chemical to 2 g/L.
During the time interval from 0 to t minutes, the amount of chemical in the tank decreases from 4t grams to 2t grams.
The change in the amount of chemical in the tank is:
`x'(t) = - 4t/6 + 1 x 4/60`
Simplifying gives:
`x'(t) = -2t/15 + 1/15`
Now, let's solve for t such that
x(t) = 2 g/L.
Since x'(t) is the rate of change of x(t), we have:
`x'(t) = (dx)/(dt)``dx/dt
= -2t/15 + 1/15``2x/15 - x/15
= t``t = x/15`
We want to find the time t it takes to reduce the chemical concentration in the tank to 2 g/L.
The concentration of the chemical in the tank is 4 g/L initially, so the amount of chemical to be removed is:
`24 - 2 * 6 = 12`
The rate of removal of the chemical is 3 L/min, so it will take:`12/(3 * 2) = 2 minutes`
to remove all the chemical.
Therefore, the time it will take to reduce the chemical concentration in the tank to 2 g/L is:
`t = x/15 = 2/15 x 60 = 8 minutes`
Learn more about time interval from the given link:
https://brainly.com/question/28238258
#SPJ11
What was the maximum temperature reached when you combine 25 grams of zinc (Zn) with hydrochloric acid (HCl)
To determine the maximum temperature reached when combining zinc (Zn) with hydrochloric acid (HCl), we need to consider the heat of the reaction between zinc and hydrochloric acid. The reaction between zinc and hydrochloric acid is highly exothermic, meaning it releases heat.
The balanced chemical equation for the reaction is:
Zn + 2HCl -> ZnCl2 + H2
From the equation, we can see that one mole of zinc reacts with two moles of hydrochloric acid to produce one mole of zinc chloride and one mole of hydrogen gas.
To calculate the maximum temperature reached, we need additional information such as the initial concentration or volume of hydrochloric acid and the specific heat capacity of the system. Without these details, it is not possible to provide an exact value for the maximum temperature reached.
The maximum temperature reached during the reaction depends on various factors, including the quantities of reactants, their initial temperatures, the rate of the reaction, and the heat transfer properties of the system.
Therefore, to determine the maximum temperature accurately, specific experimental conditions or additional information would be required.
Learn more about hydrochloric acid (HCl) from the given link!
https://brainly.com/question/29352382
#SPJ11
g the solubility product constant for sodium fluoride is > 1. if sodium fluoride is dissolved in water you can say that the equilibrium concentrations of sodium and fluoride ions are:
When sodium fluoride is dissolved in water, the equilibrium concentrations of sodium and fluoride ions are relatively high due to the solubility product constant being greater than 1.
The solubility product constant (Ksp) is a measure of the extent to which a solid substance dissolves in water to form ions. For sodium fluoride (NaF), the Ksp is greater than 1.
When sodium fluoride is dissolved in water, it dissociates into sodium (Na+) ions and fluoride (F-) ions. The equilibrium concentrations of these ions depend on the solubility product constant and the initial concentration of the sodium fluoride.
Since the Ksp for sodium fluoride is greater than 1, it indicates that the equilibrium concentrations of the sodium and fluoride ions are relatively high. This means that a significant amount of sodium fluoride dissolves in water and forms a large concentration of sodium and fluoride ions.
To give you an example, let's say you have a solution of sodium fluoride with an initial concentration of 0.1 M. After it dissolves, the equilibrium concentrations of sodium and fluoride ions might be 0.08 M and 0.08 M, respectively. These concentrations would reflect the fact that a significant amount of sodium fluoride has dissociated into its ions.
You can learn more about solubility products at: brainly.com/question/1419865
#SPJ11
specifically blocks the release of ach from axon terminals at the injection site
Botulinum toxin specifically blocks the release of ACh from axon terminals at the injection site. Option B is correct.
This is a kind of protein toxin produced by the bacterium Clostridium botulinum. This toxin blocks the release of acetylcholine, a neurotransmitter, from the axon terminals at the injection site, thereby paralyzing the target muscle(s) and causing flaccid paralysis.
Curare is a drug that blocks the receptor sites for acetylcholine on the motor end plate. Tetrodotoxin is a potent neurotoxin that binds to fast voltage-gated sodium channels, inhibiting the flow of sodium ions into cells and resulting in the prevention of action potential initiation and propagation.
Cocaine interferes with the reuptake of dopamine, serotonin, and norepinephrine, increasing the synaptic concentrations of these neurotransmitters and resulting in the characteristic “high” associated with the drug.In the case of botulinum toxin, it blocks the release of ACh from axon terminals at the injection site.
ACh is a neurotransmitter that plays a critical role in muscle contraction, and when its release is blocked, the muscle(s) affected by the toxin are unable to contract, leading to flaccid paralysis. The given question is a part of the topic neuromuscular junction and action potential.
Therefore, Option B is correct.
Learn more about Botulinum -
brainly.com/question/28538555
#SPJ11
"
Oxygen to three significant figures? Oxygen to two significant figures? Oxygen to two decimal places?? Sodium to three significant figures? 16. Balance the following equation:C2H6+O2------>CO2+H2O
"
The number 8.00 represents oxygen with three significant figures because oxygen is being used and CO2 is produced as a byproduct. The balanced equation for C2H6 + O2 --> CO2 + H2O is as follows:2 C2H6 + 7O2 --> 4CO2 + 6H2O
Oxygen to two significant figures: The number 8.0 represents oxygen with two significant figures.Sodium to three significant figures: The number 22.99 represents sodium with three significant figures.Oxygen to two decimal places:
The number 8.00 represents oxygen with two decimal places. The balanced equation shows that in order to produce 4 molecules of CO2, 2 molecules of ethane react with 7 molecules of O2 to produce 6 molecules of H2O as well. , where the last zero is considered to be significant. combustion occurs
This reaction shows that combustion occurs because oxygen is being used and CO2 is produced as a byproduct.
Know more about balanced equation here:
https://brainly.com/question/31242898
#SPJ11
if
you could explain the answer, thank you!
1. Draw all the important resonance structures for the following ion showing all lone pairs of electrons, foal charges and double bonds. Show the electron flow by using arrows for full credit. (6 po
The given ion is not mentioned in the question; therefore, I am unable to provide the exact resonance structures for that ion. However, I can provide you with an example of how to draw resonance structures for an ion and illustrate the electron flow using arrows. Let's consider the nitrate ion (NO3-). Resonance structures are drawn to explain the delocalization of electrons and the stability of ions.
Resonance structures are formed by shifting electron pairs from double bonds and lone pairs to form new multiple bonds and achieve octet configurations. Below are the resonance structures for the nitrate ion, along with the electron flow indicated by arrows:
Resonance structures for the nitrate ion (NO3-):
- Electron flow by using arrows:
In the above resonance structures, each oxygen atom is equivalent, and there is no double bond character in the molecule. All the atoms in these structures have full octet configurations, and the formal charge on each oxygen atom is -1. The arrows represent the movement of electron pairs. A double-headed arrow is used to indicate the movement. In the first structure, the double bond between one of the oxygen atoms and the nitrogen atom breaks, and the two electrons move towards the nitrogen atom. In the second structure, the lone pair on the nitrogen atom moves to form a double bond between nitrogen and one of the oxygen atoms. In the third structure, the double bond between another oxygen atom and the nitrogen atom breaks, and the two electrons move towards the nitrogen atom. These resonance structures illustrate the delocalization of electrons and the stability of the nitrate ion.
To know more about electrons visit:
https://brainly.com/question/12001116
#SPJ11
Consider this reaction: 2H3PO4(aq)→P2O5(aq)÷3H2O(aq) At a certain temperature it obeys this rate law. rate =(0.113 s−1)[H3PO4] Suppose a vessel contains H3PO4 at a concentration of 1.07M. Calculate the concentration of H3PO4 in the vessel 6.20 seconds later. You may assume no other reaction is important. Round your answer to 2 significant digits.
The concentration of H3PO4 in the vessel 6.20 seconds later is 0.99 M. Concentration refers to the amount of solute present in a given quantity of solvent or solution. It quantifies the relative abundance or strength of a substance in a mixture.
Consider the given reaction, [tex]2H3PO4(aq)→P2O5(aq)+3H2O(aq)[/tex]
The rate law of the reaction is: rate [tex]=(0.113 s⁻¹)[H3PO4][/tex]
The initial concentration of H3PO4 is 1.07M
.Therefore, the concentration of H3PO4 after time t is given as:
rate = [tex]k[H3PO4]rate / [H3PO4] = k(0.113 s⁻¹)[/tex]
= (1/t)[H3PO4]/[H3PO4]
[tex]= 0.113 / tM.t[/tex]
[tex]= 6.20 s[H3PO4][/tex]
[tex]= 1.07 M x e^(-0.113/6.20)[/tex]
= 0.986 M
= 0.99 M (rounded to two significant digits)
Therefore, the concentration of H3PO4 in the vessel 6.20 seconds later is 0.99 M.
To know more about concentration visit :
https://brainly.com/question/30862855
#SPJ11
please answer both it will be very helpful! also for the first
question can you please include a descrpition with the diagram
thank you!
Question 4. Below is the interior of the Cary 50 and a cuvette in which a dye is placed for measurement of its absorbance. Draw the orientation of the cuvette with regard to collection of signal and e
The Cary 50 is an instrument that measures the absorbance of a solution, such as a dye, at various wavelengths.
A cuvette is used to hold the dye while it is being measured. In order to collect the maximum signal, the cuvette should be oriented in a specific way. This orientation is with the two polished sides of the cuvette perpendicular to the beam path. By doing so, the majority of the light is transmitted through the sample and received by the detector. If the cuvette is oriented with its polished sides parallel to the beam path, very little light will be transmitted through the sample, and the signal collected will be minimal.
Learn more about the Cuvette:
https://brainly.com/question/7005538
#SPJ11
2) You have a solution of lead used to make analytical standards ([Pb] =1001±1 parts-perbillion). You are diluting this to a 12ppb solution by adding 3.00±0.02 mL of the 1001ppb lead solution to a 250.0±0.2 mL with Class A volumetric glassware. Which te (the uncertainty associated with the 3 mL pipette, the uncertainty associated with the 250 mL flask, or the concentration of the concentrated solution) dominates the calculated relative uncertainty? a) The Concentrated Lead Solution b) The 250 mL flask c) The 3 mL Pipette
The uncertainty associated with the 3 mL pipette dominates the calculated relative uncertainty.
When diluting the lead solution, the concentration of the resulting solution depends on the volume measurements and the concentration of the concentrated lead solution. To determine which factor dominates the calculated relative uncertainty, we need to consider the contributions from each source of uncertainty.
The concentration of the concentrated lead solution is given as 1001±1 parts-per-billion (ppb). The uncertainty associated with this concentration is relatively small compared to the uncertainties in the volume measurements. Therefore, the concentration of the concentrated solution is not the dominant factor in the calculated relative uncertainty.
On the other hand, the volume measurements involve two components: the 3 mL pipette and the 250 mL flask. The uncertainty associated with the 3 mL pipette is given as 0.02 mL, while the uncertainty associated with the 250 mL flask is given as 0.2 mL.
The pipette uncertainty is significantly smaller than the flask uncertainty. Since the relative uncertainty is calculated by dividing the absolute uncertainty by the measured value, the smaller the absolute uncertainty, the larger the relative uncertainty.
Therefore, the uncertainty associated with the 3 mL pipette dominates the calculated relative uncertainty because its absolute uncertainty is smaller compared to the uncertainty associated with the 250 mL flask.
Learn more about Pipette
brainly.com/question/33360488
#SPJ11
Covalent bonds do not play an important role in protein
structure, why?
A. Only one amino acid, cysteine, can fo covalent bonds in
protein structure
B. Covalent bonds are highly susceptible to hydro
The correct answer is option A: Only one amino acid, cysteine, can form covalent bonds in protein structure.
Covalent bonds do play a vital role in protein structure. A covalent bond is a bond that is formed by sharing electrons between two atoms, and it is very strong.
Amino acids, which are the building blocks of proteins, are held together by covalent bonds in a linear chain. The covalent bonds between amino acids are known as peptide bonds.The only amino acid that can form covalent bonds in protein structure is cysteine. It is a sulfur-containing amino acid that forms a disulfide bond.
Cysteine residues can form disulfide bonds with one another, which contribute to the three-dimensional structure of proteins.The primary structure, secondary structure, tertiary structure, and quaternary structure of proteins are all defined by the covalent bonds that hold the amino acid chains together.
Consequently, covalent bonds play a crucial role in the structure and function of proteins.
Thus, the correct answer is option A.
To learn more about proteins :
https://brainly.com/question/10058019
#SPJ11
, Describe how ozone is formed naturally in the stratosphere?
5, Explain why ozone levels fluctuate seasonally in the stratosphere?
6, Identify the types of compounds that are most responsible for the thinning of the stratospheric ozone layer?
Ozone is formed naturally in the stratosphere due to the photodissociation of oxygen. The photodissociation of oxygen molecules that occurs when they absorb high-energy ultraviolet radiation, specifically radiation with a wavelength between 240 and 310 nanometers (nm), causes the formation of ozone.
However, ozone levels fluctuate seasonally in the stratosphere due to the changes in temperature, wind patterns, and the amount of sunlight that enters the atmosphere. During the winter season in polar regions, the stratosphere experiences extreme cold temperatures that cause polar stratospheric clouds to form. These clouds lead to the formation of chlorine and bromine compounds that can destroy ozone. As a result, the ozone layer thins, and there is a seasonal hole in the ozone layer over Antarctica,
which is more than 100 times larger than the average size of the United States. Thinning of the stratospheric ozone layer is primarily due to the release of human-made compounds called halocarbons, including chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and other halogenated compounds. These compounds break down and release chlorine and bromine, which can destroy ozone.
To know more about radiation visit:
https://brainly.com/question/31106159
#SPJ11
At a certain temperature, the equilibrium constant for the chemical reaction shown is 1.32×10 −3
. At equilibrium, the concentration of AB is 1.725M, the concentration of BC is 2.925M, and the concentration of AC is 0.250M. Calculate the concentration of B at equilibrium. AB(aq)+BC(aq)⇌AC(aq)+2 B(aq)
The concentration of B at equilibrium is calculated using the equilibrium constant expression and the given values. The concentration of B is approximately 8.77 × 10⁻³ M.
Let's denote the concentration of B at equilibrium as [B]. According to the stoichiometry of the balanced chemical equation, the concentration of B in the equilibrium expression is squared (2B(aq))² = 4[B]².
The equilibrium constant expression for the given reaction is:
K = ([AC] * [B]²) / ([AB] * [BC])
Plugging in the given values and the expression for B:
1.32×10⁻³ = (0.250M * (4[B]²)) / (1.725M * 2.925M)
Simplifying the equation:
1.32×10⁻³ = (1M * [B]²) / (2M * 2.925M)
1.32×10⁻³ = [B]² / 5.85
Now, let's solve for [B]:
[B]² = 1.32×10⁻³ * 5.85
[B]² = 7.692×10⁻⁶
Taking the square root of both sides:
[B] ≈ 8.77×10⁻³ M
Therefore, the concentration of B at equilibrium is approximately 8.77×10⁻³ M.
To know more about equilibrium constant expression refer here :
https://brainly.com/question/29410005#
#SPJ11
If a reaction starts woith 0.480 mol Mg, how many moles of silver are produced?
Answer:
The reaction you are referring to is:
Mg + 2AgNO3 → Mg(NO3)2 + 2Ag
0.960 moles of silver will be produced
Explanation:
The balanced equation shows that 1 mole of Mg reacts with 2 moles of AgNO3 to produce 2 moles of Ag.
If we start with 0.480 moles of Mg, then we will produce 0.480 * 2 / 1 = 0.960 moles of Ag.
Here is the calculation:
Number of moles of Ag produced = (Number of moles of Mg) * (Moles of Ag produced per mole of Mg)
= 0.480 moles * 2 moles/mole
= 0.960 moles
Therefore, 0.960 moles of silver will be produced if the reaction starts with 0.480 moles of Mg.
State whether each of these is a hypothesis, observation, theory, experiment, or law (type H, O, T, E, or L). Dropping objects and measuring how fast they fall - A mathematical equation describing how objects fall - A proposed explanation of why objects fall - A proven description of how and why objects fall -
The experiment (E) involves dropping objects and measuring their fall, the mathematical equation represents a theory (T), the proposed explanation is a hypothesis (H), and the proven description is also a theory (T).
Dropping objects and measuring how fast they fall can be considered an experiment (E). It involves conducting an empirical investigation to gather data on the speed at which objects fall.
A mathematical equation describing how objects fall can be classified as a theory (T). The equation represents a systematic and well-substantiated explanation of the phenomenon of falling objects, based on mathematical principles and empirical observations.
A proposed explanation of why objects fall can be categorized as a hypothesis (H). It is a tentative statement or prediction that suggests a potential reason for the observed phenomenon of objects falling. Hypotheses are typically tested through experiments.
A proven description of how and why objects fall can be regarded as a theory (T). It signifies a well-established and widely accepted explanation that has been extensively tested and supported by empirical evidence. The term "proven" should be used cautiously, as scientific knowledge is always subject to revision based on new evidence.
For more such questions on equation
https://brainly.com/question/11904811
#SPJ8
5.7 In table format, list two uses for sulphuric acid and two uses for calcium oxychloride. (4 ma
Sulphuric acid is a colorless and odorless liquid. Its chemical formula is H2SO4. It is commonly used in many industries due to its reactivity and acidic nature.
Here are two common uses for sulphuric acid: Manufacture of fertilizers: Sulphonic acid is used to produce fertilizers such as ammonium sulphate, superphosphate of lime, and ammonium phosphates. These fertilizers help increase crop yield and improve soil fertility. Industrial cleaning agent: Sulphonic acid is used to clean metals and other materials in many industries. It is also used to clean iron and steel before they are coated or painted .Calcium oxychloride is a white powder. Its chemical formula is Ca(ClO)2.
To know more about chemical formula visit:
brainly.com/question/18441768
#SPJ11
rank the following in order of decreasing δ and energy of light absorbed. a: [cr(en)3]3 b: [cr(cn)6]3− c: [crcl6]3−
The order of decreasing δ and energy of light absorbed for the compounds [Cr(en)3]3+, [CrCl6]3-, and [Cr(CN)6]3- is as follows: [Cr(en)3]3+ > [CrCl6]3- > [Cr(CN)6]3-.
In the given order, [Cr(en)3]3+ has the highest value of δ and absorbs light with the highest energy. This can be attributed to the presence of the ethylenediamine ligands (en), which are strong field ligands. The strong field ligands cause a larger splitting of the d-orbitals in the central chromium ion, resulting in a higher energy gap between the ground state and excited states. Therefore, [Cr(en)3]3+ exhibits a higher δ and absorbs light with higher energy.
On the other hand, [Cr(CN)6]3- has the lowest value of δ and absorbs light with the lowest energy. This is because cyanide ligands (CN) are weak field ligands, leading to a smaller splitting of the d-orbitals and a lower energy gap. As a result, [Cr(CN)6]3- has the lowest δ and absorbs light with lower energy compared to the other two compounds.
In between these, [CrCl6]3- falls in the middle with intermediate values of δ and energy of light absorbed. Chloride ligands (Cl) are moderately strong field ligands, causing a moderate splitting of the d-orbitals and an intermediate energy gap.
In summary, the order of the compounds with decreasing δ and energy of light absorbed is [Cr(en)3]3+ > [CrCl6]3- > [Cr(CN)6]3-. This order is determined by the strength of the ligands and the resulting splitting of the d-orbitals, which influences the energy gap and the energy of light absorbed by the compounds.
cyanide https://brainly.com/question/13246521
#SPJ11
according to the techniques manual (technique 16), what are the four criteria that must be satisfied in order to successfully use sublimation to purify an organic compound.
Sublimation is a purification technique that is widely used in the chemical industry. It is a process where a solid compound goes directly into the vapor phase when heated. The technique can be used to purify compounds such as camphor, naphthalene, anthracene, and benzoic acid.
The technique is particularly useful when the compound is heat-stable, has a high vapor pressure, and has a high molecular weight. The sublimation technique is highly selective and helps in removing unwanted impurities in a chemical compound. To use sublimation as a purification technique, four criteria must be met.
They are as follows:
1. The compound to be purified must be stable at the temperature used in the sublimation process. The temperature must not be so high that the compound undergoes decomposition.
2. The vapor pressure of the compound should be high enough to allow the sublimation process to occur.
3. The impurities present in the compound must have a lower vapor pressure than the compound to be purified. This is because, during the sublimation process, the compound with a higher vapor pressure moves to the vapor phase, while the impurities remain behind.
4. The impurities present in the compound should be decomposed or destroyed at the temperature used in the sublimation process. This is to ensure that the impurities do not get carried over into the final product.
The sublimation process is highly efficient in purifying organic compounds. It can be carried out under vacuum conditions to reduce the temperature required for the sublimation process. Additionally, the sublimation process is eco-friendly as it does not use any solvents or reagents. The sublimation technique is, therefore, a highly recommended technique for the purification of organic compounds.
Learn more about organic compounds from the given link:
https://brainly.com/question/13508986
#SPJ11
1. Which of the following structures is nod consistent with rules for drawing Lewis structures? (AIl nonbonding lome pairs of electrons and atoms are drawn ar intended.)
In the following Brønsted-Lo
To represent nitrous acid (HNO2) using its Lewis structure, we can follow certain rules:
1. Determine the total number of valence electrons in the molecule. Nitrous acid consists of one hydrogen atom (H), one nitrogen atom (N), and two oxygen atoms (O). The total number of valence electrons is calculated as follows: 5 (N) + 2(6) (O) + 1 (H) = 14.
2. Connect the atoms with single bonds.
3. Arrange the remaining electrons in pairs around the atoms to satisfy the octet rule (or the duet rule for hydrogen). In this case, we need to place the remaining 12 electrons in six pairs around the three atoms: N, H, and O.
4. Count the number of electrons used in bonding and subtract it from the total number of valence electrons to determine the number of non-bonding electrons or lone pairs.
5. Check the formal charge of each atom. In the Lewis structure of nitrous acid, the formal charges are: N = 0, O1 = -1, O2 = 0, and H = +1.
To know more about electrons visit:
https://brainly.com/question/15885173
#SPJ11
Calculate the mass of silver chloride required to plate 145mg of pure silver.
To calculate the mass of silver chloride required to plate 145mg of pure silver, we need to consider the stoichiometry of the reaction involved. The reaction is as follows:
2AgCl + 2e- → 2Ag + Cl2
From this balanced equation, we can see that 2 moles of AgCl are required to produce 2 moles of Ag. The molar mass of silver (Ag) is approximately 107.87 g/mol. Therefore, to find the mass of AgCl needed, we can use the following calculation:
(145 mg Ag) × (1 g / 1000 mg) × (1 mol Ag / 107.87 g) × (2 mol AgCl / 2 mol Ag) × (143.32 g / 1 mol AgCl) = 0.154 g AgCl
So, approximately 0.154 grams of silver chloride (AgCl) would be required to plate 145mg of pure silver. It is important to note that this calculation assumes 100% efficiency in the plating process and complete conversion of AgCl to Ag. In practice, some losses or inefficiencies may occur during the electroplating process, so a slight excess of AgCl might be needed to ensure complete coverage of the silver surface.
chloride https://brainly.com/question/15838207
#SPJ11
The activation energy for the forward reaction is _____.
a
d
c
b
The activation energy for the forward reaction is a (1st option)
How do i determine the activation for the forward reaction?Activation energy is simply defined as the minimum energy required for reaction to occur.
However, for energy profile diagrams, the activation energy is simply the energy difference between the peak energy and the energy of the reactants.
Considering the diagram given, we can see that letter a exist between the peak energy and the energy of the reactant.
Thus, we can conclude from the above information that the activation energy for the forward reaction is a (1st option)
Learn more about activation energy:
https://brainly.com/question/29060218
#SPJ1
