Answer:
no reaction will occur.
Explanation:
The term ''activity series'' in chemistry is used to describe the series of metals and non metals arranged in an orderly manner of reactivity which is usually arranged from the most active elements to the least reactive elements.
So, from the question we are given that F > Cl > Br > I. This means that Fluorine, F is the most reactive element in this group of non metals[group seven in the periodic chart/table], while the least reactive element is the Iodine, I.
Hence, Cl, Br and I can not displace F in any chemical reaction since they are less reactive as compared to F.
Therefore, the reaction; Br2 + NaF will not occur because Bromine can not displace Fluorine. Fluorine is more reactive than Bromine
Answer:
A
Explanation:
EDGE
Which of these elements is the odd one out? Li Na Mg K Rb Cs
Answer: cc
Explanation:..
a 182.4g sample of germanium-66 is left undisturbed for 22.5 hours. At the end of that period, only 5.70g remain. What is the half-life of this material?
Answer:
Approximately [tex]4.5\; \text{hours}[/tex].
Explanation:
Calculate the ratio between the mass of this sample after [tex]22.5\; \text{hours}[/tex] and the initial mass:
[tex]\displaystyle \frac{5.70\; \rm g}{182.4\; \rm g} \approx 0.03125[/tex].
Let [tex]n[/tex] denote the number of half-lives in that [tex]22.5\; \text{hours}[/tex] (where [tex]n\![/tex] might not necessarily be an integer.) The mass of the sample is supposed to become [tex](1/2)[/tex] the previous quantity after each half-life. Therefore, if the initial mass of the sample is [tex]1\; \rm g[/tex] (for example,) the mass of the sample after [tex]\! n[/tex] half-lives would be [tex]{(1/2)}^{n}\; \rm g[/tex]. Regardless of the initial mass, the ratio between the mass of the sample after [tex]n\!\![/tex] half-lives and the initial mass should be [tex]{(1/2)}^{n}[/tex].
For this question:
[tex]{(1/2)}^{n}} = 0.03125[/tex].
Take the natural logarithm of both sides of this equation to solve for [tex]n[/tex]:
[tex]\ln \left[{(1/2)}^{n}}\right] = \ln (0.03125)[/tex].
[tex]n\, [\ln(1/2)] = \ln (0.03125)[/tex].
[tex]\displaystyle n = \frac{\ln(0.03125)}{\ln(1/2)} \approx 5[/tex].
In other words, there are [tex]5[/tex] half-lives of this sample in [tex]22.5\; \text{hours}[/tex]. If the length of each half-life is constant, that length should be [tex](1/5) \times 22.5\; \text{hours} = 4.5\; \text{hours}[/tex].
There is no _____ movement in a strike-slip fault, meaning there are no mountain ranges.
Answer:
isostatic adjustment movement
He reaction produces 1.6 g of gas in 30 seconds.Calculate the mean rate of the reaction in the first 30 seconds.Use the equation:
Answer:
Mean rate of reaction produced = 0.533 g/sec (approx.)
Explanation:
Given:
Reaction produced = 1.6 gram
Time taken = 30 sec
Find:
Mean rate of reaction produced
Computation:
Mean rate of reaction produced = Reaction produced / Time taken
Mean rate of reaction produced = 1.6 / 30
Mean rate of reaction produced = 0.533 g/sec (approx.)
I need help with this
Answer: B
Explanation: All you have to do to find out if an equation is balanced is count the number of atoms on each side. To be balanced, they must be equal.
In case you didn’t know: The number in front of an element or compound means that you will multiply. For instance, 2AlBr3 would have 2 Al atoms and 6 Br atoms. The subscript number just means how many atoms there are in that compound.
How can we determine the number of significant figures in measurements?
Answer:
Rule 1: All nonzero digits in measurement are significant.
Rule 2: Zeros that appear between other nonzero digits (i.e., "middle zeros") are always significant.
Rule 3: Zeros that appear in front of all of the nonzero digits are called leading zeros. Leading zeros are never significant.
Rule 4: Zeros that appear after all nonzero digits are called trailing zeros. A number with trailing zeros that lacks a decimal point may or may not be significant.
Rule 5: Trailing zeros in a number with a decimal point are significant. This is true whether the zeros occur before or after the decimal point.
2)
Compare the atomic radius of an atom of bromine to the atomic radius of an atom
potassium when both atoms are in the ground state.
What do the elements Ni, and Tc have in common?
Answer:
I know that
Explanation:
nickel is like to and tc is like nickel they both have something
3 points
44. Name one similarity and one difference between compounds and
homogeneous mixtures.
Your answer
Hey there!
Elements and compounds are purely homogeneous substances and they have a constant composition throughout. Elements and compounds cannot be separated into their respective constituents by physical means. Compounds and mixtures are made up of different elements or different atoms.
please answer Seed plants are divided into two groups. What are they? GIVING BRIANLIEST TO WHOEVER IS RIGHT.
vascular and nonvascular
brown seeds and green seeds
nonflowering and flowering
fruits and vegetables
Answer: nonflowering and flowering
Explanation: i just did the quiz
Seed plants are divided into two groups, are nonflowering and flowering plants. Therefore, option C is correct.
What is flowering plant ?Flowering plants create blooms, which they then use as seeds to develop more of their kind or other plants. Nonflowering plants don't produce flowers; instead, they produce microscopic reproductive components called seeds or spores that can be used to create additional plants that look exactly like them.
Gymnosperms and angiosperms are frequently used as arbitrary divisions for the seed plants. The difference between the two is based on the fact that angiosperms produce blooms, whereas gymnosperms do not.
An ovary surrounds the angiosperm seed. A seed grows on the size of a cone in gymnosperms. Inside an ovary, only an angiosperm seed can grow.
Thus, option C is correct.
To learn more about flowering plant, follow the link;
https://brainly.com/question/19601929
#SPJ2
HELP ASAP WILL MARK BRAINLIEST!!!
Answer:
22.4/3.8=5.89
Explanation:
An example of a chemical change is
Mashing potatoes
Dew disappearing from the grass
Frying a hamburger
A magnet sticking to the refrigerator
Answer:
Frying a hamburger
Explanation:
when frying a hamburger you change the properties of the meat by applying heat and in the other answer choices the element is not changed.
Which atom has the largest atomic radius? *
K
Fr
Cs
Rb
What is the mass of 5.26 mol Fe2(SO4)3?
Answer in units of g.
2100 g Fe₂(SO₄)₃
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Stoichiometry
Using Dimensional AnalysisAtomic Structure
Reading a Periodic TableExplanation:Step 1: Define
5.26 mol Fe₂(SO₄)₃
Step 2: Identify Conversions
Molar Mass of Fe - 55.85 g/mol
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of Fe₂(SO₄)₃ - 2(55.85) + 3(32.07) + 12(16.00) = 399.91 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 5.26 \ mol \ Fe_2(SO_4)_3(\frac{399.91 \ g \ Fe_2(SO_4)_3}{1 \ mol \ Fe_2(SO_4)_3})[/tex]Multiply/Divide: [tex]\displaystyle 2103.53 \ g \ Fe_2(SO_4)_3[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
2103.53 g Fe₂(SO₄)₃ ≈ 2100 g Fe₂(SO₄)₃
What is the difference between reactants and products?
Answer:
The reactants are the substances that start the chemical reaction. The products are the substances that are produced in the chemical reaction.
Explanation:
What is the difference between reactants and products?
Answer:Reactants It is a substance that is present at the start of a chemical reaction.The substance(s) to the left of the arrow in a chemical equation. Products It is a substance that is present at the end of a chemical reaction.The substance(s) to the right of the arrow. #CARRYONLEARNING #STUDYWELLNeed help ASAP. Gave only 10 min
Answer:
Explanation:
If it interests you, you could check out Maxwell's demon. If he is not in operation (and he likely isn't), then the answer is D.
Heat always transfers from hot to cold -- at least at beginning levels of chemistry.
I need to turn this in a 3:00 sharp
Answer:
i think their is amswer key for that
Explanation:
1. By means of orbital diagrams, write down the
electronic configurations of these elements.
(a) Sodium
(e) Magnesium
(b) Aluminium (f) Silicon
(c) Phosphorus (g) Sulphur
(d) Chlorine
(h) Argon
Answer:
a) 1s22s22p63s1
b) 3s² 3p¹
c) 1s22s22p63s23p3
d) 3s² 3p⁵
e) 3s2
f) 1s22s22p63s23p2
g) 1s22s22p63s23p4
h) 3s² 3p⁶
If you could zoom enough to see atoms how would u find out if it is a compound element or a
mixture
Question 13 (5 points)
(01.06 MC)
The gas carbon dioxide is a pure substance. Which of the following is true about carbon dioxide?
Options:
It can be separated into carbon and oxygen using physical methods.
Carbon and oxygen retain their original identity in it.
Carbon and oxygen are chemically bonded in it.
Explanation:
Sorry the guy asking forgot to put in the options so comment below the correct answer and brainy STOP DISABLING COMMENTS YOUR CAUSING SO MANY INCORRECT THINGS
How many atoms are in 2.00 x 10^-7 moles of Helium
Answer:
1.20 10^17
Explanation:
convert to atoms using Avogadro's number
2.00 x 10^-7 moles * 6.022 X 10^23 atoms= 1.20 10^17
How many atoms of oxygen are in a molecule of glucose (C6H12O6)?
Record your answer. Be sure to use the correct place value.
Answer:
There are 6 oxygen atoms.
Explanation:
Glucose has a chemical formula of: C6H12O6 That means glucose is made of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms.
hope this helps
The molecular formula of glucose is C₆H₁₂O₆, therefore one molecule of glucose has six oxygen atoms.
What is the chemical formula?A chemical formula is a way of representing information about the chemical proportions of atoms of each element that are present in a molecule or chemical compound. The chemical formula can be written by using chemical symbols, numbers, and other symbols, such as commas, dashes, brackets, and plus (+) and minus (−) signs.
A chemical formula of a compound contains no words but can represent certain simple chemical structures. Chemical formulae are usually more limited in power than structural formulae and chemical names. There are two types of chemical formulas one empirical formula and another molecular formula.
In a molecular formula, more than one atom of the same element can be represented by subscripts. The given formula of glucose is C₆H₁₂O₆ and the total number of oxygen atoms in the formula is equal to six.
Learn more about chemical formula, here:
brainly.com/question/11140581
#SPJ2
What is the chemical formula for carbon fibre? (specifically if possible)
Answer: 90% Polyacrylonitrile (PAN)
(C3H3N)n - n signifies the chain
10% Rayon & Pitch Base
Explanation:
Just Because...
Come up with another way to separate certain mixture?
Answer:
Oil
Explanation:
Which of the following is a compound?
Group of answer choices
Nitrogen
Oxygen
Hydrogen
Carbon Dioxide
Answer:
carbon dioxide
it is made up of carbon and oxygen.
Balance the chemical equation below using the smallest possible whole number stoichiometric coefficients.
P4(s)+NaOH(aq)+H2O(l)➪
PH3(g)+Na2HPO3(aq)
Answer:
P₄ + 4NaOH + 2H₂O → 2PH₃ + 2Na₂HPO₃
Explanation:
The given reaction expression is given as:
P₄ + NaOH + H₂O → PH₃ + Na₂HPO₃
To solve this problem, now we put coefficients a, b, c, d and e and we use a mathematical approach to solve this problem;
aP₄ + bNaOH + cH₂O → dPH₃ + eNa₂HPO₃
Conserving P: 4a = d + e
Na: b = 2e
O: b + c = 3e
H: b + 2c = 3d + e
let b = 1, e = [tex]\frac{1}{2}[/tex] , c = [tex]\frac{1}{2}[/tex], d = [tex]\frac{1}{2}[/tex], a = [tex]\frac{1}{4}[/tex]
Multiply through by 4;
b = 4, e = 2, c = 2, d = 2, a = 1
P₄ + 4NaOH + 2H₂O → 2PH₃ + 2Na₂HPO₃
Four grams of magnesium react with an excess of dilute hydrochloric acid. Calculate the volume in liters of hydrogen gas collected over water at 300 K, if the vapor pressure of water at that temperature is 26.7 mm and the barometric pressure is 730 mm
PLSS ANSWERRRR
Earthquakes are relatively common throughout the west coast, especially in California. The map of California seen here gives you an idea why. Explain what is happening along with the red arrows on the map.
A.) The Pacific Plate and the North American plate are diverging.
B.) The sea floor is spreading where the Pacific and North American plates meet. (Converge)
C.) There is a transform boundary, commonly causing strike-slip faults, between the Pacific and the North American plates.
D.) There is a convergent plate boundary between the oceanic and continental plates.
Answer:
b
Explanation:
12 points and brainest
Answer:
wavelength
Explanation:
Answer:
wavelength
Explanation:
write the fraction of the mass of kcl produced from 1 g of k2c03
Mass of KCl= 1.08 g
Further explanationGiven
1 g of K₂CO₃
Required
Mass of KCl
Solution
Reaction
K₂CO₃ +2HCl ⇒ 2KCl +H₂O + CO₂
mol of K₂CO₃(MW=138 g/mol) :
= 1 g : 138 g/mol
= 0.00725
From the equation, mol ratio K₂CO₃ : KCl = 1 : 2, so mol KCl :
= 2/1 x mol K₂CO₃
= 2/1 x 0.00725
= 0.0145
Mass of KCl(MW=74.5 g/mol) :
= mol x MW
= 0.0145 x 74.5
= 1.08 g
